Fiberspar Line Pipe (High Pressure - Product Data) OIL & GAS MINING Applications Pipeline Rehabilitation Production Lines or Injection Lines Transfer Lines or Disposal Lines Oil, Gas, Saltwater CO 2 and Sour Services Product Description Sizes - 2 through 6½ inches Pressure - Up to 3,500 psi (24,1 MPa) E = High - density polyethylene (HDPE) to 140 F (60 C) X = High - temperature polyethylene to 180 F (82 C) XT = High - temperature polyethylene to 203 F (95 C) Structual Resin System - Anhydride Cured Epoxy Reinforcement - Premium Fiberglass (E-Glass) Joining Systems - Compression Slip Connectors Joint Length - Up to 9,000 Ft High Pressure Design (> 500 psi per API 15HR & 15S) Design Life - 20 years at full rating Hoop Stress - 95% Lower Confidence Limit (LCL of Long Term Hydrostatic Strength according to ASTM D2992-B - 32,600 psi. Design Stress - 21,840 psi. All products are factory hydro tested to 1.5 times the maximum pressure design Recommended field test pressure is 1.1 to 1.25 times the maximum operating pressure Benefits Corrosion Control Reduced Installation Costs Improved Flow Efficiency Reduced Paraffin & Scale Build-Up Reduced Maintenance Cost Joining System Weld Prep - Suitable for welding to existing steel lines Welded on Flange - 300, 600 or 1500 Series ANSI Flanges (shown above). Other standard flange drillings available for special order Threaded - NPT or 8 Round EUE pin or box or API Line Pipe Thread Custom end-preps are available on request Fiberspar Connectors are available in: Carbon Steel with Electro less Nickel Coated (ENC) per ASTM B733 Coated Carbon Steel with Stainless Steel wetted surface (Pipe to Pipe only) 316L SS Stainless Steel Other Corrosion Resistant Alloys (CRA) available upon request All Carbon Steel connectors are coated for corrosion protection suitable for harsh oilfield environments View of Joint Illustrations Pipe-to-Pipe Connector Service-End Connector
2 Fiberspar Line Pipe High Pressure Product Data E Series Series 500 500 psi (3,4 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 5 500 (E) 4.52 115 5.24 133 0.056 1,4 2.67 3,97 131 333 5483 2487 2250 (C) 686 3 FS LPS 6 500 (E) 5.00 127 5.77 147 0.062 1,6 3.18 4,73 144 366 6704 3041 1800 (C) 549 3 FS LPS 6 ½ 500 (E) 5.60 142 6.45 164 0.070 1,8 3.92 5,83 161 409 8417 3818 600 (C) 183 3 s per Series 750 750 psi (5,2 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 3 750 (E) 2.82 72 3.37 86 0.057 1,4 1.35 2,01 84 213 3474 1576 6000 (B) 1829 3 FS LPS 4 750 (E) 3.75 95 4.41 112 0.070 1,8 2.16 3,21 110 279 5702 2586 4500 (C) 1373 2 FS LPS 5 750 (E) 4.52 115 5.31 135 0.088 2,2 3.13 4,66 133 338 8671 3933 2250 (C) 