P L AT F O R M B O D I E S
platform bodies Premium materials, superb craftsmanship and advanced production techniques make Reading platform bodies the preferred choice for every hauling job. Platform body equipped with optional solid bulkhead, ICC bumper and underbox The tough yet versatile Reading platform body is built to handle whatever your job requires. From the fully undercoated and reinforced steel understructure to your choice of side options, every inch of a Reading platform body means business. Acrylic E-coat Priming Reading platforms are immersion primed using this 12-stage process which thoroughly cleans, rinses, and finally primes the steel: First, the platforms proceed through a series of tanks filled with chemical agents which clean the steel. Next, they are thoroughly rinsed free of contaminants. Finally, they are immersed in a tank of electrified primer. High voltage currents literally fuse the paint to every square inch of the steel, even the most hidden or recessed areas. The primer is cured by baking the platforms in high temperature ovens. Benefit: The acrylic e-coat process coats every inch of the steel with a uniform coat of primer. It is the best protection available against rust and corrosion. Top Coat Reading platforms are top coated with a two-component, high gloss black urethane paint. The paint is sprayed on using a sophisticated computer controlled mixing system. Benefit: The mixing system ensures precise coverage for proper coating performance and a high gloss, durable shine. 2
standard features Smooth steel Wood Apitong Steel or Wood Platforms Standard platform options include smooth steel, deck plate steel, or wood flooring Wood platforms of dense southern yellow pine are pressure treated and available in a black or natural finish Heavy duty and extra heavy duty platforms are also available with 1 Apitong hardwood floors (at additional cost). Benefit: Choice of flooring makes the platform adaptable to whatever job you require. Pressure treated wood platforms are less susceptible to damage from rot or termites. Deckplate steel Wood yellow pine (shown painted black) Deeper Reinforced Pockets New pocket design extends from the bottom of the platform rail to the top. This holds optional stake racks or sides firmly in place Each pocket is reinforced with a heavy gauge steel box welded into the side rail Benefit: Design minimizes movement of the stakes/sides. Rattling is significantly decreased. Platform Rails and Standard Lighting Platform rails are roll-formed Platform edges meet at 90 corners Lights are rubber grommeted and have impact resistant reflective lenses Includes wiring harness for clearance, marker, and identification lights (not installed) Benefit: The roll-forming machine produces exact-formed parts with prepunched pocket holes. Recessed lights and impact resistant lenses protect the lights from damage. Reinforced Steel Girder Understructure Two full-length longitudinal sills of formed steel on regular models and structural steel on heavy-duty models and extra heavy-duty models Reinforced front to rear on both sides with multiple gussets Longitudinals and full-width heavy gauge cross members are interlocked and arc welded to the one-piece steel side and end rails*. Benefit: Unsurpassed strength and rigidity to support your heaviest loads. Undercoated Understructure Understructure of platforms are covered with a tough oil-based undercoating which meets all environmental regulations Benefit: An additional layer of rust protection *Note: All factory installed longitudinal sills are located for wide frames. If a different sill location is required, complete chassis information and desired dimensions must be supplied when placing order.
side option packages Stake Bodies Lengths available: -2 platforms Rack heights: 0 for platforms 2 for all other sizes Steel Stake Racks Posts are die formed, and steel slats are roll formed and die crimped Posts are arc welded to slats to form steel stake racks Stake racks for regular and heavy-duty platforms are made with 1-gauge steel posts and 1-gauge steel slats. Extra heavy duty and outside stake pocket platforms have racks made with 12-gauge steel posts and 16-gauge steel slats Each stake rack is reinforced at its base for extra strength at, and above, the floor line Regular duty platforms have 0 high racks with three horizontal slats. All other platforms have 2 high racks with four horizontal slats. All racks are spaced on 2 centers. Stake racks feature acrylic e-coat immersion priming for protection against rust and corrosion Available in black, white, or prime paint. Wood slats are also available in 1 x6 (nominal) dense southern yellow pine with a clear finish or black enamel If factory-finished in black or white, the stake racks feature a powder coat topcoat. In this process electrically charged paint powder is applied to the racks. The racks then move through a baking oven which melts the powder and provides a smooth, glossy, chip-resistant finish. Benefit: Reading racks provide safe, secure support for your load. They are built without compromise, and feature the best protection available against rust, corrosion, and the rigors of daily use. Quick Release Latches: A spring-loaded latch on one post of each rack holds it firmly in the stake pocket. To remove rack, simply trip the latch and lift the rack. All racks lift out individually for easier loading and unloading. Each rack section is secured to the adjoining section by a sturdy quick release gate latch. Model shown features optional ICC bumper (above) Stake racks passing through the powder coat system. (right) Detail of quick release latch. (bottom) Cutaway showing the spring loaded latch mechanism.
