Stainless Steel Mill Products

Stainless Steel Mill Products Angle, Pipe, Rod, Bar, Sheet, Plate, Coil, Tubing and Wire ALASKAN COPPER & BRASS COMPANY

History W hen Alaskan Copper Works was founded as a marine coppersmithing company in 9, one of its major activities was forming and brazing pipe and pipe fittings made from copper, brass and bronze, primarily for use in the Pacific Northwest shipbuilding industry. Beginning in the 920 s, many of the area s growing process industries, such as pulp and paper, which had relied on wood stave and cast iron as corrosion resistant materials for their tanks and piping, welcomed the development of a new weldable alloy, silicon bronze. This alloy had special advantages in weight, cost and corrosion resistance. Alaskan Copper Works participated in the transition to this innovative metal and in the development of the welding techniques necessary for its proper fabrication. In the 90 s, alloys with even better corrosion resistance, such as the austenitic stainless steels, became available and quickly came into general use not only in the pulp and paper industry but also in the other process industries then beginning to develop, such as Alaskan Copper Works yesterday petrochemical and food processing. Again, Alaskan Copper Works participated in the application of these new, advantageous materials and in the development of the welding and fabricating procedures required to maximize their usefulness. Over the intervening years, improvements in our manufacturing capacities have seen the standard lengths of most pipe sizes increase from 4 feet to 0 feet and then to 20 feet. Dieformed smooth-flow elbows began to be made in small sizes and gradually advanced to include larger sizes and many radii and wall thicknesses. Other advances over the years have led to tees being made with smooth-drawn outlets, the development of many available choices in the types of stub ends for different services and our manufacturing of pipe and fittings to advanced specifications and in exotic alloys, including our qualification to produce fittings for the nuclear power industry. As a result, today s customers of the Stainless Products Division of Alaskan Copper Works benefit from the accumulated experience of one of the nation s largest organizations devoted exclusively to the manufacturing of pipe and pipe fittings in stainless steels, high-nickel alloys, duplex stainless alloys, copper-nickel alloys, aluminum, titanium, zirconium, copper and other weldable corrosion resistant alloys. Alasan Copper Works today.

Your Source for Corrosion Resistant Alloys Alaskan Copper & Brass Company combines the largest and most diverse inventory of alloys in the Pacific Northwest with the very latest in material processing equipment. Our goal is to continue to be a true service center for our customers. We provide accurate, rapid quotation services and the ability to deliver material on time, preprocessed if necessary to our customer s exact specifications. Northwest Owned and Operated Alaskan Copper & Brass Company has been owned and operated by the same family since 9. In our Seattle, Portland and Canadian distribution facilities, the emphasis has always been on personal service and long term relationships with our customers. Contract terms, credit terms and special stocking programs can be negotiated locally, with people who understand the Northwest market and its customers. State of the Art Processing Equipment Preprocessing of customer material has become more important every year due to more exacting quality requirements in most industries. Alaskan has responded to that demand by investing heavily in new processing equipment. Minimize scrap and save inventory costs! Let Alaskan do your material processing. Customer Service our Specialty Our sales staff is backed up by one of the most extensive information systems in the metals industry. Each salesperson has instantaneous access to all of our over,000 stocking items through a touch-input computer screen. Questions regarding the status of your order can be answered immediately, without a return call. We value your time as much as you do. This catalog covers sizes, weights and specifications of material for the commercial, military, marine, waste-water, petro-chemical, pharmaceutical, beverage and power industries. Call one of our informed and experienced salespeople for the rapid quotation response you expect in these competitive times. ALASKAN COPPER & BRASS COMPANY P.O. Box 067 P.O. Box 46 22 North Road Portland, Oregon 97208-067 Seattle, Washington 9824-46 Coquitlam, B.C. VK V7 2440 Southeast Raymond (97202-468) 22 Sixth Avenue South (984-20) Canada (0) 28-77 (206) 62-800 (604) 97-6620 Fax: (0) 28-6849 Fax: (206) 82-7 Fax: (604) 97-088 Toll Free: (800) 2-766 Toll Free: (800) 2-766 Toll Free: (800) 667-46 E-MAIL: acbpdx@alaskancopper.com E-MAIL: acbsea@alaskancopper.com E-MAIL: acbvcr@alaskancopper.com

ALASKAN COPPER PROCESSING CAPABILITIES Coil Processing Aluminum, brass, copper, copper-nickel and stainless steel coil stock from.00 through thick and up to 96 wide are levelled and cut to length on Alaskan s custom-made line. Shearing Precision shearing from light gauge to thick copper alloy material, thick stainless steel and up to thick aluminum. Sheet or plate can be sheared in 20 foot continuous lengths using an adjustable backgauge. Plate up to thick can be sheared in lengths up to 48. Alaskan s Cut-To-Length facility allows for efficient use of sheet and plate material. Sawing Abrasive sawing of copper alloy material and stainless steel though 4 thick to close tolerance for rectangles and squares. Metal carbide sawing of aluminum plate through 6 thick. Plate up to 96 x 68 can be sawed in full lengths. Plate up to 2 foot long can be sawed with a +/-.00 inch tolerance. Splice Welding Simultaneous welding from both sides by automatic gas tungsten-arc process to achieve any required sheet size from stock material. The weld procedures and welder qualifications conform to Section IX of the ASME Boiler and Pressure Vessel Code. The resulting weld has minimum distortion and minimum reinforcement to allow easy forming such as rolling. Material up to 20 feet in length may be welded together. Order the size that is needed, not just standard sizes. Plasma Burning Computerized automatic plasma burning of any shape can be accomplished. All corrosion resistant alloys can be cut up to thick. Up to 96 x 240 material can be accommodated. A water table is utilized to keep slag and the heat affected zone to a minimum. Do-All Sawing Automatic multiple cutting up to 6 by 6 bar or 6 diameter round bar, rod or tubing. Complex shapes are cut by computerized plasma cutting tables. Aluminum wet pump pressure vessel used to transfer fish from a ship s hold to the dock. Custom Fabrication Custom fabrication of most industrial shapes can be performed by our affiliated company, ALASKAN COPPER WORKS. Work will be performed on a complete package basis including material or on a labor only basis utilizing the customer s material. The entire engineering and drafting department of ALASKAN COPPER WORKS is at your disposal, offering computerized design of heat transfer equipment, pressure vessels and tanks. 2

Table Showing Fractions, Decimals, Centimeters & Millimeters / 6 / 6 / 6 7 / 6 Fractional Inch 7 9 7 9 7 9 2 2 2 27 29 Decimal Inch Centimeters Millimeters Millimeters Centimeters Decimal Inch.06.096.969.0969.0.6.02.0792.798.498.0..0469.9.906.8906.89.469.062.88.87 4.287.429.62.078.984.9844 4.6844.468.78.098.28 2.8.08.08.98.094.2779 2.778.478.48.6094.2.7.70.870.88.62.406.7.79 6.279.627.6406.6.970.9688 6.6688.667.66.79.466 4.66 7.066.707.679.87.476 4.762 7.462.746.687.20.9.94 7.894.786.70.288.8.6 8.26.826.788.244.94.9 8.6.86.744.20.60 6.00 9.000.90.70.266.6746 6.7469 9.4469.94.766.28.74 7.48 9.848.984.782.2969.74 7.406 20.2406 2.024.7969.2.798 7.97 20.67 2.064.82.28.84 8.44 2.044 2.0.828.48.87 8.7 2.4 2.4.848.94.929 9.28 2.828 2.8.894.7.92 9.20 22.220 2.22.87.906.992 9.929 22.629 2.262.8906.406.02 0.88 2.088 2.02.906.429.072 0.76 2.46 2.42.929.47..2 2.82 2.8.97.4..094 24.2094 2.42.9.4688.9.906 24.606 2.46.9688.4844.20 2.0 2.00 2.00.9844.00.270 2.7000 2.4000 2.40.000 Fractional Inch 7 7 9 9 4 2 4 4 2 47 49 2 27 7 29 9 6 6 9 / 6 / 6 / 6 7

Stainless Steel Mill Products Stainless Steel Angle Even Leg & Uneven Leg Angle... 6 Stainless Steel Pipe Comparison of Wall Thicknesses... 7-8 Annealed Welded & Seamless Pipe... 9-0 As Welded Pipe & Tubing... - Stainless Steel Rod & Bar Flat Bar... 4- Hexagon Bar... Square Bar... 6 Round Rod... 7-9 All-Thread Rod... 20 HRAP Channel...2 T-04/04L Structural Tee- Bar...22 T-04 Wide Flange I-Beam...2 T-04L Tapered Standard I-Beam...24 Stainless Steel Sheet, Plate & Coil T-04 2B... 2-26 T-04 #4... 27-28 T-04 #8 (Mirror)... 29 T-04 # HRAP... 0 T-04-L... T-04-L # HRAP... 2 T-04-L 2B... T-6-L 2B... 4- T-6-L # HRAP... 6-7 T-7-L # HRAP... 7 T-7-L 2B... 7 T-04 HRAP Tread Plate... 8 T-04 Flattened and Expanded Sheet... 8 T-04 Rigidized Sheet Oxford Pattern Textured... 8 T-02 Full Hard Shim Stock... 9 Stainless Steel Stainless Steel Tubing Annealed Welded & Seamless Tubing... 40-4 Round Ornamental Tubing... 42 Rectangular Ornamental Tubing... 4 Square Ornamental Tubing... 44 Stainless Steel Wire Stainless Steel Wire... 4 Stainless Steel Wire Cloth... 4 Stainless Steel Fasteners Continuous Hinge... 46 4

Stainless Steel 00 Series Comparison Guide, Typical Analysis T-04 Element Percent Advantages Applications Carbon Manganese Silicon Chromium Nickel 0.06%.00% 0.0% 9.00% 9.2% Simple to fabricate and clean Good corrosion resistance Economical maintenance Bright, smooth appearance Optimum strength-to-weight ratio Formability High tensile strength Stainless steel sinks Milk holding tanks Brewing and distilling Food and chemical processing Stainless flatware Vacuum bottle liners Pressure vessels for chemicals plants Nuclear plant storage tanks T-04-L Element Percent Advantages Applications Carbon Manganese Silicon Chromium Nickel.02%.00% 0.0% 9.00% 0.00% Resists intergranular corrosion High corrosion resistance Easy to clean, fabricate High strength-to-weight ratio Controls product contamination Dimple-sheet fabrication of tanks Vessels for thermal transfer Nitrogen fertilizer towers T-6 Element Percent Advantages Applications Carbon Manganese Silicon Chromium Nickel Molybdenum.02%.00% 0.0% 9.00%.00%.0% Corrosion, heat resistant, Easy maintenance Close tolerances Deep drawing Superior creep strength Good piting resistance Chemical storage tanks Pressure vessels Trays in distillation towers Components for pens Marine, chemical environments T-6-L Element Percent Advantages Applications Carbon Manganese Silicon Chromium Nickel Molybdenum.02%.00% 0.0% 7.00% 2.00% 2.0% Deep drawing ability Close tolerances Good creep strength Easy to maintain Superior intergranular Corrosion resistance Tanks, piping and valves Food processing tanks Pails, containers, dicers Tank trucks Conveyors Panel walls T-7-L Element Percent Advantages Applications Carbon Manganese Silicon Chromium Nickel Molybdenum.02%.00% 0.0% 9.00%.00%.0% Excellent corrosion resistance Minimizes metallic contamination High creep and tensile strength High stress-to-rupture strength Storage tanks for corrosive materials

