Diamond Chain Harrow. Parts Manual. Model 45 Revision B. Kelly Engineering PO Box 100 Booleroo Centre SA 5482 Australia

Diamond Chain Harrow Parts Manual Model B Kelly Engineering PO Box 00 Booleroo Centre SA 8 Australia Phone: + 8 87 Fax: + 8 87 0 Email: office@kellyengineering.com.au Website (US): www.kellyharrows.com Website (Australia): www.kellyengineering.com.au

Thank you for choosing a Kelly Engineering product We trust that you find the following manual clear and easy to follow. If you should require additional customer support or assistance, please do not hesitate to contact us. Spare parts can be purchased, as required, through your local dealer or by contacting Kelly Engineering Australia or in the United States, Hood & Company. Kelly Engineering welcomes feedback. Should you have any difficulties that you wish to raise, suggestions for improvement or modifications that you feel would enhance our products we look forward to hearing from you. Australia Kelly Engineering PO Box 00 Booleroo Centre SA 8 Phone: + 8 87 Fax: + 8 87 0 Email: sales@kellyengineering.com.au Spare Parts: parts@kellyengineering.com.au Website: www.kellyengineering.com.au United States Kelly Engineering st Street PO Box New Glarus WI 7 Phone: 08 7 8 Mobile: 0 78 Email: waynerosenbaum@kellyharrows.com Website: www.kellyharrows.com Spare Parts Hood & Company Inc Spring ield MO Phone: 7 8 00 Fax: 7 8 0 Email: hoodco@hoodco.com

Model Parts Manual index. 08-00 ( Kelly Diamond Harrow). 080-08A (Drawbar assembly).. 0-00 (Hyd Cylinder x Extended).. 0-7 (Hyd Cylinder x Extended).. 080-09A (Tow Hitch Assembly).. 080- (Safety Chain Assembly).. 080-A (Parallel Arm Assembly).. 080-A (Jack Assembly).7. 080-A (Hose Post Assembly). 080-0A (Rear Tail Assembly).. 080-PCHB (0mm Bolt Swivel Unit).. 080-0 (Tail Chain Stop Guard Assembly).. 080- (Rear Tail Guard Assembly).. 080-98 (Angled Chain Guard Assembly). 080-8-0A (0- Front Module Assembly).. 0-0 (Hyd Cylinder. x Side Port).. 080-PCHB (0mm Bolt Swivel Unit).. 080-0FA-0- (0/ Front Module Tension Assembly). 080-9-0A (0- Rear Module Assembly).. 0-0 (Hyd Cylinder. x Side Port).. 080-PCHB (0mm Bolt Swivel Unit).. 080-0RA-0- (0/ Rear Module Tension Assembly). 08-0A ( Centre Frame Assembly).. 0-00 ( x 0 Hydraulic Cylinder).. 07-SH79880 (.7 R Tonne 8 on 8 PCD Hub & Stub Complete).. 080-900 (Dual Circuit Stage Sequence Manifold V9) 7. 08-0A ( Front A-Frame Assembly) 7.. 080-PCHB (0mm Bolt Swivel Unit) 7.. 080-7-FA ( Front Chain Carrier Assembly) 7.. 080-8R-FA (Right Hand Front M Assembly) 7.. 080-9L-FA (Left Hand Front M Assembly) 8. 08-0A ( Rear A-Frame Assembly) 8.. 0-98 (Hyd Cylinder. x ) 8.. 080-0EB (Rear A-Frame Export Sign/Light Brackets) 8.. 080--70A (70mm Jockey Wheel Assembly) 8...07-K08TS (Axle R T on PCD 0 OHF) 8.. 080-CAL (Jockey Wheel Brake Caliper) 8.. 080-7-RA ( Rear Chain Carrier Assembly) 8.. 080-8R-RA (Left Hand Rear M Assembly) 8.7. 080-9A (Centre Rear M Assembly) 8.8. 080-9L-RA (Right Hand Rear M Assembly) 8.9. 080-09A (Outrigger Assembly) 8.0. 080-0A (LH Oversize Sign Assembly) 8.. 080-A (RH Oversize Sign Assembly) 9. 08-0A ( RH Inner Wing Assembly) 9.. 0-97 ( x Hydraulic Cylinder) 9.. 080-0 (Wing Light Assembly) 0. 08-0A ( LH Inner Wing Assembly) 0.. 0-97 ( x Hydraulic Cylinder) 0.. 080-0 (Wing Light Assembly). 08-0A ( RH Outer Wing Assembly).. 07-SH79880 (.7 R Tonne 8 on 8 PCD Hub & Stub Complete).. 080-PCHB (0mm Bolt Swivel Unit).. 080-PCHTAA (Chain Tension Assembly). 08-07A ( LH Outer Wing Assembly).. 07-SH79880 (.7 R Tonne 8 on 8 PCD Hub Stub Complete).. 080-PCHB (0mm Bolt Swivel Unit).. 080-PCHTAA (Chain Tension Assembly). 080--FL&R ( Front Chain). 080--LHR ( Left Hand Rear Chain). 080--RHR ( Right Hand Rear Chain). 080--MOD (0- Module Chain) 7. Appendix 7.. Hydraulic Fittings Parts Information 7.. Electrical 7.. Swivel Unit Rebuild 7.. Drop Leg Rebuild 7.. Swivel Ball Joints

