33NE January 2016 SINGLE SEATED CAGE VALVES SERIES 1400 MODEL 1401 Previously manufactured by Dezurik and Honeywell
Description: The Model 1401 valve combines a heavyduty, singleseated globe valve with a pneumatic diaphragm actuator for low and ultralow flow applications. The actuator is spring type which provides either direct or reverse action as specified. Accessories: Pneumatic and electropneumatic positioners Top or sidemounted Handwheel Micro Switch open/closed switches Solenoids Transducers Air sets SPECIFICATIONS Type Diaphragm Material Spring Air Pressure (Airtodiaphragm) Pressed steel diaphragm case plates and heavy duty, cast iron yoke. Finished in blue corrosionresistant enamel. Molded of Buna N with a Nylon insert. Ambient temperature range of 40 0 F (40 82 C). Other materials are available for higher or lower temperature ranges. Totally enclosed. Normal: or 25 psi ( or kpa) Maximum: 50 psi (344 kpa) Body Type Material s Singleseated, unbalanced, straightthrough, globe type. Threaded ends: 0.5, 0.75, 1, 1.5 and 2 (15, 20, 25, 40 and 50 mm). Flanged ends : 1, 1.5 and (25, 40 and 50 mm) Cast iron with threaded ends: 250 lb. ANSI B161 in 0.5, 0.75, 1, 1.5 and (15, 20, 25, 40 and 50 stainless steel with threaded ends: 600 lb. ANSI B14 in 0.5, 0.75, 1, 1.5 and (15, 20, 25, 40 2 Allagash International Group, LLC Bulletin 33NE January 2016
SPECIFICATIONS Bonnet Trim Type Packing Material Plain: For process temperatures from 32 to 250 F (0 232 C). Dieformed graphite packing can be used for temperatures up to 750 F (3 C). Extension Column: For process temperatures from 150 to 32. (101 0 C). Radiation Fin: For process temperatures from 450 to 750 F (232 3 C). Not furnished with cast iron bodies. Bellows seal: Used when a positive stem seal is required, for process temperatures up to 750 F (3 C). Bolted Box: PTFE vring or dieformed graphite. Stainless steel type 316 standard. Also available in Monel, Alloy 20, Hastelloy C and solid Stellite*. Plugs Valve Travel Leakage (2760 kpa). * Stellite is a registered trademark of Stoody Deloro Stellite, Inc. ORDERING DATA Please Specify: Valve Model 1401 Flow (low or ultralow) Body Material End connections Bonnet Packing Trim material Spring range size Action (airtoclose or airtoopen) Note: Specifications subject to change without notice. 3 Allagash International Group, LLC Bulletin 33NE January 2016
FLOW COEFFICIENTS Equal Percentage, Threaded Ends Cv/Kv Values Valve 5" 15mm 0.75" 20mm " 6..0.5 1.7 13. 12 1 2.2 6. 10.0 8.7 10.8.3 Equal Percentage 6. 6. 2.2 4 sizes 5 sizes 6 sizes 2.2 Equal Percentage, Flanged Ends Cv/Kv Values Valve 26mm.0.5 1 10.5 12.7.0 1 6. 10.0 8.7 10.8.3 Equal Percentage 6. 6. 4 sizes 2.2 5 sizes 6 sizes Equal Percentage, Flanged Ends Cv/Kv Values Valve 5" 15mm 0.75" 20mm 26mm " Equal Percentage 1 0 0.25 0.22 4 sizes 0.25 0.22 0.25 0.22 Note: Cv values = Flow in GPM of water at 1 psi pressure drop. Kv values = Flow in M /hour of water at 100 kpa pressure drop. 4 Allagash International Group, LLC Bulletin 33NE January 2016
