Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber, green, blue and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles U file E63363 CSA file 1279633 / R29381 1 Approvals shown for neon versions only ERM YPE PANE & C IUMINAION B 2.8 (C) 0566 A 6.0 2.0max 200.0 12.0 23.7 2.7 Ø7.0 B 2.8 (C) 0566 B 6.0 2.0max 200.0 12.0 23.7 2.3 Ø7.0 B 2.8 (C) 0566 C 6.0 2.0max 200.0 12.0 23.7 1.0 Ø7.0 (C) 0145 AA 5.8 3.0max 0.9 14.0 32.5 1.5 Ø6.7 W () 1041 OO 6.3 6.3max 10.2 4.3 Ø7.6 () 1045 OO available 6.3 W max 22.6 4.3 Ø7.6 70
ERM YPE PANE & C IUMINAION () 0245 OO available 7.1 W 6.3max 22.5 4.2 Ø7.6 2950 OO available 12.6 0.8-1.6 Ø9.0 1 27.0 3.9 Ø7.5 () 0195 BB 0.8-3.0 Ø9.5 1 12.5 13.7 7.9 11.0 Ø9.5 2951 OO 3.7 0.8-1.6 Ø9.8 27.0 8.5 Ø7.5 4 (H) 0568 A(*) Deep lens profile 1 (VDE at 100) 0.8-3.5 27.5 3.0 13.0 9.5 Ø 27.5 *Final suffix (X) - ong barrier *Final suffix (Y) - Short barrier *Final suffix (W) - For Wires (H) 0568 B(*) Shallow lens profile 1 (VDE at 100) 0.8-3.5 2.3 13.0 9.5 27.5 Ø9.5 27.5 *Final suffix (X) - ong barrier *Final suffix (Y) - Short barrier *Final suffix (W) - For Wires 71
Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber, green, blue and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles U file E63363 CSA file 1279633 / R29381 1 Approvals shown for neon versions only ERM YPE PANE & C IUMINAION () 0569 AW 9.0 19.0 3.0 0.8-2.5 1 Call sales 23.0 8.5 12.0 max Ø (C) 0273 OO 9.0 2.0 max 32.8 3.1 Ø12.2 33.5 (C) 0278 OO 9.0 2.0 max 22.3 23.5 3.5 12.0 Sq. 23.5 (C) 0276 AA 9.5 0.8-2.8 4.0 33.0 Ø12.0 33.7 (C) 0275 OO 16.0 12.0 max 32.5 3.0 Ø13.3 (C) 0275 OO 11.5 max 32.7 16.0 32.0 32.5 32.7 Ø13.3 3.5 3.0 Ø15.6 72
ERM YPE PANE & C IUMINAION (C) 0276 OO (C) 0276 OO 2.8 max 4.0 33.0 Ø12.0 33.7 (C) 0277 OO 14.9 (C) 0277 OO 12.0 max 53.7 3.3 8.3 Ø14.6 (C) 0273 32.2 For sub-panel mounting, behind a facia. 0.6-2.0 18.4 16.6 Ø8.8 35.7 (C) 2820 OO 12.0 (C) 2821 OO 0.75-2.0 12.0 or 22.8 5.0 Ø13.6 ø12.0 = 0.8-2.5 ø = 1.1-2.5 22.8 1.6 Ø14.5 (C) 0586 OO 12.5 0.8-1.5 25.1 1.8 15.5 Sq 73
Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber, green and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles U file E63363 CSA file 1317844 / 1279633 1 Approvals shown for neon versions only ERM YPE PANE & C IUMINAION (C) 2870 OO 0.75-2.0 9.9 22.8 5.0 Ø13.6 (C) 0589 OO 0.8-1.5 10.5 21.6 3.2 Ø15.9 0081 OO 9.5 Ø16.0 1 1 11.4 Ø18.3 (C) 0177 OO 14.9 12.0max 53.7 3.3 8.3 Ø14.6 (C) 0067 OO 32.2 1 1.14max 38.1 5.1 Ø16.0 (C) 0180AA 19.0max 10.4 22.3 5.1 Ø15.0 Starlock fixing 21.3 1.3 74
ERM YPE PANE & C IUMINAION (C) 0180BB 13.5 0.9-1.14 10.4 22.3 5.1 Ø16.3 (C) 0579 OO 14.0 2.5max 25.4 3.2 Ø15.9 (C) 1092 19.0 4.0max 28.5 12.5 Ø22.9 max 75
Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber, green and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles U file E63363 CSA file 1317844 / 1279633 1 Approvals shown for neon versions only ERM YPE PANE & C IUMINAION H 0581 AY 18.2/18.3 x 6.2/6.3* 1 20.0 2.0-3.5 9.0 19.0 2.0 6.0 (C) 0196 AA 13.0x6.5 30.2 0.8-3.0 23.5 14.6 25.1 10.7 8.5 0234 OO 9.27/9.50 x 4.75* 4.3 3.3 11.0 77 0.71-1.62 9.0 1 0233 OO 11.3 26.3 32.3 M1068 60.0 Ø6.4 Red & Amber Neon tube, resistor and flexible lead assembly, protected by shrunk on transparent sleeving. 76
