Fiber Termination Panels with RapidReel Technology st Edition
Table of Contents Rapid Fiber Panel Series... 5-6 Rapid Fiber Panel with MPO Connector...7 Typical Applications Central Office/Data Center...8 Wireless Connectivity...9 RU Rapid Fiber Panel with MPO...0 3 RU Rapid Fiber Panel with MPO... 4 RU Rapid Fiber Panel with MPO... 2 NGF Optical Distribution Frame... 3 NG3 Optical Distribution Frame... 3 LSX Optical Distribution Frame... 3 FDF Optical Distribution Frame... 3 FPX Series Empty Panel...4 FPX MPO Cassettes...4 Rapid Fiber Panel with Single Fiber Breakouts... 5 Typical Application Central Office/Data Center... 6 RU Rapid Fiber Panel with SFBO... 7 3 RU Rapid Fiber Panel with SFBO... 8 4 RU Rapid Fiber Panel with SFBO... 9 LSX Bracket...20 8 FDF Bracket...20 NG3 Bracket...20 Accessories TracerLight Patch Cords... 2 2 Millimeter Patch Cords... 22 Cleaning Kits... 23 3 mm 24 Fiber Zip Plenum Rated Microcable... 23 3.6 mm 2 Fiber Indoor/Outdoor Microcable...24 3
The Rapid Fiber Panel is an important innovation in the fiber optic panel market. Serving as a key distribution point between the electronic equipment and the main optical distribution frame, the Rapid Fiber Panel offers service providers unmatched savings in installation time, labor costs and performance. Rapid Fiber Panel employs TE's unique RapidReel payout system to deploy dual 2-fiber 3 mm diameter cable which means the intrafacility cable (IFC) cable is always the right length. Available in 00' increments (up to 000'), the multifiber cable terminates to a multi-fiber push-on connector (MPO), which enables a plug-and-play connection to the main distribution frame. The MPO connector and multi-fiber cable ensure fast cable routing and easy handling by technicians; and offers maximum space savings for high density fiber applications. The Rapid Fiber Panel's combination of microcable, RapidReel spooling and MPO connector technology in a single panel not only relieves cable congestion but also simplifies the ordering and inventory of equipment. The panel also features TE's industry-leading cable management providing bend radius protection, cable routing paths and physical protection for optimal network performance. Benefits Cost Savings: RapidReel technology reduces upfront deployment costs by simplifying site survey inspections, reducing labor hours and streamlining cable deployment. Speed of Deployment: Pre-connectorized, plug-and-play solution eliminates splice labor requirements and speeds network construction. Access: Technician-friendly, front-facing interface ensures trouble-free maintenance and fast service turn-ups. Simplified Ordering: All-in-one panel, microcable and slack storage solution simplifies ordering and stocking requirements. MPO Connector Single Fiber Breakout Space Savings Rack Density: Compact Low Loss MPO connector design and multi-fiber microcable is ideal for high density intrafacility applications. Excess fiber is stored within unit no additional enclosures are required. Space Savings Overhead: Each Rapid Fiber Panel cable is the equivalent of 24 fiber jumpers resulting in 70% space savings within Fiber Guide compared to.7 mm jumpers, and 85% space savings within ladder racking compared to standard IFC cable. Performance: Offers superior cable management with highly reliable connectors for uninterrupted network operation and high quality of service. Accessories 5
The Rapid fiber panel incorporates the latest panel, cable and connector technology and can help drive down total cost of installation by as much as 25%. Key features: Panel RapidReel spooling system ensures IFC cable is always the right length; available in 00' increments (up to 000') Spool assembly is equipped with a pulling eye for easy cable routing and installation Mounting brackets allow 9" or 23" rack installation RapidReel technology speeds installation requirements and lowers deployment costs Rated for indoor environments meets UL 863 and NEBS Level 3 requirements for central office applications MPO Connector Single Fiber Breakout Seamlessly integrates with plug-and-play equipment such as