CUBIC SCREW JACKS Features & Benefits Versatile Mounting - Unit can me mounted upright or inverted Clean surface - Easy to maintain in dirty environments Contemporary design for improved aesthetics Fast Delivery - Selected models are in stock German Engineering Specifications Capacities from 2.5 kn to 100 kn (1/4 Ton to 11 Ton) Speeds up to 1,800 RPM Operating Temperature: 32 F up to 122 F Trapezoidal Screw models are standard Translating screw (type 1) and rotating screw (type 2) models available in all capacities 6
Performance Table CUBIC SCREW JACKS Options Top plate, threaded end, male clevis and female clevis screw ends available. Ball Screw is optional. Bellows Boots. Hand wheel for manual operation. Shaft encoder. Trunnion mount. Electrical Limit Switch. Anti-rotation device (translating screw) using a square cover pipe and square screw end. Cubic Screw Jack Performance Table ing capacity kn (Tons) ing screw Thread (Trapezoidal) Worm Gear Ratio Standard (N) Worm Gear Ratio Optional (L) Travel Per Worm Turn Standard (N) mm (in) M0 M1 M2 M3 M4 M5 2.5 (0.28) 5 (0.56) 10 (1.12) 25 (2.81) (5.62) 100 (11.24) Tr14X4 Tr18X4 Tr20X4 Tr30X6 Tr40X7 Tr60X9 4:1 4:1 4:1 6:1 7:1 9:1 16:1 16:1 16:1 24:1 28:1 36:1 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) 1 (0.039) Travel Per Worm Turn Optional (L) mm (in) (.009) (.009) (.009) (.009) (.009) (.009) Worm Torque at Full load Standard (N) Nm (in-lbs) 1.2 (11) 2.7 (24) 5.7 (51) 14.7 (131) 31.8 (282) 83.8 (742) Worm Torque at Full load Optional (L) Nm (in-lbs) Efficiency Rating (%) Standard (N) Efficiency Rating (%) Optional (L) Maximum Power per Screw Jack kw (hp) 0.4 (3.6) 0.9 (8) 1.9 (17) 5.2 (47) 11.1 (99) 28.4 (252) 34 30 28 27 25 19 24 23 21 19 18 14 (.33) 0.42 (.56) 0.7 (0.93) 1.7 (2.25) 3.2 (4.28) 7.1 (9.51) Key Torque Nm (in-lbs) 3.2 (29) 7.5 (67) 16 (142) 60 (532) 153 (1,355) 437 (3,868) Maximum Input Shaft Torque Nm (in-lbs) 1.5 (14) 3.4 (31) 7.1 (63) 18 (160) 38 (337) 93 (824) Housing Weight kg (lbs) 0.6 (1.3) 1.2 (2.64) 2.1 (5) 6 (14) 17 (38) 32 (71) Screw and Pipe Weight Per 100mm Stroke kg (lbs) 0.1 (0.22) 0.35 (0.77) 0.45 (0.99) 0.7 (1.54) 1.2 (2.64) 2 (4.4) 7
CUBIC SCREW JACKS Part Number Table MO 1 M1A I 100 0 0 N Tr18x4 b (options contact factory ) Configuration Mounting Screw Closed Height Screw Length Drive Capacity Type Position End Type Stroke (Type 1) (Type 2) Ratio Screw Shaft M0 Type 1 M1A I mm mm mm Normal (N) Tr(DxP) b M1 Type 2 M1B II Low (L) Ku(DxP) (both sides) M2 M2A III M3 M2B IV M4 M3A GK M5 M3B M4A M4B M5A M5B M6A M6B Cubic Screw Jack Mounting Position Design A Design B 8