Indicator ights o match 8500, 8600, R13, 1500, 1550, 5500, 6000, 8300 and 7000 switches Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) Filament lamp Available with Red, Amber or Green lenses 6V, 12/14V, 24/28V Mains ED 6030 only Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon or filament lamp. Indicator lights Neon or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber green and clear neons Red, amber and green filament lamps Styles to match rocker and push switches U file E63363 CSA file R29381 Approvals shown for neon versions only ERM YPE H8580 AB Full product details on pages 14-15 Cut-out Flange Body Panel Cut-out Code thickness X Y B 0.75-1.25 19.1/19.2 12.9/13.0 1.25-2.0 19.3/19.4 12.9/13.0 2.0-3.0 19.7/19.8 12.9/13.0 Y X 21.0 15.0 X H8630 FB Full product details on pages 16-17 Cut-out Flange Body Panel Cut-out Code thickness X Y B 0.75-1.25 19.1/19.2 12.9/13.0 1.25-2.0 19.3/19.4 12.9/13.0 2.0-3.0 19.7/19.8 12.9/13.0 Y X 21.0 15.0 R9 92B Full product details on pages 34 Cut-out Flange Snap fixing in panels thickness up to 3.0 2.2 Approvals details - contact sales Ø20.2 0.9 Ø23.0 U U C0430 A C0480 A C6030 A 6030 - body & C terminals only Full product details on pages 20-21 & 24-25 Body Cut-out Flange Code Y X Y X A 12.2/12.3 27.2/27.3 14.0 30.2 B 11.0/11.1 30.0/30.1 14.0 33.4 11.0/11.1 30.0/30.1 14.0 31.9 R 14.0/14.1 28.5/28.6 17.0 31.5 11.5/11.6 28.2/28.3 14.0 30.2 Full product details on pages 28-29 Body Cut-out Flange Code Y X Y X A 22.3/22.4 27.2/27.3 25.0 30.2 B 22.1/ 30.0/30.1 25.0 33.4 22.1/ 30.0/30.1 25.0 32.0 R 23.0/25.4 28.4/28.5 28.9 33.2 22.3/22.4 28.2/28.3 25.0 30.2 Cut-out Y Cut-out Y X X Flange Y Flange Y X X C7030 AH Full product details on pages 44-45 Cut-out Flange Body Cut-out Flange Code H Ø25.0/25.2 Ø2 25.0/25.2 Ø2 77
ow Voltage ampholders Colour and voltage: hese lampholders are suitable for up to 50V max. Bulbs will be supplied (dependent on order quantity) if a voltage is specified. Colours - Red, Amber, Green, (Clear & Blue, check availability). Up to 50V Red, Amber, Green, Blue and Clear inestra/philinea lamp holder Refer to the 2 columns below (terminal and type), then state: ens colour and voltage. ERM YPE PANE & C 0061 AO (ES) 9.5 0.9-1.14 6.3 23.7 4.8 Ø Rear of panel bulb replacement 6 C0067 OO (BA7s) 1.14max 44.5 5.1 Rear of panel bulb replacement Ø16.0 0062 AO (Midget flange) 9.6max 0063 AO (ES) 21.3 9.1 Ø14.7 Front of panel bulb replacement 0062 MO (Midget flange) 9.6max S 0063 MO (ES) S0095 OO 21.3 9.1 Ø14.7 Front of panel bulb replacement amp 4.7mm CS Hole Holders 38.1 13.5 17.5 33.3 25.4 Paired Architectural lampholders for inestra or Philinea lamp. 78
