ROLLER BLINDS (Internal) Specification Manual_V1
ROLLER BLIND SYSTEM 5. General information s VANGUARD Roller Blind System Pelmet and guide rails Made of extruded aluminium Bottom rail Made of extruded aluminium with plastic end caps of polypropylene Installation brackets Mild steel, zinc plated and powder coated Chain Pressed stainless steel, polished Application VANGUARD Roller Blinds are developed for internal use. The blinds provide effective and efficient control of heat, light and glare. High quality components ensure a long life and smooth and quiet operation. Depending on requirements, there are varying levels of light filtering available through the large range of quality fabrics. The Vanguard Roller Blind range includes the Dual System for using two different types of fabric, the Linked System for joining multiple blinds and reducing motorization costs, and the Corner System for linking corner blinds. Benefit - UV & heat protection - Energy saving- reduces air conditioning costs - Ensures privacy whilst maintaining natural light if desired - Reduces glare- suitable for offices - Minimalist design Operation/Installation VANGUARD Roller Blinds can be driven by a motor, and operated via a mounted wall switch or hand held remote control; or they can manually operated via a smooth running stainless steel chain. The motors can be hardwired, or integrated with a lighting and energy management system such as C-Bus. SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 3
5.1 Tender specification VANGUARD Roller Blind System STANDARD Shaft Made of extruded aluminium, diameter 38x1,25 or 43x1,25. Including control end system features and locking feature to secure the unit into the bracket. Sizes 32/32, 40/45 for easy operation. Brackets and bracket covers For top face or side fix installation. Brackets material: mild steel, zinc plated and powder coated 20x1,5 ; Sizes of the brackets in depending of the system and tube sizes. The bracket covers can be grey, white, beige or black. Bottom rail Made of extruded aluminium dimensions 11x22, with drawn-in brush and lateral gliders for the plastic side guide rail. Round or oval bottom rail available. The caps on both ends are made from high impact UVS polypropylene in master colours. Operation With stainless steel control: roll-up safety device via servo coupling, smooth positioning of the blind, swivelling ball chian exit. Operation either from the right or left side. Via motor control: the VANGUARD roller blind can be driven by motor or operated via wall switch or remote control. The blind is driven by 40 Elero Motor, with a glass filled nylon drive retaining clip. The O-ring lock the Drive Wheel to the motor. Motor and controls can be remote controlled, hardwired for control by wall switches or integrated with build management system such as Cibus. Intermediate bearing bracket Press formed steel, pre-treated and powder coated, stainless steel bearing 40 and grub screw. Colours Standard colours: Snow Withe 062; Black 050; Birch White 412; N. Anodised 020; Rivergum 421. Offered in All Dulux and Interpon powder coat colours, some non standard colours attract a small surcharge. Fabric Available in a large range of colours, textures weight and sizes. Fabrics composition 100% polyester or polymer coated glass fibre. Installation Installation with clip on the wall or on the ceiling; optional installation in the soffit via soffit bracket or via mounting rail. Limited sizes Roller Blind Drive Max. Surf. m2 Min. Width Max. Width Min. Height Max. Height Chain/Motor 7.5 250 2.900 250 3.000
ROLLER BLIND SYSTEM 5.2 Tender specification VANGUARD Roller Blind System HEAVY DUTY Shaft Made of extruded aluminium heavy duty, diameter 60. including spring steel wire 10 inner aluminium tube with PVC cover. On both end Abs nylon & Acetal with steel roller bearings. Brackets and bracket covers For top face or side fix installation. Brackets material: high grade stamped steel powder coated. The bracket covers can be grey, white, beige or black in high grade ABS polycarbonate alloy. Bottom rail Made of extruded aluminium dimensions heavy duty rectangular 41x15. On both end caps in Acetal in master colour. Operation With Stainless steel control: spring installation made nylon and high tensile wound spring steel with PVC cover, smooth positioning of the blind, swivelling ball chian exit. Operation either from the right or left side. Via motor control: the VANGUARD roller