V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and the ability to add position feedback, in a matter of minutes, all in one compact and rugged housing. Maximum flexibility and versatility!! With a rugged Nema 4X, IP 66, die cast aluminum housing, versatile polyester coating, and standard features like external zero and span adjustment, this unit expands the VAC offering to cover this all in one market for positioners. Add to this the excellent performance yet simple design, and the combination equals a real value. A product that offers it all.and all in one compact, simple, housing!!
V200 Options/Features: The V200 Internal 4/20 ma Feedback Internal switches- Mechanical or Reed. Various pilot assemblies. Flexible mounting for rotary or linear applications V200 Benefits Compact Design Quality components = rugged and accurate performance External zero and span adjustment-without removing the positioner cover External zero and span (complete calibration) adjustment without removing cover Easily maintain key components Internal Ip with simple loop test points. Clear, visible indicator with arrow indicator standard-beacon optional Dome Indicator Field changeable to any available option
Positioner V200 E (electropneumatic) Options V200E-Standard Nema 4X Unit V200E-EX Explosion Proof Unit V200E-FF Fail Freeze Unit V200E-GA Gas Approved Unit V200E-0/10 Volt Unit
V200 Dimensional Drawings 72 [2 27/32"] Gauge connections(4x) 1/8" NPT 52.5 [2 1/16"] 30 [1 3/16"] 35 [1 3/8"] 22.5 [7/8"] 40.5 [1 19/32"] 39.5 [1 9/16"] Air connections(5x) 1/4" NPT 122.6 [4 13/16"] 213.3 [8 13/32"] Hex size: 8.7 [11/32"] 79.1 [3 1/8"] 61.1 [2 13/32"] 121.1 [4 25/32"] 172.4 [6 25/32"] 12.5 [1/2"] 31 [1 7/32"] 25 [31/32"] 74.8 [2 15/16"] M6 - depth 15/32" (12mm) UNC 5/16" - depth 15/32"(12mm) 57.2 [2 1/4"] 35.4 [1 13/32"] 35.4 [1 13/32"] 57.2 [2 1/4"] 74.8 [2 15/16"] 15 [19/32"] Raised Indicator 127 [5"] 97.4 [3 27/32"] 15.5 [5/8"] 22 57 [2 1/4"] 25 [31/32"] 31 [1 7/32"] Dimensional Drawing VAC Positioner V200 PP/EP 108 [4 1/4"] 132.7 [5 7/32"] 75 [2 15/16"] V200P, E, E-IS Hex size: 10 [13/32"] Hex size: 10 [13/32"] 122.6 [4 13/16"] 133.9 [5 9/32"] 314.5 [12 3/8"] 61.1 [2 13/32"] 34 [1 11/32"] 133.1 [5 1/4"] 172.4 [6 25/32"] 122.6 [4 13/16"] 133.2 [5 1/4"] 270.8 [10 21/32"] 61.1 [2 13/32"] 97.3 [3 27/32"] 52.8 [2 1/16"] 64.1 [2 17/32"] 162.8 [6 13/32"] 208.6 [8 7/32"] 319.7 [12 19/32"] Tapped Raised Indicator 127 [5"] 97.5 [3 27/32"] 15.5 [5/8"] 22 57 [2 1/4"] 25 [31/32"] 31 [1 7/32"] 75 [2 15/16"] 108 [4 1/4"] 148 [5 13/16"] 134 [5 9/32"] 181.2 [7 1/8"] 75.2 [2 31/32"] 139 [5 15/32"] Raised Indicator 127 [5"] 97.5 [3 27/32"] 12.5 [1/2"] 22 108 [4 1/4"] 132.8 [5 7/32"] 57 [2 1/4"] 25 [31/32"] 75 [2 15/16"] 31 [1 7/32"] 165.5 [6 17/32"] 187.1 [7 3/8"] Tapped 33.1 [1 5/16"] V200E-EX, E-GA V200E-FF V200 0-10V NOTE: Inches appear in parentheses
Technical Specifications: Positioners: Pneumatic Electropneumatic V200P V200E & E-IS V200 E-EX V200E-FF Input Signal 3-15 PSI 4-20mA 4-20 ma 4-20 ma Supply Pressure 145 PSI 145 PSI 100 PSI 145 PSI Linearity error <0.7% f.s. <1.0% f.s. <0.8% f.s. <1.2% f.s. Hysteresis <0.4% f.s. <0.6% f.s. <0.5% f.s. <0.9% f.s Repeatability <0.3% f.s. <0.5% f.s. <0.4% f.s. <0.8% f.s. Temperature range -40 to 185 F -40 to 185 F -40 to 158 F -20 to 158 F -40 to 85 C -40 to 85 C -40- to 70 C -20 to 70 C Standard Highflow/gain Air Delivery 28.3 scfm 31.8 scfm @87 PSI (600 kpa) Bleed Rate.35 scfm.53 scfm @87 PSI (600 kpa) Pressure Gain @87 PSI 300:1 800:1 Air connections 1/4 NPT Gauges 1/8 NPT Cable Entry 1/2 NPT Ingress & corrosion protection NEMA 4X and IP66 Standard coating Polyester Weight P-3.2 lbs E-3.8 lbs. EX-5.3 lbs. FF-5.4 lbs. Feedback General: Plug-in components directly into V200 