Thermostatic Radiator Valve Bodies Series V6 - Double Regulating Function ngle Pattern 118 37 63 118 37 64 11.10 11.10 EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x 1.5 Reverse ngle Pattern Double ngle - left Double ngle - right 118 38 63 118 38 64 118 39 63 118 39 64 118 34 60 118 34 62 118 34 61 118 34 63 11.10 11.10 12.20 12.20 14.10 14.10 14.10 14.10 Certified to EN215 djustable Kv Kv (@ 2K P-Deviation) Setting 6 = 0.650 Setting 5 = 0.560 Setting 4 = 0.446 Setting 3 = 0.313 Setting 2 = 0.170 Setting 1 = 0.055 Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. Presetting key for V6 & DV6 118 39 61 2.10 For Compression fittings to suit, see page 6 Series DV6 - Double Regulating & nti-vandal Functions* ngle Pattern 118 81 63 118 81 64 12.50 12.50 F x MU ends. EPDM disk & seals (see note above) Thermostat connection thread M30 x 1.5 Certified to EN215 118 82 63 118 82 64 12.50 12.50 Pumped 2 pipe systems Presetting key for V6 & DV6 118 39 61 2.10 djustable Kv Kv (@ 2K P-Deviation ) Setting 6 = 0.650 Setting 5 = 0.560 Setting 4 = 0.446 Setting 3 = 0.313 Setting 2 = 0.170 Setting 1 = 0.055 * Valve closes to a 5% frost setting if the thermostat is removed. For Compression fittings to suit, see page 6 1
Thermostatic Radiator Valve Bodies Series ngle Pattern 118 00 03 118 00 04 10.20 10.20 EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x 1.5 118 01 03 118 01 04 10.20 10.20 Certified to EN215 Kv = 0.95 (@ 2K P-Deviation ) Reverse ngle Pattern Double ngle - left 118 02 03 118 02 04 118 04 90 118 04 92 10.80 13.20 13.20 Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. Double ngle - right 118 04 91 118 04 93 13.20 13.20 For Compression fittings to suit, see page 6 Series Z - High Capacity for 1 & 2 Pipe Systems ngle Pattern DN25 DN32 118 70 04 118 70 06 118 70 08 118 70 10 13.40 22.60 30.30 EPDM disk & seals (see note above) F x MU ends Thermostat connection thread M30 x 1.5 Certified to EN215 DN25 DN32 Reverse ngle Pattern* Note * - Reverse angle pattern not recommended for TBOE connection on 1 pipe systems 118 71 04 118 71 06 118 71 08 118 71 10 118 72 04 118 72 06 13.40 22.60 30.30 12.30 18.70 Kv =1.1 (@ 2K P-Deviation ) Kvs : 118 70 04 = 3.5 118 70 06 = 3.5 118 70 08 = 3.5 118 70 10 = 4.1 118 71 04 = 1.8 118 71 06 = 2.8 118 71 08 = 3.5 118 71 10 = 4.1 118 72 04 = 2.1 118 72 06 = 2.1 For Compression fittings to suit, see page 6 2
Thermostatic Radiator Valve Bodies Series F - Ultra Low Flow & District Heating Systems ngle Pattern 118 06 03 118 06 04 16.20 16.20 Bronze / brass body, nickel plated EPDM disk & seals ( see note below) F x MU ends. Thermostat connection thread M30 x 1.5 118 07 03 118 07 04 16.20 16.20 Infinitely adjustable Kv Kv (@ 2K P-Deviation ) = 0.01-0.32 Reverse ngle Pattern 118 08 03 118 08 04 17.70 17.70 For Compression fittings to suit, see page 6 Presetting tool for Series F 118 07 91 13.20 Special pplication Thermostatic Radiator Valve Bodies Reverse Flow Valve. For fitting in the return pipe. Reverse ngle Pattern EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x 1.5 - Series - Series 118 00 91 118 00 92 - Series - Series Reverse ngle Pattern - Series V6 - Series V6 118 01 91 118 01 92 118 37 91 118 37 92 1 1 Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. - Series V6 - Series V6 118 38 91 118 38 92 1 1 For Compression fittings to suit, see page 6 Three-way Bypass Valve up to 40% radiator share. - Left handed (shown) 118 05 82 24.40 - Right handed (not shown) 118 05 83 24.40 3
