Parts Manual for REAR ENGINE RIDER SERIES 16 & 18 MODELS 20816B N20816B 20816BE N20816BE 281016BE 2818BE N281016BE 301016BE 301216BE 3018BE 3316BVE 3318BVE 3316KVE 33118KVE IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 1 SNAPPER INC. ALL RIGHTS RESERVED (Rev., 08/21/02) MANUAL No. 0608
CONTENTS DESCRIPTION PAGE WHEELS, FRONT... 3 WHEELS, REAR... & FRONT END, STEERING...6 & MAIN CASE (Solid Seat Mount)...8 & MAIN CASE (Hinged Seat Mount)...10 & 11 DIFFERENTIAL, R.H. FENDER...12 & CHAIN CASE, L.H. FENDER... & 1 SMOOTH CLUTCH ASSEMBLY...16 & 1 CUTTING DECKS, DEFLECTORS...18 & 1 RAILS, LIFT ARMS, CAM LIFT (Series 16)...20 & 21 RAILS, LIFT ARMS, CAM LIFT (Series 18)...22 & 23 BLADE STOP PEDALS... 2 SPINDLE ASSEMBLY... 2 BELTS, BRAKES, INTERLOCK (2 Models) (Series 16; Early Production)... 26 BELTS, BRAKES, INTERLOCK (28,30 & 33 Mods) (Series 16; Early Production)... 2 BELTS, BRAKES, INTERLOCK (2 Models) (Series 16)...28 & 2 BELTS, BRAKES, INTERLOCK (28, 30 & 33 Models) (Series 16)...30 & 31 BELTS, BRAKES, INTERLOCK (28, 30 & 33 Models) (Series 18)...32 & 33 DRIVE DISC ASSEMBLY... 3 FUEL TANK & OPERATOR S SEAT... 3 ENGINES & EXHAUST MUFFLER... 36 THROTTLE CONTROL... 3 DECALS... 38 thru 1 ELECTRICAL SYSTEMS (For 8 HP Recoil Wiring Diagram)...2 & 3 ELECTRICAL SYSTEMS (For 8, 10, 12 & HP Briggs)... & ELECTRICAL SYSTEMS (For HP Briggs)...6 & ELECTRICAL SYSTEMS (For & 1 HP Kohler)...8 & WIRING SCHEMATICS... 0 thru 3 HARDWARE BAGS... ACCESSORIES AND ATTACHMENTS... MANUAL No. 0608 2 R. E. RIDER SERIES 16 & 18
WHEELS - FRONT 10 1 ASSEMBLY 6 2, 2A 12 3 11 8 1-2268 ASSEMBLY, Front Tire & Rim (Complete) (Includes Items 2, 3,, 6, & 12) -- -226 ASSEMBLY, Front Tire & Rim (Includes Items 2 thru 6) -- -330 FRONT WHEEL, 11.00 x.00 (Includes items 2A thru 6) 2 2-3828 TIRE,.10/3.0 x 2A 2-33 TIRE 11.00/:00 x 3 1-6 RIM (For.10/3.0 x Tire) 1-180 BEARING, Ball 1-223 VALVE, Air (Snap-in) 6 1-66 FITTING Lube 1-03 WASHER, 3/ I.D. 8 1-1022 CAP, Hub 1-1032 SEAL, Felt 10 3-1038 CAP, Dust 11-116 PIN, Cotter /32 x 1" (2) 12 1-0821 TUBE, Inner (For.10/3.0 x Tire) R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608
WHEELS - REAR LEFT HAND 18A 11 16 1 12 18 1 ASSEMBLY 2A, 2B, 2C RIGHT HAND 1 8 10 6 A 3A, 3B, 3C MANUAL No. 0608 R. E. RIDER SERIES 16 & 18
WHEELS - REAR 1-226 ASSEMBLY, Rear Tire & Rim (Includes Items 2A, 3A, ) (2" Models) -- -220 ASSEMBLY, Rear Tire & Rim (Includes Items 2B, 3B, )(28" & 30" Models) -- -261 ASSEMBLY, Rear Tire & Rim (Includes Items 2C, 3C, ) (33" Models) 2A 2-388 TIRE, Std., 16-.80 x 8 (2" Models) 2B 1-68 TIRE, Wide, 16-6.0 x 8 (28" & 30" Models) 2C 2-28 TIRE, Extra Wide, 16-.0 x 8 (33" Models) 3A 1- RIM, Std., (For 16-.80 x 8 Tire) (2" Models) 3B 1-2163 RIM, Wide, (For 16-6.0 x 8 Tire) (28" & 30" Models) 3C 1- RIM, Extra Wide, (For 16/.0 x 8 Tire) (33" Models) 1-223 VALVE, Air (Snap-in) 1-2332 CLAMP, Right Hand (8, 10 & HP) -- 1-2 CLAMP, Right Hand (12, & 1 HP) 6-102 BOLT, 1/2-20 x 3/" Lug (6) 3-132 BOOT, Right Hand (8 & 10 HP) A 1-1 BOOT, Right Hand (12 & HP) 8 1-181 SEAL, Oil -033 HUB, Rear Wheel R. H. (Weldment) 10 2-38 CAP, Hub 11 2-322 CAP, Hub (Left Hand) 12-03 HUB, Rear Wheel L.H. (Weldment) 1-1201 NUT, /16-2 Hex Center Lock 1-103 BOLT, /16-2 x 1-/8" Tapered (Left Hand) 1 1-10 BOLT, /16-2 x 2" Tapered (Right Hand) 16 1-662 SEAL, Oil (Left Hand) 1 1-2332 CLAMP, (Left Hand) (12 & HP) 18 1-68 BOOT, Ball Bearing Models (Left Hand) ( HP Engines) 18A 3-18 BOOT, Standard Models (Left Hand) (8, 10, 12 & HP Engines) R. E. RIDER SERIES 16 & 18 MANUAL No. 0608
