Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility Catalog 2800CT1001R04/12 2012 Class 2800 CONTENTS Description............................................ Page 2 Indoor Charging Stations................................ Page 3 Outdoor Charging Stations.............................. Page 6 Wall-Mount........................................... Page 6 Pedestal-Mount....................................... Page 7 DC Quick Charging Station............................. Page 10 RFID Accessories...................................... Page 14
Description Description Smart Charging, Smart Savings, Smart Grid Schneider Electric has developed a line of Electric Vehicle (EV) charging solutions for your unique needs. Schneider Electric will work with you to deliver the best charging infrastructure solution that includes product, installation, maintenance, and an infrastructure management system. Our EV charging products are compatible with safety standards and industry specific standards, such as the Society of Automotive Engineers standards (SAE J1772). Residential Charging Solutions Our residential charging stations provide simple, easy-to-install, and userfriendly solutions for charging electric vehicles at home. Installations are provided by a network of licensed installers. Commercial and Fleet Charging Solutions Fleet and commercial customers can count on charging solutions that offer convenient public and private access. DC Quick Charging Solutions The EVlink DC Quick Charger allows users to charge 80 percent of the battery in less than 30 minutes and provides a simple, efficient and safe way to quickly charge electric vehicles. EVlink DC Quick Charging Stations are CHAdeMO compliant. 2
Indoor Charging Stations Indoor Charging Stations Features Interface: Segmented charge and delay charge progress indicator Stop Button and Indicator Power status and system detected fault indicator Delay button and indicator Protection: Integral Ground Fault Protection at 5 ma Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss Enclosure: Non-metallic Indoor wall-mount (stud, drywall, or masonry wall) Cable Holder: Supports and helps organize the cable Independently mounted from enclosure Connector and Cord: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter) Indoor Charging Station Residential Applications Catalog Numbers Table 1: Indoor Charging Station Wall-Mount Catalog Number Output Voltage System Output Current Mounting Type Charging Units Application Features EV2430WS 240 Vac only 30 A Wall Single Indoor Delay Start 3
Indoor Charging Stations Technical Specifications Figure 1: 120/240 Vac Only N L1 L2 Indoor Charging Station Wiring Diagram Table 2: Power Specifications Input Power Input Power Connection Feeder Circuit Breaker Output Power Indoor Charging Stations 240 Vac Only, single-phase, 60 Hz, 30 A maximum Line 1, Line 2, and Ground 2-pole, 40 A, non-gfci type 240 Vac, 30 A, 7.2 kw max. 120 V 120 V 240 V Solid Neutral Ground Overcurrent Protection Device Equipment Ground Electric Vehicle Charging Station Physical Specifications Enclosure Type Type 1 (Indoor only) Enclosure Dimensions (W x H x D) 9.53 x 12.73 x 4.36 (242 x 323 x 111 mm) Enclosure Mounting Wall-mount Cable Type SAE J1772 Cable Length 18 ft. (5.5 m) Cable Management Non-retractable, separate from the enclosure Shipping Weight 17.0 lbs. (7.71 kg) User Interface Power Available Charging Ground Fault Stop Delay Start Status indicator Eight-segment progress indicator Red status indicator Push button and red stop indicator Push button to delay up to eight hours, in one-hour increments Protection Ground Fault Protection Ground Fault Protection System Test Environmental Operating Temperature Electro-static Discharge Surge Radiated Immunity Conducted Immunity Electrical Fast Transient/Burst (EFTB) Emissions Integral, CCID 5 ma, auto reset Automatic at the beginning of each charge cycle -22 F to 131 F (-30 C to 55 C) 15 kv open air, 8 kv contact 6 kv 20 V/m 20 V 2 kv FCC Class B Standards Compliance NEC Article 625 SAE J1772 UL 2594, UL 2231-1, UL 2231-2, UL 991, UL 1998, and UL 2251 4
Indoor Charging Stations Dimensions Figure 2: Indoor Charging Station (mm) Dimensions: 9.53 (242) 4.4 (111) 12.7 (323) Figure 3: Cable Bracket 5.5 (140) 3.1 (79) 2x 1.25 (32) 2x 1.5 (38) 3.0 (76) 6x.25 (6.4) Dimensions: (mm) 3.3 (84) 5.2 (132) 1.5 (38) 4.5 (114) 8.2 (208) 4.3 (109) 5
