Type of operation Depending on requirement either one or two dry DC-solenoid,

Similar documents
Applications. NG 6 according to DIN 24340/ISO 4401 CETOP RP 121 H

Seated valves. Type WV700 NG 6 ISO up to 25 l/min, up to 700 bar. Features. Applications. Design. Technical data

Subplates (AP) and multi-station subplates

Seated valve 500 Type WVM-4B NG 4 up to 12 l/min

Seated valve bidirectional Type WVM-4B-Bi

Seated valve 500 Type WVM-4B NG 4 up to 12 l/min

Type KKP. Combination pumps

Seated valves 500 bar

Applications. mineral oil according to DIN (other fluids on request) at 25 l/min (fully open) and 32 mm 2 /s: 155 bar

Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P

Compact hydraulic power unit Type BKA

Directional Control Valve Series D3W Soft Shift

Pilot-Operated Directional Control Valves Series D3 - D11

Directional Control Valve Series 4D01 (DENISON)

Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW

Directional Control Valve Series D3W (Parker), 4D02 (Denison)

Combination pumps Type BKP

Pilot Operated Pressure Relief Valve Series R5V (Denison)

Special Radial piston pumps Type SRK-ATEX

Directional Control Valve Series D1VW

Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW

Directional Seat Valve Series D4S (Denison)

Proportional Pressure Reducing Valves Series PE*W (Parker), R4R (Denison)

Introduction. Pressure drops

DIRECTIONAL CONTROL VALVES CETOP 3/NG6

Proportional Pressure Relief Valve Series RE*T

Chapter 2: Directional Control Valves

Directional Control Valve

4/3, 4/2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid

Bieri Hydraulik standard components from 500 up to 1000 bar High pressure hydraulic systems for various applications

Chapter 5: Flow Valves

DIRECTIONAL CONTROL VALVES CETOP3

Available manual, pneumatic, and hydraulic spool control kits.

RPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004

Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.

Chapter 6: Check Valves

Pilot Operated Proportional DC Valve Series D*1FW / D*1FT

RNEH4-25. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2012

6/2 WAY DIRECTIONAL VALVE KV (NG 6)

Chapter 10: Valves for Pipe Mounting

SD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012

Throttle Check Valve Series FM

DIRECTIONAL CONTROL VALVES CETOP3

Pilot-Operated Proportional DC Valve Series D*1FH

RPEH4-16. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2002

Symbol RH F... GENERAL DESCRIPTION. 4/3- and 4/2- way directional control valves with solenoid operation, heavy duty construction

Proportional Throttle Valves Series TDL

RPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007

RPE2-04. Functional Description HA /2002. Solenoid Operated Directional Valves. Replaces HA /2000

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve

RPEW4-10. Functional Description HA /2012. Solenoid Operated Directional Control Valves with Wirebox. Replaces HA /2006

Chapter 5: Flow Valves

Chapter 6: Check Valves

HFCETOP3NG6valves. CETOP 3 NG6 valves for hydraulic power packs and other hydraulic applications. HF CETOP 3 NG6 valves

RSP 7-06 R S P FUNCTIONAL DESCRIPTION ORDERING CODE. DIRECTIONAL CONTROL VALVES KE /13 D n 06 p max 32 MPa Q max 80 dm 3 /min

3/2 and 4/2 directional seat valves with solenoid actuation

Q max 300 l/min. Fluid temperature range C Fluid viscosity range cst Recommended viscosity cst 25

Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT

3/2 Solenoid Cartridge Valve, Size 6

Pressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features

Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:

VER03M CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES VER03M - PROPORTIONAL PRESSURE RELIEF VALVES

S.A. 193 Stefan Cel Mare str., 2400 Sibiu -Romania

DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C

VINCKE INDUSTRIAL HYDRAULIC VALVES INTRODUCTION

DSH* /117 ED LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO DSH5 ISO

D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 41

RPE3-04. Functional Description HA /2013. Directional Control Valves Solenoid Operated. Replaces HA /2010

Directional spool valve type WMM 16 hand lever operated

General Specifications DRV DRV-Exm DRV-Exd

4/3-4/2 Directional valve with solenoid actuation

Functional Description

HY-SPEC CATALOGUE - HYDRAULIC VALVES. Hydraulic Valves. Visit our website Catalogue

