Fitting out schedule Linssen Grand Sturdy Mark II series 410 AC Mark II 430 AC Mark II 470 AC Mark II 500 Variotop Mark II English
Linssen Grand Sturdy 410 Mark II Basic specifications Length overall (approx.) 12.55 m Length over deck (approx.) 11.88 m Length waterline (approx.) 10.34 m Beam (approx.) 4.20 m Draft (single) (approx.) 1.34 m Draft (twin) (approx.) 1.24 m Min. air draft (approx.) 2.90 m CE Classification B Headroom front cabin approx.±) 1.98 m Headroom cabin (approx.) 1.98 m Headroom saloon (approx.) 1.96 m Headroom aft cabin (approx.) 2.00 m Hull / topsides 6/5 mm Decks 4 mm Superstructure 4 mm Weight (approx.) ±15,500 kg Displacement ± 15.5 m 3 Construction multi chine Bulkheads 3 stainless steel Propeller shaft 316, ø 40 mm. Steering system hydraulic Engine control system Morse single handle control Engine(s): 12.55 x 4.20 m. Single: 1 x 4 cyl. Vetus-Deutz Turbo Diesel Type DTA44, 104 kw (140 HP) 2.500 rpm Gearbox: ZF 45-H / 2.5 :1 Alternator: 1 x 95 A. Twin: 2 x 4 cyl. Vetus-Deutz Turbo Diesel Type DT44, 84 kw (114 HP) 2.500 rpm Gearbox: ZF 45-H / 2.5 :1 Alternator: 2 x 95 A. AC: B Saloon: H FC: P powered by AC: A Saloon: H FC: O 2
Linssen Grand Sturdy 410 Mark II De Luxe Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon Aluminium dropping window in saloon, at Port side Aluminium opening portholes in cabin and aft cabin with plain glass (6x) All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail with stainless steel entrance chains on bow-, transom, and side railing entrances Polished stainless steel swimming ladder from aft deck to bathing platform incl. solid teak steps with non-slip profiles Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated stainless steel swimming platform with teak grating Polished stainless steel bollards: Foredeck and at the stern 2x double, midships 2x single Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Integrated supports for davits Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Elegant solid wooden stair post with stainless steel Design hand rail Saloon-/ and dinette table with stainless steel fixed Design support Halogen interior lights with wall switches Bar in saloon with Linssen Yachts glasses Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in galley Cutlery tray in galley Slatted base in bed(s) aft cabin Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including integrated carving board Stainless steel sink in the galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in AC and FC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium series Curtain in shower cabin aft cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Manual anchor winch type URSUS with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruceanchor. Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters Entrance to engine compartment with a ladder DUAL CROSS engine foundation 3
Linssen Grand Sturdy 410 Mark II De Luxe Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Fuel tanks with inspection-/cleaning hatch, (approx. 2x 580 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic waterpressure system, including solid pvc water tank with inspection-/cleaning hatch. (approx. 440 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (1 x 50 Ah; twin 2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets 240V / 16A shore power connection with fuses, 240V. sockets etc. 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Linssen logo on super structure Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Including cover In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter (2x at Twin version) Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata Voltmeter for 12V domestic circuit Canvas and covers Cover for steering position 4
Linssen Grand Sturdy 410 Mark II Royal Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon Aluminium dropping window in saloon, at Port side Aluminium opening portholes in cabin and aft cabin with plain glass (6x) All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail with stainless steel entrance chains on bow-, transom, and side railing entrances Polished stainless steel swimming ladder from aft deck to bathing platform incl. solid teak steps with anti-slip profiles Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with anti-slip profiles Integrated stainless steel swimming platform with teak grating Polished stainless steel bollards: Foredeck and at the stern 2x double, midships 2x single Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Integrated supports for davits Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Integrated deckboxes, U-shaped aft bench with lockable teak top and gas-pressure struts Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood with inlaid wenge-frames in all cupboards and drawers Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Elegant solid wooden stair post with stainless steel Design hand rail Saloon-/ and dinette table with stainless steel fixed Design support Halogen interior lights with wall switches 2x wall-/ reading lamp in aft cabin and forward cabin Adjustable lighting saloon (Port & SB separated) Bar in saloon with Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Stairs lighting throughout the interior Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in galley Cutlery tray in galley Corner cupboard in galley with revolving platform Slatted base in bed(s) aft cabin Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including integrated carving board Stainless steel sink in the galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in AC and FC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heating (blower) at steering position Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Window spray-installation at windsreen SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Stereo radio/cd, including 2 speakers in the saloon and amplified radio-antenna Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin 5