Outdoor Charging Stations Outdoor Charging Stations Wall-Mount Features Protection: Interface: Power status Charge indicator System detected fault indicator Authentication: Localized RFID solution (optional) Integral Ground Fault Protection at 5 ma Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss Enclosure: Metallic enclosure Indoor/outdoor wall-mount Cable Holder: Connector dock Supports and helps organize the cable Independently mounted from enclosure Connector and Cord: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter) Outdoor Charging Station (Wall-Mount) Residential and Commercial Applications Catalog Numbers Table 3: Outdoor Charging Stations Wall-Mount Catalog Number Output Voltage System Output Current Mounting Type Charging Units Application Features EV230WSR 208 240 Vac 30 A Wall Single Indoor/Outdoor EV230WSRR 208 240 Vac 30 A Wall Single Indoor/Outdoor RFID (non-networked) 6
Outdoor Charging Stations Pedestal-Mount Features Protection: Integral Ground Fault Protection at 5 ma Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss Interface: Power status Charge indicator System detected fault indicator Authentication: Localized RFID solution (optional) Cable and Connector Holders: Support and help organize cables Connector storage Integral with the enclosure Connector and Cable: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter) Enclosure: Metallic enclosure Pedestal-mount Mounting: Metallic Pedestal Outdoor Charging Station (Single Unit, Pedestal-Mount) Commercial Applications Outdoor Charging Station (Dual Unit, Pedestal-Mount) Commercial Applications Catalog Numbers Table 4: Outdoor Charging Stations Pedestal-Mount Catalog Number Output Voltage System Output Current Mounting Type Charging Units Application Authentication EV230PSR 208 240 Vac 30 A Pedestal Single Outdoor EV230PDR 208 240 Vac 30 A Pedestal Dual Outdoor EV230PSRR 208 240 Vac 30 A Pedestal Single Outdoor RFID (non-networked) EV230PDRR 208 240 Vac 30 A Pedestal Dual Outdoor RFID (non-networked) 7
Outdoor Charging Stations Technical Specifications Table 5: Outdoor Charging Stations (Wall and Pedestal Mount) Power Specifications (Each charging unit) Input Power Input Power Connection Feeder Circuit Breaker Output Power 208 240 Vac, 30 A, single phase, 60 Hz Line 1, Line 2, and Ground 2-pole, 40 A, non-gfci type 208 240 Vac, 30 A Physical Specifications Outdoor Wall-Mount Charging Station Enclosure Type Type 3R Enclosure Dimensions See Dimensions on Page 9 Enclosure Mounting Wall or Pedestal Cable Type SAE J1772 Cable Length 18 ft. (5.5 m) Cable Management Non-retractable, integral with the enclosure Unit Options Single unit (Wall-mount) Single or Dual units (Pedestal-mount) User Interface Single Unit Dual Unit Power Available Charging System Detected Fault Status indicator Blinking blue indicator Red status indicator Authentication Type Programming Non-networked RFID authentication card Radio frequency remote control Protection Ground Fault Protection Ground Fault Protection System Test Integral, CCID 5 ma, auto reset Automatic at the beginning of each charge cycle Environmental Outdoor Pedestal-Mount Charging Stations Operating Temperature Electro-static Discharge Surge Radiated Immunity Conducted Immunity Electrical Fast Transient/Burst (EFTB) Emissions Standards Compliance -22 F to 131 F (-30 C to 55 C) 15 kv open air, 8 kv contact 6 kv 20 V/m 20 V 2 kv FCC Class B NEC Article 625 SAE J1772 UL 2594, UL 2231-1 & UL 2231-2, UL 991, UL 1998 and UL 2251 8
Outdoor Charging Stations Dimensions Figure 4: Outdoor Wall-Mount Charging Station Figure 5: Cable Bracket with Connector Dock 9.8 (250) Dimensions: (mm) 4.0 (102) 13.1 (333) 7.1 (181) 6.7 (170) 5.8 (148) Dimensions: (mm) 20.5 (521) 18.1 (460) 5.0 (127) 3.8 (97) 2.0 (50.8) Figure 6: Pedestal Base for Outdoor Charging Station Figure 7: Outdoor Pedestal-Mount Charging Station 2x 1.0 (25) 4.1 (103) 2x 5.9 (150) 2x.80 (20) 2x 3.7 (93) Dimensions: (mm) 4.9 (125) Dimensions: (mm) 13.0 (330) 13.0 (330) 6.7 (170) 7.9 (200) 7.9 (200) 5.9 (150) 49.6 (1260) 49.6 (1260) 2x 1.8 (46) 2x 4.3 (108) 2x 3.9 (98) 4.1 (103) 6.6 (166.5) 6.6 (166.5) 2x.70 (17.5) 3.0 (76.2) 4x R.30 (7.5) 7.9 (200) Single Unit 7.9 (200) Dual Unit 5.2 (133) 9
