3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 ET05C 24HR 30A SPST TM SW Intermatic Inc. Catalog Number Manufacturer Description Weight per unit Product Category ET05C Intermatic Inc. The 24HR 30A SPST 20-277V NEMA 24-Hour Electronic Time Switches Enable A Program to Be Repeated On A Daily Basis. These Time Switches Provide Dependable and Uncomplicated Performance, Plus to-the-minute Programming For Accurate Control and Reduced Energy Costs. Up to 28 Setpoints or Events Can Be Preset to Automatically Repeat. The Program Can Be Disabled At Any Time By Placing The Time Switch In The Manual Operating Mode. Control Buttons Provide Manual Control Of Each Circuit Independently, Regardl N/A Electronic Time Switches Features action x SPST amperage rating 30 connection Teeter Type Contact Configuration NO Contact Rating 30 AMP @ 20/240 VAC (Resistive NO), 20 AMP @ 28 VDC (Resistive NO), 30 AMP @ 20/240 VAC (Inductive NO), 5 AMP @ 20/240 VAC (Tungsten NO), 20 AMP @ 20-277 VAC (Ballast NO) Poles Timing Range MIN - 23 HR 59 MIN Voltage Rating 277 Descriptions Description Long Description Product Type special features 24HR 30A SPST TM SW The 24HR 30A SPST 20-277V NEMA 24-Hour Electronic Time Switches enable a program to be repeated on a daily basis. These time switches provide dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 28 setpoints or events can be preset to automatically repeat. The program can be disabled at any time by placing the time switch in the Manual operating mode. Control buttons provide manual control of each circuit independently, regardl 24HR 30A SPST 20-277V Nema Features: 7-Day, Multi-Voltage, Battery Backup, Year Warranty, Automatic Adjustment for Daylight Saving Time
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 Manufacturer Information Brand Intermatic Inc. GTIN 0007827509933 Manufacturers Part Number ET05C UPC 07827509933 Taxonomies, Classifications, and Categories Category Description TIME CLOCKS Type ELECTRONIC Packaging Carton Package 6 Weight Per each 0 Uses, Certifications, and Standards Application Indoor, HVACR, Industrial Enclosure NEMA Steel Frequency Rating 50/60 Mounting WALL MOUNT Operating Temperature -40 to +55 DEG F, -40 to +68 DEG C standard ccsaus Certified, California TITLE 24 Compliant, HVACR, Title CA 20 Listed
ET00 Series Electronic Time Switches ET00 Series 24-Hour Electronic Time Switch The ET00 24-Hour Electronic Time Switches enable a program to be repeated on a daily basis. These time switches provide dependable and uncomplicated performance, plus to-the-minute programming for accurate load control and reduced energy costs. Up to 28 setpoints or events can be preset to automatically repeat. The program can be disabled at any time by placing the time switch in the Manual operating mode. Control buttons provide manual control of each circuit independently, regardless of the operating mode. All models come with two industrial-grade AAA alkaline batteries to provide time keeping and automatic carryover for a minimum of 3 years. The batteries are easily replaced in the field and do not require removing the time switch mechanism or field wiring. Each time switch is housed in a lockable enclosure to protect against vandalism and unauthorized tampering. Features Program can be repeated on a daily basis Multi-volt operation from 20-277 VAC, 50/60 Hz To-the-minute programming for accurate load control and reduced energy costs Up to 28 setpoints or events Automatic Daylight Saving Time (DST) ON/OFF adjustment (factory enabled) Non-volatile EEPROM memory protects programming indefinitely 2-circuit models are field (jumper) configurable for: 2 independent outputs, DPST output, or channel ON pulse OFF pulse output Temporary override or permanent manual override available via control buttons Project: Location: Product Type: Contact/Phone: Model #: ET05C Ratings Enclosure Options: Knockouts: Input Voltage: Operating Temperature: ET05, ET25 Models N.O. Contact Ratings: Resistive: Resistive: Inductive: Tungsten: Ballast: Motor: Motor: Standard: Type Gray Painted Steel R-Option: Type 3R Gray Painted Steel PD82 Option: Type 3R Gray High-Impact UV Resistant Polycarbonate Plastic with Clear Cover Combination ½" & ¾" Knockouts Bottom: 2, Left:, Right:, Back: 20, 208, 240, or 277 VAC 50/60 HZ -40 F to 55 F (-40 C to 68 C) 30 Amps @ 20/240 VAC 20 Amps @ 28 VDC 30 Amps @20/240 VAC 5 Amps @ 20/240 VAC 20 Amps @ 20-277 VAC HP @ 20 VAC 2 HP @ 240 VAC ET5CPD82 ET25CR
