NEW s ANCHOR SHACKLES Bolt, Nut and Cotter 16 Stainless Steel...NI4 Carbon Steel Bodies...NI Round Pin 16 Stainless Steel...NI4 Carbon Steel Bodies...NI Screw Pin 16 Stainless Steel...NI4 Carbon Steel Bodies...NI Hot-dipped Galvanized...NI CHAIN Grade 0 Proof Coil...NI8 Grade 4 High Test...NI8 Grade 50 Lifting, Stainless Steel...NI0 Grade 70 Transport (Binding)...NI5 Assemblies...NI5 HERC-ALLOY 800 (Grade 80)...NI18 HERC-ALLOY 1000 (Grade 100)...NI18 Industrial, Stainless Steel...NI1 Jack Carbon Steel...NI9 Stainless Steel...NI9 Lock Link...NI9 Passing Link...NI9 Safety Brass Plumbers...NI40 Stainless Steel...NI40 Sash...NI40 Carbon Steel...NI40 Stainless Steel...NI40 Straight Link Coil...NI40 Straight Link Machine...NI41 Twist Link Coil...NI40 Twist Link Machine Carbon Steel...NI41 Stainless Steel...NI41 Twin Loop Carbon Steel...NI41 Stainless Steel...NI41 HOISTS Hand Chain Cyclone...NI4 Hurricane 60...NI4 Series 6...NI4 Lever Operated Bandit...NI4 Puller...NI4 Series 65...NI4 HOIST RINGS Flip-Flop...NI47 Heavy Duty Fractional...NI45 Metric...NI45 Stainless Steel Safety Engineered Fractional...NI46 Metric...NI46 HOOKS Clevlok, Grade 100 Cradle Grab...NI Sling with Latch...NI Direct Connect...NI56 Eye Sling with Latch Grade 80...NI Grade 100...NI HOOKS (Cont.) Grade 4 High Test and Grade 0 Proof Coil Clevis Grab Hook...NI9 Clevis Slip Hook...NI9 Clevis Slip Hook with Latch...NI9 Eye Grab Hook...NI9 Eye Slip Hook...NI9 Eye Slip Hook with Latch...NI9 Grade 70 Transport (Binding) Clevis Grab, Grade 80...NI6 Clevis Slip, Grade 70...NI6 Latchlok, Grade 100 Bushing Swivel Style...NI4 Clevlok Style...NI4 Eye Style...NI4 Stainless Steel Clevis Grab Hooks...NI1 Clevis Slip Hooks with Latch...NI1 S-Hooks, Stainless Steel...NI9 U-Hooks, Stainless Steel...NI9 Weld-On Lifting...NI5 LINKS Anodized Spring...NI8 Connecting Carbon Steel...NI6 Stainless Steel, Cast...NI6 Stainless Steel, Forged...NI6 Coupling, Stainless Steel...NI0 Hammerlok Coupling Grade 80...NI19 Grade 100...NI19 Lap Carbon Steel...NI6 Stainless Steel...NI6 Master Grade 80...NI0 Grade 100...NI0 Stainless Steel...NI0 Quick, Stainless Steel...NI7 Spring Carbon Steel...NI9 Stainless Steel...NI9 LOAD BINDERS QuikBinder PLUS Ratchet...NI7 Ratchet Type...NI7 SHACKLES LONG REACH Bolt, Nut and Cotter...NI5 Screw Pin...NI5 SLINGS Adjust-A-Link, Chain...NI58 Grade 80, Chain Single Oblong Links Both Ends...NI64 Single 1 Leg...NI64 Single Hooks Both Ends...NI65 Double Legs...NI66 Triple Legs...NI67 Quad 4 Legs...NI68 Grade 100, Chain Single Hooks Both Ends...NI59 Single 1 Leg...NI60 Double Legs...NI61 Triple Legs...NI6 Quad 4 Legs...NI6 Permaloc Wire Rope Sliding Choker...NI57 Two Leg Bridle...NI57 SLINGS (Cont.) Permaloc Wire Rope, Eye and Eye...NI56 Roughneck Wire Mesh Triangle and Choker...NI58 Tool Box, Chain, Grade 80...NI44 Tuff-Edge...NI7 Tuff-Edge Web One Ply Flat Eye (Type )...NI48 Two Ply Flat Eye (Type )...NI48 One Ply Endless (Type 5)...NI49 Two Ply Endless (Type 5)...NI49 Tuflex...NI7 Tuflex Roundslings Endless...NI55 Eye and Eye...NI55 Webmaster 100 Polyester Web One Ply Flat Eye (Type )...NI5 Two Ply Flat Eye (Type )...NI5 One Ply Endless (Type 5)...NI54 Two Ply Endless (Type 5)...NI54 Webmaster 1600 Nylon Web One Ply Flat Eye (Type )...NI5 Two Ply Flat Eye (Type )...NI5 One Ply Triangle and Choker (Type 1)..NI5 One Ply Twisted Eye (Type 4)...NI5 Webmaster 1600 Polyester Web One Ply Flat Eye (Type )...NI50 Two Ply Flat Eye (Type )...NI50 One Ply Endless (Type 5)...NI51 Two Ply Endless (Type 5)...NI51 Wear Pads for Slings...NI56 SNAPS Brass Finish...NI8 Nickel Finish...NI8 Stainless Steel Double Bolt...NI7 Swivel Bolt...NI7 Zinc Finish...NI8 SUB-ASSEMBLIES Grade 80...NI1 Grade 100...NI1 Stainless Steel...NI0 TAGS Sling Identification Stamped...NI19 Forged...NI19 Stainless Steel...NI0 TIEDOWN ASSEMBLIES AND ACCESSORIES Load Hugger Cam Style...NI69 Ratchet Style...NI69 E-Track Assemblies...NI7 Series 5,000...NI70 Series 10,000...NI70 Winches...NI71 Winch Assemblies...NI71 Winch Bar...NI71 TRITON PRODUCTS Pegboard Systems/Accessories...NI NI17 TURNBUCKLES Stainless Steel Eye and Eye...NI7 Jaw and Jaw...NI7 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI1
NEW s Tempered Pegboard Tempered hardwood, 1/4" commercial-grade pegboard will not fray or dry out like standard paper-based pegboard. Holds two times the weight of standard pegboard and is compatible with all DuraHook products. Height Thickness 4 1/4 19600² 48 4 1/4 196070² 4 19600²196070² DuraBoard DuraBoard is a heavy-duty white polypropylene pegboard Four times greater holding power than traditional pegboard Durable, weather-resistant and washable Full 1/4" thick for maximum holding capacity Board surface is ideal for creating silhouettes of tools to be stored and managed Ideal for DuraHook pegboard hook and standard pegboard hooks Height Thickness 4 1/4 195988² 48 4 1/4 195965² 4 96 48 1/4 19598² 1 Kits of Panels Total Square Feet of Hooks and Bin Clips of Bins 16 48 4 19599² 1 4 96 8 19607² 1 19599² An assortment of DuraHook locking pegboard hooks, plastic hanging bin system, wall mounting hardware and spacer system. Spacer Kit Eliminates framing hassles and expense; requires no special tools. Includes 15 pieces of each: " #1 wood screws, plastic wall anchors and /8 steel wall spacers. 19609² 15 MagClip Magnetic tool storage mounting system for use with 1/4" or 1/8" pegboard Holds tool securely without the use of hooks or bars Description MagClip pack 196010² 1 MagClip 5 pack 19606² 1 NI USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s DuraHook The first true, patented, double-locking hook that fits both 1/8" and 1/4" pegboard and DuraBoard products just by changing the special LocScrews included in each pack Hooks mount vertically or horizontally and combine with other hooks to create custom storage options for virtually any tool shape and weight Hooks mount from the front Designed and tested to meet the toughest commercial and industrial applications Double-locking system ensures stored items and hooks always stay in place Incorporate hanging bins into any pegboard application using BinClips ( No 195971) Eliminate pegboard framing and mounting hassles and expense by using Spacer and Mounting Kit ( 19609) Single Rod Bend Angle (Degree) Bend Height Rod Dia. 1 0 1 /16 196068² 10 1-1/8 90 1/ /16 196016² 10-1/ 0 1/ /16 195960² 10 -/4 90 1/ /16 19594² 10 4 0 1/ /16 195977² 10 6 0 1/ 1/4 195940² 10 6 90 1/ 1/4 196015² 10 8 0 1/ 1/4 196054² 5 Double Rod Bend Angle (Degree) Bend Height Rod Dia. Inside -/4 80 /4 1/4 1-5/8 19590² 10 5-/4 80 /4 1/4 1-5/8 195970² 10 8-1/4 80 /4 1/4 1-5/8 1959² 5 Pliers Holder Inside /4 19600² 10 Multi-Prong Tool Holder Rod Dia. Inside 1-/8 8-1/8 /16 7/16, 1/16 196040² 5 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI
NEW s DuraHook The first true, patented, double-locking hook that fits both 1/8" and 1/4" pegboard and DuraBoard products just by changing the special LocScrews included in each pack Hooks mount vertically or horizontally and combine with other hooks to create custom storage options for virtually any tool shape and weight Hooks mount from the front Designed and tested to meet the toughest commercial and industrial applications Double-locking system ensures stored items and hooks always stay in place Incorporate hanging bins into any pegboard application using BinClips ( No 195971) Eliminate pegboard framing and mounting hassles and expense by using Spacer and Mounting Kit ( 19609) Spring Clip Projection From Wall Holding Range 7/8 1/4 1/ 195995² 10 1-1/8 1/4 1/ 196019² 10 1-7/16 1/ 1 196071² 10-1/8 /4 1-1/4 195958² 10-7/8 1-7/8 -/4 196048*² 5 *Spray can holder 195995²196019²196048*² 196071² 195958² Ring Tool Holder Multi-Ring Tool Holder 19601²196076² Type I.D. Rod Dia. Tool Holder, Single Ring 1-/8 /4 /16 19601² 10 Tool Holder, Double Ring 1-7/8 /4 1/4 196076² 10 I.D. 1-5/8 9 /4 196009² NI4 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s DuraHook The first true, patented, double-locking hook that fits both 1/8" and 1/4" pegboard and DuraBoard products just by changing the special LocScrews included in each pack Hooks mount vertically or horizontally and combine with other hooks to create custom storage options for virtually any tool shape and weight Hooks mount from the front Designed and tested to meet the toughest commercial and industrial applications Curved Hook 19595² Double-locking system ensures stored items and hooks always stay in place Incorporate hanging bins into any pegboard application using BinClips ( No 195971) Eliminate pegboard framing and mounting hassles and expense by using Spacer and Mounting Kit ( 19609) U-Shape Inside -1/8 1-/4 19595² 5 195947² Rod Dia. I.D. -1/4 /16 195947² 10 -/4 1/4 -/ 19595² 10 Double Closed End Loop Bend Angle (Degree) Height Rod Dia. Inside 5 80 /16 -/4 19600² 5 8 0 /16 -/4 19605² 5 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI5
NEW s DuraHook The first true, patented, double-locking hook that fits both 1/8" and 1/4" pegboard and DuraBoard products just by changing the special LocScrews included in each pack Hooks mount vertically or horizontally and combine with other hooks to create custom storage options for virtually any tool shape and weight Hooks mount from the front Designed and tested to meet the toughest commercial and industrial applications Shelf Double-locking system ensures stored items and hooks always stay in place Incorporate hanging bins into any pegboard application using BinClips ( No 195971) Eliminate pegboard framing and mounting hassles and expense by using Spacer and Mounting Kit ( 19609) Kits Depth Load Rating 1 6 100 195984² 1 Description DuraHook Kit 4 Hooks, Bins 195976² 1 DuraHook Kit 6 Hooks 195944² 1 DuraHook Kit 60 Hooks, 4 Bins 195941² 1 DuraHook Kit 79 Hooks, 4 Bins 195997² 1 DuraHook Kit 85 Hooks, 10 Bins 19599² 1 BinClip 195971² 5 NI6 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s LocMat LocMat magnetic roll sheeting is a commercial-grade solution for silhouetting and visually managing tools on steel LocBoards and steel pegboards. The sheets are easily cut and can be used to outline unlimited types of tools and other items. This allows the user to maximize space on the tool board, return items to their proper places when the job is complete and quickly identify items that are missing. Constructed of strontium ferrite to ensure strong bonding ability Chlorinated polyethylene vinyl laminate surface allows tools to be easily traced Durable, weather-resistant hand washable with mild detergent Commercial-grade 6 lbs. pull per square feet keeps product in place when tools are removed and replaced Compatible with LocBoard, flat steel surfaces or steel pegboards Thickness (mil) Color 1 0 Black 19597² 1 60 1 0 Blue 19591² 1 1 0 Red 19605² 1 LocBin BinKit DuraHook BinKits provide a commercial-grade bin storage solution to securely store loose parts and tool accessories on a pegboard. BinKits include BinClips that attach and lock to the pegboard and LocBin Plastic Hanging Bins that mount on each BinClip. This allows for an individual bin to be placed on the pegboard or several bins can be interlocked then hung on the pegboard near the first bin. Choose from three sizes to accommodate your storage needs. BinKits include BinClips that attach and lock to the pegboard and LocBin Plastic Hanging Bins that mount on each BinClip Outside Outside Outside Height Capacity of Color Bin Clips 5-/8 4-1/8 1 Yellow 4 195918² 4 7-/8 4-1/8 1 Yellow 4 196044² 4 10-7/8 11 5 55 Yellow 18 19601² 6 195918² 196044² 19601² USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI7
NEW s LocBoard Offering heavy-duty storage solutions that will always ensure the ultimate in holding strength All steel boxed construction with hidden mounting flanges Highest industry load ratings Surface of board is ideal for silhouetting tools and other stored items Boards can be securely mounted horizontally or vertically Mounting hardware is hidden for a clean, durable appearance Attaches to walls, benches, tool carts, wire cages and other vertical surfaces Accommodates all LocHooks Epoxy powder-coated finish Three board sizes to choose from Height Thickness Color 4 9/16 Blue 19604² 4 4 9/16 Tan 1960² 4 9/16 White 19599² 4 9/16 Blue 19607² 4 4 9/16 Tan 196049² 4 9/16 White 196075² 18 9/16 Blue 19601² 6 18 9/16 Tan 195981² 18 9/16 White 19608² Tools not included Kit Mounting Kit 196006² 4 Includes an assortment of LocHook locking hooks for steel pegboard with square holes, plastic hanging bin system and mounting hardware. of Panels Total Square Feet of Hooks and Bin Clips of Bins 9 8 4 196060² 1 NI8 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s LocHook Patented - and 4-point contacts attach to LocBoard for metal-to-metal holding confidence Hooks can be mounted vertically or horizontally and can be combined with other hook styles to create custom storage solutions for virtually any tool shape or weight Single Rod Special LocScrews hold hooks securely in place horizontally and vertically and prevent any accidental removal Heavy-duty steel construction, zinc-plated with chromate dip to offer years of secure holding power Use with LocBoard steel pegboards with square holes Double Rod Bend Angle (Degree) Bend Height Rod Dia. 1/ 0 /4 /16 196045² 5 1 0 1/ /16 195978² 5 1 90 5/8 /16 195954² 5 1-1/ 0 /16 195999² 5 90 5/8 /16 1959² 5 0 /16 19597² 5 0 1/ 1/4 19601² 5 4 0 1/ /16 196000² 5 6 90 /4 1/4 196061² 5 8 0 1/ 1/4 19604² 5 Bend Angle (Degree) Bend Height Rod Dia. Inside 1 0 1/ /16 1-11/ 196004² 5 1 90 /4 /16 1-11/ 195968² 5 0 1/ /16 1-11/ 195948² 5 0 1/ /16 1-11/ 195998² 5 90 /4 /16 1-11/ 196058² 5 4 90 /4 1/4 1-5/8 1960² 5 5-/4 80 /4 1/4 1-5/8 196059² 5 Pliers Holder Inside 1-/8 1-/4 19596² 5 Multi-Prong Tool Holder Rod Dia. Inside 1-1/ 8-1/8 /16 7/16, 1/16 195989² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI9