How to determine a Cubic Screw Jack part number Capacity...See the Cubic Screw Jack Performance table on page 7 Configuration Type...Type 1 - Translating screw. The screw moves through the housing of the screw jack Type 2 - Rotating screw. The screw is stationary and the traveling nut moves as the screw turns. Mounting Position...This determines the orientation that the screw jack will be installed. See the chart on page 8 for a diagram of positions. Screw End Type... Type II: Type III: Type IV: Type GK: End Plate Threaded End Clevis End Female Clevis End Stroke (mm)...specify the stoke length in millimeters. Stoke lengths are offered in centimeter increments (ie 100 mm, 110 mm or 120 mm). Closed Height (mm)...for translating screw (type 1) models. For type 2 models, value is zero Screw Length (mm)...for rotating screw (type 2) models. For type 1 models, value is zero Ratio...Input/output gear ratio. Screw Type...Refer to the Cubic Screw Jack performance table on page 7 for the trapezoidal screw that comes with each size. Ball screws are available upon request. Drive Shaft... b indicates both sides of the worm shaft extend out of the housing. Options for...sm/si: Limit Switches. (Translating Screw Type 1 only) V: Anti-turn device Vm/Vi: Anti-turn device with added stroke limit switches 9
CUBIC SCREW JACKS Dimensions Cubic Screw Jack Dimensions for Translating Screw Model (type 1) Size M0 M1 M2 M3 M4 M5 Tr Screw Tr 14x4 Tr 18x4 Tr 20x4 Tr 30x6 Tr 40x7 Tr 60x9 A/A* 25 (0.98) / 55 (2.16) 25 (0.98) / 55 (2.16) 35 (1.37) /65 (2.55) 40 (1.57) /75 (2.95) 45 (1.77) /100 (3.93) 55 (2.16) / 90 (3.54) B 77 (3.03) 97 (3.81) 120 (4.72) 132 (5.19) 182 (7.16) 255 (10.03) C 25 (0.98) 31 (1.22) 37.5 (1.47) 41 (1.61) 58.5 (2.30) 80 (3.14) D 60 (2.36) 80 (3.14) 100 (3.93) 130 (5.11) 180 (7.08) 200 (7.87) E 48 (1.88) 60 (2.36) 78 (3.07) 106 (4.17) 1 (5.90) 166 (6.53) F 72 (2.83) 85 (3.34) 105 (4.13) 145 (5.70) 165 (6.49) G 38 (1.49) 52 (2.04) 63 (2.48) 81 (3.18) 115 (4.52) 131 (5.15) H M6 M8 M8 M10 M12 M20 ø j k6 9 (0.35) 10 ( 14 (0.55) 16 (0.62) 20 (0.78) 25 (0.98) K1 20 (0.78) 25 (0.98) 32 (1.25) 45 (1.77) 63 (2.48) 71 (2.79) K2 16 (0.62) 21 (0.82) 29 (1.14) 42 (1.65) 63 (2.48) 66 (2.59) L 22 (0.86) 31 (1.22) 40 (1.57) 54 (2.12) 78 (3.07) 83 (3.26) L1 20 (0.78) 22.5 (0.88) 25.5 (1.00) 43 (1.69) 45 (1.77) 65 (2.55) L2 12 (0.47) 13 (0.51) 15 (0.59) 15 (0.59) 16 (0.62) 30 (1.18) N 92 (3.62) 120 (4.72) 140 (5.51) 195 (7.67) 240 (9.44) 300 (11.8) P 62 (2.44) 74 (2.91) 93 (3.66) 105 (4.13) 149 (5.86) 200 (7.87) Q 3x3x14(.11x.11x.55) 3x3x18(.11x.11x.70) 5x5x20(.19x.19x.78) 5x5x36(.19x.19x1.41) 6x6x36(.23x.23x1.41) 8x7x56(.31x.27x2.20) T 12 (0.47) 12 (0.47) 18 (0.70) 23 (.90) 32 (1.25) 40 (1.57) ø U 28 (1.10) 32 (1.25) 40 (1.57) 65 (2.55) 90 (3.54) ø W 26 (1.02) 30 (1.18) 38.7 (1.52) 46 (1.81) 60 (2.36) 85 (3.34) Y 62 (2.44) 75 (2.95) 82 (3.22) 117 (117) 160 (6.29) ø d 65 (2.55) Head II 80 (3.14) 90 (3.54) 110 (4.33) 1 (5.90) ø e 40 (1.57) 48 (1.88) 60 (2.36) 67 (2.63) 85 (3.34) 117 (117) ø f 4xø7 (.15xø.27) 4xø9 (.15xø.35) 4xø11 (.15xø.43) 4xø11 (.15xø.43) 4xø13 (.15xø.51) 4xø17 (.15xø.66) g 19 (0.74) 24 (0.94) 28 (1.10) 28 (1.10) 34 (1.33) 57 (2.24) s 16 (0.63) 20 (0.78) 21 (0.82) 23 (0.90) 30 (1.18) r 6 (0.23) 7 (0.27) 8 (0.31) 10 ( 15 (0.59) 20 (0.78) ø x 26 (1.02) 30 (1.18) 40 (1.57) 48 (1.88) 60 (2.36) 85 (3.34) h 12 (0.47) 19 (0.74) Head III 20 (0.78) 22 (0.86) 29 (1.14) 48 (1.88) i M8 M12 M14 M20 M30 M36 k 15 (0.59) 23 (0.90) 27 (1.06) 27 (1.06) 33 (1.29) 55 (2.16) Head IV lh10 12 (0.47) 15 (0.59) 20 (.78) 30 (1.18) 35 (1.37) 40 (1.57) m 40 (1.57) 55 (2.16) 63 (2.48) 78 (3.07) 105 (4.13) 147 (5.78) n 20 (0.78) 30 (1.18) 36 (1.41) 45 (1.77) 65 (2.55) 83 (3.26) ø o H8 10 ( 14 (0.55) 16 (0.62) 24 (0.94) 32 (1.25) 40 (1.57) p1 33 (1.29) 44 (1.73) 52 (2.04) 58 (2.28) 74 (2.91) 104 (4.09) ø u 25 (0.98) 30 (1.18) 40 (1.57) 45 (1.77) 60 (2.36) 85 (3.34) v 10 ( 15 (0.59) 18 (0.70) 25 (0.98) 35 (1.37) v1 30 (1.18) 40 (1.57) 45 (1.77) 53 (2.08) 70 (2.75) 97 (3.81) Head GK lh13 8 (0.31) 12 (0.47) 14 (0.55) 20 (0.78) 30 (1.18) 36 (1.41) m 42 (1.65) 62 (2.44) 72 (2.83) 105 (4.13) 160 (6.29) 188 (7.40) n 26 (1.02) 37 (1.45) 44 (1.73) 65 (2.55) 100 (3.93) 116 (4.56) ø o H9 8 (0.31) 12 (0.47) 14 (0.55) 20 (.78) 30 (1.18) 35 (1.37) p1 35 (1.37) 52 (2.04) 63 (2.48) 85 (3.34) 124 (4.88) 151 (5.94) u 16 (0.62) 24 (0.94) 27 (1.06) 40 (1.57) 60 (2.36) 70 (2.75) ø u1 14 (0.55) 20 (0.78) 24 (0.94) 34 (1.33) 52 (2.04) 60 (2.36) v 16 0(.62) 24 (0.94) 28 (1.10) 40 (1.57) 60 (2.36) 72 (2.83) v1 32 (1.25) 48 (1.88) 56 (2.20) 80 (3.14) 120 (4.72) 144 (5.66) 10
Dimensional Drawings Cubic Screw Jack Dimensions for Translating Screw Model (type 1) Head type GK Head type II Head type III Head type IV Lubrication Connection 11
