Pipeline Equipment HEROchem ek Friedensstr. 15 D-77694 Kehl/Rh. Tel.: +49 7851 48.11.55 Fax: +49 7851 95.97.63 info@herochem2000.com
OVERVIEW Pig Traps Quick closure Insulating Joints Tees Split Tees Gate Valves Ball Valve HKSF-W100 Ball Valve HKSF Ball Valve HKSF-SB Ball Valve HKSF-PE
PRODUCT OVERWIEV
BALL VALVES HKSF-W100 HKSF-SB HKSF-FW HKSF-PE
BALL VALVE: TYPE HKSF-W 100 Construction Sectional drawing Fire Safe Test Workshop Pictures Pictures
CONSTRUCTION HKSF-W 100 Anti Blow Out Stem Sealing system: primary metal sealing secondary soft sealing Trunnion mounted Fully welded Double Piston Single Piston Double Block And Bleed
FULLY WELDED HKSF-W 100 RMA-ball valves type HKSF-W are fully welded and completely maintenance-free designed.
TRUNNION MOUNTED HKSF-W 100 RMA-ball valves are trunnion mounted with maintenance-free bearings in all sizes (DN 50 and greater) and all pressure ratings The precision machining and special low friction bearings ensure minimum wear. These low torque levels are also an advantage when dimension gears, electrical, pneumatic or hydraulic actuators.
SPINDLE/SEALING - ANTI-BLOW-OUT HKSF The Anti-Blow-Out - design prevents the spindle from being blown out by te medium transported or pulled out by the user himself. The special double-screw design enables, on the one hand, correct squeezing or adjustment of the steel, PTFE and graphite sealing system manufactured by RMA and, on the other hand, rapid replacement of sealing rings under full operating pressure 1. Threaded pin 2. Cylinder screw 3. Spacer ring (13% chrome steel) 4. Graphite ring 5. Tension ring (13% chrome steel) 6. Lip sealing ring (PTFE) 7. Groove tension ring (13% chrome steel) 8. Fastening ring 9. O-ring (Viton) 10. O-ring (Viton) 11. Clamping ring (13% chrome steel) 12. Stopping ring 13. Operating spindle (13% chrome steel) 14. Gear plate
SEALING SYSTEM HKSF-W 100 The sealing system is primarily metallically, secondarily softly The soft sealing is located flexible in the seating ring chamber. This ensures a primary active metallic sealing. Ball: Double hartchromium First layer: tight coating Second layer: hard coating Seat rings: Stainless steel Ideal material combination for metal to metal sealing (passed successfuly the RUHRGAS Test ) In case of wear, the soft sealing can readjust itself It is pressed on by the o-ring and by the line pressure
DOUBLE PISTON HKSF-W 100 In the double piston-system the seals and seating rings on the inlet and outlet side provide total sealing of the body inner chamber in both end positions of the ball valve. The ball valve provides sealing on the inlet and outlet sides. In this way, it is also possible to provide proof of sealing by pressurisation from outside the body. We recommend the double piston -system for all gaseous media. This system offers protection in two respects to the user.
SINGLE PISTON HKSF-W 100 In the single piston-system the sealing ring on the outlet side raises when a pre-defined overpressure is present inside the valve body allowing this excess pressure to escape to the outlet side. The lack of pressure within the body provides proof of sealing. We recommend the single piston-system for all liquid media. This system prevents damage to the body caused by excessive overpressure through thermal expansion. In this way, additional external pressure-relieve is not necessary.
DOUBLE BLOCK AND BLEED HKSF-W 100 Proof of sealing is provided in both end positions, even under maximum operating pressure of the ball valve, using a special, self-protected nipple or, if required, using drain and vent pipes with an additional ball valve.
PICTURES Ball grinding machine
PICTURES
PICTURES Shrunken operating spindle Ball before installation
PICTURES Body before installation Ball installed
PICTURES Machining of the bearing area Submerged arc welding of the final seam
PICTURES Universal testing machine Pendulum striking mechanism
PICTURES
FIRE SAFE TEST
PICTURES
PICTURES
BALL VALVE: TYPE HKSF-SB Sectional drawing Pictures
PICTURES HKSF-SB Top part of the housing Middle part of the housing
PICTURES HKSF-SB Pressure test Complete housing
PICTURES HKSF-SB Ball valve with actuator
GATE VALVES Conduit Gate Valve ASR Rotary Gate Valve DSR Wedge Gate Valve KSR
SCRAPER TRAPS AND QUICK CLOSURES Scraper traps Quick Closures
QUICK OPENING CLOSURE WITH SAFETY SYSTEM 1. Automatic locking device 2. Locking bolt 3. Vent ball valve 4. Security notch Safety system in closed position Safety system in open position
MONOBLOC INSULATING JOINTS: TYPE IK Features: Diameter: ½ up to 102 inch; pressure class: ANSI 150 up to ANSI 2500 Medium: gas, oil, multi-products, water, hot-water, O Standard Material: Pipe pugs: API 5L Gr. B up to API 5L X 70 Forgings: ASTM A 105 up to ASTM A 694 Gr. F 65 Insulating ring: NEMA X up to NEMA G 10/11 depending on medium, pressure, temperature Seals: NBR according to ASTM D 735 or FPM according to ASTM D 2000 Filling material: Epoxy resin, silicone Outside coating: Polyurethane, hot airless spray, 1,5-2,5 mm for underground installation, epoxy coating for above ground installation Inside lining: Epoxy Other materials, such as SS steel, Duplex etc. on request. Standard Tests: Pressure test 1,5 x design pressure Dielectric test 5000V Butt welds x-rayed, closing seam and weld ends ultrasonic tested
Insulating Joint with External Lightning Arester (spark gap)
VALVE GROUP
BALL VALVE: TYPE HKSF-W100
BALL VALVE: TYPE HKSF-W100
BALL VALVE: TYPE HKSF-PE
INSULATING JOINTS: TYPE IK
INSULATING JOINTS: TYPE IK with PUR
SPLIT TEES
SCRAPER TRAPS
QUICK CLOSURE
REFERENCES NIGC
Pipeline Equipment HEROchem ek Friedensstr. 15 D-77694 Kehl/Rh. Tel.: +49 7851 48.11.55 Fax: +49 7851 95.97.63 info@herochem2000.com Thank you very much for your attention!