Parts

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 080-08A B Drawbar Assembly 080-0A G Rear Tail Assembly 080-8-0A B 0-' Front Module Assembly 080-9-0A A 0/' Rear Module Assembly 08-0A C ' Centre Frame Assembly 08-0A B ' Front A-Frame Assembly 7 08-0A C ' Rear A-Frame Assembly 8 08-0A B ' RH Inner Wing Assembly 9 08-0A B ' LH Inner Wing Assembly 0 08-0A B RH Outer Wing Assembly 08-07A B ' LH Outer Wing Assembly ITEM NO. PART NUMBER DESCRIPTION QTY. 080--FL&R ' Front Chain 080--LHR ' Left Hand Rear Chain 080--RHR ' Right Hand Rear Chain 080--MOD 0-' Module Chain 9 8 7 0 08-00 ' Kelly Diamond Harrow 0 - B

Section ITEM NO. PART NUMBER DESCRIPTION QTY. Notes 0- A M x grade 8.8 ZP Bolt 0-NYL Nyloc Nut M 0-00 A Hyd Cylinder x Extended 0,0,' Domestic Machines only 0-7 A Hyd Cylinder x Extended All Export Machines & 0,0' Domestic 0-PINLOOPSQ8 A Square Loop Pin M8 x 0800-. B Cylinder Safety Stop 7 080-0-0 A Tow Hitch Pivot Pin 8 080-08 D-0 Draw Bar Frame 9 080-09A B Tow Hitch Assembly 0 080- B Safety Chain Assembly 080-A B Parallel Arm Assembly 080-A B Jack Assembly 0,0," machines only 080-7A A Heavy Duty Jack Assembly 0,0' machines only 080-A B Hose Post Assembly 8 9 7 0 080-08A Drawbar Assembly (080-0)- B

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-0SHSCREW A Shoulder Screw M x x 0 0-SPRINGCUP A Compression Cup Washer 7 0-EF00 Seal Kit " 0-00B " x " EXT Cylinder Barrel 0-00C Clevis For 97, 0, 00, 98 Cylinders 0-00R " x " Cylinder Rod 7 0-7CPLATE Mount Plate For 7 Cylinder Spacers 8 0- Valve Body 9 0-0 A : Pilot Ratio, Counterbalance Valve 0 0-RCLIP R Clip mm 0800-78 A Cylinder Depth Stop Plate 0 080-0898 A Clevis Pin " x 7mm 8 9 7 0 0-00 Hyd Cylinder x Extended All (008)- A.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-0SHSCREW A Shoulder Screw M x x 0 0-SPRINGCUP A Compression Cup Washer 7 0-EF0 Seal Kit " 0-7B " x " EXT Cylinder Barrel 0-7C Clevis For 78 Cylinder 0-7CPLATE Mount Plate For 7 Cylinder Spacers 7 0-7R B " x " Cylinder Rod 8 0- Valve Body 9 0-0 A : Pilot Ratio, Counterbalance Valve 0 0-RCLIP R Clip mm 0800-78 A Cylinder Depth Stop Plate 0 080-0898 A Clevis Pin " x 7mm 8 9 7 0 0-7 Hyd Cylinder x Extended 0/0 (000-0)- A.

ITEM NO. PART NUMBER DESCRIPTION QTY. NOTES 07-D00-080 A Criclip External 8mm 080-KE-090--B A Hardened Tow Hitch Bush /" As Standard 080-KE-090--C A Hardened Tow Hitch Bush /" Optional Upgrade 080-09 C Tow Hitch 080-09A Tow Hitch Assembly 0/0/0 -.

ITEM NO. PART NUMBER DESCRIPTION QTY. 080-CFHG Clevis Grab Hook 080-CMAHN Grade 80 Conn. Link mm 080-KESCLA B Safety Latch Assembly 080-CHHT Transport Chain mm @.m 080- Safety Chain Assembly All (008)- B.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-F Washer Flat M 0-PINC0 A Cotter Pin M x 0 080-KE007- A Clevis Pin mm x 7mm 080- D-0 Parallel Arm 080-A Parallel Arm Assembly (080-0)- B.

