Serving and clearing trolleys, shelf trolleys, tray clearing trolleys Serving and clearing trolleys Serving trolleys 95 Clearing trolleys 99 Accessories for serving and clearing trolleys 100 Shelf trolleys Shelf trolleys for Cook&Chill 103 Shelf trolleys for eutectic plates 103 Shelf trolleys 104 Accessories for shelf trolleys 106 Tray clearing trolleys Tray clearing trolleys 108 Accessories for tray clearing trolleys 109 Serving/clearing tr., shelf trolleys, tray clearing trolleys BLANCO Professional 91
Rugged assistants every day: BLANCO serving trolleys. SW 8 x 5-3 with three-sided panelling and 2 hinged doors Standard bumper rail All serving and clearing trolleys are equipped with a strong bumper rail. They protect the trolley and inventory against damage. Integrated noise dampers Quiet! A noise-insulating antidrumming mat is mounted under each shelf. This considerably reduces annoying rolling noises. Shelves with profile edge All shelves are produced with an all-round raised profile edge. This prevents anything from slipping over the edge - even when the going gets rough. Ingeniously simple The panelling can be mounted on existing BLANCO serving trolleys in no time. Simply clamp it behind the edge of the upper shelf and fix it securely to the lower shelf. And you re done! More stability Excellent finishing! One-piece welded seams connect the tube frame to the shelves, and increase the stability in the process. Curled edges The curled edges make the shelf stable and ensure an extremely high load-bearing capacity. In addition, they also protect the personnel from injuries. SW 10 x 6-3 BASIC SW 8 x 5-2 SW 6 x 4-3 92 BLANCO Professional
Quality in the fast lane BLANCO shelf trolleys Whether it's transport, temporary or long-term storage the BLANCO shelf trolleys will make any chef happy. Shelf trolleys are ideally suited for storing and transporting GN containers, serving salads and desserts or portioning on conveyor belts. RWR 160 shelf trolley for storing and transporting GN containers. Serving/clearing tr., shelf trolleys, tray clearing trolleys RWR 2-A shelf trolley for portioning on conveyor belts. RWR 751 shelf trolley can be used as an alternative for GN 1/1 or GN 2/1. RWR 160 shelf trolley RWR 162 shelf trolley BLANCO Professional 93
Tray clearing trolleys by BLANCO Professional Tray clearing trolleys quickly ensure order in self-service areas. To ensure that dish return is executed safely even during the most chaotic rush hours, tray clearing trolleys by BLANCO Professional are made of high-quality stainless. The welded frame construction guarantees maximum stability and durability with compact dimensions and top manoeuvrability. The standard wall guards protect units and furniture. Upon request, the trolleys can be delivered with an ergonomical push handle made of hygienic stainless or additional push-through protection. TAW 2 x 10 with 3-sided panelling, push handle, trolley top and railing TAW 2 x 10 with 2-sided panelling, push handle, trolley top and railing TAW 10 with 2-sided panelling The panelling: Brings colour to everyday life. The panelling sets for the BLANCO tray clearing trolleys can be used anywhere a privacy shield is desired. The sturdy side walls can be hooked in and unhooked easily. This makes cleaning easier and the trolley can still be used without panelling. In addition to stainless, 13 panelling colours offer a matching shade for any setting. 94 BLANCO Professional