ow Voltage ampholders Up to 50V MES or MBC bulb Flat and domed lens Brass or nylon bodies Red, Amber, Green, Blue and Clear lenses Bulbs will be supplied (dependant on order quantity) if a voltage is specified. hese lampholders are suitable for up to 50V max. Colours - Red, Amber, Green, (Clear & Blue, check availability). Brass bodies have polished chrome finish. For Neon & Mains versions see page 75 For Sealed version see page 84 C1090FP - - - C 1090 F A - - - ERMINA AMP CAP ENS BODY VOAGE, COOUR, EC ERMINA AMP CAP ENS HREADED BODY DIMENSIONS mm C 1090 MES (E10) F Flat 1090 (MES lamps) Panel Body Dim. Dim. Hole Dia. Material A B B A 19.0 Brass 35.0 22.0 D 19.0 Brass 30.2 22.0 A E 19.0 Nylon 30.2 22.0 with chrome bezel 30.2 22.8 6.3 x 0.8 9.1 1091 MBC (BA9s) V Domed G 19.0 Brass 24.6 22.0 H 19.0 Nylon 24.6 22.0 with chrome bezel 24.6 22.8 25.4 Brass 26.0 31.5 1091 (MBC lamps) F0445 MO P.V.C. Insulating terminal cover. No lens Panel Body Dim. Dim. Hole Dia. Material A B B 19.0 Brass 36.0 22.0 C 19.0 Nylon 36.6 22.0 Q 19.0 Nylon 36.6 22.8 (+ chrome trim) M 25.4 Brass 38.1 31.5 Panel thickness 5.0, except A type body 79
ED amps and ED ampholders ED ampholders can be supplied with or without EDs Colours: Voltages: Red, Yellow, Green and Blue EDs (High Intensity is standard. Option of extra super bright). EDs are available for direct connection to 2.0/2.2V or 12Vdc For other voltages contact sales. ED lampholders Supplied with or without EDs Black or Chrome finish Refer to the 2 columns below (terminal and type), then state: ED colour and voltage and body finish (Black or Chrome). ERM YPE PANE & C W ED A ED not (W) 1047 OO 6.3 ED & Wires 3mm ED 6.3max 13.9 1.5 Ø7.6 W ED A ED not () 1048 OO ED & Wires 5mm ED 5.5max 14.5 2.0 Ø9.5 W ED A ED not (W) 1050 OO ED & Wires 5mm ED with focusing reflector 7.0max 12.4 16.9 2.9 Ø W ED () 1035 0A 4.5 20.0 1.0 4.30 ED & Wires 0.9-1.6 200.0 1.50 5.08 W ED () 1036 0A 6.0 5.85 20.0 1.0 ED & Wires 0.9-1.6 200.0 4.0 7.9 W ED () 1037 0A 6.35 20.0 1.0 6.15 ED & Wires 0.9-1.6 200.0 4.0 7.9 80
Neon & ED Indicator ights Sealed to IP52 and IP54 Colours and voltages: Neon Red, Amber, Green 120 or 230Vac 0.5W - please specify (Red base) ED Red, Amber, Green 28Vac/dc 1W (Green base) Neon versions feature integral current limiting & ghost lighting resistors. ED versions have rectifier diodes & resistors for direct connection to 28Vac/dc. o order Select a number from the type column, then state: ens colour, voltage and whether neon or ED. All versions have recessed screw terminals. IP52 is standard. A panel sealing washer is available for IP54. IP52 and IP54 sealing hree bezel sizes: 1, 20.5 and 30.0 diameter Neon or ED indicator Black and satin chrome bezel or without bezel Recessed screw terminals Approval shown for neon versions only ERM YPE PANE & C Recessed Screw 3130 No bezel 13.2 max Ø13.0 120 neon 50 ED 36.0 9.0 Ø1 Recessed Screw 3160 Black bezel 16.2 45.0 5.0max Ø16.0 120 neon 50 ED 2.0 34.0 4.0 Ø20.5 Recessed Screw 3161 Satin chrome style bezel 16.2 45.0 5.0max Ø16.0 55 neon 50 ED 2.0 34.0 4.0 Ø20.5 Recessed Screw 3221 arge black bezel 22.3 45.0 4.5max Ø22.0 120 neon 50 ED 14.0 3 2.0 Ø30.0 Select the version most suitable for your application from the 4 types shown. Or call sales for availability to your special requirements. 81
