Product Information Packet ECP4406T-4 150HP,1785RPM,3PH,60HZ,445T,A4488M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless otherwise noted.
Part Detail Revision: K Status: PRD/A Change #: Proprietary: No Type: AC Elec. Spec: A44WG3335 CD Diagram: 41680-036 Mfg Plant: Mech. Spec: Layout: 61747-001 Poles: 04 Created Date: 08-10-01 Base: Eff. Date: 0-16-018 Leads: 3#1/0 Y Specs Catalog Number: ECP4406T-4 Insulation Class: F Enclosure: TEFC Inverter Code: Inverter Ready Frame: 445T KVA Code: F Frame Material: Iron Lifting Lugs: Standard Lifting Lugs Output @ Frequency: 150.000 HP @ 60 HZ Motor Lead Quantity/Wire Size: 3 @ 1/0 AWG Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ Motor Type: A4488M Voltage @ Frequency: 460.0 V @ 60 HZ Mounting Arrangement: F1 XP Class and Group: None Power Factor: 86 XP Division: Division II Product Family: Other Agency Approvals: CSA EEV Pulley End Bearing Type: Ball Auxillary Box: No Auxillary Box Pulley Face Code: Standard Base Indicator: Rigid Shaft Ground Indicator: No Shaft Grounding Bearing Grease Type: Polyrex EM (-0F +300F) Shaft Rotation: Reversible Constant Torque Speed Range: 15-60 Shaft Slinger Indicator: No Slinger Current @ Voltage: 169.000 A @ 460.0 V Speed Code: Single Speed Design Code: B Motor Standards: NEMA Drip Cover: No Drip Cover Starting Method: Direct on line Duty Rating: CONT Thermal Device - Bearing: NONE (OLD) Page of 14
Feedback Device: NO FEEDBACK Thermal Device - Winding: None Heater Indicator: No Heater XP Temp Code: T3 Page 3 of 14
Nameplate NP338 CAT NO ECP4406T-4 SPEC NO. P44G3930 HP 150 AMPS 169 VOLTS 460 DESIGN B FRAME 445T RPM 1785 HZ 60 AMB 40 SF 1.15 D.E. BRG.DATA 6318 O.D.E. BRG.DATA 6318 PH 3 DUTY CONT INSUL.CLASS F D.E. BRG. 90BC03J30X TYPE P ENCL TEFC CODE F O.D.E. BRG. 90BC03J30X POWER FACTOR 86 NEMA NOM EFFICIENCY 95.8 3/4 LOAD EFF. 96.1 MAX CORR KVAR 30.0 GUARANTEED EFFICIENCY 95.0 TEMP CODE T3 TEMP = 00 CHP HZ 60-90 CT HZ 15-60 VT HZ 0-60 INVERTER-TEMP-CODE T3 SER.NO. MOTOR WEIGHT Page 4 of 14
Nameplate NP496L MOBIL POLYREX EM Page 5 of 14
Parts List Part Number Description Quantity SA49388 SA P44G3930 1.000 EA RA3653 RA P44G3930 1.000 EA 41948051 LABEL, MYLAR 1.000 EA 000613006PU N/P (RELEASE QTY 10,000) UL CSA LABEL 1.000 EA 00069000VD LABEL WARNING 1.000 EA NP338 SS CP XEX SEVERE DUTY MAIN NP 1.000 EA 089490099A G8 BRKT 089490098WCA KB 1.000 EA 41507001B CLAMP 1.000 EA 08319908RA G8 SHORT FAN COVER W/BAFFLE ASSEMBLY 1.000 EA 034180014DA KEY 1/4X1/4X1-3/4 L 1.000 EA 078548001R FAN KB 34/150 (84) 400 1.000 EA 00484015A GREASE