Serving trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN 18867-8 Serving trolleys SW 6 x 4 Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) Number/ dim. of shelves L x W (mm) SW 6 x 4-2 SW 6 x 4-2 Serving trolley 700 x 500 x 950 mm 2 shelves 585 mm 600 x 400 mm Weight/ load cap. (kg) 125 mm dia. 11.0 kg synthetic * 569 767 11.0 kg 566 246 SW 6 x 4-3 SW 6 x 4-3 Serving trolley 700 x 500 x 950 mm 3 shelves 275 mm 600 x 400 mm Serving trolleys SW 8 x 5 SW 8 x 5-2 SW 8 x 5-2 Serving trolley 900 x 600 x 950 mm 2 shelves 585 mm 800 x 500 mm 13.0 kg synthetic * 569 768 13.0 kg 566 247 Serving/clearing tr., shelf trolleys, tray clearing trolleys SW 8 x 5-3 SW 8 x 5-3 Serving trolley 900 x 600 x 950 mm 3 shelves 275 mm 800 x 500 mm SW 8 x 5-4 SW 8 x 5-4 Serving trolley 900 x 600 1290 mm 4 shelves 285 mm 800 x 500 mm 15.0 kg synthetic * 569 769 15.0 kg 555 527 18.0 kg synthetic * 569 770 18.0 kg 555 528 21.0 kg synthetic * 569 771 21.0 kg 563 437 SW 8 x 5-5 SW 8 x 5-5 Serving trolley 900 x 600 x 1290 mm 5 shelves 205 mm 800 x 500 mm 25.0 kg synthetic * 569 772 25.0 kg 563 438 The underlined order numbers are available for delivery within 72 hours in commercially BLANCO Professional 95
Serving trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN 18867-8 Serving trolleys SW 9 x 6 Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) Number/ dim. of shelves L x W (mm) SW 9 x 6-2 SW 9 x 6-2 Serving trolley 1000 x 650 x 950 mm 2 shelves 585 mm 900 x 550 mm Weight/ load cap. (kg) 125 mm dia. 18.0 kg synthetic * 569 773 18.0 kg 555 531 SW 9 x 6-3 SW 9 x 6-3 Serving trolley 1000 x 650 x 950 mm 3 shelves 275 mm 900 x 550 mm 20.0 kg synthetic * 569 774 20.0 kg 555 532 SW 9 x 6-4 SW 9 x 6-4 Serving trolley 1000 x 650 x 1290 mm 4 shelves 285 mm 900 x 550 mm 30.0 kg synthetic * 569 775 30.0 kg 563 448 SW 9 x 6-5 SW 9 x 6-5 Serving trolley 1000 x 650 x 1290 mm 5 shelves 205 mm 900 x 550 mm 32.0 kg synthetic * 569 776 32.0 kg 563 449 96 BLANCO Professional The underlined order numbers are available for delivery within 72 hours in commercially
Serving trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN 18867-8 Serving trolleys SW 10 x 6 BASIC Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) SW 10 x 6-2 BASIC SW 10 x 6-2 BASIC Serving trolley Number/ dim. of shelves L x W (mm) 1100 x 700 x 950 mm 2 shelves 585 mm 1000 x 600 mm Weight/ load cap. (kg) 125 mm dia. 20,0 kg 120,0 kg synthetic * 573 486 573 487 SW 10 x 6-3 BASIC SW 10 x 6-3 BASIC Serving trolley 1100 x 700 x 950 mm 3 shelves 275 mm 1000 x 600 mm 23,0 kg 120,0 kg synthetic * 573 488 573 489 Serving/clearing tr., shelf trolleys, tray clearing trolleys SW 10 x 6-3 BASIC GDD (shown with access.) SW 10 x 6-3 BASIC GDD Serving trolley with larger distance between shelves, for holding 3 GDD topmounted frames (Order No. 574 167) 1100 x 700 x 1290 mm 3 shelves 445 mm 1000 x 600 mm 30.0 kg 2 of which have brakes synthetic * 574 166 SW 10 x 6-4 BASIC SW 10 x 6-4 BASIC Serving trolley 1100 x 700 x 1290 mm 4 shelves 285 mm 1000 x 600 mm 34,0 kg 120,0 kg synthetic * 573 490 573 491 SW 10 x 6-5 BASIC SW 10 x 6-5 BASIC Serving trolley 1100 x 700 x 1290 mm 5 shelves 205 mm 1000 x 600 mm 37,0 kg 120,0 kg synthetic * 573 492 573 493 The underlined order numbers are available for delivery within 72 hours in commercially BLANCO Professional 97