686 3 FS LPS 6 750 (E) 5.00 127 5.83 148 0.091 2,3 3.63 5,40 146 371 9947 4512 1800 (C) 549 3 FS LPS 6 ½ 750 (E) 5.60 142 6.51 165 0.102 2,6 4.48 6,67 163 414 12418 5633 600 (C) 183 3 s per Series 1100 1100 psi (7,9 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,100 (E) 1.89 48 2.37 60 0.064 1,6 0.85 1,26 59 150 2659 1206 9000 (A) 2743 3 FS LPS 2 ½ 1,100 (E) 2.37 60 2.90 74 0.067 1,7 1.14 1,70 72 183 3487 1582 9000 (B) 2743 3 FS LPS 3 1,100 (E) 2.82 72 3.42 87 0.081 2,1 1.57 2,34 85 216 4987 2262 6000 (B) 1829 3 FS LPS 3 ½ 1,100 (E) 3.33 84 4.00 102 0.092 2,3 2.07 3,08 100 254 6713 3045 4500 (B) 1372 3 FS LPS 4 1,100 (E) 3.75 95 4.49 114 0.103 2,6 2.54 3,78 112 284 8456 3836 4500 (C) 1372 2 FS LPS 5 1,100 (E) 4.52 115 5.39 137 0.123 3,1 3.62 5,39 134 340 12152 5512 2250 (C) 686 2 FS LPS 6 1,100 (E) 5.00 127 5.94 151 0.136 3,5 4.34 6,46 148 376 14902 6759 1680 (C) 512 3 FS LPS 6 ½ 1,100 (E) 5.60 142 6.63 168 0.152 3,9 5.35 7,96 165 419 18590 8432 600 (C) 183 3 Series 1500 1500 psi (10,3 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,500 (E) 1.89 48 2.38 61 0.071 1,8 0.90 1,34 60 152 2983 1353 9000 (A) 2743 3 FS LPS 2 ½ 1,500 (E) 2.37 60 2.95 75 0.094 2,4 1.36 2,02 74 188 4969 2254 9000 (B) 2743 2 FS LPS 3 1,500 (E) 2.82 72 3.46 88 0.104 2,6 1.78 2,65 87 221 6458 2929 4500 (A) 1372 3 FS LPS 3 ½ 1,500 (E) 3.33 84 4.05 103 0.122 3,1 2.39 3,56 101 257 8935 4053 4500 (B) 1372 2 FS LPS 4 1,500 (E) 3.75 95 4.55 115 0.138 3,5 2.97 4,42 114 290 11424 5182 4500 (C) 1372 2 FS LPS 5 1,500 (E) 4.52 115 5.46 139 0.166 4,2 4.25 6,32 137 348 16608 7533 2100 (C) 640 2 FS LPS 6 1,500 (E) 5.00 127 6.02 153 0.184 4,7 5.10 7,59 150 381 20276 9197 1400 (C) 427 3 FS LPS 6 ½ 1,500 (E) 5.60 142 6.73 171 0.208 5,3 6.36 9,46 165 419 25687 11651 600 (C) 183 3 s per s per
Fiberspar Line Pipe High Pressure Product Data 3 E Series Continued Series 2250 2250 psi (15,5 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,250 (E) 1.89 48 2.45 62 0.106 2,7 1.12 1,67 61 155 4503 2043 9000 (A) 2743 3 FS LPS 2 ½ 2,250 (E) 2.37 60 3.03 77 0.135 3,4 1.68 2,50 76 193 7205 3268 9000 (B) 2743 2 FS LPS 3 2,250 (E) 2.82 72 3.57 91 0.157 4,0 2.28 3,39 89 226 9960 4518 4500 (A) 1372 3 FS LPS 3 ½ 2,250 (E) 3.33 84 4.18 106 0.186 4,7 3.10 4,61 105 267 13911 6310 4500 (C) 1372 2 FS LPS 4 2,250 (E) 3.75 95 4.69 119 0.210 5,3 3.84 5,71 117 297 17634 7999 3600 (C) 1097 2 FS LPS 5 2,250 (E) 4.52 115 5.64 143 0.253 6,4 5.54 8,24 141 358 25739 11675 2100 (C) 640 2 Series 2750 2750 psi (19,0 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,750 (E) 1.89 48 2.59 66 0.140 3,6 1.47 2,19 65 165 6247 2834 9000 (A) 2743 2 FS LPS 2 ½ 2,750 E (E) 2.37 