Designed by Yizumi March 2018 5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways YIZUMI-HPM orporation 3424 State Route 309,Iberia, Ohio 43325 TEL: 740-382-5600 Email: sales@yizumi-hpm.com www.yizumi-hpm.com
bout Yizumi-HPM orporation Yizumi-HPM orporation Yizumi Headquarters Mission & Vision Our mission is to use the HPM technology developed over 135 years combed with modern control technology to R&D and manufacture the best performance and competitive priced maches to satisfy our customer needs. Our vision is to become the No.1 choice for our customers the world. Yizumi-HPM Team Yizumi Shunde(Wusha)Production ase Yizumi Suzhou(Wujiang)Production ase Yizumi-HPM orporation is a manufacturer of high quality hybrid jection moldg machery from 60 to 0 tons, and hot and cold chamber die castg machery from to 4500 tons. HPM has been supplyg jection moldg machery and support services to the plastic dustry sce 1931, and has thousands of jection moldg and die castg maches operation throughout North merica. HPM ompany was corporated 1877 as the Hydraulic Press Manufacturg ompany Mount Gilead, Ohio, with the purpose to design and build hydraulic presses for the extraction of apple cider. Through the sales efforts of its founders, the company marketed its products to most fruit-growg areas the United States and anada, gag credibility primarily through word-of-mouth advertisg. HPM started to manufacture hydraulic presses that were used a number of markets, cludg textiles, railroads, and food processg. In March of 2011, Guangdong Yizumi Precision Machery o., Ltd, located ha, acquired all HPM tellectual properties. Shortly after the purchase, HPM North merica orporation was set up Marion, Ohio. In 2017 HPM North merica changed its name to Yizumi-HPM orporation to be representative of the formidable ternational company that we are a part of today. Yizumi-HPM orporation sells and manufactures jection moldg maches and die castg maches based upon the HPM designs but utilizg the engeerg, manufacturg and fancial strengths of YIZUMI. It is not only the service and technical center of YIZUMI North merica; it s also a very important step of the globalization strategy of the company. I hope with further global operation of HPM and YIZUMI brands, we can provide our customers worldwide with our best products and services, Richard Yan, EO of Yizumi. 01 02
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways 5-N Series High-end Servo Injection Moldg Mache lampg force: 65-1125 US Tons To fulfill the core value of reliability & stability 5-N series medium-large maches, we redefe and strictly implement key spection and performance criteria below: ackflow detection variation <1 ore ustomer Value Reliability & Stability Plasticizg weight deviation<0.5% Platen parallelism (after load) <0.18(UN05-N) Platen parallelism (mold openg to )<0.54(UN05-N) Force deviation of tie bar <±3% Repeatability of clampg force <1% ccuracy of mold-open end position <2 Data above are Q standards factory 03 04
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways Highly rigid clampg unit Less platen deformation, better parallelism, less deviation of stress on tie bars, more precise repeatability of clampg force. pplicable to high-speed & high-pressure jection moldg requirement, effectively improvg precision of molded parts. Uniform-stress clampg technology Uniform distribution of clampg force, less platen deformation. Lower clampg force is applicable to produce the same part without flash, protectg platen and mould. Extended movg platen support The movable platen is equipped with front heavy-load slidg supports. The center of gravity of support moves forwards to the mold mountg surface, preventg the platen from