9 kw 1 t Mobile telescopic crane m Tier IV emission standards
Advanced. The E-Series What makes up the E-Series 197: TX telescopic crane Over 5 years of experience in construction and building of highly specialized telescopic cranes Uncompromisingly high performance in all areas Technology that can be mastered: High-quality components without over-engineering Long service life and high value stability Your top benefits: 1 3 5 7 Green Efficiency Save fuel reduce operating costs Work quietly protect operator and environment Peak performance Robust boom system work on an incline of up to Maximum usability MultiCab work in comfort SENCON work program selection made easy Flexibility in service Operate under full load less space required Strong undercarriage traction good off-road capability Easy transport Mobile undercarriage with outrigger ready to go in no time No ballast support Maintenance and service made easy SENNEBOGEN control system easy error diagnostics Simple maintenance clear labeling Consultation and support in your area 3 production sites subsidiaries 13 sales partners over 35 service stations
3
Technical data, equipment MACHINE TYPE Model (type) 13 Model ENGINE Cooling Diesel filter Air filter Fuel tank DEF tank Electr. system Batteries Options Design FPT N5, 9 kw / 5 hp at, rpm Compliant with Tier f emission standards FPT N5, 9 kw / 5 hp at, rpm Compliant with Tier 3a emission standards Direct injection, turbo-charged, charge air cooling, reduced emissions Water-cooled With water separator and heating system Dry filter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator l 3 l V x 155 AH Low temperature package with engine preheating and heated diesel filter for temperatures below - C Electric diesel fuel pump UPPERCARRIAGE Electrical system Cooling system Safety Options Torsion-resistant box design, precision-crafted, steel bushings for boom bearings. Extremely service-friendly design, longitudinal engine Central electrical distributor, battery disconnect switch 3-circuit cooling system with high cooling capacity, electronically regulated fan drive for water, charge air and oil cooler Rearview and right sideview cameras, LED lighting package Additional LED headlights Up to additional cameras Maritime climate varnishing as corrosion protection Low temperature package Automatic central lubrication for boom pivot point, luffing cylinder, slewing ring track and winch drum bearing Pinion tooth lubrication for slewing ring Gearbox HYDRAULIC SYSTEM Pump unit mounted directly on diesel engine. Load sensing/ LUDV hydraulic system, electrohydraulic pilot-controlled work functions, load limit sensing control Pump type Axial piston variable displacement pump. The independent, proportional allocation of the pump quantity allows several work functions to be controlled with precision simultaneously and independently from one another Pump control Zero-stroke control, speed-dependent adjustment of drive pump and axial piston regulator. Auxiliary functions via gear wheel pump. Operating max. 33 bar pressure Filtration High-performance filtration with long change interval Hydraulic tank 1 l Control system Safety Options SLEWING DRIVE Slewing gear brake Slewing ring Slewing speed Extremely smooth, automotive handling. Preselection using direction switch, inching braking pedal. Servo joystick operation for work movements. Hydraulic circuits secured with safety valves. Pipe fracture safety valve for luffing and telescoping cylinders Bio-oil environmentally friendly SENNEBOGEN HydroClean 3 µm hydraulic microfilter Hydraulic tank preheater Compact planetary gear with hydraulic and electric rotor, integrated brake valves Spring-loaded disk brake, pedal for individual braking Oversized slewing ring, sealed. Highly precise, powerful slewing function. rpm, variable Subject to change. Additional options available upon request.
