PLEXPOWER LIGHTING AND POWER PANELBOARDS PRODUCT GUIDE

PLEXPOWER LIGHTING AND POWER PANELBOARDS PRODUCT GUIDE

EASY TO INSTALL, OPERATE AND MAINTAIN. PlexPower Panelboards use circuit breaker modules that provide explosionproof protection for standard off-the-shelf breakers eliminating the need for a heavy cast enclosure. Component level protection means the panelboard enclosure is lighter, more compact and easier to install. Breakers can be easily replaced, upgraded or added in the field with no bolted cover to remove, no need for sealing or rewiring and no danger of compromising flamepath integrity. A true MCCB mains breaker eliminates the need for a disconnect and fuse replacements. There s never been a simpler, more versatile way to protect lighting, power and heat trace circuits in wet, weather exposed, corrosive or hazardous locations. PlexPower Panelboards the new innovation in panelboard simplicity, only from Appleton. Page 2

SIMPLIFY PANELBOARD INSTALLATION AND BREAKER MAINTENANCE PlexPower panelboards eliminate the need for a heavy cast enclosure and bolted cover. Instead, explosionproof protection is provided at the component level enabling a lighter weight panelboard that s easier to install, operate and maintain. CERTIFICATIONS Lighting Panelboards with Main Lugs: 120/240 Volt, 240 Volt, 120/208 Volt Class I, Zone 1, AEx de IIB+H 2 T5 Ex de IIB+H 2 T5 Class I, Division 2, Groups B, C, D Class II, Division 1, Groups F, G (without drain/breather) Class III (without drain/breather) IP66, Type 4X (with drain/breather) Lighting Panelboards with Main Breaker: 120/240 Volt, 240 Volt, 120/208 Volt Class I, Zone 1, AEx de IIB T5 Ex de IIB T5 Class I, Division 2, Groups C, D Class II, Division 1, Groups F, G (without drain/breather) Class III (without drain/breather) IP66, Type 4X (with drain/breather) Power Panelboards: 277/480 Volt, 480 Volt, 347/600 Volt, 600 Volt Class I, Zone 1, AEx de IIB T5 Ex de IIB T5 Class I, Division 2, Groups C, D Class II, Division 1, Groups F, G (without drain/breather) Class III (without drain/breather) IP66, Type 4X (with drain/breather) Fused Lighting and Power Panelboards: 120-600 Volt Class I, Zone 1, AEx de IIB T5 Ex de IIB T5 Class I, Division 2, Groups C, D Class II, Division 1, Groups F, G (without drain/breather) Class III (without drain/breather) IP66, Type 4X (with drain/breather) STANDARD FEATURES Factory Sealed Panelboards features 1-, 2-, 3- pole branch breakers only. Fused Factory Sealed Panelboards features 3- pole branch switches with fuses. Ground-breaking design uses individual breaker housings to minimize the downtime and cost of servicing circuit breakers in hazardous locations Lighter weight enclosure is easier to install and can be quickly opened in the field for easier servicing No external conduit or cable seals required, making installations faster, easier, and less costly Horizontal and vertical coupling options for limitless installation flexibility 3 circuit to 54 circuit panelboard configurations are standard, with or without mains breaker; up to 60 Amps per branch breaker (contact your local representative for larger amperages) Uses standard, off-the-shelf main and branch circuit breakers and fuses that are easy to source, stock and service Supplied with standard hard drawn, tin plated copper bus bar for superior corrosion resistance Gland plate at the bottom of enclosure and optional gland plates on all sides can be easily field punched for cable or conduit entries Standard configuration includes internal actuators and a solid door; factory installed options include window door or external actuators Breaker modules supplied with captive bolts Ground and neutral bars provided as standard External ground lug provided as standard Page 3

BUILT FOR THE GLOBAL MARKETPLACE Appleton PlexPower panelboards provide explosionproof protection of lighting, heat trace and power circuits in NEC/CEC Class I, Division 2; Class I, Zone 1; and Class II hazardous locations. Indoors or outdoors, in weather exposed and corrosive environments, PlexPower panelboards provide the ideal electrical distribution solution for every part of your facility. INDUSTRIES AND APPLICATIONS PlexPower panelboards provide indoor and outdoor protection and control of electrical circuits in hazardous environments. These robust and rugged panelboards are ideal for placement in wet, corrosive environments or where flammable gases or vapors are likely to be present. CHEMICAL AND PETROCHEMICAL MANUFACTURING WASTE AND WASTEWATER TREATMENT FACILITIES OFFSHORE DRILLING RIGS REFINERIES Page 4

