5SK Tractor Loader Backhoe Net Peak Power: 70 kw Net Peak Torque: 8 Nm Operating Weight: WD - 7 609 kg WD - 7 89 kg WORK PRO - 8 5 kg
Shift Productivity into a higher gear Powerful and responsive hydraulics deliver generous lift capacity and breakout to both working ends along with impressive backhoe crowd power and swing torque. As always, our PowerShift transmission provides smooth on-the-go clutch-less gear changes. What s more, a fifth gear makes it even more nimble and quick, providing transport speeds up to 0 km/h. Add Autoshift, and you ll have the smoothest-shifting backhoe available. Already own our J-series Backhoes? Loader, backhoe buckets, as well as front and rear attachments, are compatible with the K-series. Limited-slip mechanical-front-wheel drive delivers up to 65 percent of available power to the wheel with the best traction. Engage it on the fly, for true all-wheel drive when and where you need it. Redesigned cooling package allows coolers to tilt away from the radiator for convenient core clean-out. Ride-control (optional) functions as a shock absorber, smoothing moves over rough terrain. So full loads are more likely to arrive at their destination instead of somewhere in-between. Helps reduce operator fatigue, too. Extendable dipperstick (optional) adds digging depth and reach. Outer-box design firmly clamps cumbersome objects such as timber and concrete slabs between the bucket and gripper teeth while extending or retracting.
Reduced maintenance From the increased bonnet tilt that allows more engine access, to the tilt-coolers that open up the cores the K-series is loaded with features that make it as easy to maintain as it is to operate. Same-side ground-level service points help daily checks and top-ups go more quickly. Other features such as quick-change filters, extended service intervals, simple-to-read sight gauges, and easy-access grease nipples help increase uptime and lower daily operating costs. And because no maintenance beats low maintenance, self-adjusting serpentine belts, park brakes, and wet-disc brakes eldom, if ever, require attention. With the K-series, you ll spend less time and expense getting ready for work and more time getting work done. When you compare routine maintenance costs you ll discover what owners already know it costs less to operate a Bell. Wet-sleeve engine liners provide uniform cooling and increased durability over cast-in-block designs. Totally welded mainframe resists torsional stress, absorbs shock loads, and delivers maximum strength. Simplifies service access to major components, too. Planetary final drives distribute loads over multiple gears for long-term durability. Wide-mouth fuel tank allows fast, ground-level fill ups. Large capacity lets you work longer before refuelling. Vertical spin-on engine, transmission and hydraulic filters as well as quick-release fuel filters allow quick, no-spill changes. 500-hour engine and,000-hour hydraulic oil-service intervals enable K-series Backhoes to work longer between changes. Rear axle bearings self-lubricate, so you ll never have to worry about greasing. Synthetic bushings in the loader linkage and extendable dipperstick replace grease nipples and the greasing that goes with them. Generous swing-torque, boom, and dipperstick lift capacity. Large pins and replaceable bushings deliver long-term durability, and help keep the backhoe and loader tight and digging true. Engine hood is constructed of a resilient composite material that resists impacts and damage; reinforced grille helps protect the coolers. Tight torque-converter match, impressive torque reserve, smooth combined-function metering, and optimum lift-to-crow match make these aggressive and responsive loaders. Convenient colour-coded lube and periodic maintenance chart ensures that nothing gets overlooked. Curved-knee loader-boom design provides superior reach, enabling the K-series to easily dump to the centre of most trucks. For quick and efficient loading. Power Curve boom design begins wide at the base and narrows through the line of sight for unrestricted visibility. Its proven geometry provides smooth and consistent control throughout the digging arc. Backhoe boom, dipperstick, stabilizers and loader are box-constructed of low-alloy steel for maximum strength. Pallet forks (optional) increase machine versatility. The low-profile loader knee is narrower through the line of sight, for a better view of the attachment. Visibility to the forks at truck-bed height is best in class. Worksite Pro quickcoupler (optional) lets you change attachments quickly and easily without leaving your seat. Accommodates a wide variety of attachments. Multi-purpose bucket (optional) offers even more versatility for your jobsite. Wear-resistant alloy-steel cutting edges on working areas ensure long life and trouble-free operation.