tiltg. Mache still operates steadily when it is loaded with heavy molds. Extended ejector guidg platen design lampg unit Mechanical structure of clampg unit stable, high-rigidity Ejector guidg extended, effectively avoidg ejector plate tiltg and improvg stability of ejection. Uniform distribution of ejector force, precise ejection position with better ejection performance. The platen structure is designed with European style and fully optimized parameters and force distribution. High-rigidity materials and manufacturg processes for base frame ensure the mache is strong, stable and reliable. 05 06
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways Integrated lear guide rail support Mache adopt tegrated lear guide rail, horizontal double-carriage design and double-cylder jection to ensure jection is reliable & stable. Integrated lear guide rail support reduces the friction between jection unit and lear guide rail or tie bar and enhances production repeatability. Three beargs for 25-N and larger models deep-groove ball bearg is added to the front of transmission shaft, close to the screw, to improve the support of transmission shaft, reduce vibration when it rotates and prolong the service life of thrust bearg. Proportional back pressure for plasticizg Proportional back pressure facilitates accurate control by dustrial computer and enhances the stability of jection. Injection Unit Mechanical structure of jection unit stable, less friction Low friction oil seal side jection cylder Injection cylder adopts low friction oil seal design, fully reducg jection friction and ensurg longer service life. Optimized jection structure design improves rigidity of jection unit. Reduce all frictional resistance durg jection moldg process enhance the stability & precision of jection. 07 08
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways Hydraulic System Yizumi third generation of energy savg servo technology durable, highly efficient, energy-savg & low noise ontrol System High precision control system more accurate control of system pressure, flow, position & temperature, higher part repeatability, as well as more stable overall mache performance. Yizumi s third-generation energy-savg servo technology So far, Yizumi has comprehensively grasped the application technology of energy-savg servo system sce it was further studied 5. The third-generation servo system has been improved and optimized the ternal structure of motor, the standard of magnetic steel, the selection of oil pump and the development of drive software to achieve superior performance stability, reliability, durability, energy conservation, efficiency and low noise; the servo system uses 30%-80% less energy than conventional hydraulic maches. Low oil level alarm utomatic low oil level alarm function prevents gas from beg sucked due to low oil level, avoidg consequent stability of hydraulic circuit. The third-generation servo system olor mixg signal with EUROMP-based terface EUROMP 67 based programs and plugs for robot Professional brand-name motor Imported high-pressure gear pump INOVNE servo drive Proven by years of practical application and higher configured, the third-generation servo system is stable, reliable and durable and characterized by high efficiency, energy savg, low noise, strong power and fast response. Professional control system Low noise Under the same workg conditions, the third-generation servo system emits 20% lower noise than the previous generation when producg the same product. Fast response High efficiency gear pump realizes fast response jection moldg which can be used high-precision moldg. High performance Special high-torque servo motor and high pressure gear pump greatly improve the low speed moldg and contuous pressure-holdg performance with excellent repeatability. 5-N series employs ustria's KE control system with user-friendly terface and higher processg speed. 12''TFT color touch screen, visualized graphic parameter settg, actual parameter values recorded and displayed with curves, more accurate onle process analysis Free prograg is available to meet the needs of special molds and processes. Extensible I/O modules can tegrate with more functions, cludg temperature control and sequence valve as needed. 09 10
