COMPLETE PROFILE EXTRUSION PLASTIC LUMBER MANUFACTURING AND PLASTIC RECYCLING FACILITY INCLUDING (12) EXTRUSION LINES TO 6, GRINDERS TO 150-HP, MATERIAL HANDLING EQUIPMENT, FORK LIFTS, SHOP AND SUPPORT EQUIPMENT See Instructions on Page 2 To Become a Qualified Bidder on the Internet Plant Closed ECO-TECH PLASTICS, LLC 1956 (for GPS use 6455) S. Pine Street Burlington, Wisconsin 53105 60 Miles North of Chicago 30 Miles Southwest of Milwaukee SALE DATE: THURSDAY, MAY 28TH, STARTING AT 9:00 AM INSPECTION: WEDNESDAY, MAY 27TH FROM 10:00 AM TO 4:00 PM Late Model Downstream Equipment (13) Extrusion Lines from 6 to 2-1/2 and 400-HP by PTI, Davis, NRM and Others (2) Vecoplan Shredders to 75-HP (to 2004) 150-HP and 125-HP Central Grinders CINCINNATI INDUSTRIAL auctioneers appraisers since 1961 Sale Under The Management Of Cincinnati Industrial Auctioneers 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760 cia-auction.com info@cia-auction.com 70 MM PFEX Model PH-250-H1010100 Extruder In Conjunction with, Technical Advisors 847-956-7300 www.arlingtonmachinery.com
THURSDAY, MAY 28TH 4.5" PTI Model 4.5-200 Extruder 3.5" HPM Model 3.5TMC-30 Extruder 6.0" PTI Model 6.0-400 Extruder 3.5" Sterling Model 3-1/2 30:1 Extruder EXTRUSION LINES 6.0 PTI Model 6.0-400 Extruder; S/N 1621, Air Cooled, 400-HP, 24:1 14 x 10 Conair Gatto Vacuum Sizing Tank 18 x 66 Conair Gatto Cleated Belt Puller Conair Gatto Automatic Upacting Saw 6 Davis Standard Thermatic 60T Extruder; 150 HP 4.5 PTI Model 4.5-200 Extruder; S/N 1351, Air Cooled, 200-HP (2) 14 x 20 and (1) 14 x 12 Vacuum Sizing Tanks 14 x 54 Conair Gatto Model 206-12C Cleated Belt Puller Conair Model UC-7-24 Automatic Upacting Saw 4.5 NRM Model 4-1/2-PMIII Extruder; S/N 16042, 32:1 L/D Ratio, Air Cooled, 7-Barrel Zones 24 x 12 Vacuum Sizing Tank 10 x 11 Royal Model 089 3- Lane Cleated Belt Puller; S/N 617102 (2001) CDS Model CTS-4-24-14 Automatic Upacting Saw; S/N 060304 (2003) 3.5 PTI Model 3.5-100 Extruder; S/N 1351, Air Cooled, 100 HP 14 x 12 Vacuum Sizing Tank Conair Gatto Model 210-8P Cleated Belt Puller Conair Automatic Upacting Saw 3.5 Berlyn Model 3-1/2 Ext 30:1 Extruder; S/N 077G818, 30:1 L/D Ratio 20 x 12 Vacuum Sizing Tank 3.5" PTI Model 3.5-100 Extruder WEBCAST BIDDER INSTRUCTIONS All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale Date, if you do not you will not be approved. All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000.00 Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period. (3) Late Model Conair Cleated Belt Pullers (13) Cleated Belt Pullers To 10 W X 60 L 10 x 11 Royal Model 089 3-Lane Cleated Belt Puller (7) Conair Gatto Cleated Belt Pullers