ITEM NO. PART NUMBER DESCRIPTION QTY. 080-B077 A Jack Pin 080-DG70SFC-H A Jack Handle 080- D-0 Jack Assembly NOTE: A RHS Size x x B RHS Size 7 x 7 x 080-A Jack Assembly //0 B.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-80 M8 x 0 grade 8.8 ZP Bolt 0-M0MZPHTF E M x 0 Trilobe self tapping Scew 0-NYL8 Nyloc Nut M8 0-70B E Electrical Plug Keeper 080- B Hose Post E = For Export machines only 080-A Hose Post Assembly (080-R)- B.7

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0- M x grade 8.8 ZP Bolt 0-00 ST A M0 x 0 grade 0.9 ZP Short Thread Bolt 0-NYL Nyloc Nut M 0-NYL0 Nyloc Nut M0 0-HT-8 Washer High Tensile /8" 080-0- A Chain Mount Pivot Pin 7 080-KE0 B Height Adjustor Retaining Clip 8 080-PCDCS A Tie Plate Bush ITEM NO. PART NUMBER DESCRIPTION QTY. 9 080-DCTP-0 A Disc Chain Tie Plate Link 0mm 0 080-PCHB A 0mm Bolt Swivel Unit 080-0 J- Rear Tail 080-0 B Tail Chain Stop Guard Assembly 080- B Rear Tail Guard Assembly 080-PCHMCA A Height Adjusting Chain Assembly 080-0FA-0- C-0 0/' Front Module Tension Assembly 080-0RA-0- C-0 0-' Rear Module Tension Assembly 7 080-98 Angled Chain Guard Assembly 7 7 0 9 8 080-0A Rear Tail Assembly (08-)- H-0

ITEM NO. PART NUMBER DESCRIPTION QTY. 0- Bearing RS 0-TC88 TC Seal mm x 80mm x 8mm 080-PCHBH Housing to Suit PCHB Swivel 080-PCHBS Shaft To Suit PCHB Swivel 080-PCHBWA Washer To Suit PCHB Swivel 080-PCHBC Cap To Suit PCHB Swivel SECTION A-A 080-PCHB 0mm Bolt Swivel Unit 00-.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 07-77 U-Bolt M x Deep x 77 Wide 0800-0. B Tail Chain Stop Guard 080-0 Tail Chain Stop Guard Assembly (0-)- B.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 07-77 U-Bolt M x Deep x 77 Wide 0800- B Rear Tail Guard 080- Rear Tail Guard Assembly (0-0)- B.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0800-98 B-0 Angled Chain Gaurd 07-77 U-Bolt M x Deep x 77 Wide A 0-F Washer Flat M 0-NYL Nyloc Nut M A B B C C DO NOT SCALE DRAWING REVISION D Rev Date (0-)- Tolerance (UNO).XX 0.mm.X 0.mm X. 0.mm XX..0mm XXX..0mm XXXX..0mm.X 0. X 0. TITLE: Angled Chain Guard Assembly DRAWN CHK'D APPV'D NAME SIGNATURE DATE MATERIAL: DWG NO. O Clothier 0/0/0 080-98 Approval via EPDM WEIGHT: "8.0 Kg Kg SCALE:: SHEET OF A.

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0- A M x grade 8.8 ZP Bolt 0-0 A M x 0 grade 8.8 zp Bolt 8 0-00 ST A M0 x 0 grade 0.9 ZP Short Thread Bolt 0-NYL Nyloc Nut M 0-NYL Nyloc Nut M 8 0-NYL0 Nyloc Nut M0 7 0-F Washer Flat M 8 0-HT-8 Washer High Tensile /8" 9 0-PINC0 A Cotter Pin M x 0 0 0-0 A Hyd Cylinder." x " Side Port 0800-0. B Module Lift Plate ITEM NO. PART NUMBER DESCRIPTION QTY. 080-0- A Chain Mount Pivot Pin 080-KE0 B Height Adjustor Retaining Clip 080-KE007- A Clevis Pin mm x 7mm 080-PCDCS A Tie Plate Bush 080-PCHMCA A Height Adjusting Chain Assembly 7 080-PCHMCA A Height Adjusting Chain Assembly 8 080-DCTP-0 A Disc Chain Tie Plate Link 0mm 9 080-PCHB A 0mm Bolt Swivel Unit 0 080-0 B Chain Mt Arm 080-8-0 B 0/' Front module 080-0FA-0- B 0/' Front Module Tension Assembly 0 9 7 8 7 8 9 0 080-8-0A 0-' Front Module Assembly (009-0)- B

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-EF000 Seal Kit." 0-0B A." x " Cylinder Barrel Side Port 0-0R A." x " Cylinder Rod 0-00C Clevis For 97, 0, 00, 98 Cylinders 0-RCLIP R Clip mm 080-0898 A Clevis Pin " x 7mm 0-0 Hyd Cylinder." x " Side Port All(008)- A.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-MB 0DX A ID x 0mm DX Bush 0-00 A M0 x 0 grade 8.8 ZP Bolt 0-NYL0 Nyloc Nut M0 0-HT- Washer High Tensile /" 0-PINC0 A Cotter Pin M x 0 080-0-0 B Module Pivot Arm Bush 7 080-0-SL A Rigid Spring Locator ITEM NO. PART NUMBER DESCRIPTION QTY. 8 080-KE007- A Clevis Pin mm x 7mm 9 080-PCHTA-N B ACME Lock Nut / - NA - G 0 080-PCHTA-SB B Steel Spring Retaining Bush 080-XK9S A 0mm Compression Spring 080-0F B Front Module Tension Body 080-0-0- A 0/' Module Tension Arm 080-0 C Module Tension Linkage 8 7 0 9 080-0FA-0-0/' Front Module Tension Assembly 0//0 (00-R)- B.