side option packages Designed for the professional that hauls loose loads, Reading offers landscape sides, or our new Redi-Racks. Both packages feature A-60 galvannealed steel construction and Reading s exclusive acrylic e-coat immersion priming. A black powder coat finish forms a tough, but attractive outer shell that further enhances the layers of protection already applied to the steel. Landscape sides and Redi-Racks are further protected by a three-year limited warranty. Landscape Sides Available in lengths from 9 to 1 ft., Reading s landscape sides feature a flexible bolt-together design (with stainless steel hardware) for easy installation of landscape sides to Reading s standard heavy duty platforms. Landscape sides are constructed of 12 and 1 gauge two-sided A-60 galvannealed steel Lengths available: 9-1 platforms Sides: Available in heights of 2 and 50 Model shown features optional ICC bumper, REV-PAC, and cab guard Side Access Door (curbside): Reinforced 1 gauge, two sided, A-60 galvannealed steel, heavy duty, full opening door 51 clear door opening width Rear Cargo Doors: 1 gauge, two sided, A60 galvannealed steel, perforated and reinforced Single spring loaded latch secures rear doors to tailgate Tailgate: -way double hinged lower tailgate, fully welded and reinforced 12 gauge, two sided, A60 galvannealed steel NEW side option package! Redi-Racks Redi-Racks provide the ability to haul loose bulk loads without the weight of solid sides. By releasing a spring loaded rack lock and an upper rack connector, the forward side racks can be removed individually in order to load a pallet of materials. Equipping your regular or heavy duty Reading platform body with Redi-Racks will provide you with an effective, economical, and versatile solution for your needs. Model shown features optional ICC bumper and REV-Pac, cab protector, and tarp cover Lengths available: 9-2 platforms Rack heights: 2 1 gauge A60 two sided galvannealed steel posts with 16 gauge perforated sides Grab handle bar on outside of Redi- Rack aids in lifting rack and can be used as a tarp tie-down Equipped with swing out gates at rear. Gates feature an upper rack connector, a spring loaded rack lock and hold backs for keeping the racks in a fullyopen position. Separate literature with complete specifications for these products is also available. Call Reading at 00-5-2226 or visit us online at www.readingbody.com. 5
side option packages Contractor Sides All-steel Reading contractor bodies utilize the same platform and understructure as the heavy duty stake bodies. They are available in lengths from 9 to 20 feet, with a choice of pressure-treated wood or steel floors. The removable contractor sides are constructed of 1 high 12 gauge steel. The solid bulkhead is standard with the contractor body. Optional window is available at additional cost. Lengths available: 9-20 Sides: 1 tall Reading contractor bodies feature a -way double-hinged tailgate, fully welded and reinforced. Converts easily to all purpose platform or flat dump. Note: If hoist is used, front bulkhead and sides must be permanently secured to body. -way double-hinged tailgate Contractor Sides* Fold-Down Contractor Sides* Model Approx. Wt. Model Approx. Wt. Close it for hauling. Open level to extend platform. CS9 0# CS10 50# CS12 70# CS1 500# CS16 50# CS1 600# CS20 670# FDCS9 70# FDCS10 90# FDCS12 51# FDCS1 556# FDCS16 59# FDCS1 672# FDCS20 750# Lower 10 for unloading. Open from bottom for dumping. *Includes 1 sides, 1 -way tailgate, and 2 solid bulkhead. *Includes 1 fold-down sides, 1 -way tailgate, and 2 solid bulkhead. Platform-Toolbox Combination This versatile unit is a contractor body and equipment carrier in one. Tools and equipment are carried in lockable toolbox compartments, safe from weather and theft (See Reading Pickup Accessories brochure for specifications). Shelf with bin dividers adjustable on 2 centers is optional at additional cost. The open cargo area transports any loose or solid cargo on its smooth or deckplate steel or wood floor. 6 Model shown equipped with optional steel underbox, solid front bulkhead, and contractor style tailgate.