Linssen Grand Sturdy 410 Mark II Royal Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters Entrance to engine compartment with a ladder DUAL CROSS engine foundation Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Provisions for stern thruster; ducting mounted in stern (ø 185 mm) including hydraulic pipes Hydraulic bow thruster 95kgf (5,2 kw / 7HP) Fuel tanks with inspection-/cleaning hatch, (approx. 2x 580 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic waterpressure system, including solid pvc water tank with inspection-/cleaning hatch. (approx. 440 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (1 x 50 Ah; twin 2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets 240V / 16A shore power connection with fuses, 240V. sockets etc. Shore power connection equipped with an isolating transformer 14,6A/3,5 kva including softstart, for an optimal separation between domestic and shore power 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Ships name on bow and stern. Port of registry and registration number on stern Linssen logo on super structure Cushions for steel deck boxes in synthetic leather Teak deckbox joint Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Including cover Solid teak table with folding section on aft deck. In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter (2x at Twin version) Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata - Rudder indicator - Compass including ST-60 transducer - Low performance VHF installation at steering position Voltmeter for 12V domestic circuit Canvas and covers Cabrio incl. zip fastener back Cover for steering position 6
Linssen Grand Sturdy 430 Mark II Basic specifications Length overall (±) 13.50 m Length over deck (±) 13.46 m Length waterline (±) 11.52 m Beam (±) 4.30 m Draft (single) (±) 1.35 m Draft (twin) (±) 1.20 m Minimum air draft (±) 2.96 m CE Classification A Headroom front cabin (±) 1.98 m Headroom cabin (±) 1.98 m Headroom saloon (±) 1.97 m Headroom aft cabin (±) 1.98 m Hull / topsides 6/5 mm Decks 4 mm Superstructure 4 mm Weight ±19,000 kg Displacement ± 19 m 3 Construction multi chine Bulkheads 3 stainless steel Propeller shaft 316, ø 40 mm. Steering system hydraulic Engine control system Morse single handle control En g i n e(s): 13,50 x 4,30 m. Single: 1 x 6 cyl. Vetus-Deutz Turbo Diesel Type DT66, 125 kw (170 HP) 2.500 rpm Gearbox: ZF 45-H / 2.5 : 1, Alternator: 1 x 95 A. Twin: 2 x 4 cyl. Vetus-Deutz Turbo Diesel Type DT44, 84 kw (114 HP) 2.500 rpm Gearbox: ZF 45-H / 2.5 :1 Alternator: 2 x 95 A. AC: B Saloon: H FC: P powered by AC: A Saloon: H FC: O 7
Linssen Grand Sturdy 430 Mark II De Luxe Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon Aluminium dropping window in saloon, at Port side Aluminium opening portholes in cabin (6x) and aft cabin (6x) with plain glass All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail with stainless steel chains on bow- and side-railing entrances Integrated stern door in aft deck dodgers In transom integrated winding-/bathing steps on SB and port side Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships 2x single and 2 cleats mid front Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Provisions in hull for hydraulic passerelle Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Interior and finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Elegant solid wooden stair post with stainless steel Design hand rail Luxury saloon-/ and dinette table with stainless steel fixed Design support Luxury halogen interior lights with wall switches Bar in saloon with Linssen Yachts glasses Galley cupboard with drawers Spacious hanging-locker in forward cabin Spacious hanging-locker in aft cabin Wastebucket integrated in galley Cutlery tray in galley Special slatted and sprung matrass bases in aft cabin Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including integrated carving board Elegant stainless steel sink (1 1/2 model) in galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in FC and AC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters Entrance to engine compartment with a ladder DUAL CROSS engine foundation 8
Linssen Grand Sturdy 430 Mark II De Luxe Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Fuel tanks with inspection-/cleaning hatch (approx. 2x 580 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic waterpressure system, including solid pvc watertank with inspection-/cleaning hatch. (approx. 440 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection, (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (1 x 50 Ah; twin 2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets (5x) 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Original Linssen synthetic fiber rope fender with stainless steel stretcher Linssen logo on super structure Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather including cover In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter (2x at Twin version) Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata Voltmeter for 12V domestic circuit Canvas and covers Cover for steering position Exterior finish Solid teak entrance door including sliding hatch Heavy Duty Linssen pvc fendering around swimming platform 9
