SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com
ontents ronze Gate Valves ontents Page Figure Number Index 2 ronze Gate Valves Introduction 3 The Pressure Equipment Directive 4 ronze Gate Valves Data Sheets 5-12 Fig No Page 33X 5 33XLS 5 30 6 30LS 6 30 7 30LS 7 33 8 669 9 28 10 35PN16 11 609 12 In this catalogue we have endeavoured to make the information as accurate as possible, and we cannot accept any responsibility should it be found that in any respect the information is inaccurate or incomplete or becomes so as a result of further developments. 2
Introduction ronze Gate Valves ll Hattersley bronze gate valves are inside screw pattern with either rising stem or non-rising stem configuration. The majority of the range have a threaded bonnet but union bonnet valves are available. Valve bodies, with the exception of the DZR range, are made from bronze castings and have integral seating surfaces. Valves are fitted with asbestos-free gland packing as standard. The SI Kitemark against a figure number in the table below indicates that all or part of that range is Kitemarked to the relevant ritish Standard. The WRS pproved Product Mark against a figure number indicates that all or part of that range has been independently assessed and certified under the Water Regulations dvisory Scheme and is listed in the Water Fittings and Materials Directory. $ WRS pproved Product * Kitemarked to the relevant ritish Standard Fig No PN Series End Size onnet Wedge Rating onnections Range Pattern Material 35PN16$ 16 Flanged 15-100mm Threaded ronze 30*$ 16 ompression 15-54mm Threaded ronze 30LS*$ 16 ompression 15-54mm Threaded ronze 30*$ 20 Threaded 1/ 4-3in Threaded DZR lloy 30LS*$ 20 Threaded 1/ 4-3in Threaded DZR lloy 33X*$ 20 Threaded 1/ 4-4in Threaded ronze 33XLS*$ 20 Threaded 1/ 4-4in Threaded ronze 33* 32 Threaded 1/ 4-3in Threaded ronze 669 32 Threaded 1/ 4-2in Union ronze 28 - - Threaded 1/ 2-3in Threaded ronze 609 32 Threaded 1/ 4-3in Threaded ronze 3
The Pressure Equipment Directive ronze Gate Valves Fig. No. PN(PS) DN Fluid Group (1) ategory 30/30LS 16 15-54 2L SEP 30/30LS 20 1/ 2 "-2" 2G SEP 1/ 4 "-2" 2G SEP 33X/33XLS 20 21/ 2 "-4" 2G 1 (2) 1/ 4 "-11/ 4 " 2G SEP 33 32 11/ 2 "-3" 2G 1 (2) 1/ 4 "-11/ 4 " 2G SEP 669 32 11/ 2 "-2" 2G 1 (2) 28 8.6 1/ 2 "-3" 2L SEP 15-50 2G SEP 35 16 65-100 2G 1 (2) 609 32 1/ 4 "-3" 2G SEP FLUID GROUPS 2G = Group 2 gases (lso Group 2 liquids but NOT group 1 gases nor Group 1 liquids) 2L = Group 2 liquids only TEGORY SEP = Sound Engineering Practice I = ategory I (E Marked) 4
Fig. 33X - 33XLS ronze Gate Valves PN20 - Series SEN12288 PN20 Series 9 bar at 180º 20 bar from -10 to 100º Shell: 30 bar Seat: 22 bar Material omponent Material S EN ody ronze 1982 491K onnet ronze 1982 491K Stem (1/ 4 to 2in) DZR rass 12164 W602N (21/ 2 & 3in) rass 12164 W614N (4in) Manganese ronze Disc ronze 1982 491K Packing sbestos Free Packing Gland (1/ 4 to 3in) rass 12164 W614N (4in) ronze 1982 491K Gasket (3 & 4in) sbestos Free Kitemarked to S EN 12288 WRS pproved Product Non-rising stem Threaded bonnet One piece wedge S21 Taper thread (ISO 7) vailable with NPT thread (33XT) 1/2 to 4 vailable with lockshield (33XLS) up to 2 Nominal Size in 1/ 4 3/ 8 1/ 2 3/ 4 1 11/ 4 11/ 2 2 21/ 2 3 4 mm 46 46 51 55 63 71 73 83 96 105 162 mm 75 75 82 95 118 144 166 190 219 259 366 mm 57 57 57 69 69 76 81 94 140 150 232 D mm 87 87 86 112 124 149 175 196 - - - Weight kg 0.27 0.26 0.35 0.55 0.84 1.18 1.66 2.55 4.30 6.4 18.37 33X D 33XLS 5
