STAINLESS STEEL Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers. With an extensive inventory of over 80,000 off-the-shelf items, Scope operates as a one-stop shop on a just-in-time, 24-hour delivery basis to domestic customers. Scope supplies stainless steel, aluminum, steel, and alloy steel, brass, copper, bronze, titanium, nickel alloys, and engineered plastics products. In addition to exporting from the Eastern Mediterranean, Scope Metals Group operates in Eastern & Central Europe, China and on the East Coast of the United States. All our products are according to international standards. Quality control is coordinated by an in-house, ISO 9001:2000 certified controller. Scope s leading position is supported by state-of-the-art automatic and computerized warehouses and processing equipment: Advanced cut-to-length and blanking lines Slitting line Brushing, polishing and PVC coating line Band saws (1000 mm DIA) Band saws for plates up to 800 mm thickness, size 2000 mm x 6000 mm
ST. ST. FLAT PRODUCTS (THICKNESS) SIZE (DIMENSIONS = WIDTH and/or LENGTH) 301, 302,304L, 309, 310, 316L, 316TI, 321, 409 410, 420, 430, 3CR12, 17-4-PH, 17-7-PH, 15-5-PH, C-276, Alloy 600, 904L, Duplex 2205 COILS SHEETS 0.25 mm 5 mm Up to 2000 mm (width) or cut to your required lengths 303, 304L, 309, 310, 316L, 316TI, 321, 3CR12, 17-4-PH, 15-5-PH, C-276, Alloy 600, 904L, Duplex 2205 PLATES 6 mm 150 mm Various Sizes or cut to your required lengths ST. ST. LONG PRODUCTS (THICKNESS) SIZE (DIMENSIONS = WIDTH and/or LENGTH) 303, 304, 304L, 304 (IMP), 316L, 316(IMP), 316TI, 321, 410, 416, 420, 430, 430F, 431, 440C, 13-8- mo, 15-5-PH, 17-4-PH, C-276, Alloy 20, Monel 400, Alloy 600, Incoloy 800h, 904L, Duplex 2205 303, 304, 316L, 440C, 13-8-mo, 15-5-PH, 17-4-PH ROUND BARS SQUARE BARS 2 mm 500 mm DIA Cut to your required lengths 2 mm 100 mm Cut to your required lengths HEXAGON BARS 303, 304, 316L, 321, 17-4-PH 2 mm 80 mm Cut to your required lengths 303, 304, 310, 316L, 316TI, 15-5-PH, 17-4-PH FLAT BARS ANGLES (HRAP) 2 mm 100 mm Up to 400 mm (Width) 304, 316L 25X25X3 mm 100X100X10 mm U,T,I SECTIONS 304, 316L 35 mm 240 mm ST. ST. WIRES 304, 316L (Annealed) WIRES 0.5 mm 5 mm (DIA) ST. ST. MESH WIRES 304, 316 MESH WIRES 1000 mm - 1300 mm (Width) 0.47 mesh - 325 mesh
ST. ST. TUBULAR PRODUCTS (DIA) 304L, 316L, 321, 310S, 904L, 254SMO, Duplex 2205, C-276 PIPES (SEAMLESS / WELDED) 1/8" 20" SCH 5, 10, 40, 80, 160 304L, 316L, 321 TUBES (SEAMLESS / WELDED) 1/8" 16" 4 mm - 500 mm 304L, 316L PRESS TUBES (WELDED) 12 mm 108 mm 304L, 316L HOLLOW BARS OD 32 mm 250 mm (DIA) 304, 316L ORNAMENTAL POLISHED TUBES 1/2 4 6 mm 150 mm 304, 316L SQUARE & RECTANGULAR POLISHED TUBES 10 mm 250 mm 316L TUBES (SEAMLESS / WELDED) for microelectronics, pharmaceuticals and CFOS 1/4" 6" ST. ST. FITTINGS PRODUCT GRADES AVAILABLE DIMENSIONS RANGE Ball valves - Full Range (Threaded, Flanged, SW, BW, FS) 316 1/4" 10" Gate and globe valves - Full Range 316 1/2" 10" Strainer and check valves - Full Range 316 1/4" 8" Flanges - Full Range (socket weld, slip on, blind, weld neck, threaded) Forged fittings 3000 LBS - Full Range (Threaded and SW) 304L, 316L 1/2" 24" 304L, 316L 1/4" 3" Cast fittings 150LBS - Full Range (Threaded) 304, 316 1/8" 4" BW fittings for pipes - Full Range (SCH 10S, 40S, 80S) 304L, 316L, C-276 1/4" 20"