Exclusive Design ward Radiator Valves Series E - Exclusive Thermostatic Radiator Valve Bodies ngle Pattern - nthracite - Nickel* - Chrome - White - Gold - nthracite - Nickel* - Chrome - White - Gold Reverse ngle Pattern - nthracite - Chrome - White 116 30 32 116 30 42 116 30 52 116 30 62 116 30 72 116 31 32 116 31 42 116 31 52 116 31 62 116 31 72 116 32 32 116 32 52 116 32 62 30.30 182.20 30.30 182.20 Brass body, Elegant design with a choice of highly polished finishes * (Nickel plated versions are sand blasted satin finish) EPDM disk & seals (see note below) F x MU ends Thermostat connection thread M30 x 1.5 djustable Kv Kv (@ 2k P-Deviation) Setting 6 = 0.650 Setting 5 = 0.560 Setting 4 = 0.446 Setting 3 = 0.313 Setting 2 = 0.170 Setting 1 = 0.055 Double ngle - Left - nthracite - Chrome - White Double ngle - Right - nthracite - Chrome - White 116 34 32 116 34 52 116 34 62 116 34 33 116 34 53 116 34 63 Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. For "Exclusive" special compression fitting sets refer to page 6 Presetting key for Series E 118 39 61 2.10 Combi E - Exclusive Radiator Lockshield Valves ngle Pattern - nthracite - Nickel* - Chrome - White - Gold 116 60 32 116 60 42 116 60 52 116 60 62 116 60 72 30.30 182.20 Brass body, Elegant design with a choice of highly polished finishes * (Nickel plated versions are sand blasted satin finish) F x MU ends - nthracite - Nickel* - Chrome - White - Gold 116 70 32 116 70 42 116 70 52 116 70 62 116 70 72 30.30 182.20 For "Exclusive" special compression fitting sets refer to page 6 4
Thermostatic Radiator Valves - Bi-directional Combi 3G Radiator Lockshield Valve Manual Radiator Valves Uniset & Uniset Pro Thermostatic Radiator Valves Uniset - Bi-directional Valve with wax (Uni DGH) thermostat 10mm x ½" BSP tail 15mm x ½" BSP tail 118 97 83 118 97 84 Complete Thermostatic Radiator Valve, consisting of Series G angle pattern nickel plated valve body, having compression x ½" BSP union tail reversible ends, and direct acting thermostat in white. To suit copper pipe only Uniset Pro - Bi-directional Valve with liquid (Uni LGH) thermostat 10mm x ½" BSP tail 15mm x ½" BSP tail 118 85 83 118 85 84 13.30 13.30 Fully bi-directional Certified to EN215 Series G valve body only 10mm x ½" BSP tail 15mm x ½" BSP tail 118 85 03 118 85 04 7.90 7.90 Note: For other suitable thermostats and accessories, see Combi 3G - Radiator Lockshield Valve - Compression ended Combi 3G 10mm x ½" BSP tail 15mm x ½" BSP tail 109 83 61 109 83 62 5.90 5.90 ngle pattern nickel plated body having compression x ½" BSP union tail To suit copper pipe only Pumped 2 pipe systems Service tool - to fill & drain 109 05 51 17.30 3 functions - Isolating, Regulating, Filling/Draining. Manual Radiator Valves Series HRV - Double Regulating ngle Pattern 119 15 03 119 15 04 EPDM disk & seals (see note below) White handwheel F x MU ends. Pumped 2 pipe systems 119 16 03 119 16 04 Suitable for later