Standard valves to ISO Product range overview

Series PD directly operated solenoid valves

DIRECTIONAL CONTROL VALVES CETOP 5/NG10

SOLENOID DIRECTIONAL VALVE

Pressure relief valve, direct operated, with DC motor actuation. Type DBGT. Features. Contents. RE Edition:

Check-Q-meter type FD

Pressure control valves type AGIR, AGIS, AGIU two stage, subplate mounting, ISO 5781 sizes 10, 20 and 32

DL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min

ADB.3... DIRECTIONAL CONTROL

Series P directly operated solenoid valves

Series PD directly operated solenoid valves

Pilot operated check valves, Types SV and SL...40B/ (new series) Huade América 1

Proportional directional valve, pilot-operated, with integrated electronics (OBE)

Proportional cartridge throttle valve, with inductive position transducer, pilot operated

DIRECTIONAL CONTROL VALVES CETOP 5/NG10

Size 6 10 up to 31.5 MPa up to 120L/min

LOGIC ELEMENTS SERIES 10 LC* LP* /103 ED CARTRIDGE VALVES ISO DIN COVERS FOR CARTRIDGE VALVES ND

DSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min

CONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES

Q max (see specifications table)

Proportional pressure reducing cartridges type LIRCZO normally closed, ISO 7368 sizes from 16 to 40

Proportional flow control valve, 2-way version

2/2-way proportional seat valve

2/2 Solenoid Cartridge Valve, Size 10

Pneumatic Valve 4V100 Series

MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15

Directional valve elements L808103P (ED4-PT1) of Tank unloaded excess flow. RE Edition: Replaces:

Transcription:

Features Leakage free High availability 100% duty cycle Porting NG 6 according to DIN 24340 Positive overlap Function and design The seated valves are direct operated. Depending on the desired control function up to four valve cartridges are used. The poppets which are situated in the cartridge are pressed on the valve seat via springs or are opened via tappets. Hardened poppets and valve seats ensure long life. Pressure compensated poppets reduce the operating power. Type of operation Depending on requirement either one or two dry DC-solenoid, pneumatic or hydraulic control or a manual control lever is mounted onto the valve block. Technical data Hydraulic fluid mineral oil according to DIN 51524 (other fluids on request) Fluid temperature range NBR: -30 to 80 C FPM: -20 to 80 C Ambient temperature range -30 to 50 C Viscosity range 5 to 400 mm 2 /s (optimal: 10 to 68) Porting NG 6 according to DIN 24340/ISO 4401 CETOP RP 121 H Operating pressure max. connection P, A, B 700 bar Pressure admissible max. connection T 350 bar Flow rate max. 25 l/min Filtration according to NAS 1638, class 6 or ISO/DIN 4406 15/12 Weight see dimension drawings Duty cycle 100% Power solenoid 12 VDC 30 W solenoid 24 VDC 31 W solenoid 107 VDC 37 W solenoid 196 VDC 40 W Power tolerance +/- 10 % Degree of protection according to DIN 40050 IP 65 Switching time 40 120 ms Surface finish of the valves steel: galvanized, black chromated

xp:wv700_d.qxp 22.5.2008 13:52 Uhr Seite 6 xp:wv700_d.qxp 22.5.2008 13:52 Uhr Seite 6 xp:wv700_d.qxp 22.5.2008 13:52 Uhr Seite 6 V700_d.qxp:WV700_d.qxp 22.5.2008 13:52 Uhr Seite 6 2/8 2/2-WS 2/2-WO 2/2-VS 2/2-VO Weight 2,4 kg Weight 1,9 kg 3/2-L 3/2-N Valves type L and N with negative overlap. Weight 2,4 kg Weight 1,9 kg

WV700_d.qxp:WV700_d.qxp 22.5.2008 15:12 Uhr Seite 7 WV700_d.qxp:WV700_d.qxp 22.5.2008 15:12 Uhr Seite 7 3/8 3/3-F 3/3-K 3/3-G 3/3-GB F, K: Weight 3,1 kg F, K, G, GB: Weight 1,9 kg G, GB: Weight 3,4 kg Function L1 L2 L3 L4 G 256 16,5 13 0 GB 256 16,5 0 13

4/8 4/2-C 4/2-D Valves type C and D with negative overlap. Weight 2,6 kg Weight 2,1 kg manual operated L1 detent HR 13 spring return HF 39