Serving trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN 18867-8 Serving trolleys SW 10 x 6 Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) Number/ dim. of shelves L x W (mm) SW 10 x 6-2 SW 10 x 6-2 Serving trolley 1100 x 700 x 1010 mm 2 shelves 585 mm 1000 x 600 mm SW 10 x 6-3 SW 10 x 6-3 Serving trolley 1100 x 700 x 1010 mm 3 shelves 275 mm 1000 x 600 mm SW 10 x 6-4 SW 10 x 6-4 Serving trolley 1100 x 700 x 1350 mm 4 shelves 285 mm 1000 x 600 mm SW 10 x 6-5 SW 10 x 6-5 Serving trolley 1100 x 700 x 1350 mm 5 shelves 205 mm 1000 x 600 mm Weight/ load cap. (kg) 125 mm dia. 2 fixed castors, 2 steering castors with brakes 23.0 kg synthetic * 569 777 160.0 kg 23.0 kg 555 535 160.0 kg 23.0 kg synthetic * 569 778 160.0 kg 23.0 kg 555 536 160.0 kg 2 fixed castors, 2 steering castors with brakes 28.0 kg synthetic * 569 779 28.0 kg 555 537 28.0 kg synthetic * 569 780 28.0 kg 555 538 2 fixed castors, 2 steering castors with brakes 40.0 kg synthetic * 569 781 40.0 kg 563 458 40.0 kg synthetic * 569 782 40.0 kg 563 459 2 fixed castors, 2 steering castors with brakes 42.0 kg synthetic * 569 783 42.0 kg 563 461 42.0 kg synthetic * 569 784 42.0 kg 563 462 98 BLANCO Professional The underlined order numbers are available for delivery within 72 hours in commercially
Clearing trolleys Made of corrosion-resistant stainless Welded shelves * Synthetic castors corrosion-resistant in compliance with DIN 18867-8 Clearing trolleys ARW 9 x 6 Illustration Model Designation Dimensions L x W x H/ clear height between shelves (mm) Number/ dim. of shelves L x W (mm) ARW 9 x 6-2 ARW 9 x 6-2 Clearing trolley 1000 x 650 x 1030 mm 2 shelves 585 mm 900 x 550 mm Weight/ load cap. (kg) 125 mm dia. 19.0 kg 2 of which have brakes synthetic * 569 786 563 022 ARW 9 x 6-3 ARW 9 x 6-3 Clearing trolley 1000 x 650 x 1030 mm 3 shelves 275 mm 900 x 550 mm 23.0 kg 2 of which have brakes synthetic * 569 787 Serving/clearing tr., shelf trolleys, tray clearing trolleys 563 055 Clearing trolleys ARW 10 x 6 ARW 10 x 6-2 ARW 10 x 6-2 Clearing trolley 1100 x 700 x 1010 mm 2 shelves 481 mm 1000 x 600 mm 25.0 kg 2 fixed castors, 160.0 kg 2 steering castors with brakes synthetic * 569 789 563 090 2 of which have brakes synthetic * 569 788 563 095 The underlined order numbers are available for delivery within 72 hours in commercially BLANCO Professional 99
Accessories for serving and clearing trolleys Panelling sets Illustration Model Designation For model Stainless panelling Stainless panelling 3-sided, stainless, for hooking on serving trolleys, can be completely removed for cleaning SW 8x5-2, SW 8x5-3 375 449 SW 10x6-2, SW 10x6-3, SW 10x6-2 BASIC, SW 10x6-3 BASIC 375 451f Stainless panelling, with hinged doors Stainless panelling, with hinged doors 3-sided, with stainless hinged doors on the front for easy mounting to serving trolleys, panelling parts can be completely removed for cleaning, not possible for SW with gusset plates SW 8x5-2, SW 8x5-3 375 450 SW 10x6-2, SW 10x6-3, SW 10x6-2 BASIC, SW 10x6-3 BASIC 375 452 Coloured panelling Coloured panelling 3-sided, thin sheet, double-sided, powder-coated in various colours, for hooking on serving trolleys, can be completely removed for cleaning SW 8x5-2, SW 8x5-3 375 453 lime 574 130 apple green 574 131 carmine red 574 132 graphite black 574 133 raspberry 574 134 SW 10x6-2, SW 10x6-3, SW 10x6-2 BASIC, SW 10x6-3 BASIC 375 455 Coloured panelling, with hinged doors Coloured panelling, with hinged doors 3-sided, with hinged doors on the front, thin sheet, double-sided, powder-coated in various colours, for easy mounting to serving trolleys, panelling parts can be completely removed for cleaning, not possible for SW with gusset plates SW 8x5-2, SW 8x5-3 375 454 lime 574 135 apple green 574 136 carmine red 574 137 graphite black 574 138 raspberry 574 139 SW 10x6-2, SW 10x6-3, SW 10x6-2 BASIC, SW 10x6-3 BASIC 375 456 100 BLANCO Professional The underlined order numbers are available for delivery within 72 hours in commercially
