111, 120 Joint Restraints The Next Generation Joint Restraint Technology Smith-Blair Cam-Lock joint restraint products provide a fast and economical means restraining mechanical joint water and wastewater fittings. Innovative design, extensive testing, and state--the-art manufacturing, combine to produce the Cam-Lock with unequaled performance characteristics. Utilizing Single Tooth Technology and Cam-Action Design, the Cam-Lock provides controlled positive pipe engagement, resulting in exceptional restraint capabilities. The Cam-Lock s ductile iron construction provides superior corrosion resistance and strength. Its wedges, actuating bolts and breakaway nuts are coated to help prevent corrosion. The Cam-Lock body has a heavy impact and corrosion resistant Smith-Blair fusion bonded Flexi- Coat epoxy coating, which meets application methods AWWA C550, C213 and C219. The Cam-Lock is available with a kit, that includes T-bolts, nuts and a choice MJ gaskets in sizes 4-inch to 24-inch. Pressure Ratings for Cam-Locks on PVC C900 DI OD C905 DI OD ASTM D2241 IPS OD DR 14 200 DR 18 235 SDR 17 250 DR 18 150 DR 25 165 SDR 21 200 DR 25 100 SDR 26 160 Pressure Ratings for Cam-Locks on Ductile Iron C151 DI OD 4-16 350 PSI 18-24 250 PSI Note: Pressure ratings are for ordinary waterworks with transient surges only. Material Specifications GLAND: 65-45-12 Ductile Iron (ASTM A536) WEDGES: Single tooth ductile iron, heat treated for ductile iron pipe applications ACTUATING BOLTS: 60-40-18 Ductile Iron (ASTM A536) GASKET: Standard Mechanical Joint. AWWA C111 and ANSI A21.11 SBR or Multi-Seal Gasket. T-BOLTS: HSLA (High Strength Low Alloy) BREAK AWAY NUTS: Carbon Steel COATING: Gland is Flexi-Coat Epoxy are E-coated Actuating Bolts are E-coated Material specifications subject to change. Cam-Lock Features Fewer wedges mean less installation time in many sizes Lower actuating-bolt installation torque requirement than industry average Unique cam action provides uncompromised engagement, regardless line pressure Multi-Seal MJ Gasket available in 4-12 PVC. Fits both IPS and DI PVC pipe No modifications necessary to the 120 s to install on C-900 or IPS size PVC pipe 1/2 Longer T-bolts than most other manufacturers to accommodate C110 fittings Contoured wedges for maximum pipe engagement Positive visual break away nuts Visible wedge engagement simplifies field inspection Full five-degree pipe deflection capability through 12, three-degree on 14-24 Color coded wedges and nuts to easily identify pipe application: Red for PVC and Black for Ductile Iron All essential parts remain intact, even if the fitting is removed - no loose parts in the ditch Independent wedge engagement provides superior restraining capabilities with maximum pipe deflection Secondary hex shank for easy removal and re-installation Eliminates need for costly concrete thrust blocks 2
On-line Joint Restraint Calculator www.sbrestraint.com Joint Restraint Calculator Smith-Blair s on-line Joint Restraint Calculator is designed to help engineers, distributors and others determine restraint length values and which Cam-Locks to select. The calculator allows the creation projects that contain one or more restraint calculations for any number locations. When the calculator is first started, a new project and a new site are automatically created. Settings can then be added for different site locations by utilizing the easy-touse wizard. New Project Calculated Restraint Length Value(s) 62 ft. Navigation Start Over New Site Open List Save Print Help 62 ft. = Length pipeline to be restrained in front the dead-end Restraint Only Smith-Blair Cam-Lock Part Number - 120-09050001-000 Restraint with MJ Gasket & T-Bolts Smith-Blair Cam-Lock Part Number - 120-09050000-000 Restraint with IPS Gasket & T-Bolts Smith-Blair Cam-Lock Part Number - 120-09050000-001 Selections PVC Soil GM Safety 2.0 Pressure 250 Fitting End Cap Depth 8 8 Results Features include: Starting a new project at any time. Determining product selection by part number. Opening and loading a previously saved project file. Saving the current project to a file on your computer. Adding any number new sites to the current project. Displaying a list all sites created for the current project. Switching between sites or deleting sites with one easy click. You have the option to enter both a project name and notes and a site name and notes. Printing a report showing all the site settings and calculations for the current project. -You will have the option to include the derived and calculated variables with the report. Settings chosen for the current site are shown on the screen at all times. You may jump to any setting by clicking on the link. 3
111, 120 Joint Restraints FM Approved for sizes 4-12 on ductile iron pipe at 175 psi and for sizes 4-12 on AWWA C900 Class DR18 PVC pipe at 150 psi. Superior Cam-Action Restraint Technology Unlike other products on the market that rely on a sliding wedge action and higher external pipe loading, the Smith-Blair Cam-Lock joint restraint utilizes a unique, patent-pending cam action and single tooth technology to achieve superior pipe restraint. The cam action requires less installation torque to engage the pipe, allowing the break-away nuts to snap f easier and faster. This produces less point loading on the pipe wall and helps make the Cam-Lock easier to install. The Cam-Lock s actuating bolts are designed with no internal stops so the actuating nuts only break away when the wedge properly engages the pipe. The Cam-Lock s unique design allows installation on both IPS and ductile size PVC pipe without modifications. No washers to remove... No disassembly or re-assembly... Just install it and forget it!!! Cam-Lock before installation Cam-Lock 111 Joint Restraints Cam-Lock installed with nut f. Cam-Lock with wedge rotated For MJ Fittings on Ductile Iron With D.I. Gaskets, Bolts, and Nuts Restraint Only Un-** 4 4.80 2 111-04800000-000 11.8 111-04800001-900 7.1 6 6.90 3 111-06900000-000 17.8 111-06900001-900 11.2 8 9.05 3 111-09050000-000 20.3 111-09050001-900 13.1 10 11.10 6 111-11100000-000 32.5 111-11100001-900 26.0 12 13.20 8 111-13200000-000 40.4 111-13200001-900 31.5 14* 15.30 10 111-15300000-000 53.6 111-15300001-900 43.3 16* 17.40 12 111-17400000-000 66.3 111-17400001-900 54.1 18* 19.50 12 111-19500000-000 72.2 111-19500001-900 59.8 20* 21.60 14 111-21600000-000 83.8 111-21600001-900 69.8 24* 25.80 16 111-25800000-000 106.9 111-25800001-900 90.4 *Note: In sizes 14-24 only the gaskets and hardware are boxed. 4 **For boxed restraints, replace the -900 end code with -000.