FLOW COEFFICIENTS Equal Percentage, Flanged Ends Cv/Kv Values Equal Percentage Valve 1 4 sizes 0.25 0.22 Linear ed, Threaded Ends Cv/Kv Values Equal Percentage Valve 5" 15mm 0.75" 20mm ".1 7. 12..2 14.2 12.3 16.0 13.8 1.1 7.. 8.6 14.7 12.7 10.5.1 4 sizes Linear ed, Flanged ends Cv/Kv Values Equal Percentage Valve 12..2 13.2. 14.6 12.6 1.1 7. 10.0 8.7 1.7.6 8.3 4 sizes Ultra LowFlow Trim Linear ed, Thread or Flanged Ends Cv/Kv Values Equal Percentage Valve 5" 15mm 0.75" 20mm 1.0" 0. 1.0 0. 1.0 0. 1 0.40 0. 0.40 0. 0.40 0. 0.16 0.14 0.16 0.14 0.16 0.14 0.071 0.061 0.071 0.061 0.071 0.061 4 sizes 0.025 0.022 0.025 0.022 0.025 0.022 Note: Cv values = Flow in GPM of water at 1 psi pressure drop. Kv values = Flow in M /hour of water at 100 kpa pressure drop. 5 Allagash International Group, LLC Bulletin 33NE January 2016
ACTUATOR SHUTOFF CAPABILITIES AirtoClose (Spring toopen) Flow Coefficient Cv/Kv Valve VPort VPort VPort 0.5 0.75" 15mm 20mm 0.25 0.22 2.2 Air supply Psig/KPA Spring Range psig/kpa VPort VPort VPort 315 203 530 60 45 780 530 3650 214" 146" 3 2162 830 5720 830 5720 26 1441 315 203 1015 60 214" 146" 3 2162 26 1441 315 203 214" 146" 3 2162 26 1441 630 41207 7820 7820 315 203 214" 146" 3 2162 26 1441 * These are 315 psig (203kPa) springs set to increase maximum pressure differential Note: These shutoff ratings are the maximum permissible for the specified actuator and spring ranges. Further limitations by the body pressure rating per ANSI B16.5 may occur. For ultralow differentials, see pg 6 Allagash International Group, LLC Bulletin 33NE January 2016
ACTUATOR SHUTOFF CAPABILITIES AirtoClose (SpringtoOpen), Continued Flow Coefficient Cv/Kv Valve VPort, V Port Lin 0.5 0.75" 15mm 20mm 6..0 75.8. 10.00 8.6 8.7 12.1 13.7 10.5. 14.2 12.3 6.. 10.00 8.6 8.7 10.5 10.8.1.3 1 14.7.7 12.7 12.7 1 10..7 14.6 16.0 12.6 13.8 Air supply Psig/KPA Spring Range psig/kpa 315 203 VPort 25 2030 530 3650 140 65 140 65 0 620 70 480 214" 146" 3 2162 475 3270 1365 400 830 5720 240 1650 740 5100 240 1650 740 5100 165 40 530 60 1 30 4 3130 26 1441 300 2070 300 2070 775 5340 650 4480 315 203 580 4000 455 3130 455 3130 210 1450 175 12010 214" 146" 3 2162 860 530 1230 8470 1230 8470 325 2240 80 6130 275 0 770 5310 26 1441 1230 8470 1070 7370 315 203 1375 780 65 8030 214" 146" 1230 8470 3 2162 26 1441 655 4510 630 41207 7820 7820 315 203 214" 146" 3 2162 26 1441 7 Allagash International Group, LLC Bulletin 33NE January 2016
ACTUATOR SHUTOFF CAPABILITIES AirtoOpen (Spring to Close) Flow Coefficient Cv/Kv Valve VPort VPort VPort 0.5 0.75" 15mm 20mm 0.25 0.22 2.2 Air supply Psig/KPA Spring Range psig/kpa 315 203 VPort VPort 1265 8720 VPort 55 4100 1265 8720 55 4100 5.5" 381 3 2162 1265 8720 1385 540 55 4100 1265 8720 1385 540 55 4100 10.5 72 315 203 1075 7410 1075 7410 6" 424" 3 2162 1075 7410 1075 7410 1016 60 630 138234 2034" 138234 1423 6158 * These are 315 psig (203kPa) springs set to increase maximum pressure differential Note: These shutoff ratings are the maximum permissible for the specified actuator and spring ranges. Further limitations by the body pressure rating per ANSI B16.5 may occur. For ultralow differentials, see pg 8 Allagash International Group, LLC Bulletin 33NE January 2016
