C Specifications WT 00 Series Rider Pallet Truck WT 00 Series
C WT 00 Series Rider Pallet Truck WT 20-2.0 foldable platform mechanical steering a 459 240 520 4.20 WT 40-2.0 foldable platform electronic or mechanical steering 13 1055 a 459 240 520 4.20
WT 00 Series Rider Pallet Truck WT 40-2.0 rear entry fixed platform electronic or mechanical steering mechanic 5 a electronic 735 440 4.20 WT 40-2.0 side entry fixed platform electronic steering 16 1381 502 a 519 815 4.20
WT 00 Series Specifications Misc. Motors Performance Dimensions Tyres Weights General Information 1.1 Manufacturer Crown Equipment Corporation WT 20-2.0 WT 40-2.0 1.2 Model steering type mechanical electric platform type foldable foldable rear entry foldable rear entry side entry 1.3 Power electric 1.4 Operator Type stand-on 1.5 Load Capacity t 2.0 Load Centre c mm see table 1 see table 2 Load Distance raised x mm see table 1 see table 2 Wheel Base raised y mm see table 1 see table 2 2.1 Weight less battery kg see table 1 see table 2 2.2 w. load front/rear kg see table 1 see table 2 2.3 Axle Load w.o. load front/rear kg see table 1 see table 2 3.1 Tyre Type Vulkollan 3.2 front mm Ø 2 x 70 Ø 2 x 70 Ø 250 x 75 3.3 Wheel Size rear mm Ø 82 x 110 3.4 Additional Wheels castor wheel***** Ø x 50 3.5 Wheels no. (x=driven) front/rear mm 1x + 2/2 3.6 front b10 mm 512 3.7 Track Width rear b11 mm 350 / 370 / 390 / 500 4.4 Lift Height h3 mm Operator Stand Height h7 mm 186 186 197 186 197 197 Tiller Arm Height in drive position min./max. h14 mm 1056/1359 1056/1359 1054/1323 1056/1359 1249 1249 4.15 Fork Height lowered h13 mm Overall Length raised l1 mm see table 1 see table 2 4.20 Headlength raised l2 mm see table 1 see table 2 Overall Width b1 mm 740 Fork Dimension thxwxl mm 78 x 170 x 1150 a Fork Tip Length mm see table 1 see table 2 Width Across Forks b5 mm see table 1 see table 2 4.32 Ground Clearance centre wheelbase m2 mm 4.33 Working Aisle Width* 0x1200 traverse, raised Ast mm 18/2316 1967/2392 1967/2392 4.34 Working Aisle Width** 800x1200 length, raised Ast mm 20/2516 2167/2592 2626 2167/2592 2626 2718 Turning Radius raised Wa mm see table 1 see table 2 5.1 Travel Speed w./w.o. load km/h 6.0 / 6.0 7.5 / 10.5 10.0 / 12.5 5.2 Lift Speed w./w.o. load m/s 0.04 / 0.06 5.3 Lowering Speed w./w.o. load m/s 0.05 / 0.05 5.8 Max. Gradeability w./w.o. load 5 min. rating % 10 / 25 9 / 25 5.10 Service Brake electric 6.1 Traction Motor rating at S2 60 min. kw 2.0 2.5 6.2 Lift Motor*** rating at S3 15 % kw 1.1 1.1 (2.2) 6.3 Battery acc. to DIN 43535 B Max. Battery Box Size**** lxwxh mm 212x624x627 284 x 624 x 627 (288 x 628 x 784) 6.4 Battery Voltage**** nominal capacity K5 V/Ah 24 / 240 24 / 375 (460) 6.5 Battery Weight**** kg 212 9 (418) 8.1 Type of Controller drive AC-transistor 8.4 Sound Level acc. to EN 12053 db(a) 70 ***** Ast calculation based on standard truck configuration with 0 mm fork length and 368 mm fork tip length, platform up/down ***** Ast calculation based on standard truck configuration with 1150 mm fork length and 368 mm fork tip length, platform up/down or fixed platform ***** With fork lengths 1600 mm use values in brackets ***** With optional larger battery compartment use values in brackets ***** WT 20 castor wheels are fixed type
