RM27 MULTI-TOOL CARRIER POWER BROOM STUMP CUTTER BRUSH CUTTER PUSH BLADE BUCKET TILLER CALL - 800.392.2686 VISIT -
Easy to operate attachment system Attachment plate with single pin locking mechanism Hydraulic quick couplers to power work tools 13.8gpm hydraulic flow provides power that rivals dedicated machines 7-inch wide rubber tracks Year-round traction and flotation 2-speed travel Optional non-marking rubber tracks Kohler Command gasoline engine 26.5hp fuel injected The RM27 MULTI-TOOL CARRIER is a new platform for operating Heavy duty dual element air cleaner a variety of work tools, including the stump cutters, tillers, trenchers, 3 year Kohler limited warranty brush cutters, snow throwers, power brooms, push blades, and more. This unique machine provides operators with an economical and versatile tool carrier capable of utilizing a variety of implements. The RM27 maximizes profit by powering work tools at a fraction of the price of owning a dedicated machines.
RM27 MULTI-TOOL CARRIER Beltless Hydraulic Drive on Powered Work-Tools Quick Disconnect Hydraulic Couplers Easy to Use Attachment Plate Coupling System Hydraulic Oil Cooler Operator-Friendly Controls Centrifugal Precleaner 13.8 GPM Powerful Hydraulic System to Operate Work Tools and Attachments Kohler 26.5hp EFI Gasoline Engine Independent Controls for Left/Right Tracks Hour Meter Two-Speed Travel 7 wide (180mm) Rubber Tracks (left) Optional Non-Marking Tracks Available (right)
PUSH BLADE Constructed of ¼-inch steel Replaceable wear edge 47¾-inch width Articulation angle 25 degree left and right STUMP CUTTER 15½-inch cutter wheel 18 Rayco Super Tooth cutter tools Beltless cutter wheel drive Cuts 30 w x 24 d x 27 h BRUSH CUTTER 44-inch cutting width 2 swinging cutter blades Deck constructed of 10 gauge steel POWER BROOM 43-inch working width Articulation angle 16 degree left and right The RM27 MULTI TOOL CARRIER adds capability to your business for minimal cost. For a fraction of the price of dedicated machines, the RM27 is ready to take on multiple tasks by simply switching out attachments. The wide variety of work tool attachments help you accomplish almost any landscape or property maintenance project, from snow removal to garden tilling. Attachments are designed to be simple to operate and maintain with beltless hydraulic drive and heavy duty construction. And the RM27 s hydraulic system is rugged enough to operate power hungry attachments like stump cutters and trenchers. BUCKET Constructed of 10 gauge steel 300-pound load capacity 35-inch wide x 19-inch deep Serrated cutting edge TILLER Working width 25 ½-inches Maximum depth 6-inches Power to till in hard-packed soil
RM27 MULTI-TOOL CARRIER SPECIFICATIONS GENERAL US METRIC Weight 1,100 lb 499 kg Length 69.5 176.53 cm Height 48.5 123.19 cm Width 35.5 90.17 vm Tracks 7 Wide Rubber 17.78 cm Travel Speed (low/high) 1mph / 1.7mph 1.6 km/h / 2.74 km/h ENGINE Model Kohler ECH749 Kohler ECH749 Gross HP 26.5 hp Fuel Injected 19.8 kw Fuel Injected Fuel Tank Capacity 9 gal 34.1 L HYDRAULIC SYSTEM Oil Tank Capacity 5.87 gal 22 L Pump Flow to Tool Attachment 13.8 gpm 52.2 L/min Attachement Tool Maximum Pressure 3,000 psi 207 Bar All rights reserved to Rayco Manufacturing, Inc. All research is done by Rayco. All statements are expressed under the strict supervision of Rayco. If any of the statements should be false or incorrect, Rayco might consider altering these. Rayco Manufacturing Inc. retains the right to make changes in design and specifications; engineering; add or remove features; add improvements; or discontinue manufacturing at any time without notice or obligation. All claims and statements on this document are not legally binding, and are subject to change. No legal obligations can be derived from this document. YEAR ROUND VERSATILITY TO TACKLE ANY JOB RM27 shown with POWER BROOM RM27 shown with BRUSH CUTTER RM27 Multi-Tool Carrier February 2017 Made and Printed in the USA Copyright 2016 RAYCO Manufacturing, Inc., Wooster, OH 44691