Uniclass. Alumasc L7313:P421. CI/SfB. (52.3) Ih1 January Harmer SML. Socketless Soil and Waste Systems

Unicss Aumsc L7313:P421 CI/SfB (52.3) Ih1 Jnury 2009 Hrmer SML Socketess Soi n Wste Systems

Mintining Fow of Informtion The ringe wesite of Aumsc Exterior Buiing Proucts Lt (Aumsc) is esigne to provie comprehensive prouct n technic informtion for rchitects, specifiers n contrctors. The site provies weth of informtion on spects of the Hrmer SML soi n wste system, ong with fu etis on other comptie ringe proucts from the Hrmer rnge. Key Fetures Technic Support Aumsc ringe proucts re cke up y comprehensive technic iterture n y hns-on project support strting with technic n esign vice, n extening through site insttion to recommention of pproprite mintennce regimes. Impementtion is e y the Aumsc Dringe Mnger ppointe to the project. www.umscringe.co.uk Unique NBS Specifiction Seector NBS specifictions cn e crete, ownoe n sve. Users re guie through series of options, resuting in tior-me specifiction ocuments suite to iniviu project requirements. CAD Detis Over 1000 CAD etis re vie in DWG n PDF fie formts. A rwings hve preview grphic, owing rpi owno of the correct CAD fie. Downos You cn owno fu technic iterture, ong with prouct n COSHH tsheets. 2

Contents Introuction The Hrmer SML System 4 An Integrte Dringe Soution 5 The Aumsc Prtnership 6 Quity n Sustiniity 7 Benefits of the Hrmer SML System 8 Benefits of Moern Cst Iron 9 Project Gery 10 Hrmer SML Prouct Rnge Summry 12 The Hrmer SML Prouct Rnge 14 SML Prouct Tes Pipes n Pipe Fittings 15 Pipe Fittings 16 Pipe Coupings n Aptors 26 Fixing Toos 29 Pipe Brckets 30 SML Technic Dt Pipes n Pipe Fittings 32 Coupings 34 Brckets 36 SML Insttion Ductie Iron Couping 38 Stiness Stee Couping 39 Vertic Pipe Support 40 Horizont Pipe Support 42 Acoustic Protection 43 Connection to Other Mteris 44 Mnifo Connection 46 Other Connections 47 Fixing Toos 48 Guieine to NBS Specifiction 49 Hrmer Roof Outets, Foor Drins n Shower Drins Hrmer Dringe Outets n Aptors 50 Hrmer Roof Outets 51 Hrmer Foor Drins 54 Hrmer Pipe Aptors 57 Hrmer Shower Drins 58 Other Proucts Unergroun Dringe System 60 Other Hrmer Dringe Proucts 61 Aumsc Premium Proucts 62 Proven Project Trck Recor 63 Aumsc Technic Hepine +44 (0) 1744 648400 3

The Hrmer SML System The Hrmer SML ightweight cst iron pipework system is ry-jointe, Agrément certifie, n hs proven trck recor for ove-groun ringe. With its comprehensive rnge of fittings n ccessories, SML is the ie soi n wste system which cn so e use for rinwter insttions. A-Roun Fexiiity The Hrmer SML system consists of cote, socketess cst iron pipes n fittings simpy joine with either uctie iron or stiness stee ruer-ine coupings. The rnge so incues rcketry for restrining the pipework verticy n supporting it horizonty, ong with choice of speci connectors for inking with other mteris. Hrmer SML provies vue for money throughout the uiing ife cyce, incorporting high performnce mteris, ese of insttion n ese of ccess for mintennce. Consequenty, the SML system continues to e successfuy use in mrket sectors rnging from hospits, hethcre premises, commerci premises, offices, schoos, inustri projects to civi engineering works n housing. A-Roun Stnrs Hrmer SML fuy conforms to BS EN 877, the Europen stnr for cst iron pipes n fittings. In ition, Hrmer SML hs een wre British Bor of Agrément certificte for coupings, pipes n fittings. A correcty inste Hrmer SML system wi meet the performnce stnrs set y BS EN 12056, the coe of prctice for grvity ringe systems tht covers snitry pipework n roof ringe insie uiings. Consequenty, the SML ringe pipe system is eminenty suite for ringe ppictions require within uiings in the UK. SML is so officiy pprove for use in numerous other countries incuing Austri, the Czech Repuic, Denmrk, Finn, Germny, Hungry, Norwy, Russi, Singpore, Sween, Switzern n the Ukrine. Key Fetures of Hrmer SML A proven, Agrément certifie system which meets the Europen stnr BS EN 877. Exceent coustic performnce teste in ccornce with BS EN 14366: 2004. Non-comustie. High tensie strength. Choice of uctie or stiness stee coupings. Secure socketess fixing etween pipe n fitting. Low mintennce. 100% recyce. Certificte No.05/4191 Quick to sseme. 4 www.umscringe.co.uk

An Integrte Dringe Soution Hrmer SML is fuy comptie with Aumsc s rnges of uminium Roof Outets, Foor n Shower Drins, ening fexie esign soutions to e foun for soi, wste n rinwter ringe configurtions. Hrmer SML is so supporte y Aumsc s wie-rnging technic expertise n resources. Hrmer AV Roof Outets The Comptie Rnges Hrmer AV Roof Outets re high performnce outets with circur fnges, suite for regur ft roofing ppictions with continuous memrnes. They re vie with spigot or screw connection, for vertic, horizont or 45 egree ischrge. (See pges 50, 51 n 53) Hrmer Deti Roof Outets re for ppictions such s conies n cr prks, with two-wy outets vie for use where the roof surfce uts w or prpet. (See pges 50, 51 to 53) Hrmer Foor Drins comprise rin oies in power cote uminium, together with n extensive rnge of grtes (incuing roun n squre configurtions) vie in stiness stee or nicke ronze. The rnge is suite to virtuy ny interior ringe ppiction n types of fooring. The rin oies re vie either trppe or untrppe, with vertic or horizont spigot connection, n with or without sie outets for connection to sink, th, shower wstes, etc. (See pges 50, 54 to 56) Hrmer Deti Roof Outets Hrmer Shower Drins re high performnce outets for concrete or timer foors in oth refurishment n newui projects. They cn e coour coorinte n use with fexie sheet or tie foor finishes. (See pges 50, 58 n 59) Technic Support n Resources Technic Support Comprehensive t for specifiction n use of proucts n systems is vie in puishe form, n on the compny wesite. This is cke up y pro-ctive support on project sis, e y speciist re mngers n using the test CAD technoogy incuing Architectur Desktop n Autoc. Hrmer Foor Drins Aumsc Resources An enthusistic n committe workforce cke up y profession mngement n ses tems. Stte-of-the-rt n quity ccreite prouction fciities for uminium n rener proucts, with fctory finishing cpiity for the former. A crefuy eveope n nurture suppy chin for wor css proucts to compement the in-house mnufcture n to ensure fuy roune n comprehensive offer for ringe n exterior systems. A strong reserch n eveopment cpiity. Technic support for esign n costing, se on the test CAD technoogy n comprehensive rnge of technic iterture. Hrmer Shower Drins Aumsc Technic Hepine +44 (0) 1744 648400 5

The Aumsc Prtnership Aumsc is the UK speciist in ightweight cst iron soi n wste systems, which form prt of the compny s renowne Hrmer rnge. The Prtnership Aumsc hs ong-stning prtnership with Düker GmH who mnufcture Hrmer SML t their pnt in Krstt, Germny. Since their form (GmH) estishment in 1913, Düker hs strive to incorporte the enefici chrcteristics of cst iron within its ringe proucts. In 1967, Düker revoutionise the cst iron ringe mrket y eveoping the spigot-ony (i.e. socketess) jointing technique for ringe pipes, setting new enchmrk for reiiity, quity n spee of insttion. The Düker founry utiises stte-of-the-rt equipment n mchinery in its prouction processes, with continuous investment in prouct eveopment n technoogy. Aumsc n Düker re committe to proviing high quity soi n wste system tht meets the requirements of BS EN 877, the Europen stnr for cst iron pipes n fittings. Krstt Pnt, Germny Centrifug csting process 6 www.umscringe.co.uk

Quity n Sustiniity The fu spectrum of ssessment proceures n quity contro stnrs hve een empoye y Aumsc to monitor the mnufcture n performnce of its cst iron proucts n systems, ensuring responsie enggement with customers n the environment. Hrmer SML Prouct Testing n Certifiction British Bor of Agrément Certificte No. 05/4191: For coupings, pipes n fittings. SML so compies with numerous other certifie stnrs. Certificte No.05/4191 Stnrs Specific to the Düker Compny DIN 19522: Germn Stnr for ringe systems in cst iron. BS EN 877: Europen Stnr for cst iron pipes n fittings. This stnr sets requirements for mteris, imensions n toernces, mechnic properties n stnr cotings for pipes, fittings n ssocite ccessories. ISO 6594: Interntion Stnr for socketess ringe systems in cst iron. BS EN 681/ISO 4633: Specifiction for Estomeric Ses for Joints in Pipework n Pipeines. RAL-GZ 698: Quity Systems Certificte for cst iron ringe pipe systems. MPA Dortmun 11 000 1436/01/01: Conformity to EN 877. CSI 1094RF: Fire Resistnce Test Report. BS EN 14366: 2004, Lortory mesurement of noise from wste wter insttions. Hrmer SML test certificte P-BA 164/2008e n P-BA 165/2008e. EN 13501-1: Fire cssifiction of construction proucts n uiing eements. Hrmer SML hs n A1 fire cssifiction. Test report KB-Hoch-080195. BS EN 1561: Founing. Grey Cst Irons. Quity Assurnce BS EN ISO 9001: 2000, Registere No. 12 100 21864 This is quity ssurnce scheme monitore y BSI s inspectorte tht mkes regur checks to ensure stnrs re mintine. IZEG n GEG: IZEG is resource centre for isseminting etie informtion on the quity n performnce of cst iron ringe proucts. The GEG quity se is wre to proucts tht meet stringent quity regutions fter rigorous testing unertken y inepenent institutes. Aumsc Environment Poicy In ition to compying with environment egistion, Aumsc is committe to eveoping its own mesures to imit the verse effects of its ctivities on the environment. To this en, Aumsc opertes n environment poicy cross sites tht fuy integrtes spects of compny ctivities. The Aumsc environment poicy sets the stnrs for site emissions, noise eves, virtions, n so systemticy ssesses the introuction of new processes n proceures. Coes of Prctice BS EN 12056-2: Coe of Prctice for grvity ringe systems insie uiings snitry pipework. BS EN 12056-3: Coe of Prctice for grvity ringe systems insie uiings ringe of roofs. BS EN 752: 1996, Coe of Prctice for rin n sewer systems outsie uiings. Environment Protection BS EN ISO 14001: 2004, Mnufcturing to Environment Stnrs. Grey cst iron is 100% recyce. Pipe cuttings cn so e incue in recycing ecuse the intern coting is free from enzopyrene n other environmenty ngerous mteris. Aumsc Technic Hepine +44 (0) 1744 648400 7

Benefits of the Hrmer SML System Hrmer SML, proven, Agrément certifie system which meets the Europen Stnr BS EN 877, offers wie rnge of enefits. Fire Sfe Non-comustie, therefore oes not require costy fire protection cors. When teste y the MPA North-Rhine Westphi Lortory in Germny, SML cst iron prove superior compre to other ringe mteris. Hrmer SML hs the highest fire cssifiction A1 teste in ccornce with the requirements of EN 13501-1. Roust Lightweight, strong n ure. High tensie strength. Toty secure socketess fixing etween pipe n fittings. Fit for Purpose High resistnce to positive n negtive pressure xi restrint up to 10 r possie, therefore no nee to chnge mteri in sensitive res. No expnsion joints, efection ens or other speci expnsion contro techniques re require for the imensiony ste pipes ue to the ow coefficient of therm expnsion of cst iron. Quiet Exceent coustic performnce, Hrmer SML hs een teste in ccornce with BS EN 14366: 2004 the test test for coustic performnce of uiing mteris. Typicy, no speci soun insution mesures require. Esy n Quick to Inst Asseme y mens of twin screw coupings. Esiy connects to other mteris vi push-fit coupings. No speci insttion equipment require. No speciist experience require. Low Mintennce Epoxy cotings ensure pipes n fittings nee minim mintennce over ifetime of ringe insttion. Inherent resistnce to extern ccient mge n vnism. Stiness Stee Couping Vue for Money Less fixing necessry, s fewer rckets re require ecuse of greter pipe spnning cpiity. Cst iron hs proven trck recor for its ongevity over the ifetime of uiing. Sustine Long ife cyce. 100% recyce mteri therefore wste cn e returne to the furnce to mke new cst iron proucts. Ductie Iron Couping 8 www.umscringe.co.uk