WT 00 Series Specifications WT 20-2.0 Table 1 Table 2 foldable platform Load Centre c mm 500 600 600 Load Distance 1 x mm 740 890 940 Wheel Base 2 4 y mm 1193 1343 1393 2.1 Weight less battery kg 551 556 558 2.2 Axle Load w. load 2.3 Axle Load w.o. load kg 1024 1121 1128 kg 1751 1658 1653 kg 623 637 641 kg 151 142 140 platform up l1 mm 1693 1843 1893 Overall Length 3 4 platform down l1 mm 2152 22 2352 platform up l2 mm 693 4.20 Head Length 3 4 platform down l2 mm 1152 Fork Dimension th x w mm 78 x 170 Fork Length l mm 0 1150 1200 a Fork Tip Length mm 368 Width Across Forks b5 mm 520/540/560/670 platform up Wa mm 1467 1617 1667 Turning Radius 2 4 platform down Wa mm 1893 2043 2093 Table 2 rear entry platform WT 40-2.0 foldable platform 500 600 600 700 800 900 0 1 1200 740 890 940 1140 1340 1540 1740 1890 2140 1269 1419 1469 1669 1869 2069 2269 2419 2669 576 581 583 589 619 631 643 655 671 10 1139 1198 1280 1358 1414 1461 1472 1538 1809 1767 1709 1633 15 1542 1507 1507 1457 715 732 737 754 781 796 809 820 834 186 174 171 159 162 159 158 160 161 1769 19 1969 2169 2369 2569 2769 29 3169 2228 2378 2428 2628 2828 28 3228 3378 3628 769 1228 78 x 170 0 1150 1200 1400 1600 1800 2000 2150 2400 368 520 / 540 / 560 / 670 1543 1693 1743 1943 2143 2343 2543 2693 2943 1969 2119 2169 2369 2569 2769 2969 3119 3369 WT 40-2.0 side entry platform Load Centre c mm 600 600 700 800 900 0 1 1200 600 600 700 800 900 0 1 1200 Load Distance 1 x mm 890 940 1140 1340 1540 1740 1890 2140 890 940 1140 1340 1540 1740 1890 2140 Wheel Base 2 4 y mm 1419 1469 1669 1869 2069 2269 2419 2669 1419 1469 1669 1869 2069 2269 2419 2669 Overall Length 3 4 l1 mm 2413 2463 2663 2863 63 3263 3413 3663 2494 2544 2744 2944 3144 3344 3494 3744 4.20 Head Length 3 4 l2 mm 1263 1344 Fork Dimension th x w mm 78 x 170 Fork Length l mm 1150 1200 1400 1600 1800 2000 2150 2400 1150 1200 1400 1600 1800 2000 2150 2400 a Fork Tip Length mm 368 Width Across Forks b5 mm 520 / 540 / 560 / 670 Turning Radius 2 4 Wa mm 2152 2202 2402 2602 2802 02 3152 3402 2244 2294 2494 2694 2894 94 3244 3494 Table 3 foldable platform WT 60-2.5 rear entry platform Load Centre c mm 500 600 600 700 800 0 1200 1200 1200 600 600 700 800 0 1200 1200 1200 Load Distance 1 x mm 748 898 948 1148 1348 1748 1815 1778 1564 898 948 1148 1348 1748 1815 1778 1564 Wheel Base 2 4 y mm 1277 1427 1477 1677 1877 2277 2344 27 2093 1427 1477 1677 1877 2277 2344 27 2093 2.1 Weight less battery kg 656 668 671 687 701 7 752 751 745 724 727 743 757 786 808 807 801 2.2 Axle Load w. load front kg 12 1355 1426 1522 1600 1717 1553 1520 1312 1432 1503 1597 1672 1787 1622 1590 1383 rear kg 2179 2138 2069 1989 1925 1837 2024 2055 2257 2116 2049 1971 1909 1824 2011 2042 2242 2.3 Axle Load w.o. load front kg 783 803 808 829 847 877 879 876 7 880 8 904 920 947 948 945 928 rear kg 197 190 187 182 178 177 198 200 212 168 166 164 162 164 1 187 197 platform up l1 mm 1769 19 1969 2169 2369 2769 3169 3169 3169 Overall Length 3 4 2413 2463 2663 2863 3263 3663 3663 3663 platform down l1 mm 2228 2378 2428 2628 2828 3228 3628 3628 3628 platform up l2 mm 769 4.20 Head Length 3 4 1263 platform down l2 mm 1228 Fork Dimension th x w mm 78 x 180 Fork Length l mm 0 1150 1200 1400 1600 2000 2400 2400 2400 1150 1200 1400 1600 2000 2400 2400 2400 a Fork Tip Length mm 360 360 360 360 360 360 693* 7** 944** 360 360 360 360 360 693* 7** 944** Width Across Forks b5 mm 520 / 540 / 680 Turning Radius 2 4 platform up Wa mm 1551 1701 1751 1951 2151 2551 2618 2581 2367 2160 2210 2410 2610 10 77 40 2826 platform down Wa mm 1977 2127 2177 2377 2577 2977 44 07 2793 1 Forks lowered +40 mm 2 Forks lowered +58 mm front rear front rear 2.1 Weight less battery kg 637 639 645 675 687 699 711 727 873 875 881 1 923 935 947 963 2.2 Axle Load w. load front kg 1215 1274 1353 14 1484 1529 1540 1605 1468 1526 1603 1679 1731 1776 1786 10 rear kg 1746 1690 1616 1570 1528 1494 1495 1447 17 1673 1602 1557 1516 1483 14 1437 2.3 Axle Load w.o. load front kg 808 812 827 3 866 878 888 901 1060 1064 1077 1102 1114 1 1134 1147 rear kg 154 151 142 147 145 145 148 150 137 135 128 134 133 134 137 141 3 Forks lowered -18 mm 4 With optional battery roll out (40/60) +57 mm ** Only with single load wheels ** Only with tandem load wheels