blind can be driven by motor or operated via wall switch or remote control. The blind is driven by a 50 Elero tubular motor, with a glass filled nylon drive retaining clip. For the motor driven blind can be used also the combo system. The motor is connected through a O-ring to the Wheel. Motor and controls can be remote controlled, hardwired for control by wall switches or integrated with build management system such as Cibus. Bracket High grade stamped steel and powder coated brackets. Including high grade ABS polycarbonate alloy plastic covers. Colours Standard colours: Snow Withe 062; Black 050; Birch White 412; N. Anodised 020; Rivergum 421. Offered in All Dulux and Interpon powder coat colours, some non standard colours attract a small surcharge. Fabric Available in a large range of colours, textures weight and sizes. Fabrics composition 100% polyester or polymer coated glass fibre. Installation Installation with clip on the wall or on the ceiling; optional installation in the soffit via soffit bracket or via mounting rail. Limited sizes Roller Blind Fabric weight Max. Surf. Min. Width Max. Width Min. Height Max. Height below 400g/m 15m² 400 3.400 300 7.000 over 400g/m 15m² 400 3.000 300 5.000 SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 5
5.3 Tender specification VANGUARD Roller Blind System standard with pelmet Shaft Made of extruded aluminium, diameter 38x1,25 or 43x1,25. Including control end system features a locking feature to secure the unit into the bracket. Sizes 32/3 or 40/45 for easy operation. Box Extruded Aluminium T5, dimension 90x90; with end cover set incl. screws in polycarbonate. With mounting pin to insert the side guide rail. Side guide rails Made of extruded aluminium, dimensions 24x54,7 with drawn-in brush insert and plastic end cap. Bottom rail Made of extruded aluminium dimensions 11x22, with drawn-in brush and lateral gliders for the plastic side guide rail. Round or oval bottom rail available. The end caps on both ends are made from high impact UVS polypropylene in master colours. Intermediate bearing bracket Press formed steel, pre-treated and powder coated, stainless steel bearing 40 and grub screw. Operation With Stainless steel control: spring installation made nylon and high tensile wound spring steel with PVC cover., smooth positioning of the blind, swivelling ball chian exit. Operation either from the right or left side. Via motor control: the VANGUARD roller blind can be driven by motor or operated via wall switch or remote control. The blind is driven by a 50 Elero tubular motor, with a glass filled nylon drive retaining clip. For the motor driven blind can be used also the combo system. The motor is connected through a O-ring to the Wheel. Motor and controls can be remote controlled, hardwired for control by wall switches or integrated with build management system such as Cibus. Colours Standard colours: Snow Withe 062; Black 050; Birch White 412; N. Anodised 020; Rivergum 421. Offered in All Dulux and Interpon powder coat colours, some non standard colours attract a small surcharge. Fabric Available in a large range of colours, textures weight and sizes. Fabrics composition 100% polyester or polymer coated glass fibre. Installation Lateral installation glass strip installation with mounting installation bracket into the glass clearance or frontal installation onto the casement. Limited sizes Roller Blind Drive Max. Surf. m2 Min. Width Max. Width Min. Height Max. Height Chain/Motor 7,5 250 2.900 250 3.000
ROLLER BLIND SYSTEM 5.4. FEATURES VANGUARD Roller Blind System Installation brackets VANGUARD roller blind standard Press formed steel, pre-treated and powder coated. Available in Snow White; Black; Birch White; N. Anodised and Rivergum. The brackets can be installed in vertical or in horizontal position. Installation brackets VANGUARD Roller blind Heavy Duty The installation brackets for the Heavy Duty type are made from high grade stamped steel. Available in all Dulux and Interpon colour. The brackets can be installed in vertical or in horizontal position. Some nonstandard colours attract a small surcharge. SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 7
Block out side guide rails The side guide rails are made of extruded aluminium with drawn- in brush insert and plastic end caps. Double guide rail The intermediate guide rail is made of extruded aluminium and allows two connect two blinds together without light admission.