Benefits of Moern Cst Iron For centuries, cst iron hs een preferre mteri for uiing construction, ecuse of its ongevity in wie rnge of ppictions. Avnces in cst iron technoogy hve ensure tht toy s proucts re fuy ttune to moern construction nees. 21st Century Technoogy Cst iron s high cron content (2%-4%) mkes it very suite for csting pipes n other cyinric components y pouring moten iron into permnent mous which re spun t high spee. The iqui is force to the sies of the mou ining proucing csting tht hs uniform w thickness. As resut of this centrifug force, the iron ecomes enser n stronger thn grvity cst iron, mking it prticury we suite to ringe ppictions, where pipes cn e me in onger engths. Temperture Extremes n Liner Expnsion Fire Performnce Cst iron is non-comustie n therefore oes not propgte fire nor emit toxic gses, unike psticsse systems. Consequenty, inste cst iron components o not require costy fire protection mesures. Cst iron s ow coefficient of therm expnsion (0.0105 mm/m/k) mens tht components me from it cn e sujecte to extreme tempertures without istortion, therey requiring no costy expnsion joint provision to tke up ifferenti movement. This is prticury enefici where cst iron components re use in conjunction with concrete structures (concrete hs n most ienticy ow coefficient of therm expnsion). Acoustic Performnce The crystine nture of cst iron gives the mteri very high mping cpcity therey significnty reucing noise trnsmission through cst components inste within uiing structures. Hrmer SML hs een teste for its coustic performnce in ccornce with BS EN 14366: 2004. High Strength The crystine structure of cst iron so gives the mteri high strength n roustness. Once inste, cst iron components resist impct mge even in expose res, such s shopping centres, crprks n schoos. Pipes cn spn onger istnces n so ess fixing ck to supporting structures cn e empoye. Duriity Inherent corrosion resistnce coupe with tough epoxy cotings ensures tht cst iron components wi nee minim mintennce uring the ifetime of ringe insttion. The ure nture of cst iron components is thus ie when use in inccessie or ifficut to rech res. Environment Consiertions Me with most 100% recyce scrp mets, cst iron cn e recyce inefinitey, n therefore shou not e ispose of in nfi. Aumsc Technic Hepine +44 (0) 1744 648400 9

Project Gery The Hrmer SML ightweight cst iron pipework system, n its comprehensive rnge of fittings n ccessories, is the ie soi n wste system for specifiction cross spectrum of construction types, incuing reti, commerci, civi, trnsport, sport, n heth projects where it cn so e use for rinwter insttions. Dery Super Hospit Miennium Stium Norfok n Norwich University Hospit Wsgrve Hospit Project Listing Norfok n Norwich University Hospit, Norfok Wsgrve Hospit, Coventry Dery Super Hospit, Dery 10 www.umscringe.co.uk

Project Gery West Ini Quy Photo courtesy of Formtion Architects Lt Hiton Hote Miennium No.1 O Bro Stium, Street Criff Miennium Stium, Criff No.1 O Bro Street, Lonon West Ini Quy, Lonon Hiton Hote, Criff Aumsc Technic Hepine +44 (0) 1744 648400 11

Hrmer SML Prouct Rnge Summry A Hrmer SML pipes n fittings compy with BS EN 877, eing mnufcture in Germny uner strict fctory-controe conitions to meet the highest performnce stnrs. They re ure, recyce, quick n esy to inst n require ow mintennce. Pipes Hrmer SML pipes re vie in stnr 3m engths, in imeters of 50mm to 400mm, proviing everything for high performnce, ightweight cst iron soi n wste systems. (See pge 15) Pipes hve n exterior primer coting, minimum thickness 40 µm. The interior of pipes hs n epoxy coting with minimum thickness of 120 µm. Fittings Hrmer MLK The Hrmer MLK unergroun ringe system hs n ientic mteri specifiction to Hrmer SML ut with ition coting specifiction to cope with ggressive groun conitions n wste wter ppictions. Hrmer MLK n Hrmer SML re fuy comptie. (See pge 60) Hrmer SML fittings shown opposite re cote externy n interny with n epoxy coting, minimum thickness 60 µm. 12 www.umscringe.co.uk

Hrmer SML Prouct Rnge Summry Bens n Offsets A wie rnge of ens to ccommote chnge of irection, meeting wie vriety of esign requirements, incuing singe ens, short n ong ti oue ens, ong rius ens, ens with spigots, rest ens n offsets. (See pges 15 17)fi Brnches Fittings esigne to ccommote connection of rnch pipework to princip vertic pipe stck. The vie rnge incues singe n oue rnches, swept entry rnches, corner rnches n comintion rnches. (See pges 18 20) Brcketry Mintining the stiity of ove-groun pipework is vit, n to this en Aumsc hs eveope rnge of support rcketry tht supports oth verticy n horizonty. The rnge incues vertic, horizont, hnging n stck support rckets, which re vie zinc pte or pre-gvnise, n fitte with souneening ruer inings. (See pges 30 31)fi Access Fittings Designe to ow ccess for inspection n roing incues circur ccess pipes, rectngur ccess pipes, ccess ens n rnches. (See pges 21 22) Coupings n Aptors Hrmer SML coupings re speciy esigne for joining engths of Hrmer SML pipe, n for joints etween pipes n fittings. Coupings re vie in stiness stee n uctie iron. Like Hrmer SML pipes n fittings, Hrmer SML coupings hve een suject to rigorous testing n meet the requirements of BS EN 877. (See pges 26 28) Competing the Prouct Rnge The rnge so incues oss pipes, reucers, en cps, ownpipe supports, ering rings, mnifo, connectors, fnge pipes n trps. (See pges 22 25) Aumsc Technic Hepine +44 (0) 1744 648400 13

The Hrmer SML Prouct Rnge The compete rnge of Hrmer SML pipes, pipe fittings, pipe coupings n pipe rckets wi e foun in the foowing ist of prouct tes. Pipes A imeters in 3000mm engths 15 Pipe Fittings (Bens n Offsets) Singe Bens 15º 15 Singe Bens 30º 15 Singe Bens 45º 15 Singe Bens 68º 16 Singe Bens 88º 16 Short Doue Bens 88º 16 Long Doue Bens 88º 16 Long n Meium Rius Bens 88º 16 Bens with Long Tis 45º 17 Bens with Long Tis 88º 17 Bens with Long Tis 135º 17 Offsets 17 Rest Ben 17 Pipe Fittings (Brnches) Singe Brnches 45º 18 Singe Brnches 68º 18 Singe Brnches 88º 19 Doue Brnches 45º 19 Doue Brnches 68º 19 Doue Brnches 88º 19 Swept Doue Brnches 88º 20 Corner Brnches 88º 20 Comintion Brnches 20 Pipe Fittings (Access) Roun Access Pipes 21 Rectngur Access Pipes 21 Long n Short Access Bens 88º 21 Swept Entry Brnches 88º 22 Pipe Fittings (Misceneous) Boss Pipes 88º 22 Reucers 22 En Cps Bnk Ens 23 En Cps Tppe 23 En Cps Pug 23 Downpipe Supports 23 Bering Rings 23 Mnifo Connector 24 Seeve Connectors 24 Stonewre Connectors 24 Fnge Connectors 24 Pipe with W Fnge 25 Brnch Trps 25 Pin Trp 25 Rinwter Stench Trps 25 Pipe Coupings n Aptors Ductie Iron 26 Duo 26 Grip 26 Aptor 27 Connect-G Inox High Pressure 27 A Ring Ruer 27 O Ring Ruer 27 Konfix Singe (Wste ptor) 28 Konfix Muti (Wste ptor) 28 Ruer Pipe Joints 28 Pipe Brckets Optim 30 Optim HD 30 Hnging 30 Acoustic Dmpener (B Fix) 30 W Pte n Three Ro 31 Stck Pipe Support 31 Stn Pipe Support 31 14 www.umscringe.co.uk

Pipes n Pipe Fittings Pipes i Pipe Di Pipe OD Nom Weight Prouct (mm) (kg) Coe 50 58 3000 13.0 660004 70 78 3000 17.7 660094 100 110 3000 25.2 660184 125 135 3000 35.4 660274 150 160 3000 42.2 660364 200 210 3000 69.3 660454 250 274 3000 99.8 660654 300 326 3000 129.7 660664 400 429 3000 180.0 660604 400mm i pipe is vie on request Singe Bens 15º Pipe Di x Nom Weight Prouct (mm) (kg) Coe x x 15º 50 40 0.4 661004 70 45 0.6 661064 100 50 1.0 661124 125 60 1.7 661184 150 65 2.5 661244 200 80 4.6 661304 Singe Bens 30º Pipe Di x Nom Weight Prouct (mm) (kg) Coe x x 30º 50 45 0.5 661014 70 50 0.7 661074 100 60 1.3 661134 125 70 2.0 661194 150 80 3.0 661254 200 95 5.4 661314 250 110 9.7 661364 300 130 15.5 661384 Singe Bens 45º Pipe Di x Nom Weight Prouct (mm) (kg) Coe 50 50 0.5 661024 x x 45º 70 60 0.9 661084 100 70 1.6 661144 125 80 2.3 661204 150 90 3.5 661264 200 110 6.2 661324 250 130 10.3 661374 300 155 17.5 661394 400 257 36.0 661284 400mm i singe en is vie on request Aumsc Technic Hepine +44 (0) 1744 648400 15

Pipe Fittings Singe Bens 68º Pipe Di x Nom Weight Prouct (mm) (kg) Coe x x 68º 50 65 0.7 661034 70 75 1.1 661094 100 90 1.9 661154 125 105 2.9 661214 150 120 4.3 661274 200 145 7.7 661334 Singe Bens 88º Pipe Di x Nom Weight Prouct (mm) (kg) Coe 50 75 0.7 661054 x x 88º 70 90 1.2 661114 100 110 2.1 661174 125 125 3.2 661234 150 145 4.9 661294 200 175 8.1 662784 250 225 13.8 233621 300 260 28.0 233622 Short Doue Bens 88º x 44º x 44º Pipe Di x Nom Weight Prouct (mm) (kg) Coe 50 50 121 100 1.2 661484 70 60 145 120 1.8 661494 100 70 170 140 3.2 661504 125 80 195 160 4.6 661514 150 90 219 180 7.0 661524 Long Doue Bens 88º x 44º Pipe Di x Nom Weight Prouct (mm) (kg) Coe 70 60 273 300 3.2 662734 100 70 291 312 4.8 662744 125 80 308 321 6.8 662754 150 90 325 333 9.6 662764 x 44º Long n Meium Rius Bens 88º x2 Pipe Di x1 x2 Nom Weight Prouct (mm) (kg) Coe 100* 255 55 255 55 5.5 235125L 150** 250 80 250 80 8.5 235126L * Long rius en **Meium rius en x1 16 www.umscringe.co.uk

Pipe Fittings Bens with Long Tis 45º k 45º Pipe Di Angeº x1 x2 k Nom Weight Prouct (mm) (kg) Coe 70 45 250 60 190 2.6 662054 100 45 250 70 180 4.2 662074 k = imension for mximum cut ck x1 x2 Bens with Long Tis 88º k x2 88º Pipe Di Angeº x1 x2 k Nom Weight Prouct (mm) (kg) Coe 70 88 250 90 160 2.8 662064 100 88 250 110 140 4.6 662084 k = imension for mximum cut ck x1 Ben with Long Tis 135º x2 135º x1 Pipe Di Angeº x1 x2 k Nom Weight Prouct (mm) (kg) Coe 100 135 312 150 100 5.0 662774 k = imension for mximum cut ck k Offsets x Pipe Di Offset x Nom Weight Prouct (mm) (kg) Coe 100 65 70 205 2.5 662864 100 130 70 270 3.4 662874 100 200 70 340 4.4 662884 Offset Rest Ben x1 Pipe Di x1 x2 Nom Weight Prouct (mm) (kg) Coe 100 260 55 251 56 5.7 100263 x2 Aumsc Technic Hepine +44 (0) 1744 648400 17