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways UN655-N to UN11255-N Specifications DESRIPTION UN655-N UN5-N 1355-N 1805-N Note: International specification UNIT 1/600 295/0 420/1 INJETION UNIT 604/1600 1.Shot volume= cross-sectional area of barrel jection stroke 2.Shot weight= shot volume 0.92 (GPPS) Shot volume Shot weight (PS) Screw diameter cu cm 3 g oz 3.125 51.2 47 1.6 0.866 4.37 71.6 65.9 2.3 1.024 26 7.116 116.6 107 3.8 1.181 30 9.3 159 146 5.2 1.378 35 12.633 207 1.4 6.7 1.575 40 9.984 163.6.5 5.3 1.378 35 15.062 246.8 7.1 8 1.693 43 18.772 307.6 283 10 1.89 48 18.168 297.7 273.9 9.7 1.693 43.635 3.9 341.2 12 1.89 48 27.603 452.3 416.1 14.7 2.087 53 3.We reserve the right to improve products or change specifications without prior notice. The product photos this catalogue are for reference only. 4.Please form us if you need to process engeerg plastics like Injection pressure psi Mpa 54099 373 38725 267 36666 252.8 26919 185.6 20624 142.2 37260 256.9 24656 1 19827 136.7 29443 203 23627 162.9 19377 133.6 PV, P and PMM or have special requirements. Injection rate oz/sec g/sec 1.6 45.2 2.2 63.2 2.9 83.5 4 113.7 5.2 148.5 3.5 99 5.3 149 6.6 186 5.5 156 6.8 194 8.4 237 Screw L:D ratio 24:1 24:1.3:1 Max. jection speed /sec /sec 5.16 131 5.12 130 4.41 112 4.61 117 Screw stroke 5.31 135 6.5 165 6.69 1 8.07 205 Screw speed(stepless) r/m 0-256 0-266 0-271 0-296 LMPING UNIT lampg force US tons kn 65 600 0 135 1 180 1600 Openg stroke 10.24 260 12.99 330 14.17 360 16.54 420 Space between tie bars(h V) x x 12.2 x 12.2 310 x 310 14.17 x 14.17 360 x 360 16.14 x 16.14 410 x 410 18.11 x 18.11 460 x 460 Mold thickness (M.-Max.) 4.72-12.99 120-330 5.12-14.96 130-380 5.71-17.72 145-450 6.30-20.47 160-520 Ejector stroke 2.36 60 3.94 4.72 120 5.51 Ejector force us tons kn 2.5 3.1 28 4.7 42 POWER UNIT 4.7 42 Hydraulic system pressure psi Mpa Pump motor power hp kw 18.8 14 16.4 23.6 17.6 38.5 28.7 Heater power hp kw 6.4/7.4 4.8/5.5 9.3/10.5 6.9/7.8 12.1/13.5 9/10.1 14.6/16.2 10.9/12.1 Number of temp control zones 5 5 5 5 GENERL Dry cycle time sec 1.6 1.8 2 2.4 Oil tank capacity gal L 38 145 44 165 51 195 69 260 Mache dimensions(l W H) m x m x m 168.5 53.1 72.4 4.28 1.35 1.84 178.3 53.1 74.0 4.53 1.35 1.88 185.8 55.9 75.6 4.72 1.42 1.92 205.9 58.3 769.5 5.23 1.48 2.02 Design weight lbm kg 6380 20 7480 3400 8800 4000 10 5000 11 12
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways UN655-N to UN11255-N Specifications DESRIPTION UN55-N UN25-N UN3605-N UN4505-N Note: International specification UNIT 895/0 1269/2600 1885/3 INJETION UNIT 2693/4000 1.Shot volume= cross-sectional area of barrel jection stroke 2.Shot weight= shot volume 0.92 (GPPS) Shot volume Shot weight (PS) Screw diameter cu cm 3 g oz 25.949 425.2 391.2 13.8 1.89 48 31.637 518.4 476.9 16.8 2.087 53 40.5 664 610.9 21.5 2.362 60 35.677 584.6 537.8 19 2.087 53 45.728 749.3 689.4 24.3 2.362 60 58.733 962.4 885.4 31.2 2.677 68 50.897 834 767.3 27.1 2.362 60 65.379 1071.3 985.6 34.8 2.677 68 81.667 1338.2 1231.1 43.4 2.992 76 73.136 1198.4 1102.5 38.9 2.677 68 91.358 1497 1377.2 48.6 2.992 76 111.607 1828.8 1682.5 59.3 3.307 84 3.We reserve the right to improve products or change specifications