Sections Price Extras Pounds Sterling Effective on all deliveries from 01 April 16 PRICE LIST SASPL:ENG:0416 This document shows price extras only. The invoiced price comprises these extras plus basis price, carriage, VAT and any other tax relating to the sale and delivery of the goods. price constitutes the following attributes; Minimum of 5 tonnes (per size and length) specification (S355JR) Standard length Net monthly payment terms Single delivery point full unit load Order to be placed 8 weeks prior to rolling (ex mill material) Material to be taken 2 weeks after date made available (ex mill material) Standard service offering All requirements outside of the basis price will be subject to price extras as listed. prices are provided by British Steel. Weight Material is charged on the calculated weight based on the weight per metre (1 decimal point) as specified in BS4-1, EN056-2, multiplied by the ordered length. The standard weights are derived from the cross sectional area on the basis of 0.785kg per cm² per metre length. The maximum weight of an individual bar is tonnes. Note; the third element of the section designation is that detailed within the appropriate standard and should not be used to calculate or verify invoiced weights. Prices All prices in this list are in GBP/tonne and do not include value-added tax or any other tax relating to the sale and delivery of the goods. All transactions are subject to British Steel s Standard Conditions of Sale. Specifications are subject to acceptance and not all combinations of extras are necessarily available. For specific information about products and their availability, please consult British Steel. Quality assurance British Steel has been approved by Lloyd s Register Quality Assurance to EN ISO 9001, including the production and supply of sectional products and extra finishing operations. Additionally Lloyd s Register has approved British Steel s Section Mills Quality Management Systems and Factory Production Controls in accordance with the Construction Products Directive. As appropriate, British Steel sections will be supplied with a test certificate showing the CE mark. Terms and conditions of sale All prices are published or quoted on the basis of British Steel s Standard Conditions of Sale. The latest version of these conditions is available at www.britishsteel.co.uk/terms-conditions/ Rolling tolerances All sections are rolled to the tolerances in EN034, EN279, EN056-2, BS4-1. Material will be tested in accordance with the relevant standard. Test certificates One copy of the test certificate will be routinely supplied to the customer by British Steel. 1 BUILDING STRONGER FUTURES
Illustration of price calculation In most simple terms the price of sections is determined by adding the following elements of the pricing extras. price (customer specific) Product extras (pages 2-6) Carriage (customer specific) Example Section requirements Steel specification Length Time order placement bars UB 254x146x43 (11.782 tonnes) EN 025-2 S355J0 13,700mm 8 weeks prior to rolling Price Calculation (per tonne) / price extra UB 254 x 146 x 43 Quality extra Length extra Time Based extra - Quantity extra 0 Price ex basing point, excluding delivery extras plus 38 per tonne and VAT. A. PRODUCT EXTRAS 1. PRODUCTS Products have been classified according to weight per linear metre; the table describes the section size applicable to the weight category and the extra applicable per size. 1.1 Universal Beam (UB) and Universal Column (UC) UB Weight group () Weight group () 