Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures, all requirements of ISO/IEC 17025:2005 General Requirements for the competence of Testing and Calibration Laboratories.* The accredited lab has demonstrated technical competence to a defined Scope of Accreditation and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Accreditation valid through: December 23, 2019 R. Douglas Leonard, Jr., President, COO Laboratory Accreditation Bureau Presented the 23 rd of December 2016 *See the laboratory s Scope of Accreditation for details of accredited parameters **Laboratory Accreditation Bureau is found to be in compliance with ISO/IEC 17011:2004 and recognized by ILAC (International Laboratory Accreditation Cooperation) and NACLA (National Cooperation for Laboratory Accreditation). Form 28.1 Rev 1 7/3/13
Scope of Accreditation For Analysts, Inc. 2450 Hassell Road Hoffman Estates, IL 60195 Sharon Wagner 847-884-7877 In recognition of a successful assessment to ISO/IEC 17025:2005, accreditation is granted to Analysts, Inc. to perform the following tests: Accreditation granted through: December 23, 2019 Testing Chemical Technology Accelerated Stability OCM Accelerated Stability Total Acid Number ASTM D664 Mod Oil Total Acid Number ASTM D974 Mod Oil, API Gravity ASTM D287 Oil, Hydrometer Appearance ASTM D4176 Properties of Coolants OCM Properties of Coolants Coolant Ash Content ASTM D482 Oven Microorganisms OCM - Microorganisms Any Fluid Total Base Number ASTM D4739 Mod Oil Total Base Number OCM-TBN Oil Biodiesel Content by FTIR IL-BioDiesel Oven Carbon Residue ASTM D524 Oven Cetane Index, Calculated ASTM D976 ASTM D4737 Chlorides IL-MWF-2011 MWF Calculation Cloud Point ASTM D2500 Form 28.6 Revision 5 05/23/06 Page 1 of 4
Technology Cold Flow Plug Point ASTM D6371 Color, ASTM ASTM D1500 Any Fluid Color, Gardner and Sayboldt ASTM D1500 Oil By Conversion Conductivity IL-MWF- Conductivity MWF Copper Strip Corrosion ASTM D130 Oil, Density Specific Gravity ASTM D1298 Oil, Hydrometer Dielectric Breakdown ASTM D877 Oil Distillation ASTM D86 Ferrography, Analytical ASTM D7690 Any Fluid Microscope Ferrography DR OCM DR3 Oil Ferrography DR OCM DR7 Oil ELC Coolant Inhibitor OCM ELC Test Strip Coolant Flash Point Closed Cup ASTM D93 Oil, Flash Flash, Fire Point Open Cup ASTM D92 Oil, Flash Freeze Point of Coolant IL-Coolants-FZPT Coolant FTIR Infrared Analysis OCM - FTIR Any Fluid Dilution by GC IL-FDD by GC Oil GC Glycol ASTM D2982 Oil Glycol OCM BP Glycol Oil Positive/Negative Estimate of Net & Gross Heat of Combustion Heat of Combustion of Liquid Hydrocarbon s by Bomb Calorimeter ASTM D4868 Calculation ASTM D4809 Thermal Analysis Karl Fischer Water ASTM D6304 Oil Lubricity by HFRR ASTM D6079 Metals by ICP ASTM D5185 Mod Any Fluid ICP Form 28.6 Revision 5 05/23/06 Page 2 of 4
MWF-Brix Technology MWF- Iron Chip Corrosion MWF- Dirt by Filtration MWF- Free Oil MWF- ph & Alkalinity MWF-Tramp Oil IL-MWF-2011 IL-MWF-CICC IL-MWF -DIRT IL-MWF-Free oil IL-MWF- ph & ALK IL-MWF-Tramp oil Aqueous & Gravimetric Gravimetric Volumetric Volumetric Nitrites OCM - Nitrites Coolant Particle Count, Laser ISO 11500 Oil Particle count Particulate Contamination ASTM D5452 ASTM D6217 Pentane & Toluene Insolubles ASTM D893 Oil, ph of Coolants ASTM D1287 Coolant Pour Point ASTM D97 Refrigerants, Testing of Low & High Pressure II-Refrig Refrigerant Reserve Alkalinity ASTM D1121 Coolant Sulfated Ash ASTM D874 Oil, Sulfur in Petroleum by XRF Spectrometer Sulfur, Total by UV Fluorescence ASTM D4294 ASTM D5453 Oil, Total Hardness (CaCO3) IL-MWF-2011 MWF Varnish by Quantitative Spectrophotometric Analysis (QSA) Spectroscopy XRF Visible Spectroscopy UV Visible IL 2005-QSA Oil Miscellaneous Viscosity ASTM D445 Oil, Viscosity ASTM D7279 Mod Oil, Viscosity Index ASTM D2270 Oil Calculation Viscosity, SUS Calculated ASTM D2161 Any Fluid Calculation Form 28.6 Revision 5 05/23/06 Page 3 of 4
Technology Water and Sediment Water Percent Estimate by Hotplate Notes: 1. This laboratory offers commercial testing service. 2. Mod Modified test method. ASTM D2709 ASTM D4007 Mod ASTM D1796 Mod OCM Water by Hotplate Oil, Oil Centrifuge Approved by: Date: December 23, 2016 R. Douglas Leonard Chief Technical Officer Re-issued: 12/23/16 Form 28.6 Revision 5 05/23/06 Page 4 of 4