the NG3, NGF, LSX and FDF fiber frames Cable 2-fiber 3 mm indoor/outdoor cable terminated with a MPO connector; or 2-fiber 2mm plenum cable with fanout terminated to single fiber breakouts with SC / LC connectors GR 409 compliant, robust microcable design to fit a variety of applications and environments Reduced bend radius fiber technology provides cable protection and eliminates concerns around proper handling, slack storage, and attenuation loss from tight bends Multimode cable designed and tested to TIA 568 Connectors Low MPO and SC/LC connector insertion loss and return loss minimizes impact on link loss budget Optical connectors designed and tested to GR 326 and GR 435 Multimode connectors designed and tested to TIA 568 Accessories 6
Fiber Termination Panels with MPO Connector Mounting width: Recess options: RU (.75") 3 RU (5.25") 4 RU (7") 9-inch or 23-inch, EIA or WECO 2, 4 or 5 inches (5.08, 0.6 or 2.7 cm) Spool assemblies per panel: 3 6 Connector types available on panel: SC or LC SC or LC SC or LC Ports per spool assembly: 24 SC =24, LC=48 24 Panel port capacity: 24 SC =72, LC=44 44 Payout cable connector types: Pulling eye pull force: Singlemode or Mutimode 2-fiber female MPO connectors 40 lbs (8.4 kg) Pulling eye diameter:.072" (.83 cm) 2 pulling eyes can be pulled through a." (2.8 cm) diameter opening Compliance: UL 863, NEBS Level 3, GR 435, GR 326 and GR 409 Note: For microcable specifications, see page 23. Low-loss MPO Connector Frequency 40 20 00 80 60 40 20 MPO Insertion Loss - Singlemode 30/550 nm Any Two Randomly Mixed Pairs GR-435 0 0.00 0.05 0.0 0.5 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 Insertion Loss (db) MAXIMUM CABLE LENGTH SHIPPED ON INTERNAL SPOOL Panel Height LC (Indoor Plenum Cable) SC (Indoor Plenum Cable) RU 200 ft 200 ft 3 RU 00 ft 200 ft 4 RU 00 ft 00 ft Note: Panels ordered with longer stub lengths above will be stored on the internal spool and the difference between the length ordered and the length above will be stored on a disposable external spool. In these situations the individual shelves with internal storage will ship separately from the chassis and will need to be installed in the field. Frequency 2500 2000 500 000 500 MPO Insertion Loss -Multimode 850/300 nm Any Two Randomly Mixed Pairs GR-435 TIA-568 0 0.00 0.05 0.0 0.5 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 Insertion Loss (db) Accessories Single Fiber Breakout MPO Connector 7
Fiber Termination Panels with MPO Connector Typical Central Office/Data Center Application 4 3 2 MPO Connector Single Fiber Breakout Shown above is a rendering of a typical Rapid Fiber Panel application. Below is an interconnection diagram that details the application and also highlights some of the available frame and panel options with MPO connectivity. Active Equipment Bay 2 Rapid Fiber Panel Active Equipment Fiber Jumper Accessories Microcable with an MPO Connector 3 4 Optical Distribution Frame (ODF) Solutions Fiber Panel Solution Or NGF NG3 LSX FDF FPX 8
Fiber Termination Panels with MPO Connector Typical Wireless Connectivity Application Active Equipment RU Rapid Fiber Panel Demarcation Box Flexible Fiber Box (FFB) Backhaul Cabinet Single Fiber Breakout Accessories MPO Connector Indoor/Outdoor Cable 3.6 mm indoor/outdoor cable is used for outside plant applications. 9
Fiber Termination Panels with MPO Connector RU (.75" H) Rapid Fiber Panels Accessories Single Fiber Breakout MPO Connector Front Ordering information Description Part Number 24-position RU (.75" H); Loaded with dual 2-fiber 3 mm plenum rated cable, MPO connector on far end; chassis contains slide-in spool assembly Singlemode; Chassis color: almond* SC/UPC with singlemode reduce bend radius cable LC/UPC with singlemode reduce bend radius cable SC/APC with singlemode reduce bend radius cable Multimode 50/25 μm Laser Optimized to 300 meters (OM3); Chassis color: black SC with OM3 cable LC with OM3 cable 24-position RU (.75" H), indoor/outdoor; Loaded with dual 2-fiber 3.6 mm indoor/outdoor-rated microcable, MPO connector on far end; chassis contains slide-in spool assembly