Linssen Grand Sturdy 430 Mark II Royal Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon Aluminium dropping window in saloon, at Port side Aluminium opening portholes in cabin (6x) and aft cabin (6x) with plain glass All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail with stainless steel chains on bow- and side-railing entrances Integrated stern door in aft deck dodgers In transom integrated winding-/bathing steps on SB and port side Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships 2x single and 2 cleats mid front Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Provisions in hull for hydraulic passerelle Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Integrated deckboxes, U-shaped aft bench with lockable teak top and gas-pressure struts Interior and finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood with inlaid Wenge-frames in all cupboards and drawers Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Elegant solid wooden stair post with stainless steel Design hand rail Luxury saloon-/ and dinette table with stainless steel fixed Design support Luxury halogen interior lights with wall switches 2x luxury wall-/ reading lamp in aft cabin and forward cabin Adjustable lighting saloon (Port & SB separated) Bar in saloon with Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Stairs lighting throughout the interior Galley cupboard with drawers Spacious hanging-locker in forward cabin Spacious hanging-locker in aft cabin Wastebucket integrated in galley Cutlery tray in galley Corner cupboard in galley with revolving platform Special slatted and sprung matrass bases in aft cabin Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including integrated carving board Elegant stainless steel sink (1 1/2 model) in galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in FC and AC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heating (blower) at steering position Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Window spray-installation at windsreen SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Stereo radio/cd, including 2 speakers in the saloon and amplified radio-antenna Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) 10
Linssen Grand Sturdy 430 Mark II Royal Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters and entrance engine compartment with a ladder DUAL CROSS engine foundation Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Provisions for stern thruster; ducting mounted in stern including hydraulic pipes Hydraulic bow thruster 160kgf (9,5 kw / 13HP) Fuel tanks with inspection-/cleaning hatch (approx. 2x 580 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic waterpressure system, including solid pvc watertank with inspection-/cleaning hatch. (approx. 440 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection, (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (1 x 50 Ah; twin 2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets (5x) 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. Shore power connection equipped with an isolating transformer 14,6A/3,5 kva including softstart, for an optimal separation between domestic and shore power 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Original Linssen teak deck on swimming platform and stairs to aft deck Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Ships name on bow and stern. Port of registry and registration number on stern Linssen logo on super structure Cushions for steel deck boxes in synthetic leather Teak deckbox joint Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather including cover Solid teak table with folding section on aft deck. In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter (2x at Twin version) Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata - Rudder indicator - Compass including ST-60 transducer - Low performance VHF installation at steering position Voltmeter for 12V domestic circuit Canvas and covers Cabrio incl. zip fastener back Cover for steering position 11
Linssen Grand Sturdy 470 Mark II Basic specifications Length overall (approx.) 14.70 m Length over deck (approx.) 14.65 m Length waterline (approx.) 12.62 m Beam (approx.) 4.45 m Draft single (approx.) 1.41 m Draft (approx.) 1.36 m Minimum air draft (approx.) 3.15 m CE Classification A Headroom front cabin (approx.) 2.07 m Headroom cabin (approx.) 2.02 m Headroom saloon (approx.) 1.99 m Headroom aft cabin (approx.) 1.98 m Hull / topsides 6/5 mm Decks 4/5 mm Superstructure 4 mm Weight (approx.) ±22,000 kg Displacement ± 22 m 3 Construction multi chine Bulkheads 3 stainless steel Propeller shaft 316, ø 40 mm. Steering system hydraulic Engine control system Morse single handle control Engines: 14.70 x 4.45 m. Single: 1 x 6 cyl. Vetus-Deutz Turbo Diesel Type DT66, 125 kw (170 HP) 2.500 rpm Gearbox: ZF 45-H / 2.5 : 1 Alternator: 1 x 95 A. Twin: 2 x 4 cyl. Vetus-Deutz Turbo Diesel Type DTA44, 104 kw (140 HP), 2.500 rpm Gearbox: ZF 45-H / 2.5:1 Alternator: 2 x 95 A. AC: A1 Saloon: H1 FC: O2 powered by AC: B2 Saloon: H1 FC: P2 12