C WT 00 Series Rider Pallet Truck WT 60-2.5 foldable platform electronic steering 1055 a 459 240 520 4.20 WT 60-2.5 rear entry fixed platform electronic steering 5 a 735 440 4.20
WT 00 Series Specifications Misc. Motors Performance Dimensions Tyres Weights General Information 1.1 Manufacturer Crown Equipment Corporation WT 60-2.5 1.2 Model steering type electric platform type foldable rear entry 1.3 Power electric 1.4 Operator Type stand-on 1.5 Load Capacity t 2.5 Load Centre c mm see table 3 Load Distance raised x mm see table 3 Wheel Base raised y mm see table 3 2.1 Weight less battery kg see table 3 2.2 w. load front/rear kg see table 3 Axle Load 2.3 w.o. load front/rear kg see table 3 3.1 Tyre Type Vulkollan 3.2 front mm Ø 250 x 75 Wheel Size 3.3 rear mm Ø 82 x 110 3.4 Additional Wheels castor wheel Ø x 50 3.5 Wheels no. (x=driven) front/rear mm 1x + 2/2 3.6 front b10 mm 512 Track Width 3.7 rear b11 mm 350 / 370 / 500 4.4 Lift Height h3 mm Operator Stand Height h7 mm 186 197 Tiller Arm Height in drive position min./max. h14 mm 1056 / 1359 1249 4.15 Fork Height lowered h13 mm Overall Length raised l1 mm see table 3 4.20 Headlength raised l2 mm see table 3 Overall Width b1 mm 740 Fork Dimension thxwxl mm 78 x 180 x 1150 a Fork Tip Length mm see table 3 Width Across Forks b5 mm see table 3 4.32 Ground Clearance centre wheelbase m2 mm 4.33 Working Aisle Width* 0x1200 traverse, raised Ast mm 1967 / 2392 4.34 Working Aisle Width** 800x1200 length, raised Ast mm 2167 / 2592 2626 Turning Radius raised Wa mm see table 3 5.1 Travel Speed w./w.o. load km/h 9.0 / 12.5 5.2 Lift Speed w./w.o. load m/s 0.04 / 0.06 5.3 Lowering Speed w./w.o. load m/s 0.05 / 0.05 5.8 Max. Gradeability w./w.o. load 5 min. rating % 8 / 25 5.10 Service Brake electric 6.1 Traction Motor rating at S2 60 min. kw 2.5 6.2 Lift Motor rating at S3 15 % kw 2.2 6.3 Battery acc. to DIN 43535 B Max. Battery Box Size*** lxwxh mm 284 x 624 x 627 (288 x 628 x 784) 6.4 Battery Voltage*** nominal capacity K5 V/Ah 24 / 375 (460) 6.5 Battery Weight*** kg 9 (418) 8.1 Type of Controller drive AC-transistor 8.4 Sound Level acc. to EN 12053 db(a) 70 *** Ast calculation based on standard truck configuration with 0 mm fork length and 368 mm fork tip length, platform up/down *** Ast calculation based on standard truck configuration with 1150 mm fork length and 360 mm fork tip length, platform up/down or fixed platform *** With optional larger battery compartment use values in brackets
WT 00 Series Technical Information Capacity WT 20-2000 kg WT 40-2000 kg WT 60-2500 kg Electric System / Batteries 24-volt electrical system with nominal battery capacities from 240 Ah to 460 Ah. The battery can be removed vertically or horizontally with optional battery compartment rollers. Standard Equipment 1. Maintenance free 3-phase (AC) traction and steering motors 2. e-gen Braking System offers regenerative and frictionless electric braking. Mechanical braking applies only as parking brake 3. The X10 Control Handle places all truck functions at the operator s fingertips. 4. Crown Access 1 2 3 Comprehensive System Control LCD display Keyless start up with PIN code Start up and run time diagnostics Battery discharge indicator and lift interrupt 3 selectable traction performance profiles (WT 40, WT 60) Hour meters for monitoring various truck operating components Onboard diagnostics with real time troubleshooting capabilities 5. FlexRide reduces vibrations and shocks to a minimum by combining (foldable platform) Soft floor mat with integrated presence sensor Advanced platform suspension Fully suspended drive unit Heavy-duty shock absorbing castors (WT 40, WT 60) 6. CAN-Bus technology 7. Sealed electrical Deutsch Connectors 8. Heavy-duty side restraints with soft side pads and quick-exit feature (WT 40/60) 9. Electric power disconnect switch 10. Vulkollan drive tyre, castor wheels and load wheels 11. Single load wheels 12. Ramp hold 13. Battery connector DIN 160 A 14. Heavy-duty reinforced fork assembly 15. Heavy-duty chassis with 10 mm thick steel skirt 16. Easily removable steel covers 17. Hinged steel top battery cover for easy battery access 18. Intelligent Electronic Steering System (WT 60) Selectable performance profiles for speed reduction on curves Tactile feedback feature analyses operational conditions and adjusts steering force for optimised control 19. Active Traction system adjusts drive tyre pressure as load weight changes (WT 60) 20. Rabbit/turtle switch incorporates two levels of programmable travel performance 21. Pallet entry ramp Optional Equipment 1. Intelligent Electronic Steering System (WT 40) Selectable performance profiles for speed reduction on curves Tactile feedback feature analyses operational conditions and adjusts steering force for optimised control Active Traction system adjusts drive tyre pressure as load weight changes 2. Rear entry fixed platform (WT 40, WT60) 3. Side entry fixed platform (WT 40) 4. Weight-adjustable FlexRide (for rear entry platform) 5. Fold-down step with backrest grab bar for extended operator reach (for side entry platform) 6. Fork length and spread options 7. Battery compartment for 420-460 Ah batteries (WT 40, WT 60) 8. Battery compartment rollers (longer head length) 9. Battery connector SBE 160 red 10. Rubber or Supertrac drive tyre 11. Tandem load wheels (WT 40/60) 12. Heavy-duty fixed castor wheels, single or dual 13. Freezer conditioning and corrosion protection 14. InfoLink ready 15. 12V power supply for electronic tools 16. Key switch or key pad 17. Load backrest 18. Audible travel alarm 19. Heavy-duty side restraints with soft side pads and quick-exit feature (WT 20) 20. Work Assist accessory tube 21. Work Assist Accessories Load tray Storage pockets Beverage holder Trash bag holder Scan gun holder Small, medium and large clip boards Mounting brackets for WMS terminals 22. Special paint Electrical 24 volt electrical system managed by Crown s Access 1 2 3 Comprehensive System Control. Virtually maintenancefree AC traction motor provides strong acceleration and control at any speed. Sensors monitor functional parameters, including steering and speed, and adjusts operational settings automatically to suit conditions. Power Unit Designed to take the abuse of dock work, the rugged power unit features a reinforced 10 mm thick skirt to protect drive unit and caster components. A 12 mm skirt protects the battery and lift linkage. The contoured skirt provides greater ground clearance for working on ramps. Removable steel covers all around ensure internal components are protected against impacts yet easily accessible for service. Operator Area and Controls The WT 00 Series incorporates numerous design features to improve operator comfort and productivity. The folding FlexRide platform reduces shock transfer to the operator by more than 80 percent. Dock boards can be crossed without reducing speed. The lifetime platform suspension never requires adjustment and features solid state induction switches to avoid reliability issues caused by contaminants. Heavy-duty side restraints feature 50 mm heavy-wall steel tubing and rugged C-clamp mounting system. Soft polyurethane side pads are positioned for excellent support and comfort. The quick-exit feature (patent pending) allows the restraints to swing up for faster access to the load.
