Cutting edge sealing technology

Cutting edge sealing technology

Our talents are committed everyday to the creation of cutting edge technologies for any sealing need. Seal X, in case of sealing.

SECTIONS OF THE CATALOGUE 1 SEAL X - THE SEALING BRAND 06 2 GASKETS 08 3 PACKINGS 28 4 RUBBER AND URETHANE 56 5 HIGH TEMPERATURE 58

the SEALING Brand Seal X has been manufacturing custom gaskets, seals and rubber components since early 80 s. We have worked with many different national and international companies in a variety of sectors and industries; from advising on product design and development for sealing applications, to shipping large product volume to our customers. Technical Expertise Over the last 30 years we have developed technical expertise in advising companies on the best ways to guarantee that their products are effectively sealed and safe under pressure. Our vast knowledge of gasket materials, design, and production, give us a competitive advantage in the engineering of new products, or installation of new facilities. Experience We at Seal X have professional knowledge in changing conditions and environments. For over 30 years we have produced gaskets to operate in both subzero and extremely high-temperature ranges. Our products can be used in the presence of extreme chemicals and corrosives elements. We are your total solutions provider in the fluid sealing industry. Design & Prototype We work directly with our customers and advise on product design and development. We can provide custom prototypes and samples in different materials to help customers decide the product that will best meet their needs. Delivery / Shipping Seal X will ship Worldwide meeting clients requirements. Customer Service Seal X takes pride in placing customers first and committed to providing the highest quality products. Find out more about our Consulting Services Technology Seal X takes pride on using cutting edge technology giving cost effective solutions. Seal X is ISO 9001:2008 certified

GASKETS From compound asbestos free and PTFE sheets, our sealing solutions. COMPRESSED SYNTHETIC FIBRE JOINTING SHEETS Seal X offers a number of asbestos free synthetic fibre jointing sheets designed for a wide range of applications required for specific sealing solutions. A wide range of grades are available for many different applications. The jointing can be supplied as a sheet or cut gaskets, both supplied in either standard or non-standard dimensions. PTFE PRODUCTS Seal X offers a comprehensive range of modified and expanded PTFE sealing products designed for applications where chemical resistance is paramount or where food safety is a requirement. Our modified PTFE is reinforced with heat resistant filler. The modification of the molecular structure of the polymer and a special production process that determines the isotropic orientation of the components in the plane of the gasket, form the basis of the outstanding mechanical characteristics of this material that combine with the already wellknown excellent chemical properties of the PTFE. The seal capacity is excellent at low compression and at elevated temperatures. Seal X products are recommended for reducing leakages with chemically aggressive substances. These products are ideal for the chemical, petro-chemical, paper mill, oil, gas, food, and pharmaceutical applications. We strive to provide customers with leading solutions and high performance products to suit all specific needs. Please contact our Technical Sales Team INDEX OF GASKETS SX 2200 10 SX 2201 11 SX 2202 12 SX 2203 13 SX 2204 14 SX 2205 15 SX 2206 16 SX 2207 17 SX 2208 18 SX 2209 19 SX 2210 20 SX 2211 21 SX 2213 22 SX 2214 23 SX 2600 24 SX 2601 25 SX 2602 26 8

SX2200 GASKETS SX2201 GASKETS SX 2200 SX2201 INFORMATIVE Max. working pressure MPa 4 INFORMATIVE Max. working pressure MPa 6 Max. working temperature C Continual 140 steam 120 Peak 210 Max. working temperature C Continual 220 steam 180 Peak 250 Application: water, gas, oil, alcohol, basic chemicals Application: water, water vapour, gas, oil, alcohol, basic chemicals TECHNICALS PARAMETERS Corresponding standard TECHNICALS PARAMETERS Corresponding standard DENSITY g.cm -3 1,7 2,1 DIN 28 090-2 DENSITY g.cm -3 1,6 2,0 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 20 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 50 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,1 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. % 15 ASTM F 146 Testing acc. to TP 62-085-10 RESIDUAL STRESS* 16 h/175 C! MPa 20 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 45 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,06 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. % 5 ASTM F 146 Testing acc. to TP 62-085-10 ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 15 ASTM F 146 ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 5 ASTM F 146 FLEXIBILITY no craks and breaks ASTM F 147 FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING YELLOW branded on one side COLOR AND PRINTING GREEN branded on one side SX 2200 SX2201 DIN 28 091 2 FA-Z-12-0 DIN 28 091 2 FA-MA-1-0 ASTM F 104 F 712 120 M4 ASTM F 104 F 712 111 M4 Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm CERTIFICATION: CERTIFICATION: Code: wdb20 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Code: wdb07 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Interference with this document is prohibited. Interference with this document is prohibited. 10

