A range of shower fittings, precision engineered to provide an effective shower at all pressures. Available with either fixed or swivel heads

shower fittings/accessories general purpose shower fittings A range of shower fittings, precision engineered to provide an effective shower at all pressures Available with either fixed or swivel heads Rada SH13 Rada SH15 - White Specify as: Rada SH13 (1..99.6.2) A white swivel spray head in engineering plastic with 15 mm compression connection. Rada AD21 Specify as: Rada SH15 (1..99.6) A white swivel spray head in engineering plastic with ½ BSP male/ female connection. Specify as: Rada SH15 (CP) (1..98.6.3) A chrome plated swivel spray head with ½ BSP male/female connection. Rada er-s 31 Specify as: Rada SH16 (1..99.62.2) A white non-swivel spray head in engineering plastic with ½ BSP male/female connections. Specify as: Rada AD21 (1..99.58.1) A short shower arm (with the outlet at 15 to the vertical) with pipe concealing plate, ½ BSP female connection to shower head and ½ BSP male connection to concealed pipework. Specify as: Rada er-s 31 (1..18.45.1) Shower fitting assembly for connection to surface mounted pipework. Stainless steel shower arm and riser pipe with ½ BSP male connection. Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

Shower fittings/accessories TECHNICAL SPECIFICATION Installation and Maintenance Please refer to the appropriate Product Manual. Connections Spray heads are provided with ½ BSP male/female thread or 15 mm compression connection. Approvals Designed, manufactured and supported in accordance with accredited BS EN ISO 91:2 Quality Management Systems and BS EN ISO 141:24 Environmental Management Systems. Maintained Pressure (bar).5.4.3.2.1 Dimensions (mm) er-s31 LC spray plate (small spray holes) 5 1 15 HC spray plate (large spray holes) 2 25 Materials All materials are corrosion resistant. Spray heads are manufactured from engineering plastics and all metalwork is copper alloy, chrome plated as required. 9 78 Spray Performance SH13/SH15: A fully formed shower pattern is provided when the spray head is passing a minimum of 4.5 l/min. er-s 31: A fully formed shower pattern is provided when the spray head is passing a minimum of Low capacity: 3.5 l/min. High capacity: 6.5 l/min. Rada SH13/15 15 max. 52 5 min. Flow Diagram 55 35 Maintained Pressure (bar).3.2.1 SH13 SH15 4 5 6 7 8 9 1 Rada AD21 & SH15 6 15 52 35 max. Maintained Pressure (bar).3 AD21 + SH15.2.1 4 5 6 7 8 9 1 75 33 3 2 in any direction Rada er-s 31 Cromwell Road, Cheltenham Gloucestershire, GL52 5EP Tel: 1242 282527, Fax: 1242 28244 Rada is a registered trademark of. The company reserves the right to alter product specification without notice. July 26. All rights reserved. No part of this document, or any accompanying document, may be reproduced or transmitted in any form or by any means, including photocopying or electronically, without the permission of. P126/16

shower fittings/accessories Accessories Specify as: Mira Shower Seat (2.1536.129 White/Chrome), (2.1536.128 White) A white folding shower seat for mounting inside the bathroom or shower area, particularly suitable for the elderly or infirm. Manufactured from ABS engineering plastic with slip resistant finish with stainless steel hinge pins. Weight capacity: 95.5 kg evenly distributed. Specify as: Rada AD13 Cranked Tube (5.19.1.) Designed to connect the Rada TF53 to the Rada 215. Can be cut to length on site for compression connection direct to the mixing valve. Specify as: Rada DV15, 15 mm Automatic Drain Valve (1..19.) Designed to automatically drain the water from a shower fitting when the shower control is turned off. Its purpose is to remove the residual water which, when present, can support microbiological and bacteriological growth. Shower Seat AD13 Cranked Tube Specify as: Rada DV115 Chrome Plated Tee and Adaptor (1..19.) Connects the DV15 automatic drain valve to the AD29 hose and AD1 connector. Specify as: Rada AD1 Connector (1..95.6.1) 9 adaptor to connect flexible hose, DV115 Tee piece or DV15 automatic drain valve to concealed pipework. Solid chrome plated brass body, supplied with ½ BSP male thread inlet tube which may be cut to length and ½ BSP male outlet nipple. DV15 Automatic Drain Valve DV115 Chrome Plated Tee Specify as: Rada TH11/TH12 Thermometers (3.1.128.9.1, 3.1.128.6.1) A range of dial thermometers for accurate indication of water temperature. An adaptor with ¾ male taper thread enables the thermometer to be viewed correctly when connected to the appropriate tee. Rada TH11, 65 mm Thermometer ( - 1 C) Rada TH12, 1 mm Thermometer ( - 12 C) AD1 Connector TH11 Thermometer Specify as: AD14/AD15/AD17 Adaptors AD14 (5.555.39.1.) - ¾ male BSP to ½ male BSP adaptor. AD15 (5.555.8.1.) - ¾ female BSP to ½ male BSP adaptor. AD17 (5.555.4.1.) - ¾ female BSP to 15 mm male compression. AD14 AD15 AD17 Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