Pipe Fittings Singe Brnches 45º Pipe Di x1 x2 Nom Weight Prouct (mm) (kg) Coe 50 50 115 115 160 1.2 664004 70 50 130 130 170 1.6 663034 70 70 145 145 200 2.1 663064 100 50 150 150 180 2.3 663094 100 70 170 170 215 3.0 663124 100 100 190 190 260 3.8 663154 125 50 170 170 190 3.2 663184 125 70 185 185 225 4.0 663214 125 100 210 210 270 5.0 663244 125 125 230 230 305 6.1 663274 150 70 205 205 235 5.3 663334 150 100 225 225 280 6.5 663364 150 125 245 245 315 7.7 663394 x1 45º x2 150 150 265 265 355 9.2 663424 200 70 235 240 250 8.0 663484 200 100 260 260 300 9.8 663514 200 125 280 280 335 11.9 663544 200 150 300 300 375 13.3 663574 200 200 340 340 455 17.2 663604 250 100 305 305 320 15.4 663634 250 125 330 330 365 17.7 664504 250 150 350 350 405 20.2 664514 250 200 380 380 470 24.8 663644 250 250 430 430 560 31.5 663654 300 100 345 345 350 22.0 663664 300 125 360 360 375 23.9 664524 300 150 380 380 415 26.9 664534 300 200 415 440 485 34.0 664444 300 250 465 465 580 42.1 663674 300 300 505 505 660 50.1 663684 400* 300 555 565 660 60.0 663694 = connecting rnch i * 400mm i singe rnch is vie on request Singe Brnches 68º Pipe Di x1 x2 Nom Weight Prouct (mm) (kg) Coe 50 50 80 80 135 1.0 663014 70 50 90 90 140 1.3 663044 70 70 100 100 170 1.7 663074 x1 68º x2 100 50 110 100 155 1.9 663104 100 70 110 120 180 2.4 663134 100 100 130 120 180 2.9 663164 125 50 110 120 165 2.7 663194 125 70 120 130 190 3.2 663224 125 100 140 145 225 4.0 663254 150 100 150 155 235 5.2 663374 150 125 165 170 265 6.1 663404 150 150 180 180 295 7.1 663434 = connecting rnch i 18 www.umscringe.co.uk

Pipe Fittings Singe Brnches 88º Pipe Di x1 x2 Nom Weight Prouct (mm) (kg) Coe 50 50 66 80 145 0.9 663024 70 50 72 90 155 1.4 663054 70 70 83 95 180 1.7 663084 100 50 76 105 170 2.1 663114 x1 x2 88º 100 70 88 110 190 2.4 663144 100 100 105 115 220 2.9 663174* 125 50 82 120 180 3.0 663204 125 70 93 125 200 3.4 663234 125 100 110 130 235 4.0 663264 125 125 123 135 260 4.6 663294 150 50 100 140 200 4.4 663324 150 100 115 145 245 5.5 663384 150 125 128 150 275 8.2 663414 150 150 142 155 300 6.9 663444 Doue Brnches 45º = connecting rnch i * Prouct coe 663174 is vie with 250mm ong spigot. When this is require specify coe 664454 Pipe Di x1 x2 Nom Weight Prouct (mm) (kg) Coe 100 100 70 190 260 4.0 100260 45º 150 100 55 225 280 5.4 661444 = connecting rnch i x1 x2 Doue Brnches 68º Pipe Di x1 x2 Nom Weight Prouct (mm) (kg) Coe 100 100 85 130 215 3.6 663864 68º 125 100 85 145 225 4.6 663954 = connecting rnch i x1 x2 Doue Brnches 88º Pipe Di 2 x1 x2 x3 Nom Wt Prouct (mm) (kg) Coe x3 88º 2 100 50 50 94 94 105 170 2.2 663814 100 70 70 102 102 110 190 2.2 663844 100 100 100 115 115 115 220 3.2 663874 150 100 70 130 112 145 245 6.0 664184 150 100 100 130 112 145 245 6.1 664084 x1 x2 = connecting rnch i Aumsc Technic Hepine +44 (0) 1744 648400 19

Pipe Fittings Swept Doue Brnches 88º Pipe Di x1 x2 x3 Nom Wt Prouct (mm) (kg) Coe 100 100 170 170 150 270 4.5 100264 88º x1 x3 x2 Corner Brnches 88º Pipe Di x1 x2 Nom Weight Prouct (mm) (kg) Coe 100 70 102 110 190 2.7 662044 100 100 115 115 220 3.1 662034* 125 70 107 125 200 3.7 662024 125 100 125 130 235 4.4 662014 150 100 130 145 245 6.1 664434 Eevtion 88º Pn x1 90º x2 = connecting rnch i * Prouct coe 662034 is vie with 250mm ong spigot. When this is require specify coe 664464. Comintion Brnches Pipe Di 1 2 Nom Weight Prouct (mm) (kg) Coe 100 70 100 230 4.5 665834 100 100 100 230 5.0 665924 = connecting rnch i 90º Eevtion Pn 1 2 1 70 70/100 2 130 140 90º 20 www.umscringe.co.uk

Pipe Fittings Roun Access Pipes Pipe Di Access Nom Wt Prouct (mm) (kg) Coe 50 59 105 53 175 2.1 669580 70 69 125 73 205 2.9 669583 100 84 159 104 250 5.5 669586 Rectngur Access Pipes Pipe Di Access Nom Wt Prouct (mm) (kg) Coe 100 83 160 230 320 7.3 669624 125 101 190 255 355 10.0 669627 150 112 215 280 395 14.5 669630 200 137 262 330 465 22.0 669633 250 170 330 380 540 36.5 669612 300 195 380 430 610 51.0 669615 Long n Short Access Bens 88º Short r Pipe Di Type r Access Nom Weight Prouct (mm) (kg) Coe 100 Short 110 3.1 661174A 150 Short 145 6.1 232741 100 Long 230 150 6.0 661174AL Long Section (ong type shown) Aumsc Technic Hepine +44 (0) 1744 648400 21

Pipe Fittings Swept Entry Brnches 88º With n Without Access Pipe Di c Access Nom Wt Prouct (mm) (kg) Coe 100 168 102 150 100 270 3.7 663174S 100 168 102 150 100 270 4.7 663174SA 150 183 117 202 100 300 7.0 235684 No ccess r=50 c Boss Pipes 88º B (Bosse) CB (Corner Bosse) Pipe Di Boss c Nom Wt Prouct (mm) Type (kg) Coe 100 B 75 75 75 2 BSP 150 2.0 663114B 100 DB 75 75 75 2 BSP 150 2.3 663114DB 100 CB 75 75 75 2 BSP 150 2.3 663114CB 150 B 88 88 104 2 BSP 175 3.8 232746 150 DB 88 88 104 2 BSP 175 3.8 237738 DB (Doue Bosse) c c Reucers = connecting rnch i Pipe Di Nom Weight Prouct (mm) (kg) Coe 70 50 75 0.5 662504 100 50 80 0.9 662514 125 50 85 1.4 662534 150 50 95 2.0 662564 100 70 85 0.9 662524 125 70 90 1.5 662544 150 70 100 2.1 662574 125 100 95 1.5 662554 150 100 105 2.2 662584 200 100 115 4.1 662604 150 125 110 2.2 662594 200 125 120 4.1 662614 200 150 125 4.3 662624 250 150 135 6.8 662634 300 150 150 10.7 662494 250 200 145 7.0 662644 300 200 160 11.4 662714 300 250 170 12.4 662724 400* 300 180 15.0 662444 *400mm i pipe is vie on request 22 www.umscringe.co.uk

Pipe Fittings En Cps Bnk Ens Pipe Di Nom Weight Prouct (mm) (kg) Coe 50 30 0.2 665504 70 35 0.4 665514 100 40 0.5 665524 125 45 1.1 665534 150 50 1.7 665544 200 60 3.1 665554 250 70 6.0 665564 300 80 9.5 665574 En Cps Tppe Pipe Di Tp Di Nom Weight Prouct (mm) (mm) (kg) Coe 50 40 (1 1 /2 ) 30 0.2 665504TE 70 50 (2 ) 35 0.4 665514TE 100 50 (2 ) 40 0.9 665524TE 150 50 (2 ) 50 1.7 665544TE 200 50 (2 ) 60 3.1 665554TE En Cps Pug Pipe Di Nomin Weight Prouct (mm) (kg) Coe 100 1.1 664804 125 1.4 664814 150 2.1 664824 200 3.3 664834 Downpipe Supports Pipe Di x Nom Weight Prouct (mm) (kg) Coe 8 x 50 96 87 200 1.3 661544 70 96 106 200 1.6 661554 100 96 145 200 2.3 661564 125 96 170 200 3.0 661574 150 96 105 200 4.0 661584 200 96 245 200 6.0 661594 250 146 340 300 19.5 661604 300 146 390 300 25.5 661614 For use with Stck Pipe Support Brcket. (See pge 31 n 40 for etis) Bering Rings Pipe Di c Nom Weight Prouct (mm) (kg) Coe 50 61 193 25 33 0.8 666314 c 70 81.5 214 26 33 1.0 666324 100 115 250 28 33 1.3 666334 125 138 275 28 33 1.5 666344 150 163 301 30 33 2.0 666354 200 215 360 30 36 3.0 666374 250 280 442 34 40 5.6 227152 300 332 495 39 40 7.4 227153 Aumsc Technic Hepine +44 (0) 1744 648400 23

Pipe Fittings Mnifo Connector Pipe Di k Nom Weight Prouct (mm) (kg) Coe 100 287 240 66 42 1.8 214089 k 90º (See pge 46 for etis) Seeve Connectors m Pipe Di m Nom Weight Prouct (mm) (kg) Coe 100 144 250 40 3.3 662194 125 172 250 42.5 4.6 662204 150 201 250 45 6.1 662214 Stonewre Connectors m Pipe Di m Nom Weight Prouct (mm) (kg) Coe 100 159 140 70 4.3 664924 125 187 140 70 6.7 664934 150 218 140 70 7.5 664944 200 278 140 70 13.3 664954 For stonewre connection to Hrmer SML Pipes use the A ring couping. For connection from Hrmer SML to stonewre with feme en pipe use the O couping. (See pge 27) Fnge Connectors k Pipe Di k Nom Weight Prouct (mm) (kg) Coe 100 220 180 24 150 5.8 665934 125 250 210 26 150 8 665944 150 285 240 26 150 9.8 665954 200 340 295 26 150 14.5 665964 24 www.umscringe.co.uk

Pipe Fittings Pipe with W Fnge Pipe Di x1 x2 x3 x4 Nom Weight Prouct (mm) (kg) Coe 100 200 400 60 38 8.0 662224 x1 8 x2 60 38 Brnch Trps Pipe Di h w x1 x2 Nom Wt Prouct (mm) (kg) Coe h x1 x3 w 50 190 250 60 68 68 2.8 669562 70 265 293 60 93 93 5.5 669563 100 325 392 100 110 110 8.5 669564 125 390 446 100 130 130 13.0 669565 150 470 493 100 145 145 19.5 669566 200 600 500 100 130 210 33.0 669567 Pin Trp Pipe Di h x1 x3 Nom Weight Prouct (mm) (kg) Coe 100 370 297 80 55 7.3 100261 x3 x1 h Rinwter Stench Trps c 100 Pipe Di c Nom Weight Prouct (mm) (kg) Coe 70 195 90 80 472 9.0 669557 100 276 124 90 588 18.5 669558 125 344 144 100 687 28.5 669559 150 374 179 110 742 38.0 669560 c Vertic section Pn Aumsc Technic Hepine +44 (0) 1744 648400 25

Pipe Coupings n Aptors Ductie Iron Coupings h 2 1 Pipe Di h 1 2 Nom Weight Prouct (mm) (kg) Coe 50 79 111 50 68 0.6 235849 70 89 132 50 68 0.7 235526 100 134 168 60 78 1.1 235357 150 184 230 71 89 1.9 235358 200 231 278 82 100 3.5 235527 Suppie with integr eectric continuity screws. Duo Coupings h Pipe Di Bots h Prouct (mm) Coe 50 2 75 90 55 3140/50 70 2 95 110 55 3140/70 100 2 125 140 55 3140/100 125 2 125 165 70 3140/125 150 2 175 190 70 3140/150 200 4 220 255 70 3140/200 250 8 280 315 140 3140/250 300 8 335 370 140 3140/300 Suppie s stnr with eectric continuity spur. 400mm couping vie on request (Ref: Düker CE Du Ring Couping) Grip Coupings h Pipe Di Bots h Prouct (mm) Coe 50 2 75 90 55 3176/50 70 2 95 110 55 3176/70 100 2 125 140 55 3176/100 125 2 125 165 70 3176/125 150 2 175 190 70 3176/150 200 4 220 255 70 3176/200 A pipe couping imensions in ove tes re verge (couping unfstene). 26 www.umscringe.co.uk