ET00 Series ET5 Models N.O./N.C. Contact Ratings: Pulse Feature: Auto DST: Battery Backup: Wiring Terminals: Minimum ON/OFF Time: Maximum ON/OFF Time: Warranty: Resistive: 20 Amps (N.O.), 0 Amps (N.C.) @ 20/240 VAC Inductive: 20 Amps (N.O.), 0 Amps (N.C.) @ 20/240 VAC Tungsten: 5 Amps (N.O.) @ 20/240 VAC Ballast: 20 Amps (N.O.), 3 Amps (N.C.) @ 20-277 VAC Motor: HP (N.O.); ¼ HP (N.C.) @ 20 VAC Motor: 2 HP (N.O.); ½ HP (N.C.) @ 240 VAC 2-circuit models feature 2 second pulse option for contactor and bell ringing applications Automatic adjustment for Daylight Saving Time Two field-replaceable AAA batteries maintain date and accurate time for a minimum of three years. Batteries can be replaced when power to mechanism is activated. #8 to #0 AWG wire minute 23 hours 59 minutes Limited year Model Number Circuits Switch Volts AC Rating Enclosure Shipping Weights ET05C SPST 20, 208, 240, 277 30 Amps Type Steel 2.9 lbs. (.3 kg) ET05CPD82 SPST 20, 208, 240, 277 30 Amps Type 3R Plastic 3.6 lbs. (.6 kg) ET05CR SPST 20, 208, 240, 277 30 Amps Type 3R Steel 3.6 lbs. (.6 kg) ET5C SPDT 20, 208, 240, 277 20/0 Amps Type Steel 2.9 lbs. (.3 kg) ET5CPD82 SPDT 20, 208, 240, 277 20/0 Amps Type 3R Plastic 3.6 lbs. (.6 kg) ET5CR SPDT 20, 208, 240, 277 20/0 Amps Type 3R Steel 3.6 lbs. (.6 kg) ET25C* 2 SPST 20, 208, 240, 277 30 Amps Type Steel 2.9 lbs. (.3 kg) ET25CPD82* 2 SPST 20, 208, 240, 277 30 Amps Type 3R Plastic 3.6 lbs. (.6 kg) ET25CR* 2 SPST 20, 208, 240, 277 30 Amps Type 3R Steel 3.6 lbs. (.6 kg) *Can be wired as DPST Specification The time switch shall be of the 24-hour electronic type, capable of permitting up to 28 setpoints or events. The time switch shall provide a minimum ON or OFF time of minute. The time switch to be powered by (20)(208)(240) (277) VAC, (50)(60) Hz power supply. The time switch mechanism shall be a snap-in design to provide ease of mechanism removal for mounting the enclosure. The time switch enclosure shall be a (Type steel)(type 3R steel)(type 3R plastic) lockable enclosure, which shall be painted with an electrostatic process to eliminate the potential for corrosion. The time switch shall provide clear terminal identification on a non-curling terminal insulator. Terminal connections shall be made using teeter-type terminal screws to provide secure connections for wire sizes up to #0 AWG. Switch configuration shall be (SPST)(DPST)(SPDT) with a UL or CSA listed switch rating of: (If SPST:) Resistive: 30 Amps @ 20/240 VAC Resistive: 20 Amps @ 28 VDC Inductive: 30 Amps @ 20/240 VAC Tungsten: 5 Amps @ 20/240 VAC Ballast: 20 Amps @ 20-277 VAC Motor: HP @ 20 VAC Motor: 2 HP @ 240 VAC (If SPDT:) Resistive: 20 Amps (N.O.), 0 Amps (N.C.) @ 20/240 VAC Inductive: 20 Amps (N.O.), 0 Amps (N.C.) @ 20/240 VAC Tungsten: 5 Amps (N.O.) @ 20/240 VAC Ballast: 20 Amps (N.O.), 3 Amps (N.C.) @ 20-277 VAC Motor: HP (N.O)., ¼ HP (N.C.) @ 20 VAC Motor: 2 HP (N.O.), ½ HP (N.C.) @ 240 VAC The time switch shall be UL or CSA listed under UL category 96 Energy Management Equipment and shall be Intermatic model (See Model Numbers Listed). www.intermatic.com
ET00 XXXXXXXX Series Diagrams 2 3 4 2 3 4 5 Neutral Line 20 VAC Input ET05-20 VAC-SPST Install jumper only if timer input and load voltage are the same. L2 L 2 ET5-SPDT (load switching) Install jumper only if timer input and load voltages are the same. L2 L 240 VAC Input 2 3 4 5 6 L2/Neutral L ON Pulse 2 3 4 5 6 CLOSE OFF Pulse Configuration jumper set to SIM. COM Maintained Contactor OPEN ET25-240 VAC-DPST ET25-Pulse 2x SPST Configure jumper set to PUL. 2 3 4 5 6 2 3 4 5 6 L2/Neutral L 20/208/240/277 VAC Input ET25-2x SPST L3 L4/Neutral Configuration jumper set to IND. L5 2 L6/Neutral L2/ Neutral L Configuration jumper set to PUL Each event, ON or OFF, Rings Bell. ET25-Pulse 2x SPST (bell ringing)
ET00 Series Notes www.intermatic.com