without prior notice. The product photos this catalogue are for reference only. 4.Please form us if you need to process engeerg plastics like Injection pressure psi Mpa 30559.7 63 172.8 19551 134.8 31488 217.1 24569 169.4 19116 131.8 38 6.2 25541 176.1 20450 141 32604 4.8 26092 179.9 21364 147.3 PV, P and PMM or have special requirements. Injection rate oz/sec g/sec 6.8 193 8.3 235.3 10.6 301 9.3 263.7 11.9 337.9 15.3 434.1 11.9 338 15.3 434.1 19.1 542.3 13 367.3 16.2 458.8 19.8 560.5 Screw L:D ratio :1.6:1.6:1.3:1 Max. jection speed /sec /sec 4.57 116 5.12 130 5.12 130 4.33 110 Screw stroke 9.25 235 10.43 265 11.61 295 12.99 330 Screw speed(stepless) r/m 0-254 0-266 0-287 0-193 LMPING UNIT lampg force US tons kn 5 0 2 2600 360 3 450 4000 Openg stroke 19.29 4 20.87 530 25.2 640 27.56 0 Space between tie bars(h V) x x 20.87 x 20.87 530 x 530 24.02 x.44 610 x 5 27.95 x 26.38 710 x 6 29.92 x 27.95 760 x 710 Mold thickness (M.-Max.) 7.09-21.65 180-550 7.68-24.02 195-610 8.66-25.98 0-660 9.45-28.74 240-730 Ejector stroke 5.91 6.3 160 6.69 1 8.27 Ejector force us tons kn 5.5 49 8.7 77 8.7 77 12.4 110 POWER UNIT Hydraulic system pressure psi Mpa Pump motor power hp kw 48.3 36 38.35 + 23.6 28.6 + 17.6 52.8 + 23.6 39.4 + 17.6 52.8 + 30.8 39.4 + 23 Heater power hp kw 19.3/.5 14.4/16.8.3/25.5 16.6/19 29.8/33.2/24.6 35.4/41.4 26.4/30.9 Number of temp control zones 6 6 6 7 GENERL Dry cycle time sec 2.7 2.8 3.2 4 Oil tank capacity gal L 86 325 115 435 117 445 5 Mache dimensions(l W H) m x m x m 3.6 65.4 82.3 5.68 1.66 2.09 254.7 73.6 94.1 6.47 1.87 2.39 274.8 73.6 98.4 6.98 1.87 2.50 311.8 85.8 96.5 7.92 2.18 2.45 Design weight lbm kg 13 6000 180 8500 24640 11 35 16000 13 14
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways UN655-N to UN11255-N Specifications DESRIPTION UN5405-N UN6305-N UN7305-N UN05-N UN11255-N Note: International specification UNIT 3330/4800 3330/5600 4820/6500 6780/8000 INJETION UNIT 15/00 1.Shot volume= cross-sectional area of barrel jection stroke 2.Shot weight= shot volume 0.92 (GPPS) Shot volume Shot weight (PS) Screw diameter cu cm 3 g oz 102.435 1678.5 1544.2 54.5 2.992 76 125.137 2050.5 1886.5 66.5 3.307 84.104 2459.6 62.8 79.8 3.6 92 102.435 1678.5 1544.2 54.5 2.992 76 125.137 2050.5 1886.5 66.5 3.307 84 177.285 25 2673 94.4 3.937 135.28 16.7 2039.4 71.9 3.307 84 162.273 2659 2446.3 86.3 3.6 92 3.606 3664 3371 119.1 4.252 108 194.678 31 2934.8 103.7 3.6 92 230.074 37 3468 1.5 3.937 309.41 50 4664 164.8 4.567 116 263.627 4319.8 3974.2 139.9 3.937 307.543 5039.4 4636.2 163.2 4.252 108 411.815 6748 6208 219 4.921 125 3.We reserve the right to improve products or change specifications without prior notice. The product photos this catalogue are for reference only. 4.Please form us if you need to process engeerg plastics like Injection pressure psi Mpa 28804 198.6 23569 162.5 19653 135.5 28804 198.6 23569 162.5 16621 114.6 31560 217.6 26310 181.4 100 131 30864 212.8 26136 180.2 19421 133.9 30284 208.8 25976 179.1 19377 133.6 PV, P and PMM or have special requirements. Injection rate oz/sec g/sec 16.8 475.5 20.5 580.9 24.6 696.8 16.8 475.5 20.5 580.9 29 823.3 18.7 529.9.4 635.7 30.9 876 21.1 598.4 24.9 7 33.6 951.3 25.2 714.9 29.4 833.9 39.4 1117.1 Screw L:D ratio.1:1.1:1 21.9:1 21.7:1 21.6:1 Max. jection speed /sec /sec 4.49 114 4.49 114 4.09 104 3.85 97.9 3. 99 Screw stroke 14.57 3 14.57 3 15.75 400 18.9 480 21.65 550 Screw speed(stepless) r/m 0-176 0-176 0-172 0-0 - 130 LMPING UNIT lampg force US tons kn 540 4800 630 5600 731 6500 0 8000 1125 00 Openg stroke 30.71 780 33.46 850 35.43 0 40.94 1040 48.03 10 Space between tie bars(h V) x x 32.68 x 31.89 830 x 810 33.46 x 31.89 850 x 810 36.61 x 36.61 930 x 930 39.37 x 39.37 0 x 0 45.67 x 45.67 1160 x 1160 Mold thickness (M.