Page 1 of 6 TABLE OF CONTENTS Double Acting (DA) Models and Optional Adders Page 2 Spring Return (SR) Models and Optional Adders Page 2 Additional Actuator Options; Page 2 NAMUR Mounting Plate Position Stop Bolts SolpaQ, without Tubing or Tubed and Mounted Stainless Steel NAMUR Accessory Mounting Brackets High Visibility Position Indicator Switches: NEMA 4 & 4x Plastic; NEMA 4, 4x, 7 & 9 Aluminum; NEMA 4 & 4x Stainless and Efector Solid State. Valve Mounting Hardware; Page 3 XYTRQ Valve Mounting Hardware (Shaft Adaptor & Universal Mounting Plate) XYTRQ Kits for Conversation to Morin Output Drive. Open Type Bracket & Coupling Kits; Butterfly Valves - Keyed or Square Shaft Butterfly Valves - Double "D" Shaft Ball Valves with Mounting Pad Plug Valves - Flange Mounting XYTRQ Reduction Squares Page 4 Seal & Bushing Spare Parts Kits Page 4 SpringpaQs Replacement or Spare Part Kits Page 4 Notes & Clarifications Page 5 QTRPAQ Product Identification Page 6 All Prices in U. S. Dollars - All Shipments FOB Tomball, Texas, USA - Prices Subject to Change Without Notice - Copyright QTRCO 2004 = Consult Factory - - - = Not Applicable - Subject to QTRCO Terms & Conditions of Sale - Minimum Purchase Order Value $50 Net
Page 2 of 6 DOUBLE ACTING (DA) ACTUATORS SPRING RETURN (SR) ACTUATORS STANDARD CONSTRUCTION OPTIONAL ADDERS STANDARD CONSTRUCTION OPTIONAL ADDERS ACTUATOR LIST HIGH TEMPERATURE VITON ACTUATOR LIST HIGH TEMPERATURE VITON MODEL PRICE HT 450 O-RINGS MODEL PRICE HT 450 O-RINGS Note 1 Note 2 Note 3 Note 4 Note 1 Note 2 Note 3 Note 4 X03DA $148 $75 $29 X03SR30/80-S1 $168 $75 $29 X04DA $281 $110 $54 X03SR100-S1 $195 X05DA $371 $122 $65 X04SR25/80-S1 $321 X07DA $149 $65 X04SR100-S1 $110 $54 $359 X10DA $163 $78 X04SR60/80-S2 X12DA $728 $100 X05SD25/40-S1 $411 X14DA $788 $108 X05SR25/80-S1 $450 $122 $65 X05SR100-S1 $528 X05SR60/80-S2 X07SR40/80-S1 X07SR100-S1 X10SD30/50-S2 X10SR40/80-S2 X10SR100-S2 X12SR20/80-S1 X12SR100-S1 X14SD30/40-S1 X14SR20/80-S1 X14SR100-S1 $149 $65 $163 $78 $786 $100 $851 $108 Additional Actuator Options NAMUR ACCESSORY POSITION STOP BOLT(S) SolpaQ NAMUR POSITION SWITCHES - Note 12 MOUNTING PLATE EXTENDED SECOND NO TUBE TUBED MTG. BKT. INDICATOR N 4 & 4x N 4, 4x, 7 & 9 N 4 & 4x N 4 Note 5 Note 6 Note 7 Note 8 Note 9 Note 10 Note 11 PLASTIC ALUM. STAINLESS EFECTOR 03DA $54 8 03SR 04DA 04SR $54 8 05DA 05SR & SD $54 - - 8 07DA 07SR $70 8 10DA 10SR & SD $70 - - 8 12DA 12SR $94 8 $26 $167 14DA 14SR $94 - - 8 $26 $167
Page 3 of 6 XYTRQ VALVE MOUNTING HARDWARE CONVERSION KIT TO MORIN MALE SHAFT & MOUNTING PATTERN ACTUATOR SHAFT ADAPTOR UNIVERSAL MTG PLATE MORIN QTRCO LIST MODEL BLANK + MILLED BLANK + TAPPED ACTUATOR KIT PRICE Note 22 Note 19 Note 20 Note 21 Note 22 MODEL NUMBER 03 $55 $35 $62 03 003 Q03M003 $83 04 / 05 $38 $72 $35 $62 03 006 / 012 Q03M006 $83 07 / 10 $50 $87 $70 04 / 05 006 / 012 Q05M006 $83 12 / 14 $64 $102 NA NA 04 / 05 023 & Up Q05M023 $83 07 / 10 006 / 012 Q10M006 07 / 10 023 & Up Q10M023 $120 $120 OPEN TYPE BRACKET & COUPLING KITS (not flush mounting) BUTTERFLY VALVES - KEYED OR SQUARE SHAFT 2-3" 4-6" 8" 10" 12-14" 16" 18" 20" 24" - - - 03 7 $167 - - - - - - - - - - 04 / 05 $167 $178 $224 - - - - - - - - - 07 / 10 - $256 $300 5 $367 - - - - - - - 12 / 14 - - $423 $501 $535 $612 $691 $858 $947 - - - BUTTERFLY VALVES - DOUBLE "D" SHAFT 2-3" 4-6" 8" 10" 12-14" 16" 18" 20" 24" - - - 03 7 $139 - - - - - - - - - - 04 / 05 $167 $178 2 - - - - - - - - - 07 / 10 - $245 $279 $312 $346 - - - - - - - 12 / 14 - - $402 $446 $513 - - - - - - - BALL VALVES with MOUNTING PAD - STANDARD PORT (FULL PORT) 1/4-1 1/4" (1") 1 1/2-2" (1 1/2") 2 1/2-3" (2") 4" (3") 6" (4") 8" (6") 10" (8") - - 03 7 $167 $189 - - - - - - 04 / 05 $174 $189 $224 $256 $279 - - - - 07 / 10 - $245 $279 $312 $346 - - - - 12 / 14 - - - $446 $524 $612 $691 - - PLUG VALVES - FLANGE MOUNTING 1/2-2" 2 1/2-3" 4" 6" 8" 10" - - - - 03 $189 $224 - - - - - - - - 04 / 05 2 $256 $300 - - - - - - - 07 / 10 $300 5 $367 $402 - - - - - - 12 / 14 - $446 $524 $602 $679 $891 - - - -