shower fittings/accessories rada bsr-s/3 shower fitting Durable polished chrome finish Copper alloy rigid shower arm Chrome plated flexible shower head Variable spray pattern ½ BSP male nipple for concealed pipework connections Specify as: Rada bsr-s/3 Shower Fitting (1..18.44.1) Rigid shower fitting featuring a swivel shower head and ½ BSP nipple for connection to concealed pipework. Note! Refer to Accessories section for additional spray cartridges. Dimensions (mm) Flow Diagram (low capacity spray plates).5 155.4.3.2.1 Active Start Relax 72 2 4 6 8 1 12 14 16 18 2 22 24 Flow Rate (I/min) Flow Diagram (high capacity spray plates) o 2 in any direction.5 3 o.4.3.2.1 Active Start Relax 2 4 6 8 1 12 14 16 18 2 22 24 Flow Rate (I/min) Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

Shower fittings/accessories TECHNICAL SPECIFICATION Installation and Maintenance Please refer to the appropriate Product Manual. Accessories 3R Adjustable Spray Cartridge (1..98.87.1) With Start, Active and Relax modes (chrome finish). 31R Hard Water Spray Cartridge (1..98.88.1) Self-draining with push-clean action (chrome finish). 4R High Performance Spray Cartridge (1..98.89.1) With Start, Pulsate and Champagne modes (white finish). Minimum pressure.5 bar. Requires removal of the flow. Connections Supplied with ½ BSP parallel nipple for connection to concealed pipework. Approvals Designed, manufactured and supported in accordance with accredited BS EN ISO 91:2 Quality Management Systems and BS EN ISO 141:24 Environmental Management Systems. Operation The bsr-s/3 has a rigid shower arm with a swivel shower head. The user is able to adjust the position of the shower head through an angle of 2 in any direction from the central position. Materials Shower arm: Chrome plated copper alloy Shower head: Engineering plastic, chrome plated. Cromwell Road, Cheltenham Gloucestershire, GL52 5EP Tel: 1242 282527, Fax: 1242 28244 Rada is a registered trademark of. The company reserves the right to alter product specification without notice. July 26. All rights reserved. No part of this document, or any accompanying document, may be reproduced or transmitted in any form or by any means, including photocopying or electronically, without the permission of. P2562/6

i i shower fittings Rada vr15 vandal resistant shower fitting Vandal resistant shower head Durable polished chrome finish Optional security plate for increased vandal resistance ½ BSP male nipple connection Fitted with single spray pattern plate with adjustable angle of discharge Fitted with 9 litres/minute flow (6 litre available) Specify as: Rada VR15 (1..98.77.1) Vandal resistant shower fitting for connection to concealed pipework with fixed spray plate and 9 l/min flow. Dimensions (mm) (with VR spray plate).4 7 2 2. With 9 l/min.8 18.5 24.5 96 1 5 x 1 5 n g c e n t r e s x 1 3 x 1 3 f Ø67 37 VR security kit (optional extra) 9 18.5 24.5 1..5.4.3.2.1 5 1 15 2 25 2..4.8.4.8 2..4.4 Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