NEW s LocHook Patented - and 4-point contacts attach to LocBoard for metal-to-metal holding confidence Hooks can be mounted vertically or horizontally and can be combined with other hook styles to create custom storage solutions for virtually any tool shape or weight Ring Tool Holder Special LocScrews hold hooks securely in place horizontally and vertically and prevent any accidental removal Heavy-duty steel construction, zinc-plated with chromate dip to offer years of secure holding power Use with LocBoard steel pegboards with square holes Multi-Ring Tool Holder 196064² 19600²19605² I.D. 1-1/8 1/ 19605² 5 1-5/8 1 19600² 5-1/ 1-/4 196064² 5 I.D. 1-5/8 9 /4 19605² Spring Clip 196050² 19591²196069² 196069² 19597²19598² 195945² Projection From Wall Holding Range 7/8 1/4 1/ 196050² 5 1-1/4 1/4 1/ 19591² 5 1-1/ 1/ 1 196069² 5 /4 1-1/4 19597² 5 -/4 1 19598² 5 -/4 1-1/ -/4 195945² 5 Curved Hook BinClip Rod Dia. I.D. -1/4 /16 19607² 5 -/4 1/4 -/ 1959² 5 19607² 1959² 1960² 5 NI10 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s LocHook Patented - and 4-point contacts attach to LocBoard for metal-to-metal holding confidence Hooks can be mounted vertically or horizontally and can be combined with other hook styles to create custom storage solutions for virtually any tool shape or weight Double Closed End Loop Special LocScrews hold hooks securely in place horizontally and vertically and prevent any accidental removal Heavy-duty steel construction, zinc-plated with chromate dip to offer years of secure holding power Use with LocBoard steel pegboards with square holes Shelf 195916² 19604² Bend Angle (Degree) Height Rod Dia. Inside 5 80 /16 -/4 195916² 5 8 0 /16 -/4 19604² 5 Depth Load Rating 18 6-1/ 100 19599² 1 Kits 19594² 195985² Description LocHook Kit 46 Hooks 19594² 1 LocHook Kit 6 Hooks 195985² 1 LocHook Kit 8 Hooks, Bins 195967² 1 195967² USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI11
NEW s Stainless Steel LocBoard Constructed of 04 brushed stainless steel with square holes that accommodate stainless steel LocHooks Perfect storage solution for sterile or harsh environments in health, medical, food, marine industry and commercial applications Sturdy mounting flanges make it easy to attach LocBoards to almost any wall or other vertical surface Box construction eliminates the need for spacers between board and wall Stainless steel LocBoards have a lifetime warranty and will not rust or corrode in extreme hot or cold temperatures Includes stainless steel mounting screws that will be hidden from sight after installation, providing a clean and attractive appearance Commercial construction allows for years of heavy-duty use while maintaining a shiny, polished surface Kit Height Thickness 6 18 9/16 19596² 1 of Panels Total Square Feet of Hooks and Bin Clips of Bins 9 19595² 1 Mounting Kit 196041² 4 NI1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Stainless Steel LocHook Patented stainless steel LocHooks with - and 4-point interlocking tabs attach vertically or horizontally, locking to stainless steel LocBoard with stainless metal screws repositioning hooks will not damage the board. LocHooks are offered in unique styles, including extended and standard spring clips, and BinClips to mount plastic hanging bins Heavy-duty boxed stainless steel construction offers years of dependable holding power, especially for heavy or oddshaped items Single Rod Stainless steel LocHook used with stainless steel LocBoard provide a stainless storage solution, ideal for medical, health care, restaurant, food, marine and commercial applications made from 04 brushed stainless steel Lifetime warranty won t rust or corrode, even in extreme temperatures Double Rod 1959² Bend Angle (Degree) Bend Height Rod Dia. 1 0 1/ /16 195946² 0 1/ 1/4 1959² 6 90 /4 1/4 19606² 195946² 19606² Bend Angle (Degree) Bend Height Rod Dia. Inside 4 90 /4 1/4 1-5/8 19604² Spring Clip Curved Hook 195987² Projection From Wall Holding Range 7/8 /4 1-1/4 195987² 1 195964² -/4 1/4 1/ 19598² 195964² 19598² Rod Dia. I.D. -1/4 /16 195917² USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI1
NEW s Stainless Steel LocHook Patented stainless steel LocHooks with - and 4-point interlocking tabs attach vertically or horizontally, locking to stainless steel LocBoard with stainless metal screws repositioning hooks will not damage the board. LocHooks are offered in unique styles, including extended and standard spring clips, and BinClips to mount plastic hanging bins Heavy-duty boxed stainless steel construction offers years of dependable holding power, especially for heavy or oddshaped items Multi-Prong Tool Holder Stainless steel LocHook used with stainless steel LocBoard provide a stainless storage solution, ideal for medical, health care, restaurant, food, marine and commercial applications made from 04 brushed stainless steel Lifetime warranty won t rust or corrode, even in extreme temperatures Multi-Ring Tool Holder Inside 1-1/ 8-1/8 1/, /4 196055² 1 I.D. 1-7/8 9 /4 195949² 1 Shelf BinClip Depth Load Rating 18 6-1/ 100 195980² 1 195915² NI14 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s XtraWall Pegboard Swing Panel Storage Systems XtraWall heavy-duty double-sided panel systems are designed to hold a large amount of tools and parts in a fraction of the wall space normally required. These turnkey systems offer dense tool storage on minimal wall surface by expanding the pegboard storage surface when wall space is at a premium. Steel pivot wall brackets can be mounted to cement block or wood stud walls. Wood stud installation will require " x 6" headers (not provided). Wall mounting bracket and hardware are included. For best holding results on XtraWall swing panels, use DuraHook locking hooks. Height of Panels Swing Radius Load Rating 4 1 75 195991² 1 48 4 550 195956² 48 1 56 475 19590² 1 7 48 1 56 575 19598² 1 48 1 56 575 196046² 1 195956² Tools not included DuraBoard Tool Cart with Tray DuraBoard mobile tool cart is equipped with industrialstrength, impact-resistant 1/4" thick polypropylene pegboards and has a 650 lb. load rating, sq. ft. of storage space and 8 sq. ft. of tray space. Use with DuraHook double-locking pegboard hooks for secure storage solutions that can be conveniently transported within a service environment. Dual-sided storage allows users to effciently organize, manage and store precision tools, hand tools, equipment and small parts without clutter Tools and equipment can be transported virtually anywhere within a plant or service environment a secure locking system ensures items stay in place Pull handle and durable neoprene casters ( fixed and swivel locking) make it easy to roll the mobile tool carts anywhere across flat surfaces Fully-visible storage system improves tool accountability and proper tool usage while increasing overall performance Height Depth Load Rating 51-1/ 48 9-/4 650 196014² 1 Tools not included Narrow base allows the user to transport tools around tight corners and through narrow door openings s can be secured on the tool cart with locking DuraHook Cart frames are made of extra heavy-duty 10 gauge aluminum and equipped with a sturdy aluminum bottom tray for tool boxes, paint cans, lumber and large items Highest load rating in the industry! USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI15
NEW s LocBoard Dual-sided storage allows users to effciently organize, manage and store precision tools, hand tools, equipment and small parts without clutter Tools and equipment can be transported virtually anywhere within a plant or service environment a secure locking system ensures items stay in place Pull handle and durable neoprene casters ( fixed and swivel locking) make it easy to roll the mobile tool carts anywhere across flat surfaces Fully-visible storage system improves tool accountability and proper tool usage while increasing overall performance Narrow base allows the user to transport tools around tight corners and through narrow door openings Cart frames are made of extra heavy-duty 10 gauge aluminum and equipped with a sturdy aluminum bottom tray for tool boxes, paint cans, lumber and large items Tools not included Highest load rating in the industry! s can be secured on the tool cart with LocHooks with - and 4-point contact locking features Tool Cart with Tray Tool Cart System Height Depth Load Rating 9-1/4 6-/4 1-1/4 800 195959² 1 46 48 6-5/8 850 195919² 1 Includes 56 piece LocHook assortment and 4 LocBins Height Depth Load Rating 9-1/4 6-/4 1-1/4 800 195975² 1 NI16 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Stainless Steel LocBoard Dual-sided storage allows users to effciently organize, manage and store precision tools, hand tools, equipment and small parts without clutter Tools and equipment can be transported virtually anywhere within a plant or service environment a secure locking system ensures items stay in place Pull handle and durable neoprene casters ( fixed and swivel locking) make it easy to roll the mobile tool carts anywhere across flat surfaces Fully-visible storage system improves tool accountability and proper tool usage while increasing overall performance Narrow base allows the user to transport tools around tight corners and through narrow door openings Cart frames are made of extra heavy-duty 10 gauge aluminum and equipped with a sturdy aluminum bottom tray for tool boxes, paint cans, lumber and large items Highest load rating in the industry! Tool Cart with Tray The stainless steel tool cart is manufactured to be the ideal mobile storage solution for medical, food and marine environments when used with stainless steel LocHooks. The sturdy frame is constructed of anodized aluminum and the stainless steel LocHook Tools not included pegboards are made of 04 brushed aluminum that will not corrode or rust, even in extreme temperature changes! It has 18 sq. ft. of storage surface with 4.9 sq. ft. of tray storage and a convenient storage shelf at the top of the cart. Load rating is the highest in the industry at 800 lbs. s can be secured on the tool cart with LocHooks with - and 4-point contact locking features Tool Cart System Height Depth Load Rating 9-1/ 6-/4 1-1/4 800 19596² 1 Includes 60 piece Stainless Steel LocHook assortment and LocBins Height Depth Load Rating 9-1/ 6-/4 1-1/4 800 19595² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI17
NEW s HERC-ALLOY 1000 (Grade 100) Chain Approved for overhead lifting 5% higher working load limit when compared to Grade 80 Meets or exceeds many national and international standards 100% proof tested Chain Chain Dia. Inside Link Inside Link 7/ 800,700 0.18 0.676 0.1 149666² 1 5 4,00 0.81 0.88 0.95 149667 1 9/ 10 4,00 0.81 0.88 0.95 149668 1 5 4,00 0.81 0.88 0.95 149669 1 500 4,00 0.81 0.88 0.95 149670¹ 1 5 8,800 0.94 1.47 0.574 149671 1 /8 10 8,800 0.94 1.47 0.574 14967 1 5 8,800 0.94 1.47 0.574 14967 1 500 8,800 0.94 1.47 0.574 149674¹ 1 5 15,000 0.51 1.559 0.74 149675 1 1/ 10 15,000 0.51 1.559 0.74 149676 1 5 15,000 0.51 1.559 0.74 149677 1 00 15,000 0.51 1.559 0.74 149678¹ 1 5/8 00,600 0.60 1.916 0.855 149679¹ 1 /4 100 5,00 0.787.97 1.070 149680¹ 1 1 Usually ships in to 4 days Temperature F C Reduction of While at Temperature After Exposure to Temperature <400 <04 None None 400 04 15% None 500 0 5% 5% 600 16 0% 15% 700 71 40% 0% 800 47 50% 5% 900 48 60% 0% 1,000 58 70% 5% HERC-ALLOY 800 (Grade 80) Chain Approved for overhead lifting Meets or exceeds many national and international standards Certification included with every drum 100% proof tested Chain Chain Dia. Inside Link Inside Link 7/ 800,100 0.18 0.676 0.1 149654² 1 5,500 0.81 0.88 0.95 149655 1 10,500 0.81 0.88 0.95 89916 1 9/ 5,500 0.81 0.88 0.95 88914 1 10,500 0.81 0.88 0.95 497² 1 500,500 0.81 0.88 0.95 149656¹ 1 5 7,100 0.94 1.47 0.574 149657 1 10 7,100 0.94 1.47 0.574 89917 1 /8 5 7,100 0.94 1.47 0.574 88915 1 64 7,100 0.94 1.47 0.574 498² 1 500 7,100 0.94 1.47 0.574 149658¹ 1 5 1,000 0.51 1.440 0.74 149659 1 10 1,000 0.51 1.440 0.74 89918 1 1/ 5 1,000 0.51 1.440 0.74 88916 1 40 1,000 0.51 1.440 0.74 499² 1 00 1,000 0.51 1.440 0.74 149660¹ 1 5/8 00 18,100 0.60 1.777 0.855 149661¹ 1 /4 100 8,00 0.787.4 1.070 14966¹ 1 7/8 100 4,00 0.875.50 1.17 14966¹ 1 1 100 47,700 1.000.070 1.490 149664² 1 1-1/4 90 7,00 1.50.90 1.740 149665¹ 1 1 Usually ships in to 4 days Temperature F C Reduction of While at Temperature After Exposure to Temperature <400 <04 None None 400 04 10% None 500 0 15% None 600 16 0% 5% 700 71 0% 10% 800 47 40% 15% 900 48 50% 0% 1,000 58 60% 5% NI18 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Hammerlok Coupling Links Attaches chain to master link and hooks Quench and tempered alloy steel 100% proof tested Grade 100 Chain Working Load Limit A B C D E F 7/,700 0.9 0.8 1.85 0.69 0.61 1.44 149681 1 9/ 4,00 0.65 0.45.75 0.71 0.541 1.69 14968 1 /8 8,800 0.50 0.591.00 1.16 0.910.50 14968 1 1/ 15,000 0.678 0.780.80 1.4 1.097.19 149684 1 5/8,600 0.804 0.905 4.54 1.74 1.17.88 149685 1 /4 5,00 0.97 1.071 5.6.09 1.516 4.69 149686 1 Grade 80 Chain Working Load Limit A B C D 7/8 4,00 1.05 5.1.00.5 149687 1 1 47,700 1.5 5.75.5.08 149688¹ 1 1-1/4 7,00 1.5 6.81.6.9 149689³ 1 1 Usually ships in to 4 days Usually ships in 1 to weeks C A B D Sling Identification Tags Stamped Description Without Ring 9884 1 With " Key Ring 149814 1 Forged 149815 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI19