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0-0 A M x 0 grade 8.8 ZP Bolt 0- A M x grade 8.8 ZP Bolt 0-0 A M x 0 grade 8.8 zp Bolt 8 0-00 ST A M0 x 0 grade 0.9 ZP Short Thread Bolt 0-NYL Nyloc Nut M 0-NYL Nyloc Nut M 8 7 0-NYL0 Nyloc Nut M0 8 0-F Washer Flat M 9 0-HT-8 Washer High Tensile /8" 0 0-PINC0 A Cotter Pin M x 0 0-0 A Hyd Cylinder." x " Side Port 0800-0. B Module Lift Plate ITEM NO. PART NUMBER DESCRIPTION QTY. 0800-7. B Module Cylinder Guard 080-0- A Chain Mount Pivot Pin 080-KE0 B Height Adjustor Retaining Clip 080-KE007- A Clevis Pin mm x 7mm 7 080-PCDCS A Tie Plate Bush 8 080-PCHMCA A Height Adjusting Chain Assembly 9 080-PCHMCA A Height Adjusting Chain Assembly 0 080-DCTP-0 A Disc Chain Tie Plate Link 0mm 080-PCHB A 0mm Bolt Swivel Unit 080-9-0 B 0'/' Rear Module 080- B Reducing Chain Mount Arm 0mm Clevis 080-0RA-0- B 0-' Rear Module Tension Assembly 9 9 0 7 8 7 0 8 080-9-0A 0/' Rear Module Assembly A

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-MB 0DX A ID x 0mm DX Bush 0-00 A M0 x 0 grade 8.8 ZP Bolt 0-NYL0 Nyloc Nut M0 0-HT- Washer High Tensile /" 0-PINC0 A Cotter Pin M x 0 080-0-0 B Module Pivot Arm Bush 7 080-0-SL A Rigid Spring Locator ITEM NO. PART NUMBER DESCRIPTION QTY. 8 080-KE007- A Clevis Pin mm x 7mm 9 080-PCHTA-N B ACME Lock Nut / - NA - G 0 080-PCHTA-SB B Steel Spring Retaining Bush 080-XK9S A 0mm Compression Spring 080-0R B Rear Module Tension Body 080-0-0- A 0/' Module Tension Arm 080-0 C Module Tension Linkage 7 0 8 9 080-0RA-0-0-' Rear Module Tension Assembly 0//0 (00-R)- B.

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0-00 A M0 x 0 grade 8.8 ZP Bolt 0- A M x grade 8.8 ZP Bolt 0-7 A M x 0 grade 8.8 zp Bolt 0-00 A M0 x 0 grade 8.8 ZP Bolt 0-NYL Nyloc Nut M 0-NYL0 Nyloc Nut M0 7 0-NYL Nyloc Nut M 8 0-F0 Washer Flat M0 9 0-S0 Washer Spring M0 ITEM NO. PART NUMBER DESCRIPTION QTY. 0 0-PINC Cotter Pin M x 0-00 " x 0" Hydraulic Cylinder 07-SH79880 A.7"R Tonne 8 on 8" PCH Hub and Stub Complete 07-.0-70-8TR B.0/70-8 Tyre On Rim 080-0-08-7 A Tail Frame Pivot pin 080-0-08- A PCH Wing Pivot Pin 080-900 A Dual Circuit Stage Sequence Manifold V9 7 08-0 C ' centre Frame 7 8 9 7 0 08-0A ' Centre Frame Assembly C

ITEM NO. PART NUMBER DESCRIPTION QTY. 08-GN- Grease Nipple /" UNF 0-F- Washer Flat /" 0-EF9 Seal Kit " 0-00B " x 0" Cylinder Barrel 0-00R " x 0" Cylinder rod 080-09- B Cylinder Pin /" x 0mm 0 7 080-09- A Cylinder Pin /" x mm 8 080-KE0 A S Locking Pin Clip mm 7 8 0-00 " x 0" Hydraulic Cylinder A.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-0 Bearing 0 (Cup & Cone) 0-AP7M 900 A AP7 Seal 90 x x 0mm 08-GN-8 A Grease Nipple /8" BSP 0-F- Washer Flat /" 0-PINC0 Cotter Pin M x 0mm 07-H9880 A T 8 on 8" PCD (Hub only) 7 07-7RTKE A T.7"R x 0mm Stub 8 07-D-CAPT A 9mm Cast Iron Screw in Cap 9 07-LWT A Lock Washer T Hub 0 07-NCAST A Castle Nut /" x 07-NW9- A Wheel Nut 9/" 90 Deg 8 07-WS9- A Wheel Stud 9/" UNF 8 7 9 8 0.70 9 07-SH79880.7"R Tonne 8 on 8" PCD Hub & Stub Complete '(0-)- A.

