Price quote for: Engine Driven Brush chipper File: C796-102012 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat Patrick Schoen 1800 West Hwy 13 Burnsville, MN 55337 952-894-0894 877-262-2284 952-894-5759 Spec # Information Requested Answer Furnish separate price quote for: Engine Driven Brush Chipper 1.0 Engine Driven Brush chipper Make & Model MODEL 990XP (12" DRUM STYLE) BRUSH BANDIT Chipper inch capacity 12" Weight 5,250 (approximate) Engine type, model, HP, etc. Fuel tank size 24 1/2 gallon steel fuel tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge Battery size (CCA) 1,010 CCA Instrumentation Low oil/high Engine temperature shut down, temperature, amp, voltage gauges Trailer tires (2) 245/75R 16" Trailer suspension type & capacity Torflex EZ-lube 7,000 pound Trailer Brakes Electric brakes Trailer hitch type 2-1/2" Pintle ring Feed table length 66" Bandit 990XP Drum, Base Info Page 1
Distance from feed roller to ground 89" Feed rate 120 FPM Feed roller size and configuration Chipper cutting wheel size Spring loaded slide box type feed system with (2) horizontal feed wheels 7 1/2" diameter x 16 3/8" wide, driven by (2) 15.5 hydraulic motors (Provides approximately 1,646.93 lbs of pulling power for each feed wheel) 24" diameter x 18 3/4" wide Number of chipper knives 4 Knife description information 5/8" thick x 5 1/2" wide x 9" long dual edge knives Height of discharge chute 8' Chute rotation Hydraulic tank capacity Warranty 360 degree manual swivel discharge chute with 12" adjustable chip deflector 12 gallon steel hydraulic tank with magnetic drain plug, lockable filler cap, and aluminum sight gauge 1 Year/ 2,000 Hours $24,839.00 Bandit 990XP Drum, Base Info Page 2
Vendor Name: Make/Model: Tri-State Bobcat, Inc MODEL 990XP (12" DRUM STYLE) BRUSH BANDIT Base Price $24,839.00 2.0 Engine Options Spec # 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 Description Qty Price Subtotal gauges, mufflers, etc. Number the items starting with 2.1, 2.2, 2.3, etc., until you have listed all engine options. Use as many numbers as you need. Cummins B3.3, 74 horsepower engine with Twin Disc clutch - Tier 4i (990-RC1139-720) $ 2,681.40 $ - Caterpillar C2.2, 49.4 horsepower engine with auto clutch (will come with plastic fuel tank in lieu of steel) - Tier 4i (990-RC1041-622) $ 553.50 $ - Twin Disc clutch (will come with plastic fuel tank in lieu of steel) - Tier 4i (990-RC1062-643) $ - $ - Caterpillar C3.4T, 84.5 horsepower engine with 13" PGL auto clutch - Tier 3 (slant roof) (990-RC0991-575) $ 1,697.40 $ - Caterpillar C3.4T, 84.5 horsepower engine with NACD clutch - Tier 3 (slant roof) (990- RC1119-699) $ 1,697.40 $ - Caterpillar C4.4, 97 horsepower with NACD over center clutch - Tier 3 (990-RC0973-556) $ 3,583.40 $ - Caterpillar C4.4, 114 horsepower with NACD over center clutch - Tier 3 (990-RC0933-515) $ 5,711.30 $ - Perkins 404D-22, 49.4 horsepower with auto clutch (will come with plastic fuel tank in lieu of steel) - Tier 4i (990-RC1037-618) $ 533.00 $ - Perkins 404D-22 49.4 horsepower with Twin Disc clutch (will come with plastic fuel tank in lieu of steel) - Tier 4i (990-RC1138-719) $ - $ - Perkins 804D-34T, 84.5 horsepower with 13" PGL auto clutch - Tier 3 (slant roof) (990- RC0996-580) $ 1,656.40 $ - Perkins 804D-34T, 84.5 horsepower with NACD over center clutch - Tier 3 (slant roof) (990-RC0997-581) $ 1,676.90 $ - Perkins 1104D, 97 horsepower with 13" PGL auto clutch - Tier 3 (990-RC0975-558) $ 3,681.80 $ - Perkins 1104D, 97 horsepower with NACD over center clutch - Tier 3 (990-RC0976-559) $ 3,599.80 $ - Perkins 1104D-E44T 114 horsepower with NACD over center clutch - Tier 3 (990-RC0931-513) $ 5,612.90 $ - Kubota V2203M, 48.1 horsepower engine with 7 1/2" NACD over center clutch - Tier 4i (slant roof package) (990-RC1135-716) $ 533.00 $ - Kubota V3600T, 84.5 horsepower with 11 1/2" NACD over center clutch - Tier 3 (Slant roof package) (990-RC1136-717) $ 1,697.40 $ - Bandit 990XP Drum, Pricing Page 1