NEW s Master Links Grade 100 Designed to accept HERC-ALLOY 1000 chain and components Durable orange powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested C A B Trade Working Load Limit A B C Chain : Single Chain : Double Chain : Triple Chain : Quad 1/ 5,400 0.406.000 1.500 7/ 7/ 149690 1 1/ 8,600 0.56 5.000.500 9/ 9/ 7/ 7/ 149691 1 /4 17,600 0.750 5.500.750 /8 /8 9/ 9/ 14969 1 1 0,000 1.000 7.000.500 1/ or 5/8 1/ /8 /8 14969 1 1-1/4 45,00 1.50 8.750 4.75 /4 5/8 1/ 1/ 149694 1 1-1/ 70,600 1.500 10.500 5.50 /4 5/8 5/8 149695¹ 1 1-/4 105,900 1.750 1.000 6.000 /4 /4 149696¹ 1 1 Usually ships in to 4 days Grade 80 Designed to accept HERC-ALLOY 800 chain and components Durable orange powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested Trade A B C Chain : Single Chain : Double 1-/4 7,500 1.750 1.00 6.000 1 7/8 149697¹ 1 88,900.000 14.00 7.000 1-1/4 1 149698³ 1-1/4 15,00.50 16.00 8.000 1-1/4 149699³ 1 1 Usually ships in to 4 days Usually ships in 1 to weeks C A B Lifting Angles and s Angle From the Horizontal Usable Percent of 90 100% 70 96% 60 86% 55 81% 50 76% 45 70% 40 64% 5 57% 0 50% NI0 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Sub-Assemblies Grade 100 Designed for Triple and Quad branch HERC-ALLOY 1000 chain slings Consists of an Oblong Master Link and two welded Master Coupling Links Durable orange powder coated finish May be used for mechanical or welded sling assemblies 100% proof tested stated at 60. F C A B D E Trade Working Load Limit A B C D E F Chain : Triple Chain : Quad 1/ 7,000 0.56.000 1.500 0.47 1.06 1.750 7/ 7/ 149700 1 /4 11,00 0.750 5.500.750 0.468 0.875 1.56 9/ 9/ 149701 1 1,900 1.000 7.000.500 0.781 1.500.65 /8 /8 14970 1 1-1/4 9,000 1.50 8.750 4.75 0.906 1.750.15 1/ 1/ 14970 1 1-1/ 58,700 1.500 10.500 5.50 1.15.50 4.000 5/8 5/8 149704¹ 1 1-/4 91,700 1.750 1.000 6.000 1.500.750 5.50 /4 /4 149705¹ 1 1 Usually ships in to 4 days C A Grade 80 Designed for Triple and Quad branch HERC-ALLOY 800 slings Consists of an Oblong Master link and two Master Coupling links Durable orange powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested stated at 60. E F B D Trade Working Load Limit A B C D E F Chain : Triple Chain : Quad 10,600.000 14.000 7.000 1.500 5.50.750 7/8 7/8 149706³ 1-1/4 144,600.50 16.000 8.000 1.750 6.000.000 1 1 149707³ 1 -/4 16,900.750 16.000 9.000.000 7.000.500 1-1/4 1-1/4 149708³ 1 Usually ships in 1 to weeks USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI1
NEW s Clevlok Sling Hooks with Latch Grade 100 Fraction and metric markings Fatigue rated to Grade 100 specifications Fits Grade 80 and Grade 100 chain I beam body 100% proof tested Durable orange powder coated finish Improved forged latch CE compliant hooks and latches Meets EN 1677 Chain Working Load Limit D G H I L M O P R Replacement Latch Kit 7/,700.05 5.00 0.1 0.66 0.8 0.6 1.1 0.94.45 14977² 1 9/ 4,00.5 5. 0.8 0.75 0.6 0.8 1.00 1.11.44 14974 14978 1 /8 8,800 4.8 6.5 0.47 0.97 0.51 1.06 1.16 1.6 4. 148744 14979 1 1/ 15,000 5.48 8.0 0.58 1.18 0.6 1.8 1.50 1.61 5.5 149745 149740 1 5/8,600 6.0 8.4 0.71 1.44 0.75 1.69 1.74 1.9 6.1 149746 149741 1 /4 5,00 7.09 10.80 0.88 1.81 0.94.09.00.08 7.5 149747 14974¹ 1 1 Usually ships in to 4 days Clevlok Cradle Grab Hooks Grade 100 Fits Grade 80 and Grade 100 chain Fraction and metric markings I beam body with chain cradle saddle 100% proof tested Chain Working Load Limit D G H Fatigue rated to Grade 100 specifications Durable orange powder coated finish J K L M P R 9/ 4,00.18.8 0.8 0.80 0.95 0.6 0.8 0.8 1.86 8895 1 /8 8,800.7 4. 0.47 1.16 1.7 0.51 0.47 1.0.47 8896 1 1/ 15,000. 5.7 0.65 1.4 1.54 0.6 0.65 1.18.05 8897 1 5/8,600 4.18 6.54 0.79 1.5 1.9 0.75 0.79 1.41.75 149768 1 Usually ships in 1 to weeks R P L D H M G J K NI USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Eye Sling Hooks with Latch Grade 100 Fraction and metric markings Durable orange powder coated finish 100% proof tested Fatigue rated to Grade 100 specifications S M P L O D I H E N B K G Chain Working Load Limit Dim. B Dim. D Dim. E Dim. G Dim. H Dim. I Dim. K Dim. L Dim. M Dim. N Dim. O Dim. P Dim. S Rep. Latch Kit 7/,700 1.50.04 1.0 5.06 0.8 0.66 1.47 0.75.75 0.97 0.99 0.94 0.99 14977 1 9/ 4,00 1.6.50 1.50 5.5 0.44 0.7 1.59 0.75.75 1.19 1.0 1.05 1.06 901 85549 1 /8 8,800.06 4. 1.88 6.64 0.56 0.95.19 0.94 4.78 1.44 1.45 1.8 1.1 9014 85550 1 1/ 15,000.6 5.50.5 8.16 0.75 1.17.56 1.1 5.69 1.78 1.94 1.66 1.6 9015 85551 1 5/8,600.06 6.4.6 9.66 0.88 1.44.6 1.1 6.50.0.8.19 1.75 9016 8555 1 /4 5,00.50 7.8.00 11.8 1.00 1.69.44 1.50 7.81.50.8.51.19 14976 14978¹ 1 Usually ships in to 4 days Grade 80 Quench and tempered alloy steel 100% proof tested Fatigue rated Durable orange powder coated finish S M P L O D I H E N B K G Chain Working Load Limit Dim. B Dim. D Dim. E Dim. G Dim. H Dim. I Dim. K Dim. L Dim. M Dim. N Dim. O Dim. P Dim. S 7/8 4,00.88 8.59.8 1.7 1.09 1.94.88 1.69 8.75.78..84.8 14979¹ 1 1 47,700 4.1 9.59 4.00 14. 1..14 4.5 1.88 9.88.1.55.09.88 14970¹ 1 1-1/4 7,00 5.1 11.56 4.66 17.00 1.50.6 4.64.1 11.50.88 4.5.89.41 14971¹ 1 1 Usually ships in to 4 days Latchlok Hook Reference Chart Attachment Type WLL 4:1 (Lbs.) WLL 5:1 (Lbs.) Hook : 9/" Maximum : 4,00 Lbs. Grade 80 9/",500,800 Grade 100 9/" 4,00,440 Round Sling (Vertical) Purple,50,600 Wire Rope (EIP) /8",775,00 Hook : /8" Maximum : 8,800 Lbs. Grade 80 /8" 7,100 5,680 Grade 100 /8" 8,800 7,040 Round Sling (Vertical) Green 6,65 5,00 Wire Rope (EIP) 9/16" 8,400 6,70 Attachment Type WLL 4:1 (Lbs.) WLL 5:1 (Lbs.) Hook : 1/" Maximum : 15,000 Lbs. Grade 80 1/" 1,000 9,600 Grade 100 1/" 15,000 1,000 Round Sling (Vertical) Yellow 10,500 8,400 Round Sling (Vertical) Tan 1,50 10,600 Wire Rope (EIP) /4" 14,700 11,760 Hook : 5/8" Maximum :,600 Lbs. Grade 80 5/8" 18,000 14,400 Grade 100 5/8",600 18,080 Round Sling (Vertical) Red 16,500 1,00 Round Sling (Vertical) White 1,000 16,800 Wire Rope (EIP) 7/8" 19,900 15,90 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI
NEW s Latchlok Hooks Grade 100 Do not apply load unless latch and hook are completely closed and locked Make certain that the latch does not support any part of the load When lifting, make certain that the load is firmly seated in the base (bowl) of the hook Inspect hook and latch periodically. If the hook or latch is damaged or if the latch fails to interlock with the tip, the hook should be removed from service Do not exceed the working load limit Do not use if the hook is visibly distorted, damaged or worn Clevlok Style High cycling, long life spring I beam construction for greater strength Chain Working Load Limit D F G H J Keep body and other objects clear of the latch when closing to avoid the pinch point Do not side load or tip load hook 100% proof tested Fatigue rated to Grade 100 specifications Durable orange powder coated finish K L M P 9/ 4,00.77 1.64 5.74 0.5 1.00 0.91 0.6 5.05 0.88 149760 1 /8 8,800 4.76.7 6.9 0.47 1.16 1.14 0.51 6.08 1.07 149761 1 1/ 15,000 6.6.91 8.96 0.59 1.50 1.46 0.6 7.88 1.58 14976 1 5/8,600 7.7.0 10. 0.71 1.74 1.81 0.75 8.96 1.97 14976³ 1 Usually ships in 1 to weeks L Pin ø M Reach P H D F G J K A H M (Reach) F Eye Style Large eye design for use with chain, wire rope and synthetic material P D K Chain A D F H K M P 9/ 4,00 1.09.77 1.64 0.44 0.91 5.7 0.88 149764 1 /8 8,800 1.6 4.76.7 0.59 1.14 6.65 1.07 149765 1 1/ 15,000 1.57 6.6.91 0.79 1.46 8.79 1.58 149766 1 5/8,600.00 7.7.0 1.0 1.81 10.6 1.97 149767³ 1 Usually ships in 1 to weeks A H B M (Reach) F Bushing Swivel Style The eye easily positions to attach to the load P D K Chain A B D F H M P 9/ 4,00 1.50 1..77 1.64 0.6 7.17 0.88 149756 1 /8 8,800 1.75 1.6 4.76.7 0.77 8.7 1.07 149757 1 1/ 15,000.00 1.76 6.6.91 0.9 11.18 1.58 149758 1 5/8,600.75.8 7.7.0 1.00 1.41 1.97 149759³ 1 Usually ships in 1 to weeks NI4 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Weld-On Lifting Hooks Heavy steel construction with a durable finish Designed for use with excavating equipment can be welded directly onto the bucket Latch prevents accidental unhooking A B C E F G,05 4.6 4.1.78 1.00 1.5 0.84 149748 1 6,615 5.81 4.7.74 1.5 1.0 0.98 149749 1 11,05 7.97 6.45 5.1 1.16 1.7 1.79 149750 1 17,500 7.61 5.4 6.69 1.58 1.97 1.85 149751 1 Grade 70 Transport (Binding) Chain Meets ASTM and NACM standards Meets FMCSA and CVSA requirements Heat treated for superior wear and toughness 100% proof tested Permanent identification on chain Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Chain Dia. Inside Link Inside Link 10,150 0.81 0.840 0.470 500² 1 1/4 400,150 0.81 0.840 0.470 149846² 1 800,150 0.81 0.840 0.470 149847² 1 90 4,700 0.7 0.980 0.460 501*² 1 90 4,700 0.7 1.100 0.500 149848² 1 5/16 75 4,700 0.7 0.980 0.460 149849*² 1 75 4,700 0.7 1.100 0.500 149850² 1 550 4,700 0.7 0.980 0.460 149851*¹ 1 550 4,700 0.7 1.100 0.500 14985¹ 1 60 6,600 0.94 1.140 0.540 50*² 1 60 6,600 0.94 1.75 0.600 14985² 1 /8 00 6,600 0.94 1.140 0.540 149854*² 1 00 6,600 0.94 1.75 0.600 149855² 1 400 6,600 0.94 1.140 0.540 149856*¹ 1 400 6,600 0.94 1.75 0.600 149857¹ 1 1/ 100 11,00 0.51 1.559 0.74 149858² 1 00 11,00 0.51 1.559 0.74 149859² 1 *Short Link design 1 Usually ships in to 4 days Assemblies Meets FMCSA, CVSA, DOT requirements Clevis Grab Hooks attached on each end Short Link design Chain 1/4 0,150 88911 1 5/16 0 4,700 8891 1 /8 0 6,600 8891 1 1/ 0 11,00 149860 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI5
NEW s Grade 70 Transport (Binding) Chain Attachments Clevis Slip Hooks, Grade 70 Meets ASTM and NACM standards Designed specifically for Grade 70 Transport Chain Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain *Grade 6 D H L P R P R W 1/4,750.6 0.94.69 0.4.1 0.1 149867* 1 5/16 4,700.5 1.06 4.6 0.9.91 0.8 149868 1 /8 6,600.87 1.4 5.4 0.49.9 0.45 149869 1 7/16 6,900 4.1 1.56 5.69 0.50.50 0.50 149870* 1 1/ 9,400 4.88 1.75 6.8 0.59.94 0.59 149871* 1 5/8 14,00 5.69.00 7.56 0.75 4.75 0.75 14987* 1 W D H L A Clevis Grab Hooks, Grade 80 Quench and tempered alloy steel Durable orange powder coated finish Meets ASTM and NACM Standards 4:1 design factor Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. D B C Chain A B C D 1/4,500 0.1 0.8 0. 1.88 149861 1 5/16 4,500 0.8 0.44 0.9.8 14986 1 /8 7,100 0.45 0.50 0.50.6 14986 1 7/16 6,900 0.50 0.56 0.50.00 149864* 1 1/ 1,000 0.59 0.66 0.59.1 149865 1 5/8 18,100 0.75 0.78 0.75.94 149866 1 *Grade 6 Minimum Number of Chains Required to Secure Loads in Forward Direction by Weight of the Article in Lbs. Chain Grade 0 4 70 80 100 (Lbs.) 5,000 10,000 15,000 0,000 5,000 0,000 5,000 40,000 45,000 50,000 5/16 1,900 5 7 9 11 1 15 17 19 /8,650 4 5 7 8 10 11 1 14 16 5/16,900 4 5 6 7 8 9 10 11 /8 5,400 1 4 5 6 6 7 8 1/4,150 4 6 7 8 9 11 1 1 5/16 4,700 1 4 5 6 6 7 8 9 /8 6,600 1 4 4 5 5 6 7 7/,100 4 6 8 10 1 14 16 18 0 9/,500 4 5 6 7 9 10 11 1 5/16 4,500 1 4 5 6 7 8 9 10 /8 7,100 1 4 4 5 6 6 7/,700 5 6 8 9 11 1 14 15 9/ 4,00 1 4 5 6 7 8 9 10 /8 8,800 1 1 4 4 5 5 This chart indicates the minimum number of chains required to secure loads in the forward direction (0.8g deceleration)* per federal Motor Carriers Safety Administration, DOT Regulations; per 49CFR, Part 9 Paragraph 9.10 *Refer to 49CFR, Parts 9 and 9, for North American Standard for Protection Against Falling and Shifting Cargo for complete regulation NI6 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Load Binders Ratchet Type Meets all DOT specifications Each ratchet component is forged from pure alloy steel Handle is designed loose using self-locking one-way bolts allowing easy removal of unwanted debris such as mud, snow or ice Proof tested to 50% of the minimum breaking strength Gears are permanently welded to the barrel Chain : Grade 0 Chain : Grade 4 Chain : Grade 70 Chain : Grade 80 Working Load Limit Take Up Handle 1/4 1/4,600 4.00 11.00 149874 1 /8 /8 /8 /8 7,100 8.00 14.00 14987 1 /8 /8 5/16 5/16 5,400 8.00 14.00 149875 1 1/ 1/ /8 /8 9,00 8 14 9866 1 Load Binders QuikBinder PLUS Ratchet Load Binder The QuikBinder PLUS is easier to install than standard ratchet load binders. The -position pawl offers the user a choice of ratchet extension, ratchet takeup or a free spin setting for fast adjustment in either direction. A load can be secured in half the time. Folding handle for more compact storage Tamper resistant use a long shank padlock to secure load chain to binder assembly Meets DOT, CVSA, and CCMTA requirements Chain : Grade 70 Chain : Grade 80 Working Load Limit Take Up 5/16 /8 7,100 6 144841 1 /8 1/ 1,000 6 14484 1 1/ 5/8 18,100 6 14484 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI7
NEW s Grade 4 High Test Chain Grade 4 Chain features both high tensile strength and resistance to wear needed by modern hauling and heavy duty trucking, farm and construction firms. s exceed those of ordinary low carbon or general utility chain. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Chain Dia. Inside Link Inside Link 150,600 0.76 1.4 0.8 144798 1 1/4 400 1,00 0.74 1.6 0.48 144800³ 1 800,600 0.74 1.6 0.48 144805³ 1 100,900 0.4 1.9 0.44 144808 1 5/16 75 1,900 0.8 1.85 0.48 144810³ 1 550,900 0.8 1.85 0.48 144815³ 1 75 5,400 0.406 1.8 0.55 144818 1 /8 00,650 0.9 1.74 0.551 1448³ 1 400 5,400 0.9 1.74 0.551 14487³ 1 Usually ships in 1 to weeks Grade 0 Proof Coil Chain A general utility chain for farm and industrial applications such as: log chain, cargo lashing, pipeline hanging, tailgate, guard rail, tow and switch chain. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Chain Dia. Inside Link Inside Link 50 800 0.17 0.95 0.405 144749 1 /16 400 800 0.17 0.95 0.405 14475³ 1 800 800 0.17 0.95 0.405 144755³ 1 141 1,00 0.74 1.6 0.48 144757 1 1/4 400 1,00 0.74 1.6 0.48 144760³ 1 800 1,00 0.74 1.6 0.48 14476³ 1 9 1,900 0.8 1.85 0.48 144765 1 5/16 75 1,900 0.8 1.85 0.48 144768³ 1 550 1,900 0.8 1.85 0.48 144771³ 1 6,650 0.9 1.74 0.551 14477 1 /8 00,650 0.9 1.74 0.551 144776³ 1 400,650 0.9 1.74 0.551 144779³ 1 1/ 5 4,500 0.509 1.78 0.75 144781³ 1 Usually ships in 1 to weeks NI8 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Grade 4 High Test and Grade 0 Proof Coil Chain Attachments Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Clevis Slip Hook with Latch Chain Working Load Limit A B C D 1/4,600 0.440 0.790 0.80.560 14485 1 5/16,900 0.500 0.90 0.440.870 144854 1 /8 5,400 0.590 1.140 0.470.50 144855 1 1/ 9,00 0.750 1.40 0.60 4.000 144856 1 Clevis Slip Hook Chain Working Load Limit A B C D 1/4,600 0.440 0.940 0.70.560 144857 1 5/16,900 0.500 1.060 0.440.870 144858 1 /8 5,400 0.590 1.10 0.470.50 144859 1 Eye Slip Hook with Latch Chain Working Load Limit A B C D 1/4,600 0.500.560 0.750 0.790 14487³ 10 5/16,900 0.60.950 0.880 0.790 144874³ 10 /8 5,400 0.70.60 1.100 1.00 144875³ 10 Usually ships in 1 to weeks Eye Slip Hook Chain A B C 1/4,600 0.500.560 0.940 144869 1 5/16,900 0.60.950 1.060 144870 1 /8 5,400 0.70.60 1.10 144871 1 Clevis Grab Hook Chain Working Load Limit A B C D 1/4,600 0.60 0.400 0.80 1.970 144845 1 5/16,900 0.400 0.440 0.440.60 144847 1 /8 5,400 0.480 0.500 0.470.60 144849 1 1/ 9,00 0.750 0.660 0.60.190 144851 1 Eye Grab Hook Chain A B C 1/4,600 0.500 1.970 0.40 14486 1 5/16,900 0.560.50 0.440 144864 1 /8 5,400 0.660.560 0.500 144866 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI9