Fig. 30-30LS DZR Gate Valves PN20 - Series SEN12288 PN20 Series 9 bar at 180º 20 bar from -10 to 100º Shell: 30 bar Seat: 22 bar Kitemarked to S EN 12288 WRS pproved Product Non-rising stem Threaded bonnet One piece wedge S21 Taper thread (ISO 7) vailable with lockshield (30LS) vailable with NPT thread (30T) Material omponent Material S EN STM Stem DZR opper lloy 12164 W602N - Gland Packing sbestos Free Stem Ring DZR opper lloy 12164 W602N - onnet DZR opper lloy 12165 W602N - ody DZR opper lloy 12165 W602N - Disc DZR opper lloy 12165 W602N - Nominal Size in 1/ 2 3/ 4 1 11/ 4 11/ 2 2 mm 51.6 56 64 72 75 91 mm 90 100 120 125 145 170 mm 56.8 56.8 69.2 69.2 75.5 81.5 D mm 80 85 105 110 130 155 Lockshield Key Fig 391 391 391 391 391 391 Ref 2 2 2 3 Weight kg 0.32 0.45 0.7 1.22 1.55 2.45 30 E 30LS 6
Fig. 30-30LS DZR Gate Valves PN16 Pressure bar 18 16 14 12 10 8 6 4 2 0 0 20 40 60 80 100 120 140 Temperature Material omponent Material S EN STM ody ronze 62-83600 Disc ronze 62-83600 Stem ronze 62-83600 or 21-48200 onnet ronze 62-83600 or 124-37700 Packing PTFE or PTFE/Neoprene Gland rass 16-36000 Packing Nut rass 16-36000 / 124-37700 Handwheel ast Iron Handwheel Nut Steel ompression Olive rass 135-26000 ompression Nut rass 584-85700 (for liquid service) 5 bar at 120º 6 bar at 110º 10 bar at 65º 16 bar from 2 to 30º Shell: 24 bar Seat: 17.6 bar Kitemarked to S EN 12288 WRS pproved Product Non-rising stem Threaded bonnet One-piece wedge ompression ends to S EN 1254-2 Suitable for copper pipe to S EN 1087:Table X vailable with lockshield (30LS) Nominal Size mm 15 22 28 35 42 54 mm 54 61 67 83 83 100 mm 77 88 106 122 136 170 mm 46 53 58 72 80 97 D mm 12.7 19.1 25.4 31.8 38.1 50.8 E mm 80 85 105 110 130 155 F mm 65 70 76 92 101 125 Lockshield Key Fig No 391 391 391 391 391 391 Ref 2 2 2 3 Weight kg 0.34 0.49 0.75 1.06 1.36 2.37 F 30 E D F 30LS 7
Fig. 33 ronze Gate Valves PN32 - Series S5154 PN32 Series 14 bar at 198º 32 bar from -10 to 100º Shell: 48 bar Seat: 35.2 bar Kitemarked to S EN 12288 Non-rising stem Threaded bonnet One piece wedge S21 Taper thread (ISO 7) vailable with NPT thread (33T) 1/2 to 3 Pressure bar 36 32 28 24 20 16 12 8 4 0 Saturated Steam 0 40 80 120 160 200 240 Temperature Material omponent Material S EN STM Stem ronze 1982 491K 62 Gland Packing sbestos Free Stem Ring rass 12164 W614N 455-385 onnet (1/ 4 to 2in) rass 12165 W617N 124 lloy 2 (21/ 2 & 3in) ronze 1982 491K 62 ody ronze 1982 491K 62 Wedge ronze 1982 491K 62 Nominal Size in 1/ 4 3/ 8 1/ 2 3/ 4 1 11/ 4 11/ 2 2 21/ 2 3 mm 46 46 51 55 63 71 73 83 108 117 mm 78 78 86 98 120 148 172 196 241 256 mm 60 60 70 80 85 95 102 120 140 150 Weight kg 0.36 0.35 0.47 0.6 0.92 1.41 1.92 2.72 5.62 7.89 8