also available The Versatile Redi-Dek Replace an ordinary pickup bed with Reading s Redi- Dek. The Redi-Dek features a permanently mounted slotted bulkhead, outside stake rack pockets, and tiedown rails. The rear of the body features a safety treadplate steel-covered reinforced apron. Cutouts in the apron allow for the easy remounting of the original chassis stop, tail and turn signal lights. When equipped with the ball hitch option, the versatile Redi- Dek can also pull gooseneck trailers. (Left) optional ball hitch access door Lengths available: 7-12 Outside stake rack pockets on both sides and rear allow for full utilization of the platform floor Rack pockets are reinforced with 2 x 1 flat bar tie down rails for securing loads Slotted bulkhead for visibility Bulkhead is permanently mounted Side gussets extend the top of the bulkhead for carrying long items Body parts are integrated to form a single unit Steel floor with 1 safety tread plate Safety tread plate steel reinforced rear apron with cut-outs to re-mount original chassis stop/tail/turn signals Pre-punched light holes for clearance and marker lights (lights included) Recessed license plate mounting bracket Protected by acrylic e-coat immersion priming Longitudinal sills are undercoated Finished in two component high gloss black urethane top coat paint Model Understructure B Crossmembers Cab-to Approx. Longitudinal Sills* Side Rear A B C Axle wt./lbs. DKS-7SW** 2 5 per DKS-SW** DKD-DW DKS-9SW** DKD-9DW Stake Rack Pockets 2 5 per 2 5 per DKD-10DW*** 2 6 5 per DKD-11DW 2 7 6 per DKD-12DW 2 7 6 per *Gusseted to crossmembers **Chassis cab requires cab roof marker lights ***NOTE: 10 Redi-Dek not recommended for Ford chassis with rear mounted fuel tank NOTE: all factory installed longitudinal sills are located for frame width. If a different location is required, desired dimensions must be given when placing an order. 6 16 1 1 5 5 0 to 2 695# 9 16 1 1 5 5 56 755# 9 16 91 1 95 5 56 5# 110 16 1 1 5 5 60 25# 110 16 91 1 95 5 60 920# 122 16 91 1 95 5 95# 1 16 91 1 95 5 109# 16 16 91 1 95 5 115# DKS Single wheel model DKD Dual wheel model Rear view Side view " 2 " " 16" C A " 11" 7
platform options Optional Bulkheads 90 " 90 " 90 " 2" 5 " Solid: 12 gauge bulkhead with 1 gauge posts. Optional window (10 x 20 or 19 5 x 2 *) available at additional cost. Also available in 0, & 52 heights. 95 " 2" 2 " 2 5 " 11" Solid Long Sill Reinforced: 12 gauge bulkhead with 1 gauge posts, having 2 center posts extending down along side of platform long sills. Optional window (10 x 20 or 90 19 5 x 2 *) available 1/" at additional cost. Also available in, 52 & 60 heights. 90 " 2" 5 " 1 " Solid Winged: 12 gauge bulkhead with 1 gauge posts. Wings provide additional support to bulkhead. Optional window (10 x 20 or 19 5 x 2 *) available at additional cost. Also available in & 52 heights. 2 " 2 90 " 21" 26 " 5 " 2" 2" 2" 2" 12 " 6" Extra Heavy Duty 10 gauge bulkhead with six posts of.1# structural steel channel. Optional 11 x 27 window available at additional cost. Bulkhead is available for extraheavy duty stake bodies and OEH models 90 wide. Also available in, 52, & 60 heights. 