Shower fittings TECHNICAL SPECIFICATION Installation and Maintenance Please refer to the appropriate Product Manual. Connections ½ BSP parallel nipple for connection to concealed pipework. Approvals WRAS Approved (Water Regulations Advisory Scheme) Designed, manufactured and supported in accordance with accredited BS EN ISO 91:2 Quality Management Systems and BS EN ISO 141:24 Environmental Management Systems. Materials Spray body: Brass, polished chrome finish. Mounting bush/inlet nipple: Brass. Spray cartridges: Engineering plastic. Flow Regulator: Engineering plastic. Strainer: Stainless steel. VR security plate: Plated mild steel. All screws in contact with water are stainless steel. Temperature Range Designed to accept water supplied between 5 C and 65 C. Pressure Range Recommended minimum maintained pressure at the inlet of the fitting:.1 bar. Maximum maintained pressure at the inlet of the fitting: 5. bar. (with 3R spray cartridge) 2. 1. 'Relax' with 9 l/min.5.4.3.2.1 5 1 15 2 25 (with 31R spray cartridge).4.8 2..4.8 2..4.8.4.4 Spray Performance Minimum flow rate necessary to achieve a fully formed spray pattern: 6 litres/min. Accessories 3R Adjustable Spray Cartridge (1..98.87.1) With Start, Active and Relax modes (chrome finish). 31R Hard Water Spray Cartridge (1..98.88.1) Self-draining with push-clean action (chrome finish). 4R High Performance Spray Cartridge (1..98.89.1) With Start, Pulsate and Champagne modes (white finish). Minimum pressure.5 bar. Requires removal of the flow. VR Security Kit (5.936.94.1.) Concealed mounting plate offering even greater security, for use with VR15/VR115. AD35 Extended Connection Nipple (5.555.74.2.) 25 mm x ½ BSP parallel nipple to BS2779. Note! For high risk applications the 3R, 31R and 4R spray cartridges are not recommended as the cartridges may be removed without the use of tools. 2. 1. With 9 l/min.5.4.3.2.1 5 1 15 2 25.4.8 2..4.8.4.8 2..4.4 Cromwell Road, Cheltenham Gloucestershire, GL52 5EP Tel: 1242 282527, Fax: 1242 28244 Rada is a registered trademark of. The company reserves the right to alter product specification without notice. July 26. All rights reserved. No part of this document, or any accompanying document, may be reproduced or transmitted in any form or by any means, including photocopying or electronically, without the permission of. P286/7

shower fittings/accessories Meynell Accessories - Isolating valves Service/isolation valves are recommended by the WRAS (Water Regulations Advisory Scheme) Supplied in pairs (red lever/blue lever) Available for 15 mm and 22 mm pipework Dimensions (mm) 6 ½ Isolating Valves 4 15 6 1 6 6 ¾ Isolating Valves 4 ½ Isolating Valves 45 6 7 11 22 15 Specify as: Meynell 15 mm Isolation/Strainer Unit (SPVE18J) Pair of Meynell Isolator/Strainer Units with 15 mm compression connections. Specify as: Meynell 22 mm Isolation/Strainer Unit (SPVE17J) Pair of Meynell Isolator/Strainer Units with 22 mm compression connections. Specify as: Meynell 15 mm Isolation/Strainer Check Valve Unit (SPVE16J) Pair of Meynell Isolator/Strainer/Check Valve Units with 15 mm compression connections. 12 ¾ Isolating Valves Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

shower fittings/accessories TECHNICAL SPECIFICATION Installation and Maintenance Please refer to the appropriate Product Manual. Connections Inlets: 15 mm or 22 mm compression. Approvals Designed, manufactured and supported in accordance with accredited BS EN ISO 91:2 Quality Management Systems and BS EN ISO 141:24 Environmental Management Systems. Materials Body: Nickel plated DZR brass. Cromwell Road, Cheltenham Gloucestershire, GL52 5EP Tel: 1242 282527, Fax: 1242 28244 Rada is a registered trademark of. The company reserves the right to alter product specification without notice. July 26. All rights reserved. No part of this document, or any accompanying document, may be reproduced or transmitted in any form or by any means, including photocopying or electronically, without the permission of. P3247/6

shower fittings/accessories meynell flexible shower fittings A range of flexible shower fittings offering both slide rail and fixed handset options Suitable for use with all Meynell single point showers and bath and shower mixers Available with either single spray or adjustable spray handsets Easy to clean white finish Specify as: Meynell ES Exposed (PESF256P) Slide rail shower kit, supplied complete with chrome plated slide rail, 5 m hose, soap tray, hose retaining ring and single spray handset. Specify as: Meynell ES Exposed (PESF257P) Slide rail shower kit, supplied complete with chrome plated slide rail, m hose, soap tray, hose retaining ring and single spray handset. ES Shower Kit RS Shower Kit Specify as: Meynell RS Built-in (PRSF256P) Slide rail shower kit, supplied complete with chrome plated slide rail, 5 m hose, soap tray, hose connecting elbow, hose retaining ring and single spray handset. Specify as: Meynell ES Plus Exposed (PESF255P) Slide rail shower kit, supplied complete with chrome plated slide rail, 5 m hose, soap tray, hose retaining ring and adjustable spray handset. Specify as: Meynell ES Exposed (PESF258P) Slide rail shower kit, supplied complete with chrome plated slide rail, m hose, soap tray, hose retaining ring and adjustable spray handset. ES Plus Shower Kit RS Plus Shower Kit Specify as: Meynell RS Plus Built-in (PRSF255P) Slide rail shower kit, supplied complete with chrome plated slide rail, 5 m hose, soap tray, hose connecting elbow, hose retaining ring and adjustable spray handset. Specify as: Meynell F Type Exposed (PESF259P) Shower kit, supplied complete with wall mounted handset holder, 5 m hose, hose retaining ring and single spray handset. Specify as: Meynell F Type Exposed (PESF261P) Shower kit, supplied complete with wall mounted handset holder, m hose, hose retaining ring and single spray handset. Specify as: Meynell F Type Built-in (PRSF261P) Shower kit, supplied complete with wall mounted handset holder, m hose, hose retaining ring, outlet connector and single spray handset. Single Spray Handset Adjustable Spray Handset Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