CONFIGURED TO YOUR EXACT REQUIREMENTS PlexPower panelboards are available in materials to suit your needs for corrosion resistance and durability. Factory installed options allow you to specify panelboards that deliver optimal performance for every facet of your operation. When you need to upgrade, PlexPower is designed for easy reconfiguration and expansion in the field with no need to seal conduit or cable entries and no need to rewire terminations. STANDARD MATERIALS Enclosure: 304 stainless steel Hardware: stainless steel Bus bar: hard drawn, tin plated copper STANDARD OPTIONS Alternate enclosure material: 316L stainless steel, add suffix 316L Drain/breather, add suffix DV (with drain/breather) Ground fault interrupter breakers for 120V sinlge pole: For 5 ma, add suffix GFI after breaker For 30 ma, add suffix EPD after breaker External actuation, add suffix EXT Grounded neutral, add suffix GN Gland plate, specify suffix: GPL = left side GPR = right side GPT = top side NGP = no gland plate Thermostatically controlled heater, (without drain/breather) For Class I, Division 2 and Class I, Zone 2 equivalency, add suffix HTR. For Lighting Panels with Main Lugs, Class I, Division 2, Groups B, C, D and Class I, Zone 2 IIB+H 2. For Lighting Panels with Main Breaker or Power Panels, Class I, Division 2, Groups C, D and Class I, Zone 2 IIB. For Class I Zone 1 certification, add suffix HTRF. No change to standard Certifications. LED indicator lights, add suffix IL Inverted feed, add suffix INV Phenolic nameplate (specify legend), add suffix NP Door padlocking provision, add suffix P Stainless steel legend plate (specify legend), add suffix SP Terminal blocks instead of direct wiring, add suffix TB Higher ambient temperature rated breakers available (de-rating applies): For +50 C (+122 F) breaker rating, add suffix V For +60 C (+140 F) breaker rating, add suffix VI For +70 C (+158 F) breaker rating, add suffix VII Window with internal actuation only, add suffix W STANDARD OFF-THE-SHELF BREAKERS FACTORY SEALED PANELBOARDS Available breaker modules: QC Frame F-Frame Available mains circuit breaker: Up to 150 Amps, 2- or 3-pole Available branch circuit breakers: 1-pole: 120, 277, 347 Volts, 60 Amps maximum 1-pole: 120 Volts, 30 Amps, GFI or EPD 2- and 3-pole: 240 Volts, 40 Amps maximum 2- and 3-pole: 480, 600 Volts, 150 Amps maximum FUSED FACTORY SEALED PANELBOARDS Available breaker modules: F-Frame Available mains circuit breakers: Up to 150 Amps maximum Available fuses: Up to 30 Amps maximum Page 5

CIRCUIT PROTECTION AND CONTROL SIMPLIFIED With component level protection, standard ordinary location circuit breakers can be replaced or upgraded in minutes with no danger of compromising flamepaths. An optional mains breaker simplifies disconnection of all branch circuits for maintenance, with no disconnect fuses to replace. BREAKER FLEXIBILITY MAINS BREAKER MODULE 1. Rugged Termination: Each housing connects to the panelboard by means of line terminations designed for unyielding performance through years of heavy vibrations and shocks. 2. Flameproof enclosure housing: Labyrinth joint construction and flame arrestors maintain hazardous location rating while allowing easy disassembly for servicing breakers. 3. Venting plate: Unique design of housing allows safe heat dissipation, enabling breakers to maintain their rated amperage while eliminating nuisance tripping. 4. Field Replaceable Components: Standard, off-the-shelf circuit breakers and fuses are easy to obtain and reduce inventory costs and downtime. 5. Field Replaceable Fuses: Standard, off-the-shelf fused circuit breakers are easy to obtain and reduce inventory costs and downtime. 1 2 3 1 BRANCH BREAKER MODULE 2 3 4 4 FUSED MODULE 2 3 1 5 Page 6