5 " Expanded Metal Screen 1 gauge posts on regular and heavy duty models (left). Bulkhead for extra-heavy duty stake bodies is 95 wide with six posts of.1# structural steel channel (right). This model is also available for OEH models 90 wide. Screen height is 2 on all models. Also available in, 52, & 60 heights. *19 5 x 2 windows are available in a single or triple window configuration (triple shown in solid winged illustration) Optional Equipment 6" 7_ 12 " Deck overlay Deckplate or smooth steel overlay, over wood floor platforms. Overlay is 1 for regular duty platforms, and 16 for heavy duty platforms. Heavy duty tie down rings recessed in floor. Lift-up swing-out hinges allow optional racks to swing open without removing. Rear swing-out racks give you ease of access to the cargo area of your Reading platform body. This heavy duty design permits the free opening of the rear racks without lifting them out of the stake pockets. ICC bumper Possum belly compartment 10 ft. long storage tunnel under platform and between long sills. Access is available through a rear hinged door. Also available on special order: Oxygen and acetylene bottle storage compartments Extra cross-members (12 centers)
auxiliary equipment The REV-PAC Model No. Two additional compartments, see C Model No. 2 16 52 16 D E D E Auxiliary storage for any platform body or dump truck. Mounts neatly between the truck body and cab. Features a full bed width compartment with two shelves and four swivel hooks, and is wide enough to carry shovels, brooms or other long handled items. Equipped with the Dual Pro seal system which protects the compartment interiors from the elements with both mechanical and automotive rubber door seals. Constructed of two-sided zinc coated A60 galvannealed steel. Reading s acrylic e-coat immersion priming. Full length concealed pins with bolt-on stainless steel hinges for smooth compartment door operation in all weather conditions. Complete polished stainless steel rotary locks. Lock cylinders guaranteed for life to original owner. Nitrogen strut door holders on all vertical doors with internal dampeners. Approx. Compartment Clear Door Openings Model No. A B C D E Weight 17 x 22 5 17 x 1 1 x 7 1 29 1 2 55 65# 2 17 x 22 5 17 x 1 29 1 2 55 557# -555* 17 x 7 17 x 1 1 x 7 1 6 1 2 712# 2-555* 17 x 7 17 x 1 6 1 2 62# *C500-C5500 GM chassis only Underboxes Reading s sturdy steel and aluminum underboxes add secure storage space to platform, stake, and dump bodies and trailers. Underbox height 1, depth 1 Model # Length Approx. Ship Wt. U-20 20 7# U-2 2 57# U-0 0 6# U-6 6 7# U- 92# U-60* 60 112# *Equipped with two locks. Model # Length Approx. Ship Wt. ALU-20 20 25# ALU-2 2 0# ALU-0 0 5# ALU-6 6 0# ALU- 55# ALU-60* 60 65# *Equipped with two locks. Steel Underboxes: 1 gauge two-sided zinc coated A-60 galvannealed steel construction. Electric welding for maximum durability. Rotary action rivet-on locks have