Stainless Steel Angle Stainless Steel Angle - Even Leg and Uneven Leg Hot Rolled, Annealed, and Pickled Specifications: ASTM A 276 Stocked in 20 to 22 foot random lengths Size Ft T-04/L Part T-6-L Part Size Ft T-04/L Part T-6-L Part x x.400 696047 7069 6 x x 7.400 66966 676 x x.90 609 6477 6 x 4 x 8.00 680 688890 x x.800 67 64 6 x 6 x 9.800 7082 x x.00 67 69 2 x 2 x 4.800 409 400 x x.20 68 228878 2 x 2 x.900 4422 426 2 x 2 x.60 722 228860 x x 7.200 44 40 x x / 6.60 772 76 x x 8.60 6707 67089 x x / 6.480 780 80 4 x x 8.00 6878 6886 x x / 6.800 84 8 x x 9.80 6472 6466 2 x 2 x / 6 2.440 8 887 6 x x.00 64906 67269 2 x 2 x / 6.070 89 4077 4 x 4 x 9.800 468 22886 x x / 6.70 48 669870 x x 2.00 6649 66940 x x.490 900 22882 6 x 4 x 2.400 6748 6764 x x.920 94 48977 6 x 6 x 4.900 6672 6700 x x 2.40 942 976 8 x 8 x 20.00 702987 2 x x 2.400 649294 6728 x x 9.400 48897 4898 2 x 2 x.90 984 40 4 x x 2.200 672970 2 x 2 x 4.00 4029 404 4 x 4 x 2.800 4668 6678 x x.600 68968 70076 x x 6.200 67660 67678 x 2 x 4.00 2229 620 6 x 4 x 6.200 67429 6747 x x 4.900 40 4079 6 x 6 x 9.600 646602 64660 x x.880 82 66999 8 x 8 x 26.00 69967 4 x x.800 084 64067 4 x 4 x 6.600 4087 228844 x x 6.600 676 67849 x x 8.00 70804 6

Stainless Steel Pipe Annealed Welded and Seamless Comparison of Wall Thicknesses Alloys Stocked Include Types 04-L and 6-L. Other corrosion resistant alloys are available. Specifications: ASTM A 2 Stocked in 7-24 foot random mill lengths, plain ends. Annealed pipe is used when the specifications referenced are required and is available only in the NPS diameters and schedule wall thickness shown. Welded annealed pipe is available per ASTM A 2, ASME SA-2 and ASTM A 8, A 76, A 409 and MIL-P-2469 (corrosion tested) and is stocked in most sizes through 24" diameter. Seamless "annealed" pipe is available per ASTM A 2 and MIL-P-2469 (corrosion tested) and is stocked through 4" size. Nominal Pipe Size Outside Diameter Sch s ft Sch 0s Ft Sch 40s Ft.40.049.9.068.2.09.2 Sch 80s Ft Sch 60 Ft XX Strong Ft.40.06..088.40.9.0.67.06.4.09.8.26.76.840.06..08.69.09.87.47..87..294.8.00.06.70.08.88..2.4..28 2.0.08 2...06.88.09.4..7.79 2.2.20 2.9.8.7.660.06..09.8.40 2..9..20.9.82..900.06..09 2..4 2.8.200.7.28.0.400 6.6 2 2.06.6.09 2.7.4.7.28..4 7.6.46 9.2 2 2 7.08 2..20.6.20.9.276 7.8.7 0.2.2 4.0.08..20 4.4.26 7.8.00 0..48 4.7.600 9.0 4.08.6.20..226 9..8 2.8.66 2.4 4 4.08 4.0.20.7.27.0.7.. 2.0.674 28.2 9 / 6.09 6..4 8.0.28.0.7 2..62.7.70 9. 6 6.09 7.8.4 9..280 9.4.42 29.2.79 46.4.864 4.4 8 8.09 0..48.7.22 29.2.00 44.4.906 76..87 74. 0 0.4.6.6 9..6 4.4.00 6.0.2 8.00 07 2 2.6 2..80 24.7.7 0.7.00 67.0.2 64.00 28 4.6 2.6.88 28.4.7.9.00 7.8 6.6 28.6.88 2..7 64..00 84.7 8.6 2.2.88 6.6.7 72..00 9.7 20.88 40.7.28 47..7 80..00 07 22.88 44.8.28.9.7 88.7.00 8 24.28 6.7.20 64.9.7 96.9.00 28 26.7 0.00 9 28.7.00 0 0.20 8..2 0.7 2.00 6 2.7 0.00 72 4.7 8.00 8 6.7 46.00 94 40.7 62.00 26 42.7 7.00 227 48.7 9.00 260 Dimensions are in inches, and are per ANSI B6.9 and ANSI B6.0. All weights are approximate, based on a metal density of.29 lb/in. Alaskan will use the schedule thicknesses shown for all sizes not specified by a standard unless otherwise directed. 7

Stainless Steel Pipe As Welded Pipe and Tubing Comparison of Wall Thicknesses 8 Alloys Stocked Include Types 04-L and 6-L. Other corrosion resistant alloys are available. Stocked in exact 20 foot lengths. As Welded pipe and tubing is rolled and welded from ASTM A 240 material and is normally supplied untested. ASTM A 778 is considered to be the most applicable ASTM specification for as welded pipe and tubing. ASTM A 8 HT-O and ASTM A 409 HT-O also apply to as welded pipe but require more extensive testing. Non-stan dard diameters and cut lengths are available. ID size tubing is available. Nominal Pipe Size Outside Diameter Weight Per Foot Wall Thickness: Listed in Inches with Corresponding Standard Gauge 6 4 2 0.060.07.0.20.4.6.87.28.20.2.7.00 2..6 2.2 2. 2.7 2 2..9 2.6.0. 2.6 2.0 2.7.. 2 2 7.8 2..2.6 4.0.9 2.4..8 4.2 2. 2.8.9 4.4 4.9 6.0 6.8 7.8 8.9 4 2.6.2 4...7 6.9 7.8 9.0 0.2 4 4 2.9.6.0.7 6.4 7.8 8.8 0.2.6.2 4.0.6 6.4 7. 8.7 9.8.4.0 9 / 6.6 4. 6. 7. 8.0 9.7.0 2.7 4. 6.9 4.9 6.8 7.7 8.6 0..9.8.7 6 6 4..4 7. 8. 9..7.2. 7.4 2. 2.6 8.2 6. 9. 0.. 4. 6.0 8. 2.2 26.2. 4.0 8 8.6 7.0 9.8.2 2.4. 7. 20.0 22.9 28.4.8 44.4 0 6. 8..4.0 4. 7.7 20. 2. 26.6.0 9..9 0 0 7.0 8.8 2.2.9.6 9. 2.6 2. 28.7.6 42. 6.0 2 7.8 9.8.7.6 7.4 2. 24.2 28. 2. 9.9 47.7 62.9 2 2 8. 0.4 4. 6.6 8. 22.7 2.7 29.9 4.2 42.4 0.7 67.0 4.4 6.0 8.2 20. 2.0 28.2 2.8 7.6 46.7.9 7.8 6. 8.2 20.8 2.2 28.6 2. 7.6 4.0. 64. 84.7 8 4.7 20. 2. 26.2 2.2 6.4 42.4 48. 60. 72. 9.7 20 6. 22.8 26. 29..8 40. 47. 4.0 67.2 80. 07 22 8.0 2. 28.7 2.0.9.4 44.6.9 9.4 74.0 88.7 8 24 9.6 27.4..0 4.0 48.7 6.7 64.9 80.8 96.9 28 26 2. 29.7 4.0 7.9 46.6 2.8 6.4 70.4 87.6 0 9 28 2.0 6.6 40.8 0.2 6.9 66.2 7.8 94.4 0 0 9.2 4.8.8 6.0 7.0 8. 0 2 6 2 4.8 46.7 7.4 6.0 7.7 86.8 08 0 72 4 44.4 49.6 6.0 69. 80. 92.2 8 8 6 47. 2. 64.6 7.2 8. 97.7 22 46 94 8 49.7. 68. 77. 90.0 0 29 4 20 40 2. 8.4 7.9 8.4 94.8 09 62 26 42 4.9 6. 7. 8. 00 4 42 7 227 44 7.6 64. 79. 89.6 04 20 49 79 28 46 60.2 67.2 82.7 9.7 09 2 6 87 249 48 62.8 70. 86. 97.7 4 6 9 260 Dimensions are in inches. All weights are approximate, based on a metal density of.29 lb/in.

Annealed Welded Stainless Steel Pipe Alloys Stocked Include Types 04-L and 6-L. Other corrosion resistant alloys are available. Specifications: ASTM A 2 Stocked in 7-24 foot random mill lengths, plain ends. Annealed pipe is used when the specifications referenced are required and is available only in the NPS diameters and schedule wall thickness shown. Welded annealed pipe is available per ASTM A 2, ASME SA-2 and ASTM A 8, A 76, A 409 and MIL-P-2469 (corrosion tested) and is stocked in most sizes through 24" diameter. Nominal Pipe Size Outside Diameter Sch s Sch 0s Sch 40s Sch 80s T04L Part T6L Part T04L Part T6L Part T04L Part T6L Part.40 8 4762 T04L Part T6L Part.40 49 6720.67 447 6746 47 6762.840 02 6788 44 6796 60 0960 40096 4069.00 94 689 62 68 667 0986 400 4077. 69 68 722 6877 04 00 409 408.660 764 696 798 6940 00 02 404 409.900 829 6974 8 700 887 047 4027 4047 2 2.7 98 70 942 7069 976 709 40 40208 2 2.87 400 724 407 740 406 06 472980 0889.00 426 774 40 729 484 726 40 4026 4.000 4249 72 427 786 2049 747 47287 74 4 4.00 48 7467 462 749 496 76 29087 290906.6 287848 76 448 764 44982 44990 29088 29094 6 6.62 474 774 460 7768 4842 782 4697 787 8.62 4429 44820 28470 792 480 46204 06 02 8 8.62 4429 44820 28470 792 0 0.70 487 28077 28479 284727 4868 4622 4998 820 2 2.70 444 84 08 2847 4876 46220 29089 290922 Dimensions are in inches, and are per ANSI B6.9 and ANSI B6.0. All weights are approximate, based on a metal density of.29 lb/in. Alaskan will use the schedule thicknesses shown for all sizes not specified by a standard unless otherwise directed. 9