conversion to thermostatic operation. For Compression fittings to suit, see page 6. Series H ngle Pattern DN25 119 00 03 119 00 04 119 00 06 119 00 08 11.40 11.40 16.00 28.70 Note: Mineral oils, including thread cutting oils/greases, will have an adverse effect on any EPDM components, such as valve seals, pump seals and flexible connections, in a pipework system. Therefore it is essential that pipework systems are thoroughly cleaned of any residues, and that the use of water treatments containing mineral oils is avoided. DN25 119 01 03 119 01 04 119 01 06 119 01 08 11.40 11.40 16.00 28.70 5
Demo-Bloc Service Tool Thermostatic Valve Body Inserts Compression Fittings for Radiator Valves Demo-Bloc Service Tool & Valve Inserts Demo-Bloc Service Tools "Demo-Bloc" Service Tool Coupling set for Series HRV manual valves 118 80 51 118 80 92 213.00 23.30 To suit both M30 x 1.5 and M30 x 1.0 valve bodies. For replacing radiator valve inserts under working conditions - without the need to drain the system Cleaning Head 118 84 00 18.00 Valve Inserts* For Series V6 valves 118 70 57 6.40 djustable kv 0.055-0.65 (@ 2K P-Dev) For Series DV6 valves 118 60 01 8.40 djustable kv 0.055-0.65 (@ 2K P-Dev) nti-vandal function For Series Z valves 118 70 60 4.90 Kv 1.1 (@ 2K P-Dev) For Series valves 118 70 69 4.50 Kv 0.95 (@ 2K P-Dev) For Series F valves 118 73 52 djustable kv 0.01-0.32 (@ 2K P-Dev) For Series G valves (Bi-directional) 118 70 70 8.40 Kv 0.45 (@ 2K P-Dev) Insert for steam ( 1 bar max ) 118 62 00 13.70 Note *: ll inserts can be fitted into all thermostatic radiator valve bodies with M30 x 1.5 body to thermostat connection thread Compression Fittings - For Thermostatic & Lockshield Radiator Valves To suit Table X copper tube ½" x 15mm ¾ x 22mm* 101 68 93 102 71 58 1.50 2.30 Brass, nickel plated compression nut For valves with female thread Note *: Not suitable for soft copper tube To suit Copipe tube 14 x 2mm x ½" 150 73 54 150 73 55 3.00 3.20 Compression Fitting Sets - For Series E & Combi E Exclusive Valves ½" x 12mm Nickel* ½" x 15mm Nickel* 116 93 92 116 93 93 6.70 6.70 Required when fitting "Exclusive" Radiator Valves to copper pipe. ½" x 12mm Chrome ½" x 15mm Chrome ½" x 12mm White ½" x 15mm White 116 90 92 116 90 93 116 91 92 116 91 93 12.70 12.70 12.70 12.70 Comprises compression nut, olive and body coloured cap to give a smooth finish. Note *: (Nickel plated versions are sand blasted satin finish) ½" x 12mm Gold ½" x 15mm Gold 116 92 92 116 92 93 27.60 27.60 Note: Not suitable for soft copper tube 6
Thermostats Uni LGH and Uni LH Liquid Filled Thermostats Direct cting Uni LGH - White (shown) 101 85 61 Liquid filled thermostat with connecting thread M30 X 1.5. To suit all Oventrop TRV bodies with M30 x 1.5 thread Uni LH - White (not shown) 101 14 65 12.30 Uni LGH - with UK style graduations Uni LH - Black (not shown) 101 14 67 13.90 Uni LH with German style graduations Uni LH - Gold plated (not shown) Uni LH - Chrome plated (not shown) Remote Sensor Uni LH - White - 2m capillary 101 14 68 101 14 69 101 16 65 PO PO 20.50 Range 7-28 o C. With 0' setting (lso available without 0') Hidden security clips allow limiting and locking of temperature Security clip removing tool