Shower fittings/accessories TECHNICAL SPECIFICATION Installation and Maintenance Please refer to the appropriate Product Manual. Connections Hose connections: ½ BSP female. Built-in hose connecting elbow: terminate with a ½ BSP parallel nipple. Approvals Designed, manufactured and supported in accordance with accredited BS EN ISO 91:2 Quality Management Systems and BS EN ISO 141:24 Environmental Management Systems. Materials Slide rails are manufactured in polished steel and hose connecting elbows in chrome plated brass. All other components are manufactured from engineering plastics and polymers. Pressures Minimum maintained pressure: Single spray handsets: Adjustable spray handsets: Maximum maintained pressure: Single spray handsets: Adjustable spray handsets:.5 bar..5 bar. 3. bar. 3. bar. Temperature Water temperature in excess of 85 C may cause damage to the product. Cromwell Road, Cheltenham Gloucestershire, GL52 5EP Tel: 1242 282527, Fax: 1242 28244 Rada is a registered trademark of. The company reserves the right to alter product specification without notice. July 26. All rights reserved. No part of this document, or any accompanying document, may be reproduced or transmitted in any form or by any means, including photocopying or electronically, without the permission of. P3252/7

shower fittings Rada vr125 vandal resistant shower fitting Vandal resistant shower head Durable polished chrome finish 15 mm falling push-fit straight pipe connection Optional Rada Riser Pipe suitable Fitted with single spray pattern plate with adjustable angle of discharge Fitted with 9 litres/minute flow (6 litre available) Specify as: Rada VR125 (1..98.81.1) Vandal resistant shower fitting for connection to falling surface pipework with fixed spray plate and 9 l/min flow. Dimensions (mm) (with VR spray plate) 2..4 33 (Not supplied) 115 With 9 l/min.8 18.5 24.5 Ø 69 18.5 1. 2..4.4.8 24.5.5.4.3.2.1 5 1 15 2 25.8 2..4.4 Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

Shower fittings TECHNICAL SPECIFICATION Installation and Maintenance Please refer to the appropriate Product Manual. Connections Push-fit socket to accept 15 mm pipework. Approvals WRAS Approved (Water Regulations Advisory Scheme) Designed, manufactured and supported in accordance with accredited BS EN ISO 91:2 Quality Management Systems and BS EN ISO 141:24 Environmental Management Systems. Materials Spray body: Brass, polished chrome finish. Mounting bush/inlet nipple: Brass. Spray cartridges: Engineering plastic. Flow : Engineering plastic. Strainer: Stainless steel All screws in contact with water are stainless steel. Temperature Range Designed to accept water supplied between 5 C and 65 C. Pressure Range Recommended minimum maintained pressure at the inlet of the fitting:.1 bar. Maximum maintained pressure at the inlet of the fitting: 5. bar. Spray Performance Minimum flow rate necessary to achieve a fully formed spray pattern: 6 litres/min. Accessories 3R Adjustable Spray Cartridge (1..98.87.1) With Start, Active and Relax modes (chrome finish). 31R Hard Water Spray Cartridge (1..98.88.1) Self-draining with push-clean action (chrome finish). 4R High Performance Spray Cartridge (1..98.89.1) With Start, Pulsate and Champagne modes (white finish). Minimum pressure.5 bar. Requires removal of the flow. Rada Riser Pipe (5.936.3.1.) Stainless steel, 7 mm supply pipe for use with VR125 and VR145. Note! For high risk applications the 3R, 31R and 4R spray cartridges are not recommended as the cartridges may be removed without the use of tools. (with 3R spray cartridge) 2. 1. 'Relax' with 9 l/min.5.4.3.2.1 5 1 15 2 25 (with 31R spray cartridge) 2. 1. With 9 l/min.5.4.3.2.1 5 1 15 2 25.4.8 2..4.8 2..4.8 2..4.8 2..4.8.4.4.4.8.4.4 Cromwell Road, Cheltenham Gloucestershire, GL52 5EP Tel: 1242 282527, Fax: 1242 28244 Rada is a registered trademark of. The company reserves the right to alter product specification without notice. July 26. All rights reserved. No part of this document, or any accompanying document, may be reproduced or transmitted in any form or by any means, including photocopying or electronically, without the permission of. P5544