Linssen Grand Sturdy 470 Mark II De Luxe Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon and cabin Aluminium dropping window in saloon and cabin, at Port side Aluminium opening portholes in forward cabin (2x) and aft cabin (6x) with plain glass All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing & deck fittings Polished stainless steel sea rail with stainless steel chains on bow- and side-railing entrances Integrated stern door in aft deck dodgers In transom integrated winding-/bathing steps on SB and port side Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships-front and midships-stern 2x single Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Provisions in hull for hydraulic passerelle Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks. Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches 2 Stools cherry wood - upholstery, integrated under berth in owners cabin Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Luxury saloon-/ and dinette table with stainless steel fixed Design support Luxury halogen interior lights with wall switches Bar in saloon with Linssen Yachts glasses Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in galley Cutlery tray in galley Slatted base in bed(s) aft cabin and front cabin (layout O2) Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including carving board Elegant stainless steel sink (1 1/2 model) in galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in FC and AC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower in forward and aft cabin Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Curtain in shower cabin forward cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine foom, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment 13
Linssen Grand Sturdy 470 Mark II De Luxe Floor hatch in saloon hinged with gas struts for easy inspection from filters Entrance to engine compartment with a ladder DUAL CROSS engine foundation Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Fuel tanks with inspection-/cleaning hatch (2x approx. 830 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic water pressure system, incl. solid pvc watertank with inspection-/cleaning hatch. (approx. 660 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets (5x) 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Linssen logo on super structure Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Including cover In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata Voltmeter for 12V domestic circuit Canvas and covers Cover for steering position 14
Linssen Grand Sturdy 470 Mark II Royal Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon and cabin Aluminium dropping window in saloon and cabin, at Port side Aluminium opening portholes in forward cabin (2x) and aft cabin (6x) with plain glass All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing & deck fittings Polished stainless steel sea rail with stainless steel chains on bow- and side-railing entrances Integrated stern door in aft deck dodgers In transom integrated winding-/bathing steps on SB and port side Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships-front and midships-stern 2x single Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Provisions in hull for hydraulic passerelle Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks. Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Integrated deckboxes, U-shaped aft bench with lockable teak top and gas-pressure struts Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood with inlaid Wenge-frames in all cupboards and drawers Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches 2 Stools cherry wood - upholstery, integrated under berth in owners cabin Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Luxury saloon-/ and dinette table with stainless steel fixed Design support Luxury halogen interior lights with wall switches 2x luxury wall-/ reading lamp in aft cabin and forward cabin Adjustable lighting saloon (Port & SB separated) Bar in saloon with Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Stairs lighting throughout the interior Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in galley Cutlery tray in galley Corner cupboard in galley with removeable revolving platform Slatted base in bed(s) aft cabin and front cabin (layout O2) Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Ceramic hob, stainless steel, 240V.1x 1200 W. cooking zone 1x 1700 W. cooking zone. Corian worktop in the galley including carving board Elegant stainless steel sink (1 1/2 model) in galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in FC and AC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower in forward and aft cabin Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Curtain in shower cabin forward cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heating (blower) at steering position Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Window spray-installation at windsreen SB, middle and port Hydraulic anchor winch with integrated stainless steel anchor rollers and anchor rail. With 50m. 10 mm. anchor chain and 20kg. Bruce-anchor. Stereo radio/cd, including 2 speakers in the saloon and amplified radio-antenna Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin 15