POLYREX EM 1.160 LB 0301800FK HHCS 3/4-10X-1/ PLTD. 4.000 EA 03018008CK HHCS 3/8-16X1L PLATED 4.000 EA 03018030DK HHCS 1/-13X3-3/4 PLTD. 3.000 EA 41509600A CPLG 1/8 HEX TYPE 1.000 EA 410700004A WSHR 1.000 EA 034017014AB LCKW 3/8 STD. PLATED 4.000 EA 034530064AB P/NIP 1/8 X 8" L Pipe Nipple 1.000 EA 089490099A G8 BRKT 089490098WCA KB 1.000 EA 0301800FK HHCS 3/4-10X-1/ PLTD. 4.000 EA 03018030DK HHCS 1/-13X3-3/4 PLTD. 3.000 EA 076863000C +CBCST BLKT - 440 1.000 EA 076864000A CBCST BLKT - 440 1.000 EA Page 6 of 14
Parts List (continued) Part Number Description Quantity 415915007G GASK, LAC 1.000 FT 067053001C GASK 440 1.000 EA 03018008DK HHCS 1/-13X1 PLATED 4.000 EA 415000103D T/LUG #4AWG-1/0AWG W/HOLE FOR.50 BOLT 1.000 EA 406099000A PLUG - FAN COVER 30-440 1.000 EA 03351006LB HHTTS 1/4-0X3/4 PLTD. 1.000 EA MG105N19 WILKO 778.50 BLUE GREEN - 55 GAL DRUMS 0.50 GA 033775004EA DRSCR #6-1/4 304 S.S..000 EA 034180054KA KEY 7/8X7/8X6-3/4 L 1.000 EA 034690005AB PPLG 3/4 PLATED.000 EA 0360016LA SOCKET SET SCREW-449 3.000 EA 418151014G RETAIN RING 1.000 EA 03018004BK HHCS 5/16-18X1/ PLATED 3.000 EA 41509600A CPLG 1/8 HEX TYPE 1.000 EA 03018006BK HHCS 5/16-18X3/4 PLATED 3.000 EA 7063013A THERMAL BARRIER -- G8 -- BRACKET MTD 1.000 EA 034017013AB LCKW 5/16 STD. PLATED 3.000 EA 034530044AB P/NIP 1/8X5-1/L GALV. 1.000 EA 00069000FF N/P 1.000 EA 03463100AB BUSH 1/4 TO 1/8 PLTD. 1.000 EA 034530064BB P/NIP 1/4X8 PLATED 1.000 EA 41504500A SLGR 1.000 EA 034530044BB P/NIP 1/4X5-1/L PLT 1.000 EA 03463100AB BUSH 1/4 TO 1/8 PLTD. 1.000 EA Page 7 of 14
406056007A GASKET, 440 1.000 EA 03018008BK HHCS 5/16-18X1L PLATED 4.000 EA 418150003A GREASE FITTING CAP 1.000 EA 035000001A ALFTG 1/8" 1610-BL 1.000 EA 035000001A ALFTG 1/8" 1610-BL 1.000 EA 418150003A GREASE FITTING CAP 1.000 EA 41504500A SLGR 1.000 EA PK5004A09 BASE 48 X 39-1/4 STACK X 4 RUUNER 1.000 EA LB1449 DIV-/NEC WARNING LABEL 1.000 EA 41118006A DRAIN.000 EA NP496L MOTOR LUBE NAMEPLATE 1.000 EA 035000001G GREASE RELIEF FITTING, ALEMITE 317400 1.000 EA 035000001G GREASE RELIEF FITTING, ALEMITE 317400 1.000 EA Page 8 of 14
xt Product Information Packet: ECP4406T-4-150HP,1785RPM,3PH,60HZ,445T,A4488M,TEFC REL. S.O. AMPS E/S FRAME HP TYPE 445LP 150 P 3/60 1785 460 DUTY 169 CONT 40/F 1.15 B F TEFC ROTOR AMB C/ INSUL. S.F. TEST S.O. 0 0 --- ---.098 PERFORMANCE LOAD HP AMPERES RPM NO LOAD 1/4 /4 3/4 4/4 5/4 LOCKED ROTOR PULL UP BREAKDOWN FULL LOAD PHASE/ HERTZ NEMA DESIGN TEST DATE 0 48.9 1800 3.78 0 37.6 68.8 1796 54.3 94. 