Indicator ights - Sealed to IP67 Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White 110-230V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp IP67 Panel Sealing Supplied complete with gaskets/ O rings Neon, ED, mains ED or filament lamp Bezel sizes from 7.6 to 22.9mm diameter Red, amber, green, blue and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles SEMKO and U approvals applied for ERM YPE PANE IUMINAION () 1041 OS 6.3 5.3 max 9.9 4.5 Ø9.5 () 0245 OS 7.1 4.6 max 4.5 Ø9.5 (C) 0275 OS 15.5 11.5 max 32.0 3.5 Ø15.6 32.2 (C) 0277 OS 14.9 11.5 max 53.7 3.3 8.3 Ø14.6 (C) 0177 OS 11.5 max 32.2 14.9 3.3 53.7 8.3 Ø14.6 32.2 (C) 1092 FFS 19.0 4.0 max 28.5 12.5 Ø22.9 max 82
Colours: Voltages: ED amps and ED ampholders - Sealed to IP67 Red, Yellow Green and Blue EDs. (High Intensity is standard. Option of extra super bright). EDs are available for direct connection to 2.0/2.2V or 12Vdc. For other voltages contact sales. IP67 front bezel sealing ED lampholders Supplied with or without EDs Black or Chrome finish ED ampholders can be supplied with or without EDs Refer to the 2 columns below (terminal and type), then state: ED colour and voltage and body finish (Black or Chrome). ERM YPE PANE & C W ED (W) 1048 OA Designed to IP67 1.0 A ED not 5mm ED 5.5max 11.0 15.5 2.0 Ø 9.5 1048 OA Designed to IP67 1.0 ED & Wires 5mm ED 5.5max 11.0 15.5 2.0 Ø 9.5 W ED (W) 1050 OA Designed to IP67 1.0 A ED not 5mm ED with focusing reflector 7.0max 13.4 17.9 2.9 Ø 1050 OA Designed to IP67 1.0 ED & Wires Properties 5mm ED with focusing reflector Sealing O-ring sealing equivalent to IP67, of both the ED to bezel, and bezel to panel is available where shown. 7.0max 13.4 17.9 ED wires or PVC covered wire leads 125mm min length wires, 6.3mm standard strip. Alternative colours, length and strip available. 2.9 Ø Polarity he nylon base mouldings are polarity marked. Body Material and Finish Chromed brass or Black oxide coated brass. ampholders only Items prefixed A are supplied without EDs. 83
ow Voltage ampholders - Sealed to IP67 Colour and voltage: hese lampholders are suitable for up to 50V max. Bulbs will be supplied (dependent on order quantity) if a voltage is specified. Colours - Red, Amber, Green, (Clear & Blue, check availability). Refer to the 2 columns below (terminal and type), then state: ens colour and voltage. IP67 Panel seal Supplied complete with gaskets/ O rings Up to 50V Red, Amber, Green, Blue and Clear ES, Midget Flange, MES & MBC bulb ERM YPE PANE & C IUMINAION C1090 FPS (MES) 19.0 4.0 max Front of panel bulb replacement 30.2 12.5 max C1091 FQS (MBC) 19.0 4.0 max Front of panel bulb replacement 35.0 12.5 max 0062 AOS (Midget flange) 8.5 max 0063 AOS (ES) 21.3 9.5 Ø14.7 0062 MOS (ES & Midget flange) 8.5 max 0063 MOS (ES) 21.3 9.1 Ø14.7 F0445 MO P.V.C. Insulating terminal cover. For use with C1090 & C1091 84