EASY TO INSTALL Engineered to solve operational problems, PlexPower panelboards are built of lighter materials to install simply and securely into your existing layout. The modular design can be easily reconfigured in the field to accommodate the circuits you need today and tomorrow. FUSED FACTORY SEALED PANELBOARD SIZE E 12 CIRCUIT HINGES Robust hinges allow for 180 door opening. COVER Self-aligning, reinforced cover is easy to open and resists twisting or deformation. MOUNTING FEET Robust hardware with welded mounting feet for greater strength. LATCHES Quarter turn latches for easy access. No danger of improperly torquing cover bolts or damaging a precision machined flamepath. Page 7

EASY TO OPERATE PlexPower panelboards are designed with the user in mind, providing instant visual confirmation of breaker position and easy access to actuators, with no heavy cover to unbolt, remove and replace. FACTORY SEALED PANELBOARD SIZE D 12 CIRCUIT ENCLOSURE Available in 304 stainless steel for exceptional corrosion resistance; other materials available. OPTIONAL EXTERNAL ACTUATION WITH LOCKING GUARD Standard configuration includes internal actuators and a solid door. Factory installed options include window door or external actuators. INDICATORS High intensity LED lights allow easy visual identification of breaker position. GROUND LUG External/internal ground lug provided as standard to dissipate and limit the rise in voltage of the grounded unit. GLAND PLATE Gland plate on the bottom and optional removable gland plates on every side allow for the addition of new cable entries in the field. DRAIN/BREATHER Optional fitting is installed at the bottom of the enclosures to allow water vapor to escape and minimize condensation within the enclosure interior. Page 8

EASY TO MAINTAIN PlexPower powerboards simplify maintenance, with ample working room, a bus bar design, hard drawn branch breaker, connections and modular breaker housings that are easy to open for service. INCOMING MAINS BREAKER (MCCB) OR DISCONNECT Optional 3-pole mains breaker up to 150 Amps for simple disconnection of all branch circuits for maintenance, with no disconnect fuses to replace. NEUTRAL LUG Standard neutral lug mounted on a standard neutral bus bar for incoming neutral connection. BUS BAR Stand hard drawn copper bus bar provides robust, reliable and efficient electrical connections in a compact space. GROUND LUG Standard ground lug for incoming connection. ACTUATORS Optional self-aligning stainless steel actuators. GROUND BUS Standard ground lug for incoming connection. CONNECTION LINKS Hard copper branch connections. FACTORY INSTALLED LINE CONNECTIONS Simplified wiring with plenty of working room; connections are sized to accept 1-pole branch breakers up to 347 Volts/60 Amps, and 2- or 3-pole breakers up to 600 Volts/150 Amps. Page 9

STEPS TO CREATING A CATALOG NUMBER FACTORY SEALED LIGHTING PANELBOARDS RQ S D1 3 1 M 12 100 1 15 1 GFI Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 1: Choose basic catalog number from tables on subsequent pages or from numbering guide on previous page. Step 2: If a main breaker is desired indicate amperage rating. Example: RQSD131M12 100 is a 12 circuit 3 phase panelboard c/w 100 amp main breaker. Step 3: First digits are the quantity of breakers, second the ampere rating, and third the number of poles. Example: 1151 is 1 breaker, 15 amps, 1 pole breaker Step 4: This is where breaker type is indicated Blank - standard breaker GFI - 5 ma GFI breaker- single pole only (limited to 2 breakers per 3 circuit module) EPD - 30 ma EPD breaker- single pole only (limited to 2 breakers per 3 circuit module) Step 5: Repeat steps 3 and 4 for as many breaker types as required Step 6: Options: Add option in alphanumeric order as listed PlexPower introduction page under Options. FUSED FACTORY SEALED PANELBOARDS RFF S E1 3 1 M 12 100 1 15 T Step 1 Step 2 Step 3 Step 4 Step 5 Step 1: Choose basic catalog number from tables on subsequent pages or from numbering guide on previous page. Step 2: If a main breaker is desired indicate amperage rating. Example: RFFSE131M12 100 is a 12 circuit 3 phase panelboard c/w 100 amp main breaker. Step 3: First digits are the quantity of breakers, second the fuse ampere rating, and third the type of fuse. Example: 115T is 1 fuse, 15 amps, T for time delay Step 4: Repeat step 3 for as many breaker types as required Step 5: Options: Add option in alphanumeric order as listed PlexPower introduction page under Options. Page 10