available, see page 8 Uni LH - White - 5m capillary 101 16 66 38.30 Uni LH - White - 10m capillary 101 16 67 58.40 Uni LH - Black - 2m capillary 101 16 45 23.20 Remote Control Uni LH - White - 2m capillary 101 22 95 37.80 Uni LH - White - 5m capillary 101 22 96 59.40 Uni LH - White - 10m capillary 101 22 97 81.00 Remote Control with separate remote sensor Uni LH - White - 2m capillaries 101 23 95 70.20 Uni LH - White - 5m capillaries 101 23 96 91.80 Uni XH Liquid Filled Thermostats Direct cting Uni XH - White (shown) 101 13 65 12.30 Liquid filled thermostat with connecting thread M30 X 1.5. To suit all Oventrop TRV bodies with M30 x 1.5 thread Uni XHT - Transparent (not shown) 101 13 00 15.00 Uni XH and Uni XHT have German style graduations Direct cting - nti-vandal Uni XHT is limited to a maximum water temperature of 90 o C Uni XHB - White Uni XHB has an integrated anti tamper and anti vandal facility Remote Sensor Uni XH - White - 2m capillary Uni XH - White - 5m capillary 101 15 65 101 15 66 26.60 40.30 Range 7-28 o C. With 0' setting (lso available without 0') Visible clips allow limiting and locking of temperature. Clips can be removed without the use of a tool. 7
Thermostats Thermostat ccessories Uni DGH & Uni DH - Wax Filled Thermostats Direct cting Uni DGH - White (shown) Uni DH - White (not shown) Uni DH - Chrome plated (not shown) 101 10 61 101 10 65 101 10 69 9.70 10.80 PO Wax filled thermostat with connecting thread M30 X 1.5. Range 7-28 o C Uni DGH with UK style graduations Uni DH with German style graduations Remote Sensor Uni DH - White - 2m capillary (not shown) 101 11 65 20.50 ccessories Security clip removal tool 198 91 00 4.10 Only available as a pack of 5 pieces nti-theft ring, to fit all thermostats & bodies - White 101 17 66 8.10 Only available as a pack of 5 pieces Deco-ring - to conceal thermostat / body connection - White 101 13 93 4.40 Only available as a pack of 5 pieces Reinforcing cap - not lockable - White 101 18 65 5.20 For Uni LGH, Uni LH Reinforcing cap - lockable - White 101 18 66 6.00 For Uni LGH, Uni LH Reinforcing cap - not lockable - White 101 19 11 4.50 For Uni DGH & Uni DG Lockshield cap - White (not shown) 101 19 01 3.60 For Uni DGH & Uni DG Cover for all patterns of remote sensor - White 101 16 98 9.40 Only available as a pack of 5 pieces Manual head for all TRV bodies with M30 x 1.5 connection thread - White 101 25 65 3.30 8
Radiator Lockshield Valves Combi 4 - Radiator Lockshield Valve (with fill & drain facility) ngle Pattern 109 06 61 109 06 62 109 06 63 8.30 8.30 10.50 F X MU ends (other ends available) Pumped 2 pipe systems 4 functions - Isolating, Regulating (with memory), Filling & Draining 109 07 61 109 07 62 109 07 63 8.30 8.30 10.50 For Compression fittings to suit, see page 6. Service tool - to fill and drain 109 05 51 17.30 Combi 2 - Radiator Lockshield Valve (without fill & drain facility) ngle Pattern 109 10 61 109 10 62 109 10 63 7.60 7.60 10.20 F X MU ends (other ends available) Pumped 2 pipe systems 2 functions - Isolating, Regulating (without memory) 109 11 61 109 11 62 109 11 63 7.60 7.60 10.20 For Compression fittings to suit, see page 6. Combi LR - Radiator Lockshield Valve - Suitable for 1 Pipe Systems ngle Pattern DN25 DN32 102 75 64 102 75 66 102 75 68 102 75 70 12.50 15.10 25.10 33.80 F X MU ends (other ends available) Pumped 2 pipe systems lso suitable for 1 pipe systems due to low resistance DN25 DN32 102 76 64 102 76 66 102 76 68 102 76 70 12.50 15.10 25.10 33.80 2 functions - Isolating, Regulating (without memory) For Compression fittings to suit, see page 6. Note: In earlier Catalogues and Price Lists, these items were listed as 109 27 xx and 109 28 xx respectively. 