Stainless Steel Pipe Annealed Seamless Stainless Steel Pipe Alloys Stocked Include Types 04-L and 6-L. Other corrosion resistant alloys are available. Specifications: ASTM A 2 Stocked in 7-24 foot random mill lengths, plain ends. Annealed pipe is used when the specifications referenced are required and is available only in the NPS diameters and schedule wall thickness shown. Seamless "annealed" pipe is available per ASTM A 2 and MIL-P-2469 (corrosion tested) and is stocked through 4" size. Nominal Pipe Size Outside Diameter Sch s Sch 0s Sch 40s Sch 80s T04L Part T6L Part T04L Part T6L Part T04L Part T6L Part T04L Part.40 462008 T6L Part.40 60476 47404.67 4727.67 479 2967 970.840 47098 67492 4707 47420 8877 9768.00 470 6707 4697 4748 8876 90. 6748 67 472 47446 9047 9776.660 4724 47 90 47666.900 474 47242 4749 47462 906 9784 2 2.7 67426 672 477 47470 907 98 2 2.87 998 82 478 988.00 6744 6740 6749 49974 42.00 67 4.000 9089 4 4.00 67442 49706 4799 677 47608 928.6 67468 676 9097 96 6 6.62 266402 79902 67476 289620 902 26 8 8.62 67484 677 0 0.70 9946 Dimensions are in inches, and are per ANSI B6.9 and ANSI B6.0. All weights are approximate, based on a metal density of.29 lb/in. Alaskan will use the schedule thicknesses shown for all sizes not specified by a standard unless otherwise directed. 0

As Welded Stainless Steel Pipe and Tubing T04L - OD Alloys Stocked Include Types 04-L and 6-L. Other corrosion resistant alloys are available. Stocked in exact 20 foot lengths. As Welded pipe and tubing is rolled and welded from ASTM A 240 material and is normally supplied untested. ASTM A 778 is considered to be the most applicable ASTM specification for as welded pipe and tubing. ASTM A 8 HT-O and ASTM A 409 HT-O also apply to as welded pipe but require more extensive testing. Non-stan dard diameters and cut lengths are available. T04L Part number Nominal Outside 6 Pipe Size Diameter GA 4 GA 2 GA GA 0 GA 8 GA SCH s SCH 0s SCH 40s.60.6.88.20 486890 22879 86987 248420 4077 4 27066 82 22824 4 4 29962 4069 2909 44474* 6 2287 22949 84600 6 6 60806 228080 8 228072 2696 892 8 8 28862 22806 228022 0 26892 2676 249696 0 0 267 296 4720 90669 2778 2 40 290 4294 2 2 2470 269 944 2284 4 249060 2876 4402 2982 28429 6 898 294976 600 2798 8997 8 294968 8902 2768 8897 20 22804 88824 2782 8868 22 2099 46297 24 272974 490 8848 46 88492 28 647* 46967* 474908* 0 42086* 462* 49670* 4489* 470784* 404* 0 60947 2 49467* 6 49072* 789 46997* 62467* 4698* 40* 6 4277 609 8 49820* 42 4699* 067* 6044* 42 6096 *0 FT 2 FT Dimensions are in inches. All weights are approximate, based on a metal density of.29 lb/in.

Stainless Steel Pipe As Welded Stainless Steel Pipe and Tubing T6L - OD Alloys Stocked Include Types 04-L and 6-L. Other corrosion resistant alloys are available. Stocked in exact 20 foot lengths. As Welded pipe and tubing is rolled and welded from ASTM A 240 material and is normally supplied untested. ASTM A 778 is considered to be the most applicable ASTM specification for as welded pipe and tubing. ASTM A 8 HT-O and ASTM A 409 HT-O also apply to as welded pipe but require more extensive testing. Non-stan dard diameters and cut lengths are available. T6L Part Nominal Outside Pipe Size Diameter 4 GA 2 GA GA 0 GA 8 GA SCH s SCH 0s SCH 20s SCH 40s.6.88.20.2 2 27680 20647 2 2 444 2 4726 466086 298 2062 4662 408826 4 8428 2286 228 4 4 287 2888 84422 0 42 6 228828 8477 22829 6 6 8794 60729 22799 8 228064 866 24769 8 8 228048 22800 0 269 72 4 0 0 4764 908 906 27746 299780 2 9070 9047 42229 4902 2 2 899 906 29920 2702 26284 4 26428 2677 4082 4224 298 4690 6 8909 292869 89244 92 897 8 29706 270 89024 228226 88947 464 20 2889 8879 27702 8862 446866* 22 4876 24 887 4088 8887 4720 46277 88468 4220 24 4708* 28 4764* 42* 0 40947* 4040* 46202* 494* 0 98972 2 4608* 6 42890* 404296* 08406* 09* 29970* 6 604 602878 42 0679* 98964 48 90990* *0 FT 2 FT Dimensions are in inches. All weights are approximate, based on a metal density of.29 lb/in. 2

As Welded Stainless Steel Pipe and Tubing - ID Alloys Stocked Include Types 04-L and 6-L. Other corrosion resistant alloys are available. Stocked in exact 20 foot lengths. As Welded pipe and tubing is rolled and welded from ASTM A 240 material and is normally supplied untested. ASTM A 778 is considered to be the most applicable ASTM specification for as welded pipe and tubing. ASTM A 8 HT-O and ASTM A 409 HT-O also apply to as welded pipe but require more extensive testing. Non-stan dard diameters and cut lengths are available. Inside Diameter T04L Part 4 GA 2 48967 2 GA GA 2 4898 4866 2904 262 487 4 2849 270 4899 6 266 248 8 248 2 6209 4 48496 48608 Inside Diameter T6L Part 4 GA 2 4897 2 GA GA 0 GA 2 2946 47406 486002 4746 4 2784 2726 4798 8872 6 2779 272 47229 886 6 260* 8 249 4727 8848 8 884* 0 260 4724 880 0 8822* 2 8880 472 8864 4 4726 * 0 FT Length Dimensions are in inches. All weights are approximate, based on a metal density of.29 lb/in.

Stainless Steel Rod & Bar Stainless Steel Flat Bar T04(L) and T6(L) - Hot Rolled, Annealed, and Pickled, T0 - Cold Drawn, Annealed (CDA) ASTM A 82 T04(L), T6(L) - Sizes to THK ASTM A 276 Flat Strip, Plate Cut Sizes to THK ASTM A 276 Flat Bar, HRAP Size Ft 2 Ft T-0 Part Num. T-04/04L Part Num. T-6/6-L Part Num. Size Ft 2 Ft T-0 Part Num. T-04/04-L Part Num. T-6/6-L Part Num. x.2 2.6 2768 6749 x.260 9.20 626068 66220 x.9.828 2776 2784 x.260 9.20 6442* x 7.72 4.460 8926 x 4.400 40.800 62946* 29 420276 x.42.00 2807 2792 x 4.400 40.800 0697* x. 6.72 282 x 4.20.000 4227 47289 x.68 7.66 287 2849 x 6.00 6.200 480 472867 x.744 8.90 89224 x 6.00 6.200 6890* x 2.80 0.200 286 287 x 8 6.800 8.600 49679 x 2.060 2.720 487 68079 x.66 7.66 447* x.280.60 288 42702 x.96.470 408* x 4.700 20.400 4786 4270 x.280.60 62* 2 227 x 6 2.20 0.240 66974 908 x.280.60 28228* / 6 x.9.828 2899 x.94 9.0 2 894 / 6 x.478.76 2904 6728 x.9 22.960 62962* 269 28 / 6 x.68 7.66 67007* 292 2920 x.9 22.960 282246* / 6 x.797 9.64 670009* 2946 298 x 2 2.0 0.600 62904* 08 29 / 6 x.97.480 67002* 294 2962 x 2 2.0 0.600 28224* / 6 x 2.280.60 6864* 2988 2970 x 2.88 8.26 6 46877 / 6 x 2.90 9.080 24677 4629 x.82 4.900 6292* 24 2 / 6 x.90 22.920 68780* 2996 007 x.82 4.900 282270* / 6 x 4 2.60 0.720 29906 488826 x 4.46.60 0860 9404 / 6 x.88 8.26 496269 x 4.00 6.200 8 40 / 6 x 6.82 4.900 496277 67904 x 6.7 76.00 494 476942 / 6 x 8.20 6.440 4966 x 6 7.60 9.800 42897 47690 x.42.00 0 677970 x 8 0.200 22.400 49687 67027 x.42.00 990* 677988* x.27.00 6222* 6806* x.66 7.60 40 42007 x.700 20.400 6269* 66 74 x.66 7.60 296* x 2.2 2.00 82 x.80 0.200 624* 049 06 x 2.2 2.00 2820* x.80 0.200 4078* x 2.0 0.600 62970* 90 4 x.060 2.720 6279* 07 466248 x 2.0 0.600 2829* 648* x.060 2.720 6484* x 2.97.700 8922 x.280.60 6294* 08 04 x 2.400 40.800 6287* 49 42 x.280.60 26208* x 2.400 40.800 28227* 6409* x.64 9.70 46606 x 2 4.20.000 4 089 x 2.700 20.400 62920* 20 2 x.00 6.200 6288* 46 489 x 2.700 20.400 26997* x.00 6.200 76* x 2 2.20 2.440 4 62 x 4 6.800 8.600 62899* 497 442 x 2 2.20 2.440 9649* x 4 6.800 8.600 6870* 6807* x 2.0 0.600 6298* 88 70 x 8.00 02.000 29820 47968 4 x 2.0 0.600 422480* x 6 0.200 22.400 44 44077 *Square Edge (True)

Stainless Steel Flat Bar (continued) Size Ft 2 Ft T-0 Part Num. T-04/04L Part Num. T-6/6-L Part Num. Size Ft 2 Ft T-0 Part Num. T-04/04-L Part Num. T-6/6-L Part Num. x 6 0.200 22.400 6870* 746* x.00 6.200 62768* 48699* 6970* x 8.600 6.200 4969 629749 x.90 7.400 67770* 677768* x 2.2 2.00 40266* 682* x 2 6.800 8.600 62776* 60* 84999* x 2.66.872 466* 6824* x 2 8.00 02.000 6769* 67627* x.90 8.280 0* 682* x 0.200 22.400 62789* 86* 66608* x 2 4.20.000 28* 6* x.900 42.800 676* 67669* x 2. 6.780 487820* 68269* x 4.600 6.200 62792* 248200* 626* x 6.80 76.60 42* 68277* x 7.000 204.000 6889* 68468* x 4 8.00 02.000 407* 6828* x 6 20.420 24.040 62807* 68798* 6772* x 6 2.70.000 67489* 672920* x 2 9.6 4.800 409* x 2.0 0.600 2220* 67620* x 2 0.20 2.000 670960* 6282* 66906* x.88 8.26 67204* 4966* x 2 2.70.000 80* 669024* x.80 4.960 6278 44* 429* x.00 8.000 6400* 66902* x 2.00 6.200 62726* 2489* 8497* x 4 20.400 244.800 6806* 669040* x 2 6.7 76.600 24828* 6666* x 6 0.600 67.200 640* 66908* x 7.60 9.800 6274* 222440* 862* 2 x 20.400 244.800 6807* 6840* x 4 0.704 28.448 62742* 40469* 627* 2 x 4 27.200 26.400 49928* 68442* x.00 7.200 6426* 6664* x 6.700 88.400 6270* 829* 669* *Square Edge (True) Stainless Steel Hexagon Bar Cold Drawn Finish Stocked in 2 foot random lengths Size Ft 2 Ft Length T-0 Part T-04/04L Part T-6/6L Part / 6.0.26 228894.84 2.208 2 / 6.288.46 78 6764.44 4.968 86 7 / 6.64 6.768 94.76 8.82 22 27 687284.0.800 267 29 24.66 9.872 27 28 29 7 2.24 27.048 22 / 6 2.88.06 0 2.94.40 48 6 64 4.600.200 40 98 22664 6.620 79.440 44 8720 6877 8.400 00.800 97772 2.780 4.400 4 6846 46 2 6.60 99.00 092 2 8.400 220.800 6847 68489 00 26.00 8.000 68497 6802 680