SX2202 GASKETS SX2203 GASKETS SX2202 SX2203 INFORMATIVE Max. working pressure MPa 10 INFORMATIVE Max. working pressure MPa 12 Max. working temperature C Continual 250 steam 200 Peak 400 Max. working temperature C Continual 250 steam 200 Peak 400 Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals TECHNICALS PARAMETERS Corresponding standard DENSITY g.cm -3 1,7 2,0 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 30 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 50 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,06 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 3 ASTM F 146 % 5 ASTM F 146 FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm BLUE branded on one side DIN 28 091 2 ASTM F 104 SX2202 FA-MA-1-0 F 712 111 M5 Testing acc. to TP 62-085-10 Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals TECHNICALS PARAMETERS Corresponding standard DENSITY g.cm -3 1,9 2,2 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 32 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 50 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,08 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 3 ASTM F 146 % 5 ASTM F 146 FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm Testing acc. to TP 62-085-10 BLACK (both sides graphited) branded on one side DIN 28 091 2 ASTM F 104 SX2203 FA-MA-1-ST F 712 111 M7 CERTIFICATION: CERTIFICATION: Code: wdb22 Page: 1 of 1 Approved: 3.1.2012 Valid since: 4.1.2012 Code: wdb23 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Interference with this document is prohibited. Interference with this document is prohibited. 12

SX2204 GASKETS SX2205 GASKETS SX2204 SX2205 INFORMATIVE Max. working pressure MPa 12 INFORMATIVE Max. working pressure MPa 13 Max. working temperature C Continual 330 steam 250 Peak 450 Max. working temperature C Continual 250 steam 200 Peak 450 Application: water, water vapour, vapour, gas, oil, alcohol, fuel, basic chemicals Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals TECHNICALS PARAMETERS Corresponding standard TECHNICALS PARAMETERS Corresponding standard DENSITY g.cm -3 1,7 2,0 DIN 28 090-2 DENSITY g.cm -3 1,6 1,9 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 32 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 55 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,04 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. % 3 ASTM F 146 Testing acc. to TP 62-085-10 RESIDUAL STRESS* 16 h/175 C! MPa 32 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 50 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,03 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. % 3 ASTM F 146 Testing acc. to TP 62-085-10 ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 5 ASTM F 146 ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 5 ASTM F 146 FLEXIBILITY no craks and breaks ASTM F 147 FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING LIGHT BLUE branded on one side COLOR AND PRINTING GREEN branded on one side SX2204 SX2205 DIN 28 091 2 FA-M-1-0 DIN 28 091 2 FA-AM-1-0 ASTM F 104 F 712 111 M6 ASTM F 104 F 712 111 M6 Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm CERTIFICATION: CERTIFICATION: Code: wdb17 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Code: wdb01 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Interference with this document is prohibited. Interference with this document is prohibited. 14

SX2206 GASKETS SX2207 GASKETS SX2206 SX2207 INFORMATIVE Max. working pressure MPa 10 INFORMATIVE Max. working pressure MPa 13 Max. working temperature C Continual 250 steam 250 Peak 450 Max. working temperature C Continual 250 steam 250 Peak 450 Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals TECHNICALS PARAMETERS Corresponding standard TECHNICALS PARAMETERS Corresponding standard DENSITY g.cm -3 1,6 1,9 DIN 28 090-2 DENSITY g.cm -3 1,8 2,1 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 32 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 50 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,05 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. % 3 ASTM F 146 Testing acc. to TP 62-085-10 RESIDUAL STRESS* 16 h/175 C! MPa 34 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 55 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,06 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. % 3 ASTM F 146 Testing acc. to TP 62-085-10 ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 5 ASTM F 146 ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 5,5 ASTM F 146 FLEXIBILITY no craks and breaks ASTM F 147 FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING BLACK branded on one side COLOR AND PRINTING BLACK branded on one side SX2206 SX2207 DIN 28 091 2 FA-CA-1-0 DIN 28 091 2 FA-CA-1-ST ASTM F 104 F 712 110 M6 ASTM F 104 F 712 110 M7 Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm CERTIFICATION: CERTIFICATION: Code: wdb03 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Code: wdb14 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Interference with this document is prohibited. Interference with this document is prohibited. 16