ECO-TECH PLASTICS, LLC 6 Davis Standard Thermatic 60T Extruder 4.5" NRM Model 4-1/2-PMIII Extruder Conair Gatto Model 207-6PC/30 Cleated Belt Puller Conair Model MST8 Automatic Upacting Saw 3.5 HPM Model 3.5TMC- 30 Extruder; S/N 93097, 100 HP (1993) 14 x 12 Vacuum Sizing Tank 12 x 48 Conair Model PC- 12-60SP Cleated Belt Puller 28 Dia. x 15-HP Chop Saw 3.5 HPM Model 3.5TMC- 30 Extruder; S/N 91518, 100 HP (1991) 14 x 12 Vacuum Sizing Tank Conair Gatto Model 207-6PC-48 Cleated Puller Conair UC-7-24 Automatic Upacting Saw 3.5 Prodex Type 3545-24 Extruder; S/N 1688, Updated Temperature Controls, 125-HP, Air Cooled Barrel 28 Vacuum Sizing Tank 12 x 60 Conair Cleated Belt Puller CDS MST-8 Automatic Upacting Saw 3.5 Sterling Model 3-1/2 30:1 Extruder; S/N 35806, 75-HP 14 x 12 Vacuum Sizing Tank 6 x 36 RDN Model 130-6A Belt Puller 3.5 Welex Model 350-30 Extruder; S/N 200, Air Cooled, 100-HP, 30:1 L/D Ratio 14 x 12 Vacuum Sizing Tank Conair Gatto Model 210-8 Puller 12 Brabor Automatic Saw 70 MM PFEX Model PH- 250-H1010100 Extruder; S/N 911001B, 24:1 L/D, Air Cooled, 4-Barrel Zones, 50 HP AC Motor, Barber Colman Temp Controls 14 x 12 Gatto Tank 7 x 36 Conair Gatto Cleated Puller 20 Brabor Automatic Saw 2.5 NRM Extruder; Air Cooled, 24:1 L/D Ratio, 4- Barrel Zones, 3-Die Zones, 50- HP Baldor Motor, Reliance Drive 14 x 12 Conair Gatto Vacuum Sizing Tank Gatto Model 207-6PC/30 Cleated Puller 15 Brobar Inline Saw EXTRUSION LINES WILL BE SOLD PIECEMEAL 3.5" Berlyn Model 3-1/2 Ext 30:1 Extruder 2.5" NRM Extruder CDS Model CTS-4-24-14 Automatic Upacting Saw (10) Conair Gatto 12 Vacuum Sizing Tanks (13) Vacuum Sizing Tanks To 24 W X 20 L (15) Upacting Saws (5) Late Model Conair Upacting Saws
THURSDAY, MAY 28TH NEW 2004 75-HP Vecoplan Type RG-52/75/SPK Central Shredder 150-HP AM Industries Model 1128A200 Central Grinder Approx. 125-HP Rapid Model 2442 Central Grinder GRINDERS / SHREDDERS 75-HP Vecoplan Type RG- 52/75/SPK Central Shredder; S/N 7666010, PLC Control (2004) 50-HP Vecoplan Type VAZ-200 Central Shredder; S/N 11983/90, Motor Needs Rebuild (1990) 150-HP AM Industries Model 1128A200 Central Grinder; S/N A7501007-1, 20 X 48 Opening 24 X 20 Long Rubber Belt Incline Conveyor 10 HP Blower and Cyclone Approx. 125-HP Rapid Model 2442 Central Grinder; 24 X 42 Opening 22 X 20 Rubber Belt Incline Conveyor 10 HP Blower and Cyclone 15 HP Foremost Model HD6 Grinder Various Grinder Blades, Cyclones, Blowers and Pumps MATERIAL HANDLING / DRYING EQUIPMENT Una-Dyn Central Blending and Drying System Consisting of; Model Hi- Cap Blender; S/N 121953.01-0594, Model HD-40 Hopper Dryer, (2) Large Insulated Hopper Dryers 4 X 4 X 4 Una-Dyn Material Separator with Gaylord Dumper and Blower (2) Large Whitlock Central Dryers Conair 52 X 84 High Insulated Dryer Hopper Novatec 48 x 96 High Insulated Dryer Hopper (10) Vacuum Pumps and Cyclones to 20 HP (10) Various Hoppers and Holding Bins in Silos to 96 X 96 48 X 84 Mfg. Unknown Cross Belt Magnet Kice and Aspiration Systems Numerous Pumps, Blowers, Cyclones, Feeders, Conveyors, Piping, Filters BLENDERS 48 X 48 X 72 Sudenga Stainless Steel Ribbon Blender 30 Deep X 72 Wide Mfg. Unk. Material Blender Hydra-Color 4-Component Material Blender 50-HP Vecoplan Type VAZ-200 Central Shredder (2) Large Whitlock Central Dryers (2) Large Whitlock Central Dryers Central Drying System w/ Hoppers, Pumps, & Related Hydra-Color 4-Component Material Blender 48 X 48 X 72 Sudenga Stainless Steel Ribbon Blender (10) Conair Gatto Pullers & (3) Brabor Saws
