Steel-plastic RZA Steel-sheet RZB Plastic RZG Plastic IP65 RZI Enhanced space Large number of terminals Invented for electricians
Main advantages Steel-plastic RZA Enhanced space Large number of terminals Invented for electricians Steel-sheet RZB Plastic RZG Plastic IP65 RZI 2
Enhanced space RZA Comfort space at terminal block exceptional distance of terminal blocks from the first row of devices large space for connection of inlet conductors large space for creation of reserves especially at outlet conductors enough space for conductors also after interconnection of the devices by means of the upper busbar Space under the U rails large space for conductors under the U rails at the RZI and RZB enclosures - 10 mm at RZA, RZG - 45 mm at RZI - 50 mm at RZB Space at the sides of the enclosure Spacing of the U rails 135 mm plenty of space for conductors in usual equipment density comfortable work even in case of installation of the maximum number of devices in the row Maximum space between the rows of devices all enclosures offer the most space in their category plenty of space for both interconnection of device and connection of outlet conductors - 135 mm at RZA - 135 160 mm at RZG - 150 mm at RZI - 150 mm at RZB RZB RZG Spacing of the U rails 150 mm Spacing of the U rails 135 160 mm Spacing of the U rails 150 mm RZI 3
Large number of terminals RZA PE and s for RCCB Number of modules PE N N for RCCB 14 17 17-28 17 17 1x 5 42 24 24 1x 5 56 34 34 1x 5 4 RZB RZG Two s RZI s for RCCBs Two s for RCCBs Number of modules PE N N for RCCB 72 47 25 3x 7 96 47 25 3x 7 120 62 30 4x 7 144 62 30 5x 7 132 62 40 4x 7 165 82 40 5x 7 198 82 40 5x 7 Number of modules PE N N for RCCB 4 8 5-8 14 5 1x 5 14 14 5 1x 5 18 14 14 1x 5 24 2x 14 14 2x 5 40 2x 14 14 2x 5 42 2x 14 14 2x 5 56 2x 14 14 2x 5 Number of modules PE N N for RCCB 4 5 5-6 5 5-8 9 9-12 14 14-18 18 18-24 18 18-36 26 26-36 26 26-54 36 36 -
Invented for electricians RZA Two possibilities of interconnection of devices - interconnection of all devices out of the base - insertion of the frame with devices into the base - interconnection of devices in individual rows out of the base - gradual insertion of interconnected rows of devices into the base - it is not necessary to put conductors under several rails at the same time Variability of the assembly - PE, s can be placed both up and down - for RCCB can be placed in as many as ten places on the sides of the base - removable front frame with door - depth correction of wrong walling as much as 17 mm RZB Two possibilities of interconnection of devices - interconnection of all devices out of the base - insertion of the frame with devices into the base - interconnection of devices in the first row out of the base - insertion of the first row into the base after the puling through of conductors to the lower rows Variability of the assembly - all terminal blocks can be placed in both upper and lower positions - removable front frame with door - depth correction of wrong walling as much as 25 mm 5