SX2208 GASKETS SX2209 GASKETS SX2208 SX2209 INFORMATIVE Max. working pressure MPa 12 INFORMATIVE Max. working pressure MPa 14 Max. working temperature C Continual 250 steam 200 Peak 400 Max. working temperature C Continual 330 steam 250 Peak 450 Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals TECHNICALS PARAMETERS Corresponding standard DENSITY g.cm -3 1,9 2,2 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 32 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 50 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,08 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 3 ASTM F 146 % 5 ASTM F 146 FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm Testing acc. to TP 62-085-10 BLACK (both sides graphited) branded on one side DIN 28 091 2 ASTM F 104 SX2208 FA-MA-1-ST F 712 111 M7 Application: water, water vapour, vapour, gas, oil, alcohol, fuel, basic chemicals TECHNICALS PARAMETERS Corresponding standard DENSITY g.cm -3 1,9 2,2 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 32 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 55 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,04 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 3 ASTM F 146 % 5 ASTM F 146 FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm LIGHT BLUE branded on one side DIN 28 091 2 ASTM F 104 SX2209 FA-M-1-ST F 712 111 M7 Testing acc. to TP 62-085-10 CERTIFICATION: CERTIFICATION: Code: wdb23 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Code: wdb24 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Interference with this document is prohibited. Interference with this document is prohibited. 18

SX2210 GASKETS SX2211 GASKETS SX2210 SX2211 INFORMATIVE Max. working pressure MPa 14 INFORMATIVE Max. working pressure MPa 10 Max. working temperature C Continual 250 steam 200 Peak 450 Max. working temperature C Continual 250 steam 220 Peak 350 Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals Application: water, water vapour, gas, oil, alcohol, fuel, basic chemicals TECHNICALS PARAMETERS Corresponding standard TECHNICALS PARAMETERS Corresponding standard DENSITY g.cm -3 1,8 2,2 DIN 28 090-2 DENSITY g.cm -3 1,7 2,0 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 34 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 50 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,04 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C max. % 4 ASTM F 146 Testing acc. to TP 62-085-10 RESIDUAL STRESS* 16 h/175 C! MPa 32 DIN 52 913 COMPRESSIBILITY % 6 10 ASTM F 36 J RECOVERY min. % 55 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,05 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE ASTM OIL - IRM 903,!SN ISO 1817 5 h/150 C! % 2 ASTM F 146 Testing acc. to TP 62-085-10 ASTM FUEL B -!SN ISO 1817 5 h/23 C max. % 5 ASTM F 146 ASTM FUEL B -!SN ISO 1817 5 h/23 C! % 4 ASTM F 146 FLEXIBILITY no craks and breaks ASTM F 147 FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING GREEN branded on one side COLOR AND PRINTING BLACK branded on one side SX2210 SX2211 DIN 28 091 2 FA-AM-1-ST DIN 28 091 2 FA-AZ-1-0 ASTM F 104 F 712 111 M7 ASTM F 104 F 712 110 M6 Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm CERTIFICATION: CERTIFICATION: Code: wdb06 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Code: wdbxx Page: 1 of 1 Approved: 31.10.2011 Valid since: 1.11.2011 Interference with this document is prohibited. Interference with this document is prohibited. 20

SX2213 GASKETS SX2214 GASKETS INFORMATIVE CERTIFICATION: SX2213 Max. working pressure MPa 4 Max. working temperature C Application: acid, hydroxid, oil, cooling liquid, basic chemicals TECHNICALS PARAMETERS Continual 150 steam 130 Peak 200 Corresponding standard DENSITY g.cm -3 1,7 2,1 DIN 28 090-2 RESIDUAL STRESS* 16 h/175 C! MPa 20 DIN 52 913 COMPRESSIBILITY % 5 15 ASTM F 36 J RECOVERY min. % 50 ASTM F 36 J SPEC. LEAKAGE RATE! mg/(s.m) 0,1 DIN 3535 6 FLUID RESISTANCE THICKNESS CHANGE SULPHURIC ACID 96% max. % 16 - HYDROGEN CHLORIDE 36% max. % 15 - NITRIC ACID 50% max. % 7 - FLEXIBILITY no craks and breaks ASTM F 147 COLOR AND PRINTING Note: a) parameters are valid for thickness 2,0 mm b) * value valid for thickness 1,5 mm GREY branded on one side DIN 28 091 2 ASTM F 104 SX2213 FA-A-4Z-0 F 712 122 M5 Testing acc. to TP 62-085-10 SX2213 SX 2214 INFORMATIVE INFORMATIVE Max. working pressure Max. working pressure MPa MPa 4 13 Max. working temperature Max.working temperature C o c Continual Continual 150 400 steam 130 steam 350 Peak Peak 200 450 Application: acid, hydroxid, oil, cooling liquid, basic chemicals Application: water,water vapor, vapor,gas,oil,alcohol,fuel,basichemicals, cooling liquid TECHNICALS PARAMETERS TECHNICALS PARAMETERS Corresponding Corresponding standard standard DENSITY DENSITY g.cm g.cm 3 1,7-2,0 1,7 2,1 DIN28 DIN 28 090 090-2 - 2 RESIDUAL STRESS* 16 h/175 C! RESIDUAL STRESS*16 h/175/300 C MPa 32 20 / 25 DIN DIN 52 52 913 913 COMPRESSIBILITY MPa % 5 RESIDUAL STRESS* 16 h/300 C 25 15 BS ASTM 7531 F 36 J. RECOVERY COMPRESSIBILITY min. % 5-15 50 ASTM ASTM F F36-J 36 J SPEC. LEAKAGE RATE RECOVERY! mg/(s.m) % 0,1 60 ASTM DIN 3535 F36-J 6 FLUID SPEC.LEAKAGE RESISTANCE RATE THICKNESS CHANGE mg/(s.m) 0,02 DIN 3535-6 SULPHURIC FLUIDRESISTANCE-THICKNESSCHANGE ACID 96% max. % 16 - HYDROGEN ASTM OIL - IRM CHLORIDE 903, CSN ISO 36% 1817 max. % 15 - NITRIC ACID 5 h/150 c 50% max. % 3 7 ASTM F 146 - FLEXIBILITY ASTM FUEL B - CSN ISO 1817 no craks and breaks ASTM F 147 COLOR AND PRINTING GREY % branded 5 on one side ASTM F 146 5 h/23 C FLEXIBILITY no cracks and breaks SX2213 ASTM F 147 COLOR AND PRINTING DIN 28 091 2 FA-A-4Z-0 BLUE-brandedononeside ASTM F 104 F 712 122 M5 SX 2214 DIN 28091-2 FA-MAZ Note: ASTM F 104 F 712 122 a) parameters are valid for thickness 2,0 mm BS 7531 GRADE AX b) * value valid for thickness 1,5 mm Note: CERTIFICATION: a) parametersare valid for thickness2,0 mm b) value validfor thickness1,5 mm Testing acc. to TP 62-085-10 CERTIFICATION: Code: wdb05 Page: 1 of 1 Approved: 15.7.2010 Valid since: 16.7.2010 Interference with this document is prohibited. Code:wdb33 wdb05 Page:1of 1 of 11 Approved: 22.3.2012 15.7.2010 Valid since: 24.3.2012 16.7.2010 Interference with this document is prohibited. 22