series positioner housing Can combine switches and 4/20 feedback Conduit connections 1/2 NPT Enclosure Nema 4X/IP 66 Operating temp -40 to +185 F (-40 to +85 C) Mechanical Switches: 2-Type: SPDT, V3 Max Load: Resistive (Inductive) Voltage 15 A (3) A 125/250 VAC 0.25 A (0.1) A 220 VDC 0.5 A (0.2) A 110 VDC 8 A (7) A 24 VDC Reed Switches: 2-Type: SPDT-CO, Form C Contact rating: max 3W Voltage: Switching max 100 VDC Breakdown min 200 VDC Current: Switching max 0.20 A Carry max 1.3 A Contact resistance: 0.2 ohms Contact capacitance: 0.3 pf 4/20 ma Position Feedback: Voltage supply: 7-30 VDC Output: 4-20 ma, 2 wire Loop Impedance: max 850 ohms @ 24 VDC Linearity error: <1.2% Hysteresis: <0.2% Temp. Sensitivity: < 0.1%/10 F (5.5 C) Others Options: Potentiometer-Namur Sensors Approvals Ratings for hazardous locations: V200E-EX Enclosure is Nema 4 X (IP65) ATEX Explosion Proof EEx d IIB + H2 T4 Temp Intrinsically Safe EEx ia IIB T4 Temp -40 C Ta 70 C Entity Parameters Umax = 30 VDC C=0 uf Imax=125 ma L=0 m H FM and CSA Explosion Proof Pi = 0.7 w max CL I, Div 1 & 2, Groups B, C, D T6 Temp Ta=70 C Dust Ignition Proof CL II & III, Div 1 Groups E, F, G & T6 Temp Ta= 70 C Suitable For CL II & III, Div 2, Groups F, G T6 Temp Ta= 70 C Intrinsically Safe CL I, Div 1, Groups C & D CL II, Div 1, Groups E, F, G CL III, Div 1 Fibers T4 Temp Ta= 70 C Non-Incendive CL 1, Div 2, Groups A,B,C,D T4 Temp Ta= 70 C Entity Parameters U: (Vmax) = 30 VDC Ci= 0 uf For Intrinsically I: (Imax) = 125 ma Li=O m H Safe systems Pi=.7 w max V200E-IS (Intrinsically safe) Atex EEx ia IIC T4/T6 FM CL1 DIV1 Grp A B C D CSA Ex ia, CL I Grp A B C D Ex ia CL I DIV2 Grp A B C D
Ordering Codes: Pneumatic V200 P Electro-pneumatic V200 E Spindles (Drive): Explosion Proof V200 EX Intrinsically Safe V200 IS D1 Namur - Standard Fail Freeze V200 FF D2 1/2 Square Spindle DX D3 3/8 Square - Short Front Cover D4 Round Linear 90 degree rotation 90 D5 Double D 60 degree rotation 60 D6 3/8 Square - Long 45 degree rotation 45 D7 3/4 Slotted 30 degree rotation 30 D8 12mm Dual Post Blank scale XX D9 Old Namur - Special Indicator Arrow A D10 Namur - Special Beacon B Cam (standard) 90 C1 D11 Octagon 45/90 C2 30/60 C3 60/120 (others available) C4 Spool Valve Options (shipped with standard spool) High Gain HG Feedback Options FB 2 SPDT Mechanical Switches M 2 SPDT Reed Switches R 4-20 ma Transmitter ma Mech Switches w/transmitter MmA Reed Switches w/transmitter RmA Example: V200E-D1-90-B-C1-FB-MmA Electropneumatic with namur spindle, 90 degree cover, raised indicator, 90 degree cam, feedback with mechanical switches and 4/20 ma transmitter. Marketed by VAC (Valve Accessories & Controls), the V200 positioner line is supported by a knowledgeable and professional staff. Customer service is a key component to the VAC package. Local inventories and technical assistance are just a phone call away. The V200 package includes a diverse mix of positioners and feedback options for mounting to various actuator applications, all in one compact Nema 4X housing. Quality design, manufacturing, and product performance are coupled with competitive pricing and excellent service, providing all process industries a cost effective alternative to accurate positioner control and position feedback. VALVE ACCESSORIES & CONTROLS 12585 Old Highway 280 East Suite 101 Chelsea, AL 35043 TEL: 205-678-0507 FAX: 205-678-0510 info@vacaccessories.com VALVE ACCESSORIES & CONTROLS 12942 Bedford Falls Drive Cypress, TX 77429 TEL: 713-493-2624 Cell: 713-253-7781 FAX: 281-256-9399 randye@vacaccessories.com vacaccessories.com/v200 BUDENBERG GAUGE CO. LTD 4 Gilchrist Road Northbank Industrial Park Irlam Manchester M44 5AY Tel: +44 (0)870 442 5441 Fax: +44 (0)870 787 7350 sales@budenberg.co.uk