Pipe Coupings n Aptors Aptor Coupings h x Pipe Di Bots h x y Prouct (mm) Coe 70 2 95 110 70 83-84 75-76 3151/070075 100 2 130 145 70 116-119 108-113 3102/100 150 4 180 215 70 168 159 3102/150 Apts ightweight soi to convention rin. y Connect-G Inox High Pressure Coupings e Prt eevtion c Prt section Pipe Di c e Prouct (mm) Coe 50 78 29 17 85 105 234843 70 98 40 25 100 120 234844 100 98 40 25 130 150 234845 125 115 50 35 165 195 234846 150 115 50 35 185 215 234847 200 140 67 35 240 270 234848 250 140 67 35 305 335 234849 300 140 67 35 360 390 234850 400 142 67 35 460 490 234851 Couping with xi restrint for insttions ove or eow groun. A Ring Ruer Coupings Pipe Di Usge Prouct (mm) Coe 100 For use with SML stonewre connectors 100100 125 For use with SML stonewre connectors 100101 150 For use with SML stonewre connectors 100102 200 For use with SML stonewre connectors 100103 O Ring Ruer Coupings Pipe Di Usge Prouct (mm) Coe 100 For use with SML stonewre connectors 100111 125 For use with SML stonewre connectors 100112 150 For use with SML stonewre connectors 100113 200 For use with SML stonewre connectors 100114 A pipe couping imensions in ove tes re verge (couping unfstene). Aumsc Technic Hepine +44 (0) 1744 648400 27

Pipe Coupings n Aptors Konfix Singe (Wste ptor) Pipe Di 1 2 3 4 5 6 Prouct (mm) Coe 50 72 56 48 40 57 66.5 58 100270 70 92 75 63 56 77 85.5 73 100271 100 128 108 104 108 116 102.5 100272 4 3 2 1 6 5 4 3 2 1 Konfix Muti (Wste ptor) Pipe Di 1 2 3 4 5 6 Prouct (mm) Coe 100 134 108 116 90.5 100030 56 48 40 6 5 1 40 32 32 40 Ruer Pipe Joints 1 2 Prouct Coe 50 28-34 100125 50 38-44 100089 1 2 28 www.umscringe.co.uk

Fixing Toos Hrmer Duomt Fixing Too Description Prouct Coe Hrmer Duomt Fixing Too 9 Nm torque setting 3900 For use with Stiness Stee Coupings: Duo n Grip (See pges 39 n 48) 1/ 2 Drive Toos Description Prouct Coe Rchet Hne 1 / 2 Drive 110000 Torque Wrench 1 / 2 Drive - 20 Nm to 40 Nm torque rnge 110001 10mm 1 / 2 Drive Socket 110007 13mm 1 / 2 Drive Socket 110002 18mm 1 / 2 Drive Socket 110003 19mm 1 / 2 Drive Socket 110004 5mm Aen Key 1 / 2 Drive Socket 110008 6mm Aen Key 1 / 2 Drive Socket 110005 8mm Aen Key 1 / 2 Drive Socket 110013 10mm Aen Key 1 / 2 Drive Socket 110012 14mm Aen Key 1 / 2 Drive Socket 110014 10mm Ft Bit with 5 / 16 Hexgon Shnk 110006 (See pge 48 for further etis) 3/ 8 Drive Toos Description Prouct Coe Torque Wrench 3 / 8 Drive - 4Nm to 20Nm torque rnge 110009 5mm Aen Key 3 / 8 Drive Socket 110010 6mm Aen Key 3 / 8 Drive Socket 110011 (See pge 48 for further etis) Aumsc Technic Hepine +44 (0) 1744 648400 29

Pipe Brckets Optim Brcket (For Vertic n Horizont Pipework Appictions) Pipe Di c e f Nom Wt Prouct (mm) (kg) Coe e c 50 102 90 50 57-64 M8/M10 23 0.1 220012 70 127 110 60 73-80 M8/M10 23 0.2 220013 100 163 140 77 108-114 M8/M10 25 0.3 220014 125 190 170 90 133-141 M8/M10 25 0.35 220015 150 228 186 100 159-168 M10 25 0.4 220016 200 273 245 120 200-210 M10 25 0.5 220011 f When use in vertic ppictions, ition stck support is require (See pges 40 n 41) Acousticy teste to EN 14366: 2004 (See pge 43) Optim HD Brcket (For Vertic n Horizont Pipework Appictions) Pipe Di c e f Nom Wt Prouct (mm) (kg) Coe 100 182 160 93 108-116 M10/M12 30 0.5 33143116 125 207 184 104 132-140 M10/M12 30 0.5 33143140 e c 150 254 223 124 159-164 M10/M12 38 1.1 33143169 200 299 267 146 203-213 M10/M12 38 1.5 33143213 250 367 327 175 265-275 M16 48 2.5 33163275 300 453 412 217 315-325 M16 48 3.0 33163323 When use in vertic ppictions, ition stck support is require (See pges 40 n 41) Acousticy teste to EN 14366: 2004 (See pge 43) f Hnging Brcket Pre Gvnise (For Horizont Pipework Appictions) f Pipe Di * f Nom Weight Prouct (mm) (kg) Coe 50 60 M10 58 23 0.1 220045 70 95 M10 78 23 0.2 220046 100 110 M12 110 23 0.3 220047 125 140 M12 135 25 0.35 220048 150 150 M12 160 25 0.4 220049 200 190 M16 220 25 0.5 220050 250 242 M16 276 50 1.5 220051 300 265 M16 328 50 2.0 220052 *Bot not suppie Acoustic Dmpener (B-Fix) Type c Ro Size Sfe Lo* Prouct (N) Coe B-Fix 60 34 40 M10 500 6697005 A noise insuting fixing point for use in cousticy protecte insttions, teste in ccornce with EN 14366: 2004 (See pge 43) * Refers to pu own o (in horizont pipework ppictions) A pipe rcket imensions n weights in ove tes re verge. 30 www.umscringe.co.uk c

Pipe Brckets W Pte n Three Ro c Type c Ro Size Sfe Lo* Prouct (N) Coe W Pte 45 25 80 M10 2000 220006 Three Ro M8x1m 220000 M10x1m 220001 M12x1m 220002 For use with Optim n Optim HD Brckets up to 200mm, for fixe stnoff position (giving istnce of 60mm ± 2mm from w to ck of pipe * Refers to pu own o (in horizont pipework ppictions) Stck Pipe Support Brcket (For Vertic Pipework Appictions) Pipe Di c e f Nom Wt Prouct (mm) (kg) Coe 70 212 114 210 78 13x23 25 2.0 4323/70 100 244 114 210 110 13x23 25 2.2 4323/100 125 269 114 210 135 13x23 25 2.4 4323/125 150 293 114 210 160 13x23 25 2.6 4323/150 200 343 114 250 210 13x23 25 3.0 4323/200 To e use in comintion with Downpipe Support. (See pge 23, 37 n 40) c Pn e f Eevtion (Shown with Downpipe Support fitting) Stn Pipe Support Brcket (For Vertic Pipework Appictions) Pipe Di c e f Nom Wt Prouct (mm) (kg) Coe 70 154 130-140 83-93 78 45-55 75 1.0 3363070 100 176 165-175 100-110 110 45-55 75 1.1 3363100 125 192 190-200 113-123 135 45-55 75 1.2 3363125 150 233 225-235 127-137 160 45-55 75 1.4 3363150 (See pge 37 n 41 for specifiction n insttion etis) Pn c f Eevtion e A pipe rcket imensions n weights in ove tes re verge. Aumsc Technic Hepine +44 (0) 1744 648400 31

Technic Dt: Pipes n Pipe Fittings Quity Stnr Hrmer SML meets the requirements of BS EN 877 n is mnufcture uner ISO 9001: 2000 Quity Mngement System (Certificte No.12 100 21864), n is pprove uner the British Bor of Agrément (BBA Certificte No. 05/4191) Mteri Hrmer SML ringe pipe systems re mnufcture from grey cst iron ccoring to EN 1561 to minimum mteri gre of EN-GJL-150 (EN-JL1020). Cotings Soi n ringe pipe systems hve to perform uner extremey emning conitions with omestic effuents contining ggressive cening gents n chemics. The high-quity coting of Hrmer SML goes eyon the requirements of BS EN 877 see chemic resistnce te eow. SML ringe pipes re externy protecte with nti-corrosive primer coting, which meets fire cssifiction A1. On the insie the pipes re cote with two-prt epoxy coting which offers high resistnce ginst chemic n mechnic mge. Pipe Cotings Extern surfce nti-corrosive primer coting Coour: Re Thickness: Minimum of 40 µm Intern surfce two-prt epoxy coting Coour: Ochre Thickness: Minimum of 120 µm Two-prt epoxy Cst iron Anti-corrosive primer Fitting Cotings SML fittings re interny n externy cote with re two-prt epoxy coting, ip ppie to thickness of 60 µm. Other Cotings For eow groun ppiction n other ggressive conitions, Aumsc offer other coting systems. (See pge 60 for etis) Consut Aumsc Technic Deprtment for further etis. Chemic Resistnce of Interior Cotings of SML Pipes This te ppies to ppictions with intermittent use. Aciic soutions Akine soutions Liqui Up to 23ºC Up to 50ºC Up to 80ºC ph 0 ph 1 (except orgnic cis) ph 2 (except orgnic cis) Lime-issoving sustnces Cening proucts Detergents Disinfectnts Stin removers Oxints Wter (ph 7), sts Drin cering proucts Sovents ph 12 ph 13 ph 14 BS EN 877 Conitions where interior cotings meet chemic resistnce requirements of BS EN 877 Conitions where interior cotings excee chemic resistnce requirements of BS EN 877 32 www.umscringe.co.uk

Technic Dt: Pipes n Pipe Fittings Pipe Weights n Dimension Toernces Nomin Extern Di W Seing Pipe Weight Pipe Di Thickness Zone (kg/m) (mm) Min Mx Min Min Empty Fie 50 57 60 3.0 30 4.3 6.4 70 77 80 3.0 35 5.9 9.9 100 109 112 3.0 40 8.4 17.7 125 133 137 3.5 45 11.8 24.5 150 158 162 3.5 50 14.1 32.3 200 208 212 4.0 60 23.1 54.6 250 271.5 276.5 4.5 70 33.3 87.7 300 323.5 328.5 5.0 80 43.2 120.8 400 426 431 5.0 80 60.0 196.2 Seing zone Couping Extern imeter Toernce Definitions Weights BS EN 877 stiputes: The nomin msses of finishe proucts (pipes, fittings n ccessories) sh e given in the mnufcturers ctogues. When mesure in ccornce with Te 5.3 of the stnr, the ower evition sh not excee 15% of the nomin mss. Lengths In ccornce with cuse 4.2.9 of BS EN 877, engths of fittings sh e within toernce of ±5mm. Lengths of pipes sh e within toernce of ±20mm when mesure in ccornce with cuse 5.2.7 of the stnr. Seing zone Ovity of pipes n the seing zone of fittings sh remin within the toernce of the extern imeter. Pipe W thickness Prouct Ientifiction SML pipes n fittings re ee uring mnufcture in ccornce with the stnr BS EN 877 n cn e cery ientifie s inicte eow. Pipe mrks Mnufcturer s nme Mnufcturer s mrk Prouct nme Germn stnrs mrk GEG quity e Pipe size Stnr reference Europen stnrs conformity mrk Prouction te Country of origin Fow Cpcities of Soi n Wste Systems Mximum fow cpcities (itres per secon) of SML pipes, fowing t vrious grients, with pipes fowing fu (ks vue = 0.6). Pipe Di 1:40 1:60 1:80 1:100 (mm) (/s) (/s) (/s) (/s) 50 1.46 1.19 1.03 0.92 70 4.29 3.50 3.03 2.71 100 9.24 7.55 6.54 5.50 125 16.8 13.7 11.9 10.6 150 27.3 22.3 19.3 17.2 200 58.7 47.9 41.5 37.1 250 106.0 86.9 75.2 67.3 300 173.0 141.0 122.0 109.0 400 416.7 339.9 294.1 262.82 Fitting mrks (oth sies) Mou numer GEG quity e System esign my imit soi n wste fow rtes eow these vues. Higher fow rtes wi e possie for rinwter pipework. Dimeters Mnufcturer s mrk Europen stnrs conformity mrk For vertic fow cpcities refer to BS EN 12056: 2000, Prts 2 n 3. Brnch nge Certifiction mrk Dte of mnufcture Stnr reference Aumsc Technic Hepine +44 (0) 1744 648400 33