Stainless Steel Rod & Bar Stainless Steel Square Bar Straight lengths, 2 foot random lengths Size Ft 2 Ft Length T-0 Part T-04/04L Part T-6/6L Part.0.66 0928 / 6.20.44 4990 096.2 2.6 092 0944 / 6.2.984 2067 0960.478.76 0986 0978.80 0.200 62270 0994 00.20.840 02 0.9 22.96 6209 09 047 7 2.60.26 06 0.400 40.800 62047 07 097 4.0.66 6426.0 6.760 70448 0 02 7.60 9.800 9472 28 6 2.600 6.20 62946 44 649 2 7.20 206.600 802 2 (HRAP) 2.20 2.000 626767 46279* 6006* 0.600 67.200 0970** 09698** 86828** 4 4.400 60.000 66202** 669066** * Cold Drawn **Hot 6

Stainless Steel Round Rod Type and Finish Stocked in 2 foot random straight lengths, Sizes / 6 and smaller Cold Drawn Annealed (CDA); Sizes to 4 Smooth Turned (ST); Over 4 Rough Turned (RT) Diameter Ft Length T-0 Part # T-04/L Part # T-6L Part # Diameter Ft Length T-0 Part # T-04/L Part #.042.04 8 26 4 2.062 80.744 286208 228 202 / 6.094.28 68 0 42 2 7 / 6.860 90.20 20.69 2.026 76 84 92 2 6.690 200.280 260 286 2409 / 6.262.44 649 6 62 2 8.400 220.800 66.78 4.6 67 66 67 2 20.200 242.400 248 22876 2467 7 / 6.4 6.68 699 474 704 2 7 22.070 264.840 22999 286096.67 8.02 720 78 72 24.00 288.60 249 24 20 9 / 6.84 0.40 788 770 762 26.8.46 68694 474.00 2.600 796 80 8 28.206 8.472 264 2629 260 / 6.262 4.44 8 0.420 6.040 42. 8.20 869 877 908 2.70 92.20 266 2687 2700 / 6.778 2.6 409987 494908.090 42.00 447 7 2.04 24.40 924 92 966 7.2 40.624 2807 2784 2768 / 6 2.0 28.200 974 64920 29768 4 42.726 2.72 28 28 287 2.680 2.60 209 2027 200 4 4.070 648.840 294 2946 2920.80 40.60 209 26 2077 66.760 80.20 2988 007 02 / 6.766 4.90 28 266 290 7.600 88.200 472 4.70 0.040 229 2247 220 80.780 969.60 88 62 / 6 4.600.200 49 90.9 0.4 68806 28886.020 60.240 22 260 26 6 96.0.60 20 227 7 / 6.8 66.26 4079 242 6 4.420 7.040 28 6.00 72.20 249 24 247 6 2.700 460.400 6772 640 9 / 6 6.20 78.240 62 7 0.80 69.960 2222 4996 7.0 84.600 20 26 272 7 2.20 826.20 97447 26880 / 6 7.600 9.200 298 8 70.900 200.800 08 24 8.80 98.60 26 267 269 9 26.00 29.600 48690 602 7 9.88 2.66 274 278 0 267.000 204.000 4869 / 6 0.020 20.240 67882 270 22897 2.040 876.480 4900 2 0.680 28.60 209 26 22 2 84.00 464.000 48692 2 / 6 2.778.6 220 6484 282 4 2.20 6279.840 60644 2.9 62.228 222 2247 226 6 68.20 8202.240 649642 T-6L Part # 7

Stainless Steel Rod & Bar Stainless Steel Round Rod Type and Finish Stocked in 2 foot random straight lengths, Sizes / 6 and smaller Cold Drawn Annealed (CDA); Sizes to 4 Smooth Turned (ST); Over 4 Rough Turned (RT) Diameter Ft Length.00 2.600 64888.0 8.20 647894 7 2.04 24.40 6487 2.680 2.60 647909.80 40.60 64797 4.70 0.040 64874 / 6 4.600.200 64792.020 60.240 6487 6.00 72.20 6479 7.0 84.600 64882 8.80 98.60 64797 2 0.680 28.60 64794 2 2.060 44.720 648840 2.9 62.228 648769 2 6.690 200.280 64799 2 20.200 242.400 648777 24.00 288.60 647967 2.70 92.20 64878 4 42.726 2.72 64879 4 4.070 648.840 649 4 60.20 72.000 698 66.760 80.20 6966 0 267.000 204.000 6470 7-4 PH (T-60) Condition A Part 8

Stainless Steel Rod & Bar Stainless Steel Round Rod Type and Finish Stocked in 2 foot random straight lengths, Turned, Ground & Polished Rod. through - +.000 /-.00, through 2 +.000/-.002. Diameter Size Ft Length TG&P T0 Part TG&P T04 Part (.499/.498).670 8.02 646 48 (.624/.62).00 2.600 64 6606 (.749/.748).0 8.20 662 08260 7 (.8740/.870) 2.04 24.40 (.999/.998) 2.680 2.60 670 40896 (.249/.248) 4.70 0.040 688 07 / 6 (.86/.8).766 4.92 87 7 / 6 (.47/.46).8 66.26 0809 (.499/.498) 6.00 72.20 696 0 (.624/.62) 7.0 84.600 / 6 (.97/.9) 0.020 20.240 409000 2 (.99/.9980) 0.680 28.60 442 9

Stainless Steel All-Thread Rod T04 (8-8), T6 Diameter Thread Ft Length T-04 Part T-6 Part 20.68 2.06 6907 69 / 6 8.262.44 6949 696 6.98 4.6 6999 697 7 / 6 4.4 6.68 6608 6604.67 8.02 6600 66076.00 2.600 66092 662 0.0 8.20 6649 666 7 9 2.04 24.40 668 8 2.680 2.60 6622 6628 7.70 42.840 90 Stainless Steel Half Round Rod ASTM A 276 Stocked in 20 FT lengths Size Ft Length T-04 Part x.40 6.70 8868 x / 6.0 0.00 88626 x.7.00 8864 20

Stainless Steel Rod & Bar HRAP Structural Channel Non-Tapered Specifications: ASTM A 276 Stocked in 20-22 FT random lengths Size (A) Web (B) Flange (C) Thickness (D) Ft Length** T04/L Part 40 mm mm 20 mm mm.20 26.40 62 T6L Part.2.70.2.7 2.74 6072 2.2.000.2.9.98 6926 667690 2.87.000.87 2.2.04 6407 2.20.000.20 2.88 6.6 6298 694.87.7.87. 78.0 6664 6767.87.00.87.70 8.40 66622.20.00.20 4.78 0.6 0779 6609 4.20.70.20 6.0.0 64600 667 4.20 2.000.20 6. 44.0 0787 662 6.20.000.20 0.00 220.00 62899 669 6.7.000.7 4.0 9.00 62904 6667 8.220 2.260.90.0 2.00 647* 6722* 8.20 4.000.20.70 0.40 646* 674* 8.7 4.000.7 9.70 4.40 698 6926 8.487 2.20.90 8.7 42.0 6474* 670* 0.240 2.600.46.0 6.60 642* 6642* 0.79 2.79.46 20.00 440.00 6209* 660* 2.282 2.942.0 20.70 4.40 666* 72789* 2.87.047.0 2.00 0.00 67266 67266 2.0.70.0 0.00 660.00 672726 67274.400.400.60.90 74.80 6447* 6702* *Laser Fused Some of the above non-tapered sizes may be available in tapered form if required. Tapered 2 Size (A) Web (B) Flange (C) Thickness (D) Ft Length** T04/L Part T6L Part.70.40.27 4.0 90.20 6072 686 4.84.84.296.40 8.80 647470 694 4.296.72.2 7.2 9.0 6249 66209.90.70.20 6.70 47.40 6288 66.2.88.20 9.00 98.00 6292 664 6.200.900.4 8.20 80.40 6794 667 6.4 2.04.4 0.0 2.00 6287 668 ** Weight based on 22 FT lengths

Stainless Steel Rod & Bar T-04/04L Structural Tee Bar Specifications: ASTM A 276 Stocked in 20-22 FT random lengths Size (A) Flange (B) Thickness (C) Ft Length Part.80 7.60 6244 / 6.80 9.60 6696 2.0 0.60 66924 2 2.22 70.84 488787.20 4.40 6692 4 4 6.70 47.40 644749 4 4 9.74 24.28 64477 22

Stainless Steel Rod & Bar Non-Tapered Wide Flange Structural I-Beam Specifications: ASTM A 276 Stocked in 20-22 FT random lengths Nominal Size (A) Width (A) Flange (B) Web (C) Thickness (D) Ft Length** T04/L Part T6L Part W4 x # 4.6 4.06.280.4.00 286.00 6264 698 W6 x 9#.90.94.70.2 9.00 98.00 676 694 W6 x 2# 6.0 4.00.20.280 2.00 264.00 626 6942 W6 x #.99.99.20.260.00 0.00 6266 66972 W6 x 6# 6.28 4.0.260.40 6.00 2.00 6728 W6 x 20# 6.20 6.02.260.6 20.00 440.00 62679 6697 W6 x 2# 6.8 6.08.20.4 2.00 0.00 64476 669749 W8 x 0# 7.89.94.70.20 0.00 220.00 6600 6968 W8 x # 7.99 4.00.20.2.00 286.00 6427 W8 x # 8. 4.0.24..00 0.00 62687 W8 x 8# 8.4.2.20.0 8.00 96.00 6269 66977 W8 x 2# 8.28.27.20.400 2.00 462.00 64 66976 W8 x 28# 8.06 6..28.46 28.00 66.00 62700 6984 W8 x # 8.00 7.99.28.4.00 682.00 62726 6992 W8 x # 8.2 8.02.0.49.00 790.00 66999 674 W8 x 40# 8.2 8.07.60.60 40.00 880.00 6762 6770 W0 x # 9.99.96.20.270.00 0.00 672742 67270 W0 x 7# 0. 4.0.240.0 7.00 74.00 6644 W0 x 9# 0.24 4.02.20.7 9.00 48.00 666000 W0 x 26# 0..77.260.440 26.00 72.00 664 6426 W0 x # 9.7 7.96.290.4.00 726.00 66608 W2 x 22# 2. 4.0.260.42 22.00 484.00 6646 W2 x 26# 2.22 6.49.20.80 26.00 72.00 677807 669969 W2 x # 2.0 6.6.00.20.00 770.00 676 6762 W2 x 40#.94 8.0.29. 40.00 880.00 6768 670229 * Modified ** Weight based on 22 FT Lengths 2