WV700_d.qxp:WV700_d.qxp 22.5.2008 16:14 Uhr Seite WV700_d.qxp:WV700_d.qxp 22.5.2008 16:14 Uhr Seite WV700_d.qxp:WV700_d.qxp WV700_d.qxp:WV700_d.qxp 22.5.2008 22.5.2008 16:14 16:14 16:14 Uhr Uhr Uhr Seite Seite Seite 5 5 5/8 4/3-H A 4/3-E WV700_d.qxp:WV700_d.qxp 22.5.2008 16:14 Uhr Seite 5 WV700_d.qxp:WV700_d.qxp 22.5.2008 16:14 Uhr Seite 5 4/3-P 4/3-J 4/3-M 4/3-R 4/3-U H, E, P, J, M, R: Weight 3,4 kg H, E, P, J, M, R: Weight 1,9 kg Function L1 L2 L3 L4 H, E, P, J, M 243 16,5 0 0 P 256 16,5 13 0 R 256 16,5 0 13 3,9 kg 3,9 kg U. Weight 2.9 2,92.9 kg kg kg 3,9 kg 2.9 kg 3,9 kg 3,9 kg 2.9 2.9 kg 3,9 3,9 kg kg 2.9 2.9 kg kg kg 3,9 kg 2.9 kg U. Weight 3,9 kg 3,9 kg 2.9 kg

6/8 Characteristic measured at ν = 32 mm 2 /s bar l/min Solenoid operated valves Manual operated valves Direction of flow Function P-A P-B A-T B-T P-T C 3 3 2 2 D 3 1 1 2 E, J, M 3 2 2 3 F 3 3 2 G 2 2 3 GB 3 3 4 H 1 1 1 1 2 K, L, N 2 3 P 3 2 3 2 3 R 2 3 2 3 3 U 5 5 4 4 3 VO, VS 2 WO, WS 2 Direction of flow Function P-A P-B A-T B-T P-T C 2 3 2 1 D 1 2 1 1 E 1 1 2 1 F 3 3 2 G 1 1 2 GB 2 2 3 H 1 1 1 1 1 J, M 3 2 2 3 K 2 2 L, N 2 3 P 2 3 3 3 3 R 2 3 2 3 3 U, WS 5 5 4 4 3 VO, VS 2 WO 2 Max. switching power measured at ν = 32 mm 2 /s, T = 40 C bar Function Line F, G, GB, H, J, M, P, R X C, D, K, L, N, VS, WO Y E, VO, WS Z U W l/min

7/8 Dimension drawings Hydraulic control Pneumatic control Sectional drawing Valve width Accessories If supply voltage of 120 VAC (107 VDC) or 230 VAC (196 VDC) is used, the plugs must be fitted with rectifiers. Plug with rectifier for A-solenoid (grey) part no. 903438 Plug with rectifier for B-solenoid (black) part no. 903439 For each valve the following is included: 4 pieces O-rings 9,25 x 1,78 mm 90 ShA part no. 900195 For solenoid valves: 1 plug for A-solenoid (grey) part no. 901764 and/or 1 plug for B-solenoid (black) part no. 901762 Tie bolts / fixing screws as well as subplates and multi-station subplates see technical data sheet AP / RP Operating instructions see BA-BV700

8/8 Ordering code: Example WV 700-6 - 4 / 2 - C - 24 - P - 00 Seated valve Type BV700 Size 6 Special design 01... 99 (00 for standard) Ports 2, 3, 4 Positions 2, 3 Functions see table Operated by 12 solenoid 12 VDC 24 solenoid 24 VDC 107 solenoid 107 VDC 196 solenoid 196 VDC HF manual, spring returned HR manual, detent AIR pneumatic control 3 7 bar OIL hydraulic control 100 630 bar Part index Please leave it blank (small letters a-z; different letters do not effect inter changeability) Design revision Capital letters A-Z; identical letters equal same connecting dimensions Seals P (NBR) V (FPM) As we are constantly improving our products, Bieri reserves the right to make changes to the technical specification without prior notice. WV700-EN-1008 Bieri Hydraulik AG Könizstrasse 274 CH-3097 Liebefeld/Switzerland Tel. +41 31 970 09 09 Fax +41 31 970 09 10 sales@bierihydraulics.com