DC Quick Charging Station DC Quick Charging Station Features The EVlink 50 kw charging station allows compatible vehicles to be recharged to 80% in approximately 30 minutes. Wireless Communication Antenna (optional) Power Compartment Cover Touch Screen Display Connector and Cable: 125 A dc connector CHAdeMO compliant Cable length: 20 ft. (6.1 m) 5.7 backlit LCD touch screen Display of residual charge and set point Emergency Stop Button RFID Authentication or Credit Card Reader (optional) Enclosure: Metallic enclosure Pedestal-mount Metallic Pedestal Catalog Numbers NOTE: EVlink DC Quick Charging Stations are CHAdeMO compliant. Table 6: DC Quick Charging Stations Catalog Number Authentication Input Voltage Input Current Output Voltage Output Current Mounting Type Charging Units Application EVF20850DTR RFID (non-networked) Pedestal Single Outdoor 208 V, 3-phase 160 A EVF20850DTB Credit Card 500 Vdc 125 A Pedestal Single Outdoor EVF24050DTR RFID (non-networked) Max. Max. Pedestal Single Outdoor 240 V, 3-phase 140 A EVF24050DTB Credit Card Pedestal Single Outdoor 10
DC Quick Charging Station Technical Specifications Table 7: DC Quick Charging Stations Power Specifications (Each charging unit) Input Power Input Power Connection Feeder Circuit Breaker Output Power Control Compartment Power Compartment 58 kva Line and Neutral Line 1, Line 2, Line 3, and Ground Conductors feeding the charging station and the upstream overcurrent protection must be sized in accordance with local electrical codes. 50 kw max. Physical Specifications Enclosure Type NEMA 3R Enclosure Dimensions 84 x 42 x 34 (2138 x 1068 x 869 m) Enclosure Mounting Pedestal Cable Type CHAdeMO compliant 1 Cable Length 20 ft (6.1 m) Cable Management Non-retractable, integral with the enclosure Unit Options Shipping Weight 1 Schneider Electric will adapt to SAE when standard is released. Wireless communication antenna, User ID RFID tag reader, Credit Card Reader 1650 lbs (748 kg) Authentication RFID Card Option Major Credit Card Option Charging station stored RFID card IDs Secure cellular network Environmental Operating Temperature Storage Temperature RoHS -22 F to 122 F (-30 C to +50 C) -4 F to 176 F (-20 C to +80 C) All elements are RoHs compliant Standards Compliance and Certifications UL 2202 Electric Vehicle (EV) Charging System Equipment UL 2231-1 and 2231-2 Personnel Protection Systems for Electric Vehicles (EV) supply circuits UL 2251 Plugs, Receptacles and Couplers for Electric Vehicles 11
DC Quick Charging Station Touch Screen Display The DC Quick Charging Station includes a 7.5 inch LCD touch screen display. Additional options include an RFID tag reader and credit card reader. The touch screen provides: User friendly graphic access Secure administrative access to change settings Usage, operation, and fault instructions Figure 8: Touch Screen Display and Other Options A B A C (A) Touch screen (B) RFID tag reader (C) Credit card reader Touch Screen Display + RFID Reader Touch Screen Display + Credit Card Reader 12
DC Quick Charging Station Dimensions Figure 9: DC Quick Charging Station 33.8 (858.5) 87.5 (2222.5) 83.4 (2118.3) 73.9 (1877) 42 (1066.8) 26.8 (680.7) 3.0 (76) 20.2 (513.1) (mm) Dimensions: 21.1 (535.9) 36.8 (934.7) 13
Radio Frequency Identification (RFID) Accessories Radio Frequency Identification (RFID) Accessories The RFID solution for Schneider Electric EV charging stations consists of the following accessories: Handheld Programmer RFID Authentication Card Handheld Programmer Features Used to add and remove users One needed for total charging station system Connects via radio frequency Feedback via audio tone and LED indicator on Proximity Reader 4-digit PIN access Technical Specifications EVRFIDHP Frequency 125 khz / 62.5 khz Dimensions 7.0 x 2.5 x 0.75 (178 x 63.5 x 19 mm) Weight 7 oz. (200 g) Operating Temperature -22 F to 131 F (-30 C to 55 C) Color Black Material ABS Description RFID Handheld Programmer Catalog Number EVRFIDHP RFID Authentication Cards Features Wallet friendly Robust and durable design Industry standard format Unique ID codes Technical Specifications Frequency 125 khz / 62.5 khz Weight 0.31 oz. (8.8 g) Operating Temperature -40 F to 158 F (-40 C to +70 C) Humidity 0 100% non-condensing Material ABS EVRFIDKF-10 Description RFID Authentication Card (Quantity of 10) Catalog Number EVRFIDKF-10 14
Radio Frequency Identification (RFID) Accessories Accessory Dimensions Figure 10: Handheld Programmer Dimensions: (mm) 7.0 (178) 2.5 (63.5).75 (19) Figure 11: RFID Authentication Cards 3.37 (85.5) Dimensions: (mm) 2.13 (54).034 (.86) 15
Schneider Electric USA, Inc. 1601 Mercer Road Lexington, KY 40511 USA 1-888-778-2733 www.schneider-electric.us Schneider Electric and EVlink are trademark owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are property of their respective owners. 2800CT1001R04/12