SX2600 GASKETS SX2601 GASKETS SX2600 SX2601 SX2600 Compression moulded PTFE SX2601 Compression moulded PTFE Property Method Unit Specification Property Method Unit Specification Improved compression and wear resistance; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity. Excellent resistance to deformation; high recovery; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity. Main applications: It is the most commonly used filler for dynamic seal applications where both rotating and alternating movements are involved, pneumatic, hydraulic and mechanical parts. Bearings; Seals; Gaskets. Statement on suitability for contact with food: We certify that our ptfe products are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 177.1550 (a) (1) and (b)- Perfluorocarbon Resins. The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item s technological fitness it is assigned to, may be guaranteed. Main applications: Piping systems, apparatus flanges also with reduced stress or damaged surface, seals, gaskets, valve seats, piston rings. Statement on suitability for contact with food: We certify that our ptfe products are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 177.1550 (a) (1) and (b)- Perfluorocarbon Resins. The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item s technological fitness it is assigned to, may be guaranteed. 24

SX2602 SX2602 SX2602 Compression moulded PTFE Property Method Unit Specification Excellent resistance to deformation; excellent chemical stability; no ageing, no water absorption. Better thermal conductivity. Main applications: Bearings, seals, gaskets, moldings, valve seats, piston rings. Statement on suitability for contact with foodstuff: We certify that our ptfe products, are suitable to be in contact with food as per the following requirements: USA regulations (FDA, Food and Drug Administration, Department of Health and Human Services; Code of Federal Regulations 21 CFR Ch. 1 177.1550 (a) (1) and (b)- Perfluorocarbon Resins. The user must verify that the finished item, made of the semifinished product, would be technically suitable for the requested application. The user must also verify that the finished item may not cause any modification to the organoleptic properties of the food and that the item s technoiogical fitness it is assigned to, may be guaranteed. 26