Singlemode; Chassis color: almond* SC/UPC with singlemode reduce bend radius cable LC/UPC with singlemode reduce bend radius cable SC/APC with singlemode reduce bend radius cable Multimode 50/25 μm Laser Optimized to 300 meters (OM3); Chassis color: black SC with OM3 cable LC with OM3 cable 2-position RU (.75" H), indoor/outdoor; Loaded with 2-fiber 3.6 mm indoor/outdoor-rated microcable, MPO connector on far end; chassis contains slide-in spool assembly Singlemode; Chassis color: almond* SC/UPC with singlemode reduce bend radius cable LC/UPC with singlemode reduce bend radius cable SC/APC with singlemode reduce bend radius cable Multimode 50/25 μm Laser Optimized to 300 meters (OM3); Chassis color: black SC with OM3 cable LC with OM3 cable Rear 3" of rear clearance required RCP-72PUExxx00 RCP-K2PUExxx00 RCP-J2PUExxx00 RCPB-T2PUMxxx00 RCPB-C2PUMxxx00 RCP-72DUExxx00 RCP-K2DUExxx00 RCP-J2DUExxx00 RCPB-T2DUMxxx00 RCPB-C2DUMxxx00 RCP-7DUExxx00 RCP-KDUExxx00 RCP-JDUExxx00 RCPB-TDUMxxx00 RCPB-CDUMxxx00 * Shade of putty xxx = length in feet (converted to meters); 03 = 00 ft 06 = 200 ft 092 = 300 ft 22 = 400 ft 53 = 500 ft 83 = 600 ft 24 = 700 ft 245 = 800 ft 275 = 900 ft 305 = 000 ft RU SC/LC (two MPO's per tray) 0
Fiber Termination Panels with MPO Connector 3 RU (5.25" H) Rapid Fiber Panels Front Rear 3" of rear clearance required Single Fiber Breakout 3 RU LC Only Accessories Ordering information Description Part Number 72-position 3 RU (5.25 H); Loaded with dual 2-fiber 3 mm plenum rated cable, MPO connector on far end; chassis contains 3 reels Singlemode; Chassis color: putty SC/UPC with singlemode reduce bend radius cable SC/APC with singlemode reduce bend radius cable Multimode 50/25 μm Laser Optimized to 300 meters (OM3); Chassis color: black SC with OM3 cable 44-position 3 RU (5.25" H) Loaded with two dual 2-fiber 3 mm plenum rated cables per reel, MPO connector on far end; each chassis contains 3 reels Singlemode; Chassis color: putty LC/UPC with singlemode reduce bend radius cable Multimode 50/25 μm Laser Optimized to 300 meters (OM3); Chassis color: black LC with OM3 cable * Shade of putty RCP-377PUExxx00 RCP-3J7PUExxx00 RCPB-3T7PUMxxx00 RCP-3KAPUExxx00 RRCPB-3CAPUMxxx00 MPO Connector xxx = length in feet (converted to meters); 03 = 00 ft 06 = 200 ft 092 = 300 ft 22 = 400 ft 53 = 500 ft 83 = 600 ft 24 = 700 ft 245 = 800 ft 275 = 900 ft 305 = 000 ft Tray Tray MPO -2 MPO 3-24 Rapid Panel 2 3 MPO 25-36 MPO 37-48 MPO 49-60 MPO 6-72 3 RU SC Only 5.25in. 72 Three (3) Spools per Chassis (Two MPO s per tray) Tray 3 MPO -2 MPO 3-24 MPO 49-60 MPO 6-72 Tray 2 MPO 25-36 MPO 37-48
Fiber Termination Panels with MPO Connector 4 RU (7" H) Rapid Fiber Panels Accessories Front Ordering information Rear 3" of rear clearance required MPO Connector Single Fiber Breakout Description Part Number 44-position 4 RU (7 H); Loaded with dual 2-fiber 3 mm plenum rated cable per reel, MPO connector on far end; each chassis contains 6 slide-in spool assecmblies Singlemode; Chassis color: putty SC/UPC with singlemode reduce bend radius cable LC/UPC with singlemode reduce bend radius cable SC/APC with singlemode reduce bend radius cable Multimode 50/25 μm Laser Optimized to 300 meters (OM3); Chassis color: black SC with OM3 cable LC with OM3 cable * Shade of putty 4 RU SC/LC RCP-47APUExxx00 RCP-4KAPUExxx00 RCP-4JAPUExxx00 RCPB-4TAPUMxxx00 RCPB-4CAPUMxxx00 xxx = length in feet (converted to meters); 03 = 00 ft 06 = 200 ft 092 = 300 ft 22 = 400 ft 53 = 500 ft 83 = 600 ft 24 = 700 ft 245 = 800 ft 275 = 900 ft 305 = 000 ft 2
