Compact pumps Series EBP, LD/S, ME

Series information EBP_02_EN Compact pumps Series EBP, LD/S, ME - Overview of products - Executions - Materials - Types of seals - Sectional and dimensional drawings

EBP 25-160 in bronze execution

General Description Compact pumps of the series EBP, LD/S and ME are single-stage normal priming centrifugal pumps in space saving short-build design. Special versions for higher system pressures are available on request. Fields of Application Main field of application for these compact pumps are the conveying of clean and slightly turbid liquids in small devices, systems and machines. Due to the different materials available the conveying of different aggressive liquids in the chemical industry is possible. Our customers uses the compact pumps at the moment for the following applications: - Recirculation of liquids in machines - Integration into industrial washing machines and washers - Air conditioning - Ship building - Water treatment - Pre-heating of combustion engines Operating Data Flow: Total head: Motor power: Connections Degree of protection: IP 55 Casing design pressure: Q up to 90 m³/h H up to 5 m P from 0,12 kw to 22 kw 6 bar (Pumps with higher design pressure are available on request.) Suction and discharge connection of EBP 20-125, 25-125-2, 25-160 and 25-200 are equipped with female threads. Adapters for different dimensions of threads, flange connections or hose connections are available on request. The EBP 20-90 is equipped with a thread for an union nut. The inline pumps EBPI 32-100, EBPI 40-125, EBPI 50-160 and EBPI 65-160 are equipped with flanges according to EN 1092. The pumps ME 90-G, LD/S 26, LD/S 40, LD/S 60, LD/S 0, ME 500 and ME 950 are versions which are available with threaded or hose connection. Motors As motors induction motors with fixed bearing at the drive end, in mounting form IMB35, IMB5 resp. with special shafts are used. The triple phase motors from 0,75 kw are executed in the degree of efficiency class IE3 to EN 60034-30. Motors efficiency class IE4, NEMA Premium or explosion proof executions are available on request. Voltages: for 1~ execution: 230V, 50Hz for 3~ execution depending on pump type: 230/400V, 50Hz or 400/690V, 50Hz 265/460V, 60Hz or 460V, 60Hz other voltages/frequencies as well as DC or hydraulic motors are available on request. Degree of protection: IP 55 Direction of rotation: EBP 20-125, EBP 25-125-2, EBP 25-160, EBP 25-200, ME 90, LD/S 40, LD/S 60, LD/S 0 - Clockwise viewed onto motor fan. EBP 20-90, LD/S 26, ME 500, ME 950 - Counter clockwise viewed onto 1 motor fan.

Type Code Series: Materials Part EBP-A 25-125-2 - XX Series Execution of impeller Nominal size of discharge connection Nominal size of impeller Number of stages Execution code ME 90/6 - G-01-50 LD/S 26 - G-025-50 Series Pump size Type of connection Motor power- frequency EBP, LD/S, ME EBPI EBPL EBPN, LDN/S, MEN EBPNI Execution of impeller: - Standard version A,B,... - Impeller with special geometry - Standard version - Pump with inline casing - Pump with bearing bracket - Pump with stub shaft and standard motor - Pump with stub shaft, standard motor and inline casing Nominal size of discharge connection: See dimensional drawing, characteristic curve, resp. Type of connection: - Hose connection G - Thread Nominal size of impeller: Nominal size of impeller in millimetres Number of stages: - Single stage 2-2 stages Motor power / frequency: 025-50 - 0,25 kw - 50 Hz etc. Execution code: XX Standard - Y110 - Standard version - Special versions (e.g. special connections, etc.) Material code Y201 Y301 Y302 Y501 (a) Y601 Y602 Y505 Y02 Casing Cast iron JL1040 Aluminium Bronze Aluminium bronze Stainless steel Duplex Super duplex High alloy SS PVC Impeller Cast iron JL 1030 Cast iron JL 1030 Bronze Aluminium bronze Stainless steel Duplex Super duplex High alloy SS Stainless steel Shaft Duplex Chromium steel Duplex Super duplex High alloy SS Duplex Additionally for EBPL Bearing bracket Aluminium 2 (a) Y501 is the standard version for all pumps Series LD/S and ME.