Technic Dt: Coupings Introuction Hrmer SML coupings re vie in either uctie iron or stiness stee n meet the requirements of BS EN 877. The intern pressure performnce of coupings rnges from 0.5 r to 10 r. A coupings feture EPDM estomeric ses s stnr. Neoprene ruer ses re vie on request. The Hrmer rnge of coupings hs een put together with the inster in min. The Hrmer Duo n Hrmer Grip twin ot coupings offer quick n esy insttion. The coupings re suppie rey to fit onto the pipe, n there is no nee to ismnte; simpy push fit over the Hrmer SML pipe n tighten to the require torque setting. For efficient insttion, use the Hrmer Duomt Fixing Too which simutneousy tightens the ots to the require torque. (See pge 39 for insttion etis) Ductie iron couping Stiness stee couping High pressure couping Ductie Iron Coupings The Hrmer SML Ductie couping is two-prt couping with n integrte eectric continuity connection. Avie in 50 to 200mm imeters the coupings re me from uctie iron gre EH-GJS-400-15 n cote in re epoxy. Incorporting n EPDM gsket, the couping is ote together using M8 ots. The eectric continuity is ctivte y tightening two screws octe on either sie of the couping. (See eti on pge 35 n 38) Hrmer SML Ductie Stiness Stee Coupings The Hrmer SML Duo couping is n erth continuous, ove-groun, twin-screw stiness stee couping vie for Hrmer SML pipes n fittings, for pipe connections from 50 to 300mm imeter. The Duo continuity couping cn e use (where require y current egistion) to provie erth continuous conuctnce through the soi stck. When irect contct of met components is require, eectric testing of ech joint, s work progresses, is recommene. Hrmer SML Duo The Hrmer SML Grip couping is n erth continuous, ove-groun, twin screw stiness stee couping vie in 50mm to 200mm imeter. The Grip couping cn e use s n terntive to the Duo couping where higher intern pressure performnces re require. (See te on pge 35) Hrmer SML Grip The Hrmer SML Aptor couping is use when it is necessry to mke connection etween BS EN 877 ightweight cst iron soi systems n convention cst iron thick w rin systems. This couping oes not incorporte ny provision for eectric continuity. Hrmer SML Aptor High Pressure Coupings The Hrmer SML Connect-G Inox couping is use to provie xi restrint up to 10 r for pipes inste ove n eow groun. Hrmer SML Connect-G Inox 34 www.umscringe.co.uk

Technic Dt: Coupings Coupings Dt Hrmer SML Couping Mteri Type Di Rnge Pressure Rting Torque (mm) Unrestrine Restrine* Ductie Ductie iron Mechnic 50 to 200 0.5 r 5 r 20 Nm Duo Stiness stee Mechnic 50 to 300 0.5 r 50 to 100mm = 3 r 50 to 200mm = 5 r 250 n 300mm = 3 r 3.5 Nm to 9 Nm Grip Stiness stee Mechnic 50 to 200 125mm = 1.5 r 5 r 7 Nm to 9 Nm 150 n 200mm = 1 r Aptor Stiness stee Mechnic 100 n 150 0.5 r 5 r 3.5 Nm to 5.5 Nm Connect-G Inox Stiness stee Mechnic 50 to 400 * Fixe to prevent movement. 50 to 300mm = 10 r 50 to 300mm = 10 r 400mm = 6 r 400mm = 6 r As stte on couping Eectric Continuity The Hrmer Ductie, Duo n Grip coupings wi stisfy the eectric continuity requirements of the IEE regutions provie tht the SML pipework is one to n eectric erth n these coupings re sseme, inste n tightene to the correct torque in ccornce with our recommentions. The proceure for testing eectric continuity shou e in ccornce with the requirements of BS EN 877 s foows: If provision is me for eectric continuity, the eectric resistnce of the couping sh not excee 0.3 ohms, when teste in ccornce with the foowing proceure: Appy steiy incresing votge not exceeing 50V c, 50 Hz, cross the junction unti stey current of 25±1A fows through the couping. Aow the current to fow for 30 secons, mintining it s necessry y justing the votge. Ccute the resistnce of the couping y iviing the oserve votge y the current. The insttion shou e regury checke for mge, or when moifictions re propose, to ensure tht eectric continuity is mintine. Eectric continuity spurs (Spurs pierce extern coting of pipe when couping ots tightene) Eectric continuity screws (Screws pierce extern coting of pipe when tightene) Hrmer SML Ductie Couping Hrmer SML Pipe Hrmer SML Duo Couping (EPDM gsket not shown for crity) Hrmer SML Pipe Hrmer Ductie Couping insttion Hrmer Duo Couping insttion Aumsc Technic Hepine +44 (0) 1744 648400 35

Technic Dt: Brckets Introuction Hrmer SML rckets re vie to support ove-groun pipework, oth verticy n horizonty. The rnge comprises vertic n horizont support rckets which re zinc pte n fitte with soun eening ruer inings. Unine rckets re so vie on request. Pese contct Aumsc Technic Services for etis. Optim Brcket The Hrmer Optim rcket is gener purpose rcket use for vertic n horizont restrint of pipes up to 200mm imeter. In vertic ppictions this rcket must e use in conjunction with vertic support rcket. (See pge 40 n 41 for etis) Fetures n Benefits Zinc pte Anti-virtion geing-resistnt EPDM ruer ining Acousticy teste to BS EN 14366: 2004 Unique tching evice (100mm imeter ony) Optim Brcket Dt Pipe Di Connecting Boss Bot Size Bot He Type Sfe Lo (mm) ( G on rwg) ( S on rwg) (N / kg)* 50 M8 / M10 M6 x 25 10mm hexgon he 1490N / 149kg with comi sot 70 M8 / M10 M6 x 25 10mm hexgon he 1490N / 149kg with comi sot 100 M8 / M10 M6 x 25 10mm hexgon he 2170N / 217kg with comi sot 125 M8 / M10 M6 x 25 10mm hexgon he 2170N / 217kg with comi sot 150 M10 M6 x 35 13mm hexgon he 2170N / 217kg with sot 200 M10 M6 x 35 13mm hexgon he 2170N / 217kg with sot * Los stte re pu own os n ppy to horizont pipework ppictions ony. When use in vertic ppictions ition stck support is require. G Hexgon hee screw with comi-sot M8 M10 u tppe oss S Optim HD Brcket The Hrmer Optim HD rcket is roust rcket suite for vertic n horizont restrint of pipes up to 300mm imeter. In vertic ppictions this rcket must e use in conjunction with vertic support rcket. (See pge 40 n 41 for etis) Fetures n Benefits Zinc pte Ageing-resistnt EPDM ruer ining Acousticy teste to BS EN 14366: 2004 Cptive ocking nut with nti-oss wsher for ese of insttion (up to n incuing 125mm) CO 2 wee connection oss Optim HD Brcket Dt Pipe Di Connecting Boss Bot Size Bot He Type Sfe Lo (mm) ( G on rwg) ( S on rwg) (N / kg)* 100 M10 / M12 M8 x 35 13mm hexgon he 2800N / 280kg 125 M10 / M12 M8 x 35 13mm hexgon he 2800N / 280kg 150 M10 / M12 M10 x 40 17mm hexgon he 3900N / 390kg 200 M10 / M12 M12 x 50 19mm hexgon he 3900N / 390kg 250 M16 M12 x 50 19mm hexgon he 6500N / 650kg 300 M16 M12 x 50 19mm hexgon he 6500N / 650kg * Los stte re pu own os n ppy to horizont pipework ppictions ony. When use in vertic ppictions ition stck support is require. G S M10 M12 u tppe oss (up to n incuing 200mm) 36 www.umscringe.co.uk

Technic Dt: Brckets Stck Pipe Support Brcket The Hrmer Stck Pipe Support rcket is suite for supporting vertic pipework up to 200mm imeter. The rcket consists of cntiever rm n two-prt ruer ine cmp. Hrmer Downpipe Support fitting must so e use in conjunction with this rcket. (See pge 40 for insttion etis) Fetures n Benefits Zinc pte CO 2 wee cntiever rm Ageing resistnt EPDM ruer ining Ajuste istnce etween pipe n w Stck Pipe Support Brcket Dt Pipe Di Connecting Nut Cmp Bot Bot He Type Sfe Lo Fy (mm) ( G on rwg) Size (N / kg)* 70 M8 x 16 M8 x 25 13mm hexgon he 3000N / 300kg with sot 100 M8 x 16 M8 x 25 13mm hexgon he 3000N / 300kg with sot 125 M8 x 16 M8 x 25 13mm hexgon he 3000N / 300kg with sot 150 M8 x 16 M8 x 25 13mm hexgon he 3000N / 300kg with sot 200 M8 x 16 M8 x 25 13mm hexgon he 3000N / 300kg with sot * Sfe o is mesure t 130mm from w to centre of cmp/pipe. * Pese see pge 40 for insttion recommention with SML pipework. Pese contct Aumsc Technic Services for informtion on stck pipe support systems for pipework ove 200mm imeter. G Fy Stn Pipe Support Brcket The Hrmer Stn Pipe Support rcket is suite for supporting vertic pipework up to 150mm imeter. The rcket consists of two-point w pte ssemy with ter justment n twin pipe-cmp ssemy. (See pge 41 for insttion etis) Fetures n Benefits Zinc pte CO 2 wee Stn Pipe Support Brcket Dt Pipe Di Connecting Nut Cmp Bot Bot He Type Sfe Lo Fy (mm) ( G on rwg) Size (N / kg)* 70 M10 with 17mm M8 x 25 13mm hexgon he 650N / 65kg hexgon nut with comi sot 100 M10 with 17mm M8 x 25 13mm hexgon he 820N / 82kg hexgon nut with comi sot 125 M10 with 17mm M8 x 25 13mm hexgon he 820N / 82kg hexgon nut with comi sot 150 M10 with 17mm M8 x 25 13mm hexgon he 820N / 82kg hexgon nut with comi sot * Pese see pge 41 for insttion recommention with SML pipework. Ageing resistnt EPDM ruer ining Lter justment G Fy Aumsc Technic Hepine +44 (0) 1744 648400 37

Insttion: Ductie Iron Couping 1. Scken the ots on the Ductie Iron couping, fuy removing one ot competey. Remove the EPDM ruer gsket. 2. Push the EPDM ruer gsket over the en of the pipe or fitting ensuring tht the centr inner register is utte ginst the spigot en. 3. Ese the next pipe or fitting into the EPDM ruer gsket mking sure tht the spigot en is ginst the centr inner register. 4. Loosey fit the couping roun the gsket, ensuring tht the ruer ip sits into the corresponing octor in the couping. The eectric continuity screws shou e rwn ck to fuest extent to voi interference with the connecting pipe or fitting. 5. Check the ignment of the ssemy efore tightening the ots. Aterntey tighten the ots to ensure tht the couping is igne eveny. Bots shou e tightene unti resone resistnce is chieve recommene torque setting 20 Nm. 6. For eectric continuity, hntighten the eectric continuity screws on oth sies. Ensure screws pierce extern coting of pipe when tightene. (See pge 35) A Ductie iron coupings use n M8 ot n require 6mm en key. The couping incorportes n nti-turn feture which hos the ot nut in pce without the nee for seconry too. (See pge 29 n 48 for etis of fixing toos) 38 www.umscringe.co.uk

Insttion: Stiness Stee Couping 1. Hrmer Duo coupings re suppie fctory sseme n rey to fit. 2. Ese-in one sie (next to the continuity spur) then push own on the opposite sie of the couping to fuy set, ensuring tht the centr inner register is utte ginst the spigot en. 3. Ese the next pipe or fitting into the couping s step 2. 4. Eveny tighten the ots to the require torque setting. The couping shou ony e tightene once ecuse it cn not e ismnte n re-use. (See Coupings Specifiction pge 34) 5. The Hrmer Duomt fixing too is recommene for securing Hrmer Duo coupings. Bots cn e tightene simutneousy with precision. Torque wrench, rtchet hne n sockets A compete rnge of high quity fixing toos is vie from Aumsc. (See pges 29 n 48 for etis) Note: Hrmer Duo, Grip n Aptor coupings require 5mm en key. Duomt too Aumsc Technic Hepine +44 (0) 1744 648400 39