75.0 97.0 179 75.5 96.0 11 13 1788 83.3 96.1 150 170 1784 86.3 95.8 188 11 1779 87.3 95. SPEED TORQUE RPM TORQUE % FULL LOAD RPM CODE LETTER % POWER FACTOR TORQUE LB.-FT. VOLTS ENCL. STATOR RES.@5 C OHMS (BETWEEN LINES) % EFFICIENCY AMPERES 0 130 57 1041 70 116 511 100 179 80 137 579 1784 100 44 170 Page 9 of 14 AMPERES SHOWN FOR 460. VOLT CONNECTION. IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE REMARKS: TYPICAL DATA NEMA NOMINAL EFFICIENCY = 95.8 PCT. DR. BY CK. BY APP. BY DATE CD CD R. MCELVEEN A-C MOTOR PERFORMANCE DATA A44WG3335-R001 1/18/11 ISSUE DATE 03/14/18 Printed on 3/14/18 17:13 @ bengap01.ba
xt Product Information Packet: ECP4406T-4-150HP,1785RPM,3PH,60HZ,445T,A4488M,TEFC RPM 1785 S.F. 1.15 ROTOR 0 445LP VOLTS 460 NEMA DESIGN B TEST S.O. TYPICAL DATA 150 AMPS 169 CODE LETTER F TEST DATE --- P DUTY CONT ENCLOSURE TEFC STATOR RES.@ 5 C.098 3/60 AMB C/INSUL 40/F E/S 0 REL S.O. FRAME HP TYPE PHASE/HERTZ SPEED IN RPM (4) 1768 177 1776 1780 1784 1788 179 1796 1800 TORQUE IN LB. FT. () 0 400 800 100 1600 000 400 P.F.() & EFF.(3) IN % 0 0 40 60 80 100 AMPS AT 460 VOLTS (1) 0 00 400 600 800 1000 100 AMPS AT 460 VOLTS (1) 0 40 80 10 160 00 40 80 30 4 1 3 NEMA NOMINAL EFFICIENCY = 95.8 PCT. 1 0 00 400 600 800 1000 100 1400 1600 1800 SPEED IN RPM,(FLT = 44 LB. FT.) OHMS (BETWEEN LINES) 0 0 40 60 80 100 10 140 160 180 00 0 HORSEPOWER FL Page 10 of 14 AMPERES SHOWN FOR 460 VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DR. BY CK. BY APP. BY DATE CD CD R. MCELVEEN 1/18/11 A-C MOTOR PERFORMANCE CURVES Printed on 3/14/18 17:13 @ bengap01.baldor.com A44WG3335-R001 03/14/18 ISSUE DATE
xt Product Information Packet: ECP4406T-4-150HP,1785RPM,3PH,60HZ,445T,A4488M,TEFC 10 00 9 8 7 6 5 4 3 100 9 8 7 6 5 4 3 RPM 1785 S.F. 1.15 ROTOR 0 445LP VOLTS 460 NEMA DESIGN B TEST S.O. TYPICAL DATA 150 AMPS 169 CODE LETTER F TEST DATE --- P DUTY CONT ENCLOSURE TEFC STATOR RES.@ 5 C.098 3/60 AMB C/INSUL 40/F E/S 0 OHMS (BETWEEN LINES) REL. S.O. FRAME HP TYPE PHASE/HERTZ TIME IN SEC. MOTOR INITIAL TEMPERATURE: 13C FOR OVERLOAD AND ACC. OVERLOAD 13 C FOR LOCKED-ROTOR LOCKED-ROTOR, 40.C ACCELERATION LOCKED-ROTOR 1 0 9 8 7 6 5 4 3 % FULL LOAD CURRENT 0 100 00 300 400 500 600 700 1 Page 11 of 14 REMARKS: THERMAL LIMIT CURVE NEMA NOMINAL EFFICIENCY = 95.8 PCT. AMPERES SHOWN FOR 460 VOLT CONNECTION, IF OTHER VOLTAGE CONNECTIONS ARE AVAILABLE, THE AMPERES WILL VARY INVERSELY WITH THE RATED VOLTAGE. DR. BY CK. BY APP. BY DATE CD CD R. MCELVEEN 1/18/11 A-C MOTOR PERFORMANCE CURVES A44WG3335-R001 ISSUE DATE 03/14/18 Printed on 3/14/18 17:13 @ bengap01.ba