Fiber Termination Panels with MPO Connector Optical Distribution Frames Ordering information Description NGF fiber main distributing frame Dimensions: 2.4 m x 762 mm x 60 mm (7' x 30" x 24") Maximum fiber capacity:,728 (2,304 using LC connectors) Part Number NGF-MDF7A00-30 NGF NGF Preterminated fiber termination block (FTB) with MPO connectors; Capacity: 44 Connector Type Left Block Orientation Right Block Orientation SC/UPC Singlemode NGF-MPML0752 NGF-MPMR0752 LC/UPC Singlemode NGF-MPML0K52 NGF-MPMR0K52 SC/APC Singlemode NGF-MPML0L52 NGF-MPMR0L52 MMSC Multimode (aqua). Cable type: OM3 NGF-MPML0T2 NGF-MPMR0T2 MMLC Multimode (aqua). Cable type: OM3 NGF-MPML0C2 NGF-MPMR0C2 NG3 NG3 fiber main distributing frame 2 Dimensions: 2.4 mm x 762 mm x 60 mm (7" x 30" x 24") Capacity:,440 terminations NG3 Preterminated fiber termination panel (FTP) with MPO connectors Connector type: SC/UPC Singlemode. Cable type: 72-fiber Connector type: LC/UPC Singlemode. Cable type: 72-fiber Connector type: SC/APC Singlemode. Cable type: 72-fiber NG3-MFTWN7A00 NG3-TPA700-R NG3-TPAK00-R NG3-TPAL00-R MPO Connector Connector type: MMLC Multimode (aqua). Cable type: 72-fiber, OM3 NG3-TPAC00-R Connector type: MMSC Multimode (aqua). Cable type: 72-fiber, OM3 NG3-TPAT00-R LSX LSX Chassis and MPO Cassette 3 LSX cassette-vam chassis, unloaded. Height: 9" Vertically mounts up to 2 LSX MPO cassettes LSX MPO cassette. Features (2) SC/UPC connector-style adapter ports LSX MPO Cassette. Features (2) SC/APC connector-style adapter ports 8" FDF fiber main distributing frame 4 Dimensions: 2.4 m x 660 mm x 305 mm (7' x 26" x 2") Maximum fiber capacity:,52 terminations FVM-VLM9X900-W LSX-MOD72C LSX-MODL2C E-50-L9 Single Fiber Breakout 8" FDF 8" FDF Preterminated fiber termination panels Connector type: SC/UPC Singlemode. Cable type: 72-fiber FCM-67M000 Connector type: SC/APC Singlemode. Cable type: 72-fiber FCM-6LM000 Connector type: MMSC Multimode (aqua). Cable type: 72-fiber, OM3 FCM-6TM000 See page 4 of literature number 03742AE (ODF Catalog) for additional NGF ordering information. 2 See page 32 of document number 03742AE (ODF Catalog) for additional NG3 ordering information. 3 See page 69 of document number 03742AE (ODF Catalog) for additional LSX ordering information. 4 See page 54 of document number 03742AE (ODF Catalog) for additional FDF ordering information. Accessories 3
Fiber Termination Panels with MPO Connector FPX Series Fiber Panels Ordering information Description Height Part Number FPX RU empty FPX panel, putty white; accommodates angle LEFT and angle RIGHT adapter packs; T-handle latch close.75" FPX-TR000-000 Accessories Single Fiber Breakout MPO Connector FPX Series Empty Panel; Termination only rack or cabinet mount panel, putty white FPX MPO Cassettes 2 RU empty FPX panel, putty white; accommodates 2 angle LEFT and 2 angle RIGHT adapter packs; T-handle latch close 3 RU empty FPX panel, putty white; accommodates 3 angle LEFT and 3 angle RIGHT adapter packs T-handle latch close 4 RU empty FPX panel, putty white; accommodates 4 angle LEFT and 4 angle RIGHT adapter packs; T-handle latch close 5 RU empty FPX panel, putty white; accommodates 6 angle LEFT and 6 angle RIGHT adapter packs; T-handle latch close Accessories; Blank plates Multimode MPO cassettes Singlemode MPO cassettes 2 fiber FPX cassettes; 2 SC (aqua) multimode adapters; 50/25 fiber laser optimized to 300 meters (OM3) 24 fiber FPX cassettes; 2 LC (aqua) multimode adapters ; 50/25 fiber laser optimized to 300 meters (OM3) 2 fiber FPX cassettes; 2 SC/ UPC singlemode adapters; singlemode fiber 24 fiber FPX cassettes; 2 LC/ APC singlemode adapters ; singlemode fiber 2 fiber FPX cassettes; 2 SC/ APC singlemode adapters; singlemode fiber Each LC adapter accepts 2 fiber each 2 See document number 0956AE for additional FPX ordering information. 3.50" FPX-2TR000-000 5.25" FPX-3TR000-000 7.00" FPX-4TR000-000 8.75" FPX-5TR000-000 FPX-00AP00 Angle LEFT cassette FPX-2MPLDA9 Angle RIGHT cassette FPX-2MPRDA9 Angle LEFT cassette FPX-24MPLDA6 Angle RIGHT cassette FPX-24MPRDA6 Angle LEFT cassette FPX-2MPLS07 Angle RIGHT cassette FPX-2MPRS07 Angle LEFT cassette FPX-24MPLS08 Angle RIGHT cassette FPX-24MPRS08 Angle LEFT cassette FPX-2MPLS0J Angle RIGHT cassette FPX-2MPRS0J 4