Technical data, equipment CAB Cab type Cab equipment Options Design ATTACHMENTS Telescopic boom Hoisting winch MultiCab, can be elevated 1.75 m Hydraulically elevating cab as standard. Flexibly mounted comfortable cab with super sound insulation. All-weather design, all-round glazing in safety glass and large roof window, adjustable windshield. Flexibly mounted comfortable seat, adjustable according to weight and shock-absorbent. Dashboard overview with swiveling steering column. Variable, controllable cab heating with air circulation stage and particle filter, automatic climate control Auxiliary heating system with timer Protective roof grating FOPS protective roof grating Radio with CD player Radio with USB and SD connection, MP3 and Bluetooth function Decades of experience and the latest computer simulations guarantee maximum stability and service life. 3-part with pulley head, hydraulic telescoping. Slant-axis hydraulic motor drive with compact planetary gear, 35 kn traction, 95 m/min. cable speed, mm cable diameter. UNDERCARRIAGE Design Stable welded construction, torsion-resistant and precision-crafted. Integrated -point outrigger with single actuation Drive All-wheel drive and all-wheel steering. Travel drive via -stage power shift transmission, pendulum axle cylinder with automatic and manual switching, strong traction and driving dynamics Parking brake -circuit servo braking system and safety parking brake Traveling gear Tires: x.- Speed km/h terrain level km/h with German motor vehicle regulations approval Mass OPERATING WEIGHT Approx. 19,7 kg With 1. m telescopic boom, 5 m fly boom,.5 t hook. Operating weight varies by model. Safety brake Crane safety Cylinders Options Spring-loaded disk brake Next-generation load moment monitoring, straightforward panel displaying all important data through SENCON display, lifting limit switch, cable exit protection, pressure relief valves and pipe fracture safety device with Eventrecorder Hydraulic cylinders with high-quality sealing and guide elements 5 m fly boom with swing-away jib, extremely fast and easy setup without auxiliary devices, locked on basic boom when not in use Subject to change. Additional options available upon request. 5
Crane equipment 1. m main boom (HA) 1 1 3 5 7 1,m 1,m 13,m,3m 7,5m Notes: 1. The specified load ratings apply when the machine is standing level and firm.. Load ratings are specified in tons and apply to a 3 slewing angle. The load ratings apply to the 13 M with deployed outriggers; the load ratings in brackets ( ) apply to free-standing mode 3. The load ratings take into account the standards DIN 1519. and ISO 35. The weight of the load handling devices (e.g. hook, suspension gear) must be subtracted from the load ratings. 5. Load ratings must be limited or reduced when conditions are unfavorable, such as soft or uneven ground, slopes, wind, lateral loads, swinging loads, jerking or sudden stopping of load, operator inexperience, driving with load.. Permissible rope winch per strand in crane mode for cable diameter mm 3,5 kg 7. Load ratings indicated with * apply only in the case of special equipment.. The specified load ratings are guidelines only. The currently valid load ratings can be found in the tables in the operating manual. [m] 1 1 1. m main boom (HA) Boom length [m] Outreach [m] 7.5.3 13. 1 1.. 15. (.) 3. 13.3 (.3). (.).. (5.3). (5.3). (5.) 5..5 (3.7). (3.). (3.). (3.9) 5.5 7.5 (3.) 7. (3.) 7. (3.). (3.).5 (3.). 5.7 (.9) /. m.7 (.9).7 (.9) 5.9 (.9).5 (.9) 7. 5. (.3) 5.3 (.3) 5. (.3).5 (.3).. (1.).3 (1.).3 (1.).1 (1.9) 9. 3. (1.5) /. m 3.5 (1.5) 3. (1.5) 3. (1.5). 3. (1.) 3. (1.) 3. (1.) 11.. (1.). (1.). (1.).. (.9) / 11. m. (.).3 (.) 13.. (.7). (.7). 1.7 (.) 1.7 (.) 15. 1. (-) /. m 1.5 1. Table no.: 13M1./75//.1/., boom (deployed outriggers) Table no.: 13M1./75//.1/., boom (free-standing) 1.3 17. 1.1 / 17.3 m Subject to change.
