CSO/CP Series SAM Engineering (Pty) Ltd. 2 Duncan Road, Lilianton, Boksburg, South Africa Tel: +27 (0) 23 Fax: +27 (0) 2393 Email: pumps@sameng.co.za www.sameng.co.za Alloys to suit all applications Proud Manufacturers of SAMCO Pumps
SAMCO Chemical Process Pumps CSO/CP Series SAMCO Chemical Process Pumps SAM Engineering has a built up reputation in the chemical processing industry for the manufacture and supply of high quality SAMCO process pumps which combine anticorrosive and chemical resistant properties with superior performance capabilities to provide superior benefits compared to traditional cast iron water pumps. CSO/CP Series: Standard Design Features and Options BASIC DESIGN: Fifteen pump sizes are built around three power frames. All parts, excluding the casing, impeller and stuffing box are completely interchangeable within a given frame group. Maximum interchangeability helps reduce stock holding and assists with maintenance planning. OPEN IMPELLER DESIGN: Impellers are designed to balance hydraulic thrust loads, reduce stuffing box pressure and increase bearing life. These impellers provide higher efficiencies and lower NPSH requirements. Expeller vanes at the rear of the impeller further reduce the stuffing box pressure while preventing solids from collecting behind the impeller. BACK PULLOUT DESIGN: The back pullout design of all pumps allows the pipework to remain undisturbed when maintaining the pump unit. SHAFT PROTECTION: All shafts are protected by replaceable sleeves. 1
SAMCO Chemical Process Pumps CSO/CP Series CASING WEAR PLATES (CP ONLY): Pump models F3 upwards are fitted with replaceable casing wear plates, cutting the costs of replacing expensive casings and ensuring correct clearances between wear plate and impeller when replaced. COMPLIMENTARY GASKETS: Materials such as PTFE are standard when harsh chemicals are handled. IMPELLER ADJUSTMENT: Maintained by means of cap screws at the rear of the bearing housing. This feature allows original efficiencies to be maintained. POWER END: Fitted with double row outboard bearings to carry both radial and axial thrust, and a single row inboard bearing to carry radial thrust only. An oil slinger provides a mist of oil to lubricate the bearings. DETACHABLE STUFFING BOX: Pumps are fitted with multiple stuffing box arrangements to offer the end user numerous sealing methods with minimal changes. SHAFT DEFLECTION: Large shaft diameters minimise deflection and increase packing and seal life. VOLUTE CASING: Centre line design allows entrained air or gases to be vented. NOTE: The pump makeup largely depends on the application. Other materials are available on request. MANUFACTURER S ASSISTANCE: For more information on the numerous applications of these pumps, please make use of our factory for further assistance. 2