Insttion: Vertic Pipe Support Support for Vertic Pipework Vertic pipework must e supporte with o ering rcket to crry the weight of the pipe n its contents. (See pge 33 for fie pipe weights) The purpose of these o ering rckets is to support the stck s it is uit up to prevent ownwr movement of the pipe n unnecessry o t the se of the stck, n to mintin expnsion gps. Vertic Support Using Stck Pipe Brcket It is recommene tht Hrmer SML is supporte using Stck Pipe Support Brckets in comintion with Optim rckets s shown eow. Aterntivey, Stn Pipe Support Brckets cn e use. (See etis on pge 41) Connections joining the vertic stck shou so e equtey supporte ove n eow every rnch. The vertic pipe shou e fixe not coser thn 30mm to the w to ow mintennce n pinting of the pipe. Stck Pipe Support Brckets A Stck Pipe Support Brcket must e provie t sement eve n therefter s recommene in the te eow. Typicy 100mm pipe in uiing with n verge of 2.5m foor to ceiing height wi nee to e supporte every fifth foor. In ition, Hrmer Optim Brckets shou e inste t mximum 2m centres s iustrte. 2000 mximum 2500 Stck Pipe Support Brcket Centres Nomin Weight/m Stck Pipe Theoretic Recommene Pipe Di (fie) Sfe Lo* Cmp Centres Cmp Centres** (mm) (kg) (N/kg) (m) 70 9.9 3000N / 300kg 30.3 1 every 5th foor 100 17.7 3000N / 300kg 16.9 1 every 5th foor 125 24.5 3000N / 300kg 12.2 1 every 3r foor 150 32.3 3000N / 300kg 9.3 1 every 3r foor 200 54.6 3000N / 300kg 5.5 1 every 2n foor *Sfe o is mesure t 130mm from w to centre of pipe; incresing this istnce wi reuce the sfe o. **Assumes 2.5m storey height 2000 mximum 30 minimum 2500 Hrmer Optim Brcket shown with W Pte SML Downpipe Support Stck Pipe Support Brcket Stck Pipe Support Brcket shown with SML Downpipe Support 130 mximum 40 www.umscringe.co.uk

Insttion: Vertic Pipe Support Stn Pipe Support Brckets The Stn Pipe Support Brcket is n terntive vertic pipe support rcket n cn e use where site conitions o not permit the use of the Stck Pipe Support Brcket. The numer of Stn Pipe Support Brckets neee vries ccoring to the stck weight. The te eow gives etis of the mximum istnce etween ech rcket. Vertic Support Using Stn Pipe Brcket Stn Pipe Support Brcket Centres Nomin Weight/m Stn Pipe Theoretic Recommene Pipe Di (fie) Sfe Lo Cmp Centres Cmp Centres* (mm) (kg) (N/kg) (m) 70 9.9 650N / 65kg 6.6 1 every 2n foor 100 17.7 820N / 82kg 4.6 1 every 2n foor 150 32.3 820N / 82kg 2.5 1 every foor *Assumes 2.5m mximum storey heights 2000 mximum IMPORTANT Where Stn Pipe Support Brckets re over 2m centres, ition Hrmer Optim Brckets shou e inste to support pipework t mximum 2m centres. 2500 2000 mximum 30 minimum 2500 Hrmer Optim Brcket shown with W Pte 2000 mximum Hrmer Optim Brcket Stn Pipe Support Brcket Aumsc Technic Hepine +44 (0) 1744 648400 41

Insttion: Horizont Pipe Support Support for Horizont Pipework Horizont pipework shou e i to minimum f of 20mm per metre, n feeer pipes shou e connecte to the min pipe using 45 egree rnch in the irection of the fow. Refer to BS EN 12056-2: Coe of Prctice for Snitry Pipework for etis. Duo Couping 750 mximum 2000 mximum 750 mximum It is recommene tht ech pipe ength in horizont pipe run shou e supporte y 2 rckets, not more thn 2m prt. The ength of pipe etween rcket n couping shou not excee 750mm. The pipe shou e supporte t every chnge in irection or rnch. At every 10-15m, fixing rm shou e ttche to rcket to prevent penur movement of the pipe run. See eti eow. Hrmer SML horizont rcket n fixing rm Aterntive rrngement for pipework with rop ength over 1 metre. Hrmer Optim Brcket Min support ro Seconry ro for ter support Hrmer Optim Brcket M8-M12 three ro (not suppie) See jcent te Hrmer Optim HD Brcket Three Ro Dt Optim HD Three Brcket Ro Dimeter 100 8 125 8 150 10 200 12 250 12 300 12 A imensions re in mm. The requirement for penur restrint my e remove if the pipework hs rnches entering t 45 or 90 egrees which re supporte y t est two hngers. (See Brckets Specifiction on pges 36 n 37 for etis of sfe o weights of rckets) 42 www.umscringe.co.uk

Insttion: Acoustic Protection Introuction The ischrge of soi, wste n rinwter through pipe genertes structure-orne n irorne soun etween hite spces n usuy occurs ecuse the pipe is fie with mixture of ir n wter. The resutnt noise wi then e trnsmitte to ightweight ceiings, cupors n simir constructions. Top foor Test fow rtes: ) 0.5 /s ) 1.0 /s c) 2.0 /s ) 4.0 /s Cst iron pipe systems however, ecuse of the high mss per unit re of their pipe ws s we s the joint esign chrcteristics, provie consiere noise reuction enefits when ischrging soi, wste n rinwter within uiings. Testing n Certifiction Mie foor W: 220 kg/m 2 BS EN 14366: 2004: Lortory mesurement of noise from wste wter insttions sets out common test metho y which irorne n structure-orne noise emitte y inste ischrge systems is mesure. Hrmer SML hs een inepenenty teste to this new stnr s certifie y the Frunhofer Institute of Buiing Physics test report P-BA 164/2008e n P-BA 165/2008e. See te eow. BS 8233: Coe of Prctice for Soun Insution n Noise Reuction for Buiings, provies guieines for inoor mient noise eves for vrious room uses. The gener requirement for resienti/hite rooms is 30-35 B; the owest esign rnge is 20-25 B for recoring stuios. The Hrmer SML system is e to meet these ow eves of coustic performnce. W: 220 kg/m 2 Lower foor (rer) (front) Frunhofer Test Assemy The Frunhofer Institute of Buiing Physics test fciity is constructe to 220 kg/m 2 w ensity. One of the most importnt prmeters in the context of Structur-ourne soun is w ensity, s chnges cn grety ffect the insttion soun eve. For exmpe, w ensity reuce to 140 kg/m 2 gives n increse in ortory coustic mesurement of 4 B t 4 /s. It shou e note tht test t conucte in controe ortory cnnot e trnsferre to other uiing conitions without restrictions. Test Dt Pipe n Brcket Type Airourne Soun Pressure Structure-ourne Soun Numer of W (see rwing) Leve L,A [B(A)] Chrcteristic Leve L SC,A [B(A)] Brckets Use Density (see note ) (see note ) (kg/m 2 ) Fow rte 0.5 /s 1.0 /s 2.0 /s 4.0 /s 0.5 /s 1.0 /s 2.0 /s 4.0 /s 1. Hrmer SML with Optim ruer-ine rckets 45 48 22 27 2 220 2. Hrmer SML with Optim ruer-ine rckets n spcers 39 43 45 48 9 14 19 24 2 220 3. Hrmer SML with Optim ruer-ine rckets with coustic mpener (B Fix) 38 43 45 47 5 9 14 19 2 220 n W Pte () Lower foor: front () Lower foor: rer Aumsc Technic Hepine +44 (0) 1744 648400 43

Insttion: Connection to Other Mteris Connection to Ruer Other Joints/Boss Mteris Pipes Ruer Joint (Boss) Aows connection from Hrmer SML 50mm pipework to 28-44mm pipework, for exmpe 40mm(1 1 /2 ) pstic wste pipe. The ruer joint simpy pushes into the receiving pipe owing smer imeter pipe to e pushe into the ruer joint. Wste pipe: 40mm(1 1 /2 ) SML Reucer 100 x 50mm Hrmer Duo Couping Ruer Joint (Boss) SML Connecting Insertion Prouct Pipe Di Pipe Di Depth Coe 50 28-34 40 100125 50 38-44 40 100089 A imensions re in mm. SML Singe Brnch 88 100 x 50mm Ruer Joint: 38-44mm Prouct Coe: 100089 Wste pipe: 40mm(1 1 /2 ) Tppe En Cp An en cppe, rie n tppe to 2 BSP, owing irect connection to 2 me BSP three pipe or to other pipe size using 2 BSP me iron ptor (suppie y others). Wste pipe: 50mm 2 BSPT me iron ptor (y wste pipe mnufcturer) Hrmer Duo Couping Tppe En Cp Dt SML Prouct Pipe Di Coe 50 665504TE* 70 665514TE 100 665524TE 150 665544TE 200 665554TE A imensions re in mm. *Tp imeter is (1 1 /2 ) BSP Tppe En Cp: 100mm Prouct Coe: 665524TE SML Pipe 100mm Boss Pipe Avie in 100mm n 150mm i, oss pipes re rie n tppe to 2 BSPT. 100mm oss pipes re vie in singe, oue or corner versions, 150mm oss pipe is vie with singe n oue oss. (See pge 22 for etis) SML Singe Boss 2 BSPT me iron ptor (y wste pipe mnufcturer) Boss Pipe Dt SML Type Prouct Pipe Di Coe 100 Singe 663114B 100 Doue 663114DB 100 Corner 663114CB 150 Singe 232746 150 Doue 237738 A imensions re in mm. 50mm wste pipe Singe Boss Pipe: 100mm Prouct Coe: 663114B Aumsc Technic Hepine +44 (0) 1744 648400 45

Insttion: Mnifo Connection Introuction The Hrmer SML Mnifo Connector eses wste connection y owing up to 4 connections into this compct mnifo. The Mnifo Connector is vie in 100mm i n cn e connecte irecty onto 100mm i Hrmer SML pipe stck using ny stnr coupings. Wste pipework from vrious sources such s sins, urins, ths n showers cn e convenienty connecte to singur point ove the finishe foor eve. The Mnifo Connector incorportes four ruer grommets which wi permit the connection of 32mm(1 1 /4 ) or 40mm(1 1 /2 ) pstic wste pipes. 287 42 240 60 42 Insttion Guieines 90º 287 Insttion of Mnifo Connector The Mnifo Connector oy is connecte to the stck using stnr coupings. Insttion of pstic pipe ens 1. Remove the grommets n pierce the pproprite groove for 32mm(1 1 /4 ) or 40mm(1 1 /2 ) wste connections. 2. Appy pproprite siicon sent (not provie) to the outsie of the grommet n re-fit into the Mnifo Connector, mking sure tht the groove of the grommet is pce correcty in the csing. Ensure sent is cure efore ir testing. 3. Luricte the pipe ens with n pproprite uricnt n insert them into the grommets with rottion movement. The pipe ens my e chmfere for ese of insertion. 100mm pipe or pipe fitting Wste pipe: 32mm(1 1 /4 ) or 40mm(1 1 /2 ) Hrmer Duo couping Ruer grommet SML Mnifo Connector Hrmer Duo couping 100mm pipe stck 46 www.umscringe.co.uk

Insttion: Other Connections Stonewre Connections WC Connection WC connections cn e me y using the Hrmer SML Stonewre Connector. Aterntivey, Hrmer SML wi ccommote fexie push-fit type connectors. Cywre Connect Hrmer SML to cywre y using Hrmer SML Stonewre Connector with trition cement joint. Trition Soi Connect Hrmer SML to trition soi y using Hrmer SML Stonewre Connector with trition cuke joint. Stonewre Connector Roof Connections Projections Through Roof Where vent pipe projection occurs through roof s with mstic spht, the wterproofing must e resse with wethering cor to height t est 150mm ove the roof surfce. Proprietry mesh gri (suppie y others) Proprietry wethering cor secure with circip (suppie y others) Insution Wterproofing Aumsc Technic Hepine +44 (0) 1744 648400 47

Insttion: Fixing Toos Fixing Toos Drive Type Prouct Description For Use With Coe 3900 Hrmer Duomt Torque Chuck Stiness Stee Coupings 110000 Rchet Hne 1 / 2 Drive For use with 1 / 2 Drive 110001 Torque Wrench 1 / 2 Drive - 20Nm to 40Nm torque rnge Coupings with 20Nm to 40Nm torque rnge 110007 10mm 1 / 2 Drive Socket Hrmer Optim Brcket 110002 13mm 1 / 2 Drive Socket 70, 100, 150mm Access Bens, Swept Entry Brnches, En Cps, Brnch Trps 110003 18mm 1 / 2 Drive Socket 150mm Access Pipe Rectngur Door, Brnch Trp 1/ 2 Drive 110004 19mm 1 / 2 Drive Socket A pipe seing fnges 110008 5mm Aen Key 1 / 2 Drive Socket Stiness Stee Coupings 110005 6mm Aen Key 1 / 2 Drive Socket Ductie Iron Coupings 110013 8mm Aen Key 1 / 2 Drive Socket 70, 100mm Connect-G Couping 110012 10mm Aen Key 1 / 2 Drive Socket 125, 150mm Connect-G Couping 110014 14mm Aen Key 1 / 2 Drive Socket 200 400mm Connect-G Couping 110006 10mm Ft Bit with 5 / 16 Hexgon Shnk Gener purposes 110009 Torque Wrench 3 / 8 Drive - 4Nm to 20Nm torque rnge Coupings with 4Nm to 20Nm torque rnge 3/ 8 Drive 110010 5mm Aen Key 3 / 8 Drive Socket Stiness Stee Coupings 110011 6mm Aen Key 3 / 8 Drive Socket Ductie Iron Coupings Duomt Fixing Too Suite for power toos, the Duomt Fixing Too is recommene for securing Hrmer SML coupings. Bots cn e tightene simutneousy with precision. For etis of viiity pese contct Aumsc. Cutting Pipes Hrmer SML pipe cn e reiy cut y the use of powere isc-cutter, porte nsw or with whee cutters. Ensure the correct gre of isc pproprite to cst iron is use for isc-cutter. Cot cut ens of pipes with pproprite touch-up pint (vie on request). Oserve the Heth n Sfety guieines from the cutting too mnufcturer s opertion mnu. 48 www.umscringe.co.uk

Guieine to NBS Specifiction Stnr specifiction guieines for 100mm imeter Hrmer SML soi n wste system re provie eow. NBS formt specifictions (R11 Aove-Groun Fou Dringe Systems) re vie for owno on the Aumsc wesite. Aove-Groun Fou Dringe Systems Incusive of snitry n foor ringe outets; wste pipework; ischrge stck n rnch pipework; seprte ventiting pipework; ccessories n ispos. System Performnce Design to compy with BS EN 12056: 2000, Prts 1, 2 n 5. Proucts Hrmer SML: Cst iron pipework for intern use. Mnufcturer: Aumsc Exterior Buiing Proucts Lt, St Heens, Merseysie WA9 4JG. Pipes n fittings: To BS EN 877 with fexie joint coupings, Agrément certifie. Accessories: As require. Size: 100mm imeter. Metho of fixing: Brcket fixe t mximum 2.0m centres when horizont, ut pipe projection eyon ech rcket shou not excee 750mm. Pipe shou e supporte t every chnge of irection or rnch n every 15m fixing rm shou e ttche. Horizont pipeine must e i to minimum 20mm per metre f. Feeer pipes shou e connecte to the min pipe using 45º rnch connector in the irection of fow. Brcket fixe t 2.0m centres when vertic supporte with o ering rcket t every foor equtey supporte ove n eow every rnch. Pipes shou not e fixe coser thn 30mm to w. For uiing of five or more foors pus sement, with n verge 2.5m per foor, ownpipe support fitting must e provie t the sement eve n every ition fifth foor. Execution Gener insttion: To BS EN 12056: 2000, Prts 1, 2 n 5. Components: From the sme mnufcturer for ech type of pipework. Eectroytic corrosion: Avoi contct etween issimir mets where corrosion my occur. Aownce for therm n uiing movement: Provie n mintin cernce s fixing n jointing procees. Concee or inccessie surfces: Decorte efore strting work specifie in this section. Protection (purpose me temporry cps): Fit to prevent ingress of eris. Protection (ccess covers, cening eyes n nking ptes): Fit s the work procees. Pipe Routes Gener: The shortest prctice, with s few ens s possie. Short rius ens in wet portion of soi stcks: Not permitte. Routes not shown on rwings: Sumit proposs efore commencing work. Fixing Pipework Pipework: Fix securey pum n/or true to ine. Fix ischrge stck pipes t or cose eow socket cor or couping. Brnches n ow grient sections: Fix with uniform n equte fs to rin efficienty. Externy sockete pipes n fittings: Fix with sockets fcing upstrem. Aition supports: Provie s necessry to support junctions n chnges in irection. Vertic pipes: Provie o ering support not ess thn every storey eve. Tighten fixings s work procees so tht every storey is sef supporting. W n foor penetrtions: Isote pipework from structure, e.g. with pipe seeves. Msking ptes: Fix t penetrtions if visie in the finishe work. Expnsion joint sockets: Fix rigiy to the uiing. Fixings: Aow the pipe to sie. Jointing Pipework - Genery Gener: Joint with mteris, fittings n techniques tht wi mke effective n ure connections. Jointing iffering pipework systems: With ptors intene for the purpose. Cut ens of pipes: Cen n squre. Remove urrs n swrf. Jointing or mting surfces: Cen immeitey efore ssemy. Junctions: Form with fittings intene for the purpose. Jointing mteri: Do not ow it to project into ore of pipes n fittings. Jointing Pipework Cst iron, fexie coupings jointing: Pint cut ens of pipes. Cote Pipes Cutting: Recot re met. Eectric Continuity Joints in met pipes with fexie coupings: Mke with cips (or suite stnr pipe coupings) suppie for erth oning y pipework mnufcturer to ensure eectric continuity. Ientifiction of Intern Fou Dringe Pipework Mrkings: To BS 1710. Type: Integr ettering on pipe w, sef-hesive ns or ientifiction cips. Loctions: At 500 mm centres, junctions n oth sies of ss, vves, ppinces, ukhes n w penetrtions. Dischrge n Ventiting Stcks Termintions: Perforte cover or cge tht oes not restrict irfow. Mteri: Stiness Stee, upvc or HDPE. Insting Air Amittnce Vves Position: Vertic, ove foo eve of highest ppince serve n cer of insution mteris (other thn the mnufcturer's insuting cover). Connection to ischrge stck: Aow remov for roing, e.g. ring se. Roof spces n other unhete octions: Fit mnufcturer's insuting cover. Access for Testing n Mintennce Gener: Inst pipework with equte cernce to permit testing, cening n mintennce, incuing pinting where necessry. Access fittings n roing eyes: Position to voi ostruction. Competion n Testing Dtes for testing: Give minimum of 3 ys notice. Pipework preprtion: Securey fixe n free from ostruction n eris. Trps preprtion: Fie with cen wter. Testing: Suppy cen wter, ssistnce n pprtus. Do not use smoke to trce eks. Recors: Sumit recor of tests. Pipework Airtightness Test Open ens of pipework: Temporriy se using pugs. Test pprtus: Connect 'U' tue wter guge n ir pump to pipework vi pug or through trp of n ppince. Testing: Pump ir into pipework unti guge registers 38 mm. Require performnce: Pressure of 38 mm is to e mintine without oss for t est three minutes. Siphonge n Bck Pressure Tests WC pns: Test y fushing. Other ppinces: Test y fiing to overfow eve, then removing the pug. Numer of tests: Test ech ppince three times. Rechrge trps efore ech test. Sef siphonge testing: Test ech ppince iniviuy. Inuce siphonge n ck pressure testing: Test y ischrging the foowing numers of ppinces simutneousy on ech stck: WCs; Wshsins; Sinks: To e confirme y empoyers gent Seection of ppinces: Sumit proposs. Pre-hnover Checks Temporry cps: Remove. Permnent nking cps, ccess covers, roing eyes, foor grtings n the ike: Secure compete with fixings. Aumsc Technic Hepine +44 (0) 1744 648400 49

Hrmer Dringe Outets n Aptors Introuction Aumsc's we estishe rnge of Hrmer proucts provies unique singe source for innovtive mrket-eing soutions cross the whoe spectrum of rinwter hning n uiing ringe. The extensive rnge of Hrmer outets incues Roof, Foor n Shower ringe soutions for reti, inustry n eisure compexes. Hrmer outets re comptie with most pipework systems n cn e use in comintion with the Hrmer SML pipe system to provie roust ringe soution tht wi continue to perform for the ife of the uiing. Hrmer Roof Outets Hrmer Roof Outets, in either uminium oy or gunmet, provie comprehensive n innovtive ringe soutions for types of ft roof, incuing cr prks, n so for ow pitch inustri roofing. The rnge is primriy suite to new uiing ppictions, ut so incues seection of refurishment outets. Hrmer Roof Outets cn e connecte to Hrmer SML using the stnr rnge of coupings. Hrmer Roof Outets re vie in two rnges: Hrmer AV high cpcity outets for ft roof ppictions Hrmer Deti for speci ppictions The AV rnge provies comprehensive choice of high performnce outets with circur fnges, suite for regur ft roofing ppictions with continuous memrnes. Hrmer AV outets re vie with spigot or screw connection, for vertic, horizont or 45 egree ischrge. The Deti rnge incues outets for ppictions such s conies, gueys n cr prks, n two wy outets for use where the roof surfce uts w or prpet. Hrmer Foor Drins Drin oies in power cote uminium, together with eegnt grtes, comine to crete n unete rnge of foor rins to suit virtuy ny interior ringe ppiction n types of fooring. Hrmer Foor Drins re vie either trppe or untrppe, with vertic or horizont spigot connection, n with or without sie inets for connection from sink, th, shower wstes, etc. The extensive rnge of grtes incues roun n squre configurtions vie in high quity stiness stee or nicke ronze. The Hrmer Foor Drin offers gret fexiiity of choice, with stnr rnge of interchngee components tht re fst n strightforwr to sseme n inst. Hrmer Foor Drins cn e connecte to Hrmer SML using the stnr rnge of coupings. For suspene concrete foor ppictions Aumsc hve eveope strightforwr Pipe Aptor which connects grte ssemy irecty onto Hrmer SML. (See pge 57 for etis) Hrmer Shower Drins Compct size n high performnce ensure tht the Hrmer Shower Drin is iey suite to oth refurishment n newui projects. There re two sic versions. The Vertic Spigot shower rin hs een esigne for insttion in precst/pre-stresse concrete foor systems, whist the Horizont Spigot version is compct rin (over height 158mm) n is ie for insttion in timer foors where it cn fit unotrusivey within the foor voi. In oth cses, the esign is se on e component which forms the trp n provies fst n sient ringe roun the perimeter of the unit. The top surfce of the e is expose when fexie sheet foor is use n is vie in wie rnge of finishes incuing sfety inserts, to coorinte with the sheet foor finish. For tie foors, tie grte kits re vie in choice of poyester coour cotings, nicke ronze or stiness stee. (See pges 51-53) (See pges 54-56) (See pges 58-59) 50 www.umscringe.co.uk

Hrmer Roof Outets Vertic Spigot Outets (Anti-Vortex Rnge) Ft grte (option) Domic grte Pipe Di c Prouct (mm) Coe 50 292 98 98 60 AV200 75 292 88 108 83 AV300 100 380 122 122 110 AV400 150 380 98 145 160 AV600 c Vertic Screw Outets (Anti-Vortex Rnge) Ft grte (option) Domic grte c Pipe Di c Prouct (mm) Coe 50 292 86 35 AV200T 75 292 76 45 AV300T 100 380 95 38 AV400T 150 380 76 38 AV600T 45º Spigot Outets (Deti Rnge) Ft grte (option) Domic grte Pipe Di c Prouct (mm) Coe 50 305 229 175 62 245 75 305 235 175 87 345 100 372 273 191 114 445 c 45º Screw Outets (Deti Rnge) Ft grte (option) Domic grte Pipe Di c Prouct (mm) Coe 50 305 159 109 245T 75 305 159 109 345T 100 372 186 113 445T c 90º Spigot Outets (Deti Rnge) Ft grte (option) Domic grte Pipe Di c Prouct (mm) Coe 50 305 124 232 62 290 75 329 121 267 83 390 100 405 142 285 110 490 c Aumsc Technic Hepine +44 (0) 1744 648400 51

Hrmer Roof Outets 90º Screw Outets (Deti Rnge) Ft grte (option) Domic grte Pipe Di c Prouct (mm) Coe 50 305 127 140 290T 75 305 127 140 390T 100 356 172 152 490T 150 356 225 152 690T c Two-Wy Outet (Deti Rnge) 45º c Pipe Di c Prouct (mm) Coe 50 125 140 130 190 2TW-M 50 204 214 191 255 2TW 75 204 214 191 255 3TW 100 204 214 191 255 4TW 150 280 265 250 316 6TW Bcony Outets (Deti Rnge) X Pipe Di c e Prouct (mm) Coe 50 270 110 125 242 60 2BO 75 270 110 125 242 83 3BO 100 270 110 125 242 110 4BO X c e Section XX Cr Prk Outets (Deti Rnge) c Pipe Di c Prouct (mm) Coe 100 380 305 95 38 400T/CP 100 380 305 76 38 600T/CP 150 305 95 38 400T/DD 150 305 76 38 600T/DD Coe suffix CP inictes fnge outet. Coe suffix DD inictes fngeess outet. Screw Thre Aptors (Accessory Rnge) c c Prouct Coe 56 150 400 2ADP 83 150 400 3ADP 110 150 400 4ADP 160 150 400 6ADP 52 www.umscringe.co.uk

Hrmer Foor Drins Grtes n Bezes A rnge of Grtes n Bezes is vie to suit ifferent foor types n esthetic requirements. Grtes n Bezes re vie in stiness stee or nicke ronze. Soi pte grtes re so vie on request. Mchine stiness stee Mchine nicke ronze Trp Assemy When trppe rin is require, the Grte n Beze re suppie incusive of the Trp. The Trp consists of emounte funne n cp for ese of cening. Trp ssemy (See pge 56 for in-situ cross section) Grte n Beze Assemy 150mm Circur Grte 110 Grte n Beze Assemy Trp Prouct Coe Mchine Stiness Stee - without trp 150 140 BC150MS Mchine Stiness Stee - with trp 150 140 BC150MS/T Mchine Nicke Bronze - without trp 150 140 BC150MN Mchine Nicke Bronze - with trp 150 140 BC150MN/T Grte n Beze Assemy 150mm Squre Grte 110 Grte n Beze Assemy Trp Prouct Coe Mchine Stiness Stee - without trp 150 140 BS150MS Mchine Stiness Stee - with trp 150 140 BS150MS/T Mchine Nicke Bronze - without trp 150 140 BS150MN Mchine Nicke Bronze - with trp 150 140 BS150MN/T Grte n Beze Assemy 200mm Squre Grte Grte n Beze Assemy Trp Prouct Coe Mchine Stiness Stee - without trp 200 140 BS200MS Mchine Stiness Stee - with trp 200 140 BS200MS/T Mchine Nicke Bronze - without trp 200 140 BS200MN Mchine Nicke Bronze - with trp 200 140 BS200MN/T Grte n Beze Assemy 200mm Viny Sheet Grte Grte n Beze Assemy Trp Prouct Coe Mchine Stiness Stee - without trp 200 140 BCF200MS Mchine Stiness Stee - with trp 200 140 BCF200MS/T Mchine Nicke Bronze - without trp 200 140 BCF200MN Mchine Nicke Bronze - with trp 200 140 BCF200MN/T 54 www.umscringe.co.uk

Hrmer Foor Drins Drin Boies The Hrmer Foor Drin Boy is vie with vertic or horizont spigot connection. Versions with inets for connection from sink, th, shower wstes, etc, re n option. A four rin oy types wi ccept ny of the grte ssemy options (shown on pge 54), oth untrppe n trppe. Fuy Ajuste Drin Assemy Aows Grte to e turne in horizont pne Aows fine eveing justment in irections Foor rin ssemies Aows continuous precise justment for height Vertic Drin Boy Without Inets c c Prouct Coe 260 110 230 48 BVS100 Vertic Drin Boy With Inets c Prouct Coe 260 110 230 48 BVS100/A c Horizont Drin Boy Without Inets c Horizont Drin Boy With Inets c e e c e Prouct Coe 260 110 215 48 135 BHS100 c e Prouct Coe 260 110 215 48 135 BHS100/A For further informtion on Foor Drin refer to Hrmer Foor Drin technic iterture Aumsc Technic Hepine +44 (0) 1744 648400 55

Hrmer Shower Drins Vertic Spigot Outet Boy Pipe Di c Prouct (mm) Coe 38 200 115 43 DVS38 Be n Cmping Cor must e orere to compete the shower rin ssemy require. Outet is for use with fexie sheet foor finish. c 43 Where tie foor finish is require, use outet in comintion with Tie Grte Kit (see eow). Section igrm is shown with Be n Cmping Cor. Horizont Spigot Outet Boy Pipe Di c Prouct (mm) Coe 38 200 115 95 DHS38 c Be n Cmping Cor must e orere to compete the shower rin ssemy require. Outet is for use with fexie sheet foor finish. 43 Where tie foor finish is require, use outet in comintion with Tie Grte Kit (see eow). Section igrm is shown with Be n Cmping Cor. Be n Cmping Cor Type Coour Prouct Coe Dimpe finish (See note) CB38 Atro sfety finish (See note) CB38A Refer to Hrmer Shower Drin technic rochure for etis of RAL coours vie. Tie Grte Kit Auminium 150 200 138 150 200 Size Coour Grte Stye Prouct (mm) Coe 150 White (see note) Str Pttern DS150 200 White (see note) Str Pttern DS200 Refer to Hrmer Shower Drin technic rochure for etis of RAL coours vie. Pese stte coour on orer. Tie Grte Kit Nicke Bronze (Str grte) (Concentric grte) 138 138 150 150 150 150 200 200 200 200 Size Coour Grte Stye Prouct (mm) Coe 150 Nicke Bronze Str Pttern DS150/NB 200 Nicke Bronze Str Pttern DS200/NB 150 Nicke Bronze Concentric Ring DS150/NBC 200 Nicke Bronze Concentric Ring DS200/NBC Tie Grte Kit Mchine Stiness Stee 150 200 138 150 200 Size Coour Grte Stye Prouct (mm) Coe 150 Stiness Stee Str Pttern DS150/MS 200 Stiness Stee Str Pttern DS200/MS 58 www.umscringe.co.uk

Insttion: Shower Drins Typic Appiction Detis Pese refer to Hrmer Shower Drins technic iterture for etie informtion. Hrmer Shower Drin in suspene concrete foor with fexie sheet finish Atro fexie sheet fooring Drin e with co-orinte Atro fooring insert (Type CB38A) Cmping cor Neoprene O ring Wter se (50mm) 50mm scree to precst foor HARMER-SWIFT couping (for use with 50mm pipework) Seiment try Suspene ceiing Hrmer Shower Drin (DHS38) in suspene timer foor with tie finish, mchine stiness stee Tie Grte Kit Foor ties Cmping cor HARMER mchine stiness stee tie grte kit (Type DS150/MS) Neoprene O ring BAL WPI coting n memrne Wter se (50mm) Be (Type CB38) Foor joist HARMER-SWIFT couping (for use with 50mm pipework) Seiment try Psteror ceiing Aumsc Technic Hepine +44 (0) 1744 648400 59

Unergroun Dringe System The Hrmer MLK Unergroun Dringe System n the SML Aove-Groun Dringe System re fuy comptie n, use together, wi provie competey integrte soi n wste system for ny uiing project. Hrmer MLK Unergroun Dringe System Introuction The Hrmer MLK ringe pipe system ws eveope specificy for the ringe of ggressive wste wter ppictions. The Hrmer MLK system hs the ientic mteri specifiction of Hrmer SML n encpsutes the enefits of moern cst iron ut with ition coting protection. Quity Stnr Hrmer MLK meets the requirements of BS EN 877 n is mnufcture uner ISO 9001: 2000 Quity Mngement System (Cert. No.12 100 21864). Coting Specifiction The properties of Hrmer MLK cotings excee the requirements of BS EN 877 y fr. Pese contct Aumsc Technic Service for etis of chemic resistnce prmeters. Pipe Cotings Extern surfce nti-corrosive metic zinc secot with grey primer top yer. Coour: Grey Thickness: Metic zinc se cot 130 g/m 2 Epoxy primer top cot 60 µm Intern surfce two-prt epoxy ining Coour: Ochre Thickness: 200 240 µm (min. 200 µm) Fitting Cotings MLK fittings re interny n externy cote with grey two-prt epoxy coting, ip ppie to thickness of 200 µm. Size rnge Two-prt epoxy Cst iron Metic zinc se cot Epoxy primer top cot Hrmer MLK is vie in size rnge 50 200mm imeter with comprehensive rnge of fittings. Pese contct Aumsc for etis. Coupings For eow-groun connections, the Hrmer Terr Couping is recommene. This twin-screw stiness stee couping is vie in gre 304 s stnr or gre 316 for hostie environments. Appice Stnrs BS EN12056: 2000, Grvity ringe within uiings. BS EN752: Dringe Systems outsie uiings. For further etis on the ppiction of Hrmer MLK, pese contct Aumsc Technic Service. 60 www.umscringe.co.uk

Other Hrmer Dringe Proucts In ition to the SML System, n the comptie Roof Outets, Foor Outets, Shower Drins n MLK System, Aumsc so offers vriety of other ringe proucts, five of which re shown eow. Hrmer LCC Hrmer LCC is trition sockete cst iron pipe n fittings system mnufcture to origin imperi imensions. It hs een crete specificy for use in uiing refurishment n historic uiing contrcts where there is nee to fithfuy reprouce perio eti. An extensive rnge of fittings n ccessories provies gret fexiiity in insttion, whie speci etiing requirements cn e ctere for through Aumsc's friction n pttern mking workshops. Hrmer Kesse Hrmer Kesse is the Aumsc offer for speciist ringe. Kesse pstic ringe systems re se on mour rnges of components which cn e comine in ifferent formts to provie hevy uty ringe soutions for wie rnge of ppictions, y the incorportion of ckfow vves, utomtic pumps n suge uckets. Hrmer Kesse rins so incorporte of the esign vntges ssocite with Hrmer Foor Outets pus the economies of pstics in use with stiness stee. Hrmer Mouock Mouock is support system for rooftop pving n ecking to provie fuy concee rooftop ringe. It is fuy engineere peest system cpe of proviing eve eck over soping sustrte, or support for wtertight rise foor. Mouock LCC Hrmer Lineris Lineris shower ringe rnge removes the nee for convention shower try n offers choice of innovtive simine ringe chnnes ong with more trition shower guy proucts, ut with contemporry stying tht wi compement ny shower or wet room. Kesse Hrmer Uni-Ring Uni-Ring is verstie n economic ft isc support system for rooftop pving n ecking to provie fuy concee rooftop ringe. Once inste, pving n ecking cn e esiy ifte for simpe inspection of ringe outets n for sustructure mintennce. Lineris Uni-Ring Aumsc Technic Hepine +44 (0) 1744 648400 61

Aumsc Premium Proucts Aumsc provies n unrive rnge of premium proucts for uiing exteriors n ringe, ong with high eves of technic expertise n project support. Our weth of experience, soey eicte to construction proucts, comine with networks of pprove insters, merchnt stockists n choice of wrrnty options ensures we provie pproprite prouct n system soutions for types of uiings. Rinwter Rinwter coection y esign: compete rnge of engineere soutions to compement oth contemporry n trition rchitecture in uminium n cst iron. www.umscrinwter.co.uk Dringe Hrmer ringe soutions from proucts n systems renowne for engineering integrity. Incues cst iron soi n wste systems n unitry ringe. www.umscringe.co.uk Wterproofing A comintion of wor css rns Derigum ft roofing n Hyrotech structur wterproofing - mrket eers in their respective fies. www.umscwterproofing.co.uk Green Roofs ZinCo green roofs - mrket eers in Europe for over 40 yers with Bioiverse, Extensive, Intensive & Semi-Intensive roof specifiction options. www.umscgreenroof.co.uk Met Roofing A synthesis of engineering n esthetics proviing rchitectury powerfu roofing soutions with the Armsem stning sem system n Skyine fsci/soffits. www.umscmetroofing.co.uk Fçes Extern w insution n rener soutions for the 21st century, comining esthetic virncy with ong term wether protection n therm performnce. www.umscfces.co.uk 62 www.umscringe.co.uk

Proven Project Trck Recor Centrium House, Woking This nmrk uiing s curve fçes n strikingy o coours mke istinctive sttement in the town centre. Aumsc s Swistherm ightweight, insute rener system met the project s esthetic n therm performnce criteri in cost-effective pckge. The system hs so crete fçe tht requires minim mintinnce, is highy resistnt to impct mge yet esiy repire if necessry, n is fuy wether resistnt whist remining vpour permee. New Provience Whrf n Ontrio Tower, Lonon A rmtic, futuristic ition to Lonon s skyine, this mixe-use urn vige of prtments, offices, reti n eisure spces n hote tower, is interwoven with compex of green roofs, wter fetures (incuing cn) n poiums. To meet the technic n esthetic emns of this iverse construction project, three premium Aumsc proucts were use: ZinCo ioiverse n intensive green roofs, Hyrotech structur wterproofing n Derigum wterproofing memrne. Lncshire Schoos Aumsc provie the components n technoogic expertise neee to chieve the vnce wveform met roof which gives this new sports h (one of three, serving schoos in the re) its istinctive ppernce. The rmtic curvture hs een quicky n economicy chieve y using the Armsem zip-up uminium roofing system (so vie in copper, stiness stee or zinc) with Aumsc rinwter goos n Skyine fscis n soffits. Aumsc Technic Hepine +44 (0) 1744 648400 63