Linssen Grand Sturdy 470 Mark II Royal Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine foom, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters and entrance engine compartment with a ladder DUAL CROSS engine foundation Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Provisions for stern thruster; ducting mounted in stern including hydraulic pipes Hydraulic bow thruster 160kgf (9,5 kw / 13 HP) Fuel tanks with inspection-/cleaning hatch (2x approx. 830 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Generator 240 V/4,0kW, Intercooling, continous rating. Remote control, Volt-, Herz-, Amp. meter and Rev. counter meter. Incl. water-/gas separator for generator exhaust Automatic water pressure system, incl. solid pvc watertank with inspection-/cleaning hatch. (approx. 660 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Deck wash pump with connection on outside steering position Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets (5x) 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. Shore power connection equipped with an isolating transformer 14,6A/3,5 kva including softstart, for an optimal separation between domestic and shore power 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Original Linssen teak deck on swimming platform and stairs to aft deck Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Ships name on bow and stern. Port of registry and registration number on stern Linssen logo on super structure Cushions for steel deck boxes in synthetic leather, colour cream Teak deckbox joint Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Including cover Solid teak table with folding section on aft deck. In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter Government approved navigation lights Compressor horn Spare wiring GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata - Rudder indicator - Compass including ST-60 transducer - Low performance VHF installation at steering position Voltmeter for 12V domestic circuit Canvas and covers Cabrio incl. zip fastener back Cover for steering position 16
Linssen Grand Sturdy 500 Variotop Mark II Basic specifications Length overall incl. bathing platform (De Luxe) (approx.) Length overall incl. bathing platform (Royal) (approx.) Length over deck (approx.) Length waterline (approx.) Beam (approx.) Draft single (approx.) Draft twin (approx.) Minimum air draft with folded mast (De Luxe) (approx.) Minimum air draft with folded mast and Variotop parking frame (Royal) (approx.) CE Classification Headroom front cabin (approx.) Headroom cabin (approx.) Headroom saloon (approx.) Headroom aft cabin (approx.) Hull / topsides Decks Superstructure 14.98 m 15.75 m 14.10 m 13.42 m 4.88 m 1.40 m 1.35 m 4.10 m 3.50 m A 2.05 m 2.05 m 2.00 m 2.00 m 6/5 mm 4/5 mm 4 mm 14.98 x 4.88 m. Weight (approx.) 28,000 kg Displacement (approx.) 28 m 3 Construction Multi chine Bulkheads 3 Propeller shafts stainless steel 316, ø 40 mm. Steering system hydraulic Engine control system Morse single handle control (De Luxe version) Engine control system Electronic MMC (Royal version) En g i n e s: Single: 1 x 6 cyl. Vetus Deutz Turbo Diesel Typ DTA66, 1 x 154 kw (210 HP) 2.500 rpm Gearbox: ZF 45-H / 2.5:1 Alternator: 1 x 55 A. (24 V) Twin: 2 x 6 cyl. Vetus Deutz Turbo Diesel Typ DT66, 2 x 125 kw (170 HP) 2.500 rpm Gearbox: ZF 45-H / 2.5:1 Alternator: 2 x 55 A. (24 V) powered by 17
Linssen Grand Sturdy 500 Variotop Mark II AC: A4 Saloon: J1 FC: O3 AC: B1 Saloon: K2 FC: P2 OPTION AC: C Saloon: J1 FC: P2 18 OPTION AC: D Saloon: H FC: Q1
Linssen Grand Sturdy 500 Variotop Mark II De Luxe Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on cabin deck and saloon deck Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Additional isolating coating in the wheelhouse Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows in anodised aluminium profiles Aluminium dropping window in saloon, at port side Aluminium dropping window in saloon, at starboard side. Aluminium opening portholes in the front cabin (4x) and aft cabin (6x) with plain glass, profile in hull color All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof (3x), incl. curtain Aluminium escape hatch in aft cabin Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail. Bow opening lockable by means of integrated stainless steel bar Integrated stern door (SB/Port) to swimming platform Integrated winding steps on SB and port side in transom, from swimming platform Stainless steel hinged side ladder integrated in side deck rail (Port and Starboard) Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non skid profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships-front and midships-stern 2x single Handrail package: Handrails on saloon deck, cabin deck, Variotop arch and at the bathing ladder Stainless steel protection set at bollards front/middle/ aft and at railing entrances in side decks. Aluminium Linssen design mast Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Provisions in hull for hydraulic passerelle Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of elegant finish with panels Interior in all compartments finished in cherry wood Anatomically moulded dinette-/ saloon settees, finished in leather, 2 club chairs in saloon port side (only with layout K2) Anatomically moulded settee in wheelhouse, finished in leather Curtains for all windows and ventilation-/escape hatches Two Stools cherry wood/leather, integrated under berth aft cabin (only layout A4) Original teak ship s floor with inlaid ash striping in all compartments Interior provided with chromium / stainless-steel design fittings Door and locker furniture with push buttons Elegant solid