STEEL-SHEET ENCLOSURES RZB Basic description For building, residential and similar installations. Colour: white (RAL 9003). Door: non-transparent, opening right/left. 24 and 33 modules in a row, 3 6 rows. Advantages Comfort space under the "U"rails. Large number of terminals. Spacing of the "U"rails 150 mm. Specifications For mounting devices on "U" rails according to EN 60715 of width 35 mm with cut-out in 45 mm cover plate. Removable frame with "U" rails. 1 module = 18 mm. Reinforced removable frame with "U" rails. Sheet front covers. RZB-Z RZB-N Installation flush-mounted wall-mounted Cable grommet - for 51 or 102 cables Material of front cover steel sheet Material of base steel sheet Material of door steel sheet Standards EN 62208 Degree of protection IP30 Stage of protection against external mechanical shocks IK09 Rated values of the used devices max. 125 A, AC 230/400 V Rated insulation voltage AC 500 V Device rail "U"rail according to EN 60715 of width 35 mm Protection class I Power loss dissipated by the surface of the enclosure ΔT = 15 K(difference between internal and external temperature) For installation on materials of fire reaction class A1, A2 according to EN 13501-1 Flush-mounted RZB-Z Door Non-transparent Number of rows x Order Terminal blocks N terminal Power Static load modules in a row code PE blocks for RCCBs loss Weight N (7x 16 mm²) [W] per a row total 72 3x 24 RZB-Z-3S72 OEZ:44451 PE 2x 25 mm² + 45x 16 mm² 3 pcs 80 7.85 23.5 11.7 1 96 4x 24 RZB-Z-4S96 OEZ:44452 N 2x 25 mm² + 23x 16 mm² 3 pcs 92 7.85 31.4 13.9 1 120 5x 24 RZB-Z-5S120 OEZ:44453 PE 2x 25 mm² + 60x 16 mm² 4 pcs 107 7.85 39.2 16.7 1 144 6x 24 RZB-Z-6S144 OEZ:44454 N 2x 25 mm² + 28x 16 mm² 5 pcs 121 7.85 47.1 19.3 1 Total number of modules 132 4x 33 RZB-Z-4S132 OEZ:44455 PE 2x 25 mm² + 60x 16 mm² N 2x 25 mm² + 38x 16 mm² 4 pcs 117 7.85 31.4 17.5 1 165 5x 33 RZB-Z-5S165 OEZ:44456 PE 2x 25 mm² + 80x 16 mm² 5 pcs 133 7.85 39.2 20.5 1 198 6x 33 RZB-Z-6S198 OEZ:44457 N 2x 25 mm² + 38x 16 mm² 5 pcs 140 7.85 47.1 23.1 1 Package [ks] Wall-mounted RZB-N Door Non-transparent 10 Number of rows x Order Terminal blocks N terminal Power Static load modules in a row code PE blocks for RCCBs loss Weight N (7x 16 mm²) [W] per a row total 72 3x 24 RZB-N-3S72 OEZ:44458 PE 2x 25 mm² + 45x 16 mm² 3 pcs 86 7.85 23.5 14.2 1 96 4x 24 RZB-N-4S96 OEZ:44459 N 2x 25 mm² + 23x 16 mm² 3 pcs 101 7.85 31.4 17.1 1 120 5x 24 RZB-N-5S120 OEZ:44460 PE 2x 25 mm² + 60x 16 mm² 4 pcs 115 7.85 39.2 20 1 144 6x 24 RZB-N-6S144 OEZ:44461 N 2x 25 mm² + 28x 16 mm² 5 pcs 130 7.85 47.1 22.9 1 Total number of modules 132 4x 33 RZB-N-4S132 OEZ:44462 PE 2x 25 mm² + 60x 16 mm² N 2x 25 mm² + 38x 16 mm² 4 pcs 127 7.85 31.4 19.9 1 165 5x 33 RZB-N-5S165 OEZ:44463 PE 2x 25 mm² + 80x 16 mm² 5 pcs 137 7.85 39.2 23.3 1 198 6x 33 RZB-N-6S198 OEZ:44464 N 2x 25 mm² + 38x 16 mm² 5 pcs 153 7.85 47.1 26.7 1 Package [ks]
STEEL-SHEET ENCLOSURES RZB Standard content of package Flush-mounted RZB-Z Base Three or four s for RCCBs Sheet front covers Removable frame with door Removable frame with "U"rails Set of mounting material Moreover a holder, including one for RCCB - at RZB-Z-.S120,165,198 Moreover a holder, including two s for RCCBs - at RZB-Z-.S144 Wall-mounted RZB-N Base with door Cable grommet (PD-B-CG51-IP54) Three or four s for RCCBs Sheet front covers Removable frame with "U" rails Set of mounting material Moreover a holder, including one for RCCB - at RZB-N-. S120,165,198 Moreover a holder, including two s for RCCBs - at RZB-N-.. S 144 11