FRONT END, STEERING 6 2 2 3 0A 18 (2 & 28 MODELS) 8 3 12 1 10 0 18 (30 & 33 MODELS) 1 16 20 1 1 1* OR 20 1 33* 3* 1 * 38* 31 3 0 20 11 20 20 6 22 30 16 32 23 23 2 26 23 23 22 22 2 2 *NOTE: These parts are used on the 2 model only. MANUAL No. 0608 6 R. E. RIDER SERIES 16 & 18
FRONT END, STEERING 2 & 28 Models 3 36 8 28 8 2 2 2 21 2 3 8 28 2 8 28 1-11 ASSEMBLY, Steering Wheel (Includes Item 2) 2 2-381 DECAL, Snapper 3 1-3862 PIN, 1/ x 1-1/2" Roll 3-3882 LEVER, Park Brake 2-3666 SPRING 6 2-36 KNOB -101 SCREW, #8-32 x 3/8" Cross Recess 8-1018 NUT, #8-32 Hex, Grade 2B -6 ARM, Clutch/Brake (Weldment) 10 2-232 SPACER, Main Tube 11 1-60 PLUG 12 2-366 COVER, Steering Shaft (Foam) 2-361 COVER, Steering Shaft 1-03 WASHER, 3/ Flat 1 1-166 BUSHING, 3/" Steering Shaft 16-11 COTTER-PIN, 3/16 x 1-1/2" (2) 1-16 FRAME, Front (2 & 28 Models) -- -163 FRAME, Front (30 & 33 Models) 18 2-3660 PAD, Foot (Right Side) (2" & 28" Models Shown) -- 2-3663 PAD, Foot (Right Side) (30 & 33" Models Shown) -- 2-36 PAD, Foot (Left Side) (Not Shown, 2" & 28" Models) -- 2-3662 PAD, Foot (Left Side) (Not Shown, 30" & 33" Models) 1 1-06 RING, 3/ Retaining (2) 20 1-086 BEARING, Nylon () 21-260 PIN, Narrow King (Right Side) 22-12 NUT, /16-2 Hex, Gr. () 23-1 WASHER, /16 Split Lock (6) 2 1-3321 BUSHING () 2-260 PIN, Narrow King (Left Side) 26-1683 PIN, Wide King (Right Side), 11.0 Tires 2-168 PIN, Wide King (Left Side), 11.0 Tires 28-116 COTTER-PIN, /32 x 1" (2) 2 2-3 TIE-ROD (30 & 33 Mdls. (2) 30 2-3 PEDAL, Clutch/Brake 31 1-03 RING, /8 Ext. Retaining 32 1-2661 PAD, Clutch/Brake Pedal 33 2-83 SPACER, Pivot 3-81 SHAFT, Steering (Narrow Front End) 3 2-1 TIE-ROD, Left Side (2" & 28" Models) 36 2-16 TIE-ROD, Right Side (2" & 28" Models) 3 2-8332 STUD, 3/8-2 x /8" 38 2-2881 SPACER (2) 3-111 SCREW, /16-18 x 1-1/ Hex Washer Self-Tapping 0-10 CABLE, Brake (Snap-in) 0A 2-23 CABLE, Brake 1 2- CABLE, Clutch 2 3-1 CONNECTOR, Cable 3 - SCREW, 1/-20 x 3/" Hex Head Cap, Grade 2-8 SPACER,.3 x.62 x.1 Sintered Iron -032 NUT, 1/-20 Hex Center Lock 6-13 SHAFT, Steering (Wide Front End) 1-286 HAIRPIN, 1/8 x 2-/16 8-1 WASHER, 3/8 Flat -118 SCREW, 3/8-16 x /8 Hex Washer Self-Tap 0-01 WASHER, 3/8 Flat 1-08 NUT, 3/8-2 Hex Nyloc () R. E. RIDER SERIES 16 & 18 MANUAL No. 0608
MAIN CASE (Solid Seat Mount) 3 6 3 3 1 3 38 36 3 38 3 36 3 2 2 3 33 1 0 31 22 21 20 32 38 3 10 3 3 11 12 3 38 3 3 18 2 2 2 8 16 3 1 38 23 2 30 26 2 1 2 2 28 2 1 MANUAL No. 0608 8 R. E. RIDER SERIES 16 & 18