60 3.21 81 0.173 4,4 2.22 3,30 80 203 9703 4401 4500 (A) 1372 3 FS LPS 3 2,750 (E) 2.82 72 3.79 96 0.205 5,2 3.08 4,58 95 241 13698 6213 4500 (B) 1372 2 FS LPS 3 ½ 2,750 (E) 3.33 84 4.37 111 0.238 6,0 3.94 5,86 109 277 18389 8341 3600 (C) 1097 2 FS LPS 4 2,750 E 3.75 95 4.89 124 0.265 6,7 4.87 7,25 122 310 23055 10458 3000 (C) 914 2 s per s per Series 3500 3500 psi (24,1 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 3,500 (E) 1.89 48 2.68 68 0.181 4,6 1.76 2,62 67 170 8227 3732 6000 (A) 1829 3 FS LPS 2 ½ 3,500 (E) 2.37 60 3.31 84 0.223 5,7 2.65 3,94 83 211 12694 5758 4500 (A) 1373 3 FS LPS 3 3,500 (E) 2.82 72 3.91 99 0.264 6,7 3.67 5,46 98 249 17907 8122 4500 (B) 1373 2 s per (1) Maximum Pressure Rating is for non-cyclic, water service. API 15S pressure ratings for hydrocarbon and gas service can be calculated by applying an additional safety factor of 0.8 for hydrocarbon and 0.67 for gas. If customers elects to use other safety factors, consult NOV Fiber Glass Systems. For other applications, consult NOV Fiber Glass Systems engineering. E = High - density polyethylene (HDPE) rated from -29 F to 140 F ( 34 C to 60 C) X = High - temperature polyethylene (HTP) rated from -29 F to 180 F ( 34 C to 82 C) XT = High - temperature polyethylene to -29 F to 203 F ( 34 C to 95 C) Size: (A) = 12 feet (B) = 14 feet (C) = 16 feet * Number of s per Truck is based on USA DOT regulations. All products are hydrotested to 1.5 times maximum recommended operating pressure. Material selection is based on the desired operating temperature and chemical compatibility of Fiberspar LinePipe constituents with fluids. Recommended field test pressure is 1.1 to 1.25 times the maximum operating pressure of the system.
4 Fiberspar Line Pipe High Pressure Product Data X Series Series 500 470 psi (3,2 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 5 500 (X) 4.52 115 5.24 133 0.056 1,4 2.67 3,97 131 333 5483 2487 2250 (C) 686 3 FS LPS 6 500 (X) 5.00 127 5.77 147 0.062 1,6 3.18 4,73 144 366 6704 3041 1800 (C) 549 3 FS LPS 6 ½ 500 (X) 5.60 142 6.45 164 0.070 1,8 3.92 5,83 161 409 8417 3818 600 (C) 183 3 Series 750 700 psi (4,8 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 3 750 (X) 2.82 72 3.37 86 0.057 1,4 1.35 2,01 84 213 3474 1576 6000 (B) 1829 3 FS LPS 4 750 (X) 3.75 95 4.41 112 0.070 1,8 2.16 3,21 110 279 5702 2586 4500 (C) 1372 2 FS LPS 5 750 (X) 4.52 115 5.31 135 0.088 2,2 3.13 4,66 133 338 8671 3933 2250 (C) 686 3 FS LPS 6 750 (X) 5.00 127 5.83 148 0.091 2,3 3.63 5,40 146 371 9947 4512 1800 (C) 549 3 FS LPS 6 ½ 750 (X) 5.60 142 6.51 165 0.102 2,6 4.48 6,67 163 414 12418 5633 600 (C) 183 3 s per s per Series 