CUBIC SCREW JACKS Accessories for Translating Screw Limit Switches (Sm/Si) Size A4 B B1 C (Sm/Si) D (Sm/Si) T M ø W2 X M0 105 (4.13) 84 (3.30) 95 (3.74) 44 (1.73) / 38 (1.49) 12 (0.47) / 24 (0.94) 28 (1.10) M1 105 (4.13) 86 (3.38) 97 (3.81) 44 (1.73) / 38 (1.49) 12 (0.47) / 24 (0.94) 32 (1.25) M2 110 (4.33) 90 (3.54) 100 (3.93) 44 (1.73) / 38 (1.49) 16 (0.62) / 28 (1.10) 40 (1.57) M3 115 (4.52) 94 (3.70) 104 (4.09) 49 (1.92) / 43 (1.69) 16 (0.62) / 28 (1.10) M4 135 (5.31) 101 (3.97) 111 (4.37) 58 (2.28) / 52 (2.04) 20 (0.78) / 32 (1.25) 65 (2.55) M5 140 (5.51) 114 (4.48) 123 (4.84) 66 (2.59) / 60 (2.36) 20 (0.78) / 32 (1.25) 90 (3.54) All Cubic Screw Jack sizes can be supplied with mechanical (Sm) or inductive (Si) limit switches. Anti-turn Device (V) Size A3 W4 M1 60 (2.36) 35x25 (1.37x0.98) M2 70 (2.75) 40x40 (1.57x1.57) M3 80 (3.14) x (1.96x1.96) M4 100 (3.93) 65x65 (2.55x2.55) M5 115 (4.52) 90x90 (3.54x3.54) This device prevents the screw from twisting to ensure correct linear movement. Anti-turn Device (Vm/Vi) Size A4 B B1 C (Vm/Vi) D (Vm/Vi) T M ø W4 X M1 105 (4.13) 86 (3.38) 96 (3.77) 44/38 (1.73/1.49) 12 (0.47) / 24 (0.94) 35x35 (1.37x1.37) M2 110 (4.33) 88 (3.46) 100 (3.93) 44/38 (1.73/1.49) 16 (0.62) / 28 (1.10) 40x40 (1.57x1.57) M3 115 (4.52) 93 (3.66) 105 (4.13) 49/43 (1.92/1.69) 16 (0.62) / 28 (1.10) x (1.96x1.96) M4 135 (5.31) 101 (3.97) 110 (4.33) 58/52 (2.28/2.04) 20 (0.78) / 32 (1.25) 65x65 (2.55x2.55) M5 145 (5.70) 113 (4.44) 125 (4.92) 66/60 (2.59/2.36) 20 (0.78) / 32 (1.25) 90x90 (3.54x3.54) All Cubic Screw Jack sizes can be supplied with mechanical (Vm) or inductive (Vi) limit 12 switches and an anti-turn device.
Applications HSE high performance worm gear screw jack, type 1, special configuration for an elevation movement from 32º F to 194ºF of an 36.4 Ft. m antenna Manufacturer s illustration: SBS Buhnentechnik GmbH Multi-screw lifting system (HSE high performance worm gear screw jacks) with safety device according to BGV C1 (VBG 70) for adjusting hall platforms in the culture Centre in Frankfurt/Oder. Synchronization is effected by means of bevel gear boxes and connecting shafts. Manufacturer s illustration: SBS Buhnentechnik GmbH Multi-screw lifting system for adjusting hall platforms in the Culture Centre in Frankfurt/Oder 13