Basisaus-führung Bronze Aluminium bronze Stainless steel Impeller options Duplex Super duplex High alloy SS Y110 X X X X X X Y201 X X X X X X Y301 X X X X X Y302 X X X X Y501 X X X Y601 X X Y602 X Other materials are available on request. Material German description Cast material German material code EU - description number EU - material code number ASTM - UNS - description Cast iron GG 20 X 0.6020 EN-GJL-200 JL 1030 A4 - Grade 30 GG 25 X 0.6025 EN-GJL-250 JL 1040 A4 - Grade 35 Aluminium G-AlSi10Mg X 3.231 AB-AlSi10Mg AB-43000 A 13600 Bronze G-CuSn10 X 2.1050.01 CuSn10-C CC40K-GS B505 - C90700 Aluminium bronze G-CuAl10Ni X 2.0975.01 CuAl10 Fe5Ni5-C CC333G-GS B505 - C95500 Chromium steel X20Cr13 1.4021 X20Cr13 1.4021 A276 - S4200 Stainless steel - 316 G-X5CrNiMo 19-11-2 X 1.440 GX5CrNiMo 19-11-2 1.440 A351 - CFM - J92900 G-X2 CrNiMoN 22-5-3 X 1.4470 GX2 CrNiMoN 22-5-3 1.4470 A995-4A -J92905 Duplex G-X2 CrNiMo- CuN 25-6-3-3 X 1.4517 GX2 CrNiMo- CuN 25-6-3-3 1.4517 A995-4A -J93372 X2 CrNiMoN 22-5-3 1.4462 X2 CrNiMoN 22-5-3 1.4462 A276 -S3103 Super duplex G-X2 CrNiMoN 26-7-4 X2CrNiMo- CuWN 25-7-4 X 1.4469 1.4501 GX2 CrNiMoN 26-7-4 X2CrNiMo- CuWN 25-7-4 1.4469 A995-5A - J93404 1.4501 A276 - S32760 High alloy SS G-X2CrNiMoCu N 20-1-6 X1CrNiMoCuN 20-1-7 X 1.4557 1.4547 GX2CrNiMoCuN 20-1-6 X1CrNiMoCuN 20-1-7 1.4557 1.4547 A744-6MO - J93254 A276-6MO - S31254 Seal versions Seal code Part Z101 Z102 Z103 Z104 Z105 Z113 Z114 Z141 Z142 Rotating ring Carbon - A Carbon - A Carbon - A SiC - Q SiC - Q SiC - Q SiC - Q Carbon - B Carbon - B Stationary seat SiC - Q SiC - Q SiC - Q SiC - Q SiC - Q SiC - Q SiC - Q Ceramics - V Ceramics - V Elastomer NBR -P FKM -V EPDM - E FKM - V EPDM - E FKM - V EPDM - E NBR - P FKM - V Spring 1.4571 - G 1.4571 - G 1.4571 - G 1.4571 - G 1.4571 - G Hast. C - M Hast. C - M 1.4301 - F 1.4571 - G Metal parts 1.4571 - G 1.4571 - G 1.4571 - G 1.4571 - G 1.4571 - G Hast. C - M Hast. C - M 1.4301 - F 1.4571 - G Remark Rubber bellow seal for pressure up to 12 bar. Rubber bellow seal for pressure up to 12 bar. Rubber bellow seal for pressure up to 12 bar. Rubber bellow seal for pressure up to 12 bar. Rubber bellow seal for pressure up to 12 bar. Rubber bellow seal for pressure up to 12 bar. Rubber bellow seal for pressure up to 12 bar. Rubber bellow seal for pressure up to 6 bar. Rubber bellow seal for pressure up to 6 bar. Other seal versions are available on request. 3