FACTORY SEALED LIGHTING Standard Panelboard Catalog Logic RQ S D1 3 1 M 12 100 1 15 3 GFI Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Series and Breaker Type: RQ - 120 to 240 V panel with QC Breakers System Voltage: 1-120/240 2-240 3-120/208 8 - Special Contact (Consult your local representative for price and availability.) Number of Circuits: 03 06 12 18 24 30 36 42 48 54 Ampere Rating : 15-15AT 20-20AT 25-25AT 30-30AT 40-40AT 45-45AT 50-50AT 60-60AT Additional Branch Breakers: Repeat Step 3 Panel Material: S - Stainless Steel (304 standard. For 316L use S here and add 316L suffix at end of catalog number) Bus Rating: 1-100 Amp lug 2-225 Amp lug Main Type: M - Main Breaker L - Main Lug Only Main Breaker Ampere Rating: 020-20AT 025-25AT 030-30AT 040-40AT 050-50AT 060-60AT 070-70AT 080-80AT 090-90AT 100-100AT 110-110AT 125-125AT 150-150AT Quantity of Branch Breakers: 1 thru 54 Number of Poles: 1-1-Pole 2-2-Poles 3-3-Poles Breaker Type: Normal Duty (Leave Blank) EPD GFI Suffix for Other Options/ Features: Must be listed in alphanumeric sequence (See Options) Panel Size: Select A1, B1, C1, D1, J1, F1, L1 or H1 stainless steel enclosure based on number of circuits Bus A1 B1 C1 D1 J1 F1 L1 H1 Amps Volts 370x370x250 560x370x250 560x560x250 750x560x250 875x560x250 1130x560x250 1260x560x250 1500x560x250 Main Lugs Only External Actuation Only 100 3 6 12 18 24 30, 36 42 48, 54 240 Max 225 12 18 24 30, 36 42 48, 54 With Main Breaker External Actuation Only 100 3 6 12 18 30 36 42, 48 240 Max 225 12 18 30 36 42, 48 Main Lugs Only Internal Actuation Only 100 3 6 12 18 24 30, 36 42 48, 54 240 Max 225 12 18 24 30, 36 42 48, 54 With Main Breaker Internal Actuation Only 100 6 12 18 30 36 42, 48 240 Max 225 12 18 30 36 42, 48 Please note the followings: Number of circuits shown are non GFI and non EPD breakers. GFI and EPD breakers number of circuits are determined as total number of circuits divided by 3 = No of 3 pole modules. Each module will accommodate only 2 GFI or EPD maximum. Example: For 12 Circuits, no of modules = 12/3=4. NEC/CEC Certified lighting panels: 120/240 Volt, 240 Volt, 120/208 Volt. Only 2 per 3 circuits. Only Single pole GFI/EPD available. 40A is the maximum amperage for 2 or 3 pole branch breaker. Only one 60A branch breaker is allowed per panel. Page 11