ACTUATOR SHUTOFF CAPABILITIES AirtoOpen (Spring toclose), Continued Flow Coefficient Cv/Kv Valve VPort VPort & 0.5 0.75" 15mm 20mm 6..0 75.8 6.. 10.0 8.6 8.7 12.1 13.7 10.5. 14.2 12.3 6..6 10.0 8.3 8.7 10.5 10.8.1.3 1 14.7.7 12.7 12.7 1 10..7 14.6 16.0 12.6 13.8 Air supply Psig/KPA Spring Range psig/kpa 315 203 VPort 330 2270 VPort 55 4100 VPort & 160 00 160 00 105 723 85 586 5.5" 381 3 2162 810 6680 330 2270 1385 540 55 4100 425 230 160 00 425 230 160 00 300 2070 105 723 255 1760 85 586 10.5 72 480 65 6650 65 470 600 4130 315 203 620 4270 1075 7400 320 2200 320 2200 215 5 1270 6" 424" 3 2162 620 4270 1075 7400 8 6760 320 2200 8 6750 320 2200 580 4000 215 500 3450 5 1270 1016 60 1055 7270 10 6270 630 138234 2034" 138234 05 6240 480 480 340 2340 20 2000 1255 8650 1423 6158 1330 160 * These are 315 psig (203kPa) springs set to increase maximum pressure differential Note: These shutoff ratings are the maximum permissible for the specified actuator and spring ranges. Further limitations by the body pressure rating per ANSI B16.5 may occur. For ultralow differentials, see pg Ultra LowFlow Trim flow coefficients are 0.025, 0.063, 0.16, 0.40 and 1.0 (0.022, 0.055, 0.14, 0., 0. Kv) with a psi (125 kpa) and a spring range of 315 psi (20100kPa). The maximum pressure differential is (kpa). Allagash International Group, LLC Bulletin 33NE January 2016
DIMENSIONS Flanged Ends A B C D Valve Iron 125 Steel 150 7.25 4 Iron 250 Steel 300 7.75 17 Steel 600 8.25 210 Plain Bonn et 25.13 514 AirtoClose All Other Bonnets 26.13 664 Plain Bonnet 21.75 552 AirtoOpen All Other Bonnets 277.7 704 Iron 125 Steel 300 2.13 54 Iron 250 Steel 300 2.43 62 Steel 600 10.56 268 400mm 8.75 222.25 2 20.25 514 26.13 664 21.75 552 277.7 704 64 3.07 78 10.56 268 10.0 254 10.5 267 20.25 514 26.13 664 21.75 552 277.7 704 3.0 75 3.25 83 10.56 268 7.25 4 7.75 17 8.25 210 2 54 27.5 68 24. 610 30.8 782 2.13 54 2.43 62 12.75 324 u 8.75 222.26 2 2 54 27.5 68 24. 610 30.8 782 64 3.07 78 12.75 324 10.0 254 10.5 267 2 54 27.5 68 24. 610 30.8 782 3.0 75 3.25 8.3 12.75 324 Inch/Millimeter D B C A 10 Allagash International Group, LLC Bulletin 33NE January 2016
Allagash International Group, LLC Bulletin 33NE January 2016 DIMENSIONS Threaded Ends Valve A B C D Iron 125 Steel 150 AirtoClose AirtoOpen Steel 600 Plain Bonnet All Other Bonnets Plain Bonnet All Other Bonnets 0.5" 0.75" 15mm 20mm 4.5 4 20.25 514 26.13 664 21.75 552 277.7 704 1.25 32 10.56 268 400mm 6.25 15 20.25 514 26.13 664 21.75 552 277.7 704 3 36 10.56 268 7.0 177 20.25 514 26.13 664 21.75 552 277.7 704 1.7 43 10.56 268 0.5" 0.75" 15mm 20mm 4.5 4 2 54 27.5 68 24. 610 30.8 782 1.25 32 12.75 324 u 6.25 15 2 54 27.5 68 24. 610 30.8 782 3 36 12.75 324 7.0 177 2 54 27.5 68 24. 610 30.8 782 1.7 43 12.75 324 Inch Millimeter
Guarantee to return products or parts for replacement as herein provided, of failure to install, operate, and maintain said products or parts according Factory Service Personnel. All orders accepted shall be deemed accepted subject to this guarantee, which shall be exclusive of any other THE FOREGOING OBLIGATIONS ARE IN LIEU OF ALL OTHER OBLIGATIONS AND LIABILITIES INCLUDING WARRANTIES OF FITNESS OR MERCHANTABILITY OR OTHERWISE, EXPRESSED OR IMPLIED IN FACT OR BY LAW, AND STATE NOR EAST CONTROLS AND EXCLUSIVE LIABILITY AND PURCHASER S EXCLUSIVE REMEDY FOR ANY CLAIM IN CONNECTION WITH THIS SALE OR FURNISHING OF SERVICES, GOODS, OR PARTS, THEIR OWN DESIGN, SUITABILITY FOR USE, INSTALLATION OR OPERATION. 70 Ingersoll Drive, Portland ME 04103. phone 20778831. fax 20778830 ALLAGASHINTERNATIONAL.COM Sales and Service 12 Allagash International Group, LLC Bulletin 33NE January 2016