Characteristic curve EBP, LD/S and ME (EPBI ) 100 0 H [m] 50 40 30 50Hz - 1500min -1 100 60Hz - 100min -1 0 H [m] 50 40 30 20 10 25-200 on request 20 10 25-160 25-200 25-125-2 on request 5 4 3 2 25-160 32-100 20-125 25-125-2 40-125 50-160 65-160 5 4 3 2 32-100 20-125 40-125 50-160 65-160 1 1 1 2 3 4 5 10 20 50 100 Q [m³/h] 1 2 3 4 5 10 20 50 100 Q [m³/h] 100 0 H [m] 50 40 30 20 10 5 4 3 50Hz - 3000min -1 100 60Hz - 3600min -1 0 20-90 20-125 25-160 25-200 32-100 25-125-2 40-125 on request 65-160 50-160 H [m] 50 40 30 20 10 5 4 3 20-90 25-160 25-125 25-200 32-100 25-125-2 40-125 on request 50-160 65-160 2 2 1 1 1 2 3 4 5 10 20 50 100 Q [m³/h] 1 2 3 4 5 10 20 50 100 Q [m³/h] 100 0 H [m] 50 40 30 20 50Hz - 3000min -1 100 60Hz - 3600min -1 0 H [m] 50 40 30 20 10 LD/S 0 10 LD/S 0 5 4 3 2 ME 90 ME 110 LD/S 26 LD/S 40 ME 500 LD/S 60 ME 950 5 4 3 2 ME 90 ME 110 LD/S 26 LD/S 40 ME 500 ME 950 LD/S 60 1 1 1 2 3 4 5 10 20 50 100 Q [m³/h] 1 2 3 4 5 10 20 50 100 Q [m³/h] 4

Dimensional drawing EBP 25-160 and 25-200 with motor IP 55 e1 s1 b1 f1 DND pipe thread acc. to DIN 2999 ~L b DNS pipe thread acc. to DIN 2999 b4 h2 h1 b3 x a1 a Type Motor min-1 DNS DND a b a1 b1 b3 b4 e1 f1 h1 h2 s1 x L kg EBP 20-125 EBP 25-160 EBP 25-200 0,06/0,07 kw 10 71 90 91 110 56 6 112 2 0,09/0,11 kw 1500/100 10 0,12/0,14 kw 11 0,1/0,22 kw 0 100 100 125 63 7 105 306 11 0,25/0,30 kw IG ¾ IG ¾ 50 75 9 5 103 12 0,37/0,44 kw 13 3000/3600 90 112 115 13 71 110 311 0,55/0,66 kw 14 0,75/0,9 kw 17 100 125 125 160 0 115 335 1,1/1,3 kw 1 0,37/0,44 kw 90 112 115 13 71 133 339 1 0,55/0,66 kw 1500/100 20 100 125 125 160 0 13 363 0,75/0,9 kw 21 0,55/0,66 kw 90 112 115 13 71 133 339 1 0,75/0,9 kw IG 1 IG 1 52 0 115 115 100 20 125 125 160 0 13 363 1,1/1,3 kw 3000/3600 100 21 1,5/1, kw 130 30 25 140 12 90 10 144 2,2/2,6 kw 125 155 395 2 3,0/3,6 kw 140 160 175 200 100 11 151 425 31 0,55/0,66 kw 29 125 125 160 0 165 425 0,75/0,9 kw 100 30 1500/100 1,1/1,3 kw 130 442 33 1,5/1, kw 140 12 90 10 171 35 125 155 457 2,2/2,6 kw IG 1 IG 1 60 110 150 150 130 37 3,0/3,6 kw 160 200 100 11 17 47 40 175 4,0/4, kw 3000/3600 190 235 112 15 504 49 140 5,5/6,6 kw 12 62 216 21 260 132 204 550 7,5/9,0 kw 6 Other dimensional drawings on request. The weights are for the material execution Y110. 5