lock cylinders guaranteed for life to original owner and feature adjustable striker pins. Full length concealed hinge pins with bolt-on stainless steel hinges for smooth operation in all weather conditions. Acrylic e-coat immersion priming for maximum protection against rust and corrosion. Powder coating offers a high gloss, chip resistant finish (black is standard, white is available at no additional cost). Three year limited warranty. Aluminum Underboxes: Heavy.06 thick aluminum diamond plate with reinforced base and upper corners to accept heavy loads and give added support for mounting. Tig welding for maximum durability. Slam action rivet-on locks have lock cylinders guaranteed for life to original owner and feature adjustable striker plates. Locks are stainless steel. Full length concealed hinge pins with bolt-on stainless steel hinges for smooth operation in all weather conditions. Flange-mounted automotive rubber door seal. Die formed radius rubrail. 9
platform models Regular Duty Platforms Ideal for local deliveries and use by special trade contractors. Models SR & R All illustrations are based on a 12 platform Heavy Duty Platforms Built to handle heavier and longer loads associated with municipal operation and construction. Models H (left) and OH (right) Front Front Front Regular Duty Platform Heavy Duty Platform Heavy Duty Platform with outside stake pockets Twin longitudinal sills of 6 11 gauge roll-formed G channels. 12 gauge roll formed G channel cross members are spaced on 19 centers (average). 5 high outer rails are roll formed of 11 gauge steel. Each stake pocket is reinforced with a 12 gauge steel box welded into the rails. Longitudinal sills of structural steel channel ranging from 6.2# to 11.5#. Cross members are of 11 gauge roll formed G channel on 15 centers (average). 5 high rails are roll formed of 11 gauge steel. Each stake pocket is reinforced with a 12 gauge steel box welded into the rails. Outside stake pockets allow full utilization of the platform floor. The outside side rails are reinforced with a 2 x steel tie bar for securing loads. Extra Heavy Duty Platforms Extra tough, designed for continued rugged service. Models EH (left) and OEH (right) Extra Heavy Duty Platform Front Extra Heavy Duty Platform with outside stake pockets Front Structural steel channel long sills range from 7 9.# to 11.5#. Cross members are of structural steel channels on 12 centers. 6 high outer rails are die-formed of 7 gauge steel. Each stake pocket is reinforced with a 10 gauge steel box welded into the side rails and will accept a 2 x stake. FRONT Outside stake pockets allow full utilization of the platform floor. The outside side rails are reinforced with a 2 x steel tie bar for securing loads. platform specifications REGULAR DUTY PLATFORMS 10 SIZE MODEL CAB-TO- AXLE FLOOR TYPE Note: We do not recommend installing hoists under regular duty stake bodies. *Chassis cab requires cab roof marker lights APPROX. WT/LBS. PLATFORM RACK WIDTH * SRP 56 11 Ga. Smooth Steel 59 250 6 SRD 56 1/ Deck