ST. ST. FITTINGS (CONTINUED) PRODUCT GRADES AVAILABLE DIMENSIONS RANGE Fittings for food and dairy (SMS, RJT, DIN, 3A.) Including ball valves, single valves, butterfly valves and pumps. 304L, 316L 1/2" 8" nw10-nw150 Press fittings 316 15 mm 108 mm Fittings, valves, and pumps for pharmaceutical Fitting for microelectronics industry (orbital welding) 7-10RA 316L 1/2" 4" 316L 1/4" 1.1/2" Tube fittings (Twin Ferrule) 316L 1/8" 1" ST. ST. FASTENERS Machine screws Threaded rods A2, A4 304, 316 Socket head screws Sheet metal screws Wood screws Wedge anchors Washers U Bolts Blind rivets Clamps Pins Rings M2 - M30 #2-1.1/2 All fastener are according to DIN/ANSI standards Spring washers Nuts ST. ST. WELDING CONSUMABLES PRODUCT SPECIFICATIONS (AWS) SIZE TIG wires ER308L, ER309L, ER310, ER312, ER316L, ER347 1.2 mm 3.2 mm MIG wires E307(EN12072G188Mn), ER308Lsi, ER309Lsi, ER309LMO, ER310, ER316si 0.8 mm 1.6 mm Flux cored wires (MAG) Covered arc welding electrodes TIG nickel alloys E308LT-1/-4, E309LT1-1/-4, E309LMoT1-1/-4, E312T1-1/-4, E316LT-1/-4, E316LT-0-1/-4, E2209T1-1/-4, E347T1-1 E307-15, E308L-16, E308Mo-16, E309L, E309Mo-16, E310-16, E312-16, E316L- 16, E317-16, E347-16, E320-15 ERNiCrMo-4, ERNiCr-3, ERNiCrMo-10, ERNiCrMo-3, ER630, ER385, ER2209, ER2507 / Zeron 100 ST. ST. GRATINGS 1.2 mm 1.6 mm 2 mm 5 mm 1.2 mm 3.2 mm BEARER BAR TRANSVERSE BAR (DIA) 304, 316 Galvenized / No paint GRIPWELD A60, A100 1000 x 2000 mm 1000 x 3000 mm 30 x 3 mm 30 x 4 mm 30 x 4.5 mm 7 mm 304, 316 Galvenized / No paint RECTAGRID RS80 1000 x 2000 mm 1000 x 3000 mm 25 x 4.5 mm 30 x 3 mm 8 mm * Information and images contained in this catalog are intended for informational purposes only. It is the responsibility of the customer to verify the suitability of any product to its intended use. SCOPE is under no obligation to deliver or stock any of the items described herein. Product information is subject to change without notice.
SCOPE METALS GROUP MAIN OFFICE & WAREHOUSES - ISRAEL TEL. 972-8-8631000 FAX. 972-8-8631020 export@scope.co.il WWW.SCOPE-METALS.COM USA: EUROPE: THE FAR EAST: HADCO METAL TRADING - NY Tel: 800-221-0344 Fax: 718-291-8388 salesny@hadco-metal.com HADCO METAL TRADING - FL Tampa Bay Tel: 813-258-4499 Fax: 727-572-9565 salesfl@hadco-metal.com PRIMAPOL METAL SPOT Czech Republic Tel: 420-315-817-111 Fax: 420-315-817-130 office@pmspot.cz WWW.PRIMAPOL.CZ DALIAN BEST METALS China Tel: 86-411-87187155/255 Fax: 86-411-87187055 sales@db-metal.com HADCO METAL TRADING - PA Tel: 800-638-2521 Fax: 215-695-2706 salespa@hadco-metal.com HADCO METAL TRADING - FL Pompano beach Tel: 800-537-9953 Fax: 954-960-0451 salesfl@hadco-metal.com PRIMASPOT POLSKA Poland Tel: 48-32-76-51-600 Fax: 48-32-76-51-601 office@primaspot.pl WWW.PRIMASPOT.PL MATERIALS TECHNOLOGY SOLUTIONS - NJ Tel: 973-401-0711 Fax: 973-401-1325 sales@materialtech.com WWW.MATERIALTECH.COM PRIMASPOT DEUTSCHLAND Germany Tel: 49-89-208039-334 Fax: 49-89-208039-335 office@primaspot.de WWW.PRIMASPOT.DE GILINOX Romania Tel: 40-31-224-0800 Fax: 40-31-224-0804 info@gilinox.ro WWW.GILINOX.RO