9
Item No. Price / Metre Group Price Information Combi-System Pipes and Fittings Copipe Composition Pipe Copipe Composition Pipe Copipe Composition Pipe Coils Composite pipe - White WRS approved - 14 x 2mm - 100mtr 200mtr 150 10 54 150 01 54 150 02 54 1.40 1.40 1.40 Diffusion tight three layer composition pipe: Inner - Crosslinked polyethylene Middle - Butt welded aluminium Outer - Crosslinked polyethylene DN12-16 x 2mm - 100mtr 200mtr 150 10 55 150 01 55 150 02 55 1.50 1.50 1.50 Maximum Pressures: 10 bar @ 95 o C 16 bar @ 20 o C - 20 x 2.5mm - 100mtr 200mtr 150 10 60 150 01 60 150 02 60 2.40 2.40 2.40-26 x 3mm - 150 10 66 3.60 DN25-32 x 3mm - 150 10 72 5.90 5 metre lengths DN12-16 x 2mm 150 15 55 2.50-20 x 2.5mm 150 15 60 3.30-26 x 3mm 150 15 66 5.00 DN25-32 x 3mm 150 15 72 7.20 DN32-40 x 3.5mm 150 15 80 11.30 DN40-50 x 4.5mm 150 15 82 PO DN50-63 x 6.0mm 150 15 84 PO Copipe Composition Pipe Fitted with 4mm thick anti-condensation protection Coils DN12-16 x 2mm - 150 11 55 3.90-20 x 2.5mm - 150 11 60 5.70 10
Combi-System Pipes and Fittings Cofit P Press-fittings Cofit P Press-fittings Press x male thread - nickel plated 151 20 63 151 20 65 2.70 3.70 Maximum Pressures: 10 bar @ 95 o C 16 bar @ 20 o C Press x male thread - unplated 20 x 2.5mm x ¾" 26 x 3mm x ¾" 32 x 3mm x 1" 40 x 3.5mm x 1¼" 151 20 43 151 20 45 151 20 46 151 20 48 151 20 51 151 20 54 2.60 3.60 3.70 5.70 7.50 11.50 range of fittings in sizes 50mm (DN40) and 63mm (DN50) are also available. Press x collar nut - unplated (spherical seat) 16 x 2mm x ¾" 20 x 2.5mm x ¾" 151 21 63 151 21 65 9.00 10.10 Press x collar nut - unplated (flat seat & gasket) 16 x 2mm x ¾" 20 x 2.5mm x ¾" 26 x 3mm x 1" 32 x 3mm x 1¼" 40 x 3.5mm x 1¼" 151 21 43 151 21 45 151 21 47 151 21 49 151 21 51 8.70 11.70 13.10 18.90 Press x female thread - unplated 26 x 3mm x ¾" 32 x 3mm x 1" 151 22 43 151 22 45 151 22 47 151 22 49 3.20 7.10 10.40 Press x press coupling 16mm x 16mm 20mm x 20mm 26mm x 26mm 32mm x 32mm 40mm x 40mm 151 25 43 151 25 45 151 25 46 151 25 47 151 25 48 3.20 4.50 7.30 8.90 11.70 20mm x 16mm 26mm x 16mm 26mm x 20mm 32mm x 20mm 32mm x 26mm 40mm x 32mm 151 26 55 151 26 56 151 26 57 151 26 59 151 26 60 151 26 64 6.00 8.10 9.80 12.20 Press x male thread elbow 20 x 2.5mm x ¾" 26 x 3mm x ¾" 32 x 3mm x 1" 40 x 3.5mm x 1¼" 151 23 43 151 23 45 151 23 46 151 23 47 151 23 48 151 23 49 4.10 5.90 7.70 8.10 12.60 17.10 Press x female thread elbow 26 x 3mm x ¾" 32 x 3mm x 1" 151 24 43 151 24 45 151 24 47 151 24 49 6.10 8.60 13.60 Note: wide range of additional and special application fittings is also available, please refer to our catalogue. 11