Plate 602 250 SRW 56 2 (nominal) Wood 65 250 9 * SR9P 60 11 Ga. Smooth Steel 610 20 6 SR9D 60 1/ Deck Plate 60 20 SR9W 60 2 (nominal) Wood 525 20 RP 56 /16 Smooth Steel 705 295 96 RD 56 1/ Deck Plate 615 295 RW 56 2 (nominal) Wood 610 295 9 R9P 60 /16 Smooth Steel 795 0 96 R9D 60 1/ Deck Plate 695 0 R9W 60 2 (nominal) Wood 690 0 10 R10P 60-72 /16 Smooth Steel 5 60 96 R10D 60-72 1/ Deck Plate 770 60 R10W 60-72 2 (nominal) Wood 765 60 SIZE MODEL CAB-TO- AXLE FLOOR TYPE APPROX. WT/LBS. PLATFORM RACK WIDTH 12 R12P /16 Smooth Steel 1,065 90 96 R12D 1/ Deck Plate 90 90 R12W 2 (nominal) Wood 925 90 1 R1P 102-10 /16 Smooth Steel 1,20 55 96 R1D 102-10 1/ Deck Plate 1,05 55 R1W 102-10 2 (nominal) Wood 1,00 55 16 R16P 11-126 /16 Smooth Steel 1,20 590 96 R16D 11-126 1/ Deck Plate 1,20 590 R16W 11-126 2 (nominal) Wood 1,25 590 1 R1P 120-12 /16 Smooth Steel 1,600 60 96 R1D 120-12 1/ Deck Plate 1,00 60 R1W 120-12 2 (nominal) Wood 1,195 60 Model Number Coding System Model Prefix: SR Single Wheel Regular R Regular H Heavy Duty Floor Types: P Smooth Steel D Deck Plate Steel W Wood
platform specifications HEAVY DUTY PLATFORMS APPROX. WT/LBS. PLATFORM RACK WIDTH 9 H9P 60 /16 Smooth Steel 1,075 75 96 H9D 60 /16 Deck Plate 1,155 75 H9W 60 2 (nominal) Wood 0 75 10 H10P 60-72 /16 Smooth Steel 1,160 10 96 H10D 60-72 /16 Deck Plate 1,25 10 H10W 60-72 2 (nominal) Wood 5 10 12 H12P /16 Smooth Steel 1,95 90 96 H12D /16 Deck Plate 1,90 90 H12W 2 (nominal) Wood 1,065 90 1 H1P 102-10 /16 Smooth Steel 1,620 55 96 H1D 102-10 /16 Deck Plate 1,75 55 H1W 102-10 2 (nominal) Wood 1,225 55 16 H16P 11-126 /16 Smooth Steel 1,50 50 96 H16D 11-126 /16 Deck Plate 1,990 50 H16W 11-126 2 (nominal) Wood 1,55 50 1 H1P 120-12 /16 Smooth Steel 2,00 60 96 H1D 120-12 /16 Deck Plate 2,200 60 H1W 120-12 2 (nominal) Wood 1,50 60 20 H20P 17-19 /16 Smooth Steel 2,25 695 96 H20D 17-19 /16 Deck Plate 2,10 695 H20W 17-19 2 (nominal) Wood 1,665 695 22 H22P 16-15 /16 Smooth Steel 2,60 760 96 H22D 16-15 /16 Deck Plate 2,655 760 H22W 16-15 2 (nominal) Wood 1,5 760 2 H2P 165-192 /16 Smooth Steel 2,690 20 96 H2D 165-192 /16 Deck Plate 2,900 20 H2W 165-192 2 (nominal) Wood 2,005 20 EXTRA HEAVY DUTY PLATFORMS 16 EH16P 11-126 /16 Smooth Steel 2,50 0 96 EH16D 11-126 /16 Deck Plate 2,670 0 EH16W 11-126 2 (nominal) Wood 2,065 0 1 EH1P 120-12 /16 Smooth Steel 2,790 0 96 EH1D 120-12 /16 Deck Plate 2,950 0 EH1W 120-12 2 (nominal) Wood 2,20 0 20 EH20P 17-19 /16 Smooth Steel,055 520 96 EH20D 17-19 /16 Deck Plate,225 520 EH20W 17-19 2 (nominal) Wood 2,0 520 22 EH22P 16-15 /16 Smooth Steel,55 560 96 EH22D 16-15 /16 Deck Plate,555 560 EH22W 16-15 2 (nominal) Wood 2,70 560 2 EH2P 165-192 /16 Smooth Steel,670 610 96 EH2D 165-192 /16 Deck Plate,0 610 EH2W 165-192 2 (nominal) Wood 2,95 610 Model Prefix H EH Heavy Duty Extra Heavy Duty HEAVY DUTY PLATFORMS W/ OUTSIDE STAKE POCKETS SIZE MODEL CAB-TO- APPROX. WT/LBS. AXLE FLOOR TYPE PLATFORM RACK WIDTH 12 OEH12P /16 Smooth Steel 1,915 50 96 OEH12D /16 Deck Plate 2,010 50 OEH12W 2 (nominal) Wood 1,55 50 CAB-TO- SIZE MODEL AXLE