Fiber Termination Panels with Single Fiber Breakouts The Rapid fiber panel is available with a single or dual 2-fiber SC or LC fanout assembly. Kits are available for securing the fanouts to the rear of standard optical equipment, such as the NG3 and LSX fiber distribution frame and FPX panel. For easy cable routing and handling, a pull sock is included one per each rotating spool. Fanout Assembly Pulling Sock Over Fanout Assembly RU (.75") 3 RU (5.25") 4 RU (7") Mounting width: 9-inch or 23-inch, EIA or WECO Recess options: 2, 4 or 5 inches (5.08, 0.6 or 2.7 cm) Spool assemblies per panel: 3 6 Connector types available on panel: SC or LC SC SC or LC Ports per spool assembly: 24 24 24 Panel port capacity: 24 72 44 Payout cable connector types: SC or LC SC or LC SC or LC Fanout to connector cable length: 65" (.65 m) Pulling stock pull force: 40 lbs (8.4 kg) Pulling stock diameter: 2.5" (6.35 cm) Compliance: UL 863, NEBS Level 3, GR 435, GR 326 and GR 409 Note: For microcable specifications, see page page 24. Accessories Single Fiber Breakout MPO Connector 5
Fiber Termination Panels with Single Fiber Breakouts Typical Central Office/Data Center Application 4 Single Fiber Breakout MPO Connector 3 2 Shown above is a rendering of a typical Rapid Fiber Panel application. Below is an interconnection diagram that details the application and also highlights some of the available frame and panel options with single fiber breakout connectivity. Active Equipment Bay 2 Rapid Fiber Panel Active Equipment Fiber Jumper Accessories Microcable with Single Fiber Breakout 3 4 Optical Distribution Frame (ODF) Solutions NG3 LSX FDF 6
Fiber Termination Panels with Single Fiber Breakouts RU (.75" H) Rapid Fiber Panels Front Rear 3" of rear clearance required Ordering information Description Part Number 24-position RU (.75" H); Loaded with dual 2-fiber 2 mm plenum rated cable, fanout to single fiber breakouts with SC or LC connector on far end; chassis contains slide-in spool assembly Singlemode with reduced bend radius cable; Chassis color: almond* SC/UPC at panel end with SC/UPC on far end SC/UPC at panel end with SC/APC on far end SC/UPC at panel end with LC/UPC on far end SC/APC at panel end with SC/UPC on far end SC/APC at panel end with SC/APC on far end SC/APC at panel end with LC/UPC on far end LC/UPC at panel end with SC/UPC on far end LC/UPC at panel end with SC/APC on far end LC/UPC at panel end with LC/UPC on far end Multimode with 50/25 μm Laser Optimized to 300 meters (OM3) cable; Chassis color: black MMSC at panel end with MMSC on far end MMSC at panel end with MMLC on far end MMLC at panel end with MMSC on far end MMLC at panel end with MMLC on far end * Shade of putty RCP-72PU7xxx67 RCP-72PUJxxx67 RCP-72PUKxxx67 RCP-J2PU7xxx67 RCP-J2PUJxxx67 RCP-J2PUKxxx67 RCP-K2PU7xxx67 RCP-K2PUJxxx67 RCP-K2PUKxxx67 RCPB-T2PUTxxx67 RCPB-T2PUCxxx67 RCPB-C2PUTxxx67 RCPB-C2PUCxxx67 xxx = length in feet (converted to meters); 03 = 00 ft 06 = 200 ft 092 = 300 ft 22 = 400 ft 53 = 500 ft 83 = 600 ft 24 = 700 ft 245 = 800 ft 275 = 900 ft 305 = 000 ft Fanout - 2 Fanout 3-4 RU SC/LC.75" Rapid Panel One () Spool per Chassis Tray Fanout - 2 Fanout 3-4 (Two fanouts per tray) Accessories Single Fiber Breakout MPO Connector 7
Fiber Termination Panels with Single Fiber Breakouts 3 RU (5.25" H) Rapid Fiber Panels Single Fiber Breakout MPO Connector Front Ordering information Rear 3" of rear clearance required Description Part Number 72-position 3 RU (5.25" H); Loaded with dual 2-fiber 2 mm plenum rated cable on each spool assembly, fanout to single fiber breakouts with SC or LC connector on far end; chassis contains 3 slide-in spool assemblies Singlemode with reduced bend radius cable; Chassis color: almond* SC/UPC at panel end with SC/UPC on far end SC/UPC at panel end with SC/APC on far end SC/UPC at panel end with LC/UPC on far end SC/APC at panel end with SC/UPC on far end SC/APC at panel end with SC/APC on far end SC/APC at panel end with LC/UPC on far end Multimode with 50/25 μm Laser Optimized to 300 meters (OM3) cable; Chassis color: black MMSC at panel end with MMSC on far end MMSC at panel end with MMLC on far end * Shade of putty RCP-377PU7xxx67 RCP-377PUJxxx67 RCP-377PUKxxx67 RCP-3J7PU7xxx67 RCP-3J7PUJxxx67 RCP-3J7PUKxxx67 RCPB-3T7PUTxxx67 RCPB-3T7PUCxxx67 xxx = length in feet (converted to meters); 03 = 00 ft 06 = 200 ft 092 = 300 ft 22 = 400 ft 53 = 500 ft 83 = 600 ft 24 = 700 ft 245 = 800 ft 275 = 900 ft 305 = 000 ft Accessories 3 RU LC Only Fanouts Tray -2 3-24 25-36 37-48 Tray 2 49-60 6-72 73-84 37-48 Tray 3 97-08 09-20 2-32 33-44 Rapid Panel 5.25" 44 Three spools per chassis (four fanouts per tray) Tray Fanout -2 Fanout 3-24 Fanout 25-36 Fanout 37-48 Tray 3 Fanout 97-08 Fanout 09-20 Fanout 2-32 Fanout 33-44 Tray 2 Fanout 49-60 Fanout 6-72 Fanout 73-84 Fanout 85-96 3 RU SC Only Fanouts Tray -2 3-24 Tray 2 25-36 37-48 Tray 3 49-60 6-72 Rapid Panel 5.25" 72 Three spools per chassis (two fanouts per tray) Tray Fanout -2 Fanout 3-24 Tray 3 Fanout 49-60 Fanout 6-72 Tray 2 Fanout 25-36 Fanout 37-48 8