8 7 6 5 4 3 1 61747-001 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME G445T ABOVE NEMA RATINGS COOLING: FAN COOLED MOUNTING: FOOT INCLUDES 444T FRAME MOUNTING HOLES E E 44.75 1.81.68 13.75 14.9 6.00 6 4.00 6.41 1.75 1.75 8.7 17.87 D 8.36 D 8.5 6.88.875 SQ. KEY 4.4 C 16.17 09.55 3.375 3 6.47 10.99 C 1 8.50.00 8.50 14.50 7.67 4 3.00 LEAD OPENING 4.60 9.00 9.00 18.00.00 1.4 13/16 8 HOLES B 16.50 3.38 B 1.. 3. 4. 5. 6. GROUND HOLES QTY 1 1/-13 TAP; QTY 1 3/8-16 TAP VARIES +.00,-.06 VARIES +.000,-.001 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NOT ENCROACH ON AIR INLET 5 WEIGHT (LBS): 130 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. A SHEET NUMBER 1 OF 61747-001 8 CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.003" T.I.R. TO 5 INCH DIA. 7 6 5 DIMENSIONS ARE IN INCHES; SEE SHEET FOR DIMENSIONS IN MILLIMETERS CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: SHEET NEEDS METRIC FOOT HOLE DIMENSION REV: E VERSION: 05 REVISED: 09::56 06/1/014 TDR: 000000857938 MODEL NO. 61747-001 REF: G445T/444T STD FOOTED SIDE/CENTER C/B BY: RAGRA Material: C 4 3 1 61747-001 A Page 1 of 14
8 7 6 5 4 3 1 61747-001 F DUTY MASTER ALTERNATING CURRENT MOTORS SQUIRREL-CAGE INDUCTION F ENCLOSURE: TOTALLY ENCLOSED FRAME G445T ABOVE NEMA RATINGS COOLING: FAN COOLED MOUNTING: FOOT INCLUDES 444T FRAME MOUNTING HOLES E E 576.1 15.4 6 101.6 1136.5 35 16.7 47.9 349.3 378.8 44.5 44.5 1.4 D 1.3 D 09.6 174.6. SQ. KEY 615.7 C 410.8 09.6 85.7 3 164.3 79.1 C 1 15.9 50.8 15.9 4 3.00 LEAD OPENING 116.8 8.6 8.6 31.5 0.6 8 HOLES 368.3 194.7 457. B 419.1 593.9 558.8 B 1.. 3. 4. 5. 6. GROUND HOLES QTY 1 1/-13 TAP; QTY 1 3/8-16 TAP VARIES +.0,-1.5 VARIES +.00,-.03 ON STANDARD MOTORS THIS IS CONDUIT SIZE. ON XT AND CORROSION PROOF MOTOR THIS IS PIPE TAP. MOTOR WEIGHTS MAY VARY BY 15% DEPENDING ON RATING. OBSTRUCTION MUST NOT ENCROACH ON AIR INLET 5 WEIGHT (KGS): 970 DRIVE END AIR DEFLECTOR IS ONLY INCLUDED WHEN NECESSARY. A SHEET NUMBER OF 61747-001 8 CONDUIT BOX LOCATED ON OPPOSITE SIDE WHEN F-. IF MOUNTING CLEARANCE DETAILS ARE REQUIRED, CONSULT FACTORY. MAXIMUM PERMISSIBLE SHAFT RUNOUT WHEN MEASURED AT END OF STANDARD SHAFT EXTENSION IS.08 MM T.I.R. TO 17 MM DIA. 7 6 5 DIMENSIONS ARE IN MILLIMETERS; SEE SHEET 1 FOR DIMENSIONS IN INCHES CUSTOMER IS RESPONSIBLE FOR DETERMINING THAT MOTOR PERFORMANCE IS SUITABLE IN THE APPLICATION. REV. DESC: SHEET NEEDS METRIC FOOT HOLE DIMENSION REV: E VERSION: 05 REVISED: 09::56 06/1/014 TDR: 000000857938 MODEL NO. 61747-001 REF: G445T/444T STD FOOTED SIDE/CENTER C/B BY: RAGRA Material: C 4 3 1 61747-001 A Page 13 of 14
Page 14 of 14