FLOOR TYPE 9 OH9P 60 /16 Smooth Steel 1,075 75 96 OH9D 60 /16 Deck Plate 1,155 75 OH9W 60 2 (nominal) Wood 0 75 10 OH10P 60-72 /16 Smooth Steel 1,160 10 96 OH10D 60-72 /16 Deck Plate 1,25 10 OH10W 60-72 2 (nominal) Wood 5 10 12 OH12P /16 Smooth Steel 1,95 90 96 OH12D /16 Deck Plate 1,90 90 OH12W 2 (nominal) Wood 1,065 90 1 OH1P 102-10 /16 Smooth Steel 1,620 55 96 OH1D 102-10 /16 Deck Plate 1,75 55 OH1W 102-10 2 (nominal) Wood 1,225 55 16 OH16P 11-126 /16 Smooth Steel 1,50 50 96 OH16D 11-126 /16 Deck Plate 1,990 50 OH16W 11-126 2 (nominal) Wood 1,55 50 1 OH1P 120-12 /16 Smooth Steel 2,00 60 96 OH1D 120-12 /16 Deck Plate 2,200 60 OH1W 120-12 2 (nominal) Wood 1,50 60 20 OH20P 17-19 /16 Smooth Steel 2,25 695 96 OH20D 17-19 /16 Deck Plate 2,10 695 OH20W 17-19 2 (nominal) Wood 1,665 695 22 OH22P 16-15 /16 Smooth Steel 2,60 760 96 OH22D 16-15 /16 Deck Plate 2,655 760 OH22W 16-15 2 (nominal) Wood 1,5 760 2 OH2P 165-192 /16 Smooth Steel 2,690 20 96 OH2D 165-192 /16 Deck Plate 2,900 20 OH2W 165-192 2 (nominal) Wood 2,005 20 EXTRA HEAVY DUTY PLATFORMS W/ OUTSIDE STAKE POCKETS CAB-TO- SIZE MODEL AXLE FLOOR TYPE SIZE MODEL CAB-TO- APPROX. WT/LBS. AXLE FLOOR TYPE PLATFORM RACK WIDTH 12 EH12P /16 Smooth Steel 1,915 50 96 EH12D /16 Deck Plate 2,010 50 EH12W 2 (nominal) Wood 1,55 50 1 EH1P 102-10 /16 Smooth Steel 2,205 90 96 EH1D 102-10 /16 Deck Plate 2,0 90 EH1W 102-10 2 (nominal) Wood 1,0 90 1 OEH1P 102-10 /16 Smooth Steel 2,205 90 96 OEH1D 102-10 /16 Deck Plate 2,0 90 OEH1W 102-10 2 (nominal) Wood 1,0 90 16 OEH16P 11-126 /16 Smooth Steel 2,50 0 96 OEH16D 11-126 /16 Deck Plate 2,670 0 OEH16W 11-126 2 (nominal) Wood 2,065 0 1 OEH1P 120-12 /16 Smooth Steel 2,790 0 96 OEH1D 120-12 /16 Deck Plate 2,950 0 OEH1W 120-12 2 (nominal) Wood 2,20 0 20 OEH20P 17-19 /16 Smooth Steel,055 520 96 OEH20D 17-19 /16 Deck Plate,225 520 OEH20W 17-19 2 (nominal) Wood 2,0 520 22 OEH22P 16-15 /16 Smooth Steel,55 560 96 OEH22D 16-15 /16 Deck Plate,555 560 OEH22W 16-15 2 (nominal) Wood 2,70 560 2 OEH2P 165-192 /16 Smooth Steel,670 610 96 OEH2D 165-192 /16 Deck Plate,0 610 OEH2W 165-192 2 (nominal) Wood 2,95 610 OH Heavy Duty with Outside Stake Pockets OEH Extra Heavy Duty with Outside Stake Pockets APPROX. WT/LBS. PLATFORM RACK WIDTH 11
More Quality Reading Products Reading Aerotech II Service Bodies Reading Pickup Accessories Reading Classic II Service Bodies Reading Steel Force Reading Ready Vans Reading Van Accessories Reading Pickup Caps Sold and serviced locally by: EXPECT MORE. CHOOSE READING. Please note that some items shown in photographs are optional. Reading, Classic, and Aerotech are registered trademarks and Redi-Dek is a trademark of Reading Truck Body, Inc. in the United States and some foreign countries. 2005 Reading Truck Body, Inc. All dimensions subject to plus or minus tolerance of 1/ and all dimensions and specifications are subject to change without notice RBW05-017STB 7/05 15M-6205 (00) 5-2226 (610) 775-01 FAX (610) 775-261 www.readingbody.com Reading Truck Body, Inc. P.O. Box 650, Shillington, PA, USA 19607-0650