Technical Information Performance Data CSO PUMPS 2900 Key No. 290 rpm 17 rpm 970 rpm CP PUMPS 2900 Key No. 290 rpm 17 rpm 970 rpm 1. 1x.7x 1x.7x 1. 2. 1.x1x 1.x1x 2. 30 30 3. 3x1.x 3x1.x 3. 0 0. 3x2x 3x2x. 0 0. 1.x1x 1.x1x. 300 300. 3x1.x. 3x1.x. 3x1.x.. 02 02 02 7. 3x2x. 3x2x. 3x2x. 7. 02 02 02. x3x. x3x. x3x.. 02 02 02 9. xx. xx. xx. 9. 02 02 02. 2x1x 2x1x 2x1x. 30 30 30. xx xx xx. 0 0 0 12. 3x1.x 3x1.x 3x1.x 12. 0 0 0. 3x2x 3x2x 3x2x. 0 0 0 1. x3x x3x x3x 1. 0 0 0 1. 3x1.x 3x1.x 3x1.x 1. 0330 0330 0330. 3x2x 3x2x 3x2x. 0330 0330 0330 17. x3x x3x 17. 0330 0330 1. xx xx 1. 0330 0330 19. xx xx 19. 330 330. xx1 xx1. 30 30 21. xx1 xx1 21. 030 030 3
Technical Information Performance Data Feet Metres 970 rpm 0 90 0 70 2 0 0 1 1 17 0 Hertz 30 12 1 1 19 21 7 9 3 0 0 0 0 0 0 00 00 00 00 Cubic metres per hour 0 0 0 0 0 00 00 00 00 00 000 GPM Feet Metres rpm 0 0 0 Hertz 1 0 90 0 0 0 0 30 1 1 12 7 9 17 1 1 19 21 1 2 3 3 0 0 0 0 0 0 00 00 00 00 Cubic metres per hour 0 0 0 0 0 00 00 00 00 00 000 GPM 2900 rpm Feet Metres 00 0 00 300 0 0 0 0 0 30 1 12 7 17 1 1 9 0 0 Hertz 0 0 1 1 2 3 0 0 0 0 0 0 300 00 00 00 Cubic metres per hour 0 0 0 0 0 00 00 00 00 0 GPM
Samco Chemical Process Pumps Frame Sizes Frame foot has only one mounting hole on pump centre line. CP 30.0mm KEY NO. 1. 2. 3.... 7.. 9... 12.. 1. 1.. 17. 1. 19.. 21. 1x0.7x 1.x1x 3x1.x 3x2x 1.x1x 3x1.x. 3x2x. x3x. xx. 2x1x xx 3x1.x 3x2x x3x 3x1.x 3x2x x3x xx xx xx1 xx1 2 3 7 7 3 7 7 0 7 7 7 7 3 3 2 19 2 3 0 2 3 0 7 2 3 0 7 3 0 7 3 F1 F1 F1 F1 F1 F3 F3 F3 F3 F3 F3 F3 F3 F3 F3 F3 F3 F3 F F F FG FG FG FG FG FH FH FH FH FH FH FH FH FH FH FH FH FH FJ FJ FJ 0 0 0 3 3 3 3 2 2 2 2 2 2 2 2 3 3 3 7 7 7 7 7 12 12 12 12 12 12 12 12 12 12 12 12 12 3 3 3 0 0 0 0 0 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 1 2 2 2 0 303 29 29 29 29 2 1 9 9 2 21 72 21 72 77 2 1 3 123 3 129 1 17 12 2 170 229 1 217 22 22 2 2 232 27 39 1 1 1 3. 3. 3. 3. 3. 3 3 3 3 3 1 1 1 1 1 7 7 7 7 7 7 7 7 7 7 7 7 7 1 1 1 170 2 21 279 279 2 33 27 2 31 27 2 31 33 0 7 3 191 191 191 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 12 1 19 19 PUMP SIZE AND TYPE SUCTION DISCHARGE FRAME CP CP CP D E1 E2 F V X Y A G H L U SHAFT DIMENSION WIDTH DEPTH LENGTH O P 731+ 731+ Standard Dimensions Millimetres {F} {L} {CP} {Y} {V} {U} SUCTION MOUNTING HOLES {E1} {E1} {E2} {E2} FRAME FOOT CASING H HOLE {A} {O} {X} {D} {G} {P} DISCHARGE Technical Information Performance Data