Dimensional drawing EBPN 25-160 and 25-200 with motor IP 55 e1 s1 b1 f1 DND pipe thread acc. to DIN 2999 ~L b DNS pipe thread acc. to DIN 2999 b4 h2 h1 b3 x a1 a Type Motor min-1 DNS DND a b a1 b1 b3 b4 e1 f1 h1 h2 s1 x L kg EBPN 20-125 EBPN 25-160 EBPN 25-200 0,06/0,07 kw 13 71 90 91 110 56 6 112 2 0,09/0,11 kw 1500/100 13 0,12/0,14 kw 14 0,1/0,22 kw 0 100 100 125 63 7 105 306 14 0,25/0,30 kw IG ¾ IG ¾ 50 75 9 5 103 15 0,37/0,44 kw 16 3000/3600 90 112 115 13 71 110 311 0,55/0,66 kw 17 0,75/0,9 kw 22 100 125 125 160 0 115 335 1,1/1,3 kw 23 0,37/0,43 kw 90 112 100 125 71 133 359 21 0,55/0,63 kw 1500/100 25 100 125 125 160 0 13 421 0,75/0,6 kw 26 0,55/0,63 kw 90 112 100 125 71 133 359 21 0,75/0,6 kw IG 1 IG 1 52 0 115 115 100 25 125 125 160 0 13 421 1,1/1,27 kw 100 26 3000/3600 1,5/1,75 kw 130 32 140 12 90 10 144 466 2,2/2,55 kw 125 155 35 3,0/3,45 kw 140 160 175 200 100 11 151 40 42 0,55/0,63 kw 33 125 125 160 0 165 445 0,75/0,6 kw 100 34 1500/100 1,1/1,27 kw 130 39 1,5/1,75 kw 140 12 90 10 171 47 41 125 155 2,2/2,55 kw IG 1 IG 1 60 110 150 150 130 43 3,0/3,45 kw 160 200 100 11 17 532 46 175 4,0/4,55 kw 3000/3600 190 235 112 15 549 55 140 5,5/6,3 kw 12 72 216 10 260 132 204 615 7,5/,6 kw 7 6

x Dimensional drawing EBP 20-90 and 25-125-2 with motor IP 55 a1 s1 b1 f1 ~L e1 DND b DNS h2 h1 b3 b4 Type Motor min-1 DNS DND a b a1 b1 b3 b4 e1 f1 h1 h2 s1 x L kg EBP 20-20 0,25/0,25 kw 3000/3600 AG 1¼ AG 1¼ 45 37 90 112 0 119 115 13 71 130 7 139 304 10 b1 f1 s1 a ~L DND h2 DNS b3 h1 x a1 e1 Type Motor min-1 DNS DND a a1 b1 b3 e1 f1 h1 h2 s1 x L kg EBP 25-125-2 0,12/0,14 kw 1 0 100 100 125 63 7 220 456 0,1/0,22 kw 19 0,25/0,30 kw 1500/100 21 90 112 115 13 71 225 461 0,37/0,44 kw 23 0,55/0,66 kw 100 125 125 160 0 230 45 25 0,55/0,66 kw 90 112 115 13 71 225 461 23 IG 1¼ IG 1 111 200 120 0,75/0,9 kw 25 125 125 160 0 230 45 1,1/1,3 kw 100 26 1,5/1, kw 3000/3600 130 502 30 140 12 90 10 236 2,2/2,6 kw 125 155 517 33 3,0/3,6 kw 160 200 100 11 243 547 36 140 175 4,0/4, kw 190 235 112 12 250 564 45 7