Crane equipment. m main boom (HA) 1 5 7,m 1,5m 3,m,1m [m]. m main boom (HA) Boom length [m] Outreach [m].1..3.5.. 1. (.) 13. (.) 3. 13.5 (.3) 13. (.3) 11. (.).. (5.3).9 (5.).5 (5.).3 (5.).5 (5.).5 9. (.) 9. (.) 9. (.) 7. (.).3 (.) 5..7 (3.9).7 (3.9) 7. (3.9).1 (3.9).. (.9). (3.).3 (3.) 5.3 (3.) 7. 5.1 (.5) /.7 m 5.3 (.) 5. (.). (.)..3 (1.9). (1.9).1 (.) 9..7 (1.) /. m 3.7 (1.) 3.7 (1.). 3.1 (1.3) 3.1 (1.) 11..7 (1.1) /.9 m.7 (1.1). Table no.: 13M-./75//.1/., boom (deployed outriggers) Table no.: 13M-./75/9/.1/., boom (free-standing).3 (1.) 13..1 (.) Hook Capacity Weight Cable reeving and maximum load rating 5 3 1 17.5 t (-pulley) 1 kg 17,5 kg, kg,5 kg 7, kg 3,5 kg for main boom.5 t (1-pulley) kg,5 kg 7, kg 3,5 kg for main boom t kg 5, kg for fly boom Subject to change. See page for notes on load lift charts. 7
5. m fly boom (SA) Crane equipment 5 7 1,m 1 1 3 13,m 1. m HA 5. m SA [m] 1 1 Outreach [m] Telescopic boom length [m] 7.5.3 13. 1. 1. 5 5 5 5 5. 3. (3.). (.) 5. 3.3 (3.3) 3. (3.). (.)..9 (.9). (.) 3. (3.1) 3. (3.) 3. (3.) 7..5 (.5) 1.9 (1.9) 3.1 (.). (.) 3. (.) 3.5 (.3).7 (.3).. (.1) 1.9 (1.9). (.). (.) 3.1 (1.9). (1.9) 3. (1.9).7 (1.) 9.. (1.7) 1. (1.7).5 (1.) 1.9 (1.). (1.5). (1.5).9 (1.5) 1.9 (1.5). (1.5). 1.9 (1.). (1.3) 1.9 (1.3).5 (1.3) 1.9 (1.3). (1.) 1.9 (1.). (1.) 1.9 (1.) 11.. (1.1) 1. (1.1).3 (1.) 1.9 (1.). (1.) 1.9 (1.). (.9) 1.9 (.9). 1. (.9). (.) 1. (.). (.) 1.9 (.). (.) 1.9 (.) 13. 1. (.7). (.7) 1. (.7). (.) 1. (.) 1.9 (.) 1. (.). 1.7 (.) 1.7 (.5) 1.7 (.5) 1.7 1.7 15. 1.5 1.5 1.5 1. 1. 1. 1. 1.3 1.3 1.3 17. 1.1 1.1 1. 1. 1. 19. Table no.: 13M-1./75//.1/.SA5.9. Table no.: 13M-1./75/9/.1/.SA5.7 Subject to change. See page for notes on load lift charts.
5. m fly boom (SA) Crane equipment 5 1 1 3,m,3m,1m. m HA 5. m SA [m] 1 1 Outreach [m] 3.. (.) Telescopic boom length [m].1..3.5. 5 5 5 5 5. 3.5 (3.5). (.) 5. 3. (3.) 3.5 (3.5) 3.7 (3.7). (.).. (.) 1.9 (1.9) 3. (3.). (.) 3. (3.1) 3. (3.) 3.5 (3.) 7.. (.) 1.9 (1.9).7 (.5). (.) 3. (.). (.) 3.3 (.) 3. (.). 1.9 (1.9) 1. (1.). (.) 1.9 (1.9).7 (.). (.) 3. (1.9). (1.9) 3. (1.9) 9. 1. (1.7).1 (1.7) 1. (1.7).5 (1.) 1.9 (1.). (1.) 1.9 (1.).7 (1.). (1.). 1.9 (1.). (1.3) 1.9 (1.3).5 (1.3) 1.9 (1.3).5 (1.3) 1.9 (1.3) 11. 1. (1.). (1.1) 1. (1.1).3 (1.1) 1.9 (1.1). (1.1) 1.9 (1.1). 1. (.9). (.9) 1. (.9). (.9) 1.9 (.9) 13. 1. (.) 1.9 (.) 1.9 (.7) 1. (.7). 1.7 (.) 1. (.) 1. (.) 15. Table no.: 13M-./75//.1/.SA5 1. (.5) 1. (.5) 1. Table no.: 13M-./75/9/.1/.SA5 1. Subject to change. See page for notes on load lift charts. 9
Grab equipment 1. m main boom (HA) 1 1 clamshell equipment Notes: 1. The specified load ratings apply when the machine is standing level and firm.. Load ratings are specified in tons and apply to a 3 slewing angle. The load ratings apply to the 13 M with deployed outriggers; the load ratings in brackets ( ) apply to free-standing mode 3. The load ratings take into account the standards DIN 1519. and ISO 35 [m] 1 1 1 Boom length [m] Outreach [m] 7.5.3 13. 1...7 3. 11.3.5. 9..5. 5. 7. 7.3. 5.1 5.5.3..3 5.1. 5.7 5.7 5. 7...5.. 3.5 3. 3. 9. 3. 3...5.5 11.... 1. 13. 1.7. 1. 15. 1. Subject to change.