-Max.) 10.24-31.89 260-810 12.99-33.46 330-850 13.78-35.43-0 15.75-39.37 400-0 17.72-45.67 450-1160 Ejector stroke 8.66 0 8.66 0 11.02 11.02 12.6 320 Ejector force us tons kn 12.4 110 18.7 166 20.5 182 20.5 182 POWER UNIT 30.8 274 Hydraulic system pressure psi Mpa Pump motor power hp kw 74.6 + 30.8 55.4 + 23 74.6 + 30.8 55.4 + 23 80.5 + 48.3 60 + 36 80.5 + 52.8 60 + 39.4 80.5 x 2 60 x 2 Heater power hp kw 44.4/48.5 33.1/36.2 44.4/57.7 33.1/43 50.9/63 38/47 56.3/68.4 42/51 62.4/85.3 46.5/63.6 Number of temp control zones 7 7 7 7 7 GENERL Dry cycle time sec 4.5 5.5 6.5 7 8 Oil tank capacity gal L 201 760 201 760 264 0 304 1 343 1300 Mache dimensions(l W H) m x m x m 333.5 87.8 98 8.46 2.23 2.49 343.7 87.8 98 8.73 2.23 2.49 378.3.9 102.8 9.61x2.31x2.61 415.4 93.7 103.5 10.55x2.38x2.63 449.2 102.4 104.7 11.41x2.60x2.66 Design weight lbm kg 40260 18300 41800 100 56 25500 700 00 96800 44000 15 16
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways Platen Dimensions & Layout Mache Dimensions UN655-N 175 110 75 40 175 110 75 40 Ø -T-slot 14 11 23 23 310 4 Ø125 Ø Ø2 SR10 35 10 240 50 35 8-M12 24 UN655-N 1810 1560 1129 2016 3769 567 538 240 1334 75 1851 48-M16 32 310 4 260 120-330 837 540 3423 4276 600 1 240 1 14 -T-slot 11 23 23 50 275 35 71 4 605 555 275 UN5-N 240 1 Ø 4-Ø30 360 560 Ø125 Ø Ø3 SR10 10 8-M12 24 UN5-N 1895 1640 1169 1414 75 1936 44-M16 32 Ø 360 560 330 130-380 960 652 3658 4531 675 1 -T-slot UN1355-N 240 1 Ø 44-M16 32 Ø 240 1 14 11 23 4-Ø30 23 410 623 360 Ø125 Ø Ø3 35 10 SR10 145-450 275 8-M16 24 UN1355-N 1960 1710 1204 2461 1484 1135 645 3943 4724 4560 640 5 275 75 1966 745 1420 410 623 -T-slot UN1805-N 2 0 1 125 Ø 44-M16 32 4-Ø30 2 0 1 125 18 12 30 Ø 30 460 6 420 Ø125 Ø Ø3 295 50 8-M16 24 10 SR10 160-520 175 UN1805-N 2045 1795 1299 2769 5212 1609 1235 785 4453 5231 295 2065 693 633 805 1482 460 6 17 18
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways Platen Dimensions & Layout Mache Dimensions UN55-N 310 1 8-Ø30 44-M20 40 310 1 Ø -T-slot 16 38 37 530 7 Ø160 Ø SR10 50 Ø3.5 10 4 180-550 295 8-M16 32 175 UN55-N 2120 18 1358 2944 18 12 835 4798 5804 5529 733 672 295 2138 885 1659 530 7 -T-slot 3 320 180 16 38 37 35 8-M20 40 3258 6239 795 772 UN25-N 320 80 52-M20 40 Ø 5 825 Ø160 Ø Ø3.5 SR10 10 530 195-610 UN25-N 87 2037 1425 1800 1475 850 5208 6468 2414 935 1883 610 865 -T-slot 3 320 180 16 38 37 40 8-M20 40 3610 6910 873 850 UN3605-N 3 320 80 64-M20 40 Ø 6 950 Ø Ø Ø3.5 12 SR10 640 0-660 UN3605-N 23 2 1520 1955 1620 985 5750 6980 2529 1060 1875 710 9 UN4505-N 400 300 4 400 300 Ø -T-slot 16 38 37 710 1030 Ø Ø Ø4 SR15 65 12 371 8-M20 40 UN4505-N 77 2082 1432 3915 7730 6233 79 371 2450 1032 937 5 2118 2182 60-M24 50 760 1080 0 240-730 19 20
5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways Platen Dimensions & Layout Mache Dimensions 500 400 300 4-Ø45 68-M24 深 50 500 400 300 830 1165 - T-slot 16 38 Ø120 37 810 1145 UN5405-N Ø4 65 12 R15S 780 260-810 461 8-M20 深 40 500 400 300 4-Ø55 68-M24 深 50 500 400 300 37 16 38 Ø 810 11 850 1 - T-slot UN6305-N 65 Ø Ø4 20 SR15 880 330-850 461 8-M20 深 40 2308 20 1458 42 1993 8464 66 8460 UN5405-N 461 2493 1072 977 1 2168 32 UN6305-N 600 - T-slot 475 315 28 20 48 46 500 115 8-M20 深 40 UN7305-N 600 475 315 Ø120 930 1320 Ø Ø6 20 420 UN7305-N 8-Ø55 SR20 48-M24 深 50 0-0 930 1320 6 545 420 28 46 315 20 48 - T-slot 110 555 12-M24 深 48 UN05-N 6 545 420 315 Ø120 0 1435 Ø127 Ø6 20 420 UN05-N 8-Ø55 SR20 68-M24 深 50 1040 400-0 0 1435 0 560 - T-slot 420 UN11255-N 0 560 420 Ø120 28 20 48 46 1160 1620 Ø127 Ø6 110 20 600 12-M24 深 48 420 UN11255-N 8-Ø55 SR20 68-M24 深 50 10 450-1160 1160 1620 21