2.17 Kubota V3800DIT, 99.2 horsepower with 11 1/2" NACD over center clutch - Tier 3 (slant roof package) (990-RC1137-718) $ 3,398.90 $ - 2.18 John Deere 4024HF285, 80 horsepower with NACD over center clutch - Tier 3 (Engine comes with a 2 year / 2,000 hour engine warranty) (990-RC1142-723) $ 4,009.80 $ - 2.19 John Deere 4045HF285, 115 horsepower with NACD over center clutch - Tier 3 (990- RC0855-437) $ 6,289.40 $ - 2.20 Perkins 854E-E34TA, 115 horsepower with NACD over center clutch - Tier 4i (990- RC1165-746) $ 10,783.00 $ - 2.21 Tachometer and hour meter (990-100027) $ 182.75 $ - 2.22 Spark arrestor muffler (990-100035) $ 144.50 $ - 2.23 Shut-off switch for engine shut-down located on both sides of infeed hopper (990-100048) $ 403.75 $ - 2.24 Engine block heater (990-100040) $ 148.75 $ - 2.25 Restriction indicator on air cleaner, pop-up type. (990-100039) $ 76.50 $ - 2.26 Engine pre cleaner - Engine Air (John Deere Engines only) (990-100042) $ 127.50 $ - 2.27 Heavy-duty lockable filler cap covers (990-100118) $ 123.25 $ - 2.28 Shut- off valve for fuel tank (990-100124) $ 80.75 $ - 3.0 Trailer options Use this section to list trailer options such as flotation tires, different hitches, number these items starting with 3.1, 3.2, 3.3, etc. 3.1 Single 7,000 pound Torflex EZ lube hydraulic brake axle (Free backing) (in lieu of standard axle) (990-100448) $ 629.00 $ - 3.2 (2) 245/75R 16" tires mounted on 8-bolt aluminum rims (Tire is approximately 9.65" wide, tire capacity is 3,045 pounds each) (in lieu of standard tires) (990-100650) $ 233.75 $ - 3.3 (2) 265/75R 16" tires mounted on 8-bolt white spoke rims (Tire is approximately 10.43" wide, tire capacity is 3,415 pounds each) (in lieu of standard or must be used for super sized feed system option) (990-100282) $ 127.50 $ - 3.4 2" Bulldog ball hitch (990-100175) $ 63.75 $ - 3.5 2 5/16" Bulldog ball hitch (990-100177) $ 63.75 $ - 3.6 3" Buyer's Product pintle hitch (990-100173) $ 63.75 $ - 3.7 3" pintle hitch with Model 20 actuator for hydraulic brake axles (990-100737) $ 382.50 $ - 3.8 2 5/16" ball hitch with Model 20 actuator for hydraulic brake axles (990-100233) $ 382.50 $ - 3.9 Spare tire mount (990-100080) $ 119.00 $ - 3.10 Spare tire mounted on white spoke rim (245/75R 16") (990-100183) $ 233.75 $ - 3.11 Spare tire mounted on aluminum rim (245/75R 16") (990-100356) $ 306.00 $ - 3.12 Spare tire mounted on white spoke rim (265/75R 16") (990-100184) $ 276.25 $ - Bandit 990XP Drum, Pricing Page 2
3.13 7-PRONG (Round Pin) Male trailer plug (990-100088) $ 42.50 $ - 3.14 7-PRONG (Flat Pin/RV-Style) Male trailer plug (990-100089) $ 38.25 $ - 3.15 (2) Mud Flaps (1/4" x 12" x 18") (990-100082) $ 80.75 $ - 3.16 5,000 pound capacity tongue jack with 2,500 pound HD steel caster wheel (in lieu of standard tongue jack) (990-1011-26) $ 157.25 $ - 3.17 5,000 pound capacity tongue jack with 2,500 pound HD caster wheel. (Includes standard jack to raise top feed wheel, if hydraulic lift cylinder is not ordered). (990-1011-25) $ 208.25 $ - 3.18 Telescoping tongue with single 20" adjustment (990-100759) $ 382.50 $ - 3.19 Single rear stabilizer (990-100090) $ 144.50 $ - 4.0 Chipper options Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc. 4.1 Model 990XP