Stainless Steel Rod & Bar Tapered Standard Structural I-Beam Specifications: ASTM A 276 Stocked in 20-22 FT random lengths Nominal Size (A) Width (A) Flange (B) Web (C) Thickness (D) Ft Length** * Modified ** Weight based on 22 FT Lengths T04/L Part T6L Part S x.7# 2.0.70.260.70 2.40 62849 689 S x 7.6#* 2.7.20.7 7.6 67.42 6470 S4 x 9.2#* 4 2.70.20.6 9.2 20.0 600 66870 S4 x 7.7# 4 2.66.9.29 7.70 9.40 6267 6900 S x 0#.004.24.26 0.00 220.00 6287 6926 S x 2.#*.000.26.26 2. 27.22 6476 S6 x 2.# 6.2.22.9 2.0 27.00 6286 690 S6 x 6.9#* 6.0.9.9 6.9 72.46 64744 24

Stainless Steel Sheet, Plate & Coil T-04 2B Stainless Steel Sheet & Coil* ASTM A 240, ASME SA-240 Thickness Gauge Sizes Sq Ft Sheet Part Thickness Gauge Sizes Sq Ft Sheet Part.0 28 48 x COIL.60 8.048 8 6 x COIL 2.06 22.0 28 48 x 20.60 2.200 66.048 8 6 x 96 2.06 48.84 4874.08 26 6 x COIL.76 22472.048 8 6 x 20 2.06 60.480 48769.08 26 6 x 96.76 8.44 292.048 8 6 x 44 2.06 72.76 2996.08 26 6 x 20.76 22.680 4844.048 8 48 x COIL 2.06 224.08 26 6 x 44.76 27.26 2986.048 8 48 x 48 2.06 2.26 872.08 26 48 x COIL.76 22464.048 8 48 x 96 2.06 64.2 4878.08 26 48 x 96.76 24.92 2967.048 8 48 x 20 2.06 80.640 48808.08 26 48 x 20.76 0.240 48442.048 8 48 x 44 2.06 96.768 48824.08 26 48 x 44.76 6.288 2964.048 8 60 x COIL 2.06 227.024 24 6 x COIL.008 2246.048 8 60 x 96 2.06 80.640 292.024 24 6 x 96.008 24.90 48476.048 8 60 x 20 2.06 00.800 48840.024 24 6 x 20.008 0.240 48484.048 8 60 x 44 2.06 20.960 29269.024 24 42 x COIL.008 4829.060 6 6 x COIL 2.20 2229.024 24 48 x COIL.008 22448.060 6 6 x 96 2.20 60.480 48866.024 24 48 x 96.008 2.26 2946.060 6 6 x 20 2.20 7.600 48882.024 24 48 x 20.008 40.20 4807.060 6 6 x 44 2.20 90.720 4890.024 24 48 x 44.008 48.84 482.060 6 48 x COIL 2.20 22.00 22 6 x COIL.260 2240.060 6 48 x 96 2.20 80.640 4892.00 22 6 x 96.260 0.240 4849.060 6 48 x 20 2.20 00.800 48947.00 22 6 x 20.260 7.800 486.060 6 48 x 44 2.20 20.960 4896.00 22 48 x COIL.260 229.060 6 60 x COIL 2.20 220.00 22 48 x 96.260 40.20 488.060 6 60 x 96 2.20 00.800 298.00 22 48 x 20.260 0.400 48604.060 6 60 x 20 2.20 26.000 49008.00 22 48 x 44.260 60.480 48620.060 6 60 x 44 2.20.200 2962.06 20 6 x COIL.2 2287.060 6 72 x COIL 2.20 46878.06 20 6 x 96.2 6.288 48646.060 6 72 x 96 2.20 20.960 0790.06 20 6 x 20.2 4.60 48662.060 6 72 x 20 2.20.200 47228.06 20 6 x 44.2 4.42 296.060 6 72 x 44 2.20 8.440 472299.06 20 48 x COIL.2 2279.07 4 6 x COIL.0 22498.06 20 48 x 96.2 48.84 48688.07 4 6 x 96.0 7.600 292.06 20 48 x 20.2 60.480 4870.07 4 6 x 20.0 94.00 49024.06 20 48 x 44.2 72.76 48727.07 4 6 x 44.0.400 49040.06 20 60 x COIL.2 226.07 4 48 x COIL.0 22480.06 20 60 x 96.2 60.480 49807.07 4 48 x 96.0 00.800 49066.06 20 60 x 20.2 7.600 227898.07 4 48 x 20.0 26.000 49082.06 20 60 x 44.2 90.720 2279.07 4 48 x 44.0.200 490 2

T-04 2B Stainless Steel Sheet & Coil* (continued) Thickness Gauge Sizes Sq Ft Sheet Part Thickness Gauge Sizes Sq Ft Sheet Part.07 4 48 x 240.0 22.000 8709.20 60 x 20.040 22.000 49278.07 4 60 x COIL.0 22406.20 60 x 44.040 02.400 22794.07 4 60 x 96.0 26.000 224.20 60 x 240.040 04.000 49286.07 4 60 x 20.0 7.00 499.20 72 x COIL.040 4299.07 4 60 x 44.0 89.000 49.20 72 x 20.040 02.400 488.07 4 60 x 240.0.000 87.20 72 x 44.040 62.880 496.07 4 72 x COIL.0 429.20 72 x 240.040 604.800 420.07 4 72 x 96.0.200 4722. 0 6 x COIL.670 4487.07 4 72 x 20.0 89.000 4049. 0 6 x 96.670 6.080 02442.090 48 x COIL.78 74449. 0 6 x 20.670 70.00 462202.090 48 x 20.78.400 499966. 0 48 x COIL.670 228.0 2 6 x COIL 4.40 282678. 0 48 x 96.670 8.440 6249.0 2 6 x 96 4.40 0.840 4998. 0 48 x 20.670 226.800 49294.0 2 6 x 20 4.40 2.00 284866. 0 48 x 44.670 272.60 4909.0 2 6 x 44 4.40 8.760 49966. 0 48 x 240.670 4.600 890.0 2 48 x COIL 4.40 226999. 0 60 x COIL.670 2277.0 2 48 x 96 4.40 4.20 62. 0 60 x 96.670 226.800 247204.0 2 48 x 20 4.40 76.400 4989. 0 60 x 20.670 28.00 497.0 2 48 x 44 4.40 2.680 49202. 0 60 x 44.670 40.200 492.0 2 48 x 240 4.40 2.800 8767. 0 60 x 240.670 67.000 8929.0 2 60 x COIL 4.40 227042. 0 72 x COIL.670 4297.0 2 60 x 96 4.40 76.400 2829. 0 72 x 20.670 40.200 408.0 2 60 x 20 4.40 220.00 4926. 0 72 x 44.670 408.240 4099.0 2 60 x 44 4.40 264.600 49244. 0 72 x 240.670 680.400 462.0 2 60 x 240 4.40 44.000 8806.60 8 48 x COIL 6.720 490.0 2 72 x 240 4.40 29.200 470.60 8 48 x 6 6.720 80.640 4968.20 48 x COIL.040 229.60 8 48 x 20 6.720 268.800 49.20 48 x 60.040 00.800 7464.60 8 48 x 44 6.720 22.60 400.20 48 x 96.040 6.280 2240.874 7 48 x COIL 7.87 26848.20 48 x 20.040 20.600 4922.874 7 48 x 20 7.87 4.840 494.20 48 x 44.040 24.920 49260.874 7 48 x 44 7.87 77.808 4946.20 48 x 240.040 40.200 880.874 7 60 x COIL 7.87 06.20 60 x COIL.040 227678.874 7 60 x 20 7.87 9.0 296.20 60 x 96.040 20.600 22797.874 7 60 x 44 7.87 472.260 62989 * Coil stock may be cut to custom lengths. Note: Widths may be mill edge. Lengths may be random. 26

Stainless Steel Sheet, Plate & Coil T-04 #4 Stainless Steel Sheet & Coil ASTM A 240, ASME SA-240 Thickness Gauge Sizes Sq Ft Sheet Part Thickness Gauge Sizes Sq Ft Sheet Part.08 26 48 x COIL.76 2226.048 8 60 x 20 2.020 00.800 4888.08 26 48 x 96.76 24.92 224272.048 8 60 x 44 2.020 20.000 24829.08 26 48 x 20.76 0.240 48468.060 6 6 x COIL 2.20 220.024 24 6 x COIL.008 22228.060 6 6 x 96 2.20 60.480 48874.024 24 6 x 96.008 24.92 224264.060 6 6 x 20 2.20 7.600 48890.024 24 6 x 20.008 0.240 48492.060 6 6 x 44 2.20 90.720 489.024 24 6 x 44.008 6.288 29497.060 6 48 x COIL 2.20 274.024 24 48 x COIL.008 2220.060 6 48 x 96 2.20 80.640 4899.024 24 48 x 96.008 2.26 2928.060 6 48 x 20 2.20 00.800 489.024 24 48 x 20.008 40.20 48.060 6 48 x 44 2.20 20.960 4897.024 24 48 x 44.008 48.84 48.060 6 60 x COIL 2.20 69.00 22 6 x COIL.260 22202.060 6 60 x 96 2.20 00.800 4206.00 22 6 x 96.260 0.240 487.060 6 60 x 20 2.20 26.000 4906.00 22 6 x 20.260 7.800 487.060 6 60 x 44 2.20.200 22790.00 22 6 x 44.260 4.60 4768.07 4 6 x COIL.0 2227.00 22 48 x COIL.260 2297.07 4 6 x 96.0 7.600 2247.00 22 48 x 96.260 40.20 4899.07 4 6 x 20.0 94.00 4902.00 22 48 x 20.260 0.400 4862.07 4 6 x 44.0.400 4908.00 22 48 x 44.260 60.480 4868.07 4 48 x COIL.0 22.06 20 6 x COIL.0 22.07 4 48 x 96.0 00.800 49074.06 20 6 x 96.0 6.288 4864.07 4 48 x 20.0 26.000 49090.06 20 6 x 20.0 4.60 48670.07 4 48 x 44.0.200 49.06 20 6 x 44.0 4.42 2940.07 4 60 x COIL.0 2760.06 20 48 x COIL.0 2269.07 4 60 x 96.0 26.000 446.06 20 48 x 96.0 48.84 48696.07 4 60 x 20.0 7.00 4947.06 20 48 x 20.0 60.480 4879.07 4 60 x 44.0 89.000 496.06 20 48 x 44.0 72.76 487.0 2 6 x COIL 4.40 48867.048 8 6 x 96 2.020 48.84 487.0 2 6 x 96 4.40 0.840 09.048 8 6 x 20 2.020 60.480 48777.0 2 6 x 20 4.40 2.00 49804.048 8 48 x COIL 2.020 2742.0 2 6 x 44 4.40 8.760 094.048 8 48 x 96 2.020 64.2 4879.0 2 48 x COIL 4.40 224.048 8 48 x 20 2.020 80.640 4886.0 2 48 x 96 4.40 4.20 279489.048 8 60 x COIL 2.020 286460.0 2 48 x 20 4.40 76.400 4997.048 8 60 x 96 2.020 80.640 406947.0 2 48 x 44 4.40 2.680 4920 Note: Widths may be mill edge. Lengths may be random. 27