ITEM NO. PART NUMBER DESCRIPTION QTY. PORT 0-S- JIC/UNO 90 Elbow Extended EXT 0-S90 JIC/UNO Male Nipple CE x, CR x, RR, RE, LR, LE, TE, TR, TE, TR, TE, TR, EXT, RCT 0-S9- JIC/UNO 90 Elbow EXT, RCT, RCT 0-0 : Pilot Ratio, Counterbalance Valve L, L 0-CBCG-LJN. : Pilot ratio, Counterbalance valve L, L 0-CBCL-LJN.: Pilot ratio, Counterbalance valve L 7 0-CV0-0-0-N- Check Valve PSI Spring C, C, C, C 8 0-FR-A Regulator, Pressure-Compensated E, R 9 0-PR0-A Pressure Reducing/Relieviing Cartridge PR, PL 0 0-PSVP-0 Pressure Sequence Valve S, S, S, S 080-900B Dual Circuit Stage Sequence Manifold V9 8 7 9 0 080-900 Dual Circuit Stage Sequence Manifold V9 TO BE NOTED B.

Section 7 ITEM NO. PART NUMBER DESCRIPTION QTY. 0- A M x grade 8.8 ZP Bolt 0-00 ST A M0 x 0 grade 0.9 ZP Short Thread Bolt 7 0-M0MZPHTF M x 0 Trilobe self tapping Scew 0-NYL Nyloc Nut M 0-NYL0 Nyloc Nut M0 7 0-HT-8 Washer High Tensile /8" 7 0-PINC Cotter Pin M x 8 07-XUDS g x / U Hammer Drive Screw 9 09-OPMAN Diamond Harrow Operating Instruction Manual 0 080-0--970 B Drawbar Pivot Pin 080-0- A Chain Mount Pivot Pin 080-KE0 B Height Adjustor Retaining Clip ITEM NO. PART NUMBER DESCRIPTION QTY. 080-OMC- A Operator Manual Cannister 080-PCDCS A Tie Plate Bush 080-PCHMCA A Height Adjusting Chain Assembly 080-SDP Data Plate 7 080-DCTP-0 A Disc Chain Tie Plate Link 0mm 8 080-GW - A Gear Wrench /" 9 080-PCHB A 0mm Bolt Swivel Unit 0 080-7-FA A ' Front Chain Carrier Assembly 080-8R-FA B Right Hand Front M Assembly 080-9L-FA B Left Hand Front M Assembly 080-0 B Chain Mt Arm 08-0 D- 08-0 9 8 8 0 7 0 9 7 08-0A ' Front A-Frame Assembly B 7

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-CH0 M x 0 Coach Head Bolt 8 0-NYL Nyloc Nut M 8 0-NYL Nyloc Nut M 0-F Washer Flat M 8 0-F Washer Flat M 07-0 U-Bolt M x Deep x 0 Wide 7 07-07 U-Bolt M x 0 Deep x 7 Wide 8 0800-9. B Chain Carrier Mount Plate 9 080-7- C ' Chain Carrier Beam 0 080-7L C Chain Carrier Bolt on End 7 0 9 8 080-7-FA ' Front Chain Carrier Assembly C 7.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 0-RTRi-8 A Round Tube Insert 0. x.-mm 07-00 U-Bolt M x 0 Deep x 0 Wide 080-8R B Rignt Hand Off Set M 080-8R-FA Right Hand Front M Assembly B 7.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 0-RTRi-8 A Round Tube Insert 0. x.-mm 07-00 U-Bolt M x 0 Deep x 0 Wide 080-9L B Left Hand Off Set M 080-9L-FA Left Hand Front M Assembly B 7.

Section 8 ITEM NO. PART NUMBER DESCRIPTION QTY. 0-GE70DO-RS A Plain Spherical Bearing 70mm 07-J0 A Circlip Internal 0mm 0- A M x grade 8.8 ZP Bolt 0-NYL Nyloc Nut M 0-PINC Cotter Pin M x 0-98 B Hyd Cylinder." x " 7 080-0-08-7 A Tail Frame Pivot pin 8 080-KE070- A 70mm Polymer dust cap 9 080-0EB A Rear A-Frame Export Sign/Light Brackets 0 080--70A B 70mm Jockey Wheel Assembly 080-CAL C Jockey Wheel Brake Caliper ITEM NO. PART NUMBER DESCRIPTION QTY. 080-DISC A Jockey Wheel Brake Disc 080-7-RA A ' Rear Chain Carrier Assembly 080-8R-RA B Left Hand Rear M Assembly 080-9A B Centre Rear M Assembly 080-9L-RA B Right Hand Rear M Assembly 7 080-09A A Outrigger Assembly 8 080-09A A Outrigger Assembly 9 080-0A A LH Oversize Sign Assembly 0 080-A A RH Oversize Sign Assembly 08-0 C ' Rear A-Frame 8 9 8 7 9 0 7 0 08-0A ' Rear A-Frame Assembly C 8