Work platform Work platform 1. m HA 5 7 The permitted load capacity for the work platform is 35 kg: persons of kg each + 19 kg additional load. 1 1,m 1 3 13,m 7,5m [m] 1 - - 5 7 Work platform. m HA 1 1,m The permitted load capacity for the work platform is 35 kg: persons of kg each + 19 kg additional load. 3,3m,1m [m] 1 - Subject to change. 11
Lift fork equipment 7.5 1. m lift fork 5 7 Notes: 1. The specified load ratings apply when the machine is standing level and firm. Load ratings are specified in tons and apply to a 3 slewing angle. 3. The load ratings take into account the standards DIN 1519. and ISO 35.. The load ratings apply to loads placed in the center of the lift fork with a center of gravity that is 5 mm from the fork carriage. 5. Load ratings must be limited or reduced when conditions are unfavorable, such as soft or uneven ground, slopes, wind, lateral loads, swinging loads, jerking or sudden stopping of load, operator inexperience, driving with load. The load ratings apply when the outriggers are deployed. 7. The load ratings in brackets ( ) apply to free-standing operation.. The specified load ratings are guidelines only. The currently valid load ratings can be found in the tables in the operating manual. 1 1 3 1,m 13,m 7,5m [m] 1 7.5 1. m lift fork - - Boom length [m] Outreach [m] 7.5.3 13. 1 1...5 (1.53) 3..5 (1.53) 1.3 (.3)..5 (1.53) 1.3 (.3).9.5.5 (1.53) 1.3 (.3).9. 5..5 (1.53) 1.3 (.3).9..5..5 (1.53) 1.3 (.3).9..5 7..5 (1.53) 1.3 (.3).9..5..5/7.5 (1.53)/7.5 1.3 (.3).9..5 9. 1.3 (.3).9..5. 1.3 (.3).9..5 11. 1.3/.3 (.3)/.3.9..5..9..5 13..9/13...5...5 15...5 1...5 17..5 1. Table no.: 13M-1./75/(9)/.1/..5/1. I % 5% 5% 75% % II % 5% 5% 75% % Subject to change.
Lift fork equipment.1. m lift fork 5 7 1 1,m 3,3m [m] 1.1. m lift fork - Boom length [m] Outreach [m].1..3.5.. 3. (.) 3. 3. (.) 1. (1.). 3. (.) 1. (1.) 1. (.7).5 3. (.) 1. (1.) 1. (.7) 1. (.37) 5. 3. (.) 1. (1.) 1. (.7) 1. (.37).. 3. (.) 1. (1.) 1. (.7) 1. (.37). 7. 1. (1.) 1. (.7) 1. (.37).. 1. (1.) 1. (.7) 1. (.37). 9. 1./. (1.) /. 1. (.7) 1. (.37).. 1. (.7) 1. (.37). 11. 1./.3 (.7)/.3 1. (.37).. 1. (.37). 13. 1./.5 (.37)/.5... 15../. 1. 17. 1. Table no.: 13M-./75/(9)/.1/. I % 5% 5% 75% % II % 5% 5% 75% % Subject to change. See page for notes on load lift charts. 13
PRELIMINARY Transport dimensions 9 195 (Ausleger / boom 1,m) 795 (Ausleger / boom,m) 199 317 3. 3 Lenkungs 5 3 steering mo 1 55 35 55 13 with mobile undercarriage 3 Lenkungsarten 3 steering modes Wendekreis turning radius Turning radius 3 (Ausleger / boom 1,m) 33 (Ausleger / boom,m) 3 Lenkungsarten 3 steering modes,3 m turning radius 7 7.3 3959 3 steering modes 5 R5 175 Wendekreis 5 3 Lenkungsarten R 5 R 5 R5 Wendekreis turning radius Wendekreis turning radius 13 with mobile undercarriage 5 R Subject to change. 5 5 R5 R 5 R5 Dimensions in [mm]
Attachments 5 m fly boom 5 5 55 Hydraulic grapple with teeth and drainage holes 155 Weight Capacity kg liters 75 Work platform 53 Lift fork attachment 195 3 137 Subject to change. Dimensions in [mm] 15
1 PRELIMINARY
The 13 E Mobile optimizes construction site logistics during the process of completing a detached house in Germany. The 13 E Mobile being used for lifting activities and logistics tasks at a railway construction site 17
Notes 1
Notes 19
This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machines supplied by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment. All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners. Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants offered. Requested performance characteristics are only binding if they are expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. SENNEBOGEN Maschinenfabrik GmbH Sennebogenstraße 9315 Straubing, Germany Tel. +9 91 5-/ Fax +9 91 3 marketing@sennebogen.de Order no. 9917 13M-R-E-1715 www.sennebogen.com