MAIN CASE (Solid Seat Mount) 1-201 CASE, Main (Standard) 2 3-636 BUMPER, Rear 3 -- FENDER, Left Hand (See Page For Related Parts) 2-80 COVER, Battery 2-8200 SWIVEL (2) 6 2-88 COVER, Switch 3-2 WING, Rear (Models 28, 30 & 33 Only!) (2) 8-08 NUT, /16-18 Hex Flange Lock, Grade (2) -03 SCREW, /16-18 x 3/ Hex Washer Self-Tap () 10 2-366 LINK, Shift (Long) 11-8 ARM, Shift 12 3-3 CROSS BRACE 1-1018 LINK, Shift (Short) -016 NUT, /16-18 Hex (2) 1-08 ARM, Shift Handle 16 1-0 SPRING, Shift Handle 1-1232 DETENT, Shift 18-0 HANDLE, Shift 1 1-06 NUT, /16-2 Hex Flange Lock 20 2-366 KNOB, Shift Handle 21 2-2 CABLE, Deck Support (. ) (2 Models Only!) 22 2-20 BUSHING, Pilot 23-031 WASHER, /16 Internal Tooth Lock 2-003 COTTER-PIN, 3/32 x 3/" 2 2-3 PIN, 1/ x 1-3/" Tapered Clevis 26 1-2 BUSHING, Nylon 2 3-1036 WASHER, Thrust (2) 28 1-26 BUSHING, Nylon (2) 2-0361 SCREW, /16-18 x /8" Hex Washer Self-Tap () 30 1-262 CLIP, Wire (2) 31 3-2 BRACKET, Switch 32-081 SCREW, #10-32 x 1/ Hex Washer Self-Tap (slotted) 33-122 FASTENER, 1/ x 3/ Ratchet (6) 3-106 SCREW, /16-18 x 1-1/2" Hex Washer Self-Tap () 3-1 SCREW, /16-2 x 1-3/" Hex Head Cap, Grade () 36 1-11 RETAINER, /16 Bolt () 3-126 WASHER, /16" Flat () 38-1 WASHER, /16" Split Lock (8) 3-12 NUT, /16-2 Hex, Grade (8) 0 2-286 DRAIN, Oil (Short) (8, 10, & HP Briggs) 1 1-63 GUIDE, Belt (2" Models) -- 3-1 GUIDE, Belt (28 Models) -- 3-618 GUIDE, Belt (30" & 33" Briggs) 2 2-2 ASSEMBLY, Oil Valve (12 HP Briggs & HP Kohler) 3-103 HAIRPIN, 3/32 x 1-1/2 (2) -0206 SCREW, /16-18 x 3/ Hex Head Cap, Grade 2 (2) R. E. RIDER SERIES 16 & 18 MANUAL No. 0608
MAIN CASE (Hinged Seat Mount) 3 3 38 3 38 6 36 2 0 38 3 3 32 38 1 3 3 8 36 36 31 2 1 2 3 22 21 3 33 0 20 6 38 10 3 3 38 1 3 3 2 18 2 2 3 11 12 2 2 26 1 16 2 30 38 23 2 2 MANUAL No. 0608 10 R. E. RIDER SERIES 16 & 18 8 3 28 1
MAIN CASE (Hinged Seat Mount) 1-200 CASE, Main (12, & HP Briggs) -- -202 CASE, Main ( & 1 HP Kohler) 2 3-636 BUMPER, Rear 3 -- FENDER, Left Hand (See Page For Related Parts) 2-80 COVER, Battery 1-06 NUT, /16-2 Hex Flange Lock 6 2-88 COVER, Switch 3-2 WING, Rear (Models 28, 30 & 33 Only!) (2) 8-08 NUT, /16-18 Hex Flange Lock, Grade (2) -03 SCREW, /16-18 x 3/ Hex Washer Self-Tap () 10 2-366 LINK, Shift (Long) 11-8 ARM, Shift (Weldment) 12 3-3 CROSS BRACE 1-1018 LINK, Shift (Short) -016 NUT, /16-18 Hex (2) 1-08 ARM, Shift Handle (Weldment) 16 1-0 SPRING, Shift Handle 1-1232 DETENT, Shift (Weldment) 18-0 HANDLE, Shift (Weldment) 1 2-33 SWITCH, Seat 20 2-366 KNOB, Shift Handle 21 3-2 BRACKET, Switch 22 2-20 BUSHING, Pilot 23-031 WASHER, /16 Internal Tooth Lock 2-003 COTTER-PIN, 3/32 x 3/" 2 2-3 PIN, 1/ x 1-3/" Tapered Clevis 26 1-2 BUSHING, Nylon 2 3-1036 WASHER, Thrust (2) 28 1-26 BUSHING, Nylon (2) 2-0361 SCREW, /16-18 x /8" Hex Washer Self-Tap () 30 1-262 CLIP, Wire (2) 31 2-2 DRAIN, Oil (1/ Turn) (12 HP Briggs & & 1 HP Kohler) 32-62 BOLT, M8-1.2 x 2mm Hex Head Self-Tap 33-122 FASTENER, 1/ x 3/ Ratchet (6) 3-106 SCREW, /16-18 x 1-1/2" Hex Washer Self-Tap () 3-1 SCREW, /16-2 x 1-3/" Hex Head Cap, Grade () 36 1-11 RETAINER, /16 Bolt () 3-126 WASHER, /16 Flat () 38-1 WASHER, /16" Split Lock (8) 3-12 NUT, /16-2 Hex, Grade (8) 0-1080 SCREW, #10-32 x 1/ Hex Washer Self-Tap (2) 1 3-618 GUIDE, Belt (12, & Briggs) -- 3-61 GUIDE, Belt ( & 1 HP Kohler) -- 3-1 GUIDE, Belt ( HP 