STEEL-SHEET ENCLOSURES RZB Internal arrangement and equipment Applies to both flush-mounted and wall-mounted RZB Spacing of the "U" rails - 150 mm Terminal blocks Removable first "U" rail - fastened by screws Three s for RCCBs 150 mm Space under the "U" rails - plenty of space for the routing of conductors - 50 mm Reinforced frame - rigid full "U" rails - rivets/screws placed above each other Stops for installing the outer module - 24 or 33 modules Final completion Quick-acting closures with earthing washer External view Internal view - attachment of covers only by turning the screwdriver by 90 degrees - 100% safety unique conductive connection of the cover with the base Sheet front covers - in the base colour RAL9003 Locking - installation of the lock into the prepared hole next to the closing system - 2 keys with the same combination 12
STEEL-SHEET ENCLOSURES RZB Accessories Order code Product name Description Weight Package [pcs] PD-RB-UZU OEZ:44465 Lock 2 keys with the same combination 0.07 1 PD-RB-4MU OEZ:44467 Mounting anchors Set of 4 pcs 0.14 1 PD-RB-SB7N OEZ:44472 Terminal block N 7x 16 mm², insulation holder N 0.05 1 PD-RB-SB25 OEZ:44473 Terminal block PD-RB-SB30 OEZ:44474 Terminal block PD-RB-SB40 OEZ:44475 Terminal block PD-RB-SB47 OEZ:44476 Terminal block PD-RB-SB62 OEZ:44477 Terminal block PD-RB-SB82 OEZ:44478 Terminal block PD-RB-DSB24 OEZ:44479 Holder PD-RB-DSB33 OEZ:44480 Holder N 2x 25 mm²+ 23x 16 mm², self-adhesive printing tape N, 2 N insulation holders, connection material for installation to PD-RB-DSB24 N 2x 25 mm 2 + 28x 16 mm², self-adhesive printing tape N, 2 N insulation holders, connection material for installation to PD-RB-DSB24 N 2x 25 mm 2 + 38x 16 mm², self-adhesive printing tape N, 2 N insulation holders, connection material for installation to PD-RB-DSB33 PE 2x 25 mm 2 + 45x 16 mm 2, self-adhesive printing tape PE, connection material PE 2x 25 mm 2 + 60x 16 mm 2, self-adhesive tape PE, connection material PE 2x 25 mm 2 + 80x 16 mm 2, self-adhesive tape PE, connection material For RZB 24 modules in a row, holder for PD-RB-SB25 or PD-RB-SB30 and up to 3 pcs of PD-RB-SBN7 For RZB 33 modules in a row, holder for PD-RB-SB40 and up to 4 pcs of PD-RB-SBN7 0.23 1 0.29 1 0.38 1 0.33 1 0.39 1 0.52 1 0.26 1 0.38 1 PD-RB-DVA4PS OEZ:44470 Pocket Plastic, fastening - self-adhesive tape, A4 0.01 1 PD-R-ZAS1000-B OEZ:44471 Blind plate Width 1 000 mm (55 modules), white 0.05 1 PD-RB-1LEM24 OEZ:44468 Welt PD-RB-1LEM33 OEZ:44469 Welt Around the hole for cables, width 24 modules in a row, for 1 hole buckled in a maximum extent. Around the hole for cables, width 33 modules in a row, for 1 hole buckled in a maximum extent 0.06 1 0.07 1 Basic external dimensions RZB Flush-mounted RZB-Z H Wall-mounted RZB-N Width S Height V Depth H RZB-Z-3S72 572 642 147 RZB-Z-4S96 572 792 147 RZB-Z-5S120 572 942 147 RZB-Z-6S144 572 1092 147 RZB-Z-4S132 734 792 147 RZB-Z-5S165 734 942 147 RZB-Z-6S198 734 1092 147 S V Width S Height V Depth H RZB-N-3S72 542 605 155 RZB-N-4S96 542 755 155 RZB-N-5S120 542 905 155 RZB-N-6S144 542 1055 155 RZB-N-4S132 704 755 155 RZB-N-5S165 704 905 155 RZB-N-6S198 704 1055 155 H 13