T-04 #4 Stainless Steel Sheet & Coil (continued) Thickness Gauge Sizes Sq Ft Sheet Note: Widths may be mill edge. Lengths may be random. Part Thickness Gauge Sizes Sq Ft Sheet Part.0 2 60 x COIL 4.40 2769.20 48 x 44.040 24.920 2464.0 2 60 x 96 4.40 76.400 28804.20 60 x 20.040 22.000 4790.0 2 60 x 20 4.40 220.00 22429.4 0 48 x COIL.670 498669.0 2 60 x 44 4.40 264.600 2487.4 0 48 x 20.670 226.800 4866.20 48 x COIL.040 26290.4 0 48 x 44.670 272.60 4867.20 48 x 96.040 6.280 4484.4 0 60 x 96.670 226.800 89.20 48 x 20.040 20.600 246.4 0 60 x 44.670 40.200 827 28

Stainless Steel Sheet, Plate & Coil T-04 #8 (Mirror) Stainless Steel Sheet ASTM A 240, ASME SA-240 Thickness Gauge Sizes Sq Ft Sheet Part Thickness Gauge Sizes Sq Ft Sheet Part.00 22 48 x 20.260 0.400 492.07 4 48 x 20.0 26.000 0470.06 20 48 x 20.0 60.480 00.0 2 48 x 20 4.40 76.400 0462.048 8 48 x 20 2.020 80.640 49247.20 48 x 20.040 20.600 40767.060 6 48 x 20 2.20 00.800 4929 Note: Widths may be mill edge. Lengths may be random. 29

Stainless Steel Sheet, Plate & Coil T-04 # HRAP Stainless Steel Plate & Coil ASTM A 240, ASME SA-240 Thickness Sizes Sq Ft Sheet Part Thickness Sizes Sq Ft Sheet Part / 6 48 x COIL 8.79 22640 48 x 20 6.00 69.840 620 / 6 48 x 96 8.79 274.28 224094 48 x 44 6.00 79.808 4689 / 6 48 x 20 8.79 4.60 046 48 x 240 6.00 9.680 468208 / 6 48 x 44 8.79 4.792 68 60 x COIL 6.00 49669 / 6 48 x 240 8.79 686.20 062 60 x 96 6.00 69.840 62696 / 6 60 x COIL 8.79 226444 60 x 20 6.00 824.800 4948 / 6 60 x 96 8.79 4.60 24996 60 x 44 6.00 990.00 4042 / 6 60 x 20 8.79 428.90 22777 60 x 240 6.00 649.600 469 / 6 60 x 44 8.79 4.740 22778 72 x COIL 6.00 464 / 6 60 x 240 8.79 87.900 06 72 x 240 6.00 980.000 2702 / 6 72 x COIL 8.79 4700 96 x COIL 6.00 49070 / 6 72 x 240 8.79 00.000 270728 48 x COIL 2.660 8 / 6 96 x COIL 8.79 49074 48 x 96 2.660 69.26 47792 / 6 96 x 240 8.79 7.000 27076 48 x 20 2.660 866.20 624 48 x COIL.62 226698 48 x 44 2.660 09.824 487642 48 x 96.62 7.84 2247 60 x COIL 2.660 88 48 x 20.62 446.480 67 60 x 20 2.660 08.0 487626 48 x 44.62.776 626 60 x 44 2.660 00.000 40460 48 x 240.62 892.960 0677 60 x 240 2.660 266.00 47289 60 x COIL.62 2264 72 x 44 2.660 4.76 8480 60 x 96.62 446.480 20469 96 x 240 2.660 46.000 270689 60 x 20.62 8.00 20972 60 x 44 26.80 60.000 40200 60 x 44.62 669.720 20964 96 x 240 26.80 4292.000 270697 60 x 240.62 6.200 072 60 x 44 2.20 928.000 40478 72 x COIL.62 44797 96 x 240 2.20 40.000 270702 72 x 240.62 49.000 2706 60 x 44 42.66 260.000 40486 96 x COIL.62 490742 60 x 240 42.66 4266.00 4746 96 x 240.62 786.000 27027 96 x 240 42.66 6827.000 270744 / 6 72 x 240.70 60.000 27062 96 x 240.000 8467.000 29027 / 6 96 x 240.70 2200.000 27069 96 x 240 6.40 09.000 42882 48 x COIL 6.00 46747 96 x 240 7.690 790.000 46797 48 x 96 6.00 27.870 2844 2 96 x 240 84.00 428.000 27072 Note: Widths may be mill edge. Lengths may be random. 0

T-04-L Stainless Steel Sheet & Coil ASTM A 240, ASME SA-240 Thickness Gauge Sizes Sq Ft Sheet Note: Widths may be mill edge. Lengths may be random. Part Thickness Gauge Sizes Sq Ft Sheet Part.048 8 48 x COIL 2.020 4229.0 2 72 x 240 4.40 29.200 467.048 8 48 x 20 2.020 80.640 4946.20 6 x COIL.040 64469.060 6 48 x COIL 2.20 426.20 6 x 20.040.200 644692.060 6 48 x 96 2.20 80.640 6000.20 48 x COIL.040 22760.060 6 48 x 20 2.20 00.800 4929.20 48 x 96.040 6.280 4226.07 4 48 x COIL.0 28402.20 48 x 20.040 20.600 627.07 4 48 x 96.0 00.800 497647.20 48 x 44.040 24.920 8484.07 4 48 x 20.0 26.000 496*.20 48 x 240.040 40.200 8249.07 4 48 x 44.0.200 7976.20 60 x COIL.040 227602.07 4 48 x 240.0 22.000 4960*.20 60 x 20.040 22.000 29609.07 4 60 x COIL.0 22696.20 60 x 240.040 04.000 82404.07 4 60 x 20.0 7.00 49668.20 72 x COIL.040 469.07 4 60 x 240.0.000 49707.20 72 x 96.040 24.920 8649.07 4 72 x COIL.0 4677.20 72 x 20.040 02.400 4982.07 4 72 x 96.0.200 98906.20 72 x 44.040 62.880 49826.07 4 72 x 20.0 89.000 47980.20 72 x 240.040 604.800 4988.07 4 72 x 44.0 226.800 48009. 0 48 x COIL.670 2840.07 4 72 x 240.0 78.000 4677. 0 48 x 96.670 8.440 28266.0 2 48 x COIL 4.40 288797. 0 48 x 20.670 226.800 4982.0 2 48 x 20 4.40 76.400 497. 0 48 x 44.670 272.200 287.0 2 48 x 44 4.40 2.680 26022. 0 48 x 240.670 4.600 8248.0 2 48 x 240 4.40 2.800 29629. 0 60 x COIL.670 2278.0 2 60 x COIL 4.40 22700. 0 60 x 20.670 28.00 49862.0 2 60 x 96 4.40 76.400 26009. 0 60 x 44.670 40.200 282.0 2 60 x 20 4.40 220.00 4976. 0 60 x 240.670 67.000 82496.0 2 60 x 44 4.40 264.600 2607. 0 72 x COIL.670 4708.0 2 60 x 240 4.40 44.000 827. 0 72 x 20.670 40.200 0642.0 2 72 x COIL 4.40 468. 0 72 x 44.670 408.240 896.0 2 72 x 20 4.40 264.600 406. 0 72 x 240.670 680.400 464660.0 2 72 x 44 4.40 7.20 407

Stainless Steel Sheet, Plate & Coil T-04-L # HRAP Stainless Steel Plate & Coil ASTM A 240, ASME SA-240 Thickness Sizes Sq Ft Sheet Part Thickness Sizes Sq Ft Sheet Part / 6 48 x COIL 8.79 22646 48 x 44 6.00 79.808 2878 / 6 48 x 96 8.79 274.28 2242 48 x 240 6.00 9.680 4690 / 6 48 x 20 8.79 4.60 224 60 x COIL 6.00 469 / 6 48 x 44 8.79 4.792 287408 60 x 20 6.00 824.800 4948 / 6 48 x 240 8.79 686.20 070 60 x 44 6.00 990.00 40494 / 6 60 x COIL 8.79 226428 60 x 240 6.00 649.600 47288 / 6 60 x 96 8.79 4.60 284777 72 x COIL 6.00 478 / 6 60 x 20 8.79 428.90 28478 72 x 240 6.00 980.000 270809 / 6 60 x 44 8.79 4.740 22467 96 x COIL 6.00 490768 / 6 60 x 240 8.79 87.900 064 96 x 240 6.00 2640.000 27087 / 6 72 x COIL 8.79 42989 48 x COIL 2.660 899 / 6 72 x 20 8.79 4.740 824 48 x 96 2.660 69.26 498708 / 6 72 x 44 8.79 67.688 4227 48 x 20 2.660 866.20 224206 / 6 72 x 240 8.79 00.000 270477 48 x 44 2.660 09.824 482977 / 6 72 x 288 8.79 2.70 4768 48 x 240 2.660 4774 48 x COIL.62 2269 60 x COIL 2.660 246 48 x 96.62 7.84 227 60 x 20 2.660 08.0 49409 48 x 20.62 446.480 0669 60 x 44 2.660 00.000 4009 48 x 44.62.776 2248 60 x 240 2.660 266.00 472906 48 x 240.62 892.960 068 72 x 240 2.660 299.000 27082 60 x COIL.62 22667 96 x 240 2.660 46.000 27040 60 x 96.62 446.480 208 60 x 44 26.80 60.000 4028 60 x 20.62 8.00 246787 60 x 240 26.80 47497 60 x 44.62 669.720 227880 72 x 240 26.80 29.000 27084 60 x 240.62 6.200 0808 96 x 240 26.80 4292.000 27089 72 x 96.62.776 67 48 x 20 2.20 284.920 27249 72 x 44.62 80.664 697 60 x 44 2.20 928.000 407 96 x COIL.62 490784 60 x 240 2.20 48076 96 x 240.62 786.000 270786 72 x 240 2.20 8.000 2897 / 6 48 x COIL.746 07298 96 x 240 2.20 40.000 27020 / 6 48 x 240.746 099.680 29929 60 x 240 42.66 4266.00 4702 / 6 60 x COIL.746 22676 72 x 240 42.66 20.000 27087 / 6 60 x 240.746 74.600 2748 96 x 240 42.66 6827.000 2708 / 6 72 x COIL.746 486 96 x 240.000 8467.000 27046 / 6 72 x 240.746 60.000 2804 48 x 96 6.40 400276 / 6 96 x COIL.746 490792 48 x 20 6.40 20.000 2728 / 6 96 x 240.746 2200.000 270794 96 x 240 6.40 09.000 2704 / 6 96 x 240.70 2200.000 2 96 x 240 84.00 428.000 27062 48 x 20 6.00 69.840 2249 2 Note: Widths may be mill edge. Lengths may be random.