ROLLER BLIND SYSTEM 5.5 SYSTEMS 5.5.1 EASY-LINK-SYSTEM VANGUARD Roller Blind System This system enables several blinds to be linked for simultaneous operation through a single control. The different blinds where connected by a rod bearing connection. Through this system the number of control chains where reduced. This allows you tho cover multiple of windows or wide windows, where exceed a normal fabric wide. Dimensions SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 9
5.5.2 DUAL-LINK SYSTEM VANGUARD Roller Blind System This VANGUARD Roller Blind System enables several blinds to be linked for simultaneous operation through a single control. The different blinds are connected by a rod bearing connection. Through this system the number of control chains are reduced. This allows you to cover multiple windows or wide windows, which exceed the normal fabric width.
ROLLER BLIND SYSTEM 5.5.3 CORNER SOLUTION VANGUARD Roller Blind System This system allows you to connect two blinds even if a corner is in between. The blind can be operated by one control. The blind can be operated by one control. Is recoended to hold the distance between the wall and foot of bracket (B) to be: 'AC' BRACKET 40 projection: B = 20 'AC' BRACKET 55 projection B = 35 The table specifying the Tube Deductions (A) for Top Fix brackets is based on the above values for B. If B is other than the values above please use the electronic calculation to retrieve the accurate Tube Deduction (A). 1. Measure Wall Length (W1 & W2) ) & the Wall Angle (WA) where the Easy-Link Uni-Joint- 90 deg will be used. 2. Calculate the Tube Deduction (A). (Refer to Blind Deductions Table for further information). 3. Taking into consideration the deductions at the other end of the tubes fort he Chain/Motor/Spring/Crank/Idler/e asy-link/easy Link Uni Joint, vut tubes to desired length. Using the edge of the foot of the bracket as a guide (B) mark on the ceiling where the bracket will be installed SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 11
5.5.4 COMBO SYSTEM VANGUARD Roller Blind System With this system two different Roller blinds where mounted on the same set of brackets, one in the front and one in the rear. Therefore the combination of the blinds fabric can vary on the special requirements. The Combo System can also be used in combination with the Easy Link system.
ROLLER BLIND SYSTEM 5.5.5 Spring assist VANGUARD Roller Blind System With any VANGUARD Roller blind system you can use a spring roller system up to a 45 roller tube. The roller blind system utilized a bidirectional spring, to deliver a smooth and quiet operation. The internal spring lock the blind in a place under tension. Spring Assist units enable large heavy blinds to be operated more easily. The roller blind spring system is totally hidden from the view. SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 13
5.6 Dimensioning and Installation detail VANGUARD Roller Blind System Cassette 87x90 extruded aluminium Roll size Ø 75 Guide rails 54x24