shower fittings rada vr145 vandal resistant shower fitting Vandal resistant shower head Durable polished chrome finish 15 mm rising straight push-fit pipe connection Optional Rada Riser Pipe suitable Fitted with single spray pattern plate with adjustable angle of discharge Fitted with 9 litres/minute flow (6 litre available) Specify as: Rada VR145 (1..98.79.1) Vandal resistant shower fitting for connection to rising surface pipework with fixed spray plate and 9 l/min flow. Dimensions (mm) (with VR spray plate) 2..4 121 115 With 9 l/min.8 18.5 24.5 Ø 69 713 max. 33 18.5 24.5 1..5.4.3.2.1 5 1 15 2 25 2..4.8.4.8 2..4.4 Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

i i shower fittings rada vr115 vandal resistant shower fitting Vandal resistant shower head Durable polished chrome finish Optional security plate for increased vandal resistance 15 mm compression connection Fitted with single spray pattern plate with adjustable angle of discharge Fitted with 9 litres/minute flow (6 litre available) Specify as: Rada VR115 (1..98.83.1) Vandal resistant shower fitting for connection to concealed pipework with fixed spray plate and 9 l/min flow. Dimensions (mm) (with VR spray plate).4 2 118 2. With 9 l/min.8 18.5 24.5 1 5 x 1 5 n g c e n t r e s x 1 3 x 1 3 f Ø67 47 112 1. 2..4.4.8 VR security kit (optional extra) 18.5 24.5.5.4.3.2.1 5 1 15 2 25.8 2..4.4 Cromwell Road Cheltenham Gloucestershire GL52 5EP Tel: 1242 282527 Fax: 1242 28244

Shower fittings TECHNICAL SPECIFICATION Installation and Maintenance Please refer to the appropriate Product Manual. Connections 15 mm compression connection to concealed pipework. Approvals WRAS Approved (Water Regulations Advisory Scheme) Designed, manufactured and supported in accordance with accredited BS EN ISO 91:2 Quality Management Systems and BS EN ISO 141:24 Environmental Management Systems. Materials Spray body: Brass, polished chrome finish. Mounting bush/inlet nipple: Brass. Spray cartridges: Engineering plastic. Flow Regulator: Engineering plastic. Strainer: Stainless steel. VR security plate: Plated mild steel. All screws in contact with water are stainless steel. Temperature Range Designed to accept water supplied between 5 C and 65 C. Pressure Range Recommended minimum maintained pressure at the inlet of the fitting:.1 bar. Maximum maintained pressure at the inlet of the fitting: 5. bar. (with 3R spray cartridge) 2. 1. 'Relax' with 9 l/min.5.4.3.2.1 5 1 15 2 25 (with 31R spray cartridge).4.8 2..4.8 2..4.8.4.4 Spray Performance Minimum flow rate necessary to achieve a fully formed spray pattern: 6 litres/min. Accessories 3R Adjustable Spray Cartridge (1..98.87.1) With Start, Active and Relax modes (chrome finish). 31R Hard Water Spray Cartridge (1..98.88.1) Self-draining with push-clean action (chrome finish). 4R High Performance Spray Cartridge (1..98.89.1) With Start, Pulsate and Champagne modes (white finish). Minimum pressure.5 bar. Requires removal of the flow. VR Security Kit (5.936.94.1.) Concealed mounting plate offering even greater security, for use with VR15/VR115. Note! For high risk applications the 3R, 31R and 4R spray cartridges are not recommended as the cartridges may be removed without the use of tools. 2. 1. With 9 l/min.5.4.3.2.1 5 1 15 2 25.4.8 2..4.8.4.8 2..4.4 Cromwell Road, Cheltenham Gloucestershire, GL52 5EP Tel: 1242 282527, Fax: 1242 28244 Rada is a registered trademark of. The company reserves the right to alter product specification without notice. July 26. All rights reserved. No part of this document, or any accompanying document, may be reproduced or transmitted in any form or by any means, including photocopying or electronically, without the permission of. P5686