28 Deck) 2-0238 SCREW, /16-2 x 1 Hex Head Cap, Grade () 3 3-03 PLATE, Engine* 2-8200 SWIVEL (2) *NOTE: ITEM 3 IS USED ON HP 3-66 PLATE, Seat KOHLER ENGINES ONLY! 6 2-866 PIN, Hinge -0360 COTTER-PIN, 1/16 x 3/ 8 2-80 CUSHION -380 SPRING, Seat (Operator Presence Control) 0-0 SCREW, 1/-20 x /8 Self-Tapping, Truss Head, Torx 1-12 WASHER, 1/ I.D. Flat (2) 2 2-286 DRAIN, Oil (Short) (8, 10, & HP Briggs) 3-103 HAIRPIN, 3/32 x 1-1/2 (2) -0206 SCREW, /16-18 x 3/ Hex Head Cap, Grade 2 (2) R. E. RIDER SERIES 16 & 18 11 MANUAL No. 0608
DIFFERENTIAL, R. H. FENDER 2 2 1 2 2A 26 6 3 6 23 22 32 21 8 2 10 3 28 11 12 1 28 2 33 2 30 31 20 16 1 3 18 16 1 MANUAL No. 0608 12 R. E. RIDER SERIES 16 & 18
DIFFERENTIAL, R. H. FENDER 1 1-01 COLLAR, Lock (Includes P.N. -0201, /16-18 x /16 Setscrew) 2 1-8822 BALL BEARING, Axle (Right Hand Fender) (10, 12, & HP Models) 2A 1-226 BEARING, Axle (Right Hand Fender) (8 & 10 HP Models) 3 1-06 NUT, /16-2 Hex Flange Lock 3-10 WASHER, Thrust 3-806 PLATE, Differential 6 2-211 SPACER, Pinion () 2-112 GEARS, Differential Pinion () 8 1-102 WASHER, Thrust -18 ASSEMBLY, Drive Hex Tube 10 1-088 WASHER, Hex Nylon Splash (3) 11 1-06 GEAR, 11 Teeth-10 Pitch 12 1-01 CHAIN, 6 Pitch (No. 3) 2-112 SPROCKET 1-06 RING, External Retaining 1 2-1128 SPACER 16 1-2332 CLAMP, Boot (2) 1 1-083 BOOT, Oil Seal 18 1-102 PLUG, Oil Fill & Check 1 3-2 CASE, Transmission 20 2-862 GASKET, Transmission Case 21 3- FENDER, Right Hand (33 Ball Bearing Differential Models) (2.8 hole) -- 3-280 FENDER, Right Hand (2 & 28 Bushing Differential Models) (1.62 hole) 22 2-118 GEAR, 63 Teeth-10 Pitch 23-63 AXLE, Long (Includes Gear) (Use Only With Short Axle P.N. -38) 2 1-1026 SPACER 2-38 AXLE, Short (Includes Gear) (Use Only With Long Axle P.N. -63) 26 1-2333 SCREW, /16-2 x 1-/8" Hex Cap Special Lock () 2 1-116 O-RING, /16 (2) 28 1-182 WASHER, /16 Belleville (2) 2-03 WASHER, /16 External Tooth Lock 30-0188 WASHER, /16 Flat 31 1-102 BOLT, /16-2 x 2-/8" Idler 32-0361 SCREW, /16-18 x /8" Hex Washer Self-Tap (11) 33-0362 SCREW, 1/-20 x /8" Hex Washer Self-Tap () 3 3-210 SPACER, Short Axle 3 6-101 GREASE, Transmission (2 oz. Required) -- 6-011 KIT, Differential (Includes 2A & 3-280 Fender) -- 6-0662 KIT, Differential (Includes items 2 & 3- Fender) R. E. RIDER SERIES 16 & 18 MANUAL No. 0608
CHAIN CASE, L. H. FENDER 2 1 16 28 31 6 1 ASSEMBLY 31 28 10 8 12 10 11 22 20 1 26 30 1 23 2 2 22 2 32 33 21 2 18 MANUAL No. 0608 R. E. RIDER SERIES 16 & 18
CHAIN CASE, L. H. FENDER 1-2683 ASSEMBLY, Chain Case (Includes items 2 thru, 1, 16, & 31 thru 3) 2-16 CASE, Sprocket 3 2-861 GASKET, Case Cover 1-1121 WASHER,.60 I.D. Belleville (2) 1-06 BEARING, Ball (2) 6 1-863 SPROCKET & SHAFT 1-06 KEY, 1/8 x /8" Woodruff 8 3-8 COVER, Chain Case 1-02 BEARING, Needle (2) 10 1-1086 WASHER, Nylon Thrust (2) 11-03 HUB & SPROCKET 12 1-01 CHAIN -030 SCREW, #10-2 x /8" Hex Washer Self-Tap (10) 1-102 PLUG, Oil Fill & Check 1 2-28 ROLLER 16 1-06 RING, 1/2 Heavy Duty External Retaining 1 3-28 FENDER, Left Hand (2 & 28 Models) (1.628 I.D. hole) -- 3-8 FENDER, Left Hand (33 Models) (1. I.D. hole) 18 1-62 COLLAR, Lock (Includes #-06 Setscrew 1/-20 x 1/") (Used with ball bearing, item 32, only) 1-018 BEARING, Left Hand Fender (Includes Item 20) (8, 10, & 12 HP Models) 20 1-332 FITTING, Lube 21 1-100 ROD, Cross-Tie 22 1-2332 CLAMP, Boot (2) 23 1-08 BOOT, Oil Seal 2 1-101 WASHER, Thrust Nylon 2 1-102 WASHER, Thrust 26-10 NUT, /8-18 Hex Nyloc () 2 1-06 NUT, /16-2 Hex Flange Lock 28 1-260 O-RING (2) 2 2-3 SPACER 30 1-221 WASHER, Shim (As Required) 31 2-81 WASHER, Shim (6) 32 1-62 BALL BEARING, Left Hand Fender (33 Models) -- -1 ASSEMBLY, Left Hand Fender (Includes P.N. 3-8 Fender & P.N. 1-62 Bearing) (12, & 1 HP Models) 33 6-101 GREASE, Transmission (Use 2 oz. maximum) NOTE: SEE PAGES 16 & 1 FOR ILLUSTRATION OF BRAKE LEVER ASSEMBLY AND RELATED PARTS. R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608
SMOOTH CLUTCH ASSEMBLY 1 23 1 CLUTCH CABLE ATTACHMENT HOLE 1 16 20 16 21 21 1 18 22 11 10 2 1 ASSEMBLY 3 6 8 12 SILHOUETTE OF BRAKE CABLE See Page 6 MANUAL No. 0608 16 R. E. RIDER SERIES 16 & 18
SMOOTH CLUTCH ASSEMBLY 1-31 ASSEMBLY, Smooth Clutch (Includes Items 2 thru 6) 2-23 HUB, Driven Disc 3-3103 DISC, Driven 1-23 WASHER, Thrust 3-2331 PLATE, Drive Disc 6-08 NUT, /16-18 Hex Flange Lock () -2 ASSEMBLY, Brake Lever (Includes Brake Lining & Rivet) 8 1-23 RING, 3/8 External Retaining -0303 NUT, 1/-28 Hex Top Lock 10-12 WASHER, 1/ Flat (3) 11 1-016 SPACER 12-10 SCREW, 1/-28 x 1" Hex Head Cap, Grade (Washer Face) 2-231 SPRING, Brake Return 1-226 SPRING, Clutch Brake 1 3-322 LIFT, Yoke 16 1-108 BEARING, Yoke (2) 1 1-1201 NUT, /16-2 Hex Center Lock (2) 18-0238 SCREW, /16-2 x 1" Hex Head Cap, Grade (2) 1-118 SCREW, 3/8-16 x /8" Hex Washer Self-Tap 20 3-321 COLLAR, Yoke 21 1-163 WASHER, /16 Flat (2) 22 3-2 ARM, Yoke 23-108 SCREW, 1/-20 x 3/8" Hex Washer Self-Tap (2) R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608
CUTTING DECKS, DEFLECTORS 1, 1A (see page 1) 3 22 32 30 26 2 28 33 2 2 31 1 2 RAILS & LIFT ARMS ASSEMBLY (See Pages 20 Thru 23) 3 33 21 31 21 23 3 SILHOUETTE OF BLADE ENGAGE- MENT ASS Y. (For Parts Breakdown see Pages 26-33) 12 16 11 10 38 3 2 (30 Deck) 6 2 0 20 1 36 1 20 3 1 SILHOUETTE OF SPINDLE ASS Y. (See Page 2 For Parts Breakdown) 1 8, 1 3 SILHOUETTE OF BLADES, ITEM 2 6 18 NOTE: Blade part number appears On blade. NOTE: The 2, 28 and 33 decks are round. The 2 deck has no square rib on top. MANUAL No. 0608 18 R. E. RIDER SERIES 16 & 18
1 Note backward L shaped slot. 1A CUTTING DECKS, DEFLECTORS Note straight slot. NOTE: The two types of spindle covers are not inter-changable. 1 2-8 COVER, Spindle 1A 3-80 COVER, Spindle 2 6-16 DECK, 2 (Painted w/decals) -- 6-10 DECK, 28 (Painted w/decals) -- 6-11 DECK, 30 (Painted w/decals) -- 6-12 DECK, 33 (Painted w/decals) 3 6-080 KIT, Air Lift (2, 28 & 33 Deck) (incl. items thru ) -- 6-03 KIT, Air Lift (30 Deck) (incl. items thru ) 3-23 AIR-LIFT (2) (2, 33 Deck) -- 3-12 AIR-LIFT (2) (30 Deck) -0228 SCREW, /16-2 x 11/16 Machine (6) 6-031 WASHER, /16 Internal Tooth Lock (6) -0223 NUT, /16-2 Hex (6) 8-2 DEFLECTOR, 28 /33 Discharge (incl. item ) 2-6831 DECAL, Danger 10 3-380 HINGE, Deflector (16 