basic package (Engine horsepower options ranging from 48.1 to 86) (990-1013-83) $ - $ - 4.2 Model 990XP heavy-duty package (To be selected with engine horsepower options ranging from 97 to 115 or hydraulic winch option) (990-1013-84) $ 500.00 $ - 4.3 Reversing Auto Feed with digital tach/hour meter for drum-style chipper (Unit with standard feed system) (990-1011-70) $ 1,049.75 $ - 4.4 29" high x 45" wide tapered infeed hopper with 30" WELD on infeed tray (990-1012-39) $ 318.75 $ - 4.5 29" high x 54" wide tapered infeed hopper with 30" fold down infeed hopper tray and spring lift assists (990-1014-56) $ 488.75 $ - 4.6 29" high x 54" wide tapered HD infeed hopper with lexan taillight covers and 30" weld on infeed tray (990-1015-79) $ 828.75 $ - 4.7 Dual spring lift assists for infeed hopper (990-100061) $ 110.50 $ - 4.8 Heavy-duty steel taillight covers (990-100083) $ 123.25 $ - 4.9 Deluxe Discharge Option Package: Hand crank height adjustable discharge and 345 degree hand crank swivel discharge with manual 12" chip deflector. (990-100153) $ 590.75 $ - 4.10 Deluxe Option Package: Hand crank height adjustable discharge, 345 degree hand crank swivel discharge with manual 12" chip deflector, hydraulic lift cylinder, and Reversing Auto Feed system (990-1011-72) $ 2,337.50 $ - 4.11 Clean out and inspection door on transition. (990-100105) $ 148.75 $ - 4.12 Hand crank height adjustable discharge (990-100103) $ 340.00 $ - 4.13 345 degree hand crank swivel discharge with 12" adjustable chip deflector (990-100104) $ 403.75 $ - 4.14 Stops on discharge - 270 degree turn. (990-100102) $ 34.00 $ - Bandit 990XP Drum, Pricing Page 3
4.15 270 degree hydraulic controlled swivel discharge chute with manual 12" chip deflector (990-100100) $ 1,100.75 $ - 5.0 Hydraulic options Use this section to offer live hydraulics, hydraulic wench, etc. 5.1 Hydraulic winch mounted on infeed hopper with (does not include cable or rope), hydraulic lift cylinder for top feed wheel, hand crank height adjustable discharge, and Reversing Auto Feed system (Please specify if (990-1014-01) $ 4,271.25 $ - 5.2 Winch mount plate (Allows for the winch to easily be added in the future, must select HD package) (990-1014-66) $ 212.50 $ - 5.3 Install bracket for winch and selector valves on side of infeed hopper (To be ordered if winch might be ordered in the future) (990-100956) $ 63.75 $ - 5.4 Hydraulic lift cylinder for top feed wheel (controlled manually unless wireless radio remote option is selected) (990-1011-71) $ 807.50 $ - 5.5 "Patented" Kar-Tech radio remote for hydraulic lift cylinder (Note: In lieu of a manual lift cylinder bar, lift cylinder control switches will be mounted on each side of infeed to allow lift cylinder control if needed (must also select hydraulic lift cyli (980-1002-52) $ 1,508.75 $ - 5.6 Hydraulic winch mounted on infeed hopper (does not include cable or rope) (Please specify if winch end is to be set-up to accept rope (aluminum fairlead) or cable (steel rollers)) (990-1013-85) $ 2,507.50 $ - 5.7 "Patented" Kar-Tech radio remote control kit for hydraulic winch only (Must also select hydraulic winch option) (980-1002-51) $ 1,253.75 $ - 5.8 "Patented" Kar-Tech radio remote control kit for hydraulic winch and hydraulic lift cylinder (Note: In lieu of a manual lift cylinder bar, lift cylinder control switches will be mounted on each side of infeed to allow lift cylinder control if needed. Must (980-1002-53) $ 2,188.75 $ - 5.9 Hydraulic flow control for feed wheel rate adjustment (for units with autofeed) (990-100750) $ 242.25 $ - 5.10 Hydraulic flow control for feed wheel rate adjustment (for units without autofeed) (990-100053) $ 276.25 $ - 5.11 In-line Hydraulic pressure check system (for units with autofeed) (990-100055) $ 225.25 $ - 5.12 In-line hydraulic pressure check system (for units without autofeed) (990-100752) $ 263.50 $ - 5.13 Biodegradable hydraulic oil (Petro Environ MV46), includes 16 gallon hydraulic tank and hydraulic oil cooler (990-101045) $ 1,270.75 $ - 5.14 Gate valve for hydraulic tank (990-100127) $ 110.50 $ - Bandit 990XP Drum, Pricing Page 4