5
5SK Tractor Loader Backhoe ENGINE Manufacturer and Model John Deere PowerTech 05T turbocharged, standard Non-Road Emssion Standards EPA Tier / EU Stage II emissions Displacement.5 L Net Peak Power (ISO 99) 70 kw @,000 rpm Net Peak Torque (ISO 99) 87 Nm @,00 rpm Net Torque Rise 5% Lubrication Pressure system with spin-on filter & cooler Air Cleaner Dual-stage dry type with safety element and evacuator valve COOLING Fan Type Engine Coolant Rating Engine Oil Cooler POWERTRAIN Transmission Suction -0 C Oil to water 5-speed, helical-cut gears, full PowerShift transmission with hydraulic reverser standard; electric clutch cutoff on loader lever Torque Converter Single stage, dual phase with.6: stall ratio, 80 mm Maximum Travel Speeds (with 6.9-8 rear tyres) Forward Reverse Gear 5.9 km/h 7. km/h Gear 0.8 km/h.7 km/h Gear.5 km/h. km/h Gear 6. km/h N/A Gear 5 0.0 km/h N/A Axles: Axle Oscillations, Stop to Stop, Front axles deg. Axle Ratings MFWD Non-powered Rear Static 000 kg 8 000 kg 000 kg Dynamic 6 000 kg 7 00 kg 7 000 kg Ultimate 8 00 kg 950 kg 0 600 kg Differentials MFWD Axle Rear Axle Automatic, limited slip traction control Electric, foot-actuated, 00% hydraulical locking Hydrostatic power and emergency steering Steering (ISO 500) Axle Type MFWD Non-powered Curb-Turning Radius With Brakes.58 m. m Without Brakes.08 m.9 m Bucket Clearance Circle With Brakes 0. m 9.89 m Without Brakes.05 m 0.76 m Steering Wheel Turns (lock to lock).7. Final Drives Mechanical-Front Wheel Rear Axle Brakes (SAE J7) Service Parking HYDRAULICS Main Pump Pump Flow @,00 rpm Backhoe Loader System Relief Pressure Backhoe Loader Backhoe Controls Loader Controls Heavy-duty, outboard planetary final drives distribute shock loads over gears Heavy-duty, outboard planetary final drives distribute shock loads over gears Power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalising Spring-applied, hydraulically released, wet, multi disc, independent of service brakes with electric switch control Open center, gear type, tandem with unloader 6 L/min 06 L/min 99 kpa 99 kpa Two-lever manual standard; manual and/or electric auxiliary functions optional Single-lever control with electric clutch cut-off switch standard; manual auxiliary functions (electro-hydraulic control lever) optional CYLINDERS Type Heat-treated, chrome-plated, polished rods; hardened-steel (replaceable bushings) pivot pins Bore Rod Stroke Diameter Loader Boom, () 80 mm 50 mm 790 mm Loader Bucket () 90 mm 50 mm 7 mm Backhoe Boom () 0 mm 56 mm 795 mm Backhoe Crowd () 5 mm 6 mm 6 mm Backhoe Bucket () 90 mm 56 mm 80 mm Heavy-Duty Option () 00 mm 6 mm 80 mm Backhoe Swing () 90 mm 50 mm 78 mm Backhoe Extendable Dipperstick () 70 mm 0 mm 067 mm Backhoe Stabiliser Standard () 70 mm 5 mm 76 mm Non-Powered Axle () 70 mm mm mm Mechanical-Front-Wheel Drive () 67 mm mm 0 mm ELECTRICAL Voltage Alternator Rating Lights OPERATOR STATION Type (SAE J00) OVERALL VEHICLE Mainframe volt 90 amp 6 halogen, front, rear and side docking (, 500 candlepower each), turn signals and flashers, front and rear, stop and taillights and rear reflectors. Cab, isolation mounted, ROPS / FOPS, left/right access, with molded roof. Airconditioner (optional). Unitised one-piece construction TYRES Front Non-Powered Front Axle L-6 SL F- () Mechanical-Front-Wheel Drive.5/80-8 I- (0) Heavy Duty MFWD.5/80-8 AT () Rear Non-Powered Front Axle 6.9-8 R- (0) Mechanical-Front-Wheel Drive 6.9-8 R- (0) Heavy Duty MFWD 7.5-5 L () SERVICEABILITY Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element REFILL CAPACITIES Cooling System Rear Axle Engine Oil (including vertical spin-on filter) Torque Converter and Transmission Fuel Tank (with ground-level fueling) Hydraulic System Hydraulic Reservoir Mechanical-Front-Wheel-Drive Housing Axle Planetary (each) OPERATING WEIGHTS With Full Fuel Tank, Operator, and Standard Equipment WD WD WORK PRO OPTIONS Extendable Dipperstick Front Loader Coupler Backhoe Bucket Coupler 6-micron filtration.9 L 8 L L 5. L 55. L 89. L 7. L 6.5 L 0.9 L 79 kg 7 609 kg 7 89 kg 8 5 kg kg 86 kg 6 kg 6
