SOLAR MPPT Solar Charge Controller Sart2 Sart2 40A 50A 60A Introduction This is a solar charge controller 40A ~60A that have autoatic ax. power point tracking function with high efficiency that alost 30%~60% higher than traditional charge controller. It also features the functions of voltage auto recognition, wide rang of PV input,charge for all kinds of battery,autoatic discharge control,rs 232 / LAN counication function and so on. It is very high-end product for solar arket. Feature 1.MPPT charge ode,conversion efficiency upto 99%. 2. auto recognize. 3.Wide range of PV input with ax. is DC150V. 4.Unliited parallel connection. 5.Journal function, Save function set,date,tie,generating capacity and so on. 6.Charge ode: three stages (fast charge,constant charge,floating charge).it prolongs service life of the batteries. 7.Discharge ode: ON/OFF ode, double tie control ode,pv voltage control ode,pv voltage+tie delay ode and so on. 8.Recoended battery types: sealed lead acid, vented, gel,nicd battery. Other types of the batteries can also be defined. 9.Most inforation could be provide by LCD and LED like: odel no,pv input voltage,battery type,battery voltage,charging current,charging power,working status and so on. Also custoer's inforation like copany nae,website and logo can be added into Solar Eagle software. 10.RS232 and LAN counication port. IP and Gate address could be user define it satisfy global area.and counication protocol can be provided to help custoer anage all inforation. 11.The upper coputer software is displayed in 11 languages, it could show work status and set paraeters of the discharge. MPPT Connection 1 2 PC PC Solar Panel Battery Box Solar Panel USB to RS232 MPPT Solar Controller Inverter DC Output AC Output MPPT Solar Controller DC Output Battery Box Inverter AC Output Note : 1)Above is off-grid solar connection picture ; 2)There are any way for counication,details please check anul
Paraeters Model: I-P-SMART2-40A/50A/60A -series 40A 50A 60A Charge Mode Maxiu Power Point Tracking Method 3 stages: fast charge(mppt),constant voltage, floating charge Type DC Autoatic recognition Voltage Soft Start Tie Dynaic Response Recovery Tie Conversion Efficiency PV Modules Utilization Rate MPPT Working Voltage and Range Low Voltage Input Protection Point Low Voltage Input Recovery Point Max DC Voltage Input Overvoltage Protection Point Input Overvoltage Recovery Point 12V 24V 48V syste syste syste syste Input Characteristics 12V 24V 48V 12V 24V 48V 12V 24V 48V DC9V~DC15V DC18V~DC30V DC36V~DC60V 10S 500us 96.5%, 99% 99% DC18V~DC150V DC34~DC150V DC65~DC150V DC16V DC30V DC60V DC22V DC34V DC65V DC160V DC150 DC145V 12V 570W 700W 900W Max. PV Power 24V 1130W 1400W 1700W 48V 2270W 2800W 3400W
Output Characteristics Selectable Battery Types (Default type is GEL battery) Constant Voltage Floating Charge Voltage Over Charge Protection Voltage Rated Output Current Current-liiting Protection Sealedlead acid, vented, Gel, NiCd battery (Other types of the batteries also can be defined) Pleasecheck the charge voltage according to the battery type for. 12V 14.6V 24V 29.2V 48V 58.4V 40A 50A 60A 44A 55A 66A Rate charge current 40A 50A 60A Teperature Factor ±0.02%/ Teperature Copensation Output Ripples(peak) Output Voltage Stability Precision Charge voltage Peak-PeakRipple Charger voltage accuracy Control Max discharge current Discharge protection Double-tie control ON / OFF ode PV voltage control PV voltage / tie delay control Discharge voltage protection Discharge characteristic Controller or LAN 14.2V-(The highest teperature-25 )*0.3 200V ± 1.5% 200V ± 1.5% 40A fuse 30A*2 On in orning,off in orning / On in night,off in night ON / OFF PV voltage on,pv voltage off PV voltage on, tie delay off Output off when it under setting voltage; Factory set is 10.5.( Note : set based on 1 battery )