1100 1100 psi (7,6 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,100 (X) 1.89 48 2.37 60 0.064 1,6 0.85 1,26 59 150 2659 1206 9000 (A) 2743 3 FS LPS 2 ½ 1,100 (X) 2.37 60 2.90 74 0.072 1,8 1.14 1,70 72 183 3727 1691 9000 (B) 2743 2 FS LPS 3 1,100 (X) 2.82 72 3.42 87 0.081 2,1 1.57 2,34 85 216 4987 2262 6000 (B) 1829 3 FS LPS 3 ½ 1,100 (X) 3.33 84 4.00 102 0.095 2,4 2.07 3,08 100 254 6975 3164 4500 (B) 1372 3 FS LPS 4 1,100 (X) 3.75 95 4.49 114 0.109 2,8 2.54 3,78 112 284 8920 4046 4500 (C) 1372 2 FS LPS 5 1,100 (X) 4.52 115 5.39 137 0.130 3,3 3.62 5,39 134 340 12915 5858 2250 (C) 686 2 FS LPS 6 1,100 (X) 5.00 127 5.94 151 0.143 3,6 4.34 6,46 148 376 15632 7091 1680 (C) 512 3 FS LPS 6 ½ 1,100 (X) 5.60 142 6.63 168 0.159 4,0 5.35 7,96 166 422 19533 8860 600 (C) 183 3 Series 1500 1400 psi (9,7 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,500 (X) 1.89 48 2.38 61 0.071 1,8 0.90 1,34 60 152 2983 1353 9000 (A) 2743 3 FS LPS 2 ½ 1,500 (X) 2.37 60 2.95 75 0.094 2,4 1.36 2,02 74 188 4969 2254 9000 (B) 2743 2 FS LPS 3 1,500 (X) 2.82 72 3.46 88 0.104 2,6 1.78 2,65 87 221 6458 2929 4500 (A) 1372 3 FS LPS 3 ½ 1,500 (X) 3.33 84 4.05 103 0.122 3,1 2.39 3,56 101 257 8935 4053 4500 (B) 1372 2 FS LPS 4 1,500 (X) 3.75 95 4.55 115 0.138 3,5 2.97 4,42 114 290 11424 5182 4500 (C) 1372 2 FS LPS 5 1,500 (X) 4.52 115 5.46 139 0.166 4,2 4.25 6,32 137 348 16608 7533 2100 (C) 640 2 FS LPS 6 1,500 (X) 5.00 127 6.02 153 0.184 4,7 5.10 7,59 150 381 20276 9197 1400 (C) 427 3 FS LPS 6 ½ 1,500 (X) 5.60 142 6.73 171 0.208 5,3 6.36 9,46 168 427 25687 11651 600 (C) 183 3 s per s per
Fiberspar Line Pipe High Pressure Product Data 5 X Series Continued Series 2250 2250 psi (15,5 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,250 (X) 1.89 48 2.45 62 0.111 2,8 1.12 1,67 62 157 4750 2154 9000 (A) 2743 3 FS LPS 2 ½ 2,250 (X) 2.37 60 3.03 77 0.140 3,6 1.68 2,50 76 193 7457 3382 9000 (B) 2743 2 FS LPS 3 2,250 (X) 2.82 72 3.57 91 0.168 4,3 2.28 3,39 90 229 10693 4850 4500 (A) 1372 3 FS LPS 3 ½ 2,250 (X) 3.33 84 4.18 106 0.196 5,0 3.10 4,61 105 267 14658 6649 4500 (C) 1372 2 FS LPS 4 2,250 (X) 3.75 95 4.69 119 0.221 5,6 3.84 5,71 118 300 18607 8440 3600 (C) 1097 2 FS LPS 5 2,250 (X) 4.52 115 5.64 143 0.267 6,8 5.54 8,24 142 361 27236 12354 2100 (C) 640 2 s per Series 2750 2600 psi (17,9 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,750 (X) 1.89 48 2.59 66 0.140 3,6 1.47 2,19 65 165 6247 2834 9000 (A) 2743 2 FS LPS 2 ½ 2,750 (X) 2.37 60 3.21 81 0.173 4,4 2.22 3,30 80 203 9703 4401 4500 (A) 1372 3 FS LPS 3 2,750 (X) 2.82 72 3.79 96 0.205 5,2 3.08 4,58 95 241 13698 6213 4500 (B) 1372 2 FS LPS 3 ½ 2,750 (X) 3.33 84 4.37 111 