Fiber Termination Panels with Single Fiber Breakouts 4 RU (7" H) Rapid Fiber Panels Front Ordering information Description Part Number 44-position 4 RU (7" H); Loaded with dual 2-fiber 2 mm plenum rated cable on each spool assembly, fanout out to single fiber breakouts with SC or LC connector on far end, chassis contains 6 slide-in spool assemblies Singlemode with reduced bend radius cable. Chassis color: almond SC/UPC at panel end with SC/UPC on far end SC/UPC at panel end with SC/APC on far end SC/UPC at panel end with LC/UPC on far end SC/APC at panel end with SC/UPC on far end SC/APC at panel end with SC/APC on far end SC/APC at panel end with LC/UPC on far end LC/UPC at panel end with SC/UPC on far end LC/UPC at panel end with SC/APC on far end LC/UPC at panel end with LC/UPC on far end Rear Multimode with 50/25 μm Laser Optimized to 300 meters (OM3) cable; Chassis color: black MMSC at panel end with MMSC on far end MMSC at panel end with MMLC on far end MMLC at panel end with MMSC on far end MMLC at panel end with MMLC on far end 3" of rear clearance required RCP-47APU7xxx67 RCP-47APUJxxx67 RCP-47APUKxxx67 RCP-4JAPU7xxx67 RCP-4JAPUJxxx67 RCP-4JAPUKxxx67 RCP-4KAPU7xxx67 RCP-4KAPUJxxx67 RCP-4KAPUKxxx67 RCPB-4TAPUTxxx67 RCPB-4TAPUCxxx67 RCPB-4CAPUTxxx67 RCPB-4CAPUCxxx67 MPO Connector Single Fiber Breakout xxx = length in feet (converted to meters); 03 = 00 ft 06 = 200 ft 092 = 300 ft 22 = 400 ft 53 = 500 ft 4 RU SC/LC Fanouts Tray -2 3-24 Tray 2 25-36 37-48 Tray 3 49-60 6-72 Tray 4 73-84 85-96 Tray 5 97-08 09-20 Tray 6 2-32 33-44 83 = 600 ft 24 = 700 ft 245 = 800 ft 275 = 900 ft 305 = 000 ft Rapid Panel 7" 44 Six spools per chassis (two fanouts per tray) Tray Fanout -2 Fanout 3-24 Tray 6 Fanout 2-32 Fanout 33-44 Tray 2 Fanout 25-36 Fanout 37-48 Tray 5 Fanout 97-08 Fanout 09-20 Tray 3 Fanout 49-60 Fanout 6-72 Tray 4 Fanout 73-84 Fanout 85-96 Accessories 9
Fiber Termination Panels with Single Fiber Breakouts Frame Fanout Mounting Brackets NG3 Bracket with Fanout LSX Bracket with Fanout FDF Bracket with Fanout Ordering information Accessories Single Fiber Breakout MPO Connector Description* LSX Bracket; Bracket for attaching fanouts to standard 7" tall LSX panels 8" FDF Bracket; Bracket for attaching fanouts to standard 8" FDF panels NG3 Bracket; Bracket for attaching fanouts to standard NG3 panels Part Number LSX-ACC036 FDF-ACC378 NG3-ACCMPOBKT * Rapid panels with fanouts do not include fanout mounting brackets. Note: Fanout mounting brackets generally attach to the panels cable clamp mounting location. 20
Fiber Termination Panels Accessories TracerLight Patch Cords Ordering information Description Part Number TracerLight Power Source FTL-PS TracerLight Singlemode Fiber SCUPC-SCUPC Simplex reduced bend radius fiber patch cord FTL-7/7-DxxxM SCUPC-LCUPC Simplex reduced bend radius fiber patch cord FTL-7/C-DxxxM LCUPC-LCUPC Simplex reduced bend radius fiber patch cord FTL-C/C-DxxxM SCAPC-SCAPC Simplex reduced bend radius fiber patch cord FTL-E/E-DxxxM LCUPC-LCUPC Dual-zip reduced bend radius fiber patch cord FTL-CCZxxxM LCUPC-SCUPC Dual-zip reduced bend radius fiber patch cord FTL-7CZxxxM SCUPC-SCUPC Dual-zip reduced bend radius fiber patch cord FTL-77ZxxxM SCAPC-SCAPC Dual-zip reduced bend radius fiber patch cord FTL-EEZxxxM TracerLight Multimode OM3 Laser Optimized Fiber MMSC-MMSC Simplex patch cord FTL-9/9-JxxxM MMSC-MMLC Simplex patch cord FTL-9/P-JxxxM MMLC-MMLC Simplex patch cord FTL-P/P-JxxxM MMSC-MMSC Dual-zip patch cord FTL-99KxxxM MMSC-MMLC Dual-zip patch cord FTL-9PKxxxM MMLC-MMLC Dual-zip patch cord FTL-PPKxxxM xxx = Length in meters. Standard lengths: 00 = meter, 002 = 2 meters, 003 = 3 meters, 005 = 5 meters, 006 = 6 meters, 00 = 0 meters, 05 = 5 meters. See page 3 of document number 02880AE for additional TracerLight ordering information Accessories Single Fiber Breakout MPO Connector 2