Panelling colours Colours may vary. 01 signal white RAL 9003 02 pearl white RAL 1013 03 pale brown RAL 8025 00 stone grey RAL 7030 04 umbra grey RAL 7022 05 graphite black RAL 9011 Serving/clearing tr., shelf trolleys, tray clearing trolleys 06 broom yellow RAL 1032 07 carmine red RAL 3002 08 sapphire blue RAL 5003 raspberry Pantone 228 C lime Pantone 382 C espresso Pantone 4695 C apple green Pantone 370 C BLANCO Professional 101
Accessories for serving and clearing trolleys Illustration Model Designation Dimensions L x W x H (mm) Capacity AFB 4 x 2 x 2.5 AFB 4 x 2 x 2.5 Garbage container of stainless, deep-drawn, with hanging device, can be hung on and removed from push handle (Not suitable for SW 6) 425 x 225 x 250 mm 18.5 liters 555 509 BGN 1/3-150 BGN 1/3-150 Cutlery container of stainless, deep-drawn, with hanging device, can be hung on and removed from push handle 325 x 176 x 150 mm 110 pieces of cutlery 555 510 GDD top-mounted frame GDD topmounted frame Top-mounted frame for correct storage, drying, transporting and dispensing Gastronorm lids with form-fitting seal, suitable for serving trolleys SW 10 x 6-2, SW 10 x 6-2 BASIC, SW 10 x 6-3 BASIC GDD, Top-mounted frame can also be used without serving trolley 963 x 496 x 231 mm 30 lids for GN 1/1 or 60 lids for GN 1/2 or 90 lids for GN 1/3 574 167 Railing Illustration Model Designation For model Added price in Railing Railing Railing, on 3 sides, 50 mm high, one long side open all SW per shelf Railing, all-round, 50 mm high per shelf Shelf reinforcements Gusset plate Gusset plate 4 gusset plates per shelf, (not on bottom shelf) SW 6x4, SW 8x5, SW 9x6, SW 10x6 per shelf not shown Reinforcing profile Shelf reinforcing profile per shelf SW 8x5, SW 9x6, SW 10x6 per shelf not shown Air-identical castors 125 mm dia., 2 of which have brakes Pneumatic-tired castors, 180 mm dia. 4 steering castors SW 6x4, SW 8x5, SW 9x6, SW 10x6 BASIC SW 10x6 SW 6x4, SW 8x5, SW 9x6, SW 10x6 BASIC 102 BLANCO Professional The underlined order numbers are available for delivery within 72 hours in commercially
Shelf trolleys Made of corrosion-resistant stainless with 125 mm dia., 2 of which have brakes * Synthetic castors, corrosion-resistant in compliance with DIN 18867-8 Shelf trolleys for use with Cook & Chill Illustration Model Designation Support pairs/ spacing RWR 2 RWR 2 Shelf trolley, 2-part, for hanging in GN containers 6 pairs + 2 pairs 165 mm Capacity Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 8 GN 1/1 812 x 625 x 900 mm 17.0 kg synthetic * 572 305 60.0 kg 568 432 RWR 3 RWR 3 Shelf trolley, 3-part, for hanging in GN containers 9 pairs + 3 pairs 165 mm 12 GN 1/1 1165 x 625 x 900 mm 23.0 kg synthetic * 572 306 70.0 kg 568 446 RWR 2-A RWR 2-A Shelf trolley, 2-part, with attachment, for hanging in GN containers 6 pairs + 2 pairs + 2 pairs in attachment 10 GN 1/1 812 x 625 x 1200 mm 22.0 kg synthetic * 572 307 70.0 kg 568 403 