NEW s Grade 50 Lifting Chain Stainless Steel Approved for overhead lifting Chain Chain Dia. Inside Link Inside Link /16 1,100 0.19 0.58 0.5 1474² 1 Ft. 9/,00 0.8 0.85 0.8 1474² 1 Ft. 5/16,700 0. 0.95 0.45 14744² 1 Ft. /8 4,400 0.9 1.18 0.55 14745² 1 Ft. 1/ 7,00 0.51 1.55 0.75 14746² 1 Ft. Sold by the foot Temperature F C Reduction of While at Temperature After Exposure to Temperature <400 <04 None None 400 04 10% None 800 46 0% None 1,000 57 0% None 1,00 649 40% None 1,00 704 50% None 1,400 760 60% None 1,500 815 75% None Stainless Steel Coupling Links Chain /16 1,100 147811² 1 1/4,00 14781² 1 5/16,700 14781² 1 /8 4,400 147814² 1 1/ 7,00 147815² 1 5/8 11,000 147816² 1 Stainless Steel Sling Identification Tag 1.5 *Tag is blank Thickness.5 0.09 147817² 1.5 0.09 147818*² 1 Master Links Stainless Steel Trade Working Load Limit A B C Chain : Single Chain : Double /8 1,500 0.75.000 1.500 /16 /16 14780² 1 1/,000 0.500 5.000.500 1/4 1/4 14781² 1 5/8,800 0.65 6.000.000 5/16 5/16 1478² 1 /4,750 0.750 6.500.50 /8 /8 1478² 1 1 8,000 1.000 7.000.500 1/ 1/ 14784² 1 1-1/4 11,800 1.50 8.750 4.80 14785² 1 C A B A C Sub-Assemblies Stainless Steel Trade A B C D F Chain : Triple F Chain : Quad 1/,000 0.500 5.000.500 0.75.000 /16 /16 14786² 1 5/8,800 0.65 6.000.000 0.500 5.000 1/4 1/4 14787² 1 /4,750 0.750 6.500.50 0.65 6.000 5/16 5/16 14788² 1 1 8,000 1.000 7.000.500 0.750 5.500 /8 /8 14789² 1 1-1/4 11,800 1.15 8.750 4.80 1.000 7.000 1/ 1/ 14780² 1 E B D NI0 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Industrial Chain Stainless Steel Sold by the foot Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Chain Dia. Inside Link Inside Link 5/ 500 0.16 0.77 0.8 14741² 1 Ft. /16 1,00 0. 0.95 0.8 1474² 1 Ft. 1/4 1,570 0.5 1 0.4 1474² 1 Ft. 5/16,400 0. 0.94 0.46 14744² 1 Ft. /8,550 0.9 1. 0.57 14745² 1 Ft. Stainless Steel Hooks Clevis Slip Hooks with Latch Chain A B C D 1/4 1,000 0.41 0.58 0.7.57 147579² 1 5/16 1,500 0.40 0.8 0.6.7 147580² 1 /8,000 0.4 0.95 0.47.04 147581² 1 1/,000 0.50 1.05 0.54.5 14758² 1 Clevis Grab Hooks Chain A B C D 1/4 1,500 0.41 0.4 0.7 1.8 147575² 1 5/16,000 0.6 0.40 0.6.08 147576² 1 /8,500 0.4 0.48 0.47.55 147577² 1 1/,600 0.50 0.60 0.54.85 147578² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI1
NEW s Anchor Shackles Carbon steel bodies Alloy steel pins and traceability codes shown as permanent marking on body and pin Screw Pin All shackles meet or exceed Federal Specification RRC-71F, Type IVA, Grade A, Class Design factor 6:1 Pin Dia. Finish /16 1/4 1,000 Galvanized 149876 1/4 5/16 1,500 Orange Powder Coated 149877 5/16 /8,000 Orange Powder Coated 149879 /8 7/16,000 Orange Powder Coated 149881 7/16 1/ 4,000 Orange Powder Coated 14988 1/ 5/8 6,000 Orange Powder Coated 149885 5/8 /4 9,000 Orange Powder Coated 149887 /4 7/8 1,000 Orange Powder Coated 1449 7/8 1 17,000 Orange Powder Coated 1449 1 1 1-1/8 0,000 Orange Powder Coated 14494 1 1-1/8 1-1/4 4,000 Orange Powder Coated 14495 1 1-1/4 1-/8 8,000 Orange Powder Coated 14496 1 1-/8 1-1/ 4,000 Orange Powder Coated 14989 1 1-1/ 1-5/8 40,000 Orange Powder Coated 14497 1 1-5/8 1-/4 48,000 Orange Powder Coated 149895³ 1 1-/4 60,000 Orange Powder Coated 149896³ 1-1/4 70,000 Orange Powder Coated 149897³ 1 Usually ships in 1 to weeks Pin Dia. Anchor Shackles Screw Pin Screw Pin Anchor Shackles are ideal for those applications where frequent pin removal is needed. Hot-dipped galvanized to ASTM A15 Proof load at times Ultimate load at 6 times the Meets Federal Specification RR-C-71F, Type IVA, Grade A, Class Pin Dia. Finish /16 1/4 667 Galvanized 144877 1/4 5/16 1,000 Galvanized 144878 5/16 /8 1,500 Galvanized 144879 /8 7/16,000 Galvanized 144880 7/16 1/,000 Galvanized 144881 1/ 5/8 4,000 Galvanized 14488 5/8 /4 6,500 Galvanized 14488 /4 7/8 9,500 Galvanized 144884 7/8 1 1,000 Galvanized 144885 1 1 1-1/8 17,000 Galvanized 144886 1 1-1/8 1-1/4 19,000 Galvanized 144887 1 1-1/4 1-/8 4,000 Galvanized 144888 1 1-/8 1-1/ 7,000 Galvanized 144889³ 5 1-1/ 1-5/8 4,000 Galvanized 144890³ 5 1-/4 50,000 Galvanized 144891³ 1-1/4 70,000 Galvanized 14489³ 1 Usually ships in 1 to weeks NI USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Anchor Shackles Round Pin Carbon steel bodies Alloy steel pins and traceability codes shown as permanent marking on body and pin All shackles meet or exceed Federal Specification RRC-71F, Type IVA, Grade A, Class 1 Design factor 5:1 Pin Dia. Finish /16 1/4 1,000 Galvanized 149898 1/4 5/16 1,500 Galvanized 149899 5/16 /8,000 Galvanized 149900 /8 7/16,000 Galvanized 149901 7/16 1/ 4,000 Galvanized 14990 1/ 5/8 6,000 Orange Powder Coated 14990 5/8 /4 9,000 Orange Powder Coated 149904 /4 7/8 1,000 Orange Powder Coated 1450 7/8 1 17,000 Orange Powder Coated 149905 1 1 1-1/8 0,000 Orange Powder Coated 149906 1 1-1/8 1-1/4 4,000 Orange Powder Coated 149907 1 1-1/4 1-/8 8,000 Orange Powder Coated 149908 1 1-/8 1-1/ 4,000 Orange Powder Coated 149909 1 1-1/ 1-5/8 40,000 Orange Powder Coated 149910 1 1-5/8 1-/4 48,000 Orange Powder Coated 149911³ 1 1-/4 60,000 Orange Powder Coated 14991³ 1-1/4 70,000 Orange Powder Coated 14991³ 1 Usually ships in 1 to weeks Pin Dia. Bolt, Nut and Cotter Carbon steel bodies Alloy steel pins and traceability codes shown as permanent marking on body and pin All shackles meet or exceed Federal Specification RRC-71F, Type IVA, Grade A, Class Design factor 6:1 Pin Dia. Finish 1/4 5/16 1,500 Galvanized 149914 5/16 /8,000 Galvanized 149915 /8 7/16,000 Galvanized 149916 7/16 1/ 4,000 Galvanized 149917 1/ 5/8 6,000 Galvanized 149918 5/8 /4 9,000 Galvanized 149919 /4 7/8 1,000 Galvanized 14990 7/8 1 17,000 Galvanized 14991 1 1 1-1/8 0,000 Galvanized 1499 1 1-1/8 1-1/4 4,000 Galvanized 1499 1 1-1/4 1-/8 8,000 Galvanized 14994 1 1-/8 1-1/ 4,000 Galvanized 14995 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI
NEW s Anchor Shackles Stainless Steel 16 Stainless Steel Screw Pin Meets Federal Specification RR-C-71F, Type IVA, Class Pin Dia. /16 1/4 650 14706² 1/4 5/16 1,000 14707² 5/16 /8 1,00 14708² /8 7/16 1,500 14709² 7/16 1/,000 14710² 1/ 5/8,000 14711² 5/8 /4 4,000 1471² /4 7/8 6,000 1471² 7/8 1 8,000 14714² 1 1 1-1/8 10,000 14715² 1 1-1/4 1-/8 14,000 14716² 1 Round Pin Meets Federal Specification RR-C-71F, Type IVA, Class 1 Pin Dia. 1/4 5/16 1,000 1475² 5/16 /8 1,00 1475² /8 7/16 1,500 14754² 7/16 1/,000 14755² 1/ 5/8,000 14756² 5/8 /4 4,000 14757² /4 7/8 6,000 14758² 7/8 1 8,000 14759² 1 1 1-1/8 10,000 14760² 1 1-1/4 1-/8 14,000 14761² 1 Bolt, Nut and Cotter Meets Federal Specification RR-C-71F, Type IVA, Class Pin Dia. 1/4 5/16 1,000 1477² 5/16 /8 1,00 1477² /8 7/16 1,500 14774² 7/16 1/,000 14775² 1/ 5/8,000 14776² 5/8 /4 4,000 14777² /4 7/8 6,000 14778² 7/8 1 8,000 14779² 1 1 1-1/8 10,000 14780² 1 1-1/4 1-/8 14,000 14781² 1 NI4 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Long Reach Shackles Alloy steel Load rated forged on body Meets the requirements of ASME B0.6 Design factor of 5:1 Screw Pin Pin Dia. Finish 5/8 /4 7,000 Orange Powder Coated 14997 1 /4 7/8 10,000 Orange Powder Coated 14999 1 1 1 19,000 Orange Powder Coated 14991 1 1-1/4 1-/8 8,000 Orange Powder Coated 1499 1 1-1/ 1-5/8 4,000 Orange Powder Coated 14995 1 1-/4 50,000 Orange Powder Coated 14997¹ 1 1 Usually ships in to 4 days Bolt, Nut and Cotter Pin Dia. Finish 5/8 /4 7,000 Self Colored 14998³ /4 7/8 10,000 Self Colored 14999³ 1 1 19,000 Self Colored 149940³ 1-1/4 1-/8 8,000 Self Colored 149941³ 1-1/ 1-5/8 4,000 Self Colored 14994³ 1 1-/4 50,000 Self Colored 14994³ 1 Usually ships in 1 to weeks USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI5
NEW s Connecting Links For temporary chain repair and coupling of attachments Use one size larger than chain size Carbon Steel Chain Inside Inside 1/4 1,00 1.000 0.500 144951 5/16 1,900 1.06 0.56 14495 /8,650 1.1 0.65 144955 1/ 4,500 1.65 0.750 144957 5 Stainless Steel Forged Chain Working Load Limit Inside Inside 1/4 1,400 0.87 0.4 147808² 1 5/16,000 1.00 0.50 147809² 1 /8,800 1.1 0.57 147810² 1 Stainless Steel Cast Chain Working Load Limit Inside Inside /16 400 0.70 0.5 147799² 1 1/4 600 0.84 0.4 147800² 1 5/16 1,000 0.95 0.48 147801² 1 /8 1,500 1.15 0.60 14780² 1 1/,000 1.45 0.75 14780² 1 5/8 4,000 1.90 0.95 147804² 1 Lap Links For temporary chain repair and coupling of attachments Use one size larger than chain size Carbon Steel Chain Working Load Limit Inside Inside /16 40 1.000 0.505 14495 10 400 1.15 0.51 14497 10 1/4 400.000 0.680 14499 10 5/16 950 1.510 0.70 144941 10 1,50 1.650 0.785 14494 10 /8 1,50.15 0.840 144945 10 Stainless Steel Chain Working Load Limit Inside Inside /16 00 0.95 0.58 147805² 5 1/4 400 1.5 0.6 147806² 5 5/16 700 1.50 0.70 147807² 5 NI6 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Quick Links Stainless Steel Fast, easy connections for chain and attachments Inside Inside Opening Working Load Limit 1/8 1.15 0.4 0.18 00 147745² /16 1.56 0.5 0.8 800 147747² 1/4 1.86 0.58 0. 1,00 147748² 5/16.9 0.70 0.44,000 147750² /8.78 0.78 0.5,500 14775² 1/. 1.00 0.5 5,000 14775² Turnbuckles Stainless Steel Eye and Eye Jaw and Jaw Meets Federal Specification F1145-9, Type 1, Class D Dia. Take Up 1/4 4.00 500 147461² 1 5/16 4.50 800 14746² 1 /8 6.00 1,00 14746² 1 1/ 6.00,00 147464² 1 Meets Federal Specification F1145-9, Type 1, Class G Dia. Take Up 1/4 4.00 500 147470² 1 5/16 4.50 800 147471² 1 /8 6.00 1,00 14747² 1 1/ 6.00,00 14747² 1 Snaps Stainless Steel Double Bolt Snaps Snap 0..50 14767² 0.4 4.00 147674² 0.47 4.75 147675² Stainless Steel Swivel Bolt Snaps Eye Snap /8 0..7 147668² 1/ 0.6.16 147669² 5/8 0.4.44 147670² /4 0.4.60 147671² 1-1/4 0.48 4.6 14767² USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI7
Snaps Brass Finish Type Style Code Usually ships in 1 to weeks Eye Double End P /8-1/ 144974 10 Swivel Eye J /4-1/8 144971 10 Bolt Snap Swivel Eye J 1-1/ 14497³ 10 Swivel Eye J 1-1/8 4-5/8 14497³ 10 Swivel Strap Eye A 1/ 144975³ 0 Fixed Eye I /8 144976 10 Quick Snap Fixed Eye I 5/8-7/16 144977³ 10 Swivel Eye B 9/16-1/4 144968³ 0 Swivel Eye B 5/8-5/8 144969³ 10 Trigger Snap Swivel Eye F 1-1/8 -/4 144970 10 A C E NEW s B D F Nickel Finish Type Style Code Usually ships in 1 to weeks Eye Double End P 1/4-1/ 144989 10 Double End P 5/8 4-5/8 144990³ 0 Fixed Eye R 5/8-5/16 144991³ 10 Fixed Strap Eye K 1-1/4 14499³ 10 Bolt Snap Key Ring Swivel Eye L 1 -/4 144987³ 10 Open End N 1/ -1/ 144988 10 Swivel Eye J /4 -/16 144984³ 10 Swivel Eye J 7/8 -/16 144985³ 0 Swivel Eye J 1 4 144986³ 0 Swivel Strap Eye A 5/8 -/4 14499³ 40 Bull Snap Swivel Eye D 7/8 4 144979³ 10 Cap Snap Swivel Eye H /4 -/8 14498³ 0 Swivel Eye H 1-5/8 14498³ 10 Quick Snap Swivel Eye B /4-1/4 144978³ 40 Safety Snap Fixed Eye O /4-1/ 144999 10 Snap Open End G 1/4-7/8 144997 10 Key Ring Swivel E 7/8 4-1/ 144996³ 10 Spring Snap Swivel Eye C 1/ -1/ 144994³ 10 Open End M /8-1/ 144998 10 Swivel Eye C /4-7/8 144995³ 50 Trigger Snap Swivel Eye F /4-9/16 144980³ 40 Swivel Eye F /4-7/8 144981³ 0 G I K M H J L N O P Zinc Finish Type Style Code Bolt Snap Eye Swivel Eye J /8-15/16 145000 10 Swivel Eye J 5/8 4-1/4 145001 10 Q R Anodized Spring Link Code Q 14500 5 NI8 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Spring Links Carbon Steel Working Load Limit /16 100 144960 5 1/4 175 -/8 144961 5 5/16 50-1/8 14496 5 /8 45 4 144965 5 Stainless Steel Working Load Limit /16 10 147609² 1/4 170 -/8 147610² 5/16 80-1/8 14761² /8 400-7/8 14761² S-Hooks Stainless Steel Overall Opening in Hooks Wire Dia. Working Load Limit 1.8 0.9 1/8 50 14769² 10 1.59 0.4 5/ 80 147694² 10 1.9 0.6 /16 10 147695² 10.5 0.41 1/4 00 147696² 10.58 0.46 5/16 50 147697² 10 U-Hooks Stainless Steel Overall Opening in Hooks Wire Dia. Working Load Limit.15 0.4 1/4 00 147698² 10.95 0.65 5/16 400 147699² 10.5 0.75 /8 500 147700² 10 Jack Chain Jack Chain is the lightest and smallest of regular commercial chain formed from wire. It is used in applications where high strength is not required. Carbon Steel Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Stainless Steel Chain Container Type #16 100 Carton 10 145090 1 #14 100 Carton 16 14509 1 #1 100 Carton 9 145095 1 #10 100 Carton 4 145096 1 #8 100 Carton 60 145097 1 #6 100 Carton 88 145098 1 Chain #18 100 5 147448² 1 #16 100 10 147449² 1 #14 100 16 147450² 1 #1 100 9 147451² 1 #10 100 4 14745² 1 Lock Link Chain Passing Link Chain The strongest weldless chain with all links facing in the same direction, making it ideal for pipe suspension and operating overhead doors and steam valves. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type /0 100 Carton 40 14510 1 A welded chain with links sufficiently wide to allow them to pass on another freely, eliminating the tendency to kink. It is used for gates, farm machinery and general utility industry. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type /0 100 Carton 450 145058 1 4/0 100 Carton 600 145059 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI9