Fiber Termination Panels Accessories 2 Millimeter Patch Cords and Cleaning Kits Ordering information Description Part Number SCUPC-SCUPC Simplex patch cord, 2 mm yellow jacket FPCM-SPSC-xM 2 mm Simplex Patch Cords Singlemode Fiber Multimode OM3 Laser Optimized Fiber SCUPC-LCUPC Simplex patch cord, 2 mm yellow jacket LCUPC-LCUPC Simplex patch cord, 2 mm yellow jacket SCAPC-SCAPC Simplex patch cord, 2 mm yellow jacket MMSC-MMSC Simplex patch cord, 2 mm aqua jacket MMSC-MMLC Simplex patch cord, 2 mm aqua jacket FPCM-SPSC/PLC-xM FPCM-SPLC-xM FPCM-APSC-xM FPCMA-MSC-A-xM FPCMA-MSC/MLC-A-xM MMLC-MMLC Simplex patch cord, 2 mm aqua jacket FPCMA-MLC-A-xM SCUPC-SCUPC Dual-zip patch cord, 2 mm yellow jacket FPC2-SPSC-xM MPO Connector 2 mm Dual-Zip Patch Cords 2 Singlemode Fiber Multimode OM3 Laser Optimized Fiber SCUPC-LCUPC Dual-zip patch cord, 2 mm yellow jacket LCUPC-LCUPC Dual-zip patch cord, 2 mm yellow jacket SCAPC-SCAPC Dual-zip patch cord, 2 mm yellow jacket MMSC-MMSC Dual-zip patch cord, 2 mm aqua jacket MMSC-MMLC Dual-zip patch cord, 2 mm aqua jacket MMLC-MMLC Dual-zip patch cord, 2 mm aqua jacket FPC2-SPSC/PLC-xM FPC2-SPLC-xM FPC2-APSC-xM FPC2A-MSC-A-xM FPC2A-MSC/MLC-A-xM FPC2A-MLC-A-xM Cleaning kit for MPO connectors; Includes: ea cleaning cassettes ea MPO bulkhead cleaner Instruction sheet MPO-CLNKIT Single Fiber Breakout Cleaning Kits Cleaning kit for all other fiber connectors/adapters (wet/dry cleaning method); Includes: Lint-free wipes Isopropyl alcohol Cotton swabs Lint-free pipe cleaners Oil-free compressed air Instruction sheet Dry method cleaning cassette with cassette refills (6-pack) x = Length in meters. Standard lengths: = meter, 2 = 2 meters, 3 = 3 meters, 5 = 5 meters, 6 = 6 meters, 0 = 0 meters, 5 = 5 meters. 2 x = Length in meters. -20 meters in meter increments, 25-65 meters in 5 meter increments FPC-CLNKIT FPC-CLNKIT2 or 70-50 meters in 0 meter increments. See pages 4-5 of document number 02880AE for additional Patch Cord ordering information Accessories 22
3 mm 24 Fiber Zip Plenum Rated Microcable Plenum PVC Jacket Color Singlemode Plenum Rated: Ivory Multimode OM3: Aqua Environmental Storage temperature: -40 to 70 C (-40 to 58 F) Operating temperature: 0 to 70 C (32 to 58 F) Installation temperature: 0 to 50 C (32 to 22 F) Mechanical Number of Fibers: 24 Maximum tensile load Short term: 660 N (50 lbf) Long term: 200 N (45 lbf) Minimum bend radius Installed: 30 mm (.8") Loaded: 60 mm (2.36") Maximum compression: 0 N/mm (57 lbf/in) Maximum impact: 2.94 N m (2.7 lbf ft) Optical Performance 3 mm Compliances Telcordia GR-409-CORE Interconnect Category, Impact and compression compliant to horizontal and vertical backbone cable requirements Tensile compliant to horizontal backbone cable requirements UL 90 plenum flammability rating EIA/TIA FOTPS EIA/TIA 568-B NFPA 262, NEC OFNP, FT-6 Maximum attenuation (db/km) 30 nm/550 nm Typical attenuation (db/km) 30 nm/550 nm Aramid yarn strength members 2x 250 μm acrylate coated fibers Guaranteed minimum bandwidth (MHz/km) 30 nm/550 nm Singlemode reduced bend radius.0/.0 0.4/0.3 N/A Transmission Performance Guaranteed Fast Ethernet 00 Mbps 30 nm/550 nm Gigabit Ethernet Gbps 30 nm/550 nm 0 Gigabit Ethernet 0 Gbps 30 nm/550 nm Singlemode reduced bend radius 2 km/na 5 km/na 0 km/40 km Accessories Single Fiber Breakout MPO Connector Restriction of the use of hazardous substances. RoHS (2002/95/EC) Comply with California Prop 65 for Safe Drinking and Toxic Enforcement Act Reduced Bend Radius Fiber is compliant to ITU-T G.652.D, ITU-T G.657A&B, and IEC 60793-2-50 Type B..3 23