FACTORY SEALED POWER Standard Panelboard Catalog Logic RF S D1 3 1 M 12 100 1 15 3 Series and Breaker Type: RF - 480 to 600 V panel with F-Frame Breakers Panel Material: S - Stainless Steel (304 standard. For 316L use S here and add 316L suffix at end of catalog number) Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 System Voltage: 4-277/480 5-480 6-347/600 7-600 8 - Special Contact (Consult your local representative for price and availability.) Bus Rating: 1-100 Amp lug 2-225 Amp lug Main Type: M - Main Breaker L - Main Lug Only Number of Circuits: 03 06 12 18 24 30 36 42 Main Breaker Ampere Rating: 020-20AT 025-25AT 030-30AT 040-40AT 050-50AT 060-60AT 070-70AT 080-80AT 090-90AT 100-100AT 110-110AT 125-125AT 150-150AT Ampere Rating: 15-15AT 20-20AT 25-25AT 30-30AT 35-35AT 40-40AT 50-50AT 60-60AT 70-70AT (not for 1-Pole) 80-80AT (not for 1-Pole) 90-90AT (not for 1-Pole) 100-100AT 110-110AT (2-, 3-Pole, 480, 600 Only) 125-125AT (2-, 3-Pole, 480, 600 Only) 150-150AT (2-, 3-Pole, 480, 600 Only) Quantity of Branch Breakers: 1 thru 42 Number of Poles: 1-1-Pole 2-2-Poles 3-3-Poles Breaker Type: Normal Duty (Leave Blank) Additional Branch Breakers: Repeat Step 3 Suffix for Other Options/ Features: Must be listed in alphanumeric sequence (See Options) Panel Size: Select A1, C1, I1, E1, K1 or G1 stainless steel enclosure based on number of circuits Bus A1 C1 I1 E1 K1 G1 Amps Volts 370x370x250 560x560x250 875x750x250 1130x750x250 1260x750x250 1500x750x250 Main Lugs Only External Actuation Only 100 3 6 12, 18 24 30 36, 42 277/480; 480; 347/600; 600 225 6 12, 18 24 30 36 With Main Breaker External Actuation Only 100 12 18 24 36, 30 277/480; 480; 347/600; 600 225 12 18 24 30 Main Lugs Only Internal Actuation Only 100 3 6 12, 18 24 30 36, 42 277/480; 480; 347/600; 600 225 6 12, 18 24 30 36 With Main Breaker Internal Actuation Only 100 12 12 18 24 36, 30 277/480; 480; 347/600; 600 225 12 12 18 24 30 Please note the followings: Alternative arrangement are available as option, consult local sales representative. NEC/CEC Certified power panels: 277/480 Volt, 480 Volt, 347/600 Volt, 600 Volt. Page 12

FUSED FACTORY SEALED Standard Panelboard Catalog Logic RFF S E1 3 1 M 12 100 1 15 T Step 1 Step 2 Step 3 Step 4 Step 5 Fused Series: RFF - up to 600 V Fused Panel with F-Frame Switch and Class J fuse holder 3 Phase System Voltage: 2-240 3-120/208 4-277/480 5-480 6-347/600 7-600 Number of Circuits: 03 06 09 12 15 18 Fuse Ampere Rating : 01-01AT 02-02AT 03-03AT 04-04AT 05-05AT 06-06AT 07-07AT 08-08AT 09-09AT 10-10AT 15-15AT 20-20AT 25-25AT 30-30AT Suffix for Other Options/ Features: Must be listed in alphanumeric sequence (See Options) Panel Material: S - Stainless Steel (304 standard. For 316L use S here and add 316L suffix at end of catalog number) Bus Rating: 1-150 Amp 2-180 Amp Main Type: M - Main Breaker (150 A Max) L - Main Lug Only (180 A Max) Main Breaker Ampere Rating: 020-20AT 025-25AT 030-30AT 040-40AT 050-50AT 060-60AT 070-70AT 080-80AT 090-90AT 100-100AT 110-110AT 125-125AT 150-150AT Quantity of Branch Fuses: up to 18 Fuse Type: T - Time delay F - Fast acting Additional Branch Fuses: Repeat Step 3 Panel Size: Select enclosure based on number of circuits Bus Amps Main Type I1 E1 G1 875x750x250 1130x750x250 1500x750x250 180 Main Lugs 03, 06, 09 12, 15 18 150 Main Breaker 03, 06 09, 12 15 Fast acting fuses are available in the following amperages: 1, 3, 6, 10, 15, 20, 25 and 30. Page 13

PLEXPOWER FACTORY SEALED PANELBOARD QC -FRAME WITH MAIN LUGS Dimensions: Stainless Steel Enclosures SIZE B 6 CIRCUIT INTERNAL ACTUATION TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW 595 mm (23.43") 560 mm (22.03") 250 mm (9.85") 144 mm (5.68") 250 mm (9.85 ") 229 mm (9.02") 51 mm (2.01") 285 mm (11.22") 370 mm (14.57") SIZE B 6 CIRCUIT EXTERNAL ACTUATION FRONT VIEW SIDE VIEW 595 mm (23.43 ") 560 mm (22.03 ") 250 mm (9.85 ") 9.85 " (250 mm) 51 mm (2.01 ") 229 mm (9.02 ") 1 3 5 2 4 6 285 mm (11.22 ") 370 mm (14.57 ") Page 14