WT 00 Series Technical Information Fixed platform models feature a patented Entry Bar Safety Switch which stops the truck if the operator s foot is outside the truck perimeter. Low step height and wide, rounded access make it easy to step on and off the truck. The rearentry platform incorporates large side cushions for soft support in side-stance position. A contoured lean pad on the side entry platform provides a soft contact surface to lean against. Patented weight-adjustable FlexRide optional on the rear entry model - provides the ultimate rider comfort by tuning the suspension for the operator s body weight. The X10 control handle, designed for simultaneous operation of all functions with one hand, improves sidestance operation for maximum visibility in both driving directions. An ergonomic forward/reverse thumb wheel allows for precise manoeuvring. The hand grips are urethane covered for insulation from cold and vibration with integrated horn buttons for easy activation. A rabbit/turtle switch incorporates two levels of programmable travel performance so operators can select the setting that matches their experience level or application requirements. The low tiller pivot provides bestin-class foot clearance when operating in pedestrian mode (platform folded up). Available electronic steering improves manoeuvrability and responsiveness, even with heavy loads. An intelligent tactile feedback feature analyses operational conditions and adjusts steering force for greater driver confidence. Combined with Active Traction and speed control on curves, electronic steering safely delivers top driving performance. Access 1 2 3 Comprehensive System Control Crown s Access 1 2 3 technology provides optimum performance and control by offering a communications interface for the operator and service engineer, intelligent coordination of lift truck systems and simplified service with advanced diagnostics. The display includes a full featured on-board service tool so service engineers can actively view inputs and outputs during truck operation. No laptop or service terminal is required. Event code history, including the last 16 events, is accessible through the display. The display provides a convenient interface for operators, keeping them informed (hour meters, BDI, operator messages, service codes) of any changes impacting truck performance and allowing them to choose from three performance profiles when enabled (40/60). Performance tuning can be accessed at the display to customise truck performance for specific applications or operator requirements. In addition, up to 25 PIN codes can be assigned to individual operators and matched to one of the pre-programmed performance profiles if desired. Power Unit Suspension The drive unit suspension utilises hard-plated chrome rods and sealed slide bushings for long life without adjustment. The suspension provides 60 mm of travel with constant drive tyre pressure for excellent performance on ramps. Combined with springloaded castors, the system reduced shocks to the chassis, mounted components and the operator. Active Traction, standard on trucks with electronic steering, uses hydraulic pressure to increase traction. Reduced slipping and improved braking are especially helpful on steep or wet ramps. e-gen Braking System The power of the high-torque AC traction motor is used to stop the truck and keep it static until a travel input is requested, even when operating on a gradient. This system eliminates adjustments and wear points for a lifetime of maintenance free use. An automatic parking brake activates if the truck is stopped and the operator leaves the platform or power is disconnected. Safety Regulations Conforms to European safety standards. Dimensions and performance data given may vary due to manufacturing tolerances. Performance is based on an average size vehicle and is affected by weight, condition of truck, how it is equipped and the conditions of the operating area. Crown products and specifications are subject to change without notice.
European Manufacturing: WT 00 SPEC GB 01/10, 25 M03324-006-01 Printed in Germany DIN EN ISO 9002 C Crown Gabelstapler GmbH & Co. KG Roding, Germany www.crown.com