3.6 mm 2 Fiber Indoor/Outdoor Microcable LSZH Outer Jacket Accessories Single Fiber Breakout MPO Connector Environmental Operating temperature: -40 to 75 C (-40 to 678 F) Installation temperature: -30 to 50 C (-22 to 22 F) Mechanical Number of Fibers: 2 Maximum tensile load (lbf) Short term: 220 (50 ) Long term: 0 (25) Minimum bend radius (in.) Installed: 36 mm (.4") Loaded: 54 mm (2.") Optical Performance Compliances Restriction of the use of hazardous substances RoHS (2002/95/EC) Comply with California Prop 65 for Safe Drinking and Toxic Enforcement Act Telcordia GR-20 tested to relevant specifications Telcordia GR-409-CORE, EIA/TIA FOTPS (Independently verified) ISO/IEC 80, IEC 60794-2 Optical Fiber Cables Part 2 EIA/TIA 568-B (UL) 666, NEC OFNR, FT-4 Maximum attenuation (db/km) 30 nm/550 nm Typical attenuation (db/km) 30 nm/550 nm Reduced Bend Radius Fiber allows the minimum bend radius to be cut in half and is compliant to ITUT G.652.D, ITU-T G.657A&B, and IEC 60793-2-50 Type B..3 Guaranteed minimum bandwidth (MHz/km) 30 nm/550 nm Singlemode reduced bend radius.0/.0 0.4/0.3 N/A Transmission Performance Guaranteed Fast Ethernet 00 Mbps Gigabit Ethernet Gbps 0 Gigabit Ethernet 0 Gbps Singlemode reduced bend radius 2 km/na 5 km/na 0 km/40 km 3 mm Aramid yarn strength members Water swellable member Acrylate coated fibers 24
Index E E50-L9... 3 F FCM-6LM000... 3 FCM-6TM000... 3 FCM-67M000... 3 FDF-ACC378... 20 FPC2A-MLC-A-xM... 22 FPC2A-MSC-A-xM... 22 FPC2A-MSC/MLC-A-xM... 22 FPC2-APSC-xM... 22 FPC2-SPLC-xM... 22 FPC2-SPSC/PLC-xM... 22 FPC2-SPSC-xM... 22 FPC-CLNKIT... 22 FPC-CLNKIT2... 22 FPCMA-MLC-A-xM... 22 FPCMA-MSC-A-xM... 22 FPCMA-MSC/MLC-A-xM... 22 FPCM-APSC-xM... 22 FPCM-SPLC-xM... 22 FPCM-SPSC/PLC-xM... 22 FPCM-SPSC-xM... 22 FPX-00AP00... 4 FPX-TR000-000... 4 FPX-2TR000-000... 4 FPX-3TR000-000... 4 FPX-4TR000-000... 4 FPX-5TR000-000... 4 FPX-2MPLDA9... 4 FPX-2MPLS0J... 4 FPX-2MPLS07... 4 FPX-2MPRDA9... 4 FPX-2MPRS0J... 4 FPX-2MPRS07... 4 FPX-24MPLDA6... 4 FPX-24MPLS08... 4 FPX-24MPRDA6... 4 FPX-24MPRS08... 4 FTL-7/7-DxxxM... 2 FTL-7/C-DxxxM... 2 FTL-7CZxxxM... 2 FTL-9/9-JxxxM... 2 FTL-9/P-JxxxM... 2 FTL-9PKxxxM... 2 FTL-77ZxxxM... 2 FTL-99KxxxM... 2 FTL-C/C-DxxxM... 2 FTL-CCZxxxM... 2 FTL-E/E-DxxxM... 2 FTL-EEZxxxM... 2 FTL-P/P-JxxxM... 2 FTL-PPKxxxM... 2 FTL-PS... 2 FVM-VLM9X900-W... 3 L LSX-ACC036... 20 LSX-MOD72C... 3 LSX-MODL2C... 3 M MPO-CLNKIT... 22 N NG3-ACCMPOBKT... 20 NG3-MFTWN7A00... 3 NG3-TPA700-R... 3 NG3-TPAC00-R... 3 NG3-TPAK00-R... 3 NG3-TPAL00-R... 3 NG3-TPAT00-R... 3 NGF-MDF7A00-30... 3 NGF-MPML0C2... 3 NGF-MPML0K52... 3 NGF-MPML0L52... 3 NGF-MPML0T2... 3 NGF-MPML0752... 3 NGF-MPMR0C2... 3 NGF-MPMR0K52... 3 NGF-MPMR0L52... 3 NGF-MPMR0T2... 3 NGF-MPMR0752... 3 R RCP-JDUExxx00... 0 RCP-J2DUExxx00... 0 RCP-J2PU7xxx67... 7 RCP-J2PUExxx00... 0 RCP-J2PUJxxx67... 7 RCP-J2PUKxxx67... 7 RCP-KDUExxx00... 0 RCP-K2DUExxx00... 0 RCP-K2PU7xxx67... 7 RCP-K2PUExxx00... 0 RCP-K2PUJxxx67... 7 RCP-K2PUKxxx67... 7 RCP-3J7PU7xxx67... 8 RCP-3J7PUExxx00... RCP-3J7PUJxxx67... 8 RCP-3J7PUKxxx67... 8 RCP-3KAPUExxx00... RCP-4JAPU7xxx67... 9 RCP-4JAPUExxx00... 2 RCP-4JAPUJxxx67... 9 RCP-4JAPUKxxx67... 9 RCP-4KAPU7xxx67... 9 RCP-4KAPUExxx00... 2 RCP-4KAPUJxxx67... 9 RCP-4KAPUKxxx67... 9 RCP-47APU7xxx67... 9 RCP-47APUExxx00... 2 RCP-47APUJxxx67... 9 RCP-47APUKxxx67... 9 RCP-7DUExxx00... 0 RCP-72DUExxx00... 0 RCP-72PU7xxx67... 7 RCP-72PUExxx00... 0 RCP-72PUJxxx67... 7 RCP-72PUKxxx67... 7 RCP-377PU7xxx67... 8 RCP-377PUExxx00... RCP-377PUJxxx67... 8 RCP-377PUKxxx67... 8 RCPB-CDUMxxx00... 0 RCPB-C2DUMxxx00... 0 RCPB-C2PUCxxx67... 7 RCPB-C2PUMxxx00... 0 RCPB-C2PUTxxx67... 7 RCPB-TDUMxxx00... 0 RCPB-T2DUMxxx00... 0 RCPB-T2PUCxxx67... 7 RCPB-T2PUMxxx00... 0 RCPB-T2PUTxxx67... 7 RCPB-3T7PUCxxx67... 8 RCPB-3T7PUMxxx00... RCPB-3T7PUTxxx67... 8 RCPB-4CAPUCxxx67... 9 RCPB-4CAPUMxxx00... 2 RCPB-4CAPUTxxx67... 9 RCPB-4TAPUCxxx67... 9 RCPB-4TAPUMxxx00... 2 RCPB-4TAPUTxxx67... 9 RRCPB-3CAPUMxxx00... 26
Catalog Contact us: P.O. Box 0 Minneapolis, Minnesota USA 55440-0 Tel: -800-366-389 Tel: -952-938-8080 Fax: -952-97-3237 www.te.com/adc www.us.telecomosp.com TE Connectivity, TE connectivity (logo), Tyco Electronics, TE (logo), ADC, NG3, Rapid, RapidReel, and TracerLight are trademarks of the TE Connectivity Ltd. family of companies and its licensors. While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 30AE 0/ Original 20 ADC is now TE Connectivity