Combi-System Pipes and Fittings Cofit P Press-fittings Cofit P Press-fittings Press x press elbow 16mm x 16mm 20mm x 20mm 26mm x 26mm 32mm x 32mm 40mm x 40mm 151 28 43 151 28 45 151 28 47 151 28 49 151 28 51 6.20 9.10 12.20 17.60 90 o elbow 32mm x32mm 40mm x40mm 151 29 49 151 29 51 14.90 18.20 45 o elbow Press tee 16 x 16 x 16mm 20 x 20 x 20mm 26 x 26 x 26mm 32 x 32 x 32mm 40 x 40 x 40mm 151 30 43 151 30 45 151 30 46 151 30 47 151 30 48 5.90 8.00 11.00 17.80 23.90 equal tee 20 x 16 x 20mm 26 x 16 x 26mm 26 x 20 x 26mm 32 x 16 x 32mm 32 x 20 x 32mm 32 x 26 x 32mm 40 x 20 x 40mm 40 x 26 x 40mm 40 x 32 x 40mm 151 31 55 151 31 56 151 31 57 151 31 58 151 31 59 151 31 60 151 31 62 151 31 63 151 31 64 7.80 9.30 10.40 18.00 18.00 18.00 22.60 22.60 23.40 reduced central port 20 x 20 x 16mm 26 x 26 x 20mm 151 32 55 151 32 57 7.80 10.40 reduced through port 20 x 16 x 16mm 26 x 16 x 20mm 26 x 20 x 20mm 32 x 20 x 26mm 40 x 26 x 32mm 151 33 54 151 33 56 151 33 58 151 33 61 151 33 65 9.10 11.30 11.30 18.00 23.40 reduced central & through ports 16 x 20 x 16mm 20 x 26 x 20mm 26 x 32 x 26mm 151 34 54 151 34 57 151 34 60 7.80 11.30 18.00 enlarged central port 20 x ½" x 20mm 26 x ½" x 26mm 32 x ½" x 32mm 151 36 45 151 36 47 151 36 49 9.10 11.80 17.10 central port female thread Wall mounted connection 90 o elbow 151 70 53 151 70 55 6.00 6.80 short form - press x female thread 151 70 43 151 70 45 6.00 6.80 long form - press x female thread Note: wide range of additional and special application fittings is also available, please refer to our catalogue. 12
Combi-System Pipes and Fittings Cofit S Compression Fittings Cofit S Compression Fittings Compression fitting 14 x 2mm x ½" 14 x 2mm x ¾" 16 x 2mm x ¾" 20 x 2.5mm x ¾" 150 73 54 150 73 55 150 79 54 150 79 55 150 79 60 3.00 3.20 2.70 3.00 3.40 Compression fitting - male thread to suit Oventrop valves with ½" female end(s), and "Copipe". Nickel plated nut Compression fitting - female thread and Eurokonus to suit "Cofit S" fittings below, and Oventrop valves with male threaded ends. Nickel plated nut 14 x 2mm x ¾" 16 x 2mm x ¾" 20 x 2.5mm x ¾" 26 x 3mm x 1" 32 x 3mm x 1¼" 150 79 74 150 79 75 150 79 80 150 79 83 150 79 85 2.60 2.90 3.30 4.60 5.70 With unplated nut Double Nipple ¾" x ¾" 1" x 1" 1¼" x 1¼" 1" x ¾" 1¼" x 1" 1¼" x ¾" 150 40 54 150 40 55 150 40 56 150 40 64 150 40 65 150 40 66 2.60 3.70 5.30 3.30 5.50 5.50 Double Nipple - ends to suit 150 79 fittings Tee piece a x b x c ¾" x ¾" x ¾" 1" x1" x1" 1¼" x 1¼" x 1¼" 150 45 54 150 45 55 150 45 56 4.50 5.20 Tee piece - ends to suit 150 79 fittings 1" x 1" x ¾" 1" x ¾" x1" 1" x ¾" x ¾" ¾" x 1" x ¾" 1¼" x 1¼" x 1" 1¼" x 1" x 1¼" 1¼" x 1" x 1" 1" x 1¼" x 1" 1¼" x 1¼" x ¾" 1¼" x ¾" x 1¼" 1¼" x ¾" x ¾" ¾" x 1¼" x ¾" 1¼" x 1" x ¾" 1¼" x ¾" x 1" 1" x 1¼" x ¾" 150 45 63 150 45 64 150 45 65 150 45 52 150 45 71 150 45 66 150 45 67 150 45 72 150 45 69 150 45 68 150 45 70 150 45 53 150 45 73 150 45 74 150 45 75 5.40 5.40 5.40 5.40 Elbow ¾" x ¾" 1" x 1" 1¼" x 1¼" 150 44 54 150 44 55 150 44 56 4.60 6.00 90 o elbow - ends to suit 150 79 fittings ¾" x ½" F ¾" x ¾" F 1" x 1" F 1¼" x 1¼" F 150 43 53 150 43 54 150 43 55 150 43 56 4.60 6.00 90 o elbow - one end to suit 150 79 fittings & one end female threaded Note: wide range of additional and special application fittings is also available, please refer to our catalogue. 13