PLEXPOWER FACTORY SEALED PANELBOARD QC -FRAME WITH MAIN LUGS Dimensions: Stainless Steel Enclosures SIZE H 54 CIRCUIT INTERNAL ACTUATION TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW 595 mm (23.43 ") 258 mm (10.17 ") 560 mm (22.04 ") 250 mm (9.85 ") 250 mm (9.85 ") 668 mm (26.28 ") 1500 mm (59.06 ") 51 mm (2.02 ") 668 mm (26.28 ") 229 mm (9.02 ") SIZE H 54 CIRCUIT EXTERNAL ACTUATION FRONT VIEW SIDE VIEW 595 mm (23.43 ") 560 mm (22.04 ") 250 mm (9.85 ") 51 mm (2.02 ") ON TRIP OFF 5 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 1500 mm (59.06 ") 3 2 48 49 50 51 52 53 54 668 mm (26.28 ") 1 668 mm (26.28 ") ON TRIP OFF 229 mm (9.02 ") Page 15 250 mm (9.85 ")

ON TRIP OFF 1 3 5 2 4 6 ON TRIP OFF PLEXPOWER FACTORY SEALED PANELBOARD QC -FRAME WITH MAIN BREAKER Dimensions: Stainless Steel Enclosures SIZE C 6 CIRCUIT INTERNAL ACTUATION TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW 595 mm (23.43 ") 560 mm (22.04 ") 250 mm(9.85 ") 126 mm (4.98 ") 250 mm (9.85 ") 51 mm (2.01 ") 395 mm (15.55 ") 560 mm (22.04 ") 229 mm (9.02 ") SIZE C 6 CIRCUIT EXTERNAL ACTUATION FRONT VIEW SIDE VIEW 595 mm (23.43 ") 560 mm (22.04 ") 250 mm (9.85 ") 250 mm (9.85 ") 51 mm (2.01 ") 229 mm (9.02 ") 395 mm (15.55 ") 560 mm (22.04 ") Page 16

PLEXPOWER FACTORY SEALED PANELBOARD QC -FRAME WITH MAIN BREAKER Dimensions: Stainless Steel Enclosures SIZE H 48 CIRCUIT INTERNAL ACTUATION TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW 595 mm (23.43 ") 668 mm (26.28 ") 50 mm (9.85 ") 177 mm (6.98 ") 250 mm (9.85 ") 560 mm (22.04 ") 1500 mm (59.06 ") 51 mm (2.02 ") 668 mm (26.28 ") 229 mm (9.02 ") SIZE H 48 CIRCUIT EXTERNAL ACTUATION FRONT VIEW SIDE VIEW 595 mm (23.43 ") 560 mm (22.04 ") 250 mm (9.85 ") ON TRIP OFF 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 668 mm (26.28 ") 5 1500 mm (59.06 ") ON TRIP OFF 668 mm (26.28 ") 51 mm (2.02 ") 229 mm (9.02 ") Page 17 250 mm (9.85 ")

PLEXPOWER FACTORY SEALED PANELBOARD F-FRAME WITH MAIN LUGS Dimensions: Stainless Steel Enclosures SIZE C 6 CIRCUIT INTERNAL ACTUATION TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW SIZE C 6 CIRCUIT EXTERNAL ACTUATION FRONT VIEW SIDE VIEW Page 18

PLEXPOWER FACTORY SEALED PANELBOARD F-FRAME WITH MAIN LUGS Dimensions: Stainless Steel Enclosures SIZE G 36 CIRCUIT INTERNAL ACTUATION TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW SIZE G 36 CIRCUIT EXTERNAL ACTUATION FRONT VIEW SIDE VIEW Page 19