0.238 6,0 3.94 5,86 109 277 18389 8341 3600 (A) 1097 2 FS LPS 4 2,750 (X) 3.75 95 4.89 124 0.265 6,7 4.87 7,25 122 310 23055 10458 3000 (A) 914 2 s per Series 3500 3300 psi (22,8 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 3,500 (X) 1.89 48 2.68 68 0.181 4,6 1.76 2,62 67 170 8227 3732 6000 (A) 1829 3 FS LPS 2 ½ 3,500 (X) 2.37 60 3.31 84 0.223 5,7 2.65 3,94 83 211 12694 5758 4500 (A) 1372 3 FS LPS 3 3,500 (X) 2.82 72 3.91 99 0.264 6,7 3.67 5,46 98 249 17907 8122 4500 (B) 1372 2 s per (1) Maximum Pressure Rating is for non-cyclic, water service. API 15S pressure ratings for hydrocarbon and gas service can be calculated by applying an additional safety factor of 0.8 for hydrocarbon and 0.67 for gas. If customers elects to use other safety factors, consult NOV Fiber Glass Systems. For other applications, consult NOV Fiber Glass Systems engineering. E = High - density polyethylene (HDPE) rated from -29 F to 140 F ( 34 C to 60 C) X = High - temperature polyethylene (HTP) rated from -29 F to 180 F ( 34 C to 82 C) XT = High - temperature polyethylene to -29 F to 203 F ( 34 C to 95 C) Size: (A) = 12 feet (B) = 14 feet (C) = 16 feet * Number of s per Truck is based on USA DOT regulations. All products are hydrotested to 1.5 times maximum recommended operating pressure. Material selection is based on the desired operating temperature and chemical compatibility of Fiberspar LinePipe constituents with fluids. Recommended field test pressure is 1.1 to 1.25 times the maximum operating pressure of the system.
6 Fiberspar Line Pipe High Pressure Product Data XT Series Series 500 425 psi (2,9 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 5 500 (XT) 4.52 115 5.24 133 0.056 1,4 2.67 3,97 131 333 5483 2487 2250 (C) 686 3 FS LPS 6 500 (XT) 5.00 127 5.77 147 0.062 1,6 3.18 4,73 144 366 6704 3041 1800 (C) 549 3 FS LPS 6 ½ 500 (XT) 5.60 142 6.45 164 0.070 1,8 3.92 5,83 161 409 8417 3818 600 (C) 183 3 Series 750 650 psi (4,5 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 3 750 (XT) 2.82 (72) 3.37 (86) 0.057 (1,4) 1.35 (2,01) 84 (213) 3474 (1576) 6000 (B) (1829) 3 FS LPS 4 750 (XT) 3.75 (95) 4.41 (112) 0.070 (1,8) 2.16 (3,21) 110 (279) 5702 (2586) 4500 (C) (1372 2 FS LPS 5 750 (XT) 4.52 (115) 5.31 (135) 0.088 (2,2) 3.13 (4,66) 133 (338) 8671 (3933) 2250 (C) (686) 3 FS LPS 6 750 (XT) 5.00 (127) 5.83 (148) 0.091 (2,3) 3.63 (5,40) 146 (371) 9947 (4512) 1800 (C) (549) 3 FS LPS 6 ½ 750 (XT) 5.60 (142) 6.51 (165) 0.102 (2,6) 4.48 (6,67) 163 (414) 12418 (5633) 600 (C) (183) 3 s per s per Series 1100 975 psi (6,7 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,100 (XT) 1.89 48 2.37 60 0.064 1,6 0.85 1,26 59 