CUBIC SCREW JACKS Dimensions Cubic Screw Jack Dimensions for Rotating Screw Model (type 2) Size M0 M1 M2 M3 M4 M5 Screw Tr 14x4 Tr 18x4 Tr 20x4 Tr 30x6 Tr 40x7 Tr60x9 C 25 (0.98) 31 (1.22) 37.5 (1.47) 41 (1.61) 58.5 (2.30) 81 (3.18) D 60 (2.36) 80 (3.14) 100 (3.93) 130 (5.11) 180 (7.06) 200 (7.87) E 48 (1.88) 60 (2.36) 78 (3.07) 106 (4.17) 1 (5.90) 166 (6.53) F 72 (2.83) 85 (3.34) 105 (4.13) 145 (5.70) 165 (6.49) G 38 (1.49) 52 (2.04) 63 (2.48) 81 (3.18) 115 (4.52) 131 (5.15) H M6 M8 M8 M10 M12 M20 ø j k6 9 (0.35) 10 ( 14 (0.55) 16 (0.62) 20 (0.78) 25 (0.98) K1 20 (0.78) 25 (0.98) 32 (1.25) 45 (1.77) 63 (2.48) 71 (2.79) K2 16 (0.62) 21 (0.82) 29 (1.14) 42 (1.65) 63 (2.48) 66 (2.59) L 22 (0.86) 31 (1.22) 40 (1.57) 54 (2.12) 78 (3.07) 83 (3.26) L1 20 (0.78) 22.5 (0.88) 25.5 (1.00) 43 (1.69) 45 (1.77) 65 (2.55) L2 12 (0.47) 13 (0.51) 15 (0.59) 15 (0.59) 16 (0.62) 30 (1.18) N 92 (3.62) 120 (4.72) 140 (5.51) 195 (7.67) 240 (9.44) 300 (11.81) NL stroke + 52 (2.04) stroke + 56 (2.20) stroke + 70 (2.75) stroke + 85 (3.34) stroke + 110 (4.33) stroke + 125 (4.92) P 62 (2.44) 74 (2.91) 93 (3.66) 105 (4.13) 149 (5.86) 200 (7.87) Q 3x3x14 (.11x.11x.55) 3x3x18 (.11x.11x.70) 5x5x20 (.19x.19x.78) 5x5x36 (.19x.19x1.41) 6x6x36 (.23x.23x1.41) T 12 (0.47) 12 (0.47) 18 (0.70) 23 (0.90) 32 (1.25) 40 (1.57) T1 (1) 12 (0.47) 12 (0.47) 18 (0.70) 23 (0.90) 32 (1.25) 40 (1.57) ø W 26 (1.02) 30 (1.18) 36.1 (1.42) 46 (1.81) 60 (2.36) 85 (3.34) ø W(1) 26 (1.02) 30 (1.18) 38.7 (1.52) 46 (1.81) 60 (2.36) 85 (3.34) Safety X 10 ( 12 (0.47) 15 (0.59) 20 (0.78) 25 (0.98) 25 (0.98) Y 62 (2.44) 75 (2.95) 82 (3.22) 117 (4.60) 160 (6.29) a 32 (1.25) 32 (1.25) ing Nut 40 (1.57) 45 (1.77) 60 (2.36) 75 (2.95) b 10 ( 10 ( 12 (0.47) 15 (0.59) 18 (0.70) 25 (0.98) ø c h9 40 (1.57) 40 (1.57) 45 (1.77) 70 (2.75) 90 (3.54) ø d 65 (2.55) 80 (3.14) 87 (3.42) 110 (4.33) Journal End ø i j6 8 (0.31) 12 (0.47) 15 (0.59) 20 (0.78) 25 (.98) 40 (1.57) h 12 (0.47) 15 (0.59) 20 (0.78) 25 (0.98) 30 (1.18) 45 (1.77) 8x7x56 14
Dimensional Drawings Cubic Screw Jack Dimensions for Rotating Screw Model (type 2) Head type I Lubrication Connection 15
CUBIC SCREW JACKS Accessories for Rotating Screw Model Short Safety Nut The short safety nut supports the load if the main nut breaks. This considerably increases the operating safety of the drive elements. The safety nut can also be used to precisely check for wear on the main nut, as the clearance between the two nuts changes according to the amount of wear. In the case of worm gear screw jacks with short safety nut, the direction of main stress (tension and compression force) and the mounting position should be taken into account, as only a correctly fitted safety nut is capable of taking up the load. mm (in) Size NL a1) b øc* M0 Contact Factory M1 M2 stroke + 95 (3.74) 5 25 (0.98) 45 (1.77) M3 stroke + 