Serving/clearing tr., shelf trolleys, tray clearing trolleys 165 mm RWR 3-A RWR 3-A Shelf trolley, 3-part, with attachment, for hanging in GN containers 9 pairs + 3 pairs + 3 pairs in attachment 15 GN 1/1 1165 x 625 x 1200 mm 31.0 kg synthetic * 572 308 80.0 kg 568 416 165 mm Shelf trolleys for eutectic plates Illustration Model Designation Support pairs/ spacing not shown RWR-EP 23 Shelf trolley for transporting and storing eutectic plates in cold storage houses 23 pairs 58 mm Capacity Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 23 eutectic 464 x 619 1675 mm 31 kg synthetic * 573 962 plates (lengthwise insertion) 200 kg RWR-EP 46 Shelf trolleys for transporting and storing eutectic plates in cold storage houses 23 pairs 58 mm 46 eutectic plates (crosswise insertion) 668 x 739 x 1675 mm 39 kg synthetic * 573 963 200 kg The underlined models are available for delivery within 72 hours in commercially BLANCO Professional 103
Shelf trolleys Made of corrosion-resistant stainless Support rails with integrated tip safety and push-through protection with 125 mm dia., 2 of which have brakes * Synthetic castors, corrosion-resistant in compliance with DIN 18867-8 Shelf trolleys Illustration Model Designation Support pairs/ spacing RWRA 850 RWRA 850 Shelf trolley with work surface RWRA 850/900 8 pairs 73 mm Capacity 8 GN 1/1 or 16 GN 1/2 Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 460 x 613 x 845 mm 15.0 kg synthetic * 572 926 100.0 kg 572 925 460 x 613 x 900 mm synthetic * 569 966 RWRA 851 RWRA 851 Shelf trolley with work surface RWRA 851/900 8 pairs 73 mm RWRA 852 RWRA 852 Shelf trolley 16 pairs with work surface, 73 mm 2-section 8 GN 2/1 or 16 GN 1/1 16 GN 1/1 or 32 GN 1/2 662 x 733 x 845 mm 20.0 kg synthetic * 572 928 572 927 662 x 733 x 900 mm synthetic * 569 967 820 x 613 x 845 mm 22.0 kg synthetic * 572 930 180.0 kg 572 929 RWR 751 RWR 751 Shelf trolley 7 pairs 73 mm 7 GN 2/1 or 14 GN 1/1 662 x 733 x 845 mm 16.0 kg synthetic * 572 932 572 931 RWR 160 RWR 160 Shelf trolley 18 pairs 73 mm 18 GN 1/1 or 36 GN 1/2 460 x 613 x 1645 mm 15.0 kg synthetic * 572 934 572 933 RWR 160-20 RWR 160-20 Shelf trolley 20 pairs 75 mm 20 GN 1/1 or 40 GN 1/2 460 x 613 x 1800 mm 19.0 kg synthetic * 572 303 568 497 104 BLANCO Professional The underlined models are available for delivery within 72 hours in commercially
Shelf trolleys Made of corrosion-resistant stainless Support rails with integrated tip safety and push-through protection with 125 mm dia., 2 of which have brakes * Synthetic castors, corrosion-resistant in compliance with DIN 18867-8 Shelf trolleys Illustration Model Designation Support pairs/ spacing RWR 161 RWR 161 Shelf trolley 18 pairs 73 mm Capacity 18 GN 2/1 or 36 GN 1/1 Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 662 x 733 x 1645 mm 25.0 kg synthetic * 572 936 572 935 RWR 161-20 RWR 161-20 Shelf trolley 20 pairs 75 mm 20 GN 2/1 or 40 GN 1/1 662 x 733 x 1800 mm 25.0 kg synthetic * 572 304 RWRR 161 RWRR 161 Shelf trolley when empty, can be pushed into each other to save space 18 pairs 73 mm 18 GN 2/1 or 36 GN 1/1 568 498 662 x 734 x 1645 mm 25.0 kg synthetic * 572 938 572 937 Serving/clearing tr., shelf trolleys, tray clearing trolleys RWRE 161 RWRE 161 Shelf trolley for roll-in refrigerators 18 pairs 73 mm 18 GN 2/1 or 36 GN 1/1 587 x 658 x 1645 mm 25.0 kg synthetic * 572 940 572 939 RWR 162 RWR 162 Shelf trolley, 2-piece 36 pairs 73 mm 36 GN 1/1 or 72 GN 1/2 820 x 613 x 1645 mm 29.0 kg synthetic * 572 942 572 941 RWR SK-161 RWR SK-161 Salad and dessert serving trolley with serving doors 5 pairs 115 mm 9 pairs 73 mm 14 GN 2/1-20 or 14 BZG 2/1-20 662 x 733 x 1645 mm 30.0 kg synthetic * 572 944 572 943 The underlined models are available for delivery within 72 hours in commercially BLANCO Professional 105