NEW s Safety Chain Brass Plumbers Chain Stainless Steel Safety chain is a stamped and formed solid brass chain used for plumbing fixtures, as well as other uses requiring a light flat metal chain. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type 1/0 00 Reel 5 145081 1 1/0 100 Carton 5 14508 1 /0 100 Carton 14508 1 Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain 1/0 100 75 147459² 1 /0 100 50 147460² 1 Sash Chain Sash Chain is a stamped, formed chain slightly stronger than Jack Chain. It is used for operating heater controls on ducts and dampers, as well as window sashes in double hung windows. Carbon Steel Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Stainless Steel Chain Container Type #8 100 Carton 75 145084 1 #5 100 Carton 94 145085 1 #5 100 Carton 106 145086 1 #40 100 Carton 11 145088 1 Chain #5 100 5 147456² 1 #5 100 00 147457² 1 #8 100 150 147458² 1 Straight Link Coil Chain Twist Link Coil Chain Straight Link Coil Chain is a welded chain easily identified by its link design. The link is long and relatively narrow in proportion. It s an excellent choice for tailgates, trailer safety chain and barrier chain. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type #4 100 Carton 05 145004 1 # 100 Carton 10 145007 1 1/0 100 Carton 440 145011 1 /0 100 Carton 50 145015 1 /0 00 Pail 50 145016 1 /0 50 Pail 50 145017 1 4/0 100 Carton 670 14500 1 A modification of straight link coil chain which allows the chain to lay flatter. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type /0 100 Carton 495 14505 1 4/0 100 Carton 65 14506 1 NI40 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Straight Link Machine Chain Straight Link Machine Chain is a welded chain noted for its flexibility. Used for overhead doors, tailgates and agricultural implements. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Chain Container Type #4 100 Carton 15 14507 1 # 100 Carton 5 145041 1 /0 100 Carton 545 145045 1 4/0 100 Carton 700 145046 1 Twist Link Machine Chain A modification of straight link chain which allows the chain to lay flatter. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Carbon Steel Stainless Steel Sold by the foot Chain Container Type #4 100 Carton 05 145049 1 # 100 Carton 10 14505 1 /0 100 Carton 50 145055 1 Chain 5/64 150 14744² 1 Ft. / 190 14744² 1 Ft. 1/8 80 147444² 1 Ft. 9/64 400 147445² 1 Ft. 5/ 550 147446² 1 Ft. 1/8 80 147447² 1 Ft. Twin Loop Chain A weldless chain that combines strength, flexibility, light weight and neat appearance. It is an all-purpose chain for a wide variety of uses including swing sets, animal chains and hammocks. Do not use for overhead lifting. Federal regulations require alloy chain for overhead lifting. Carbon Steel Stainless Steel Chain Container Type #5 100 Carton 55 145060 1 # 100 Carton 90 145064 1 # 100 Carton 115 145067 1 /0 100 Carton 55 14507 1 /0 100 Carton 05 145077 1 4/0 100 Carton 65 145080 1 Chain /0 100 55 14745² 1 #1 100 155 147454² 1 # 100 90 147455² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI41
NEW s Lever Operated Hoists Series 65 The Series 65 Lever Operated Hoist is a high-quality, rugged, steel tool for close quarter pulling, stretching, and hoisting applications. Its characteristic short handle, along with minimal lever pull effort, make this tool ideal for a broad range of applications. Meets ASME B0.1 Manually Lever Operated Hoist Standard and European CE Standard Ideal for construction and industrial applications Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Puller The CM 640 Long Handle Puller features a heavyduty design for pulling, lifting, dragging, and stretching construction and industrial applications. Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Load Capacity (US ton) Lift Pull to Lift Rated Load Lever /4 5 58 1-1/4 14986² 1 10 58 1-1/4 14987² 1 1-1/ 5 89 1-1/4 14988² 1 10 89 1-1/4 14989² 1 Load Capacity (US ton) Lift Pull to Lift Rated Load Lever /4 5 11 149816³ 1 10 11 149817³ 1 1-1/ 5 51 16-1/4 149818³ 1 10 51 16-1/4 149819³ 1 Usually ships in 1 to weeks Bandit The Bandit Lever Operated Hoist s portable design, easy free chaining, and 60 rotating handle make it one of the most versatile hoists. Rugged, yet light weight, design and construction can be easily transported and used in even the most confining spaces 60 rotating handle allows for versatile rigging options when working in tight spaces Load Capacity (US ton) Lift Pull to Lift Rated Load Lever 5 45 9-5/8 14984¹ 1 /4 10 45 9-5/8 14985¹ 1 15 45 9-5/8 14986¹ 1 0 45 9-5/8 14987¹ 1 5 64 10-1/4 14988¹ 1 1-1/ 10 64 10-1/4 14989¹ 1 15 64 10-1/4 14980¹ 1 0 64 10-1/4 14981¹ 1 1 Usually ships in to 4 days HMI-certified Meets ASME B0.1 Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions NI4 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Hand Chain Hoists Series 6 The Series 6 Hand Chain Hoist features a simple, efficient and economical design for easy installation and use. Equipped with hardened load chain for flexibility and long wear Compact design, low head room and light weight steel construction for easy installation, even in confined spaces Hand wheel cover with guide slots minimizes jamming and slipping Forged swivel hooks with latches reduce twisting of chain and unintentional unhooking of load when chain is slack Standard hand chain drop is feet less than lift Do not exceed working load limit, load rating capacitycity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Load Capacity (US ton) Lift Required Hand Chain to Lift Capacity Pull to Lift Rated Load 10 9 5 14980 1 1/ 15 9 5 14981³ 1 10 7 77 1498³ 1 1 15 7 77 1498³ 1 Usually ships in 1 to weeks Hurricane 60 For the ultimate flexibility in a hand chain hoist, the CM Hurricane 60 is the choice for a wide range of applications. The patented hand chain cover rotates a full 60 to allow loads to be lifted, pulled or positioned from virtually any angle. In addition to providing maximum versatility, this unit offers a convenient way to maneuver loads without standing under the load. The Hurricane 60 provides a tool for addressing unique jobs in a broad range of environments. Meets ASME B0.16 and European CE Standard The Hurricane 60 is ideal when working: In tight spaces where the rigid handle of a lever hoist would be difficult to maneuver and operate Above the load being lifted On a drifting application where the hand chain angle adjusts throughout the operation With large loads to allow the operator to be a safe distance away. Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Load Capacity (US ton) Lift Required Hand Chain to Lift Capacity Pull to Lift Rated Load 10 0 44 1498³ 1 1/ 15 0 44 1498³ 1 10 49 54 14984³ 1 1 15 49 54 14985³ 1 Usually ships in 1 to weeks Cyclone The CM Cyclone Hand Chain Hoist features superior engineering, efficiency, and durability and is considered one of the most popular hand chain hoists ever designed. Inspected to meet or exceed HMI and ASME/ANSI performance and safety standards Standard hand chain drop is feet less than lift Do not exceed working load limit, load rating capacity Do not use to lift people or loads over people Use only alloy chain for overhead lifting Read and follow all instructions Load Capacity (US ton) Lift Required Hand Chain to Lift Capacity Pull to Lift Rated Load 10-1/ 149840³ 1 1/4 15-1/ 149841³ 1 10-1/ 46 14984³ 1 1/ 15-1/ 46 14984³ 1 10 0 69 149844³ 1 1 15 0 69 149845³ 1 Usually ships in 1 to weeks USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI4
NEW s Tool Box Slings Grade 80 7/" Grade 80 Chain comes with master grablink, sling ID tag and two eye sling hooks Tool box size light weight and portable Adjustable general-purpose utility sling Lifts uneven loads easily Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Chain 7/ Reach 90 60 45 0 6,100 1,800 1,450 1,050 14981 1 10,100 1,800 1,450 1,050 9886 1 NI44 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Heavy Duty Hoist Rings Material: Forged high strength 4140 alloy steel Range of Movement: Swivel 60, Pivot 180 under load Design Factor: Minimum of 5:1 Meets manufacturing and design requirements of ASME-B0.6 and MIL-STD 09 Magnetic particle inspected per ASTM 1444 Black oxide coated Each individually serial numbered Use Hoist Rings for added lifting safety to avoid eyebolt twisting, bending and breaking when lifting heavy, angular, unbalanced loads Pivot 180 Swivel 60 Fractional Thread Working Load Limit Recommended Installation Torque (Ft. Lb.) A B C D E F K L M /8-16 1,000 1 0.65.9 0.96 0.44 0.56. 1.5 0.15 1.45 14167¹ 1 1,000 1 0.65.9 0.96 0.44 1.06. 1.5 0.15 1.45 58655 1,50 5 0.65.9 0.96 0.44 1.06. 1.5 0.15 1.45 14168¹ 1 1/-1,500 8 1.00.50 1.50 0.75 0.75 5.1 1.89 0.17.56 14169¹ 1,500 8 1.00.50 1.50 0.75 1.00 5.1 1.89 0.17.56 58656 1 5/8-11 4,000 60 1.00.50 1.50 0.75 1.00 5.1 1.89 0.17.44 58657 1 /4-10 5,000 100 1.00.50 1.50 0.75 1.00 5.1 1.89 0.17.1 58658 1 5,000 100 1.00.50 1.50 0.75 1.50 5.1 1.89 0.17.1 14180¹ 1 1-8 10,000 0 1.40 5.10.05 1.00 1.45 7.7.81 0.18.0 58659 1 10,000 0 1.40 5.10.05 1.00 1.0 7.7.81 0.18.0 1419¹ 1 1 Usually ships in to 4 days Metric Thread Working Load Limit (kg) Recommended Installation Torque (Nm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) K (mm) L (mm) M (mm) M8x1.5 400 9.5 16.5 58. 4.4 11.1 16 8.0 1.8 4.0 8.5 140¹ 1 M10x1.5 450 16.0 16.5 58. 4.4 11.1 16 8.0 1.8 4.0 6.5 1405¹ 1 450 16.0 16.5 58. 4.4 11.1 6 8.0 1.8 4.0 6.5 1406 1 M1x1.75 1,050 7.0 5.4 88.9 8.1 19.1 5 14.9 48.0 4.4 65.0 1407 1 M16x.0 1,900 80.0 5.4 88.9 8.1 19.1 5 14.9 48.0 4.4 6.0 1415 1 1,900 80.0 5.4 88.9 8.1 19.1 5 174.6 48.0 4.4 101.7 1416*¹ 1 M0x.5,00 15.0 5.4 88.9 8.1 19.1 5 14.9 48.0 4.4 58.7 1419 1,00 15.0 5.4 88.9 8.1 19.1 8 14.9 48.0 4.4 58.7 141¹ 1 M4x.0 4,00 11.0 5.6 19.5 5.1 5.4 8 187. 71.4 4.6 85.7 147 1 M6x4.0 11,000 1,085.5 50.8 171.5 7.9 1.8 67 4. 98.5 8. 88.6 144¹ 1 *Long bar model 1 Usually ships in to 4 days USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI45
NEW s Stainless Steel Safety Engineered Hoist Rings Material: 00 Series stainless steel Design Factor: 5:1 Range of Movement: Swivel 60, Pivot 180 under load NDT: Liquid penetrant tested per ASTM-E 1417 Purification Process: Clean and passivate per ASTM-A967 Typical Applications: Use stainless for corrosive, cryogenic or elevated temperature environments All dimensions approximate variations do not affect use or design factor Each individually serial numbered Use Hoist Rings for added lifting safety to avoid eyebolt twisting, bending and breaking when lifting heavy, angular, unbalanced loads Fractional Thread Working Load Limit Recommended Installation Torque (Ft. Lb.) Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. H Dim. J Dim. K Dim. L Dim. M 1/4-0 75.5 0.4 1.61 0.71 /8 0.54.67 1.84 1.00 0.75 0.17 1. 1404¹ 1 5/16-18 400.5 0.4 1.61 0.71 /8 0.9.67 1.84 1.00 0.75 0.17 1.7 1405¹ 1 400.5 0.4 1.61 0.71 /8 0.54.67 1.84 1.00 0.75 0.17 1.7 1406¹ 1 /8-16 500 6 0.4 1.61 0.71 /8 0.54.67 1.84 1.00 0.75 0.17 1.1 1407¹ 1 1/-1 1,50 14 0.70.40 0.9 1/ 1.07.77.58 1.49 1.5 0.0 1.84 1408¹ 1 1,50 14 0.88.5 1. /4 0.78 4.78.5 1.99 1.50 0.16.1 1409¹ 1 5/8-11,000 0 0.88.5 1. /4 0.78 4.78.5 1.99 1.50 0.16.18 1415¹ 1,000 0 0.88.5 1. /4 1.8 4.78.5 1.99 1.50 0.16.18 1418¹ 1 /4-10,500 50 0.88.5 1. /4 1.5 4.78.5 1.99 1.50 0.16.06 14¹ 1,500 50 1.40 4.80 1.71 1 1.04 6.5 5.14.00.7 0.4.06 144¹ 1 1 Usually ships in to 4 days Metric Thread Working Load Limit (kg) Recommended Installation Torque (Nm) Dim. A (mm) Dim. B (mm) Dim. C (mm) Dim. D (mm) Dim. E (mm) M10x1.5 5 8.0 10.9 40.9 18.0 9.5 17 67.8 46.7 5.4 19.1 4. 0. 144¹ 1 M1x1.75 55 18.5.4 8.5 1.0 19.0 19 11.4 89.4 50.5 8.0 4.1 59.4 144¹ 1 M16x.0 950 40.0,4 8.5 1.0 19.0 4 11.4 89.4 50.5 8.0 4.1 55.4 1445*¹ 1 M0x.5 1,100 67.5.4 8.5 1.0 19.0 0 11.4 89.4 50.5 8.0 4.1 51.4 1447¹ 1 M4x.0,100 155.5 5.6 11. 4.4 5.4 4 165.8 10.5 76. 58.7 6.1 7.0 1449¹ 1 *Long bar model 1 Usually ships in to 4 days Dim. F (mm) Dim. H (mm) Dim. J (mm) Dim. K (mm) Dim. L (mm) Dim. M (mm) NI46 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Flip-Flop Hoist Rings Forged chrome moly steel Heat treated Black oxide finish Pivot 180 under load 6:1 design factor High strength screws are 100% Magnaflux inspected Rings and bodies are Magnafluxed per ASTM 1444 Use Hoist Rings for added lifting safety to avoid eyebolt twisting, bending and breaking when lifting heavy, angular, unbalanced loads Thread Screw of Screws Working Load Limit Recommended Installation Torque (Ft. Lb.) Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Dim. H Dim. R Replacement Screws 5/16-18 1-1/4,000 4-7 1-/4 1 5/16-1/ /4 0 1/ 14417 1441*¹ 1 /8-16 1-1/4,500 7-10 -1/ -1/4 1-1/8 /8 -/16 7/8 0 5/8 14418 1441*¹ 1 1/-1 5,000 0-5 -5/8 1-1/ 1/ -7/8 1-1/8 0 /4 14419 14414*¹ 1 1/-1-1/4 4 1,000 0-5 4-1/8 1-5/8 /4 5-1/4 1-/8 1-1/4 7/8 1440 14415*¹ 1 5/8-11 -/4 4 0,000 4-50 5-5/8-1/16 1 6-/16 1-7/8 1-1/4 1 1441 14416*¹ 1 *Mounting screws included 1 Usually ships in to 4 days USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI47