7 x 76 2 x 89 178 x 2 3 x 2 3 x 133 254 x 146 254 x 2 305 x 2 305 x 7 305 x 1 356 x 7 356 x 171 6 x 1 6 x 178 x 13 x 16 x 19 x 23 x 30 x 25 x 43 x 37 x 31 x 28* x 25 x 22 x 33* x 28* x 25 x 48* x 42* x 37 x 54 x 46 x x 39* x 33* x 57 x 51 x 45 x 53* x 46 x 39 x 85* x 74 x 60 x 54 * Subject to availability 13.0 16.0 19.0 23.1 30.0 25.1 43.0 37.0 31.1 28.3 25.2 22.0 32.8 28.2 24.8 48.1 41.9 37.0 54.0 46.1.3 39.1 33.1 67.1 57.0 51.0 45.0 53.3 46.0 39.0 85.3 74.2 67.1 60.1 54.1 0-0- 0-457 x 2 457 x 191 533 x 1 533 x 2 533 x 3 6 x 178 6 x 229 6x 305 x 82* x 74* x 60 x 52 x 161* x 133* x 6* x 98 x 89 x 82 x 74 x 85* x 74* x 66* x 138* x 2 x 9 x 1 x 92 x 82 x 272* x 219* x 2* x 1* x 0* x 92* x 82* x 1 x 5 x 113 x 1 x 238 x 179 x 149 82.1 74.2 67.2 59.8 52.3 161.4 133.3 5.8 98.3 89.3 82.0 74.3 67.1 84.8 74.7.7 138.3 2.0 9.0 1.0 92.1 82.2 273.3 2.8 1.5 1.6 0.3 92.2 81.8 139.9 5.1 113.0 1.2 238.1 179.0 149.1 0-300 0-300 0-300 0 1 2
1.1 Universal Beam (UB) and Universal Column (UC) UB Weight group () 686 x 254 x *.2 x 2* 2.5 x 1 1.1 1 x 5 5.2 1 762 x 267 x 197* 196.8 x 173 173.0 x 147 146.9 1 x 134 133.9 1 838 x 292 x 226 226.5 0-300 x 194 193.8 x 176 175.9 914 x 305 x 289 289.1 0-300 x 253 253.4 0-300 x 224 224.2 0-300 x 1 0.9 0-300 914 x 419 x 388 388.0 0 x 343 343.3 0 16 x 305 x 487* 487.0 x 438* 438.0 x 393* 393.0 x 349* 349.0 x 314* 314.0 x 272* 272.0 0-300 x 249* 249.0 0-300 x 222* 222.0 0-300 UC 2 x 2 3 x 3 254 x 254 305 x 305 x 51* x 44* x 37 x 30 x 23 x 7* x 113* x 0* x 86 x 71 x 60 x 52 x 46 x 167 x 132 x 7 x 89 x 73 x 283 x 2 x 198 x 8 x 137 x 1 x 97 51.2 44.0 37.0 30.0 23.0 7.5 113.5 99.6 86.1 71.0 60.0 52.0 46.1 167.1 132.0 7.1 88.9 73.1 282.9 2.0 198.1 8.1 136.9 117.9 96.9 Weight group () 0-300 0-300 UC - continued 305 x 305 356 x 368 356 x 6 x 283 x 2 x 198 x 8 x 137 x 1 x 97 x 2 x 177 x 3 x 9 x 634 x 551 x 467 x 393 x 3 x 287 x 235 282.9 2.0 198.1 8.1 136.9 117.9 96.9 1.9 177.0 2.9 9.0 633.9 551.0 467.0 393.0 339.9 287.1 235.1 Weight group () 0-300 0-300 0-300 600+ 0-300 0-300 1.2 Universal Bearing Pile (UBP) UBP 3 x 3 254 x 254 305 x 305 356 x 368 x 54 x 45 x 85 x 71 x 63 x 223 x 6 x 149 x 6 x 1 x 95 x 88 x 79 x 174 x 2 x 133 x 9 53.9 44.9 85.1 71.0 63.0 222.9 6.0 149.1 6.1 1.0 94.9 88.0 78.9 173.9 2.0 133.0 8.9 Weight group () 0-300 1 300 0 0 0 0 Please note a minimum batch size may apply, individual requirements for Bearing Piles should be discussed with British Steel prior to order placement. * Subject to availability 3
1.3 Asymmetric Beam (ASB) ASB 280 ASB 74 73.6 280 ASB 0 0.3 280 ASB 5 4.7 280 ASB 4 3.9 280 ASB 136 136.4 300 ASB 3 2.8 300 ASB 5 5.4 300 ASB 5 4.6 300 ASB 196 195.5 300 ASB 237 237.1 300 ASB 249 249.2 1.4 Parallel Flange Channels (PFC) PFC PFC 5 x x 14.8 PFC 1 x 75 x 17.9 PFC x 75 x.3 PFC 0 x 75 x 23 23.4 PFC 1 x 90 x 24 23.9 PFC x 90 x 26 26.1 PFC 0 x 90 x 30 29.7 PFC 230 x 75 x 26 25.7 PFC 230 x 90 x 32 32.2 PFC 260 x 75 x 28 27.6 PFC 260 x 90 x 35 34.8 PFC 300 x 90 x 41 41.4 PFC 300 x 0 x 46 45.5 PFC 380 x 0 x 54 54.0 PFC 430 x 0 x 64 64.4 S355J0 Please be advised minimum tonnages are required for this particular product. Please contact us for more information Rolled sections with wide bottom flanges. These beams have a surface embossment on the top flange to develop action with concrete encasement 70 5 70 5 275 295 1.5 Equal (EA) and Unequal Angles (UA) (mm) EA 1 x 1 EA 1 x 1 EA 0 x 0 EA 2 x 2 UA 0 x 0 UA 0 x 1.2 21.6 26.6 23.0 27.3 33.8 36.0.1 48.5 59.9 71.1 82.0 89.9 93.5 97.1 4.0 117.8 8.0 23.0 27.3 33.7 32.0 39.6 47.1 Thickness (mm) 16 16 24 28 24 25 26 28 32 35 2. QUALITY 2.1 specification and quality extras EN025-2 EN025-2 S275JR* S275J0* S275J2* S355JR S355J0 S355J2 S355K2 30 80 80 * Available on referral. Verification of the specified impact value will not be carried out on JR grades (see impact testing page 6) 1. The basis price includes all mandatory quality extras associated with the specification 2. The quality extra includes marking to the standard. 