120 Joint Restraints FM Approved for sizes 4-12 on ductile iron pipe at 175 psi and for sizes 4-12 on AWWA C900 Class DR18 PVC pipe at 150 psi. For MJ Fittings on PVC - with a kit With D.I. Gasket, Nuts and Bolts With IPS Gasket, Nuts and Bolts 4 4.80 2 120-04800000-000 12.2 4.50 120-04800000-001 12.2 6 6.90 3 120-06900000-000 18.3 6.63 120-06900000-001 18.3 8 9.05 3 120-09050000-000 20.8 8.63 120-09050000-001 20.8 10 11.10 6 120-11100000-000 33.4 10.75 120-11100000-001 33.4 12 13.20 8 120-13200000-000 42.0 12.75 120-13200000-001 42.0 14* 15.30 10 120-15300000-000 55.4 16* 17.40 12 120-17400000-000 68.4 18* 19.50 12 120-19500000-000 74.8 20* 21.60 14 120-21600000-000 86.9 24* 25.80 16 120-25800000-000 109.8 *Note: 14-24 only gaskets and hardware are boxed. For MJ Fittings on PVC - without a kit For MJ Fittings on PVC - without a kit Without Gasket, Nuts and Bolts Un- Without Gasket, Nuts and Bolts 4 4.50-4.80 2 120-04800001-900 8.3 6 6.63-6.90 3 120-06900001-900 12.4 8 8.63-9.05 3 120-09050001-900 14.9 10 10.75-11.10 6 120-11100001-900 25.7 12 12.75-13.20 8 120-13200001-900 34.1 14 15.30 10 120-15300001-900 45.1 16 17.40 12 120-17400001-900 56.2 18 19.50 12 120-19500001-900 62.4 20 21.60 14 120-21600001-900 72.9 24 25.80 16 120-25800001-900 93.2 4 4.50-4.80 2 120-04800001-000 8.3 6 6.63-6.90 3 120-06900001-000 12.4 8 8.63-9.05 3 120-09050001-000 14.9 10 10.75-11.10 6 120-11100001-000 25.7 12 12.75-13.20 8 120-13200001-000 34.1 Suitable Cam-Lock applications for PVC are limited to SDR 26 or heavier wall pipe, as defined by ASTM D2241. Skid Quantity and Weight*** Skid Quantity Approximate Weight 4 240 1650 6 144 1760 8 108 1778 10 72 1333 12 48 1650 14 48 2231 16 36 2089 18 24 1564 20 24 1936 24 12 1184 ***Applies to both boxed and un-boxed Cam-Lock Joint Restraints. For MJ Fittings on PVC with Multi-Seal MJ Gasket, see page 6. 5
Multi-Seal MJ Gasket 120 Joint Restraints with Multi-Seal MJ Gasket The Smith-Blair Multi-Seal MJ Gasket saves both time and money. It is designed to give the distributor or end user the flexibility stocking and using one gasket. The Multi-Seal MJ Gasket is designed to fit IPS and Ductile Iron PVC pipe. Multi-Seal MJ Gasket Features One gasket instead two gaskets means less inventory. SBR rubber compound for easy, reliable, leak-free joints. Meets AWWA C111 gasket performance requirements. 6" Multi-Seal MJ Gasket (6.63" - 6.90") Multi-Seal MJ Gaskets For IPS and Ductile Iron PVC. 6" Standard MJ Gasket Prile 6" Multi-Seal MJ Gasket Prile 4 4.50-4.80 000-00036735-060 0.5 6 6.63-6.90 000-00036736-060 0.6 8 8.63-9.05 000-00036737-060 0.8 10 10.75-11.10 000-00036738-060 1.1 12 12.75-13.20 000-00036739-060 1.6 Cam-Locks for MJ Fittings on PVC with Multi-Seal MJ Gasket 6 With Multi-Seal MJ Gasket, Nuts and Bolts 4 4.50-4.80 2 120-04500480-000 12.2 6 6.63-6.90 3 120-06630690-000 18.3 8 8.63-9.05 3 120-08630905-000 20.8 10 10.75-11.10 6 120-10751110-000 33.4 12 12.75-13.20 8 120-12751320-000 42.0.