PACKINGS Textile Solutions for Sealing APPLICATION Seal X packing products are used to seal shafts, rods, and seats, to prevent the escape of gas or fluids. The main fields of application are: > static seals (covers, frames, furnace doors, boilers); > stem seals (valves); > moving shaft seals (plunger pumps); > rotating shafts (centrifugal pumps, mixers, stirrers); > pumps. Depending on the end use, certain characteristics must be assessed > Flexibility > Elasticity and elastic return - to guarantee tightness under pressure > Homogeneity - acting as a guarantee of efficient service and longer life > Compact external surfaces - guaranteeing tightness while avoiding excessive tightening pressure and possible wear to the shaft > Impregnation to the heart - offering guaranteed tightness to improve efficiency and the value of the application COMPONENTS Seal X products have different components to suit different applications. The main components are: > graphite fibres (providing extra chemical and thermal resistance); > insulating glass and ceramic fibres (generally used for static thermo resistant seals); > vegetal fibres, such as cotton, linen, ramie fibre and hemp (especially suited to applications with cold water and where hard-wearing qualities are required); > synthetic fibres, such as ptfe, polyester, aramidic and acrylic fibres (suitable for producing packing with high resistance to chemicals and corrosive agents); > metals, such as stainless steel, copper and inconel (used to strengthen the packing and thus increase its mechanical strength at high temperatures and pressures); > lubricants and binders, essential when using packing as these must not attack the contact fluids or corrode the metals surrounding the packing or any metal in this, while at the same time eliminating friction. INDEX OF PACKINGS SX 9010 30 SX 9011 31 SX 9012 32 SX 9013 33 SX 9015 34 SX 9016 35 SX 9020 36 SX 9021 37 SX 9030 38 SX 9031 39 SX 9032 40 SX 9035 41 SX 9040 42 SX 9041 43 SX 9053 44 SX 9059 45 SX 9060 46 SX 9070 47 SX 9071 48 SX 9072 49 SX 9075 50 SX 9080 51 SX 9081 52 SX 9088 53 SX 9095 54 SX 9097 55 These products are suitable for a large range of applications according to your specific requirements. 28

SX9010 PACKINGS SX9011 PACKINGS SX9010 SX9011 SX9010 synthetic pack black SX9011 incotex Braid packing specifically developed to replace graphite asbestos braid packing at a low price. Synthetic yarn is impregnated yarn-by-yarn with a special graphite powder, with the addition of a corrosion inhibitor and top quality lubricants. Water; steam; oil; gas; piston pumps; centrifugal pumps; valves; suitable for the chemical and petrochemical industries, shipping, electricity power stations, cementworks and oil refineries. Braid packing made from a special pure graphite yarn reinforced with discontinuous metal micro-filament (made by Schappe), impregnated in three stages: first the individual yarns are impregnated with graphite paste plus a corrosion inhibitor, then on the surface with particles and flakes of fine graphite. Particularly suitable for seals in valves and especially wherever high resistance to temperature is required over a long period. High temperatures; valve stems; suitable for the chemical industry, electricity power stations, nuclear power stations, the petrochemical industry and oil refineries. P bar 20 40 60 t C -50 +250 ph 4 10 v m/sec 10 2 1,5 P bar 80 300 t C -100+650 ph 0 14 v m/sec 1,5 1 30

SX9012 PACKINGS SX9013 PACKINGS SX9012 SX9013 SX9012 pure graphite SX9013 99% pure graphite Graphite braid packing has the great advantage of not hardening or vitrifying at high temperatures. This packing minimises friction on the axes and has high heat dispersal, is treated with a special solution based on extremely pure graphite powder plus a corrosion inhibitor. Valve stems; supply pumps; chemical products, apart from strong oxidants; suitable for water treatment plant, the chemical industry, electricity power stations, nuclear power stations, the petrochemical industry and oil refineries Graphite braid packing with a high carbon content (99%), twisted and doubled with several ends for the production of a highly flexible packing that withstands stress and bending, without losing volume or crystallising at high temperatures. Our top quality yarns receive pre-treatment with special dispersed graphite mixes during production with the addition of corrosion inhibitors. Due to its low content of chlorides, this packing is recommended for applications in the nuclear sector. High temperatures; valves; suitable for the chemical industry, nuclear power stations, electricity power stations, the petrochemical industry, water treatment plant and boilers. P bar 40 20 200 t C -100+650 ph 0 14 v m/sec 25 2 1,5 P bar 40 20 200 t C -100+650 ph 0 14 v m/sec 30 3 1 32

SX9015 PACKINGS SX9016 PACKINGS SX9015 SX9016 SX9015 fluorpack + kevlar on corners SX9016 pure graphite + inconel Braid packing consisting of fluorpack yarns reinforced on the corners with pure kevlar yarns with diagonal interweaving. This combination improves the mechanical resistance of the braid packing and its resistance to extrusion and high pressures. Braid packing consisting of graphite yarn reinforced with continuous metal filaments yarns. Specifically designed for valve seals, it is impregnated yarn-by-yarn, on the finished packing and in its surface with nonorganic corrosion inhibitors. Pumps; piston pumps; centrifugal pumps; stirrers; valves; centrifuges; acids; oils; solvents; abrasive substances; waste water; hot water; suitable for paper mills, the food industry, the chemical and petrochemical industries, water treatment plant and boilers. Pumps; piston pumps; centrifugal pumps; stirrers; valves; centrifuges; acids; oils; solvents; abrasive substances; waste water; hot water; suitable for paper mills, the food industry, the chemical and petrochemical industries, water treatment plant and boilers. FOR VALVES P bar 70 250 350 t C -100+280 ph 3 12 v m/sec 25 3 1,5 P bar 300 t C -100+650 ph 0 14 v m/sec 1 34