RS232 Counication LAN Counication Input Low Voltage Protection Input Overvoltage Protection Input Polarity Reversal Protection Output Overvoltage Protection Output Polarity Reversal Protection Short-circuit Protection Counication Protection We provide OEM and ODM service. The 36V/72V/96V odel also can be custo ade for you. Features Chose COM counication Set IP and Gate addressfor controller and solar eagle ;Then chose TCP counication Check the input characteristics Check the input characteristics yes Check the output characteristics yes Recover after eliinating the Short-circuit fault, no proble for long ter Short-circuit Teperature Protection 95 Above 85,decreasethe output power, decrease3a per Teperature protection degree. Noise Theral ethods Coponents Sell Environent Protection Other Paraeters 40dB Forced air cooling, fan speed rate regulated by teperature, when inner teperature is too low, fan ran slowly or stop; when controller stop working, fan also stop ran. World brand raw aterials. Copliance with EU standards.all rated teperature of electrolytic capacitors not less than 105 No peculiar sell and toxic substances. Meet the 2002/95/EC,no cadiu hydride and fluoride Physical Measureent DxWxH () 270*185*90 N.G(kg) 3 G.N(kg) 3.6 Color Safety EMC Type of Mechanical Protection Huidity Environent Blue/Green (optional) CE, RoHS, PSE,FCC EN61000 IP21 0~90%RH ( no condense) Altitude 0~3000 Operating Teperature -20 ~ +40 Storage Teperature -40 ~ +75 Atospheric Pressure 70~106kPa
Paraeters NO. Quantity Description Charge controller 1 2 3 4 5 6 7 8 1unit 4set Charge controller Terinals Gallow pulley(for install the controller on the wall ) Screw(all the controller on the wall) 232 turn to RJ45 counication cable User anual Teperature sensing wire Fuse wire The Main of MPPT Upper Coperter Software and Test Software 1.Work Status 2. 3. Chg Cur:8.4A Bat Type Sel Bat Type Sel BAT Type:Sealed MPPT CHARGER CC Mode Charging 23/09/13 10:37 Bulk Volt Set Float Volt Set Bulk Volt Set Bulk Volt:14.2V Float Volt Set Float Volt:13.8V 30A 48V BAT CHG SYS The interface of upper coputer software working state Bat Tep:28C Max Chg Cur Set Max Cur Set Max Cur Set:30A Total:237.6WH Buck Tep:34C Date Set Date Set 23/09/13 10:37 Firware Ver:2.0 PV Volt:104.8V Tie Set Tie Set 10:37:56 BAT Type:Gel Chg Power:508W Gate address Set Gate Set 192.168.1.1 IP:192.168.1.8 Bat Volt:50.1V Port Set TCP Port Set Port:8888 Port:8888 The interface of upper coputer software paraeter setting state IP address Set IP Set 192.168.1.8 Tier Load Ctrl Morning Load On Morning Load On Tie:05:00 Morning Load Off Night Load On Morning Load Off Tie:07:00 Night Load On Tie:18:00 Night Load Off Night Load Off Tie:23:00 Upper coputer software on/off interface and generating capacity record clean interface Load off Bat Volt Load off Bat Volt Bat Volt:10:5V ON/OFF Mode Load ON/OFF Mode Load On Load On Volt Load Off Volt Load On Volt Set PV Volt:15.0V Load OFF Volt Set PV Volt:30.0V PV&Tie Ctrl PV&Tie Ctrl Load On Volt PV&Tie Ctrl Load Delay Tie Load On Volt Set PV Volt:15.0V Load Delay Tie Delay:12H 1) All above inforation is a saple which is the working state of MPPT in soetie. In different working stage the paraeters will change like work ode,charge current,charge ode,charge power and so on ; In the fault ode it will show fault ode ; 2) If all above dates show eans this could change ;the details please check the anul The interface of test software working state 1)Attachent have upper coputer software, suitable for all coputer. 2) Trafficker will provide neutral upper coputer software and CD, or software with custoer's logo. 3) WIN7, WIN8 user, please log in as adinistrator : More details please check the anul.