long) -- 2-6 HINGE, Deflector (8 long) 11 1-631 SPRING, Hinge (use with 2-623 Pin) -- 1-628 SPRING, Hinge (use with 2-686 Pin) 12 2-623 PIN, Hinge ( L-shaped) (16-1/ long) -- 2-686 PIN, Hinge (straight) (8-/8 long) -100 NUT, /16-18 Hex Flange Lock 2-683 NUT, 1/ Push (2) 1-16 DEFLECTOR, Discharge (2 Deck) (incl. item ) -- -08 ASS Y, Discharge (2 Deck) (incl. items thru 12, & 1) 16-23 DEFLECTOR, 30 Discharge 1-126 WASHER, /16 Flat (2) 18-032 SCREW, 1/2-20 x 1 Hex Head Cap, Grade (2) 1-00 WASHER, 1/2 Internal Tooth Lock (2) 20-0 Nut, 1/2-20 Hex Jam (2) 21-108 BOLT, /16-18 x 3/ Short Neck Carriage, Grade (2) 22-1016 SCREW, 1/-20 x /8 Hex Washer Self-Tap () 23-110 BOLT, /16-18 x 1/2 Hex Washer Self-Tap Gr. (3) 2-12 BOLT, /16-18 x 1/2 Hex Flange Lock (2) 2-06 NUT, 3/18-16 Hex Flange Lock () 26 3-30 BRACKET, Gage Wheel (Front) (28 & 33 Decks) 2-132 SCREW, 3/8-2 x 3-3/ Hex Head Cap, Grade (3) 28 1-10 WHEEL, Gage (3) 2 1-22 SPACER (3) 30-118 NUT, 3/8-2 Hex Nyloc (3) 31 3-31 BRACKET, Gage Wheel (Rear) (2) (28 & 33 Decks) 32-031 BOLT, /16-18 x 1/2 Carriage (6) for 28 & 33, (8) for 30 Deck 33-100 NUT, /16-18 Hex Flange Lock (8) for 28 & 33, (10) for 30 Deck 3-101 SCREW, 1/-20 Hex Washer Self-Tap (2) 3-02 WING-NUT, /16-18 (2) 36-0612 BOLT, 3/8-16 x 3/ Hex Flange Lock (3) 3 1-668 COVER, 2 Mulcher -- 1-683 COVER, 28 Mulcher -- 1-68 COVER, 33 Mulcher 38-083 NUT, 1/-20 Hex Flange Lock Grade 3-08 BOLT, 1/-20 x 1/2 Hex Flange Lock 0 3-02 BRACKET, Anti-Scalp, 30 R.H. 1 3-026 BRACKET, Anti-Scalp, 30 L.H. 2 3-3 BRACKET, Anti-Scalp, 30 L.H. 3 3-60 BRACKET, Anti-Scalp, 30 R.H. 2-63 BLADE, Ninja 28 -- 2-66 BLADE, Ninja 30 -- 2-1 BLADE, Ninja 33 -- 2-3 BLADE, Ninja 2 1-66 BLADE, 2 Mulcher -- 1-680 BLADE, 28 Mulcher -- 1-682 BLADE, 33 Mulcher 6 3-61 2 BLADE (High Lift) -- 3-63 28 BLADE (High Lift) -- 1-806 30 BLADE -- 3-168 33 BLADE (High Lift) 1-18 2 BLADE -- 1-1 28 BLADE -- 1-23 33 BLADE R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608
RAILS, LIFT ARMS, CAM LIFT (2, 28, 30 & 33 Models) (Series 16) 16 0 8 20 0 20 31 31 2 28 33 1 6 3 28 2A 3 32 2 3 38 3 1 3 36 1 1 8 21 2 21 2 18 23 6 3 26 10 3 2B 1 26 22 1 30 21 2 2 11 12 A, B 2 3 MANUAL No. 0608 20 R. E. RIDER SERIES 16 & 18
RAILS, LIFT ARMS, CAM LIFT (2, 28, 30 & 33 Models) (Series 16) 1-8 ARM, Rear Lift (2 Deck Only) 2 1-6122 ROD, Leveling 3 3-63 QUADRANT, Lift Lever 2- SPRING, Extension 2-88 LEVER, Lift 6 3-1838 BRACE, Top 3-18 GUIDE, Belt 8 3-18 RAIL, Left Hand A 3-630 RAIL, R.H. (2 Deck) B -388 RAIL, R.H. (28, 30 & 33 Decks) 10-032 SCREW, 3/8-16 x 1 Hex Washer Self-Tap 11-068 ARM, Front Lift, Adjustable 12 2-21 ROD, Support (Front Lift Arm to Front End) 1-8 SNAP RING, /16 External 3-3008 ARM, Leveling 1 2-368 GRIP, Height Adjustment Lever 16-1001 SCREW, /16-18 x /8 Truss Head Self-Tap (Torx) (2) 1-036 PIN, 1/8 x 3/ Cotter 18 2-0 HUB, Deck Lift 1 2-63 COVER, Height of Cut 20-08 NUT, 3/8-2 Hex Nyloc 21-18 SCREW, 3/8-16 x Hex Washer Self-Tap (6) 22-0361 SCREW, /16-18 x /8 Hex Washer Self-Tap 23-116 BOLT, /16-2 x 1-/8 Tapered Axle 2-080 NUT, /16-2 Hex Flange Lock 2 1-30 PIN, 3/16 x 1 Roll 26 1-206 RING, Red (2) 2 2-2 CABLE, Rear Deck (. ) 28 2-2112 RING, White (2) 2A 2-62 BRACKET, Deck Lift (2 Deck Only!) 2B 3-6 BRACKET, Lift Assist (28, 30 & 33 Decks) 30 3-2 ARM, Front Lift-Left (30 & 33 Decks) 31 3-2 PIVOT, Leveling 32-108 SCREW, 1/-20 x 3/ Hex Washer Self-Tap 33-08 PIN, 3/16 x 3/ Roll 3 1-10 SPRING, Latch 3-0 LATCH 36 2-6286 GRIP, Lift Latch 3 1-1021 PIN, 1/ x 1-1/ Clevis 38-0360 COTTER-PIN, 1/16 x 3/ 3-03 COTTER-PIN, 3/16 x 1-1/2 0-088 SCREW, /16-18 x 1/2 Hex Washer Self-Tap 1-1016 SCREW, 1/-20 x /8 Hex Washer Self-Tap 2-0606 BOLT, /16-18 x /8 Hex Flange Lock (3) 3-08 NUT, /16-18 Hex Flange Lock(3) -0122 WASHER, 3/8 Flat -162 ARM, Rear Lift (28, 30 & 33 Decks) 6 1-2068 RING, Blue 2-8200 SWIVEL 8 2-8021 COVER, Chain -103 HAIRPIN, 3/32 x 1-1/2 0 2-828 HOOK, Chain (2) 1-08 BOLT, 1/-20 x 1/2 Hex Flange Lock 2-083 NUT, 1/-20 Hex Flange Lock 3 3-8 ECCENTRIC -03 COTTER-PIN, 3/16 x 3/ R. E. RIDER SERIES 16 & 18 21 MANUAL No. 0608
RAILS, LIFT ARMS, CAM LIFT (28, 30 & 33 Models) (Series 18) 0 16 20 0 8 31 20 31 1 28 2 33 1 6 3 28 3 3 38 36 1 32 18 3 8 21 2 2 2 23 1 2A 21 3 6 3 10 22 8 6 26 3 2B 1 26 1 30 A, B 2 21 11 12 0 2 3 2 MANUAL No. 0608 22 R. E. RIDER SERIES 16 & 18
RAILS, LIFT ARMS, CAM LIFT (28, 30 & 33 Models) (Series 18) 1-8 ARM, Rear Lift (2 Deck Only) 2 1-6122 ROD, Leveling 3 3-63 QUADRANT, Lift Lever 2- SPRING, Extension 2-88 LEVER, Lift 6 3-1838 BRACE, Top 3-18 GUIDE, Belt 8 3-18 RAIL, Left Hand A 3-630 RAIL, R.H. (2 Deck) B -388 RAIL, R.H. (28, 30 & 33 Decks) 10-032 SCREW, 3/8-16 x 1 Hex Washer Self-Tap 11-068 ARM, Front Lift, Adjustable (30 & 33 Decks) 12 2-21 ROD, Support (Front Lift Arm to Front End) 1-8 SNAP RING, /16 External 3-3008 ARM, Leveling (2 Deck) 1 2-368 GRIP, Height Adjustment Lever 16-1001 SCREW, /16-18 x /8 Truss Head Self-Tap (Torx) (2) 1-036 PIN, 1/8 x 3/ Cotter 18 2-0 HUB, Deck Lift 1 2-63 COVER, Height of Cut 20-08 NUT, 3/8-2 Hex Nyloc 21-18 SCREW, 3/8-16 x /8 Hex Washer Self-Tap (6) 22-0361 SCREW, /16-18 x /8 Hex Washer Self-Tap 23-116 BOLT, /16-2 x 1-/8 Tapered Axle 2-080 NUT, /16-2 Hex Flange Lock 2 1-30 PIN, 3/16 x 1 Roll 26 1-206 RING, Red (2) 2 2-2 CABLE, Rear Deck (2 Deck) 28 2-2112 RING, White (2) (2 Deck) 2A 2-62 BRACKET, Deck Lift (2 Deck Only!) 2B 3-6 BRACKET, Lift Assist (28, 30 & 33 Decks) 30 3-2 ARM, Front Lift-Left (30 & 33 Decks) 31 3-2 PIVOT, Leveling 32-108 SCREW, 1/-20 x 3/ Hex Washer Self-Tap 33-08 PIN, 3/16 x 3/ Roll 3 1-10 SPRING, Latch 3-0 LATCH (Weldment) 36 2-6286 GRIP, Lift Latch 3 1-1021 PIN, 1/ x 1-1/ Clevis 38-0360 COTTER-PIN, 1/16 x 3/ 3-03 COTTER-PIN, 3/16 x 1-1/2 0-088 SCREW, /16-18 x 1/2 Hex Washer Self-Tap 1-1016 SCREW, 1/-20 x /8 Hex Washer Self-Tap 2-0606 BOLT, /16-18 x /8 Hex Flange Lock (3) 3-08 NUT, /16-18 Hex Flange Lock(3) -0122 WASHER, 3/8 Flat -162 ARM, Rear Lift (28, 30 & 33 Decks) 6 1-2068 RING, Blue 2-8200 SWIVEL 8 2-8021 COVER, Chain -103 HAIRPIN, 3/32 x 1-1/2 0 2-828 HOOK, Chain (2) 1-08 BOLT, 1/-20 x 1/2 Hex Flange Lock 2-083 NUT, 1/-20 Hex Flange Lock 3 3-8 ECCENTRIC -03 COTTER-PIN, 3/16 x 3/ 3-223 ANCHOR 6-0233 SCREW, /16-2 x 3/ Hex Head Cap, Grade (2-031 WASHER, /16 Internal Tooth Lock (2) 8-0223 NUT, /16-2 Hex (2) -323 ASSEMBLY, Clutch Plate R. E. RIDER SERIES 16 & 18 23 MANUAL No. 0608