SX9020 PACKINGS SX9021 PACKINGS SX9020 SX9021 SX9020 expanded pure graphite + inconel SX9021 expanded pure graphite Braid packing consisting of 99,9% pure, flexible, expanded graphite inconel reinforced; it has all the features of the pure graphite+ inconel packing at an economically favourable price. Extremely easy to use. Braid packing consisting of 99,9% pure, flexible, expanded graphite; it has all the features of the pure graphite packing at an economically favourable price. Extremely easy to use. High temperatures; valve stems; suitable for the chemical industry, electricity power stations, nuclear power stations, the petrochemical industry and oil refineries. Valve stems, feed pumps, chemicals with the exception of strong oxidizers, suitable for water treatment, chemical industries, electrical power stations, nuclear power stations, petrol industry, refineries. FOR VALVES P bar 300 t C -100+650 ph 0 14 v m/sec 1 P bar 300 t C -100+650 ph 0 13 v m/sec 1 36

SX9030 PACKINGS SX9031 PACKINGS SX9030 SX9031 SX9030 discontinuous aramidic + lubricated PTFE SX9031 kevlar + pbi on corners Braid packing consisting of discontinuous fibre aramidic yarn with diagonal interweaving, impregnated with dispersed ptfe at 40% or over plus an inert lubricant. This braid packing is impregnated in three stages: the individual yarn, during braiding and the surface. Stuffing box packing with exclusive interweaving using aramidic yarns and pbi twisted yarns on the corners. This packing is impregnated in three stages: the individual yarn, the ply and during braiding. Good dimensional stability and stability. High pressure; speed; water; oil; grease; weak acid and alkalis; abrasive fluids; chemical products; steams; solvents; petrol by-products; centrifugal pumps; piston pumps; stirrers; mixers; suitable for paper mills; sugar industry; electricity power stations; the chemical and petrochemical industry and water treatment plant. Piston pumps; centrifugal pumps; low pressure valves; static seals on covers; mixers; reactors; sea water; suitable for the food industry and paper mills. P bar 30 80 100 t C -100 +250 ph 3 12 v m/sec 20 2 1 P bar 40 130 100 t C -100 +300 ph 1 13 v m/sec 15 2 2 38

SX9032 PACKINGS SX9035 PACKINGS SX9032 SX9035 SX9032 discontonuous lubricated graphited aramidic SX9035 kevlar Braid packing consisting of discontinuous aramidic yarn, treated yarnby-yarn with high purity graphite powder, plus inert lubricant and corrosion inhibitor, with diagonal interweaving. Braid packing consisting of continuous aramidic yarn, impregnated with dispersed ptfe and a lubricant, inflammable and heat-stable; this packing does not stain, has a low friction factor and dissipates the heat generated by the peripheral speed when used with centrifugal pumps. Valves and high speeds; static seals; reciprocating motion; abrasive liquids; water; chemical products and light caustic substances; suitable for water treatment plant, electricity power stations and the chemical and petrochemical industries. Steam; water treatment; airlocks; low pressure valves; expanding joints; solvents; piston shafts; steam; light acids; alkalis; oil; universal use, except with oxygen, strong alkalis and oxidants; suitable for paper mills, the petrochemical and chemical industries and electricity power stations. P bar 50 100 100 t C -100 +300 ph 2 12 v m/sec 15 2 1,5 P bar 50 100 t C -100 +280 ph 3 12 v m/sec 15 3 40