wooden stair post with high polished stainless steel hand rail Luxury walnut wood dashboard with real saddlestitched leather trim Luxury saloon and dinette table with stainless steel fixed design support Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Attractive bar in saloon including Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in the pantry Cutlery tray in galley Special slatted and sprung matrass bases in aft cabin and front cabin Mattresses in aft cabin, front cabin and guest cabin type Coldfoam MK50/40 12cm (layout O3) Solid high polished stainless steel handrail at stairs to aft cabin Grab rail along front of galley (chromium) Wooden handrail on saloondeck (mid-ships) Eq u i p m e n t Electric refrigerator 110 l. with freezer compartment in galley Gas hob, 3-burner, stainless steel Corian worktop in galley incl. stainless steel sink (1 1/2 model) Extractor with revolution regulator (240 V). Incl. 2x light points above hob integrated in wooden pillar Electrical toilet, fresh water flush (2x) Washbasin in front and aft cabin toilet-compartment, built into vanity unit. Corian work tops in toilet compartments including integrated corian wash basin Complete luxury shower installation in front and aft cabin, with Corian shower tray and drainage pump. Selected bathroom fittings (mirror, toilet paperholder etc.) Tabs in chromium Shower curtain in shower aft cabin an front cabin Linssen Yachts, thermostatic controlled, warm water heating with convector heaters in all compartments and design radiator in wet cel aft and front cabin. Heavy duty stainless steel windscreen wipers SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box in impact resistance ABS, fitted in saloon cupboard Fire extinguishers (2 kg) in aft cabin, saloon, galley and wheelhouse Techncal details 19
Linssen Grand Sturdy 500 Variotop Mark II De Luxe Hydrolubricated propeller shaft installation, waterproof and low vibration fitted with rubber clampseals into the steel outside tube. Stainless steel propeller shaft with AISI-316 in rubber bearings, Ø 40 mm Engine/shaft connection through homocinetic coupling and thrust bearing Special 4-bladed propellers (for less noise and vibration) Anodes depending on cruising area Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system (patented). Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Centre floor hatches in saloon hinged with gas pressurized cylinders for easy inspection from filters and entrance engine compartment by steps DUAL CROSS engine beds Hydraulic power steering Emergency steering installation (single engine only) Teak / stainless steel steering wheel ø700mm Fuel tank of advanced design with inspection-/ cleaning hatch, (approx. 2800 ltr.) Separate second (1x on engine) fuel filter with water separator (2x) Copper fuel pipe Fuel gauge Automatic water pressure system, incl. solid pvc watertank with inspection-/cleaning hatch. (approx. 960 ltr.) Water tank gauge Automatic pump for water system Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation placed in bilge aft cabin, front cabin and engine room. Equipped with float switch and changeover switch for manual or automatic operation for pumping and alarm Holding tank (toilet(s)) incl. Dockside-Discharge connection (approx. 480 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 3 main groups: engine (2x 50 Ah), domestic (6x 120 Ah) and generator (1x 50 Ah) 12 V. Sockets 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. 240V. shore power cable Fully automatic battery charger (1x 75 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Inverter 24V/1500 W. Linssen Variotop ; hydraulicly operated double lined and insulated convertible roof, that closes the wheelhouse watertight through a unique patented closing system Exterior finish Three-part teak doors for wheelhouse, the BB door is fixed and the middle and SB door can be opened Solid Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher ø120mm Teak deck box joint Linssen Grand Sturdy 500 logo on super structure; chromium In s t r u m e n t s Engine instruments (2x): rev. counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter Government approved navigation lights Compressor horn Linssen Yachts navigation package: - Raymarine ST-60 Tridata Additional VDO Voltmeter for 24V domestic circuit 20
Linssen Grand Sturdy 500 Variotop Mark II Royal Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on cabin deck and saloon deck Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Additional isolating coating in the wheelhouse Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows in anodised aluminium profiles Aluminium dropping window in saloon, at port side Aluminium dropping window in saloon, at starboard side. Aluminium opening portholes in the front cabin (4x) and aft cabin (6x) with plain glass, profile in hull color All windows of tinted glass (portholes in plain glass) All windows of toughened glass Double-glazed windows (Thermic Line) in all windows (the dropping windows are single-glazed) Aluminium ventilation-/escape hatch with tinted glass in forward coachroof (3x), incl. curtain Aluminium escape hatch in aft cabin Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail. Bow opening lockable by means of integrated stainless steel bar Integrated stern door (SB/Port) to swimming platform Integrated winding steps on SB and port side in transom, from swimming platform Stainless steel hinged side