Samco Technical Chemical Information Process Pumps Performance Frame Data Sizes Process Pump Construction Data KEY NO. 1. 2. 3.... 7.. 9... CSO / 731+ 1x0.7x 1.x1x 3x1.x 3x2x 1.x1x 3x1.x. 3x2x. x3x. xx. 2x1x xx CP 30 0 0 300 02 02 02 02 30 0 STUFFING BOX DIM. Bore Depth 0mm 0mm 0mm 0mm 0mm Seal Cage Width Packing No./Size /mm /mm /mm /mm /mm /mm /mm /mm /mm /mm /mm Sleeve O.D. 3mm 3mm 3mm 3mm 3mm Mech. Seal Size 3mm 3mm 3mm 3mm 3mm IMPELLER No. Vanes Inlet Area.77cm² 17.2cm² 30.32cm² 7.1cm² 22.90cm² 22.cm² 3.22cm² 70.9cm² 12.cm² 32.2 cm² 3.31 cm² Max. Diameter mm mm mm mm 3mm 2mm 2mm 2mm Min. Diameter 90mm 9mm mm mm 127mm mm mm mm mm mm 17mm Max. Sphere Size 2mm mm mm 12mm mm 9mm 9mm mm mm mm 23mm SHAFT Under Sleeve Dia. 2.mm 2.mm 2.mm 2.mm 2.mm.mm 2mm At Coupling Dia. KEY NO. 12.. 1. 1.. 17. 1. 19.. 21. CSO / 731+ 3x1.x 3x2x x3x 3x1.x 3x2x x3x xx xx xx1 xx1 CP 0 0 0 0330 0330 0330 0330 330 330 0330 STUFFING BOX DIM. Bore mm mm mm Depth 7mm 7mm 7mm Seal Cage Width mm mm mm Packing No./Size /mm /mm /mm /mm /mm /mm /mm /mm /mm /mm Sleeve O.D. 3.mm 3.mm 3.mm Mech. Seal Size 3.mm 3.mm 3.mm IMPELLER No. Vanes Inlet Area 27.09cm².1cm² 9.17cm² 3.0cm².79cm² 1.27cm².1cm² 32.0cm² 12.0cm² 7.0 cm² Max. Diameter 279mm 279mm 279mm 330mm 330mm 330mm 330mm 31mm 31mm 31mm Min. Diameter mm mm 17mm 2mm 2mm 17mm 3mm 21mm 2mm 30mm Max. Sphere Size mm 1mm mm 1mm 17mm 2mm 30mm mm 1mm SHAFT Under Sleeve Dia..mm.mm.mm.mm.mm.mm.mm 7.2mm 7.2mm 7.2mm At Coupling Dia. 2mm 2mm 2mm 2mm 2mm 2mm 2mm 0mm 0mm 0mm
0 1 1 121A 0A 1 1 0 3 7 9 2 1 1 A A Optional Packing for Dynamic Seal 3 0 17 2 1 19 1 12 9 12A 2 Chemical Process Pump CP Series A Catalogue Code Part Name 0 Casing 1 Casing Clamp Ring 1 Wear Plate 1 Impeller 121A Impeller ORing 0 Stuffing Box 0A Dynamic Seal Cover 1 Packing Base Ring 2 Gland 3 Lantern Ring Static Seal Dynamic Seal Housing Expeller A Expeller ORing 7 Static Seal Retaining Ring Static Seal Collar A Static Seal Collar ORing 9 Packing Ring Frame Frame Foot 12 Bearing Housing 12A Bearing Housing ORing Bearing Cap 1 Bearing Housing Circlip 17 Sight Glass 1 Breather 19 Drain Plug Shaft A Keyway Slinger 1 Shaft Sleeve 1 Spacer Sleeve 0 Pump End Bearing 2 Drive End Bearing 3 Bearing Oil Seal Bearing Oil Seal Deflector Deflector 9 Bearing Circlip 7
1 121 0 0A 1 1 0 3 7 2 9 A 1 1 A Optional Packing for Dynamic Seal 0 3 17 2 1 1 19 12 9 Chemical Process Pump CSO Series 12A 2 A Catalogue Code Part Name 0 Casing 1 Casing Clamp Ring 1 Impeller 121A Impeller ORing 0 Stuffing Box 0A Dynamic Seal Cover 1 Packing Base Ring 2 Gland 3 Lantern Ring Static Seal Dynamic Seal Housing Expeller A Expeller ORing 7 Static Seal Retaining Ring Static Seal Collar A Static Seal Collar O Ring 9 Packing Ring Frame Frame Foot 12 Bearing Housing 12A Bearing Housing O Ring Bearing Cap 1 Bearing Housing Circlip 17 Sight Glass 1 Breather 19 Drain Plug Shaft A Keyway Slinger 1 Shaft Sleeve 1 Spacer Sleeve 0 Pump End Bearing 2 Drive End Bearing 3 Bearing Oil Seal Bearing Oil Seal Deflector Deflector 9 Bearing Circlip