3. Where customers require additional marking - price on application. 4. Where the customer specifies options within the standard, these will be subject to the manufacturer s acceptance, and price extras will be applied as appropriate. 5. British Steel offers ultrasonic testing of all sections, as described on page 6. 6. Any third party inspectorates and/or ultrasonic testing and/or through thickness testing price on application. EN025-4 EN025-4 S355M S355ML (up to 634) S4M (up to 634) S4ML (up to 634) S460M (up to 634) S460ML (up to 634) Previous specifications e.g. BS4360 may be supplied, subject to referral. * Subject to availability 4
2.2 Other qualities 2.21 Offshore EN225 EN225 Charpy v-notch temp S355G1 - C S355G4 - C S355G4+M - C S355G11 - C S355G11+M - C S355G - C S355G+M - C 2.21 Shipbuilding Shipbuilding Shipbuilding Lloyd s ABS Other Shipbuilding accreditation 3. QUANTITY Weight (applicable per order line item) 5 tonnes and over Under 5 tonnes to 2 tonnes Under 2 tonnes to 1 tonne Under 1 tonne to 0kg Under 0kg to 0kg Minimum order charge of 0 will apply. 4. LENGTH Standard length: 9,0mm, 11,000mm,,0mm, 14,000mm,,0mm, 16,0mm,,300mm 6,000mm -,300mm in 0mm increments >,300mm - 22,000mm in 0mm increments >22,000mm - 24,000mm in 0mm increments 0 >24,000mm Available Upon Request Standard length: 6,0mm, 9,0mm, 11,000mm,,0mm, 14,000mm,,0mm 6,000mm -,300mm in 0mm increments By arrangement By arrangement By arrangement 25 60 Customers should be aware that there are certain production conditions which may limit the availability of products over 24,000mm and individual orders should be discussed with British Steel. 4.1 Universal beams, columns and bearing piles 4.2 Parallel flange channels 4.3 Angles Standard length:,0mm 6,000mm -,300mm in 0mm increments 4.4 Asymmetric Beams ASB 5. FURTHER PROCESSING 5.1 Cutting 5.2 Mitre cuts 30 Further processing charges for cutting and mitre cuts are in addition to the length extras specified in tables 4.1, 4.2, 4.3 and 4.4. Weights 0-0-300 600+ Weights 0-0-300 600+ Single cut per cut 4. 5.85 7.35. 13.05.00 33.00 41.05 Single cut per cut 5.85 8.30. 14.95. 25. 46. 58.00 Additional cuts per cut 1.85 3.55 5.05 7.80 9.75 14.70 28.70 36.75 Additional cut charges applies only if there is no additional handling and/or machine setup. Standard Tolerance. 0/-2mm, squaring off charged as an additional cut. Minimum order charge of 45 will apply for processing; including cutting, mitre cuts and shotblast. Additional cuts per cut 6.75 9..00 17.25 21.30 29. 53. 66.95 Standard Tolerance 0/-2mm, squaring off charged as an additional cut. Minimum order charge of 45 will apply for processing; including cutting, mitre cuts and shotblast. 5.3 Shotblast & paint Weights 0-0-300 600+ Single cut per cut 5.85 8.30. 14.95. 25. 46. 58.00 Additional cuts per cut 6.75 9..00 17.25 21.30 29. 53. 66.95 Shot Blast and Primed to BS EN ISO 81-1:07 standard, Shotblast clean to SA 2.5. Paint spec Dr Dermuth Water Based Weldable Primer, -25 microns applied. 5