120 (4.72) 5 35 (1.37) M4 stroke + 1 (5.90) 5 40 (1.57) 70 (2.75) M5 stroke + 185 (7.28) 5 60 (2.36) 90 (3.54) Compression Tension Long Safety Nut Worm gear screw jacks used on theatre stages (BGV C1, former VBG 70), lifting platforms (VBG 14) or lifting systems that might affect personal safety are designed according to current regulations, and include such items as anti-drop systems (self-locking screws and/or mechanical safety brakes as part of the drive system). mm (in) Compression Size NL a1) b øc* M0 Contact Factory M1 M2 stroke + 115 (4.52) 5 45 (1.77) 45 (1.77) M3 stroke + 140 (5.51) 5 55 (2.16) 55 (2.16) M4 stroke + 180 (7.08) 5 70 (2.75) 70 (2.75) M5 stroke + 210 (8.26) 5 85 (3.34) 90 (3.54) Tension LWZ Traveling Nut with Trunnion Size a b c ød øe f M1 45 (1.77) 22.5 (0.88) 35 (1.37) 14 (0.55) 7.5 (0.29) M2 25 (0.98) 40 (1.57) 60 (2.36) 18 (0.70) 10 ( M3 60 (2.36) 30 (1.18) 80 (3.14) 25 (0.98) 15 (0.59) M4 70 (2.75) 35 (1.37) 62 (2.44) 95 (3.74) 35 (1.37) 16.5 (0.64) M5 120 (4.72) 60 (2.36) 80 (3.14) 130 (5.11) 25 (0.98) All personal safety applications must be approved by Duff-Norton in writing 16
Actuator Model Actuator Ratio M1 4:1 M2 4:1 M3 M4 M5 6:1 7:1 9:1 Reducer Model SK072 SK072 SK072 SK172 SK072 SK172 SK372 SK372 Reducer-Horsepower Tables ing ing Capacity, kn (2000 lb tons) - See Notes Below. All data for 60Hz input power. Reducer Speed Motor Horsepower[60Hz] / Frame Size Ratio (mm/sec) 1/6 - IEC63 1/4 - IEC63 1/3 - IEC71 1/2 - IEC71 3/4 - IEC80 1 - IEC80 1.5 - IEC90 2 - IEC90 2.10 13.69 2.7 (.30) 4.2 (.47) 5.4 (.61) 7.9 (.89) 3.28 8.77 4 (.45) 6.5 (.73) 8.4 (.95) 12.5 (1.40) 4.77 6.03 5.8 (.65) 9.4 (1.05) 12.1 (1.36) 7.23 3.98 9 (1.01) 14.2 (1.59) 10.00 2.88 12.3 (1.38) 15.77 1.82 19.6 (2.20) 24.75 1.16 30.7 (3.45) 36.43 0.79 45.2 (5.00) 2.10 13.69 2.4 (.27) 3.9 (.44) 5.1 (.57) 7.5 (.84) 3.28 8.77 3.8 (.43) 6.1 (.68) 7.9 (.89) 11.9 (1.34) 4.77 6.03 5.5 (.62) 8.9 (1.00) 11.5 (1.29) 17.2 (1.93) 7.23 3.98 8.5 (.91) 13.5 (1.52) 17.4 (2.96) 26.1 (2.93) 10.00 2.88 11.7 (1.32) 18.6 (2.09) 24.2 (2.72) 15.77 1.82 18.6 (2.09) 29.3 (3.29) 24.75 1.16 29.1 (3.27) 36.43 0.79 42.8 (4.81) 2.10 13.69 3.8 (.43) 5 (.56) 7.3 (.82) 3.28 8.77 3.6 (.40) 5.9 (.66) 7.7 (.86) 11.5 (1.29) 4.77 6.03 5.3 (.59) 8.6 (.96) 11.1 (1.24) 16.7 (1.87) 7.23 3.98 8.2 (.92) 13 (1.46) 16.9 (1.89) 25.4 (2.85) 10.00 2.88 11.3 (1.26) 18 (2.02) 23.4 (2.62) 35.1 (3.93) 15.77 1.82 18.0 (2.02) 28.4 (3.18) 36.9 (4.13) 55.5 (6.22) 24.75 1.16 28.2 (3.16) 44.6 (5.00) 57.8 (6.47) 36.43 