SX9040 PACKINGS SX9041 PACKINGS SX9040 SX9041 SX9040 fluorpack SX9041 GFO gore Fluorpack, designed with an exclusive Lenzing fiber,is a braided packing made of expanded PTFE yarns containing capsulated graphite particles and components with lubricating powers and suitable for conducting heat, grant a high thermal conductivity as well as resistance to chemical agents and to ageing. This homogenous structure permits the packing not to lose its components during the operation, reduces to a minimum the risk of wear on the shaft and prevents the fluid from being polluted by the particles that detach themselves from the packing. It has a longer working life if compared with traditional packings. Thanks to his plasticity and high flexibility, Fluorpack renders the installation and the disassembly of the gasket easier, and labour costs may be considerably reduced. Only the boxes with the blue label are Fluorpack 100% packings, the exclusive trade mark of Texpack made of Lenzing fibers. This blue label guarantees the 100% Fluorpack quality. ADVANTAGES: ong working life, universal chemical resistance, excellent themal conductivity for high shaft speed, does neither hydrolyze nor harden, clean and easy to cut, not abrasive, better heat dissipation, lower weight loss and consequent minor shrinkage, asbestos-free. CHEMICAL INDUSTRY: Pumps and control valves, mixers and dischargers for acids, alkali, resins, solvents. PETROLCHEMICAL INDUSTRY: Pumps and valves for acids, asphalt, vapour, mud, chemical products, caustic solutions. MINING INDUSTRY: Drainage pumps. TEXTILE INDUSTRY: Bleaches, dyestuffs, acids, filtered liquids, dirty water. FOOD INDUSTRY: Pumps, valves and mixers for ammonia, foodstuffs, pasta, cleaning solutions. SUGAR-REFINERIES: Pumps and valves for cold water, dirty water, mud, syrup, juicesi. BREWIERS: Pumps and valves for beer, brine, hops, caustic soda, ammonia. DISTILLERIES: Pumps and control valves for cleaning solutions and must. POWER PLANTS: Pumps and control valves for water, dirty water, fuels, condensate, spent ashes. NUCLEAR POWER PLANTS: Pumps for cooling water, fuels. DEPURATORS: Pumps and valves for acids, alkali, mud. PAPER MILLS: Pumps and valves for chlorine, bleaches, alkali, lye, condensate, washing water, mud, boiler feed, pulp, vapour. Braid packing consisting of expanded GFO gore ptfe yarns with encapsulated graphite particles. This structure offers a low friction factor and dissipates the heat of the pumps without hardening the braid packing itself. Centrifugal pumps; low pressure valves; oil; solvents; acids and alkalis; as a gasket seal for all products with the exception of oleum, fuming nitric acid, turpentine and fluorine; P bar 50 200 300 t C -200+280 ph 0 14 v m/sec 25 2 1,5 suitable for paper mills, the chemical and petrochemical industries, water treatment plants and boilers. 42

SX9053 PACKINGS SX9059 PACKINGS SX9053 SX9059 SX9053 pulp and paper SX9059 ramie fibre + lubricated PTFE Braid packing consisting of synthetic, discontinuous yarn (polyimide) lubricated in three stages: on the individual yarn, the ply and the braiding with dispersed PTFE. A universal packing for paper mills, offering the following characteristics: high mechanical strength, low friction factor, does not stain, non-polluting, good resistance to chemicals and easy to install. Suitable for paper mills. Braid packing consisting of ramie fibre yarn, impregnated yarn-by-yarn with pure dispersed PTFE and treated with a special inert lubricant. A pasty packing that does not stick to the shafts and is easily adjusted. Excellent resistance to fuels, oil, greases, saline water and solvents. Pumps; piston pumps; suitable for the food industry (beer production), paper mills, oil refineries and sugar factories. P bar 15 60 90 t C -100+250 ph 2 12 v m/sec 12 1,5 2 P bar 25 60 100 t C -50 +120 ph 4 11 v m/sec 10 2 1,5 44

SX9060 PACKINGS SX9070 PACKINGS SX9060 SX9070 SX9060 synthetic pack white SX9070 lubrificated PTFE Braid packing specifically developed to replace asbestos at a low price. With universal usage, it is made from synthetic yarns impregnated with PTFE and inert lubricants during braiding. Very flexible and elastic, it adapts well to stuffing boxes, is nonpolluting and does not stain. Braid packing consisting of pure PTFE yarns impregnated with dispersed ptfe and an inert lubricant, with diagonal interweaving to guarantee a perfectly square cross-section. It has a low friction factor, and so does not scratch the shaft; inert to all chemical products apart from alkaline metals. Piston pumps; centrifugal pumps; valves; suitable for the petrochemical and chemical industries, electricity power stations, paper mills, sugar factories and the food industry. Centrifugal pumps; valves with air and gas; oxidants and aggressive chemicals; concentrated acids; steam; suitable for the petrochemical and chemical industries, paper mills and the food industry. FOR VALVES P bar 50 80 100 t C -100 +250 ph 2 12 v m/sec 15 2 1,5 P bar 50 100 20 t C -200+280 ph 0 14 v m/sec 8 2 1 46

SX9071 PACKINGS SX9072 PACKINGS SX9071 SX9072 SX9071 PTFE SX9072 PTFE + kevlar on corners Braid packing consisting of pure PTFE yarns, impregnated yarn-by-yarn with dispersed ptfe, with diagonal interweaving. This has a low friction factor and resists chemical attack. The significant breaking resistance and tensile strength of this packing means it can be used for valves with pressure of up to 350 Kg/cm 2. Braid packing consisting of lubricated pure PTFE yarn, strengthened on the corners with pure kevlar yarn, impregnated yarn-by-yarn with dispersed PTFE and lubricant. Valves; centrifugal pump shafts; mixers; stirrers; high pressure; reciprocating pistons; register valves; aggressive chemical products; steam; solvents; suitable for the petrochemical and chemical industries and paper mills. Reciprocating motion; high pressure and speed; solvents; weak acids; aggressive gases; alkaline products; aggressive chemical fluids apart from molten alkaline metals; universal use apart from oxygen; suitable for paper mills; electricity power plants; chemical and petrochemical industries and water treatment plants. FOR VALVES P bar 150 500 t C -200+280 ph 0 14 v m/sec 2 1 P bar 30 500 t C -200+280 ph 3 12 v m/sec 2 1,5 48