NEW s Tuff-Edge Web Slings Blue polymer edge yarns are x more cut resistant for extended sling life Silver color treatment on body for x better abrasion resistance Tuff-Tag for permanent identification required by OSHA Proven sling web construction with red core warning yarns Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Slings " and wider have tapered eyes. One Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4 1,600 1,80,00 14150 1 6 1,600 1,80,00 14154 1 8 1,600 1,80,00 14158 1 10 1,600 1,80,00 14154² 1 1 1,600 1,80,00 141546² 1 4,00,500 6,400 141568 1 6,00,500 6,400 14157 1 8,00,500 6,400 141576 1 10,00,500 6,400 141580² 1 1,00,500 6,400 141584² 1 4 4,800,800 9,600 141604² 1 6 4,800,800 9,600 141608² 1 8 4,800,800 9,600 14161² 1 10 4,800,800 9,600 141616² 1 1 4,800,800 9,600 14160² 1 4 6,400 5,000 1,800 141640² 1 6 6,400 5,000 1,800 141644² 1 8 6,400 5,000 1,800 141648² 1 10 6,400 5,000 1,800 14165² 1 1 6,400 5,000 1,800 141656² 1 LiftAll Web Sling Comparison Style Use Material Identification Features Tuff-Edge Rugged Polyester Blue edge Blue center stripe Silver surface Daily use under good-torugged lifting conditions x edge cut resistance Webmaster Daily Polyester Blue center stripe Daily use under good-tomoderate lifting conditions 1600 Polyester stretches less for better load control, reduced abrasion Nylon No center stripe Daily use under good-tomoderate lifting conditions Nylon stretches more to help avoid shock loading Webmaster Occasional Polyester Blue center stripe 100 Black yarn on one edge Nylon No center stripe Black yarn on one edge Less frequent use under good lifting conditions Polyester stretches less for better load control, reduced abrasion Less frequent use under good lifting conditions Nylon stretches more to help avoid shock loading Two Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4,00,500 6,400 141714 1 6,00,500 6,400 141718 1 8,00,500 6,400 1417 1 10,00,500 6,400 14176² 1 1,00,500 6,400 14170² 1 4 6,400 5,000 1,800 14175 1 6 6,400 5,000 1,800 141756 1 8 6,400 5,000 1,800 141760 1 10 6,400 5,000 1,800 141764² 1 1 6,400 5,000 1,800 141768² 1 4 8,800 7,040 17,600 141788² 1 6 8,800 7,040 17,600 14179 1 8 8,800 7,040 17,600 141796 1 10 8,800 7,040 17,600 141800² 1 1 8,800 7,040 17,600 141804² 1 4 11,500 9,00,000 14184² 1 6 11,500 9,00,000 14188 1 8 11,500 9,00,000 1418 1 10 11,500 9,00,000 14186² 1 1 11,500 9,00,000 141840² 1 NI48 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Tuff-Edge Web Slings Blue polymer edge yarns are x more cut resistant for extended sling life Silver color treatment on body for x better abrasion resistance Tuff-Tag for permanent identification required by OSHA Proven sling web construction with red core warning yarns Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. One Ply Endless (Type 5) Vertical Choker Basket 4,00,500 6,400 141896 1 6,00,500 6,400 141898 1 1 8,00,500 6,400 141900 1 10,00,500 6,400 14190² 1 1,00,500 6,400 141904² 1 4 6,400 5,000 1,800 141915 1 6 6,400 5,000 1,800 141917 1 8 6,400 5,000 1,800 141919² 1 10 6,400 5,000 1,800 14191² 1 1 6,400 5,000 1,800 1419² 1 4 8,800 7,040 17,600 1419² 1 6 8,800 7,040 17,600 14195² 1 8 8,800 7,040 17,600 14197² 1 10 8,800 7,040 17,600 14199² 1 1 8,800 7,040 17,600 141941² 1 4 11,500 9,00,000 141951² 1 6 11,500 9,00,000 14195² 1 4 8 11,500 9,00,000 141955² 1 10 11,500 9,00,000 141957² 1 1 11,500 9,00,000 141959² 1 Sling Use Configurations Vertical Choker Basket Two Ply Endless (Type 5) 1 4 Vertical Choker Basket 4 6,00 4,900 1,400 141988² 1 6 6,00 4,900 1,400 141990² 1 8 6,00 4,900 1,400 14199² 1 10 6,00 4,900 1,400 141994² 1 1 6,00 4,900 1,400 141996² 1 4 1,400 9,900 4,800 141007² 1 6 1,400 9,900 4,800 141009² 1 8 1,400 9,900 4,800 141011² 1 10 1,400 9,900 4,800 14101² 1 1 1,400 9,900 4,800 141015² 1 4 16,00 1,000,600 14105² 1 6 16,00 1,000,600 14107² 1 8 16,00 1,000,600 14109² 1 10 16,00 1,000,600 14101² 1 1 16,00 1,000,600 1410² 1 4 0,700 16,500 41,400 14104² 1 6 0,700 16,500 41,400 141045² 1 8 0,700 16,500 41,400 141047² 1 10 0,700 16,500 41,400 141049² 1 1 0,700 16,500 41,400 141051² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI49
NEW s Webmaster 1600 Polyester Web Slings The industrial standard in web slings Red core warning yarns aid inspection process Polyester webbing stretches less for better control Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Slings " and wider have tapered eyes. One Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4 1,600 1,80,00 141850 1 6 1,600 1,80,00 141854 1 8 1,600 1,80,00 141858 1 10 1,600 1,80,00 14186² 1 1 1,600 1,80,00 141866² 1 4,00,500 6,400 141888 1 6,00,500 6,400 14189 1 8,00,500 6,400 141896 1 10,00,500 6,400 141900² 1 1,00,500 6,400 141904² 1 4 4,800,800 9,600 14194² 1 6 4,800,800 9,600 14198² 1 8 4,800,800 9,600 1419² 1 10 4,800,800 9,600 14196² 1 1 4,800,800 9,600 141940² 1 4 6,400 5,000 1,800 141960² 1 6 6,400 5,000 1,800 141964² 1 8 6,400 5,000 1,800 141968² 1 10 6,400 5,000 1,800 14197² 1 1 6,400 5,000 1,800 141976² 1 Choker Hitch Angles Adjusted Choker Hitch Capacity = Choker Hitch Capacity x Reduction Factor Synthetic Slings Angle of Choke > or = < Reduction Factor 10 180 1.00 105 10 0.8 90 105 0.71 60 90 0.58 0 60 0.50 Angle of Choke Two Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4,00,500 6,400 141404 1 6,00,500 6,400 141408 1 8,00,500 6,400 141404 1 10,00,500 6,400 1414046² 1 1,00,500 6,400 1414050² 1 4 6,400 5,000 1,800 141407 1 6 6,400 5,000 1,800 1414076 1 8 6,400 5,000 1,800 1414080 1 10 6,400 5,000 1,800 1414084² 1 1 6,400 5,000 1,800 1414088² 1 4 8,800 7,040 17,600 1414108² 1 6 8,800 7,040 17,600 141411² 1 8 8,800 7,040 17,600 1414116² 1 10 8,800 7,040 17,600 141410² 1 1 8,800 7,040 17,600 141414² 1 4 11,500 9,00,000 1414144² 1 6 11,500 9,00,000 1414148² 1 8 11,500 9,00,000 141415² 1 10 11,500 9,00,000 1414156² 1 1 11,500 9,00,000 1414160² 1 NI50 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Webmaster 1600 Polyester Web Slings The industrial standard in web slings Red core warning yarns aid inspection process Polyester webbing stretches less for better control Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. One Ply Endless (Type 5) 1 4 Vertical Choker Basket 4,00,500 6,400 141416 1 6,00,500 6,400 141418 1 8,00,500 6,400 14140² 1 10,00,500 6,400 1414² 1 1,00,500 6,400 14144² 1 4 6,400 5,000 1,800 14145² 1 6 6,400 5,000 1,800 14147 1 8 6,400 5,000 1,800 14149² 1 10 6,400 5,000 1,800 141441² 1 1 6,400 5,000 1,800 14144² 1 4 8,800 7,040 17,600 14145² 1 6 8,800 7,040 17,600 141455² 1 8 8,800 7,040 17,600 141457² 1 10 8,800 7,040 17,600 141459² 1 1 8,800 7,040 17,600 141461² 1 4 11,500 9,00,000 141471² 1 6 11,500 9,00,000 14147² 1 8 11,500 9,00,000 141475² 1 10 11,500 9,00,000 141477² 1 1 11,500 9,00,000 141479² 1 Two Ply Endless (Type 5) 1 4 Vertical Choker Basket 4 6,00 4,900 1,400 141408² 1 6 6,00 4,900 1,400 141410² 1 8 6,00 4,900 1,400 14141² 1 10 6,00 4,900 1,400 141414² 1 1 6,00 4,900 1,400 141416² 1 4 1,400 9,900 4,800 14147² 1 6 1,400 9,900 4,800 14149² 1 8 1,400 9,900 4,800 14141² 1 10 1,400 9,900 4,800 1414² 1 1 1,400 9,900 4,800 14145² 1 4 16,00 1,000,600 141445² 1 6 16,00 1,000,600 141447² 1 8 16,00 1,000,600 141449² 1 10 16,00 1,000,600 141451² 1 1 16,00 1,000,600 14145² 1 4 0,700 16,500 41,400 14146² 1 6 0,700 16,500 41,400 141465² 1 8 0,700 16,500 41,400 141467² 1 10 0,700 16,500 41,400 141469² 1 1 0,700 16,500 41,400 141471² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI51
NEW s Webmaster 1600 Nylon Web Slings The industrial standard in web slings Red core warning yarns aid inspection process Nylon web stretches more, helps avoid shock loading Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Slings " and wider have tapered eyes. One Ply Flat Eye (Type ) Vertical Choker Basket 1,600 1,80,00 6806 1 1 6 1,600 1,80,00 6807 1 8 1,600 1,80,00 909 1 10 1,600 1,80,00 9094 1,00,500 6,400 6808 1 6,00,500 6,400 6809 1 8,00,500 6,400 9095 1 10,00,500 6,400 9096 1 4 6 6,400 5,000 1,800 6810 1 One Ply Twisted Eye (Type 4) Vertical Choker Basket 8,00,500 6,400 9099 1 Two Ply Flat Eye (Type ) Vertical Choker Basket 6,400 5,000 1,800 96 1 6 6,400 5,000 1,800 96 1 8 6,400 5,000 1,800 9001 1 10 6,400 5,000 1,800 900 1 6 8,800 7,040 17,600 6811 1 8 8,800 7,040 17,600 900 1 10 8,800 7,040 17,600 9004 1 One Ply Triangle and Choker (Type 1) The forged alloy steel attachments on either end extend sling life by resisting wear Most commonly used as a choker hitch but can also be used in basket and vertical hitches Vertical Choker Basket 8,00,400 6,400 9005 1 1,00,400 6,400 9006 1 NI5 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Webmaster 100 Polyester Web Slings Red core warning yarns aid inspection process Polyester webbing stretches less for better control Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Wider bearing surface per capacity helps protect load surface Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Slings " and wider have tapered eyes. One Ply Flat Eye (Type ) 1 4 Two Ply Flat Eye (Type ) 1 4 Vertical Choker Basket 4,400 1,900 4,800 141554² 1 6,400 1,900 4,800 141558² 1 8,400 1,900 4,800 14156² 1 10,400 1,900 4,800 141566² 1 1,400 1,900 4,800 141570² 1 4 4,800,800 9,600 14159² 1 6 4,800,800 9,600 141596² 1 8 4,800,800 9,600 1415400² 1 10 4,800,800 9,600 1415404² 1 1 4,800,800 9,600 1415408² 1 4 6,600 5,80 1,00 141548² 1 6 6,600 5,80 1,00 14154² 1 8 6,600 5,80 1,00 141546² 1 10 6,600 5,80 1,00 1415440² 1 1 6,600 5,80 1,00 1415444² 1 4 8,600 6,900 17,00 1415464² 1 6 8,600 6,900 17,00 1415468² 1 8 8,600 6,900 17,00 141547² 1 10 8,600 6,900 17,00 1415476² 1 1 8,600 6,900 17,00 1415480² 1 Vertical Choker Basket 4 1,00 0,950,400 1415170² 1 6 1,00 0,950,400 1415174² 1 8 1,00 0,950,400 1415178² 1 10 1,00 0,950,400 141518² 1 1 1,00 0,950,400 1415186² 1 4,400 1,900 4,800 141508² 1 6,400 1,900 4,800 14151² 1 8,400 1,900 4,800 141516² 1 10,400 1,900 4,800 14150² 1 1,400 1,900 4,800 14154² 1 4,600,900 7,00 141544² 1 6,600,900 7,00 141548² 1 8,600,900 7,00 14155² 1 10,600,900 7,00 141556² 1 1,600,900 7,00 141560² 1 4 4,800,800 9,600 141580² 1 6 4,800,800 9,600 141584² 1 8 4,800,800 9,600 141588² 1 10 4,800,800 9,600 14159² 1 1 4,800,800 9,600 141596² 1 Effect of Angles Vertical Angle from Horizontal Basket Angle from Horizontal Angle from Horizontal Sling capacity decreases as the angle from the horizontal decreases. Adjusted Capacity = Capacity x Reduction Factor Reduction Factor 90 1.000 85 0.996 80 0.985 75 0.966 70 0.940 65 0.906 60 0.866 55 0.819 50 0.766 45 0.707 40 0.64 5 0.574 0 0.500 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI5
NEW s Webmaster 100 Polyester Web Slings Red core warning yarns aid inspection process Polyester webbing stretches less for better control Tuff-Tag for permanent identification required by OSHA Yellow abrasion-resistant treatment Wider bearing surface per capacity helps protect load surface Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. One Ply Endless (Type 5) Vertical Choker Basket 4,400 1,900 4,800 141556² 1 6,400 1,900 4,800 141558² 1 1 8,400 1,900 4,800 1415540² 1 10,400 1,900 4,800 141554² 1 1,400 1,900 4,800 1415544² 1 4 4,800,800 9,600 1415555² 1 6 4,800,800 9,600 1415557² 1 8 4,800,800 9,600 1415559² 1 10 4,800,800 9,600 1415561² 1 1 4,800,800 9,600 141556² 1 4 6,500 5,00 1,000 141557² 1 6 6,500 5,00 1,000 1415575² 1 8 6,500 5,00 1,000 1415577² 1 10 6,500 5,00 1,000 1415579² 1 1 6,500 5,00 1,000 1415581² 1 4 8,600 6,900 17,00 1415591² 1 6 8,600 6,900 17,00 141559² 1 4 8 8,600 6,900 17,00 1415595² 1 10 8,600 6,900 17,00 1415597² 1 1 8,600 6,900 17,00 1415599² 1 Two Ply Endless (Type 5) 1 4 Vertical Choker Basket 4 6,00 4,900 1,400 141568² 1 6 6,00 4,900 1,400 141560² 1 8 6,00 4,900 1,400 14156² 1 10 6,00 4,900 1,400 141564² 1 1 6,00 4,900 1,400 141566² 1 4 9,600 7,700 19,00 1415647² 1 6 9,600 7,700 19,00 1415649² 1 8 9,600 7,700 19,00 1415651² 1 10 9,600 7,700 19,00 141565² 1 1 9,600 7,700 19,00 1415655² 1 4 11,700 9,400,400 1415665² 1 6 11,700 9,400,400 1415667² 1 8 11,700 9,400,400 1415669² 1 10 11,700 9,400,400 1415671² 1 1 11,700 9,400,400 141567² 1 4 15,500 1,400 1,000 141568² 1 6 15,500 1,400 1,000 1415685² 1 8 15,500 1,400 1,000 1415687² 1 10 15,500 1,400 1,000 1415689² 1 1 15,500 1,400 1,000 1415691² 1 NI54 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Tuflex Roundslings Endless Tuflex Roundslings Eye and Eye Double wall cover for greater sling life Color-coded capacities for quick identification No strength loss from abrasion to cover Chokes tighter, releases easier than other slings Wear points can be shifted to extend sling life Easier to inspect than any other type of sling Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Color Rated Capacity: Vertical Rated Capacity: Choker Rated Capacity: Basket 4 Purple,600,100 5,00 141588 1 6 Purple,600,100 5,00 141580 1 8 Purple,600,100 5,00 14158 1 10 Purple,600,100 5,00 141584 1 1 Purple,600,100 5,00 141586² 1 4 Green 5,00 4,00 10,600 1415847 1 6 Green 5,00 4,00 10,600 1415849 1 8 Green 5,00 4,00 10,600 1415851 1 10 Green 5,00 4,00 10,600 141585 1 1 Green 5,00 4,00 10,600 1415855² 1 Yellow 8,400 6,700 16,800 9887 1 4 Yellow 8,400 6,700 16,800 1415865 1 6 Yellow 8,400 6,700 16,800 9888 1 8 Yellow 8,400 6,700 16,800 1415869 1 10 Yellow 8,400 6,700 16,800 9889 1 1 Yellow 8,400 6,700 16,800 141587² 1 4 Red 1,00 10,600 6,400 1415901² 1 6 Red 1,00 10,600 6,400 141590 1 8 Red 1,00 10,600 6,400 1415905 1 10 Red 1,00 10,600 6,400 1415907 1 1 Red 1,00 10,600 6,400 1415909² 1 4 Blue 1,00 17,000 4,400 141597² 1 6 Blue 1,00 17,000 4,400 141599² 1 8 Blue 1,00 17,000 4,400 1415941² 1 10 Blue 1,00 17,000 4,400 141594² 1 1 Blue 1,00 17,000 4,400 1415945² 1 Black, wear resistant jacket over entire body for greater sling life Color-coded eyes for quick identification of capacity No strength loss from abrasion to cover Chokes tighter, releases easier than other slings Easier to inspect than any other type of sling Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Color Rated Capacity: Vertical Rated Capacity: Choker Rated Capacity: Basket 4 Purple,600,100 5,00 1416011² 1 6 Purple,600,100 5,00 141601² 1 8 Purple,600,100 5,00 1416015² 1 10 Purple,600,100 5,00 1416017² 1 1 Purple,600,100 5,00 1416019² 1 4 Green 5,00 4,00 10,600 141608² 1 6 Green 5,00 4,00 10,600 141600² 1 8 Green 5,00 4,00 10,600 14160² 1 10 Green 5,00 4,00 10,600 141604² 1 1 Green 5,00 4,00 10,600 141606² 1 4 Yellow 8,400 6,700 16,800 1416045² 1 6 Yellow 8,400 6,700 16,800 1416047² 1 8 Yellow 8,400 6,700 16,800 1416049² 1 10 Yellow 8,400 6,700 16,800 1416051² 1 1 Yellow 8,400 6,700 16,800 141605² 1 6 Red 1,00 10,600 6,400 1416079² 1 8 Red 1,00 10,600 6,400 1416081² 1 10 Red 1,00 10,600 6,400 141608² 1 1 Red 1,00 10,600 6,400 1416085² 1 8 Blue 1,00 17,000 4,400 1416109² 1 10 Blue 1,00 17,000 4,400 1416111² 1 1 Blue 1,00 17,000 4,400 141611² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI55