THURSDAY, MAY 28TH (5) 5,000 Lb. Hyster Model E50XL Sit-Down Electric Lift Trucks 8,000 Lb. Clark Model C500-Y100 LP Gas Pneumatic Tire Lift Truck 3,000 Lb. Kalmar Model C30AXPS LP Gas Solid Tire Lift Truck 5,000 Lb. Tusk Model 500PG-16 LP Gas Pneumatic Tire Truck Lift Truck GUILLOTINE 36 Wide Custom Built Guillotine with 15 HP Hydraulic Unit SAWS 144 Wide Heartland Fab and Machine Adjustable Head Saw; 30 Diameter Blades, 15 Hp Motors, Pneumatic Clamping, Jet Bag Type DC on Each Head, Material Conveyor Fast Line Model FLE Super Edger Pass-Thru Rip Saw; S/N 822981, 30 HP, 16 Wide, 4- Blades Whirlwind Automatic Upacting Saw 6 X 12 SSC Panel Saw 12 Grizzly Table Saw (10) Mitre Saws by Bosch and Others BALERS 4 X 4 X 6 Compac Specialties Hydraulic Horizontal Cardboard Baler, 30 HP Fox Model 60 Hydraulic Baler; S/N 871114, 30 x 60 FORK LIFTS 8,000 Lb. Clark Model EC50080 Sit Down Electric Lift Truck; S/N E685-0096- 8910FD, 3-Stage Mast, 8 Forks, Battery Looks New 8,000 Lb. Clark Model C500- Y100 LP Gas Pneumatic Tire Lift Truck; S/N 9075K0F, 3- Stage Mast, 7 Forks 5,000 Lb. Tusk Model 500PG-16 LP Gas Pallet Truck Lift Truck; S/N 205034A, 3-Stage Mast, 6,600 Hours (2006) (5) 5,000 Lb. Hyster Model E50XL Sit-Down Electric Lift Trucks; S/N C108V18599P, C108V17053N, 08496K, 18613P, 17052N, 187 Lift 4,000 Lb. Komatsu Model FG20ST-12 LP Gas Solid Tire Lift Truck; S/N 557660A, 3-Stage Mast, 12,000 Hours 3,000 Lb. Kalmar Model C30AXPS LP Gas Solid Tire Lift Truck; S/N 672031A, 11,200 Hours, 3-Stage Mast 3,000 Lb. Tusk Model 350CG17 LP Gas Solid Tire Lift Truck; S/N 673175A, 8,900 Hours, 3-Stage Mast (5) 3,000 Lb. Yale Model ESC030 Stand-Up Electric Lift Trucks; S/N N49272, N440745, 126 Lift, Newer Batteries 2,500 Lb. Hyster Challenger 25 Pneumatic Tire LP Gas Lift Truck (12) Various 24-Volt and 36- Volt Battery Chargers SHOP AND SUPPORT EQUIPMENT 1988 Mack 24 Box Truck w/ 400,000 Miles Approx. 5,000 Lb. Capacity Digital Platform Scale with Read Out 4,000 Lb. Little Model 40-18 Motorized Uncoiler; S/N S- 8927-72, 15 ID, 20 OD 12 Mandrel Motorized Uncoiler JBI Model 630G32-10-30YLS Filter Press; S/N 4387, (11) 24 x 24 Plates (10) Pallet Trucks, Plastic Strapping and Steel Banding Outfits (10) Various Size and Style Standard Self Dumping Hoppers (250) Approx. 