150 2659 1206 9000 (A) 2743 3 FS LPS 2 ½ 1,100 (XT) 2.37 60 2.90 74 0.072 1,8 1.18 1,76 73 185 3727 1691 9000 (B) 2743 2 FS LPS 3 1,100 (XT) 2.82 72 3.42 87 0.081 2,1 1.56 2,32 85 216 4987 2262 6000 (B) 1829 3 FS LPS 3 ½ 1,100 (XT) 3.33 84 4.00 102 0.095 2,4 2.11 3,14 100 254 6975 3164 4500 (B) 1372 3 FS LPS 4 1,100 (XT) 3.75 95 4.49 114 0.109 2,8 2.61 3,88 112 284 8920 4046 4500 (C) 1372 2 FS LPS 5 1,100 (XT) 4.52 115 5.39 137 0.130 3,3 3.72 5,53 135 343 12915 5858 2250 (C) 686 2 FS LPS 6 1,100 (XT) 5.00 127 5.94 151 0.143 3,6 4.44 6,61 148 376 15632 7091 1680 (C) 512 3 FS LPS 6 ½ 1,100 (XT) 5.60 142 6.63 168 0.159 4,0 5.48 8,15 166 422 19533 8860 600 (C) 183 3 s per Series 1500 1325 psi (9,1 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 1,500 (XT) 1.89 48 2.38 61 0.071 1,8 0.90 1,34 60 152 2983 1353 9000 (A) 2743 3 FS LPS 2 ½ 1,500 (XT) 2.37 60 2.95 75 0.094 2,4 1.36 2,02 74 188 4969 2254 9000 (B) 2743 2 FS LPS 3 1,500 (XT) 2.82 72 3.46 88 0.104 2,6 1.78 2,65 87 221 6458 2929 4500 (B) 1372 3 FS LPS 3 ½ 1,500 (XT) 3.33 84 4.05 103 0.122 3,1 2.39 3,56 101 257 8935 4053 4500 (B) 1372 2 FS LPS 4 1,500 (XT) 3.75 95 4.55 115 0.138 3,5 2.97 4,42 114 290 11424 5182 4500 (C) 1372 2 FS LPS 5 1,500 (XT) 4.52 115 5.46 139 0.166 4,2 4.25 6,32 137 348 16608 7533 2100 (C) 640 2 FS LPS 6 1,500 (XT) 5.00 127 6.02 153 0.184 4,7 5.10 7,59 150 381 20276 9197 1400 (C) 427 3 FS LPS 6 ½ 1,500 (XT) 5.60 142 6.73 171 0.208 5,3 6.36 9,46 168 427 25687 11651 600 (C) 183 3 s per
Fiberspar Line Pipe High Pressure Product Data 7 XT Series Continued Series 2250 2000 psi (13,8 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,250 (XT) 1.89 48 2.46 63 0.111 2,8 1.15 1,71 62 157 4750 2154 9000 (A) 2743 3 FS LPS 2 ½ 2,250 (XT) 2.37 60 3.04 77 0.140 3,6 1.72 2,56 76 193 7457 3382 9000 (B) 2743 2 FS LPS 3 2,250 (XT) 2.82 72 3.59 91 0.168 4,3 2.38 3,54 90 229 10693 4850 4500 (A) 1372 3 FS LPS 3 ½ 2,250 (XT) 3.33 84 4.20 107 0.196 5,0 3.20 4,76 105 267 14658 6649 4500 (C) 1372 2 FS LPS 4 2,250 (XT) 3.75 95 4.71 120 0.221 5,6 3.98 5,92 118 300 18607 8440 3600 (C) 1097 2 FS LPS 5 2,250 (XT) 4.52 115 5.66 144 0.267 6,8 5.75 8,55 142 361 27236 12354 2100 (C) 640 2 s per Series 2750 2425 psi (16,7 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 2,750 (XT) 1.89 48 2.59 66 0.140 3,6 1.47 2,19 65 165 6247 2834 9000 (A) 2743 2 FS LPS 2 ½ 2,750 (XT) 2.37 60 3.21 81 0.173 4,4 2.22 3,30 80 203 9703 4401 4500 (A) 1372 3 FS LPS 3 2,750 (XT) 2.82 72 3.79 96 0.205 5,2 3.08 4,58 95 241 13698 6213 4500 (B) 1372 2 FS LPS 3 ½ 2,750 (XT) 3.33 84 4.37 111 0.238 6,0 3.94 5,86 109 277 18389 8341 3600 (C) 1097 2 FS LPS 4 2,750 (XT) 3.75 95 4.89 124 