PLEXPOWER FACTORY SEALED PANELBOARD F-FRAME WITH MAIN BREAKER Dimensions: Stainless Steel Enclosures SIZE I 12 CIRCUIT INTERNAL ACTUATION TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW SIZE I 12 CIRCUIT EXTERNAL ACTUATION FRONT VIEW SIDE VIEW Page 20

PLEXPOWER FACTORY SEALED PANELBOARD F-FRAME WITH MAIN BREAKER Dimensions: Stainless Steel Enclosures SIZE G 30 CIRCUIT INTERNAL ACTUATION TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW SIZE G 30 CIRCUIT EXTERNAL ACTUATION FRONT VIEW SIDE VIEW Page 21

PLEXPOWER FUSED FACTORY SEALED PANELBOARD WITH BUS BAR F-FRAME Dimensions: Stainless Steel Enclosures SIZE I 09 CIRCUIT WITH MAIN LUGS TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW 785 mm (30.91 ) Mtg. 750 mm (29.53 ) 250 mm (9.85 ) 355 mm (13.98 ) Mtg. 875 mm (34.45 ) 355 mm (13.98 ) Mtg. SIZE I 06 CIRCUIT WITH MAIN BREAKER TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW 785 mm (30.91 ) Mtg. 750 mm (29.53 ) 250 mm (9.85 ) 355 mm (13.98 ) Mtg. 875 mm (34.45 ) 355 mm (13.98 ) Mtg. Page 22

PLEXPOWER FUSED FACTORY SEALED PANELBOARD WITH BUS BAR F-FRAME Dimensions: Stainless Steel Enclosures SIZE G 18 CIRCUIT WITH MAIN LUGS TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW 785 mm (30.91 ) Mtg. 750 mm (29.53 ) 250 mm (9.85 ) 688 mm (26.28 ) Mtg. 688 mm (26.28 ) Mtg. 1500 mm (59.06 ) SIZE G 15 CIRCUIT WITH MAIN BREAKER TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW 785 mm (30.91 ) Mtg. 750 mm (29.53 ) 250 mm (9.85 ) 688 mm (26.28 ) Mtg. 688 mm (26.28 ) Mtg. 1500 mm (59.06 ) Page 23

Emerson brings integrated manufacturing solutions to diverse industries worldwide. Our comprehensive product line, extensive experience, world-class engineering and global presence enable us to implement solutions that give our customers the competitive edge. Appleton is our premium line of lighting and electrical products for hazardous and industrial locations. For over 150 years, our electrical product brands have been providing a rich tradition of long-term, practical, high quality solutions with applications ranging from the construction and safe operation of petrochemical and process plants to providing quality power that precisely controls automotive robotic production. Engineers, distributors, contractors, electricians and site maintenance professionals around the world trust Emerson brands to make electrical installations safer, more productive and more reliable. The Appleton Group business unit of Emerson is organized into three focused groups that provide distributors and end users expert knowledge and excellent service. Electrical Construction Materials This group is made up of the Appleton and O-Z/Gedney brands. They manufacture a broad range of electrical products including conduit and cable fittings, plugs and receptacles, enclosures and controls, conduit bodies and industrial and hazardous lighting. Whether the application is hazardous location, industrial or commercial, the electrical construction materials group has the products to meet your needs. Power Quality Solutions The SolaHD brand offers the broadest power quality line, including uninterruptible power supplies, power conditioners, voltage regulators, shielded transformers, surge protection devices and power supplies. Heating Cable Systems This group is made up of the EasyHeat and Nelson brands. They offer a broad range of electrical heating cable products for residential, commercial and industrial applications. Asia/Pacific + 65.6556.1100 Australia + 61.3.9721.0348 Canada + 1.888.765.2226 China + 86.21.3338.7000 Europe + 33.3.22.54.13.90 Mexico/Latin America + 52.55.5809.5049 Middle East/Africa/India + 971.4.881.8100 United States + 1.800.621.1506 Appleton Group 9377 W. Higgins Road Rosemont, IL 60018 1.800.377.4384 appletonelec.com Appleton Grp LLC d/b/a Appleton Group. The Appleton and Emerson logos are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. 2016, Appleton Grp LLC. All rights reserved. The Emerson logo is a trademark and a service mark of Emerson Electric Co. 2016, Emerson Electric Co.