43 X 43 Plastic Skids (25) 45 X 48 Collapsible Plastic Tubs Various Dissembled Pallet Rack Including (25) Uprights and (200) Beams (50) 44 X 56 X 36 Deep Collapsible Side Stacking Material Bins MAINTENANCE EQUIPMENT Maintenance Equipment and Parts Consisting of; Vertical Band Saws, Hydraulic Presses, D.E. Grinders, Drills, Tools, Motors, Breakers, Electrics, Hydraulics and Related 144 Wide Heartland Fab and Machine Adjustable Head Saw Fast Line Model FLE Super Edger Pass-Thru Rip Saw 36 Wide Custom Built Guillotine with 15 HP Hydraulic Unit 1988 Mack 24 Box Truck w/ 400,000 Miles (50) 44 X 56 X 36 Deep Collapsible Side Stacking Material Bins 6 X 12 SSC Panel Saw Whirlwind Automatic Upacting Saw Fox Model 60 Hydraulic Baler 4 X 4 X 6 Compac Specialties Hydraulic Horizontal Cardboard Baler
(13) Extrusion Lines Late Model Extruders COMPLETE PROFILE EXTRUSION PLASTIC LUMBER MANUFACTURING AND PLASTIC RECYCLING FACILITY INCLUDING (12) EXTRUSION LINES TO 6, GRINDERS TO 150-HP, MATERIAL HANDLING EQUIPMENT, FORK LIFTS, SHOP AND SUPPORT EQUIPMENT Plant Closed ECO-TECH PLASTICS, LLC 1956 S. Pine Street Burlington, Wisconsin 53105 60 Miles North of Chicago SALE DATE: Thursday, May 28th STARTING AT 9:00AM INSPECTION: Wednesday, May 27th 10:00 AM to 4:00 PM CINCINNATI INDUSTRIAL auctioneers appraisers since 1961 Contact Information 2020 Dunlap St. Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760 www.cia-auction.com FIRST CLASS MAIL! OF Large Qty. Downstream Important Mail TO BE DIRECTED TO THE ATTENTION EXECUTIVE PERSONNEL Grinder & Shredder Systems PRE-SORT FIRST CLASS U.S. POSTAGE PAID CINCINNATI, OHIO PERMIT NO. 3593 THURSDAY, MAY 28TH Plant Closed ECO-TECH PLASTICS, LLC 1956 S. Pine Street Burlington, Wisconsin 53105 60 Miles North of Chicago IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure. PHOTOGRAPHY BY THE A-TEAM DIRECTIONS From I-94 approx. 60 Miles North of Chicago and approx. 20 Miles South of Milwaukee Exit at No. 335 WI St. Rt. 11. Proceed West on WI-11 for Approx. 14 Miles to WI-83 BYPASS (the Burlington Bypass). Turn left (south) on WI-83 BYPASS and proceed 3 miles to left onto S. Pine St. / WI-83. Proceed 1/2 mile to auction site on left. Look for Auction Parking and Sale Entrance signs and arrows. For GPS, use 6455 S. Pine Street. Cincinnati Industrial Auctioneers Registered Wisconsin Auction Company License No. 172-053 Jeffrey L. Luggen Registered Wisconsin Auctioneer License No. 1148-052 TERMS OF SALE All equipment described herein will be sold as is, where is to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactory arrangements are made, a 25% deposit in cash, certified or cashier s check payable to Cincinnati Industrial Auctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless a signed exemption form is presented at the time of purchase. All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders must comply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website. 15% ONSITE BUYER S FEE 18% ONLINE BUYER S FEE CINCINNATI INDUSTRIAL auctioneers appraisers since 1961 Sale Under The Management Of Cincinnati Industrial Auctioneers 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760 cia-auction.com info@cia-auction.com In Conjunction with, Technical Advisors 847-956-7300 www.arlingtonmachinery.com