ROLLER BLIND SYSTEM 5.7 TYPES OF COVERING VANGUARD Roller Blind System CHI LIGHT light filtering & flocked block out fabric MATILDA 100% PALM BEACH Light filtering SYNERGY Light colours high opacity, dark colours PREMIUM 24 100% WHITE LIGHT 100% ARCADIA Thickness: 0,28 Basis weight: 190gsm Thickness: 0,3 Basis weight: 300gsm Thickness: 0,3 Basis weight: 290gsm Thickness: 0.3 Basis weight: 300gsm Width: 2000 Thickness: 0,3 Basis weight: 380gsm Thickness: 0,3 Basis weight: 380gsm Width: 2400 Fabric: 30% Polyester, 70% Cotton Thickness: 0,65 Basis weight: 440gsm BEL AIR light colours high opacity, dark colours Fabric: 100% Polyester Jacquard with acrylic coating Thickness: 0,65 Basis weight: 440gsm SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 15
BELMONT Block out and light filtering DAWN 100% MELALEUCA 100% RAINDROP 100% SNOWFLAKE 100% PEARLISED 100% METRO 230 NEWPORT Thickness: 0,65 Basis weight: 440gsm Thickness: 0,36 Basis weight: 380gsm Width: 2000/2400 Thickness: 0,40 Basis weight: 390gsm Width: 2000 Thickness: 0,52 Basis weight: 410gsm Width: 2000 Thickness: 0,48 Basis weight: 380gsm Width: 2000 Thickness: 0,39 Basis weight: 370gsm Width: 2100 Fabric: 100% Polyester with acrylic foam coating Thickness: 0,70 Basis weight: 320gsm Width: 2300 Fabric: 100% Polyester Thickness: 0,35 Basis weight: 190gsm Width: 2500
ROLLER BLIND SYSTEM SERENE SERENE PLAZA PLUS GREENSCREEN METRO 230 NEWPORT BLOCKOUT SIENA URBAN SHADE Fabric: 100% Polyester Thickness: 0,47 Basis weight: 350gsm Fabric: 100% Polyester Thickness: 0,35 Basis weight: 180gsm Fabric: 100% Polyester Thickness: 0,47 Basis weight: 375gsm Width: 2000/2400 Fabric: 100% knitted Polyester Thickness: 0,36 Basis weight: 165gsm Width: 2480 Fabric: 100% Polyester acrylic coated Thickness: 0,60 Basis weight: 380gsm Width: 2300 Fabric: 100% Polyester acrylic foam coated Thickness: 0,50 Basis weight: 330gsm Width: 2500 Fabric: 100% Polyester acrylic coated Thickness: 0,45 Basis weight: 220gsm Width: 2800 Fabric: 100% Polyester acrylic coated Thickness: 0,45 Basis weight: 410gsm SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 17
CAMBRIDGE E-SCREEN ECOVIEW EXTRAVIEW M-SCREEN transparent PLATINUM METALISED to TITANIUM METALISED to LINCSCREEN 6% Fabric: 100% Polyester acrylic coated Thickness: 0,45 Basis weight: 410gsm Width: 2450 Fabric: 36% Fiberglas 64% Vinyl Thickness: 0,52 Basis weight: 452gsm Width: 2500 Fabric: 36% Fibreglass 64% Vinyl Thickness: 0,52 Basis weight: 452gsm Width: 2500/3000 Fabric: 100% PVC coated fibreglass Thickness: 0,50 Basis weight: 400gsm Width: 2500/3000 Fabric: 36% Fibreglass 64% Vinyl Thickness: 0,55 Basis weight: 430gsm Width: 1550/2000/2500/3100 Fabric: 100% Polyester Trevira Thickness: 0,38 Basis weight: 145gsm Width: 2300 Fabric: 100% Polyester Trevira Thickness: 0,21 Basis weight: 90gsm Width: 2300 Fabric: 100% PVC coated Fibreglass Thickness: 0,47 Basis weight: 385gsm Width: 2500
ROLLER BLIND SYSTEM NATTE SIENNA LINCSCREEN 3% ZINCALUM METALISED 5TH AVENUE FLOCKE Fabric: 42% Fibreglass/58% Vinyl Thickness: 0,53 Basis weight: 470gsm Width: 2500 Fabric: 100% Polyester acrylic coated Thickness: 0,60 Basis weight: 380gsm Width: 2800 Fabric: 100% PVC coated Fibreglass Thickness: 0,45 Basis weight: 410gsm Width: 2500 Fabric: 42% Fibreglass, 58% Vinyl Thickness: 0,78 Basis weight: 535gsm Width: 2000 Fabric: 100% Polyester acrylic coating Thickness: 0,80 Basis weight: 475gsm Fabric: 42% Fiberglas, 51% Acrylic, 7% Cotton Flocked backing Thickness: 0,50 Basis weight: 430gsm SUBJECT TO TECHNICAL MODIFICATIONS JANUARY 2010 Page 19