SX9075 PACKINGS SX9080 PACKINGS SX9075 SX9080 SX9075 lubrificated PTFE for food SX9080 Pan multifilament Braid packing in pure PTFE with exclusive interweaving, specifically designed for the food industry. The yarn used to produce our packings complies with the FDA standard A packing consisting of multi-filament Pan carbon yarns with long fibres. Impregnated with a special blend of PTFE and with the addition of extremely pure powdered graphite. Pumps; centrifugal pumps; piston pumps; valve steams; suitable for food preservation and the food industry in general. The packing is suitable for applications in service pumps in a wide range of fields. Oil, chemical, ship-building and boiler-making industries. P bar 50 100 20 t C -200+280 ph 0 14 v m/sec 8 2 1 P bar 50 100 200 t C -60+280 ph 1 13 v m/sec 25 2 1,5 50

SX9081 PACKINGS SX9088 PACKINGS SX9081 SX9088 SX9081 carbon + PTFE SX9088 pre-oxidised graphited carbon + inconel Braid packing made from carbon yarn, impregnated yarn-by-yarn with purest graphite powder. PTFE dispersion treatment to eliminate the possible migration of the carbon fiber. Braid packing consisting of pre-oxidised pan carbon graphite yarns, strengthened with inconel yarns. Specifically developed for seals in valves, it is impregnated yarn-by-yarn with special graphites and corrosion inhibitors, with the addition of excellent lubricants. Pumps; valves; stirrers; strong chemical agents; petrol; water; air; alkalis; organic and non-organic products; sewers; saline water; phosphates; boiler supply pumps and corrosive gas pumps; suitable for the petrochemical industry; oil refineries and electricity power stations. Static seal valves; steam; fumes; oil; crystallising products; petrochemical and chemical substances, apart from oxidants; water treatment plant; suitable for the chemical and petrochemical industries, metal-working and electricity power stations. P bar 35 50 150 t C -130+250 ph 1 13 v m/sec 10 2 P bar 200 t C -50+500 ph 2 12 v m/sec 1 52

SX9095 PACKINGS SX9097 PACKINGS SX9095 SX9097 SX9095 glass + lubricated PTFE SX9097 lubricated graphited glass Braid packing consisting of texturised E glass 6/9 micron and impregnated yarn-by-yarn with a high percentage of dispersion of PTFE and inert silicone-free lubricant. Features good chemical resistance. Braid packing consisting of textured E glass 6/9 micron, impregnated yarn-by-yarn with a blend of high percentage graphite and lubricant, with the addition of corrosion inhibitor. Water; steam; solvents; abrasive and crystallised chemical products; static seals; reciprocating motion; valves; covers; gas; mixers; stirrers; oil; water treatment plant; centrifugal and reciprocating pumps; suitable for electricity power stations and the chemical and petrochemical industries. Packing suitable for applications as oven doors gasket, manholes, steam, fumes, oils, acids and base stuffs. P bar 20 40 60 t C -50 +280 ph 2 12 v m/sec 15 2 1,5 P bar 200 t C -50 +550 ph 2 12 v m/sec 54

RUBBER AND URETHANE Custom-made, for any application Types of Rubber Seal X can customize these products for a large range of applications to suit your specific needs. > Natural Rubber > Linatex > S.B.R > Neoprene > Hypalon > Heavy Hypalon > Viton > Chloro Butyl > Silicone > Other rubber > Wide range of durometers Other Products Seal X has 5 Hydraulic Compression Molding Presses to meet all your requirements. > Wearable pump parts( Impellers, Gland & Suction Liners > 2X2 up to 10X8 SRL Parts > Drill parts > Locomotive suspension Parts > Check Valve Parts > Shotcrete Nozzles > Custom Rubber and Urethane Parts 56

HIGH TEMPERATURE Sealing system to be adopted in case of high temperatures DESCRIPTION Seal X is a leading manufacturer of safe, heat resistant materials for all industries. Using the most advanced fibers from alumina, silica, glass, aramids and bio-soluble fibers, we manufacture products for almost any application. Our thermal solutions cover a service temperature range from 0 F to 2500 F. We offer material engineered for the most demanding thermal environment. Seal X is your one-stop shop for thermal solutions, whether it s a catalog item or a prototype for a completely custom application. We can customize products that will fit your application parameters. 58

Seal X Company 185 Magill St, Lively ON, P3Y1K6 Ph. (705) 662-6836 1-800-461-0155 Fx: (705) 692-1435 sales@sealxsupply.com 60