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-EF00 Seal Kit." 0-98B A." x " Hydraulic Cylinder Barrel 0-98R A." x " Hydraulic Cylinder Rod 0-00C Clevis For 97, 0, 00, 98 Cylinders 0-RCLIP R Clip mm 080-0898 A Clevis Pin " x 7mm 0-98 Hyd Cylinder." x " '(0-)- B 8.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-M0MZPHTF M x 0 Trilobe self tapping Scew 0-CH080 A M8 x 0 Coach Head Bolt 0-NYL8 Nyloc Nut M8 0-F8 Washer Flat M8 0-0RG A 0RM Rubber Grommet 0-LED0RM A LED Stop Tail Lamp 7 0800-9. B SMV Sign Bracket 8 0800-9 A Rear Light Bracket 9 080-FBSMVTUF A Slow Moving Vehical Sign 9 7 8 Used On Export Machines Only 080-0EB Rear A-Frame Export Sign/Light Brackets All Export (/8/0)- A 8.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-0 A M x 0 grade 8.8 ZP Bolt 0-90 A M x 90 grade 8.8 zp Bolt 0-NYL Nyloc Nut M 0-S Washer Spring M 0-SQ0 A Washer Square M x 0 x 07-K08TS A Axle "R T on " PCD 0 OHF 7 07-L A LF Tyre on Rim 8 080--70 B 70mm Jockey Wheel 7 8 080--70A 70mm Jockey Wheel Assembly //009 B 8.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-00 Bearing Tapered Roller 0x90x.7 0-LM979-0 Bearing Tapered Roller 8.x.088x8.0 0-AP07 A AP7 Seal 90 x 0. x 0mm 08-GN-8 A Grease Nipple /8" BSP 0-F- Washer Flat /" 0-PINC0 Cotter Pin M x 0mm 7 07-H80 A T on " Hub Only 8 07-K08TS A " Round 0 OHF Stub Only 9 07-D-CAPLCT A Dust Cap Ali 70 Round 0 07-NCAST A Castle Nut /" x 07-NWH- A Wheel Nut /" 07-WS- A Wheel Stud /" x " 8 7 0 9.78 70 07-K08TS Axle "R T on " PCD 0 OHF //09- A 8..

ITEM NO. PART NUMBER QTY. 0-0 M x 0 grade 8.8 zp Bolt 0- Nut M 0-NYL Nyloc Nut M 0-SQ0 Washer Square M x 0 x 0800-0. Brake Caliper Plate 0800-9 Brake Caliper Pivot Plate 7 080-DB0 Disc Pads DB0 8 080-KE009 Brake Compression Spring 8 7 080- CAL Jockey Wheel Brake Caliper 0/07/0 - C 8.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-CH0 M x 0 Coach Head Bolt 8 0-NYL Nyloc Nut M 8 0-NYL Nyloc Nut M 0-F Washer Flat M 8 0-F Washer Flat M 07-877 U-Bolt M x 8 Deep X 77 Wide 7 07-07 U-Bolt M x 0 Deep x 7 Wide 8 0800-9. B Chain Carrier Mount Plate 9 080-7- C ' Chain Carrier Beam 0 080-7L C Chain Carrier Bolt on End 7 0 9 8 080-7-RA ' Rear Chain Carrier Assembly 8.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 0-RTRi-8 A Round Tube Insert 0. x.-mm 07-8077 U-Bolt M x 80 Deep x 77 Wide 080-8R B Rignt Hand Off Set M 080-8R-RA Left Hand Rear M Assembly B 8.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 0-RTRi-8 A Round Tube Insert 0. x.-mm 07-77 U-Bolt M x Deep x 77 Wide 080-9 D Straight Chain Carrier M 080-9A Centre Rear M Assembly B 8.7

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 0-RTRi-8 A Round Tube Insert 0. x.-mm 07-8077 U-Bolt M x 80 Deep x 77 Wide 080-9L B Left Hand Off Set M 080-9L-RA Right Hand Rear M Assembly B 8.8

ITEM NO. PART NUMBER DESCRIPTION QTY. 0- A M x grade 8.8 zp Bolt 0-CH0 M x 0 Coach Head Bolt 0-NYL Nyloc Nut M 0-NYL Nyloc Nut M 0-F Washer Flat M 080-09 B Outrigger 7 080-7L C Chain Carrier Bolt on End 7 080-09A Outrigger Assembly All(0)- A 8.9

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 0-TEK0- TEK Screw 0g x 0 07-7 U-Bolt M x Deep x 7 Wide 080-SIGNOSL A Oversize Sign Left Hand 080-0 A LH Oversize Sign Frame Used On Domestic Machines Only 080-0A LH Oversize Sign Assembly 8/9/0 - A 8.0

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-NYL Nyloc Nut M 0-F Washer Flat M 0-TEK0- TEK Screw 0g x 8 07-7 U-Bolt M x Deep x 7 Wide 080-SIGNOSR A Oversize Sign Right Hand 080- A RH Oversize Sign Frame Used On Domestic Machines Only 080-A RH Oversize Sign Assembly 8/9/0 - A 8.