Specifications OVERALL DIMENSIONS A Ground Clearance (minimum) 5 mm B Overall Length (transport) 5.6 m (folded); 7.50 m (rear) C Stabiliser Spread. m D Height to Top of ROPS/Cab.85 m E Length from Axle to Axle Non-Powered Front axle. m Mechanical-Front-Wheel-Drive Axle. m LOADER DIMENSIONS/PERFORMANCE P Bucket Dump Angle (maximum) 5 deg. Q Rollback Angle at Ground 0 deg. Heavy-Duty Multipurpose Bucket Capacity.00 m.00 m Width 00 mm 7 mm Weight 55 kg 86 kg Breakout Force 5.8 kn.9 kn Lift Capacity (full height) 66 kg 99 kg R Height to Bucket Hinge Pin.0 m.0 m (maximum) S Dump Clearance.6 m.6 m (bucket at 5 deg.) T Reach at Full Height 765 mm 88 mm (bucket at 5 deg.) U Digging Depth Below 06 mm 85 mm Ground (bucket level) V Length From Front Axle.0 m.5 m Centreline to Bucket Cutting Edge CAPACITY WITH QUICK-COUPLER/FORKS A Maximum Height 07 kg B Maximum Reach 6 kg C At Ground Line 5 kg D Below Ground Line mm BACKHOE DIMENSIONS/PERFORMANCE Backhoe specifications are with 60 mm x 0. m bucket Bucket Range Digging Force Bucket Cylinder With Heavy-Duty Cylinder Option Crowd Cylinder Swing Arc Operator Control 05-95 mm 5. kn 67.8 kn 6.0 kn 80 deg. Two levers With Standard With Optional Dipperstick Extendable Dipperstick Backhoe Retracted Extended F Loading Height.58 m.58 m. m (truck loading position) G Reach from Centre of 5.5 m 5.6 m 6.6 m Swing Pivot H Reach from Centre of 6.9 m 7.0 m 8.0 m Rear Axle I Digging Depth.9 m. m 5.9 m (SAE maximum) J Digging Depth (SAE) 60 mm Flat Bottom.7 m.0 m 5. m 0 mm Flat Bottom.96 m.09 m 5. m K Overall Width.9 m.9 m - (less loader bucket) L Side-Shift from 5 mm 5 mm 5 mm Centreline M Wall-to-Swing Centreline 60 mm 60 mm 60 mm N Bucket Rotation 90 deg. 90 deg. 90 deg. O Transport Height.8 m.8 m.8 m Lift capacities are over-end values in kg according to SAE J. Figures listed are 87% of the maximum lift force available. Base vehicle includes counterweight. 5SK Backhoe with Standard Dipperstick 5SK Backhoe with.07 m Extendable Dipperstick, Retracted 5SK Backhoe with.07 m Extendable Dipperstick, Extended 5 5 5 5SK Backhoe with Standard Dipperstick 5 699 569 659 6) 60 998 55 566 WITH 86 BOOM 5 9895SK Backhoe with.07 m Extendable Dipperstick, Retracted 59 0 59 780 WITH BOOM 5 5 8 98 5 5SK Backhoe with.07 m Extendable Dipperstick, Extended 99 99 5 997 99 50 979 67 965 WITH 5 SWING PIVOT 5 699 569 659 6) 60 998 55 566 WITH 86 BOOM AT 65 8 6 BOOM 95 6 5 9 0 SWING PIVOT 989 5 59 5 0 8 59 780 98 WITH BOOM 57 AT 65 7 8 BOOM 50 7 7 0 500 0 SWING PIVOT 99 99 5 997 99 50 979 67 965 WITH BOOM 99 AT 65 9 98 BOOM 906 896 89 90 9 0 METERS 0 5 6 7 METERS 0 5 6 7 METERS 0 5 6 7 7
Features and Options Engine Meets EPA Tier / EU Stage II emissions John Deere Model 05T -.5 litre, net peak power (70 kw) turbocharged, isolation mounted Vertical spin-on engine oil filter Vertical spin-on fuel filter with water separator micron Ultra Fine Diesel Filter Oil-to-water engine oil cooler Antifreeze, -0 C Coolant recovery tank Serpentine belt with automatic belt tensioner Suction-type cooling fan Enclosed safety fan guard High ambient temperature engine cooling Dual-element dry-type air cleaner Muffler, under hood with curved-end exhaust stack Mechanical fuel lift pump Powertrain Powershift transmission: Torque converter with Transmission Control Lever (TCL) twist grip F-N-R, with neutral safety switch interlock ( through gears) 5th gear over-drive Transmission oil cooler Vertical spin-on transmission filter Differential lock, electric foot-actuated Planetary final drives Power assisted hydraulic service brakes (conform to ISO 50): Inboard, wet multi-disc, self-adjusting and self equalising Parking/emergency brake with electric switch control (conforms to ISO 50): Spring applied, hydraulically released wet multi-disc / Independent of service brakes Hydrostatic power steering with emergency manual mode Non-powered front axle Mechanical-front-wheel-drive with traction control limited-slip differential: Electric on/off control / Driveshaft guard / Sealed axle Autoshift transmission Backhoe Standard dipperstick,.9 m digging depth Extendable dipperstick,.07 m extension Heavy-duty backhoe bucket cylinder Two-lever mechanical backhoe controls Backhoe transport lock lever Swing lock pin stored in operator s station Stabilisers with two-direction anti-drift valves Heavy-duty backhoe bucket Auxiliary backhoe valve for hammers, compactors with auxiliary plumbing Loader Loader bucket anti-spill (rollback) Return-to-dig feature Single-lever control with electric clutch cut-off switch Bucket-level indicator Loader boom service lock Ride control Auxiliary loader hydraulics Front loader hydraulic coupler for buckets, forks, etc. High-visibilty loader arms Hydraulic System 6 L/min tandem gear pump, open-centre system Independent hydraulic reservoir O -ring face seal connectors 6-micron vertical spin-on filter Electrical System volt system 90 amp alternator Single battery with 90 min reserve capacity and 950 CCA Positive terminal battery cover Blade-type multi-fused circuits By-pass start safety cover on starter Battery disconnect switch Lights Halogen work lights (6), 500 candlepower each ( front, rear, and side docking) Turn signal/flashing ( front and rear) Rear stop and tail () Rear reflectors () Additional halogen work lights (), front and rear Operator s Station Modular-design ROPS/FOPS level, cab with molded roof (conforms to SAE J00): Isolation mounted Left and right access Slip-resistant steps and ergonomically located handholds (conform to SAE J85) Molded floor mats Headliner Coat hook volt outlets - in cab Built-in beverage holders Built-in Operator s Manual storage compartment Interior rearview mirror outside rearview mirrors Rotary-dial hand throttle Suspended foot throttle Horn Sealed switch module Keyless start Machine security (enabled through monitor) Engine coolant temperature guage, illuminated electronic, with audible warning Oil temperature guage, illuminated electronic, with audible warning Fuel guage, illuminated electronic Digital display of engine hours, engine rpm, and system voltage Monitor system with audible and visual warnings: Engine air restriction / Low alternator voltage / Engine oil pressure / Hydraulic filter restriction / Parking brake on/off / Seat belt / Low brake pressure / Machine diagnostic information via -pushbutton / LCD operator interface Mechanical suspension deluxe fabric swivel seat with lumbar adjustment and armrests (fully adjustable) Air suspension deluxe fabric swivel seat with lumbar adjustment Seat belt, 76 mm, with retractor Cab: Headliner, dome light, left and right cab doors, tinted safety glass, windshield wiper (one rear and one front), front windshield washer, fresh-air intake, heater / defroster / pressuriser (0,000 Btu/hr. [.7 kw] heater), and volt outlets () Air conditioner (6,000 Btu/hr. [7.6 kw] output and CFC-free Ra refrigerant) Overall Vehicle One-piece unitised construction mainframe Vehicle tie-downs ( front and rear) Remote grease bank for front axle 0 kg front counterweight Heavy duty front bumper Rubber grille bumpers Fuel tank, 55 L, ground-level fueling Two-position easy tilt hood Extended grille frame Removable toolbox with padlock latch Vandal protection for locking, engine hood, toolbox, hydraulic reservoir, and fuel tank Reverse warning alarm Sound reduction package Dent-resistant full-coverage rear fenders Rotating beacon light (orange) Standard Equipment Optional Equipment All dimensions are shown in millimetres, unless otherwise stated between brackets. Under our policy of continuous improvement, we reserve the right to change technical data and design without prior notice. Photographs featured in this brochure may include optional equipment. BELL INTERNATIONAL: Tel: +7 (0)5-907 9 E-mail: marketing@bellequipment.com Web: www.bellequipment.com Tel: +6 (0)8-956 0 Tel: + (0)5-55-89--56 Tel: +9 (0)66 / 9--0 Tel: +7 95-87-80-0 Tel: +7 (0)-98-9700 Tel: +-855-9-55 Tel: + (0)8-786 5SK TLB Brochure, Broch75065 - English