NEW s Direct Connect Hooks Permaloc Wire Rope Slings Eye and Eye 1417600 141760 141760² 1417601 Direct Connect Hooks are the quickest and easiest way to add hooks to Tuflex roundslings and web slings at your job site. No tools or extra parts needed. Just match the color-coded hook to the same color Tuflex and you re ready to go. Rated capacities are the same for both the hook and the Tuflex. Both alloy steel hook and latch are forged for superior toughness Hook color matches Tuflex color for easy identification Four hook sizes to match Tuflex sizes Can be used with 1" and " web slings Color Purple,600 1417600 1 Green 5,00 1417601 1 Yellow 8,400 141760 1 Red 1,00 141760² 1 Wear Pads If the sling is not properly protected there is a high probability that synthetic slings in direct contact with load edges will be cut, resulting in sling failure and possibly death. Always use Wear Pads to protect your slings from damage and your workers from catastrophe. Helps to protect synthetic and metal slings, as well as the product being lifted Hook and loop fastener on one edge makes these pads easy to install and remove Basic flat style fits most applications Wear pads may not prevent cutting or other sling damage. To avoid severe personal injury or death, keep all personnel clear of loads about to be lifted and suspended loads. Thickness Material Color 4 1 5/16 Synthetic Felt (Pukka) White 141758 1 6 1 5/16 Synthetic Felt (Pukka) White 141758 1 8 1 5/16 Synthetic Felt (Pukka) White 1417584² 1 6x19, EIP, IWRC quality domestic wire rope Mechanically swaged, flemish eye splice Tuff-Tag shows OSHA required rated capacities Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Dia. Rated Capacity: Vertical (US ton) Rated Capacity: Choker (US ton) Rated Capacity: Basket (US ton) 4 0.65 0.48 1. 681 1 6 0.65 0.48 1. 681 1 1/4 8 0.65 0.48 1. 141674² 1 10 0.65 0.48 1. 141676² 1 1 0.65 0.48 1. 141678² 1 4 1.4 1.1.9 141689² 1 6 1.4 1.1.9 141691² 1 /8 8 1.4 1.1.9 14169² 1 10 1.4 1.1.9 141695² 1 1 1.4 1.1.9 141697² 1 4.5 1.9 5.1 1416408 1 6.5 1.9 5.1 681 1 1/ 8.5 1.9 5.1 141641 1 10.5 1.9 5.1 1416414 1 1.5 1.9 5.1 1416416 1 4.9.9 7.8 141647² 1 6.9.9 7.8 141649² 1 5/8 8.9.9 7.8 141641² 1 10.9.9 7.8 14164² 1 1.9.9 7.8 141645² 1 4 5.6 4.1 11 1416445² 1 6 5.6 4.1 11 1416447² 1 /4 8 5.6 4.1 11 1416449² 1 10 5.6 4.1 11 1416451² 1 1 5.6 4.1 11 141645² 1 4 9.8 7. 0 141646² 1 6 9.8 7. 0 1416465² 1 1 8 9.8 7. 0 1416467² 1 10 9.8 7. 0 1416469² 1 1 9.8 7. 0 1416471² 1 Choker Hitch Angles Adjusted Choker Hitch Capacity = Choker Hitch Capacity x Reduction Factor Wire Rope Slings Angle of Choke > or = < Reduction Factor 10 180 1.00 90 10 0.87 60 90 0.74 0 60 0.6 0 0 0.49 Angle of Choke NI56 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Permaloc Wire Rope Slings 6x9, EIP, IWRC quality domestic wire rope Mechanically swaged flemish eye splice Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. Sliding Choker Dia. 1/4 /8 1/ 5/8 /4 Choker (US ton) 4 0.48 1416480² 1 6 0.48 1416481² 1 8 0.48 141648² 1 10 0.48 141648² 1 1 0.48 1416484² 1 4 1.1 1416485² 1 6 1.1 1416486² 1 8 1.1 1416487² 1 10 1.1 1416488² 1 1 1.1 1416489² 1 4 1.9 1416490² 1 6 1.9 1416491² 1 8 1.9 141649² 1 10 1.9 141649² 1 1 1.9 1416494² 1 4.9 1416495² 1 6.9 1416496² 1 8.9 1416497² 1 10.9 1416498² 1 1.9 1416499² 1 4 4.1 1416500² 1 6 4.1 1416501² 1 8 4.1 141650² 1 10 4.1 141650² 1 1 4.1 1416504² 1 Tuff-Tag shows OSHA required rated capacities Thimbled choke eye for secure, long-lasting choker assembly Two Leg Bridle Dia. 1/4 /8 1/ 5/8 /4 1 Rated Capacity: 60 (US ton) Rated Capacity: 45 (US ton) Rated Capacity: 0 (US ton) 4 1.1 0.91 0.65 1416507² 1 6 1.1 0.91 0.65 1416509² 1 8 1.1 0.91 0.65 1416511² 1 10 1.1 0.91 0.65 141651² 1 1 1.1 0.91 0.65 1416515² 1 4.5 1.4 141656² 1 6.5 1.4 141658² 1 8.5 1.4 141650² 1 10.5 1.4 14165² 1 1.5 1.4 141654² 1 4 4.4.6.5 1416544² 1 6 4.4.6.5 1416546² 1 8 4.4.6.5 1416548² 1 10 4.4.6.5 1416550² 1 1 4.4.6.5 141655² 1 4 6.8 5.5.9 141656² 1 6 6.8 5.5.9 1416564² 1 8 6.8 5.5.9 1416566² 1 10 6.8 5.5.9 1416568² 1 1 6.8 5.5.9 1416570² 1 4 9.7 7.9 5.6 1416579² 1 6 9.7 7.9 5.6 1416581² 1 8 9.7 7.9 5.6 141658² 1 10 9.7 7.9 5.6 1416585² 1 1 9.7 7.9 5.6 1416587² 1 6 17 14 9.8 1416597² 1 8 17 14 9.8 1416599² 1 10 17 14 9.8 1416601² 1 1 17 14 9.8 141660² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI57
NEW s Adjust-A-Link Chain Slings The most easily adjustable and versatile chain sling available. Alloy steel master control link for long life. Grade 100 alloy steel lifting chain. Adjust leg length one or multiple links at a time. Lift in single, double leg or basket hitch. Chain cannot be removed from the master control plate, assuring the capacity rating will not be compromised The most versatile style of chain sling Adjust one or multiple links at one time to keep load level Alloy steel master link Complies with OSHA proof-tested and certified Grade 100 chain Never exceed rated capacities. Chain must be seated at the base of adjusting slot of the Master Control Link. Chain Reach Grade 90 60 7/ 6 100,700 4,700 1416896 1 10 100,700 4,700 1416898 1 9/ 6 100 4,00 7,400 1416900 1 10 100 4,00 7,400 141690 1 /8 10 100 8,800 15,00 1416904² 1 14 100 8,800 15,00 1416906² 1 1/ 10 80 1,000 0,800 1416908² 1 14 80 1,000 0,800 1416910² 1 Roughneck Wire Mesh Slings Triangle and Choker Made with high tensile steel mesh and alloy steel end fittings, these slings are widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings. Great for use in metalworking shops Steel construction resists abrasion and cutting Good flexibility and low stretch reduce load damage Mesh width helps control and balance loads Each sling proof tested and certified Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. The choker fitting must not be positioned against a load edge or directly on the triangle fitting. 4 6 8 10 1 Vertical Choker Basket 4,00,00 4,600 1417079² 1 6,00,00 4,600 1417080² 1 8,00,00 4,600 1417081² 1 10,00,00 4,600 141708² 1 1,00,00 4,600 141708² 1 4,500,500 7,000 1417089² 1 6,500,500 7,000 1417090² 1 8,500,500 7,000 1417091² 1 10,500,500 7,000 141709² 1 1,500,500 7,000 141709² 1 4 4,800 4,800 9,600 1417099² 1 6 4,800 4,800 9,600 1417100² 1 8 4,800 4,800 9,600 1417101² 1 10 4,800 4,800 9,600 141710² 1 1 4,800 4,800 9,600 141710² 1 4 7,00 7,00 14,400 1417109² 1 6 7,00 7,00 14,400 1417110² 1 8 7,00 7,00 14,400 1417111² 1 10 7,00 7,00 14,400 141711² 1 1 7,00 7,00 14,400 141711² 1 4 9,600 9,600 19,00 1417119² 1 6 9,600 9,600 19,00 141710² 1 8 9,600 9,600 19,00 141711² 1 10 9,600 9,600 19,00 14171² 1 1 9,600 9,600 19,00 14171² 1 4 1,000 1,000 4,000 141719² 1 6 1,000 1,000 4,000 141710² 1 8 1,000 1,000 4,000 141711² 1 10 1,000 1,000 4,000 14171² 1 1 1,000 1,000 4,000 14171² 1 4 14,400 14,400 8,800 141719² 1 6 14,400 14,400 8,800 1417140² 1 8 14,400 14,400 8,800 1417141² 1 10 14,400 14,400 8,800 141714² 1 1 14,400 14,400 8,800 141714² 1 NI58 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Single Hooks Both Ends Chain 9/ /8 1/ Usually ships in 1 to weeks Reach Configuration Hook Type 90 SGG Grab Hooks 4,00 14186³ 1 SSG Sling Hook & Grab Hook 4,00 14187³ 1 SSS Sling Hooks 4,00 14188³ 1 4 SGG Grab Hooks 4,00 14189³ 1 4 SSG Sling Hook & Grab Hook 4,00 14180³ 1 4 SSS Sling Hooks 4,00 14181³ 1 6 SGG Grab Hooks 4,00 1418³ 1 6 SSG Sling Hook & Grab Hook 4,00 1418³ 1 6 SSS Sling Hooks 4,00 14184³ 1 8 SGG Grab Hooks 4,00 14185³ 1 8 SSG Sling Hook & Grab Hook 4,00 14186³ 1 8 SSS Sling Hooks 4,00 14187³ 1 10 SGG Grab Hooks 4,00 14188³ 1 10 SSG Sling Hook & Grab Hook 4,00 14189³ 1 10 SSS Sling Hooks 4,00 141840³ 1 SGG Grab Hooks 8,800 141841³ 1 SSG Sling Hook & Grab Hook 8,800 14184³ 1 SSS Sling Hooks 8,800 14184³ 1 4 SGG Grab Hooks 8,800 141844³ 1 4 SSG Sling Hook & Grab Hook 8,800 141845³ 1 4 SSS Sling Hooks 8,800 141846³ 1 6 SGG Grab Hooks 8,800 141847³ 1 6 SSG Sling Hook & Grab Hook 8,800 141848³ 1 6 SSS Sling Hooks 8,800 141849³ 1 8 SGG Grab Hooks 8,800 141850³ 1 8 SSG Sling Hook & Grab Hook 8,800 141851³ 1 8 SSS Sling Hooks 8,800 14185³ 1 10 SGG Grab Hooks 8,800 14185³ 1 10 SSG Sling Hook & Grab Hook 8,800 141854³ 1 10 SSS Sling Hooks 8,800 141855³ 1 SGG Grab Hooks 15,000 141856³ 1 SSG Sling Hook & Grab Hook 15,000 141857³ 1 SSS Sling Hooks 15,000 141858³ 1 4 SGG Grab Hooks 15,000 141859³ 1 4 SSG Sling Hook & Grab Hook 15,000 141860³ 1 4 SSS Sling Hooks 15,000 141861³ 1 6 SGG Grab Hooks 15,000 14186³ 1 6 SSG Sling Hook & Grab Hook 15,000 14186³ 1 6 SSS Sling Hooks 15,000 141864³ 1 8 SGG Grab Hooks 15,000 141865³ 1 8 SSG Sling Hook & Grab Hook 15,000 141866³ 1 8 SSS Sling Hooks 15,000 141867³ 1 10 SGG Grab Hooks 15,000 141868³ 1 10 SSG Sling Hook & Grab Hook 15,000 141869³ 1 10 SSS Sling Hooks 15,000 141870³ 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI59
NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Single 1 Leg Chain 9/ /8 1/ Reach Configuration Hook Type 90 SOG Grab Hook 4,00 141706³ 1 SOS Sling Hook 4,00 141707³ 1 4 SOG Grab Hook 4,00 141708³ 1 4 SOS Sling Hook 4,00 141709³ 1 6 SOG Grab Hook 4,00 141710³ 1 6 SOS Sling Hook 4,00 141711³ 1 8 SOG Grab Hook 4,00 14171³ 1 8 SOS Sling Hook 4,00 14171³ 1 10 SOG Grab Hook 4,00 141714³ 1 10 SOS Sling Hook 4,00 141715³ 1 SOG Grab Hook 8,800 141716³ 1 SOS Sling Hook 8,800 141717³ 1 4 SOG Grab Hook 8,800 141718³ 1 4 SOS Sling Hook 8,800 141719³ 1 6 SOG Grab Hook 8,800 14170³ 1 6 SOS Sling Hook 8,800 14171³ 1 8 SOG Grab Hook 8,800 1417³ 1 8 SOS Sling Hook 8,800 1417³ 1 10 SOG Grab Hook 8,800 14174³ 1 10 SOS Sling Hook 8,800 14175³ 1 SOG Grab Hook 15,000 14176³ 1 SOS Sling Hook 15,000 14177³ 1 4 SOG Grab Hook 15,000 14178³ 1 4 SOS Sling Hook 15,000 14179³ 1 6 SOG Grab Hook 15,000 14170³ 1 6 SOS Sling Hook 15,000 14171³ 1 8 SOG Grab Hook 15,000 1417³ 1 8 SOS Sling Hook 15,000 1417³ 1 10 SOG Grab Hook 15,000 14174³ 1 10 SOS Sling Hook 15,000 14175³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook NI60 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Double Legs Chain 9/ /8 1/ Reach Configuration Hook Type 60 45 0 DOG Grab Hook 7,400 6,100 4,00 14176³ 1 DOS Sling Hook 7,400 6,100 4,00 14177³ 1 4 DOG Grab Hook 7,400 6,100 4,00 14178³ 1 4 DOS Sling Hook 7,400 6,100 4,00 14179³ 1 6 DOG Grab Hook 7,400 6,100 4,00 141740³ 1 6 DOS Sling Hook 7,400 6,100 4,00 141741³ 1 8 DOG Grab Hook 7,400 6,100 4,00 14174³ 1 8 DOS Sling Hook 7,400 6,100 4,00 14174³ 1 10 DOG Grab Hook 7,400 6,100 4,00 141744³ 1 10 DOS Sling Hook 7,400 6,100 4,00 141745³ 1 DOG Grab Hook 15,00 1,400 8,800 141746³ 1 DOS Sling Hook 15,00 1,400 8,800 141747³ 1 4 DOG Grab Hook 15,00 1,400 8,800 141748³ 1 4 DOS Sling Hook 15,00 1,400 8,800 141749³ 1 6 DOG Grab Hook 15,00 1,400 8,800 141750³ 1 6 DOS Sling Hook 15,00 1,400 8,800 141751³ 1 8 DOG Grab Hook 15,00 1,400 8,800 14175³ 1 8 DOS Sling Hook 15,00 1,400 8,800 14175³ 1 10 DOG Grab Hook 15,00 1,400 8,800 141754³ 1 10 DOS Sling Hook 15,00 1,400 8,800 141755³ 1 DOG Grab Hook 6,000 1,00 15,000 141756³ 1 DOS Sling Hook 6,000 1,00 15,000 141757³ 1 4 DOG Grab Hook 6,000 1,00 15,000 141758³ 1 4 DOS Sling Hook 6,000 1,00 15,000 141759³ 1 6 DOG Grab Hook 6,000 1,00 15,000 141760³ 1 6 DOS Sling Hook 6,000 1,00 15,000 141761³ 1 8 DOG Grab Hook 6,000 1,00 15,000 14176³ 1 8 DOS Sling Hook 6,000 1,00 15,000 14176³ 1 10 DOG Grab Hook 6,000 1,00 15,000 141764³ 1 10 DOS Sling Hook 6,000 1,00 15,000 141765³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI61
NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Triple Legs Chain 9/ /8 1/ Reach Configuration Hook Type 60 45 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. 0 TOG Grab Hook 11,00 9,100 6,400 141766³ 1 TOS Sling Hook 11,00 9,100 6,400 141767³ 1 4 TOG Grab Hook 11,00 9,100 6,400 141768³ 1 4 TOS Sling Hook 11,00 9,100 6,400 141769³ 1 6 TOG Grab Hook 11,00 9,100 6,400 141770³ 1 6 TOS Sling Hook 11,00 9,100 6,400 141771³ 1 8 TOG Grab Hook 11,00 9,100 6,400 14177³ 1 8 TOS Sling Hook 11,00 9,100 6,400 14177³ 1 10 TOG Grab Hook 11,00 9,100 6,400 141774³ 1 10 TOS Sling Hook 11,00 9,100 6,400 141775³ 1 TOG Grab Hook,900 18,700 1,00 141776³ 1 TOS Sling Hook,900 18,700 1,00 141777³ 1 4 TOG Grab Hook,900 18,700 1,00 141778³ 1 4 TOS Sling Hook,900 18,700 1,00 141779³ 1 6 TOG Grab Hook,900 18,700 1,00 141780³ 1 6 TOS Sling Hook,900 18,700 1,00 141781³ 1 8 TOG Grab Hook,900 18,700 1,00 14178³ 1 8 TOS Sling Hook,900 18,700 1,00 14178³ 1 10 TOG Grab Hook,900 18,700 1,00 141784³ 1 10 TOS Sling Hook,900 18,700 1,00 141785³ 1 TOG Grab Hook 9,000 1,800,500 141786³ 1 TOS Sling Hook 9,000 1,800,500 141787³ 1 4 TOG Grab Hook 9,000 1,800,500 141788³ 1 4 TOS Sling Hook 9,000 1,800,500 141789³ 1 6 TOG Grab Hook 9,000 1,800,500 141790³ 1 6 TOS Sling Hook 9,000 1,800,500 141791³ 1 8 TOG Grab Hook 9,000 1,800,500 14179³ 1 8 TOS Sling Hook 9,000 1,800,500 14179³ 1 10 TOG Grab Hook 9,000 1,800,500 141794³ 1 10 TOS Sling Hook 9,000 1,800,500 141795³ 1 NI6 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Grade 100 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Quad 4 Legs Chain 9/ /8 1/ Reach Configuration Hook Type Rated Capacity: 60 Rated Capacity: 45 Rated Capacity: 0 QOG Grab Hook 11,00 9,100 6,400 141796³ 1 QOS Sling Hook 11,00 9,100 6,400 141797³ 1 4 QOG Grab Hook 11,00 9,100 6,400 141798³ 1 4 QOS Sling Hook 11,00 9,100 6,400 141799³ 1 6 QOG Grab Hook 11,00 9,100 6,400 141800³ 1 6 QOS Sling Hook 11,00 9,100 6,400 141801³ 1 8 QOG Grab Hook 11,00 9,100 6,400 14180³ 1 8 QOS Sling Hook 11,00 9,100 6,400 14180³ 1 10 QOG Grab Hook 11,00 9,100 6,400 141804³ 1 10 QOS Sling Hook 11,00 9,100 6,400 141805³ 1 QOG Grab Hook,900 18,700 1,00 141806³ 1 QOS Sling Hook,900 18,700 1,00 141807³ 1 4 QOG Grab Hook,900 18,700 1,00 141808³ 1 4 QOS Sling Hook,900 18,700 1,00 141809³ 1 6 QOG Grab Hook,900 18,700 1,00 141810³ 1 6 QOS Sling Hook,900 18,700 1,00 141811³ 1 8 QOG Grab Hook,900 18,700 1,00 14181³ 1 8 QOS Sling Hook,900 18,700 1,00 14181³ 1 10 QOG Grab Hook,900 18,700 1,00 141814³ 1 10 QOS Sling Hook,900 18,700 1,00 141815³ 1 QOG Grab Hook 9,000 1,800,500 141816³ 1 QOS Sling Hook 9,000 1,800,500 141817³ 1 4 QOG Grab Hook 9,000 1,800,500 141818³ 1 4 QOS Sling Hook 9,000 1,800,500 141819³ 1 6 QOG Grab Hook 9,000 1,800,500 14180³ 1 6 QOS Sling Hook 9,000 1,800,500 14181³ 1 8 QOG Grab Hook 9,000 1,800,500 1418³ 1 8 QOS Sling Hook 9,000 1,800,500 1418³ 1 10 QOG Grab Hook 9,000 1,800,500 14184³ 1 10 QOS Sling Hook 9,000 1,800,500 14185³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI6
NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Single Oblong Links Both Ends Chain 9/ /8 1/ Reach Usually ships in 1 to weeks Configuration 90 CO,500 1419114³ 1 4 CO,500 1419115³ 1 6 CO,500 1419116³ 1 8 CO,500 1419117³ 1 10 CO,500 1419118³ 1 CO 7,100 141914³ 1 4 CO 7,100 141915³ 1 6 CO 7,100 141916³ 1 8 CO 7,100 141917³ 1 10 CO 7,100 141918³ 1 CO 1,000 141914³ 1 4 CO 1,000 141915³ 1 6 CO 1,000 141916³ 1 8 CO 1,000 141917³ 1 10 CO 1,000 141918³ 1 Single 1 Leg Chain 9/ /8 1/ Usually ships in 1 to weeks Reach Configuration Hook Type 90 SOG Grab Hook,500 1419084³ 1 SOS Sling Hook,500 1419079³ 1 4 SOG Grab Hook,500 1419085³ 1 4 SOS Sling Hook,500 1419080³ 1 6 SOG Grab Hook,500 1419086³ 1 6 SOS Sling Hook,500 1419081³ 1 8 SOG Grab Hook,500 1419087³ 1 8 SOS Sling Hook,500 141908³ 1 10 SOG Grab Hook,500 1419088³ 1 10 SOS Sling Hook,500 141908³ 1 SOG Grab Hook 7,100 1419184³ 1 SOS Sling Hook 7,100 1419179³ 1 4 SOG Grab Hook 7,100 1419185³ 1 4 SOS Sling Hook 7,100 1419180³ 1 6 SOG Grab Hook 7,100 1419186³ 1 6 SOS Sling Hook 7,100 1419181³ 1 8 SOG Grab Hook 7,100 1419187³ 1 8 SOS Sling Hook 7,100 141918³ 1 10 SOG Grab Hook 7,100 1419188³ 1 10 SOS Sling Hook 7,100 141918³ 1 SOG Grab Hook 1,000 141984³ 1 SOS Sling Hook 1,000 141979³ 1 4 SOG Grab Hook 1,000 141985³ 1 4 SOS Sling Hook 1,000 141980³ 1 6 SOG Grab Hook 1,000 141986³ 1 6 SOS Sling Hook 1,000 141981³ 1 8 SOG Grab Hook 1,000 141987³ 1 8 SOS Sling Hook 1,000 14198³ 1 10 SOG Grab Hook 1,000 141988³ 1 10 SOS Sling Hook 1,000 14198³ 1 NI64 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Single Hooks Both Ends Chain 9/ /8 1/ Reach Configuration Hook Type 90 SGG Grab Hooks,500 1419099³ 1 SSG Sling Hook & Grab Hook,500 1419094³ 1 SSS Sling Hooks,500 1419089³ 1 4 SGG Grab Hooks,500 1419100³ 1 4 SSG Sling Hook & Grab Hook,500 1419095³ 1 4 SSS Sling Hooks,500 1419090³ 1 6 SGG Grab Hooks,500 1419101³ 1 6 SSG Sling Hook & Grab Hook,500 1419096³ 1 6 SSS Sling Hooks,500 1419091³ 1 8 SGG Grab Hooks,500 141910³ 1 8 SSG Sling Hook & Grab Hook,500 1419097³ 1 8 SSS Sling Hooks,500 141909³ 1 10 SGG Grab Hooks,500 141910³ 1 10 SSG Sling Hook & Grab Hook,500 1419098³ 1 10 SSS Sling Hooks,500 141909³ 1 SGG Grab Hooks 7,100 1419199³ 1 SSG Sling Hook & Grab Hook 7,100 1419194³ 1 SSS Sling Hooks 7,100 1419189³ 1 4 SGG Grab Hooks 7,100 141900³ 1 4 SSG Sling Hook & Grab Hook 7,100 1419195³ 1 4 SSS Sling Hooks 7,100 1419190³ 1 6 SGG Grab Hooks 7,100 141901³ 1 6 SSG Sling Hook & Grab Hook 7,100 1419196³ 1 6 SSS Sling Hooks 7,100 1419191³ 1 8 SGG Grab Hooks 7,100 14190³ 1 8 SSG Sling Hook & Grab Hook 7,100 1419197³ 1 8 SSS Sling Hooks 7,100 141919³ 1 10 SGG Grab Hooks 7,100 14190³ 1 10 SSG Sling Hook & Grab Hook 7,100 1419198³ 1 10 SSS Sling Hooks 7,100 141919³ 1 SGG Grab Hooks 1,000 141999³ 1 SSG Sling Hook & Grab Hook 1,000 141994³ 1 SSS Sling Hooks 1,000 141989³ 1 4 SGG Grab Hooks 1,000 141900³ 1 4 SSG Sling Hook & Grab Hook 1,000 141995³ 1 4 SSS Sling Hooks 1,000 141990³ 1 6 SGG Grab Hooks 1,000 141901³ 1 6 SSG Sling Hook & Grab Hook 1,000 141996³ 1 6 SSS Sling Hooks 1,000 141991³ 1 8 SGG Grab Hooks 1,000 14190³ 1 8 SSG Sling Hook & Grab Hook 1,000 141997³ 1 8 SSS Sling Hooks 1,000 14199³ 1 10 SGG Grab Hooks 1,000 14190³ 1 10 SSG Sling Hook & Grab Hook 1,000 141998³ 1 10 SSS Sling Hooks 1,000 14199³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI65
NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Double Legs Chain 9/ /8 1/ Reach Configuration Hook Type 60 45 0 DOG Grab Hook 6,100 4,900,500 141914³ 1 DOS Sling Hook 6,100 4,900,500 1419119³ 1 4 DOG Grab Hook 6,100 4,900,500 141915³ 1 4 DOS Sling Hook 6,100 4,900,500 141910³ 1 6 DOG Grab Hook 6,100 4,900,500 141916³ 1 6 DOS Sling Hook 6,100 4,900,500 141911³ 1 8 DOG Grab Hook 6,100 4,900,500 141917³ 1 8 DOS Sling Hook 6,100 4,900,500 14191³ 1 10 DOG Grab Hook 6,100 4,900,500 141918³ 1 10 DOS Sling Hook 6,100 4,900,500 14191³ 1 DOG Grab Hook 1,00 10,000 7,100 14194³ 1 DOS Sling Hook 1,00 10,000 7,100 141919³ 1 4 DOG Grab Hook 1,00 10,000 7,100 14195³ 1 4 DOS Sling Hook 1,00 10,000 7,100 14190³ 1 6 DOG Grab Hook 1,00 10,000 7,100 14196³ 1 6 DOS Sling Hook 1,00 10,000 7,100 14191³ 1 8 DOG Grab Hook 1,00 10,000 7,100 14197³ 1 8 DOS Sling Hook 1,00 10,000 7,100 1419³ 1 10 DOG Grab Hook 1,00 10,000 7,100 14198³ 1 10 DOS Sling Hook 1,00 10,000 7,100 1419³ 1 DOG Grab Hook 0,800 17,000 1,000 14194³ 1 DOS Sling Hook 0,800 17,000 1,000 141919³ 1 4 DOG Grab Hook 0,800 17,000 1,000 14195³ 1 4 DOS Sling Hook 0,800 17,000 1,000 14190³ 1 6 DOG Grab Hook 0,800 17,000 1,000 14196³ 1 6 DOS Sling Hook 0,800 17,000 1,000 14191³ 1 8 DOG Grab Hook 0,800 17,000 1,000 14197³ 1 8 DOS Sling Hook 0,800 17,000 1,000 1419³ 1 10 DOG Grab Hook 0,800 17,000 1,000 14198³ 1 10 DOS Sling Hook 0,800 17,000 1,000 1419³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook NI66 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Triple Legs Chain 9/ /8 1/ Reach Configuration Hook Type 60 45 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. 0 TOG Grab Hook 9,100 7,400 5,00 1419144³ 1 TOS Sling Hook 9,100 7,400 5,00 141919³ 1 4 TOG Grab Hook 9,100 7,400 5,00 1419145³ 1 4 TOS Sling Hook 9,100 7,400 5,00 1419140³ 1 6 TOG Grab Hook 9,100 7,400 5,00 1419146³ 1 6 TOS Sling Hook 9,100 7,400 5,00 1419141³ 1 8 TOG Grab Hook 9,100 7,400 5,00 1419147³ 1 8 TOS Sling Hook 9,100 7,400 5,00 141914³ 1 10 TOG Grab Hook 9,100 7,400 5,00 1419148³ 1 10 TOS Sling Hook 9,100 7,400 5,00 141914³ 1 TOG Grab Hook 18,400 15,100 10,600 141944³ 1 TOS Sling Hook 18,400 15,100 10,600 14199³ 1 4 TOG Grab Hook 18,400 15,100 10,600 141945³ 1 4 TOS Sling Hook 18,400 15,100 10,600 141940³ 1 6 TOG Grab Hook 18,400 15,100 10,600 141946³ 1 6 TOS Sling Hook 18,400 15,100 10,600 141941³ 1 8 TOG Grab Hook 18,400 15,100 10,600 141947³ 1 8 TOS Sling Hook 18,400 15,100 10,600 14194³ 1 10 TOG Grab Hook 18,400 15,100 10,600 141948³ 1 10 TOS Sling Hook 18,400 15,100 10,600 14194³ 1 TOG Grab Hook 1,00 5,500 18,000 141944³ 1 TOS Sling Hook 1,00 5,500 18,000 14199³ 1 4 TOG Grab Hook 1,00 5,500 18,000 141945³ 1 4 TOS Sling Hook 1,00 5,500 18,000 141940³ 1 6 TOG Grab Hook 1,00 5,500 18,000 141946³ 1 6 TOS Sling Hook 1,00 5,500 18,000 141941³ 1 8 TOG Grab Hook 1,00 5,500 18,000 141947³ 1 8 TOS Sling Hook 1,00 5,500 18,000 14194³ 1 10 TOG Grab Hook 1,00 5,500 18,000 141948³ 1 10 TOS Sling Hook 1,00 5,500 18,000 14194³ 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI67
NEW s Grade 80 Chain Slings An identification tag is affixed to each sling and lists the following information: Grade Reach Serial Number Number of Legs at stated angle American National Standard ANSI B0.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety and Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting. Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Quad 4 Legs Chain 9/ /8 1/ Reach Configuration Hook Type Rated Capacity: 60 Rated Capacity: 45 Rated Capacity: 0 QOG Grab Hook 9,100 7,400 5,00 1419164³ 1 QOS Sling Hook 9,100 7,400 5,00 1419159³ 1 4 QOG Grab Hook 9,100 7,400 5,00 1419165³ 1 4 QOS Sling Hook 9,100 7,400 5,00 1419160³ 1 6 QOG Grab Hook 9,100 7,400 5,00 1419166³ 1 6 QOS Sling Hook 9,100 7,400 5,00 1419161³ 1 8 QOG Grab Hook 9,100 7,400 5,00 1419167³ 1 8 QOS Sling Hook 9,100 7,400 5,00 141916³ 1 10 QOG Grab Hook 9,100 7,400 5,00 1419168³ 1 10 QOS Sling Hook 9,100 7,400 5,00 141916³ 1 QOG Grab Hook 18,400 15,100 10,600 141964³ 1 QOS Sling Hook 18,400 15,100 10,600 141959³ 1 4 QOG Grab Hook 18,400 15,100 10,600 141965³ 1 4 QOS Sling Hook 18,400 15,100 10,600 141960³ 1 6 QOG Grab Hook 18,400 15,100 10,600 141966³ 1 6 QOS Sling Hook 18,400 15,100 10,600 141961³ 1 8 QOG Grab Hook 18,400 15,100 10,600 141967³ 1 8 QOS Sling Hook 18,400 15,100 10,600 14196³ 1 10 QOG Grab Hook 18,400 15,100 10,600 141968³ 1 10 QOS Sling Hook 18,400 15,100 10,600 14196³ 1 QOG Grab Hook 1,00 5,500 18,000 141964³ 1 QOS Sling Hook 1,00 5,500 18,000 141959³ 1 4 QOG Grab Hook 1,00 5,500 18,000 141965³ 1 4 QOS Sling Hook 1,00 5,500 18,000 141960³ 1 6 QOG Grab Hook 1,00 5,500 18,000 141966³ 1 6 QOS Sling Hook 1,00 5,500 18,000 141961³ 1 8 QOG Grab Hook 1,00 5,500 18,000 141967³ 1 8 QOS Sling Hook 1,00 5,500 18,000 14196³ 1 10 QOG Grab Hook 1,00 5,500 18,000 141968³ 1 10 QOS Sling Hook 1,00 5,500 18,000 14196³ 1 Usually ships in 1 to weeks Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases. Slings should not be used at angles of less than 0. s are made-to-order and are non-returnable. Chain Sling Configuration Key First Symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end D Double branch chain sling ( legs) T Triple branch chain sling ( legs) Q Quad branch chain sling (4 legs) Second Symbol (type of master link or end link) O Oblong master link Third Symbol (type of hook) S Sling hook G Grab hook F Foundry hook L Latchlok hook NI68 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Load Hugger Tiedown Assemblies Meet all DOT and CVSA requirements Flexible conforms to and controls the load Cam Style Ultimate Strength Hook Type 1 10 1,000 0 S-Hook, Coated 5756 1 Ratchet Style 968 9007 9008 68 Ultimate Strength Working Load Limit Hook Type 1 1,100 700 Hook & Keeper 968 1 1 685 57561 5756 15 5,000 1,600 Flat Hook 9007 1 0 5,000 1,600 Flat Hook 9008 1 0 5,000 1,600 U-Hook 68 1 0 10,000,00 Flat Hook 685 1 10,100 700 S-Hook, Coated 57561 1 15,100 700 S-Hook, Coated 5756 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI69
NEW s Load Hugger Tiedown Assemblies Meet all DOT and CVSA requirements Flexible conforms to and controls the load Ratchet Style Series 5,000 9009 141747² 141750² 141751² 684 141759² 14176² 14176² Ultimate Strength Hook Type 7 5,000 1,600 Flat Hook 9009 1 0 5,000 1,600 Flat Hook 141747² 1 7 5,000 1,600 Stamped Snap Hook 141750² 1 0 5,000 1,600 Stamped Snap Hook 141751² 1 7 5,000 1,600 U-Hook 684 1 0 5,000 1,600 U-Hook 141759² 1 7 5,000 1,600 Endless 14176² 1 0 5,000 1,600 Endless 14176² 1 Ratchet Style Series 10,000 686 14178 141786² 141787² 14179² 14179² 141796 141797² Ultimate Strength Hook Type 7 10,000,00 Flat Hook 686 1 0 10,000,00 Flat Hook 14178 1 7 10,000,00 Stamped Snap Hook 141786² 1 0 10,000,00 Stamped Snap Hook 141787² 1 7 10,000,00 Endless 14179² 1 0 10,000,00 Endless 14179² 1 7 10,000,00 U-Hook 141796 1 0 10,000,00 U-Hook 141797² 1 NI70 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com
NEW s Load Hugger Tiedown Assemblies Winch Assemblies 964 141771² 141774² 141775² 141778² 141779² 14178² 14178² Meet all DOT and CVSA requirements Flexible conforms to and controls the load For use with weld-on or portable winches 4 Ultimate Strength Hook Type 7 15,000 5,000 Flat Hook 964 1 0 15,000 5,000 Flat Hook 141771² 1 7 15,000 5,000 Triangle 141774² 1 0 15,000 5,000 Triangle 141775² 1 7 15,000 5,000 Chain Grab Hook 141778² 1 0 15,000 5,000 Chain Grab Hook 141779² 1 7 15,000 5,000 Chain Anchor 14178² 1 0 15,000 5,000 Chain Anchor 14178² 1 Winches Winch Bar 6" long, chrome-plated steel bar with knurled handle and tapered end Use on winches to tighten and release winch straps 967 1 Meet all DOT and CVSA requirements 4" slot to accept web up to 4" wide Use winch bar to tighten and release Style 965 1417419² Winch Tightening Bar Portable 967 965 1 Weld-On 1417419² 1 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com NI71
NEW s Load Hugger E-Track Assemblies Ratchet Style Tuff-Edge Meet all DOT and CVSA requirements Flexible conforms to and controls the load Secures products inside vans or trailers Color Ultimate Strength Working Load Limit 1 Yellow,000 1,000 6840 1 0 Blue,000 1,000 684 1 Aids in removing vehicles stuck in snow, mud, sand and ditches. Made from strong durable sling webbing with attaching eyes on each end. The elastic effect of the webbing helps absorb shock and contraction aids in the vehicle recovery. Safer than chain or wire rope Shock absorbing to reduce chance of vehicle damage Light weight and flexible for easy use and storage Tuflex Aids in removing vehicles stuck in snow, mud, sand and ditches. Made from strong durable Tuflex roundslings. Body and attaching eyes are covered with additional abrasion resistant fabric for extra protection. The elastic effect of the polyester helps absorb shock and contraction aids in the vehicle recovery. Safer than chain or wire rope Shock absorbing to reduce chance of vehicle damage Light weight and flexible for easy use and storage Towing Capacity Assembly Breaking Strength Ply 5,00 16,000 0 1 141744 1 16,000 0 1 141745² 1 8,000 4,000 0 1 141746² 1 4,000 0 1 141747² 1 10,600,000 0 4 1 141748² 1,000 0 4 1 141749² 1 16,000 48,000 0 6 1 1417440² 1 48,000 0 6 1 1417441² 1 10,700,000 0 141744² 1,000 0 141744 1 14,00 4,000 0 1417444² 1 4,000 0 1417445² 1 19,100 57,500 0 4 1417446² 1 57,500 0 4 1417447² 1 7,100 81,500 0 6 1417448² 1 81,500 0 6 1417449² 1 Towing Capacity 14,000 17,500,000 8,000 5,00 51,600 8,00 110,000 150,000 Assembly Breaking Strength Color 4,000 0 Yellow 141746² 1 4,000 0 Yellow 141746² 1 5,500 0 Tan 1417464² 1 5,500 0 Tan 1417465² 1 66,000 0 Red 1417466² 1 66,000 0 Red 1417467² 1 84,000 0 White 1417468² 1 84,000 0 White 1417469² 1 105,900 0 Blue 1417470² 1 105,900 0 Blue 1417471² 1 154,800 0 Grey 141747² 1 154,800 0 Grey 141747² 1 49,900 0 Brown 1417474² 1 49,900 0 Brown 1417475² 1 0,000 0 Olive 1417476² 1 0,000 0 Olive 1417477² 1 450,000 0 Black 1417478² 1 450,000 0 Black 1417479² 1 NI7 USA: 888.YES.KENT (888.97.568) Canada: 800.56.1717 kent-automotive.com