96 Pressure Switches Electronic Pressure Switches Electronic
E.5 switching output Electronic pressure switches, High-Performance series with one switching output Outstanding overpressure protection (up to 4 x) Ideal choice for mobile hydraulic applications Long service life even under high pressure change rates All welded design, no elastomeric seal Wetted parts made of stainless steel and titanium ensuring excellent media compatibility Silicon-on-sapphire technology (SoS) for highest reliability, accuracy and reliable process monitoring Very low temperature error and very good long-term stability Adjustment of switching point and hysteresis at factory For versions with switching outputs, please refer to chapter E.6, page 6
Electronic pressure switches, High-Performance series Technical details Type: 0530 NO 053 NC 053 NO 0533 NC Number of transistor outputs: PNP output (High Side N-channel MOSFET) NPN output (Low Side N-channel MOSFET) Supply voltage: 9,6-3 VDC Idle power consumption: < 5mA Standard adjustment range p nom : 0 0 bar 0 5 bar 0 00 bar 0 50 bar 0 600 bar ) Overpressure protection p u : 40 bar 00 bar 400 bar,000 bar,650 bar Burst pressure ) : 80 bar 00 bar 800 bar,000 bar,000 bar Mechanical life expectancy: Permitted pressure change rate: Switching point adjustment range: Hysteresis: Accuracy: Resolution: Switching delay: Output: Operating mode: 0,000,000 pulsations at rise rates to 5 bar/ms p nom 5 bar/ms 00 % of the nominal pressure range (Full Scale, FS), programmable at factory 0. 99.8 % of the nominal pressure range (FS), programmable at factory (set to 5% of the switching point as standard) ±0.5 % of the nominal pressure range (FS) at room temperature, ±0.5 % BFSL 0. % of the nominal pressure range (FS) ON (0 0.5 s) / OFF (0 s) delay in increments of ms, irrespective of switching point, programmable at factory (specify value when ordering, otherwise default value of 0 s is set) 0.5 A transistor output with short-circuit and overvoltage protection with hysteresis or window function (see page 0), programmable at factory Long term stability: ±0. % FS p. a. Repeatability ) : Temperature error ) : Compensated temperature range: Temperature range media: Temperature range ambient: Wetted parts material: ±0. % FS ±0.0 % / K FS -0 C +80 C (- 4 F +76 F) - 40 C +5 C (- 40 F +57 F) - 40 C +00 C (- 40 F + F) Stainless steel.4305 (AISI 303) and titanium E Housing material: Stainless steel.4305 (AISI 303) Insulation resistance: > 00 MΩ (500 VDC, Ri > 4 Ω) Switching time: < ms Vibration resistance: 0 g at 4 000 Hz sine wave; DIN EN 60068--6 Shock resistance: half sine wave 500 m/s²; ms; DIN EN 60068--7 Protection class: Refer to the electrical connections EMC: EMC 04/30/EU, EN 6000-6-:005, EN 6000-6-3:007 Protection against reverse polarity, short-circuit and over voltage surges: built-in Weight: approx. 80 g (DIN 7530 approx. 0 g, cable version approx. 35 g) ) Static pressure. Dynamic value is 30 to 50 % lower. Values refer to the hydraulic/pneumatic part of the electronic pressure switch. ) Within the compensated temperature range. 3
E.5 switching output 0530 / 053 / 053 / 0533 Electrical connectors and threads DIN EN 7530-803 - A M DIN EN 6076 - - 0 A ISO 570 - A - 4. AMP Superseal.5 d PE 3 LED 4 3 3 4 3 x Uv+ 3 U out PE PE IP65 x ~ 60 / 76 mm* d ~ Ø 30 mm Order number: 03 Uv+ nc 3 Gnd 4 Out x ~ 54 mm d ~ Ø mm Order number: 00 Uv+ 3 U out 4 nc, IP6K9K x ~ 65 mm d ~ Ø 7 mm Order number: 004 Out 3 Uv+ x ~ 73 mm d ~ Ø 6 mm Order number: 007 * x ~ 60 mm without coupler socket, x ~ 76 mm with coupler socket Deutsch DT04-4P Deutsch DT04-3P Cable connection Connection diagrams High Side Output (PNP) Low-Side Output (NPN) Load assignment depending on electrical connections *OUT only for series 054x Gnd Uv+ 3 nc 4 Out, IP6K9K x ~ 74 mm d ~ Ø 3 mm Order number: 008 Uv+ 3 Out, IP6K9K x ~ 74 mm d ~ Ø 3 mm Order number: 00 red white black Uv+ Out Gnd x ~ 44 mm (+ 0 mm bend relief ) cable length ~ m d ~ Ø mm Order number: 0 Load assignment depending on electrical connections *OUT only for series 054x FKM- Sealing ring G /4 DIN EN ISO 79- (DIN 385-), form E G /4 DIN 385-A Thread code: 4 Thread code: 03 Thread code: 04 Thread code: 09 0 NPT /8 4,5 NPT /4 8 9,4 9.93.3 FKM- Sealing ring 4 RoHS II compliant M0x DIN 385-A 7/6-0 UNF 9/6-8 UNF M4x,5 DIN EN ISO 9974- (DIN 385-), form E Thread code: 30 Thread code: 0 Thread code: Thread code: 4
0530 / 053 / 053 / 0533 Order matrix for electronic pressure switches E.5 switching output Type Adjustment range Pressure connection Pressure unit Electrical connection Type PNP output (High Side), NO 0530 PNP output (High Side), NC 053 NPN output (Low Side), NO 053 NPN output (Low Side), NC 0533 Max. Overpressure ) Burst pressure Adjustment range ) 40 bar 80 bar 00 bar 00 bar 400 bar 800 bar,000 bar,000 bar,650 bar,000 bar 0-0 bar (approx. 45 PSI) 0-5 bar (approx. 36 PSI) 0-00 bar (approx..450 PSI) 0-50 bar (approx.. 3.60 PSI) 0-600 bar (approx. 8.700 PSI) 0 5 0 5 60 Pressure connection G /4 DIN EN ISO 79- (DIN 385-), form E 4 G /4 DIN 385-A 03 NPT /8 (max. 50 bar) 04 NPT /4 09 M0x zyl. DIN 385-A (max. 50 bar) 30 E 7/6 0 UNF (max. 50 bar) 0 9/6 8 UNF M4x,5 DIN EN ISO 9974- (DIN 385-), form E 4 Pressure unit bar B Electrical connection DIN EN 7530-803-A (DIN 43650-A); socket device included 03 M - DIN EN 6076--0-A 00 Bayonet ISO 570-A-4. (DIN 7585-A-4.) 004 AMP Superseal.5 007 Deutsch DT04-4P 008 Deutsch DT04-3P 00 Cable connection (length of cable m standard) 0 Ordner number: 05XX XXX XX B XXX ) Please state switching point and hysteresis when ordering. ) Static pressure, dynamic pressure 30 to 50% lower. Value refers to the hydraulic or pneumatic part of the electronic pressure switch. RoHS II compliant 5