Fig. 669 ronze Gate Valves PN32 Series SEN12288 PN32 Series 14 bar at 260º 32 bar from -10 to 120º Shell: 48 bar Seat: 35.2 bar Material omponent Material S EN ody ronze 1982 491K onnet ronze 1982 491K Stem ronze 1982 491K Disc ronze 1982 491K Packing sbestos Free Gland rass 12164 W614N Packing Nut rass 12164 W614N Handwheel luminium Handwheel Nut rass 12164 W614N S EN 12288 Rising stem Union bonnet One piece wedge Taper thread (ISO7-1) vailable with NPT thread (669T) Nominal Size in 1/ 4 3/ 8 1/ 2 3/ 4 1 11/ 4 11/ 2 2 mm 46 46 51 55 63 71 73 83 mm 134 134 137 169 194 232 266 321 mm 69 69 76 81 94 100 120 140 Weight kg 0.32 0.31 0.46 0.72 1.10 1.50 2.25 3.20 9
Fig. 28 ronze Gate Valves - Lever Operated 8.6 bar WP 4 bar at 150º 8.6 bar cold (non-shock) Shell: 12.5 bar Seat: 12.5 bar Threaded cover S21 Taper thread (ISO7-1) Lever operated Material omponent Material S EN STM Stem Stainless Steel 10088-3 X8rNiS18-9 ISI 420 Gland Packing sbestos Free Stuffing ox rass 12164 W614N 455-385 Gate ronze 1982 491K 62 Disk rm ronze 1982 491K 62 ody ronze 1982 491K 62 Nominal Size in 1/ 2 3/ 4 1 11/ 4 11/ 2 2 21/ 2 3 mm 46 51 55 64 65 81 95 122 mm 40 45 55 65 70 95 120 145 mm 76 89 102 114 127 140 152 178 Weight kg 0.4 0.6 1.0 1.4 1.7 2.8 4.8 8.0 10
Fig. 35PN16 ronze Gate Valves PN16 Series Pressure bar 18 16 14 12 10 8 6 4 2 0 Saturated Steam 0 40 80 120 160 200 Temperature Material omponent Material S EN Stem (15 to 50mm) DZR opper lloy 12164 W602N Stem (65 to 100mm) ronze 1982 491K Gland Packing sbestos Free Stem Ring (15 to 80mm) rass 12164 W614N (100mm) ronze 1982 491K onnet (15 to 50mm) ronze 1982 491K (65 to 100mm) ronze 1982 491K ody ronze 1982 491K Wedge ronze 1982 491K Nominal Size mm 15 20 25 32 40 50 65 80 100 mm 80 90 100 110 120 135 165 185 190 mm 100 110 130 145 165 200 240 280 365 mm 70 80 85 95 120 120 155 180 230 D mm 95 105 115 140 150 165 185 200 220 Weight kg 1.4 2.1 2.7 4.0 4.4 6.3 9.1 15.4 22.2 S5154 PN16 Series 7 bar at 170º 16 bar from -10 to 100º Shell: 24 bar Seat: 17.6 bar WRS pproved product Non-rising stem Threaded bonnet One piece wedge Flanged to S4504 PN16 Table E and F vailable with lockshield (35LS) vailable with position indicator and locking device (35PN16LDI) in all sizes except for 32, 65 and 100mm. D 11
Fig. 609 ronze Gate Valve PN32 - Series 14 bar at 198º 32 bar from -10 to 100º Test Pressure Each valve is individually hydrostatically tested to S EN 12266 at the following test pressures. Shell: 30 bar Seat: 22 bar Rising stem Threaded bonnet One piece wedge ronze trim Taper thread S EN 10226 (S 21-ISO 7) omplies with S EN 12288 Pressure bar 36 32 28 24 20 16 12 8 4 0 Saturated Steam 0 40 80 120 160 200 240 Temperature Material omponent Material S EN ody ronze 1982 491K onnet ronze 1982 491K Stem (1/ 4 to 2 ) ronze 1982 491K (21/ 2 ) L. rass (12) 12163 W301G (3 ) ronze 1982 491K Disc ronze 1982 491K Packing Ring sbestos Free WRS Listed & pproved Gland rass 12164 W614N Packing Nut (21/ 2 & 3 ) rass 12164 W721R Packing Nut (1/ 4 to 2 ) rass 12164 W614N Handwheel luminium Identification Plate luminium Handwheel Nut rass 12164 W614N Nominal Size in 1/ 4 3/ 8 1/ 2 3/ 4 1 11/ 4 11/ 2 2 21/ 2 3 mm 46 46 51 55 63 71 73 83 108 117 Open mm 129 129 133 162 191 223 253 307 374 436 mm 60 70 70 80 85 95 105 120 140 180 Weight kg 0.35 0.40 0.50 0.75 1.30 1.70 2.60 3.50 6.00 8.80 12