Page 4 of 6 QTRPAQ REDUCTION SQUARES (to reduce actuator output drive) PART NUMBER Note 17 RS1109 RS1409 RS1410 RS1411 RS1412 RS1712 RS1714 RS2216 RS2217 RS2722 RS3627 OUTSIDE SQUARE INSIDE SQUARE LENGTH LIST PRICE INCH / mm / F# INCH / mm / F# INCH / mm $9 0.433" / 11mm / F04 0.355" / 9mm / F03 0.433" / 11mm $11 0.355" / 9mm / F03 0.394" / 10mm 0.433" / 11mm / F04 0.472" / 12mm $20 0.670" / 17mm / F07 0.472" / 12mm 0.670" / 17mm 0.670" / 17mm / F07 0.551' / 14mm / F05 0.670" / 17mm $55 0.867" / 22mm / F10 0.630" / 16mm 0.867" / 22mm 0.867" / 22mm / F10 0.670" / 17mm / F07 0.867" / 22mm 1.064" / 27mm / F12 0.866" / 22mm / F10 1.064" / 27mm $23 1.418" / 36mm / F14 1.064" / 27mm / F12 1.418" / 36mm SPRINGPAQS CHANGE OUT & SPARE PART KITS SEAL & BUSHING SPARE PARTS KITS 03SR 04 / 05SR SPRING RETURN STANDARD (180F) OPTIONAL HT450 SPRING GROUP LIST PRICE 30/80 8 03DA & SR 100 $247 04DA & SR 40/80 $244 05DA, SR & SD 100 $276 07DA & SR 40/80 $359 10DA, SR & SD 07 / 10SR 100 $393 12DA & SR 20/80 $899 14DA, SR & SD 12 / 14SR 100 $1,004 Because the SpringpaQs are pre-compressed, it is not practical or advisable to change springs in the field. To simplify changing spring rates, QTRCO offers to "trade" complete SpringpaQs with our Distributors. SpringpaQs include piston o-rings & wiper rings. Racks will not be included. Existing rack must be removed from the SpringpaQ & then assembled to the new SpringpaQ. Standard o-ring material will be provided. Advise if other material is required and obtain pricing from QTRCO. SEALS + BUSH SEALS + BUSH Note 18 Note 19 Note 18 Note 19 $36 $113 $105 $182 $54 $168 6 $270 $58 $178 $171 $291 $68 $275 $206 $413 $73 $286 $230 $443 $116 $647 $650 $1,375 $124 $663 $658 $1,451
Page 5 of 6 NOTES & CLARIFICATIONS 1. Standard Actuator Specification: Operating Temp. Range: -20 F to +180 F ( -29 C to +82 C) Operating Media: Air, Water or Gas (Oil Optional) Maximum Rotation Output: CW = 95 & CCW = 0 (viewed from above) Standard Media Port Size: ¼ NPT Max. Operating Pressure: 120 psig Max. Static Pressure: 200 psig Soft Parts: RPTFE O-Rings: EPDM Valve Attachment Configuration: ISO 5211 Top & Bottom Accessory Attachment: 03 thru. 05 DA & SR NAMUR 80-30-20 standard. 07 and 10 DA & SR NAMUR 80-30-20 standard. 12 and 14 DA & SR NAMUR 130-30-30 standard. All models are supplied with 4mm NAMUR slot & M6 tapped hole provided by means of the QTRCO NAMUR Drive Adaptor. 2. Prices each for standard construction actuator only. Price does not include any optional adders, accessories or mounting hardware. 3. Price shown for HT450 factory modification is designed for continuous service from -20 F to +400 F (+204 C) and short excursions to +450 F (+232 C). Includes Viton seals, HT bushings and HT lubrication. 4. Replaces standard EPDM o-rings with Viton o-rings. Caution: for use with operating air containing special additives. This is not the high temperature service option as standard bushings are used (see notes 3). Many other seal materials are also available. 11. Moniteur Model IMYZ-D000 with black / yellow indicator and mounting for 80x30x30 or 130x30x30. 