Section 9 ITEM NO. PART NUMBER DESCRIPTION QTY. 0-MB 0DX A ID x 0mm DX Bush 08-GN-8 A Grease Nipple /8" BSP Deg 0-0 A M x 0 grade 8.8 ZP Bolt 0- A M x grade 8.8 ZP Bolt 0-NYL Nyloc Nut M 8 0-PINC Cotter Pin M x 7 0-97 A " x " Hydraulic Cylinder 8 080-0-08- A PCH Wing Pivot Pin 9 080-0 A Wing Light Assembly 0 08-0 B ' RH Inner Wing Frame 08-0P B ' Inner Wing Post 0 9 7 8 08-0A ' RH Inner Wing Assembly B 9

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-EF00 Seal Kit " 0-97B " x " Cylinder Barrel 0-97R " x " Cylinder Rod 0-00C Clevis For 97, 0, 00, 98 Cylinders 0-RCLIP R Clip mm 080-0898 A Clevis Pin " x 7mm 0-97 " x " Hydraulic Cylinder A 9.

ITEM NO. PART NUMBER DESCRIPTION QTY. 0-SH70 Socket Head Bolt M x 70 zp 0-NYL Nyloc Nut M 0-0RG A 0RM Rubber Grommet 0-LED0AM LED Rear Indicator Lamp 0800-9 A Wing light bracket 080-0 Wing Light Assembly A 9.

Section 0 ITEM NO. PART NUMBER DESCRIPTION QTY. 0-MB 0DX A ID x 0mm DX Bush 08-GN-8 A Grease Nipple /8" BSP Deg 0- A M x grade 8.8 ZP Bolt 0-NYL Nyloc Nut M 0-PINC Cotter Pin M x 0-97 A " x " Hydraulic Cylinder 7 080-0-08- A PCH Wing Pivot Pin 8 080-0 A Wing Light Assembly 9 08-0 B ' LH Inner Wing Frame 7 9 8 08-0A ' LH Inner Wing Assembly B 0

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0-MB 0DX ID x 0mm DX Bush 08-GN-8 Grease Nipple /8" BSP Deg 0-0 M x 0 grade 8.8 ZP Bolt 0-00 ST M0 x 0 grade 0.9 ZP Short Thread Bolt 0-070 M0 x 70 grade 8.8 ZP Bolt 0-0 M x 0 grade 8.8 zp Bolt 7 0-NYL Nyloc Nut M 8 0-NYL0 Nyloc Nut M0 8 9 0-NYL Nyloc Nut M 0 07-SH79880.7"R Tonne 8 on 8" PCH Hub and Stub Complete 07-.0-70-8TR.0/70-8 Tyre On Rim 080-KE080- Female Spring Locator 080-KE080- Tensioner Cup - Male ITEM NO. PART NUMBER DESCRIPTION QTY. 080-PCDCS Tie Plate Bush 080-PS mm Drop leg Spacer 080-PS0 0mm Drop Leg Spacer 7 080-DCTP-0 Disc Chain Tie Plate Link 0mm 8 080-PCHB 0mm Bolt Swivel Unit 9 080-PCHTA-S Short Chain Tension Adjustor 0 080-PCHTAA Chain Tension Assembly 080- LH Drop Leg 0mm Clevis 080- RH Drop leg 0mm Clevis 080- LH Chain Adjusting Lug 080-7 RH Chain Adjusting Lug 08-0D ' RH Dual Wheel Outer Wing 08-0DP ' Outer Wing Post 0 9 8 0 9 7 8 08-0DA ' DW RH Outer Wing Assembly E-0

ITEM NO. PART NUMBER Notes DESCRIPTION QTY. 08-GN- Grease Nipple /" UNF 0-HT- Washer High Tensile /" 0-PINC0 A Cotter Pin M x 0 080-K0 A Heavy Duty Coil Spring mm 080-KE007- A Clevis Pin mm x 7mm 080-KE080- B Tensioner Cup - Male 7 080-KE080- D Female Spring Locator 8 080-PCHTA-B B Chain Tension Rod." tpi 9 080-PCHTA-N B ACME Lock Nut / - NA - G 0 080-PCHTA-SB B Steel Spring Retaining Bush 080-PCHTABC B Tension Assembly Body with Clevis 080-XK9S A 0mm Compression Spring 080-PCHTA Chain Tension Linkage Set (items,,,,8,9,0,) Notes: Used on rear chain tension 0-0' machines only Used in all other areas 9 0 7 8 080-PCHTAA Chain Tension Assembly All(00)- A.