Shelf trolleys Made of corrosion-resistant stainless Support rails with integrated tip safety and push-through protection with 125 mm dia., 2 of which have brakes * Synthetic castors, corrosion-resistant in compliance with DIN 18867-8 Shelf trolleys Illustration Model Designation Support pairs/ spacing RWR-VP 163 RWR-VP 163 Shelf trolley for storing and providing pre-portioned and lidded cold items 12 pairs 115 mm Capacity 24 GN or EN trays Dimensions L x W x H (mm) Weight/ load cap. (kg) 125 mm dia. 671 x 832 x 1675 mm 18 kg synthetic * 572 923 240 kg 572 945 Accessories for shelf trolleys Accessories Illustration Model Designation For model Dust protection hood (shown with shelf trolley) Dust protection hood for shelf trolley, not suitable for shelf trolleys with push handle Dust protection hood, consisting of transparent, crack-proof polyethylene, 280 µ, 5-sided protection, sewn seam with zipper RWR 160 568 771 RWR 161 568 772 RWRR 161 568 757 RWR 162 568 773 RWR-VP 163 573 018 Insulating hood (shown with shelf trolley) Insulating hood for shelf trolley, not suitable for shelf trolleys with push handle Insulating hood, inside and outside of food-safe, tear-resistant PE, 300 µ thick, aluminised on both sides, 5-sided protection (Filling: 3 mm thick PP), with Velcro fastener, not suitable for shelf trolleys with panelling RWR 160 568 774 RWR 161 568 775 RWRR 161 568 905 RWR 162 568 776 RWR-VP 163 573 017 106 BLANCO Professional The underlined models are available for delivery within 72 hours in commercially
Accessories for shelf trolleys Accessories Illustration Model Designation For model Price in not shown Stainless panelling on 2 sides RWR 2, RWR 2-A, RWR 3, RWR 3-A Stainless panelling RWRA 850, RWRA 852 RWRA 851, RWR 751 RWR 160 RWR 160-20 RWR 161 RWR 161-20 RWR 162 RWR-VP 163 Stainless panelling on 3 sides RWR 2, RWR 2-A, RWR 3, RWR 3-A RWRA 850 RWRA 851 RWRA 852 RWR 751 RWR 160 RWR 160-20 RWR 161 RWR 161-20 RWR 162 RWR-VP 163 Resopal panelling Resopal panelling Resopal panelling, on 2 or 3 sides all RWR, not available for: RWRR 161, RWR SK 161, RWRE 161 Serving/clearing tr., shelf trolleys, tray clearing trolleys Top surface Top surface Trolley top made of stainless RWR 160, RWR 162 RWR 161 Push handle Push handle Push handle made of stainless, not possible in combination with dust protection or insulating hoods RWR 2, RWR 3, RWR 2-A, RWR 3-A, RWR 160, RWR 160-20, RWR 161, RWR 161-20, RWR 162 Transport locking bar Transport locking bar Transport locking bar made of stainless on both sides RWR 160, RWR 161, RWR-VP 163 RWR 160-20, RWR 161-20 RWRA 850, RWRA 851, RWRA 852, RWR 751 RWR 162 The underlined models are available for delivery within 72 hours in commercially BLANCO Professional 107