UN655-N to UN6305-N Features Standard Optional Standard Optional lampg Unit ll transducers, weak-current switches and reversg solenoid valves covered with water-proof and rat-bite-proof corrugated pipes Precision transducer for clampg / ejector/jection stroke control Multi-level password security lampg platens / toggles made of highly-rigid ductile iron QT500-7 Front and rear safety gates with emergency stop protection Hydraulic gear-type mold height adjustg device PDP terface Mechanical /electrical/ hydraulic safety devices Statistical process control (SP) terface djustment-free mechanical safety rod Reserved terfaces for air blowg, core pull, ejector back protection devices, etc. Wear-resistant manganese steel bands and supportg tracks for movable platen Hot runner terface utomatic central lubrication system Pneumatic sequence valve Multiple functions of ejector available Interface for electric unscrewg device Low pressure mold protection ir blowg device with valve Platen with T-slots and mold mountg holes ir-assisted jection device One-button automatic mold height adjustment entral (networked) monitorg system utomatic clampg force adjustment as needed Protective light grid of front and rear safety gates Forced ejector reset Display of mache s energy consumption Safety edges for mache gates Special power supply voltage Special mold mountg holes Sequential jection valve gate Heat sulatg plate of mold utomatic safety door (UN4505-N to UN6305-N) Larger ejection force and ejector stroke Multiple operatg languages Increased mold thickness Hydraulic System Magnetic platen EUROMP 67 based robot terface Mold liftg device Servo pump system Self-lubricated bushes tie bars High-precision bypass oil filter Injection Unit Low-noise energy-savg hydraulic circuit Parallel double-cylder jection system SPI standard based ejector hole pattern Low-speed high-torque hydraulic motor SPI standard based mold locatg hole (stationary platen) Nitrided alloy-steel screw and bimetallic barrel Imported hydraulic control valve Energy-savg groove design of barrel (patented design) Imported seal Multi-stage PID nozzle and barrel temperature control Differential fast mold closg device (UN655-N to UN3605-N) Double-carriage cylder uilt- cooler (UN655-N to UN3605-N) Fully-closed heat retag cover Hydraulic circuit design of mold openg stop old start protection utomatic oil temperature detection and alarm utomatic purgg Safety cable for exposed high-pressure hydraulic hose retention Selectable suck-back before or after plasticizg set of core pull and core pull terface with valve Movable hopper (UN655-N to UN3605-N ) Mold water-coolg devices with fast connectors Three-bearg drive shaft (UN25-N and larger models) Synchronized ejection and core pullg system Screw speed detection Plasticizg proportional back pressure control Nozzle safety cover (with electrical protection) Oil temperature pre-heatg system eramic heater band Variable-displacement pump system Lear guide rail Multi-size larger oil pump and motor Dedicated barrel and screw assembly (electroplatg, alloy, P, PMM, PT, P, etc) Multi-size larger plasticizg motor arrel air-coolg device Synchronized ejection and core pullg (UN655-N to UN55-N) Sprg shut-off nozzle High-response servo jection system with accumulator Increased jection stroke or one-size larger (smaller) jection unit Multiple sets of core pull devices Swivel jection unit (UN25-N to UN11255-N) Hydraulic unscrewg device arrel heat-retag energy-savg device (silicone heat preservation, frared heatg) Electrical System Glass-tube flowmeter Other Mandatory barrel heatg protection Operation manual Input/output spection Levelg pad utomatic heat retag and automatic heatg settg toolkit and a precision filter element Ways of switchg from jection to holdg pressure: time / position / time + position Mold clamp 12.1'' TFT color touch screen Spare parts (details as per sales contract ) Large processes data storage capacity, with US ports/ F card Dryer Operatg languages: hese, English, Spanish and Portuguese uto loader Three-color alarm light hiller olor mixg signal terface PET preform mold Lear guide Th-wall packagg mold 23 24