Dimensional drawing EBPI 32-100, EBPI 40-125, EBPI 50-125 and EBPI 65-160 with motor IP 55 DNS ~b2 ~a K ~k ~b1 Flansche/Brides Löcher/Trous DN PN D k d4 d1 Anz./nom. 32 16 140 100 7 19 M16 4 h2 40 6 140 100 0 15 M12 4 h 40 16 150 110 19 M16 4 h1 50 16 15 125 102 1 M16 4 d4 65 16 15 145 122 1 M16 (+4) DND Type Motor min-1 DNS DND ~a ~b1 ~b2 h h1 h2 ~k kg EBPI 32-100 EBPI 40-125 EBPI 50-160 EBPI 65-160 0,12/0,14 kw 1500/100 0,1/0,21 kw 0,25/0,3 kw 32 (a) 32 (a) 70 70 220 110 110 19 3000/3600 0,37/0,44 kw 20 110 256 0,55/0,66 kw 21 0,12/0,14 kw 1,5 10 263 0,1/0,21 kw 1500/100 19 0,25/0,30 kw 119 270 22 0,25/0,30 kw 10 263 19 40 40 73 2 250 137,5 112,5 0,37/0,44 kw 20,5 119 270 0,55/0,66 kw 3000/3600 21 0,75/0,90 kw 24,5 12 297 1,10/1,32 kw 25 0,25/0,3 kw 33,5 10 4 0,37/0,44 kw 36 0,55/0,66 kw 1500/100 36,5 119 512 0,75/0,90 kw 37,5 1,10/1,32 kw 12 529 43,5 0,75/0,90 kw 36 50 50 2 103 119 340 170 170 512 1,10/1,32 kw 36,5 1,5/1, kw 529 42,5 12 2,2/2,6 kw 3000/3600 544 44,5 3,0/3,6 kw 166 574 49 4,0/4, kw 55,5 170 591 5,5/6,6 kw 71,5 0,25/0,3 kw 33,5 10 4 0,37/0,44 kw 36 0,55/0,66 kw 36,5 119 512 0,75/0,90 kw 1500/100 37,5 1,10/1,32 kw 529 43,5 12 1,5/1, kw 544 45,5 2,2/2,6 kw 65 65 2 103 166 340 170 170 574 50,5 1,5/1, kw 529 42,5 12 2,2/2,6 kw 544 44,5 3,0/3,6 kw 3000/3600 166 574 49 4,0/4, kw 55,5 170 591 5,5/6,6 kw 71,5 (a) Flanges DN 40 - PN 6, DN 40 - PN 16, resp. are available on request. Other dimensional drawings on request. The weights are for the material execution Y103. 100 235 1,5 1,5

Dimensional drawing EBPNI 32-100, EBPNI 40-125, EBPNI 50-125 and EBPNI 65-160 with motor IP 55 Type Motor min-1 DNS DND ~a ~b1 ~b2 h h1 h2 ~k kg EBPNI 32-100 EBPNI 40-125 EBPNI 50-160 EBPNI 65-160 0,12/0,14 kw 1500/100 21,5 0,1/0,20 kw 100 260 21,5 0,25/0,29 kw 32 (a) 32 (a) 70 70 220 110 110 22 3000/3600 0,37/0,43 kw 23,5 110 26 0,55/0,63 kw 24,5 0,12/0,14 kw 21,5 10 2 0,1/0,20 kw 1500/100 22 0,25/0,29 kw 119 300 25,5 0,25/0,29 kw 10 2 22 40 40 73 2 250 137,5 112,5 0,37/0,43 kw 24 119 300 0,55/0,63 kw 3000/3600 24,5 0,75/0,6 kw 29,5 12 337 1,10/1,27 kw 30 0,25/0,3 kw 36,5 10 511 0,37/0,44 kw 39 0,55/0,66 kw 1500/100 41,5 119 542 0,75/0,90 kw 42,5 1,10/1,32 kw 12 569 50,5 0,75/0,90 kw 41 50 50 2 103 119 340 170 170 542 1,10/1,32 kw 41,5 1,5/1, kw 569 49,5 12 2,2/2,6 kw 3000/3600 54 51,5 3,0/3,6 kw 166 624 60 4,0/4, kw 66,5 170 641 5,5/6,6 kw 2,5 0,25/0,3 kw 36,5 10 511 0,37/0,44 kw 39 0,55/0,66 kw 41,5 119 542 0,75/0,90 kw 1500/100 42,5 1,10/1,32 kw 569 50,5 12 1,5/1, kw 569 52,5 65 65 2 103 340 170 170 2,2/2,6 kw 166 54 61,5 1,5/1, kw 569 49,5 12 2,2/2,6 kw 54 51,5 3,0/3,6 kw 3000/3600 166 624 60 4,0/4, kw 66,5 170 641 5,5/6,6 kw 2,5 (a) Flanges DN 40 - PN 6, DN 40 - PN 16, resp. are available on request. Other dimensional drawings on request. The weights are for the material execution Y103. EBPI 32-100 in schock proved execution 9