ladder integrated in side deck rail (Port and Starboard) Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non skid profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships-front and midships-stern 2x single Stainless steel bollards on bathing platform (2x) Handrail package: Handrails on saloon deck, cabin deck, Variotop arch and at the bathing ladder Extended bathing platform (including teak). Length o.a. will be 15,75 m instead of standard length from 14,98 m Solid Linssen pvc fendering from swimming platform to 1/3 of the hull length. Stainless steel protection set at bollards front/middle/ aft and at railing entrances in side decks. Aluminium Linssen design mast Sand Beige with crosstrees and stays Hydraulic mast folding system incl. control at steering position Integrated moulded aft deck dodgers. Integrated deck boxes, U-shaped aft bench with teak deck box joint. Cushions for the bench in imitation leather, colour cream. Teak table with folding section on aft deck Provisions in hull for hydraulic passerelle Interior finish Exclusive Linssen Yachts Mark II interior The wheelhouse is entirely cherry-timbered Storage in the dashboard for binoculars, digital maps, sunglasses, keys, cell phone etc. Deckhead lining of elegant finish with panels Interior in all compartments finished in cherry wood with inlaid Wenge-frames in all cupboards and drawers Anatomically moulded dinette-/ saloon settees, finished in leather, 2 club chairs in saloon port side (only with layout K2) Anatomically moulded settee in wheelhouse, finished in leather Curtains for all windows and ventilation-/escape hatches Two Stools cherry wood/leather, integrated under berth aft cabin (only layout A4) Original teak ship s floor with inlaid ash striping in all compartments Interior wardrobe in front cabin with lights Interior wardrobe in aft cabin with lights Interior provided with chromium / stainless-steel design fittings Door and locker furniture with push buttons Elegant solid wooden stair post with high polished stainless steel hand rail Luxury walnut wood dashboard with real saddlestitched leather trim Luxury saloon and dinette table with stainless steel fixed design support Comfortable electric adjustable Linssen design helmseat, with matching leather upholstery. Horizontally manual adjustable Two halogen reading lights in aft cabin and forward cabin Attractive bar in saloon including Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Stairs lighting Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in the pantry Cutlery tray in galley Bedtop in aft cabin hinged with gas pressurized cylinders, for easy access storage space / technical equipment under berth (only layout A4) Special slatted and sprung matrass bases in aft cabin and front cabin Mattresses in aft cabin, front cabin and guest cabin (layout O3) type Combi-spring 14cm Solid high polished stainless steel handrail at stairs to aft cabin Grab rail along front of galley (chromium) Wooden handrail on saloondeck (mid-ships) Eq u i p m e n t Electric refrigerator 110 l. with freezer compartment in galley Ceramic hob, stainless steel, 240V. 2x 1200 W. cooking zone 1x 2000 W. cooking zone 1x 2200 W. cooking zone Corian worktop in galley incl. stainless steel sink (1 1/2 model) Microwave/oven/grill 32 ltr. (stainless steel) in galley. Temperature range 30-250 degrees. Microwave power 100-1000W (240 V) Extractor with revolution regulator (240 V). Incl. 2x light points above hob integrated in wooden pillar Electrical toilet, fresh water flush (2x) Washbasin in front and aft cabin toilet-compartment, built into vanity unit. 21
Linssen Grand Sturdy 500 Variotop Mark II Royal Corian work tops in toilet compartments including integrated corian wash basin Complete luxury shower installation in front and aft cabin, with Corian shower tray and drainage pump. Selected bathroom fittings (mirror, toilet paperholder etc.) Tabs in chromium Shower door in shower aft cabin an front cabin Outside shower at bathing platform, flush mounted with warm- and cold water tap Linssen Yachts, thermostatic controlled, warm water heating with convector heaters in all compartments and design radiator in wet cel aft and front cabin. Heavy duty stainless steel windscreen wipers SB, middle and port with fresh water spray-installation Hydraulic anchor winch (1500W) above deck with integrated heavy duty stainless steel anchor rolls, anchor rail and mooringfacility. With 50m. 10mm. galvanised anchor chain and 30 kg. galvanised Bruceanchor Deck lighting with 2 lights in mast Stair lighting to bathing platform and in steps from side decks to aft deck. Stereo radio/cd changer incl.2 speakers in saloon and amplified radio antenna Set speakers in steering position Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box in impact resistance ABS, fitted in saloon cupboard Fire extinguishers (2 kg) in aft cabin, saloon, galley and wheelhouse Techncal details Hydrolubricated propeller shaft installation, waterproof and low vibration fitted with rubber clampseals into the steel outside tube. Stainless steel propeller shaft with AISI-316 in rubber bearings, Ø 40 mm Engine/shaft connection through homocinetic coupling and thrust bearing Special 4-bladed propellers (for less noise and vibration) Anodes depending on cruising area Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system (patented). Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Centre floor hatches in saloon hinged with gas pressurized cylinders for easy inspection from filters and entrance engine compartment by steps DUAL CROSS engine beds Hydraulic power steering Emergency steering installation (single engine only) Teak / stainless steel steering wheel ø700mm Electronic controls Mathers Micro Commander (chromium) Provisions for stern thruster; ducting mounted in stern including hydraulic pipes Hydraulic bow thruster 160 kgf (9,5 kw / 13 HP) Provisions for easily afterwards installation from stabilizers to prevent rolling of the ship; 2 mounting flanges welded in the hull Fuel tank of advanced design with inspection-/ cleaning hatch, (approx. 2800 ltr.) Separate second (1x on engine) fuel filter with water separator (2x) Copper fuel pipe Fuel gauge Generator 240V/7 kw, Intercooling, continous rating. Integrated in shore power connection. Remote control, Volt-, Herz-, Amp. and Rev. counter meter. Incl. water-/gas separator for generator exhaust Automatic water pressure system, incl. solid pvc watertank with inspection-/cleaning hatch. (approx. 960 ltr.) Water tank gauge Automatic pump for water system Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Deck wash pump incl. water hose and spray-pistol Electric bilge installation placed in bilge aft cabin, front cabin and engine room. Equipped with float switch and changeover switch for manual or automatic operation for pumping and alarm Holding tank (toilet(s)) incl. Dockside-Discharge connection (approx. 480 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 3 main groups: engine (2x 50 Ah), domestic (6x 120 Ah) and generator (1x 50 Ah) 12 V. Sockets 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. 240V. shore power cable Fully automatic battery charger (1x 75 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Inverter 24V/1500 W. Engine room lighting with switch and indicator in switch panel Linssen Variotop ; hydraulicly operated double lined and insulated convertible roof, that closes the wheelhouse watertight through a unique patented closing system Hydraulically controlled collapsible parking arch for the Variotop. Can be lowered to reduce the maximum airdraft to approx. 350 cm. Exterior finish Three-part teak doors for wheelhouse, the BB door is fixed and the middle and SB door can be opened Original Linssen teak deck on fore deck, side decks, aft deck, incl. teak steps of side decks to the aft deck Original Linssen teak deck on swimming platform and stairs to aft deck Solid Linssen pvc fendering around swimming platform 22
Linssen Grand Sturdy 500 Variotop Mark II Royal Original Linssen synthetic fiber rope fender with stainless steel stretcher ø120mm Ships name on bow and stern. Port of registry and registration number on stern Teak deck box joint Solid teak table with folding section on aft deck. Linssen Grand Sturdy 500 logo on super structure; chromium In s t r u m e n t s Engine instruments (2x): rev. counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter Government approved navigation lights Compressor horn Linssen Yachts Lake navigation package, existing: - Raymarine ST-60 Tridata - Compass incl. ST-60 transducer - Raymarine autopilot with ST-6001 display - DSC VHF installation - C80, 8.4 colour LCD chart plotter at steering position incl. Raystar 120 GPS/SD sensor Including Navionics Gold XL9 marine chart type 28XG Additional VDO Voltmeter for 24V domestic circuit Canvas and covers Cover for Variotop 23
All yachts of the Linssen Grand Sturdy series include the 3 Years Linssen Yachts Warranty-plan and comprehensive delivery package consisting of full fuel tanks, testing and adjusting all the fitted accessories and navigation instruments, carrying out a full handover programme, with detailed technical instruction, during delivery at the factory. Comprehensive selection of instruction manuals including ships papers (owner manual, systemdiagramms, drawings etc.), spare parts package with touch up paint, waste tank liquid, spare bulbs etc. Detailed information about the entire Linssen Yachts collection is available at the shipyard or from your local agent. The interior and exterior drawings, the fitting out schedule and the basic information supplied are subject to change at any time without prior notice. The illustrations may show special features which are not included in our standard package. Please check with the Boatyard or your local Linssen representative. The information given in our documentation has been compiled with the utmost care. Please take into account, however, that every Linssen is built according to a specific fitting-out programme, layout and composition, and that the standard specification may be subject to change at any time without prior notice. The performance data for all Linssen yachts are given in good faith, but no single case can be guaranteed for any type of boat/ engine. The condition of the propellers, plant and algea growth below the waterline, the condition of the engines, the water temperature, the ambient air temperature, the weight of the fuel and on-board water and the weight of the supplies on board will affect the way your boat behaves. Definitive performance guarantees are therefore impossible. Linssen Ya c h t s B.V. Brouwersstraat 17, Postbus 7172, NL-6050 AD Maasbracht Tel. +31 (0)475-43 99 99, Fax +31 (0)475-43 99 90 info@linssenyachts.com www.linssenyachts.com Maasbracht, 01.12.2008 SE&O - Version 16, 2008 24