6.0 Other options Use this section to offer other options 6.1 Standard Imron Industrial Urethane Bandit Yellow (333-32273) $ - $ - 6.2 Standard Imron Industrial Urethane Alert Orange (333-23662) $ - $ - 6.3 Standard Imron Industrial Urethane Cat. Yellow (333-28982) $ - $ - 6.4 Standard Imron Industrial Urethane Green (333-28984) $ - $ - 6.5 Standard Imron Industrial Urethane White (333-67632) $ - $ - 6.6 Standard Imron Industrial Urethane Black (N0001) $ - $ - 6.7 Model 990 wear kit (Includes 3 sets of knives, bolts, and nuts/washers, along with 1 anvil with hardware, knife sharpener, and anvil gauge) (990-wk) $ 714.00 $ - 6.8 Knife saver kit (includes sharpener, file, safety gloves, and carrying case) (990-100190) $ 51.00 $ - 6.9 Additional Model 990 drum anvil (990-1012-99) $ 63.75 $ - 6.10 Debris resistant bearing package in lieu of standard (990-100112) $ 165.75 $ - 6.11 100115) $ 136.00 $ - 6.12 Drum chipper tool kit to change knives (937-1000-48) $ 55.25 $ - 6.13 Lockable aluminum tool box (990-100079) $ 119.00 $ - 6.14 Wheel chock holders on fenders (2) - Painted Steel (weld on) (990-100085) $ 144.50 $ - 6.15 Wheel chock holders on fenders (2) - Tread Bright aluminum (bolt on) (990-100086) $ 144.50 $ - 6.16 100087) $ 80.75 $ - 6.17 Amber strobe warning light mounted on top of engine shroud (990-100129) $ 263.50 $ - 6.18 Brush guard for amber warning light (990-100130) $ 34.00 $ - 6.19 Extra chipper operators manual (standard version) (990-100133) $ 34.00 $ - 6.20 Extra engine operator's manual (990-100134) $ 76.50 $ - 6.21 Hydraulic Last Chance Cables (990-100128) $ 374.00 $ - 6.22 2 1/2 pound fire extinguisher with mount (990-100136) $ 80.75 $ - 6.23 Pole style cone holder (990-100131) $ 89.25 $ - 6.24 Hoop style cone holder (990-100132) $ 148.75 $ - 6.25 Special hoop style cone holder (Allows for more cones, click on option number for specs) (911-2000-73) $ 250.75 $ - 6.26 Spring loaded cleanout door (in lieu of standard) (990-100342) $ 127.50 $ - 7.0 Performance / Warranty options Use this section to offer performance/warranty options, number these items starting with 7.1, 7.2, 7.3, etc (Specify years, miles or hours extended term covers.) Bandit 990XP Drum, Pricing Page 5
7.1 1 Year (Bandit parts only) extended warranty. Total warranty - 24 months / 2000 hours (990-100383) $ 722.50 $ - 7.2 2 Year (Bandit parts only) extended warranty. Total warranty - 36 months / 3000 hours (990-100384) $ 1,253.75 $ - 7.3 $ - 8.0 Used Brush Chipper Rental Rates Use this section to offer brush chipper or rental rates. State price per hour, week or month and percent of rent that applies if unit is purchased. 8.1 $ - 8.2 $ - 8.3 $ - 9.0 New Equipment rental Program If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 10.0 Vendor Owned Rental Return or Demo Equipment Program See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 11.0 Delivery Charges Delivery Charges - Delivery Starting Point - City, State, Zip: Price per loaded mile: $ 12.0 - Discount Off List DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number % Discount Bandit 990XP Drum, Pricing Page 6