12. QTRCO offers many different switch configurations. The following is information on those listed. NEMA 4 & 4x Plastic supplied as QTRCO SwitchpaQ CR-Series with two SPDT mechinical switches rated 5A @ 250vAC & 0.5A @ 24vDC, six position terminal strip, one 1/2" NPT cable entry, a red-green position indicator plus an 80x30x20 & 130x30x30 NAMUR mounting bracket. NEMA 4, 4x, 7 & 9 Aluminum supplied as Moniteur Sentinel AMYB-E120. Note: All models requires NAMUR Mounting Bracket for assembly to actuator. See note 10. NEMA 4 & 4x Stainless Steel supplied as QTRCO SwitchpaQ CS-Series with two SPDT mechinical switches rated 5A @ 250vAC & 0.5A @ 24vDC, six position terminal strip, two 1/2" NPT conduit connections plus a redgreen position indicator. Note: All models requires NAMUR Mounting Bracket for assembly to actuator. See note 10. NEMA 4 Efector supplied as puck U20126 and switch IN0117 for Models 03 through 10. Puck U20114 and switch IN0117 for models 12 and 14. Note: Cable, if required, is additional. 13. Blank stainless steel output drive sleeve adaptor. Requires machining to fit valve stem. Caution: not available to fit all valve stems. Consult QTRCO. 5. Supplied as Standard and required for models 03 thru. 05 to convert actuator top from ISO 5211 to NAMUR 80-30-20 configuration. All other models, see note 1. 6. Price each for additional length position stop bolt for 0 to 100% travel adjustment in given direction. Caution: when used on spring return models to limit the spring stroke, additional care must be taken to fully back out position stop bolt before any disassembly of the actuator. 7. Second position stop bolt of standard length for dual stroke adjustment. For full adjustment of both stop bolts, see note 6 and add additional price for each. 8. NAMUR solenoid mounting plate supplied in stainless steel without tubing, fittings or assembled to actuator. 14. Stainless steel output drive sleeve adaptor with machining to fit valve stem. Caution: not available to fit all valve stems. Consult QTRCO. 15. Stainless steel Universal Mounting Plate with fasteners to attach to actuator. Requires machining to adapt actuator mounting pattern to the valve mounting pattern. Allows direct low profile attachment on most valves. UMP supplied complete with fasteners to attach to specified actuator model. 16. Stainless steel Universal Mounting Plate with machining to fit valve. Caution: not available to fit all valves. Consult QTRCO. 17. Nickel coated carbon steel. See drawing for additional information. 9. NAMUR solenoid mounting plate supplied in stainless steel and fully assembled to actuator using stainless tubing and fittings. 18. Contains all necessary seals (only), of the stated type, to rebuild one actuator. Does not include bushings. 10. Price for use when purchased with actuator. Cast stainless steel NAMUR bracket for attachment of NAMUR accessories. Supplied in 80x30x20 or 130x30x30 configurations. 19. Contains all necessary seals and bushings, of the stated type, to rebuild one actuator.
Page 6 of 6 XYTRQ PRODUCT IDENTIFICATION Actuator series. X = XYTRQ Series, Female output drive. Anodized & Coated body with one piece cylinder(s) with Stainless Steel Output Shaft & Rack(s). Actuator size. 03 = 03. 04 = 04. etc. X XX XX -X -X -XXXXX -DES Additional description (see note B below). Blank = None. Temperature options. Blank = Standard -20 to +180F (supplied with EPDM seals & bushings). HT450 = Optional -20 to +400F (supplied with Viton seals & HT bushings). Chemical/temperature service options. Blank = Standard EPDM seals. V = Viton seals. B = Buna seals. S = Silicon seals. Spring set from torque table. Blank = Double acting configuration. S1 = Spring set -1. S2 = Spring set -2. etc. Actuator configuration. DA = Double acting, standard. SR = Spring return, standard (see note A below). SD = Spring return, one SR PowerpaQ and one DA PowerpaQ (see note A below). Example: X03DA-HT450 = XYTRQ Series female drive, 03 size, double acting, 80 psig supply pressure, with 400F high temperature bushings and Viton seals. Notes: A. Unless otherwise specified, all spring return models will be supplied as "Fail Clockwise or Close" as viewed from above. B. Additional options defined by their description.