Stainless Steel Sheet, Plate & Coil T-04-L 2B Plate Stainless Steel Plate & Coil ASTM A 240, ASME SA-240 Thickness Sizes Sq Ft Sheet Part Thickness Sizes Sq Ft Sheet Part 48 x COIL.62 84088 60 x 20.62 8.00 6449 48 x 20.62 446.480 84096 72 x 44.62 80.664 6649 60 x COIL.62 64447 Note: Widths may be mill edge. Lengths may be random.

T-6-L 2B Stainless Steel Sheet & Coil ASTM A 240, ASME SA-240 Thickness Gauge Sizes Sq Ft Sheet Part Thickness Gauge Sizes Sq Ft Sheet Part.08 26 48 x COIL.76 48767.07 4 72 x 20.0 89.000 496.08 26 48 x 20.76 0.240 497.07 4 72 x 44.0 226.800 4962.024 24 48 x COIL.00 2822.0 2 48 x COIL 4.40 227000.024 24 48 x 20.00 40.20 28802.0 2 48 x 48 4.40 70.60 496049.024 24 48 x 44.00 48.84 486468.0 2 48 x 96 4.40 4.20 6086.00 22 48 x COIL.260 26040.0 2 48 x 20 4.40 76.400 4972.00 22 48 x 20.260 0.400 278289.0 2 48 x 44 4.40 2.680 609.00 22 48 x 44.260 60.480 6008.0 2 48 x 240 4.40 2.800 292.06 20 48 x COIL.0 260448.0 2 60 x COIL 4.40 227068.06 20 48 x 96.0 48.84 6296.0 2 60 x 20 4.40 220.00 4977.06 20 48 x 20.0 60.480 49448.0 2 60 x 44 4.40 264.600 22967.06 20 48 x 44.0 72.76 27406.0 2 60 x 240 4.40 44.000 82.048 8 48 x COIL 2.020 22278.0 2 72 x COIL 4.40 42947.048 8 48 x 96 2.020 64.2 2807.0 2 72 x 20 4.40 264.600 404.048 8 48 x 20 2.020 80.640 49472.0 2 72 x 44 4.40 7.20 42.048 8 48 x 44 2.020 96.768 2827.0 2 72 x 240 4.40 29.200 44.060 6 48 x COIL 2.20 22260.20 48 x COIL.040 227084.060 6 48 x 48 2.20 40.20 0624.20 48 x 96.040 6.280 6044.060 6 48 x 96 2.20 80.640 62967.20 48 x 20.040 20.600 602.060 6 48 x 20 2.20 00.800 49.20 48 x 44.040 24.920 606.060 6 48 x 44 2.20 20.960 629.20 48 x 240.040 40.200 87.060 6 60 x COIL 2.20 2222.20 60 x COIL.040 227.060 6 60 x 96 2.20 00.800 2802.20 60 x 96.040 20.600 279269.060 6 60 x 20 2.20 26.000 4979.20 60 x 20.040 22.000 26208.060 6 60 x 44 2.20.200 2299.20 60 x 44.040 02.400 29879.07 4 48 x COIL.0 2269.20 60 x 240.040 04.000 8206.07 4 48 x 48.0 0.400 4960.20 72 x COIL.040 429.07 4 48 x 96.0 00.800 62894.20 72 x 20.040 02.400 429.07 4 48 x 20.0 26.000 6297.20 72 x 44.040 62.880 4227.07 4 48 x 44.0.200 62878.20 72 x 240.040 604.800 42.07 4 48 x 240.0 22.000 8299.4 0 48 x COIL.670 227.07 4 60 x COIL.0 22698 22698.4 0 48 x 96.670 8.440 6298.07 4 60 x 96.0 26.000 792.4 0 48 x 20.670 226.800 49820.07 4 60 x 20.0 7.00 49676.4 0 48 x 44.670 272.200 6002.07 4 60 x 44.0 89.000 28297.4 0 48 x 240.670 4.600 8264.07 4 60 x 240.0.000 8060.4 0 60 x COIL.670 22799.07 4 72 x 96.0.200 788.4 0 60 x 96.670 226.800 2828 Note: Widths may be mill edge. Lengths may be random. 4

Stainless Steel Sheet, Plate & Coil T-6-L 2B stainless Steel Sheet & Coil (continued) Thickness Gauge Sizes Sq Ft Sheet Part Thickness Gauge Sizes Sq Ft Sheet Part.4 0 60 x 20.670 28.00 49870.4 0 72 x 44.670 408.240 48.4 0 60 x 44.670 40.200 2048.4 0 72 x 240.670 680.400 446.4 0 60 x 240.670 67.000 8298.60 8 48 x COIL 6.720 227220.4 0 72 x COIL.670 4296.60 8 48 x 20 6.720 268.800 4994.4 0 72 x 96.670 272.60 4796.60 8 48 x 44 6.720 22.600 440.4 0 72 x 20.670 40.200 420.60 8 48 x 240 6.720 7.600 8997 Note: Widths may be mill edge. Lengths may be random.

T-6-L # HRAP Stainless Steel Plate & Coil ASTM A 240, ASME SA-240 Thickness Sizes Sq Ft Sheet Part Thickness Sizes Sq Ft Sheet Part / 6 48 x COIL 8.79 22642 48 x 20 6.00 69.840 07048 / 6 48 x 96 8.79 274.28 0787 48 x 240 6.00 9.680 46229 / 6 48 x 20 8.79 4.60 076 48 x 288 6.00 8.66 4627 / 6 48 x 44 8.79 4.792 224777 60 x COIL 6.00 4666 / 6 48 x 240 8.79 686.20 088 60 x 20 6.00 824.800 6077 / 6 60 x COIL 8.79 226494 60 x 44 6.00 990.00 40 / 6 60 x 96 8.79 4.60 27789 60 x 240 6.00 649.600 4668 / 6 60 x 20 8.79 428.90 27788 72 x COIL 6.00 44767 / 6 60 x 44 8.79 4.740 2809 72 x 44 6.00 87.72 62727 / 6 60 x 240 8.79 87.900 069 72 x 240 6.00 979.20 2702 / 6 72 x COIL 8.79 422008 96 x COIL 6.00 49082 / 6 72 x 240 8.79 00.000 27008 96 x 240 6.00 2640.000 27004 / 6 72 x 288 8.79 2.70 4667 48 x COIL 2.660 46 / 6 96 x 240 8.79 7.000 270299 48 x 20 2.660 866.20 27226 48 x COIL.62 2267 48 x 44 2.660 09.824 48499 48 x 96.62 7.84 070 60 x COIL 2.660 679 48 x 20.62 446.480 07080 60 x 20 2.660 08.0 6682 48 x 44.62.776 07064 60 x 44 2.660 00.000 404 48 x 240.62 892.960 8662 60 x 240 2.660 266.00 47294 60 x COIL.62 2268 72 x COIL 2.660 60 60 x 96.62 446.480 29776 72 x 44 2.660 9.76 84868 60 x 20.62 8.00 26669 72 x 240 2.660 299.60 27067 60 x 44.62 669.720 26677 96 x 240 2.660 46.000 27088 60 x 240.62 6.200 076 60 x 44 26.80 60.000 409 72 x COIL.62 42206 60 x 240 26.80 268.000 476 72 x 20.62 669.720 604244 72 x 240 26.80 29.000 28 72 x 44.62 80.664 4864 96 x 240 26.80 4292.000 2708 72 x 240.62 9.000 27049 60 x 44 2.20 928.000 409 96 x COIL.62 490807 60 x 240 2.20 22.000 4728 96 x 240.62 786.000 27049 72 x 240 2.20 8.000 2709 / 6 48 x COIL.746 460 96 x 240 2.20 40.000 274 / 6 60 x COIL.746 4200 48 x 240 42.66 4.200 4747 / 6 60 x 20.746 687.00 6049 60 x 44 42.66 260.000 4067 / 6 60 x 240.746 74.600 807 60 x 240 42.66 4266.00 476 / 6 72 x COIL.746 49869 72 x 240 42.66 20.000 2697 / 6 72 x 240.746 60.000 2866 96 x 240 42.66 6827.000 2764 / 6 96 x COIL.746 4908 96 x 240 47.80 762.800 4962 / 6 96 x 240.746 299.60 27070 48 x 240.00 4240.080 480878 48 x COIL 6.496 460 60 x 240.00 00.00 4744 6 Note: Widths may be mill edge. Lengths may be random.

Stainless Steel Sheet, Plate & Coil T-6-L # HRAP Stainless Steel Plate & Coil (continued) Thickness Sizes Sq Ft Sheet Part Thickness Sizes Sq Ft Sheet Part 96 x 240.00 8467.000 27096 2 72 x 240 84.008 007.000 27776 96 x 240 6.40 09.000 2798 2 96 x 240 84.008 428.000 27229 96 x 240 7.688 790.000 400242 2 96 x 44 94.780 9099.000 4044 2 60 x 240 84.008 8400.800 4778 2 96 x 240 0.2 6820.000 47204 T-7-L 2B & T-7-L # HRAP Stainless Steel Sheet, Plate & Coil ASTM A 240, ASME SA-240 T-7-L 2B Thickness Gauge Sizes Sq Ft Sheet Note: Widths may be mill edge. Lengths may be random. T-7-L # HRAP Part Thickness Sizes Sq Ft Sheet Part.060 6 6 X COIL 2.20 4422 / 6 48 X COIL 8.79 266.060 6 48 X COIL 2.20 2869 / 6 48 X 96 8.79 274.28 920.060 6 48 X 20 2.20 00.800 497 / 6 48 X 20 8.79 4.60 2607.060 6 48 X 44 2.20 20.960 27429 / 6 48 X 240 8.79 686.20 24999.060 6 60 X COIL 2.20 624 / 6 60 X COIL 8.79 028.060 6 60 X 96 2.20 00.800 6768 / 6 60 X 20 8.79 428.90 920.07 4 48 X COIL.0 22697 / 6 60 X 240 8.79 87.900 0746.07 4 48 X 96.0 00.800 28742 / 6 72 X 240 8.79 00.000 2982.07 4 48 X 20.0 26.000 49642 / 6 96 X 240 8.79 7.000 2729.07 4 48 X 240.0 22.000 84024 48 X COIL.62 22664.07 4 60 X COIL.0 27068 48 X 20.62 446.480 8426.0 2 48 X COIL 4.40 227026 48 X 240.62 892.960 8426.0 2 48 X 20 4.40 76.400 49749 60 X COIL.62 27026.0 2 48 X 44 4.40 2.680 462286 60 X 240.62 6.200 28462.0 2 48 X 240 4.40 2.800 86 72 X 240.62 9.000 27026.20 48 X COIL.040 96 X 240.62 78.920 2702.20 48 X 96.040 6.280 428 / 6 96 X 240.746 299.60 2724.20 48 X 20.040 20.600 27849 96 X 240 6.00 2640.000 27048.20 48 X 44.040 24.920 4266 72 X COIL 2.66 64.20 48 X 240.040 40.200 84 72 X 240 2.66 299.60 622. 0 48 X COIL.670 2277 96 X 240 2.66 46.000 272. 0 48 X 96.670 8.40 288 96 X 240 26.8 4292.000 2726. 0 48 X 20.670 226.800 4988 96 X 240 2.2 40.000 27279. 0 48 X 240.670 4.600 847 96 X 240 42.66 6827.000 2766. 0 60 X COIL.670 27042 96 X 240.00 8467.000 092.60 8 48 X COIL 6.720 28700 96 X 240 6.7 09.000 0449.60 8 48 X 240 6.720 7.600 20299 2 96 X 240 84.008 428.000 28742 7