0.79 41.5 (4.65) 65.7 (7.36) 2.32 12.39 12.3 (1.38) 17.1 (1.92) 25.4 (2.85) 33.8 3.46 8.31 18.4 (2.06) 25.4 (2.85) 37.8 (4.23).5 5.14 5.59 27.3 (3.06) 37.7 (4.22) 56.3 (6.31) 7.83 3.67 41.5 (4.65) 57.5 (6.44) 12.06 2.38 64.0 (7.17) 2.10 13.69 6.7 (.75) 3.28 8.77 5.5 (.62) 7.1 (.80) 10.6 (1.19) 4.77 6.03 5.0 (.56) 8.0 (.90) 10.3 (1.15) 15.4 (1.72) 7.23 3.98 7.6 (.85) 12.0 (1.34) 15.6 (1.75) 23.4 (2.62) 10.00 2.88 10.5 (1.18) 16.7 (1.87) 21.6 (2.42) 32.5 (3.64) 15.77 1.82 16.7 (1.87) 26.3 (2.95) 34.1 (3.82) 51.3 (5.75) 24.75 1.16 26.1 (2.92) 41.2 (4.61) 53.5 (6.00) 80.6 (9.03) 36.43 0.79 38.3 (4.29) 60.7 (6.80) 78.7 (8.81) 2.32 12.39 11.3 (1.27) 15.8 (1.77) 23.4 (2.62) 31.2 (3.49) 3.46 8.31 17 (1.90) 23.4 (2.62) 35 (3.92) 46.7 (5.23) 5.14 5.59 25.2 (2.82) 34.8 (3.90) 52 (5.82) 69.3 (7.76) 7.83 3.67 38.4 (4.30) 53.1 (5.95) 79.2 (8.87) 105 (11.8) 12.06 2.38 59.1 (6.62) 81.8 (9.16) 18.60 1.55 91.3 (10.2) 126 (14.1) 27.62 1.04 136 (15.2) 1/3 - IEC71 1/2 - IEC71 3/4 - IEC80 1 - IEC80 1.5 - IEC90 2 - IEC90 3 -IEC100 5 - IEC100 2.62 10.97 51.7 (5.79) 85 (9.52) 3.12 9.21 61.4 (6.88) 101 (11.3) 5.24 5.49 103 (11.5) 2.62 10.97 26.8 (3.00) 39.2 (4.39) 64.6 (7.24) 3.78 7.61 38.7 (4.33) 56.5 (6.33) 93.2 (10.4) 5.24 5.49 40.2 (4.) 53.7 (6.01) 78.4 (8.78) 129 (14.5) 7.23 3.98 37.2 (4.17) 55.6 (6.23) 74.0 (8.29) 108 (12.1) 178 (20.0) 10.28 2.80 53.0 (5.94) 79.1 (8.86) 105 (11.8) 153 (17.2) 253 (28.4) 14.57 1.97 36.0 (4.03) 54.3 (6.08) 75.1 (8.41) 112 (12.5) 149 (16.7) 20.62 1.39 N.A. 76.9 (8.61) 106 (11.9) 158 (17.7) 211 (23.7) 30.11 0.95 49.4 (5.53) 74.4 (8.33) 112 (12.5) 155 (17.4) 231 (25.9) 43.26 0.66 70.9 (7.94) 107 (12.0) 161 (18.1) 223 (25.0) SK672 Ratios from 2.66:1 to 362.43:1 available, with motors to 10HP maximum. Contact Duff-Norton Engineering. 1. Listed actuator capacities consider reducer efficiencies and maximum power ratings. 2. Capacities are based on available reducer output torque and apply to both single actuator and shaft-connected, multiple actuator configurations. Capacity is the total load for all actuators driven by the reducer. 3. Capacities in shaded area exceed the single actuator load rating or horsepower rating. In no case should any actuator be loaded beyond its nominal load rating, or at input powers greater than shown in the actuator specification chart on page 7. 4. The ratios shown are only a sampling of those available. All gear reducers shown are available with ratios intermediate to those shown and greater than the largest shown. 17