0.265 6,7 4.87 7,25 122 310 23055 10458 3000 (C) 914 2 s per Series 3500 3100 psi (21,4 MPa) API 15HR Standard Pressure Rating and API 15S Maximum Pressure Rating (MPR) 1 FS LPS 2 3,500 (XT) 1.89 48 2.68 68 0.181 4,6 1.76 2,62 67 170 8227 3732 6000 (A) 1829 3 FS LPS 2 ½ 3,500 (XT) 2.37 60 3.31 84 0.223 5,7 2.65 3,94 83 211 12694 5758 4500 (A) 1372 3 FS LPS 3 3,500 (XT) 2.82 72 3.91 99 0.264 6,7 3.67 5,46 98 249 17907 8122 4500 (B) 1372 2 s per (1) Maximum Pressure Rating is for non-cyclic, water service. API 15S pressure ratings for hydrocarbon and gas service can be calculated by applying an additional safety factor of 0.8 for hydrocarbon and 0.67 for gas. If customers elects to use other safety factors, consult NOV Fiber Glass Systems. For other applications, consult NOV Fiber Glass Systems engineering. E = High - density polyethylene (HDPE) rated from -29 F to 140 F ( 34 C to 60 C) X = High - temperature polyethylene (HTP) rated from -29 F to 180 F ( 34 C to 82 C) XT = High - temperature polyethylene to -29 F to 203 F ( 34 C to 95 C) Size: (A) = 12 feet (B) = 14 feet (C) = 16 feet * Number of s per Truck is based on USA DOT regulations. All products are hydrotested to 1.5 times maximum recommended operating pressure. Material selection is based on the desired operating temperature and chemical compatibility of Fiberspar LinePipe constituents with fluids. Recommended field test pressure is 1.1 to 1.25 times the maximum operating pressure of the system.
8 Fiberspar Line Pipe High Pressure Product Data Typical Mechanical Properties Pipe Property Units 140 F 180 F 203 F C Method Long Term Hydrostatic psi 32,600 MPa 224 API 15HR 95% Lower Confidence Limit psi 21,840 MPa 150 API 15HR Circumferential Hoop Tensile Modulus psi 1,110,000 MPa 7,653 API 15HR Poisson's Ratio 0.63 API 15HR Longitudinal Axial Tensile Modulus psi 858,000 MPa 5,915 API 15HR Poisson's Ratio, V ha 0.49 API 15HR Typical Physical Properties Pipe Property Units 140 F 180 F 203 F C Method Axial Thermal Expansion in/in/ F 0.0000127 mm/mm/ C 0.0000229 NOV FGS Hazen Williams Coefficient 150 NOV FGS Absolute Roughness in 0.00021 NOV FGS Density lb/in 3 0.048 kg/m 3 1329 NOV FGS Specific Gravity 1.33 NOV FGS National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is any warranty expressed or implied. Always cross-reference the bulletin date with the most current version listed at the web site noted in this literature. Fiber Glass Systems 17115 San Pedro Avenue, Ste 200 San Antonio, Texas 78232 USA Phone: 210 477 7500 Fax: 210 477 7560 2015 National Oilwell Varco All Rights Reserved OG6000ENG June 2015 15HR-0037 / 15HR-0039 LICENSEE Q1 RATED