AC centrifugal fan. forward curved, dual inlet with housing (flange)

Similar documents
AC centrifugal fan. forward curved, dual inlet with housing (without flange)

AC axial fan. sickled blades (S series)

AC axial fan. sickled blades (S series)

AC centrifugal fan. forward curved, dual inlet with housing (flange)

AC centrifugal fan. backward curved

AC centrifugal fan with housing (small flange)

AC axial fan. blades with special design (K series) with guard grille for full nozzle

AC axial fan. straight blades (A series) with full round nozzle

AC centrifugal fan. backward curved

AC axial fan. sickled blades (S series) with full square nozzle

AC axial fan. sickled blades (S series), single inlet Wall ring with guard grille

AC axial fan. sickled blades (S series) Wall ring with guard grille

AC centrifugal fan - RadiCal

AC axial fan. sickled blades (S series) with guard grille for full nozzle

AC axial fan. sickled blades (S series) with guard grille for full nozzle

AC axial fan. Limited partnership Headquarters Mulfingen County court Stuttgart HRA

AC centrifugal fan. forward-curved, dual-intake with housing (without flange)

AC centrifugal module - RadiCal

AC centrifugal fan. forward-curved, single-intake with housing (flange)

Energy-saving motors (ESM)

AC axial fans, AC diagonal fans

Product Data Sheet ACi 4420 HHR

AC Fans. AC Fans Overview 117. AC Axial Fans 118. AC Radial Fans 138. Technology. DC Axial Fans. DC Radial Fans. Specials. ACmaxx Axial Fans.

Product Data Sheet 8412 NHU-519

Product Data Sheet 624 NR. The engineer's choice

Product Data Sheet DV5214 NU

AC axial fans S series, Ø 500

Energy-saving axial fans. A solution specifically designed for unit cooler applications. The engineer s choice. 10-Position rotary switch

Product Data Sheet 4118 N/ The engineer's choice

Product Data Sheet 8314 HR-197

Product Data Sheet ACi 4420 MLR

Product Data Sheet 632 NU-006

Product Data Sheet 4184 N/17X. The engineer's choice

Product Data Sheet 614 N/2HH-169 The engineer's choice

CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS

Product Data Sheet 3214 JH3-195

Product Data Sheet 8412 N/ The engineer's choice

Product Data Sheet 3214 J/2H3F-191

Voltage 400V 3N 50Hz. L W H Weight Fans Surface. Air Flow [m 3 /h] Primary [m 2 ] Ø [mm]

The new fan generation S-Force

Listen to the difference. The AxiTop diffuser.

Product Data Sheet 4184 NXHH

CENTRIFLOW 3D WITH EC MOTOR >> Technical catalogue

RadiPac EC centrifugal fans. New dimensions in efficiency: sizes 630 1,000

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303

product specification

Series VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.

4314/17T. Product Data Sheet INDEX

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue

Page - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART BEST ONE 202 PERFORMANCE CHART BEST ONE VOX 203

Unobox units with backward curved centrifugal impellers

TYPE 2 poles 4 poles 6 poles 8 poles 2 / 4 poles 4 / 8 poles 2 / 8 poles 4 / 16 poles

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge

- SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART MULTIGO PERFORMANCE CHART MULTIGO

IBExU Institut für Sicherheitstechnik GmbH

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART DW 204 PERFORMANCE CHART DW VOX 205

SV-UNOBOX FAN. Mutassim Al-Daour factory for Metal Industries SV-7

Device can only be used indoors. Not suitable for polluted air or volatile and explosive gases. Single phase speed controller.

CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

Data sheet: Wilo-TOP-S 40/4 (1~230 V, PN 6/10)

Cross-flow Fans. TFD/FFD Series

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

Motors- Basic principles. Expertise, performance, innovation

Product Data Sheet 4184 NXHH

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL SEAL 301

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

- CONTENTS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO

Cross-Flow Fans. TF/FF Series

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303

(%$5$ PUMPS EUROPE S.p.A. &(175,)8*$/38036':2. &217(176 50Hz

- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 TYPE KEY 202 PERFORMANCE CHART DW 203 PERFORMANCE CHART DW VOX 204

VARIABLE SPEED WATER BOOSTER SETS WITH MULTISTAGE VERTICAL ELECTRIC PUMPS FLOW RATES UP TO 400 m 3 /h. 50 Hz GHV30 GHV40 SERIES

Submersible Stainless Steel Semi-Vortex Pumps Pumps

Dynamically-balanced impellers with extremely robust cores CMP T 5.5

IN-LINE CENTRIFUGAL DUCT FANS VT Series

AXIAL FAN WITH EXTERNAL ROTOR MOTOR

Series VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h

CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series

VKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.

- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX

Data sheet: Wilo-TOP-Z 30/10 (1~230 V, PN 10, RG)

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

CENTRIFUGAL IN-LINE FANS VENT Series

Series VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.

Positive displacement batch controller

MVSI. Technical features

TD-SILENT Series (160 to 1000 models)

AGA-AGC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

Series VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting

Brushless internal rotor motors ECI series. Drive solutions Industrial drive engineering

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions

Protection against mechanical impacts IK 08 according to IEC 68, EN Insulation class Class F (155 C), class H (180 C) on request.

Data sheet: Wilo-TOP-S 40/10 (1~230 V, PN 6/10)

VKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.

Product Data Sheet 4414/2H

Technical Data DML. Submersible Sewage Pumps with Single Channel Impeller. DML_Techdata_SS_V11 EBARA PUMPS AUSTRALIA PTY. LTD.

MegaBox Product-specific information

Transcription:

ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone: +49(0)7938/81-0 Fax: +49(0)7938/81-110 info1@de.ebmpapst.com www.ebmpapst.com Nominal data Type Motor D2E133-AM47-23 M2E068-DF Phase 1~ 1~ Nominal voltage V Frequency Hz Type of data definition rfa ml Valid for approval / standard CE CE Speed min -1 10 1800 Power input W 190 Current draw A 0.84 0.88 Motor capacitor μf 3 3 Capacitor voltage VDB 4 4 Min. back pressure Pa 0 100 Max. ambient temperature C 35 25 ml = max. load me = max. efficiency rfa = running at free air cs = customer specs cu = customer unit Subject to alterations tem no.: 10195-5-9980 Revision status: KM65103 Print-out on 08/04/2011 Y. Uhlmann (VM-TDO) Page 1 of 5

Technical features Leackage current General description Size Operation mode Direction of rotation Mounting position Humidity class nsulation class Cable exit Condensate discharge holes Motor bearing Mass Housing material Material of impeller Motor suspension Motor protection Product conforming to standard Surface of rotor < 0.75 ma With flange 133 mm S1 Clockwise, seen on rotor Any F0 "B" Axial None Ball bearing 3.5 kg Type of protection P 44 Protection class Max. permissible ambient motor temp. (transp./ storage) Min. permissible ambient motor temp. (transp./storage) Approval Sendzimir galvanized sheet steel Sendzimir galvanized sheet steel Motor mounted via brackets on one side Thermal overload protector (TOP) wired internally CE; EN 335-1 Partially cast in aluminium +80 C -40 C CCC; GOST tem no.: 10195-5-9980 Revision status: KM65103 Print-out on 08/04/2011 Y. Uhlmann (VM-TDO) Page 2 of 5

Product drawing 1 Connection line PVC, 4x brass lead tips crimped Connection screen U1 blue Z brown U2 black PE green/yellow tem no.: 10195-5-9980 Revision status: KM65103 Print-out on 08/04/2011 Y. Uhlmann (VM-TDO) Page 3 of 5

Charts: Air flow Hz Measurement: LU-105263 Air performance measured as per SO 5801 nstallation Category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per SO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. Measured values 1 2 3 4 U V f Hz n min -1 10 1890 2310 2570 P 1 W 190 164 141 118 A 0.84 0.72 0.61 0.52 qv m 3 /h 710 640 4 295 p sf Pa 0 102 275 tem no.: 10195-5-9980 Revision status: KM65103 Print-out on 08/04/2011 Y. Uhlmann (VM-TDO) Page 4 of 5

Charts: Air flow Hz Measurement: LU-105265 Air performance measured as per SO 5801 nstallation Category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per SO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. Measured values 1 2 3 4 U V f Hz n min -1 1800 2310 2685 2945 P 1 W 181 170 159 A 0.88 0.78 0.74 0.70 qv m 3 /h 565 425 300 180 p sf Pa 100 300 375 tem no.: 10195-5-9980 Revision status: KM65103 Print-out on 08/04/2011 Y. Uhlmann (VM-TDO) Page 5 of 5