Tray clearing trolleys Made of corrosion-resistant Tray supports with integrated push-through protection on both sides, tray support frame completely removable 125 mm dia., 2 of which have brakes Synthetic castors, corrosion-resistant in compliance with DIN 18867-8 Illustration Model Designation Capacity Dim. L x W x H (mm)/ Support spacing (mm) TAW 10 TAW 10 GN Tray clearing trolley, 1-piece, accessible from both sides TAW 10 EN 10 Gastronorm trays (530 x 325 mm) 10 Euronorm trays (530 x 370 mm) 468 x 673 x 1550 mm 125 mm 513 x 673 x 1550 mm 125 mm Max. load cap./ Max. load cap. per support pair (kg) 150.0 kg 4.5 kg Weight: 21 kg 574 240 574 241 TAW 10 KN 10 canteen trays (460 x 344 mm) 487 x 607 x 1550 mm 125 mm 574 242 TAW 2 x 10 TAW 2 x 10 GN Tray clearing trolley, 2-piece, accessible from both sides TAW 2 x 10 EN 20 Gastronorm trays (530 x 325 mm) 20 Euronorm trays (530 x 370 mm) 850 x 673 x 1550 mm 125 mm 940 x 673 x 1550 mm 125 mm 150.0 kg 4.5 kg Weight: 33 kg 574 243 574 244 TAW 2 x 10 KN 20 canteen trays (460 x 344 mm) 888 x 607 x 1550 mm 125 mm 574 245 TAW 12 TAW 12 GN Tray clearing trolley, 1-piece, accessible from both sides 12 Gastronorm trays (530 x 325 mm) 468 x 673 x 1550 mm 100 mm 150.0 kg 4.5 kg Weight: 21 kg 574 325 TAW 12 EN 12 Euronorm trays (530 x 370 mm) 513 x 673 x 1550 mm 100 mm 574 326 TAW 12 KN 12 canteen trays (460 x 344 mm) 487 x 607 x 1550 mm 100 mm 574 327 TAW 2 x 12 TAW 2 x 12 GN Tray clearing trolley, 2-piece, accessible from both sides TAW 2 x 12 EN 24 Gastronorm trays (530 x 325 mm) 24 Euronorm trays (530 x 370 mm) 850 x 673 x 1550 mm 100 mm 940 x 673 x 1550 mm 100 mm 150.0 kg 4.5 kg Weight: 33 kg 574 328 574 329 TAW 2 x 12 KN 24 canteen trays (460 x 344 mm) 888 x 607 x 1550 mm 100 mm 574 330 108 BLANCO Professional The underlined models are available for delivery within 72 hours in commercially
Accessories for tray clearing trolleys Illustration Designation For model Coloured panelling on 2 sides, lime Side wall panelling on 2 sides, coloured (colours: see page 101) Panelling parts can be completely removed for cleaning, thin sheet, electrolytically on both sides, powder-coated in various colours TAW GN 378 441 TAW EN 378 442 TAW KN 378 443 Side wall panelling on 2 sides, stainless Panelling parts can be completely removed for cleaning TAW GN 378 450 TAW EN 378 451 TAW KN 378 452 Panelling on 3 sides, stainless Side and rear wall panelling on 3 sides, coloured (colours: see page 101) Panelling parts can be completely removed for cleaning, thin sheet, electrolytically on both sides, powder-coated in various colours TAW 10 GN TAW 12 GN TAW 10 EN TAW 12 EN 378 444 378 445 TAW 10 KN TAW 12 KN 378 446 TAW 2 x 10 GN TAW 2 x 12 GN TAW 2 x 10 EN TAW 2 x 12 EN TAW 2 x 10 KN TAW 2 x 12 KN 378 447 378 448 378 449 Serving/clearing tr., shelf trolleys, tray clearing trolleys Side and rear wall panelling on 3 sides, stainless Panelling parts can be completely removed for cleaning TAW 10 GN TAW 12 GN 378 453 TAW 10 EN TAW 12 EN 378 454 TAW 10 KN TAW 12 KN 378 455 TAW 2 x 10 GN TAW 2 x 12 GN 378 456 TAW 2 x 10 EN TAW 2 x 12 EN 378 457 TAW 2 x 10 KN TAW 2 x 12 KN 378 458 Trolley top Stainless- trolley top with all-round railing Roof can be completely removed for cleaning, stainless TAW 10 GN TAW 12 GN 574 246 TAW 10 EN TAW 12 EN 574 247 TAW 10 KN TAW 12 KN 574 248 TAW 2 x 10 GN TAW 2 x 12 GN 574 249 TAW 2 x 10 EN TAW 2 x 12 EN 574 250 TAW 2 x 10 KN TAW 2 x 12 KN 574 251 Push handle all TAW Additional push-through protection (stainless- rod) TAW 10 and TAW 12 TAW 2 x 10 KN and TAW 2 x 12 KN not shown, all TAW Price reduction for model with synthetic castors The underlined models are available for delivery within 72 hours in commercially BLANCO Professional 109
110 BLANCO Professional