BLADE STOP PEDALS 10 1 6 2 3 8 1 3-0 PEDAL, Blade Stop Control 2 3-66 SPRING, Latching 3 1-8 SPRING, Pedal 1- BOLT, 3/8-2 x 3/" Shoulder 1-6 BOLT, 3/8-2 x /16" Shoulder 6 1- ECCENTRIC, Leveling -0122 WASHER, 3/8 Flat 8-020 WASHER, 1/2 Flat (2) -028 NUT, 3/8-2 Hex Center Lock 10-030 WASHER, 3/8 Internal Tooth Lock MANUAL No. 0608 2 R. E. RIDER SERIES 16 & 18
1 ASSEMBLY 3 SPINDLE 2 6 NOTE: Spindle housing assembly, Part no. -066 includes Items and. 3 12 12 8 10 11 1-31 ASSEMBLY, Spindle Housing (Includes Items 2 Thru ) 2 1-21 RING, 1.8 Internal Retaining (2) 3 1-33 BEARING, Spindle (2) -060 WELDMENT, Spindle Housing 1-081 FITTING, Lube (for 3/16 diameter hole) 6-8 SPINDLE, Rider (10.32 overall length) 1-03 WASHER, 3/ Shim 8 1-0 WASHER, Spindle 3-1 HOLDER, Blade 10-82 SPACER, Blade Centering 11-036 NUT, /8-18 Hex Center Lock 12-01 SCREW, 1/2-20 x 1-1/ Hex Head Cap, Grade (2) -13 NUT, 1/2-20 Hex Jam (2) R. E. RIDER SERIES 16 & 18 2 MANUAL No. 0608
BELTS, BRAKES, INTERLOCK (2 MODELS) (Series 16; Early Production) 1 2 3 2 26 22 2 20 21 30 28 2 3 1 23 31 8 6 1 18 2 11 32 33 30 10 12 1 ITEM 26 HANDLE P.N. 3-8 ITEM 30 SCREW P.N. -181 AUTOMATIC BLADE STOP (ABS) ASSEMBLY ITEM 31 BRACKET P.N. 3-86 11 12 ITEM 2 SWEEP P.N. -2880 ITEM 28 SPOOL P.N. -2 ITEM 33 LATCH ASS Y. P.N. -321 1 2-222 BELT, Drive (2.2 AA Section) 2 1-002 NUT, 3/-16 Hex Jam 3 3-202 WASHER,/6x1-1/2 Flat (2) 1-881 PULLEY, Spindle 1-20 HUB, Pulley 6-11 SCREW, 3/8-2 x 1-3/ Hex Head Cap, Grade -1 WASHER, 3/8 Flat 8 2-62 PULLEY, Idler 3-2111 RESTRICTOR, Belt 10-8 ARM, Idler 11-118 NUT, 3/8-2 Hex Nyloc (2) 12 1-00 RING, 2 External Retain (2) 1-0 WASHER, Spindle -003 PIN, 3/32 x 3/ Cotter (2) 1 3-621 SPRING 16 1-3 SPACER 1 3-38 DRUM, Brake 18 1-30 PIN, 1/ x 1-/8 Clevis 1 3-82 BAND, Brake 20-0122 WASHER, 3/8 Flat 21-00 WASHER, 1/ Flat 22-10 HAIRPIN, /6 x 1-3/16 23 3-600 BRACKET, Brake Anchor 2 1-6 STUD (3/8-2 Thread) 2 3-1 CABLE & SPRING, Clutch Assembly 26-802 HANDLE, Blade Lever (ON- OFF) 2-2880 SWEEP, ABS 28-2 SPOOL 2-381 SPRING, ABS Return Latch 30-181 SCREW, 1/-20 x /8 Hex Washer Head Self-Tap () 31 3-86 BRACKET, Interlock Switch 32 2-33 SWITCH, Deck Interlock 33-321 ASSEMBLY, Clutch Latch 3 2-36 GRIP, Handle MANUAL No. 0608 26 R. E. RIDER SERIES 16 & 18
6 1 1 BELTS, BRAKES, INTERLOCK (28, 30, 33 MODELS) (Series 16; Early Production) 3 2 28 30 11 8 8 1 18 22 1 23 21 20 2 2 32 26 2 2 6 3 3 3 33 31 3 36 10 1 11 6 16 12 ITEM 2 HANDLE P.N. 3-8 ITEM 3 SCREW P.N. -181 ITEM 30 SWEEP P.N. -2880 ITEM 32 SPOOL P.N. -2 ITEM 3 BRACKET P.N. 3-86 ITEM 36 LATCH ASSEMBLY P.N. -321 AUTOMATIC BLADE STOP (ABS) ASSEMBLY 1-63 BELT, Drive (.18 L Sect.) 2 1-002 NUT, 3/-16 Hex Jam 3 3-202 WASHER,/6x1-1/2 Flat (2) 1-881 PULLEY, Spindle 1-20 HUB, Pulley 6-01 NUT, 3/8-2 Hex, Grade 2 (3) 2-62 PULLEY, Idler 8 - SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade (2) 3-28 BRACKET, Fixed Idler 10 3-626 BRACE 11-088 SCREW, /16-18 x 1/2 Hex Washer Head Self-Tap () 12 1-0 WASHER, