Combine harvesters CROP TIGER 40 30
Threshing system and engine. Efficient drive power: TATA engine (emissions standard BS III) with up to 76 hp and high reserves of torque thanks to greater power at low revs. Engine with low maintenance costs, longer service life, economical fuel consumption and outstanding service. 2
Threshing system and engine Threshing system Rice rotor specially developed for difficult field conditions. Multicrop capability The Tangential Axial Flow technology allows the machine to harvest an extremely wide range of crops. This means that it can operate for longer during the harvest period. TANGENTIAL AXIAL FLOW (TAF) threshing system: The TAF threshing system avoids losses during the threshing process and delivers clean, undamaged grain, even in wet conditions or when harvesting a green crop. Suitable for harvesting many different crops, including wheat, rice, maize, sunflowers, soybeans, beans and mustard, it allows the combine to be used for a wide range of applications. Advanced function management. The user-friendly instrument panel with a fuel level indicator makes the operator's task easier. 3
CROP TIGER 40. 1 Canopy: The large canopy offers maximum operator comfort. Highquality fibre material makes for a long service life. 2 Cutterbar: 3.20 m wide single knife bar with double fingers for reliable cutting quality in wet conditions. Standard-fit crop lifters for laid crops ensure loss-free harvesting. Also fitted as standard are crop dividers for a clean crop edge. 3 Grain tank cover: The increased capacity of 1700 l ensures longer operating times while the grain tank cover means that it is possible to work in all weather conditions. The grain tank is protected during the off-season and remains closed during operation. The opening window at the top makes it easy to maintain and monitor from the outside. 4 Fast and clean offloading system: A user-friendly grain tank discharge auger tube with a universal joint is suitable for discharging straight into sacks without any grain wastage. The high discharging capacity of 30 l/s makes for short offloading times and enhances efficiency. 4
CROP TIGER 40 Excellent visibility Improved monitoring of the crop flow in the cutterbar, especially under difficult conditions A cut above 400 mm ground clearance 5 Highly manoeuvrable: Equipped with 14.9-28 tyres on the front axle and 7.5-16 on the rear axle for excellent manoeuvrability, especially in small fields. Multicrop capability Easy conversion for different crop types Allows machine to be used for wide variety of applications Maintenance panels Easy access 5
CROP TIGER 40 TERRA TRAC. 1 Canopy: The large, high-quality canopy offers the operator optimal comfort. High-quality fibre material makes for a long service life. 2 Cutterbar: 2.10 m wide with dual knives for outstanding results in rice. The five-point reel and large feeder ensure a very high crop intake. Crop dividers for retrofitting are available as replacement parts from CLAAS. 3 Grain tank cover: The increased capacity of 1500 l ensures longer operating times while the grain tank cover means that it is possible to work in all weather conditions. The grain tank is protected during the off-season and remains closed during operation. The opening window at the top makes it easy to maintain and monitor from the outside. 4 Fast and clean offloading system: A user-friendly grain tank discharge auger tube with a universal joint is suitable for discharging straight into sacks without any grain wastage. The high discharging capacity of 30 l/s makes for short offloading times and enhances efficiency. 6
CROP TIGER 40 TERRA TRAC Battery isolator switch. Extends the service life of the battery when machine is not in use Easily accessible Air compressor Integrated in the engine Air reservoir 10 l / 8 bar 5 Rubber tracks for use in wet rice paddies: Imported transmission and rubber tracks for increased reliability and outstanding handling as well as easy manoeuvrability on soft, marshy soil. Water filter Filters water out of the fuel Improves engine performance Reduces downtime New air filter Larger capacity Longer service intervals Greater comfort 7
CROP TIGER 30. 1 Canopy: The large, high-quality canopy offers the operator optimal comfort. 2 Cutterbar: 2.60 m wide single knife bar with double fingers for reliable cutting quality in wet conditions. Large reel and large cutterbar trough ensure excellent crop take-up. Angled reel tines allow laid crops such as basmati rice, soybeans and chickpeas to be lifted. The permanently attached cutterbar makes it possible to change fields quickly without the need for any conversion. 3 Grain tank with large capacity: Increased capacity of 1500 l enables longer operating times. 4 Fast and clean offloading system: A user-friendly grain tank discharge auger tube with a universal joint is suitable for discharging straight into sacks without any grain wastage. The high discharging capacity of 30 l/s makes for short offloading times and enhances efficiency. 5 Highly manoeuvrable: Equipped with 13.6-28 tyres on the front axle and 7.5-16 on the rear axle for excellent manoeuvrability, especially in small fields. 8
CROP TIGER 30 Excellent visibility Improved monitoring of the crop flow in the cutterbar, especially under difficult conditions A cut above 400 mm ground clearance Multicrop capability Easy conversion for different crop types Allows machine to be used for wide variety of applications Maintenance panels Easy access 9
CROP TIGER 30 TERRA TRAC. 1 Canopy: The large, high-quality canopy offers the operator optimal comfort. 2 Cutterbar: 2.10 m wide with dual knives for outstanding results in rice. The five-point reel and large feeder ensure a very high crop intake. Crop dividers for retrofitting are available as replacement parts from CLAAS. 3 Overload protection: The reel drive is equipped with a friction clutch as standard. In this way, downtime and repair costs can be kept to a minimum. 4 Grain tank with large capacity: The increased capacity of 1500 l ensures longer operating times. 10
CROP TIGER 30 TERRA TRAC Even loading Reel height can be adjusted hydraulically for different crop types and conditions Improved running characteristics Even weight distribution Maximum traction 5 Fast and clean offloading system: A user-friendly grain tank discharge auger tube with a universal joint is suitable for discharging straight into sacks without any grain wastage. The high discharging capacity of 30 l/s makes for short offloading times and enhances efficiency. 6 Rubber tracks for use in wet rice paddies: Imported transmission and rubber tracks for increased reliability and outstanding handling as well as easy manoeuvrability on soft, marshy soil. Protected drives Long service life of belt drives Reliable anti-wrapping system for long straw Straw management Long straw falls out to the side and can be picked up in a second process Short straw is ejected to the rear 11
Mid-Version. 1 Flexible grain tank discharging: The Mid-Version variant increases productivity while also offering greater comfort and convenience. The discharge height of 4280 mm at the discharge auger tube means that it is possible to offload onto larger trailers with ease. The discharge reach of 3480 mm also helps to overcome large distances. Discharging straight into sacks is also possible, as the discharge auger tube can still be lowered to ground level. 2 Raised chassis for greater ground clearance: With its increased chassis height of 575 mm, the CROP TIGER offers very high ground clearance which ensures reliable operation, even when the ground conditions are muddy or when obstacles are encountered. One-handed operation of the steering makes for maximum operator comfort. 3 Maize kit: An even wider range of applications is opened up by the maize kit comprising a different concave, which can also be used for soybeans, a different belt pulley with a corresponding belt to reduce the speed, and the conversion kit for the sieve pan and feeder housing. 12
Mid-Version Flexible grain tank discharging Extremely high discharge heights are possible with the adjustable grain tank discharge auger tube. Sack filling Discharging straight into sacks is easy thanks to the adjustable auger tube. 4 Digital displays: The digital display combines the indicators for the fuel level, engine temperature, engine oil pressure and operating hours counter. Long reach Thanks to the long reach, discharging can also be carried out over ditches and fences without any difficulty. Ground clearance 1500 mm more ground clearance than the standard version for reliable operation even when the ground conditions are muddy or when obstacles are encountered. 13
Technical data. CROP TIGER 40 40 TERRA TRAC Engine Manufacturer TATA 497 TCIC (turbo intercooler) 4-cylinder, 4-stroke, water-cooled Maximum output hp/rpm 76/2200 76/2200 Fuel tank capacity l 100 100 Emissions standard BSIII BSIII Grain tank Capacity l 1700 1500 Discharge rate (universal joint with fast discharging) l/s 30 30 Turret auger TATA 497 TCIC (turbo intercooler) 4-cylinder, 4-stroke, water-cooled Crop cleaning Fan Forced-circulation cleaning fan Forced-circulation cleaning fan 2 speeds rpm 1200 and 1500, controlled via cover flap Total sieve area (upper and lower sieves) m 2 1.24 1.24 1200 and 1500, controlled via cover flap Tyres Front 14.9-28 Rear 7.50-16 Tracks (suitable for wet soil) Bridgestone all-rubber tracks Cutterbar Compatible cutterbar widths mm (ft) 3200 (10.5) 2100 (7) / 2600 Threshing system TANGENTIAL AXIAL FLOW (TAF) Threshing and separation rotor (diameter) mm 450 450 Threshing width mm 560 560 Separation width mm 1240 1240 Threshing drum speed rpm 500-1282 500-1282 Dimensions Weights kg 5080 4520 With turret auger kg 4370 Length (with cutterbar) mm 6555 5095 Width mm 2800 2585 Height mm 3660 2877 Ground clearance mm 400 Frame: 425 / 575 Hydraulic ground drive: 240 As CLAAS continually develops its products to meet customers' requirements, all products are subject to change without notice. All descriptions and specifications in this brochure should be considered approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for worldwide use. Please consult your nearest CLAAS dealer and their price list for local specification details. Some protective panels may have been removed for photographic purposes in order to present the function clearly. To avoid hazards, never remove these protective panels yourself. Please refer to the relevant instructions in the operator's manual in this regard. All technical specifications relating to engines are based on the European emission regulation standards: Stage. Any reference to the Tier standards in this document is intended solely for information purposes and ease of understanding. It does not imply approval for regions in which emissions are regulated by Tier. 14
Technical data CROP TIGER 30 30 TERRA TRAC Engine Manufacturer TATA 4SP TCIC 4-cylinder, 4-stroke, water-cooled Maximum output hp/rpm 62/2200 60/2800 Fuel tank capacity l 100 100 Emissions standard BSIII BSII Grain tank Capacity l 1500 1200 Discharge rate (universal joint with fast discharging) l/s 30 20 TATA 4SP RTV 4-cylinder, 4-stroke, water-cooled Crop cleaning Fan Forced-circulation cleaning fan Forced-circulation cleaning fan 2 speeds rpm 1200 and 1500, controlled via cover flap Total sieve area (upper and lower sieves) m 2 1.24 1.24 1200 and 1500, controlled via cover flap Tyres Front 13.6-28 Rear 7.50-16 Tracks (suitable for wet soil) Bridgestone all-rubber tracks Cutterbar Compatible cutterbar widths mm (ft) 2600 (8.5) 2100 (7) / 2600 Threshing system TANGENTIAL AXIAL FLOW (TAF) Threshing and separation rotor (diameter) mm 450 450 Threshing width mm 560 560 Threshing width mm 1240 1240 Threshing drum speed rpm 500-1282 500-1282 Dimensions Weights kg 4700 4770 With turret auger kg 4420 Length (with cutterbar) mm 6520 5095 Width of mm 2925 2585 Height mm 3500 2877 Ground clearance mm 400 Frame: 425 / 575 Hydraulic ground drive: 240 Standard Option Not available FIRST CLAAS SERVICE The reliable CLAAS Service Network ensures the fast supply of parts and assistance in the event of damage. 15
CLAAS KGaA mbh Postfach 1163 33416 Harsewinkel Deutschland Tel. +49 5247 12-0 claas.com 131012000316 KK DC 0316 / 00 0259 818 1