Dimensional drawing LD/S 26, LD/S 40, LD/S 60, LD/S 0, ME 90/6, ME 500/12 and ME 950/10 with motor IP 55 a ~k a1 e1 ø s1 b1 f1 Execution -G with threaded connection ME 90/6 LD/S 40 LD/S 60 LD/S 0 b DND x e1 a1 ø s1 b1 f1 LD/S 26 ME 500/12 ME 950/10 b3 b b4 h2 g1 h2 h3 h1 h1 h3 a ~k DNS x DNS DND g1 b4 a Execution with hose connection b DND ø h2 DNS ø Type Motor min-1 KK (a) DNS DND a b a1 b1 b3 b4 e1 f1 g1 h1 h2 h3 ~k s1 x kg ME 90/6 0,1 kw LD/S 26 40 40 0,25 kw links LD/S 26-G AG 1¼ IG 1 LD/S 40 50 40 0,55 kw links LD/S 40-G IG 1¼ IG 1¼ LD/S 60 50 40 1,10 kw links LD/S 60-G 3000/3600 IG 1¼ IG 1¼ LD/S 0 60 50 1,50 kw links LD/S 0-G IG 1½ IG 1¼ ME 500/12 63 63 3,00 kw oben ME 500/12-G IG 2 IG 1½ ME 950/10 75 63 5,50 kw rechts ME 950/10-G IG 2½ IG 2 links AG ½ AG ½ 51 21 0 100 63 109 100 125 125 63 79 63 212 7 69 6,5 2 55 90 112 73 119 115 13 141 71 102 73 277 7 120 10,5 3 67 90 112 75 119 115 13 141 71 125 77 293 7 11 14 3 67 100 125 75 119 125 156 159 0 125 77 33 9 123 1,5 36 60 100 125 7 119 125 156 159 0 127 2 351 9 122 23,5 67 7 125 140 120 110 155 170 176 90 125 112,5 332 10 109 34 75 7 140 190 170 111 176 226 222 112 125 112,5 407 12 123 55 (a) Position of terminal box seen onto fan. Other motor ratings / pump versions are available on request. 10

Dimensional drawing ME 110/40 with motor IP 55 a ~L DNS b b4 DND h2 h1 x a1 s1 e1 b1 f1 Type Motor min-1 KK (a) DNS DND a b a1 b1 b4 e1 f1 h1 h2 s1 x ~L kg ME 110/40 0,37 kw 1500/100 90 112 110 115 13 71 7 67 269 11 1,1 kw 3000 links IG ¾ IG ¾ 35 60 100 125 119 125 156 0 100 9 72 293 1 2,2 kw 3600 125 140 130 155 170 90 10 7 325 25 (a) Position of terminal box seen onto fan. Other motor ratings / pump versions are available on request. EBP 40-200 material duplex, high pressure execution for system pressure 0 bar 11

Examples for special executions EBP for mobile useage DNS EBP with hydraulic motor DND DNS EBPL with free shaft end DND 12

Exploded view EBP 20-125, 25-160 and 25-200 Exploded view EBPI 32-100, 40-125, 50-160 and 65-160 Part-No. Description 101.10 Inline casing 102.10 Casing 161.10 Casing cover 230.10 Impeller 433.10 Mechnical seal 01.10 Motor with special shaft 13

Exploded view EBPN 20-125, 25-160 and 25-200 Exploded view EBPNI 32-100, 40-125, 50-160 and 65-160 14 Part-No. Description 101.10 Inline casing 102.10 Casing 161.10 Casing cover 230.10 Impeller 433.10 Mechanical seal 211.10 Stub shaft 515.10 Fixing ring 00.10 Standard motor

Exploded view EBP 20-90 and EBP 25-125-2 Part-No. Description 101.10 Casing 106.10 Suction casing 107.10 Discharge casing 161.10 Casing cover 230.10 / 11 Impeller 433.10 Mechanical seal 01.10 Motor with special shaft 15

Exploded view LD/S 26, LD/S 40, LD/S 60, LD/S 0, ME 500/12 and ME 950/10 Part-No. Description 101.10 Casing 161.10 Casing cover 230.10 Impeller 433.10 Mechanical seal 01.10 Motor with special shaft ME 950/10-G - 550-50 in standard execution with electric motor 5,5 kw 16

Exploded view ME 110/40 Part-No. Description 101.10 Casing 161.10 Casing cover 230.10 Impeller 433.10 Mechanical seal 01.10 Motor with special shaft ME 110 with 1,1 kw electric motor 17

Edition 02/2017 Specifications subject to change without notice