UN7305-N to UN11255-N Features Standard Optional Standard Optional lampg Unit Low-noise hydraulic system Precision transducer for clampg / ejector stroke control Hydraulic oil coolg device lampg platens and toggles made from highly-rigid ductile iron Safety retention device for high-pressure hydraulic hose 2-stage ejector forward / backward controlled by computer Oil level detection Forced ejector back function set of core pull device with extra terface for stationary platen Various ejection function settgs set of core pull device with extra terface for movg platen Hydrulic gear-type mold height adjustg device Oil pre heatg function Mechanical / Electrical / Hydraulic safety devices Independent oil temperature control system Wear-resistant manganese steel bands and supportg tracks for movable platen Synchronized ejection and core pull utomatic centralized lubrication system Unscrewg device Platen with T-slots and mold mountg holes High response servo jection system SPI standard based ejector hole pattern High response servo mold openg and closg system SPI standard based mold locatg hole (stationary platen) Plasticizg durg mold openg Increased mould thickness (/) Enlarged oil cooler Mold heat sulatg plate One size larger oil pump and motor Special mould fixg hole Extra hydraulic core pull utomatic tie bar extraction device Extra hydraulic unscrewg Self-lubricated bushes tie bars Electrical System Injection Unit EU67 robot terface Nitrided alloy-steel screw and bimetallic barrel Input / output spection function Nozzle PID temperature control utomatic heat retag and automatic heatg settg Double-carriage cylder Time / position / time + position control of switchover to hold pressure Screw cold start protection function Independent adjustment of the action slope utomatic purgg ore-pull/ unscrewg program terface Selectable suck-back before or after plasticizg Processes data lockg function Multi-stage barrel PID temperature control. 12'' TFT color LD utomatic jection and plasticizg failure detection Operatg languages: hese, English, Spanish and Portuguese Precision jection/plasticizg transducer Three-color alarm light 6-stage jection speed / pressure /position olor mixg signal terface 5-stage holdg pressure speed / pressure / time control Electrical unscrewg device and terface 5-stage plasticizg speed / pressure / time control Hot runner terface and connector Screw speed detection ir-assisted jection device and connector Extended nozzle ir bow device Purge guard (with safety switch) Power supply voltage change Proportional back pressure control Extra automatic safety door Lear guide rail lampg force testg and display eramic heater band Sequential jection valve gate Special screw unit (PET/ P/P/ PMM/ TPU/ UPV) entral (networked) monitorg system i-metallic barrel unit Other lowg device of barrel Operation manual Sprg shut-off nozzle Levelg pad Magnetic grate base (with magnetic grates) Hand tools / Hand tools box Electric plasticizg Filter element Hydraulic shut-off nozzle Standard hopper Pneumatic shut-off nozzle Spare parts (details as per sales contract) Hydraulic System Mold temperature controller Servo pump system uto loader Precision by-pass oil filter Dehumidifier System pressure and flow calibration hiller Imported hydraulic control valve Dryg hopper Imported sea Water flow regulator Oil temperature detection and alarml PET preform mold Th-wall packagg mold 25 26