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0-MB 0DX ID x 0mm DX Bush 08-GN-8 Grease Nipple /8" BSP Deg 0-00 ST M0 x 0 grade 0.9 ZP Short Thread Bolt 7 0-070 M0 x 70 grade 8.8 ZP Bolt 0-0 M x 0 grade 8.8 zp Bolt 0-NYL0 Nyloc Nut M0 8 7 0-NYL Nyloc Nut M 8 07-SH79880.7"R Tonne 8 on 8" PCH Hub and Stub Complete 9 07-.0-70-8TR.0/70-8 Tyre On 8 on 8" PCD Rim 0 080-KE080- Tensioner Cup - Male 080-KE080- Female Spring Locator 080-PCDCS Tie Plate Bush ITEM NO. PART NUMBER DESCRIPTION QTY. 080-PS mm Drop leg Spacer 080-PS0 0mm Drop Leg Spacer 080-DCTP-0 Disc Chain Tie Plate Link 0mm 080-PCHB 0mm Bolt Swivel Unit 7 080-PCHTA-S Short Chain Tension Adjustor 8 080-PCHTAA Chain Tension Assembly 9 080- LH Drop Leg 0mm Clevis 0 080- RH Drop leg 0mm Clevis 080- LH Chain Adjusting Lug 080-7 RH Chain Adjusting Lug 08-07D ' LH Dual Wheel Outer Wing 7 8 8 9 0 7 0 9 08-07DA ' DW RH Outer Wing Assembly E-0

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0--8X A Roll Pin Zinc Plated /8" x " 9 080-CL C CL-B Chain Disc Link 9 080-W A W/ Chain Link 8 080-R00 A R00 Chain Link 080-PCH A Prickle Chain Link 89 080--FL&R ' Front Chain

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0--8X A Roll Pin Zinc Plated /8" x " 9 080-CL C CL-B Chain Disc Link 9 080-W A W/ Chain Link 8 080-R00 A R00 Chain Link 77 080-PCH A Prickle Chain Link 07 080--RHR ' Right Hand Rear Chain

Section ITEM NO. PART NUMBER DESCRIPTION QTY. 0--8X A Roll Pin Zinc Plated /8" x " 7 080-CL C CL-B Chain Disc Link 7 080-W A W/ Chain Link 080-R00 A R00 Chain Link 080-PCH A Prickle Chain Link 080--MOD 0-' Module Chain

Section 7 Appendix 7

0-900 /" BSPP 0 micron inline filter max flow 0L/M & 000psi max pressure 0-S7-08 /"BSPP O Ring Male - /"JIC Female Adaptor 0-S7-08 /"BSPP O Ring Male - /"JIC Male Adaptor 0-S- /"JIC Male - /"JIC Female 90 Elbow 0-S9- /"JIC Male - /"UNO Male 90 Elbow 0-S90- /"JIC Male - /"UNO Male Adaptor 0-S9- /"JIC Male Tee 0-S7- /"JIC Male - /"JIC Female - /"JIC Male Tee 0-S88- /"JIC Male - /"UNO Male Elbow 0-S9- /"JIC Male - /"JIC Female - /"UNO Male Tee 0-S8- /"JIC Male - /"JIC Female - /"JIC Female Tee 0-R9-08M /" BSPP Quick Release Ball Coupling 0-S- /"JIC Male - /"UNO Male Extended 90 Elbow Hydraulic Fittings Parts Information A 7.

Core wire @.m PLACES 0-LED0AM LED Indicator Lamp Core wire @.m Ground LH Turn PLACES 0-0RG 0RM Rubber Grommet Yellow Core wire @.m Core wire @.m Yellow LH Turn White Ground PLACES 0-0RMLP LED0RM Loom Plug 0-CCW Pin Connector Core wire @.8m White Brown Green Core wire @.m Core wire @.m Core wire @.9m PLACES 0-LED0RM LED Stop Tail Lamp LH Turn RH Turn Tail Tail Ground Ground Yellow White Brown Green Yellow White Brown Green Ground RH Turn White Ground Green RH Turn Yellow D White C Brown B Green A 0-89 Heavy Duty Metal 7 Pin Plug Core wire @.m Core wire @.m 080-USLK US ' Light Kit B 7.

: Un screw Collar from housing (anti clockwise) : Remove shaft and washer from Collar : Grind away tack welds on housing : Grind away tack welds on cover washer : Remove bearings from shaft and seal from collar : Install new bearings on shaft and new seal in collar 8: Screw on collar and re tack weld 9: Install washer and tack weld 7: Install shaft and bearings back into housing Note: 080-PCHB only requires x Bearings Section View 0-TC88 (TC Seal mm x 80mm x 8mm) 0- (Bearing RS) 080-PCHB (0,0,') 080-PCHB (0,0,') Rebuild instructions for Kelly Diamond Harrow swivels All A 7.

ITEM NO. PART NUMBER QTY. Unit 080-KEU 0800-0. mm Shaft mm 0 x Stainless Steel Hollow Bar mm 0800-9. 080-DLR-00 Drop Leg Rebuild Kit 0/0/" A 7.

PART NUMBER DESCRIPTION NOTES QTY. 0-SWB mm Ball Joint Used on Rear A-Frames and Rear Tails PART NUMBER DESCRIPTION NOTES QTY. 0-SWB8 Swivel Ball 8.mm Used on Drawbars.90. 0-SWB mm Ball Joint 0-SWB8 Swivel Ball 8.mm. 8. Swivel Ball Joints Swivel Ball Joint part numbers A 7.

Notes

KEPAM Issue B 0/0/7