Stainless Steel Sheet, Plate & Coil Special Stainless Steel Plate Types T-04 Stainless Steel HRAP Raised Diamond Flat Back Tread Plate Thickness Size Sq Ft Sheet Part 48 X COIL 6.0 6470 48 X 20 6.0 246.000 4062 / 6 48 X COIL 8.700 08 / 6 48 X 20 8.700 48.000 4064 / 6 48 X 44 8.700 47.600 4069 48 X COIL.20 49 48 X 20.20 40.000 40667 48 X 44.20 40.000 4067 48 X 20 6.70 64.800 4664 Note: Widths may be mill edge. Lengths may be random. T-04 Stainless Steel Flattened and Expanded Sheet Thickness Size Sq Ft Sheet Part - #8 48 X 96.690 22.080 0806 - #6 48 X 96.860 27.20 6228 - # 48 X 96.780 6.960 477029 - #8 48 X 96.460 4.720 0799 - #6 48 X 96.70 8.240 0797 - # 48 X 96.860 27.20 274 - #9 48 X 96.90 62.400 240 - # 48 X 96.680 2.760 60422 8 Oxford Pattern -SM Pattern 6-OM Pattern T-04 Stainless Steel Textured Sheet Thickness Size Sq Ft Sheet Textured Pattern Part 20 (.06) 48 X 20.0 60.000 -SM 70499 6 (.060) 48 X 20 2.2 00.800 Oxford 488842 6 (.060) 48 X 20 2.2 00.800 6-OM 7049 6 (.060) 48 X 96 2.2 80.640 6-OM 69904 4 (.07) 48 X 20. 26.000 Oxford 48880 4 (.07) 48 X 20. 26.000 6-OM 70492

Stainless Steel Sheet, Plate & Coil Stainless Steel Shim Stock Stocked in 6 x 0 rolls, packaged in tube ASTM A666 Thickness Alloy Temper Sq Ft CTN Part.00 T02 Full Hard.0.09 204.002 T02 Full Hard.09.8 20.00 T02 Full Hard.2.2 209.004 T02 Full Hard.7. 200.00 T02 Full Hard.2.0 22990.008 T02 Full Hard.4.79 22966.00 T02 Full Hard.4.9 2298.02 T02 Full Hard.2.09 22940.0 T02 Full Hard.6.6 2292.020 T02 Full Hard.84.82 22924.02 T02 Full Hard.06 2.9 2296.0 T02 Full Hard. 2.72 22908 9

Stainless Steel Tubing Annealed Welded and Seamless Tubing Stocked in 20 foot random lengths Alloys stocked include types 04, 04-L, 6-L, and 7-L. Other corrosion resistant alloys are available. Annealed tubing is used when the specifications referenced below are arequired. This tubing is primarily used for instrumentation, heat exchangers and in some ornamental applications. Welded annealed tubing is available per ASTM A 249, ASME SA-249 and ASTM A 29 and is stocked to 4 OD and availalbe up tp 8 OD. Seamless annealed tubing is available per ASTM 2, ASME SA-2 and ASTM A 269 and available up to 6 OD. Outside Diameter Wall Thickness Ft T04 Part T04L Part / 6.028.00 674 T6L Part T7L Part 40.0.080 4 29609 4426.049.0 42.06.28 4 / 6.06.80 89.0.27 47 290 486.049.7 46.06.2 47 944 2786.08.260 94470 7 / 6.028.2 442.028.4 449.0.74 4447 48 4840.049.26 246622 499 488.06.02 740 268860.08.80 9422.0.22 29227 874 627 2297.049.0.06.89 468.08.70 6094.0.267 292 268284.049.76 464 8772.06.490 447 4662 282.08.600 60494.09.60 9472 7.049.440 9899.0.60 2908.049.498 227.06.649 4489 4688 270079.20.200 60207.062.82 27222.06.8 496879.08.8 4744.20.00 42277 Note: Widths may be mill edge. Lengths may be random.

Annealed Welded and Seamless Tubing (continued) Outside Diameter Wall Thickness Ft T04 Part T04L Part T6L Part.06.996 8748 44448 242.09.68 4464.20 2.062 8209 2.06.4 48828 4727 28008 2.4 407286 2.06.700 46602 466044 2.20.000 40064.06 2.00 24764 4.06 2.800 49688 Note: Widths may be mill edge. Lengths may be random. T7L Part 4

Stainless Steel Tubing Ornamental Tubing Round Tubing Specification: ASTM A 4 Structural grade, not annealed, not tested, not intended for pressure applications. For use as table legs, railing, boat rails, grab rails, etc. Outside Diameter Guage Wall Thickness Ft 8.049.0 489246 6.062.02 4670 8.049.0 66006 Polished 80 Grit Part Polished Mirror Part 8.049.67 2894 2407 6.062.476 48924 24 7 20.0.4 4792 7 8.049.42 2892 86 7 6.062.47 6604 4794 4984 8.049.498 2888 887 6.062.649 22820 900 49669 8.049.640 470899 4670 6.062.82 2886 242 49674 6.062.996 2920 220422 496706 4.08.280 606000.20 2.062 489262 6.062.70 496722 6.062.08 22046 2 6.062.4 224 227 49670 2 4.08.700 6672 2.20.068 46447 2 6.062 2. 489270 2.20.884 489288 6.062 2.040 489296 Note: Widths may be mill edge. Lengths may be random. T6L Buffed #8 Finish Part 42

Ornamental Tubing Rectangular Tubing Specification: ASTM A 4 Structural grade, not annealed, not tested, not intended for pressure applications. For use as table legs, railing, boat rails, grab rails, etc. Outside Size Guage Wall Thickness Ft Standard Mill Finish Part x 6.062.826 7442 x 6.062.97 48928 x 2 8.049.967 48 x 2 6.062.270 60607 x 2.20 2.22 2449 x.20.068 626424 2 x.20.884 48 2 x 7.80.679 486 2 x 4.20 4.700 4887 2 x 4 7.80 6.90 489 2 x 4.20 8.9 420 2 x 7.80 8.27 49484 2 x 6 7.80 9.200 4474 2 x 6.20 2.68 40477 x 4 7.80 8.27 4892 x 6 7.88 0.70 4627 x 6.20.90 46209 4 x 6.20.620 4026 4 x 8.7.20 66080 6 x 8.20 22.420 6607 Note: Widths may be mill edge. Lengths may be random. Polished 80 Grit Part 4

Stainless Steel Tubing Ornamental Tubing Square Tubing Specification: ASTM A 4 Structural grade, not annealed, not tested, not intended for pressure applications. For use as table legs, railing, boat rails, grab rails, etc. Outside Size Guage Wall Thickness Ft Standard Mill Finish Part T6L Standard Mill Finish Part 8.049.467 48086 4890 6.062.606 48094 8.049.64 28970 6.062.826 487 4992 926 4.08.0 28299.20.46 482 4200 4899 8.049.800 48 6.062.047 2789 420 484 4.08.7 40 4267.20.844 489 42029 6.062.269 487 4207 290 4.08.60 4069 228284.20 2.060 488 4204 48927 7.80.2 42484 2 6.062.70 4824 942 2 4.08 2.6 099 2.20.068 4820 420 290 2 7.80 4.46 48248 4206 2.20 6.00 284890 0802 2.20.900 4784 2 7.80.90 489.20 4.700 48272 7.80 6.90 48280 42079.20 8.90 28490 488486 4.20 6.260 48298 4 7.80 9.270 480 42087 4.20 2.680 2849 49809 7.80.970 667 6 7.80 4.20 460 664 6.20 9.020 402 9992 8 7.80 9.60 66 Note: Widths may be mill edge. Lengths may be random. Polished 80 Grit Part 44

Stainless Steel Wire Stainless Steel Wire Types 04 & 6, Annealed Specification: ASTM A 80,, and 0 lb. Spools Diameter Temper Ft/Lb T-02 # Part T-04 # Part T-04 # Part T-04 0# Part.00 Cold Drawn Annealed 70.000 2786.020 Cold Drawn Annealed 92.000 492 294 T-04 RDM Part.024 Cold Drawn Annealed 642.000 229890 4207 22990.02 Cold Drawn Annealed 6.000 2299 42.04 Cold Drawn Annealed 220.000 249874 422.0 Cold Drawn Annealed 42.000 2946 249866.062 Cold Drawn Annealed 0.000 2024 2974.080 Cold Drawn Annealed 7.700 2996 2988 Stainless Steel Wire Cloth Stocked in rolls 6 wide, 00 ft long Mesh per inch Wire Diameter Inch Opening Width inch Open Area Percent Lbs per 00 Sq Ft Lbs per 00 ft Roll Part 2 x 2.06.47 76.2.6 22280 4 x 4.047.20 66 7.6 72.8 222864 6 x 6.0.4 6 4. 20.0 22290 8 x 8.028.097 60 4. 2. 222929 0 x 0.02.07 6 4.2 2.6 2229 6 x 6.08.044 4. 0. 2204 20 x 20.06.040 46 4.4 0.2 22048 0 x 0.0.020 7 4.8 04.4 227 40 x 40.00.00 6 27.6 82.8 220 60 x 60.007.0092 0 2.7 7. 226 80 x 80.00.0070 6.9 0.7 229 00 x 00.004.00 0 4.2 42.6 22226 200 x 200.002.0029 4 6.2 8.9 2220 4

Stainless Steel Fasteners Stainless Steel Continuous Hinge Stocked in 6 foot lengths Open Width Thickness Pin Diameter Knuckle Length Length T-04 Part / 6.040.09.200 24698.040.09.680 249 2.00.2 2.80 24606 2.074.20.400 247.074.20 7.860 248 46

Notes

Alaskan Quality is achieved through a rigorous program designed to get the right instructions to the right people, so that a product is fabricated correctly the first time. Since our beginning in 9, the Alaskan Quality Program has been continually analyzed, revised and improved to meet the increasing challenges and complexity of specifications for piping, fittings, and custom fabrication. Our current Quality Program allows us to create an assignment of responsibility for engineering, drafting, layout, purchasing, scheduling, fabrication, examination, documentation and packaging. Thus our goal...conformance to specification...is consistently shared with you, the Purchaser. Alaskan s facilities for radiography, liquid penetrant examination, ultrasonic gaging, hydrotesting and dimensional checking further confirm the quality that the program creates. Our program of proven procedures also enables the certification of parts and pressure vessels with the symbols of UM, U and U2 in accordance with Section VIII of the ASME Boiler and Pressure Vessel Code. Your purchase of Alaskan quality-crafted products will enable us to share with you our experience, knowledge and dependability. Hydrotesting verifies pressure capabilities of pipe and tubing. Heat-treatment stress relieves fittings after forming. Specialized film reader and digital densitometer are used in interpreting radiographic film. Geometric accuracy is checked on all Alaskan fittings. Radiographic inspection checks the integrity of welds.