6. FINISHING/MARKING For specified applications, tighter tolerances of Universal Beams (UB), Columns (UC) and Bearing Piles (UBP) can be provided such that squareness is controlled to half tolerances to a minimum of 3mm and straightness is offered at half tolerances. 7.4 Impact testing Where customers exercise option 3 of EN 025-2 for impact testing, the request must be made at time of order placement Other impact testing 6.1 Straightness/Squareness Straightness Squareness 7. TESTING & INSPECTION Inspection authorities and associated administration charges, including Lloyd s Register and other shipping survey societies will be applied. 7.1 Inspection authorities fees third party inspection When surface inspection and/or inspection of section dimensional/shape tolerance and section identification marks is to be undertaken in the presence of the purchaser or his representative, this should not interfere with production and/or despatch. A charge will be applied in accordance with the scope of investigation required This is subject to acceptance by the manufacturing mill and customers are advised to specify this requirement at the time of enquiry and on any subsequently agreed order. 7.5 Test certificates Test certificates supplied in accordance with EN 4 Type 3.1 Test certificates supplied to other EN 4 Types 7.6 Test certificates Product analysis 7.7 Inspection test plan Where the customer requires sections manufacture to be in accordance with an agreed quality plan involving multiple inter-stage inspection, document reviews or other procedures, inspection charges will reflect the degree of inspection required by the quality plan and the number of inspection authorities involved. 7.2 Surface inspection British Steel sections comply with the normal surface condition requirements specified in the appropriate product standard and manufactured in accordance with the appropriate quality control procedures. Special requirements may be accommodated by agreement 7.3 Ultrasonic testing Testing to EN 306 and EU 6-7 can be offered* Ultrasonic testing of all sections is provided by British Steel Witnessing** 1. Any special requirements regarding limits on internal defects should be agreed at the time of the original order. 2. Tests not specified and agreed at the time of ordering will not be considered part of the contract. 3. *Edge testing as defined in BS 5996, is not available. 4. **Ultrasonic testing undertaken in the presence of the purchaser or outside inspection authority. 6
8 ADDITIONS 8.1 Cancellations Any cancellation will be subject to additional charges. Cancellations post rolling will not be accepted. 8.2 Carriage Rates Carriage rates will be applied accordingly, please contact your Account Manager. 8.3 Storage Costs If due to late call off by the customer material remains in stock for more than two weeks following date made available, a storage fee of 1./t per week will be applied. 8.4 Certificates Of Approval British Steel sections are fully compliant with the requirements of the Construction Products Directive (CPD 89/6/EEC). Our Declaration of Conformity and Notified Body Approval Certificates can be viewed on line at www.britishsteel.co.uk/who-we-are/approvalscertifications/ BRITISHSTEEL.CO.UK A PO Box 1, Brigg Road, Scunthorpe, North Lincolnshire, DN16 1BP T +44 (0)1724 E sections@longssteel.com SASPL:ENG:0416 Care has been taken to ensure that the contents of this publication are accurate, but Longs Steel UK Limited and its subsidiaries and associated undertakings (having the meaning set out in the Companies Act 06) do not accept responsibility or liability for errors or information that is found to be misleading. Copyright British Steel 16 7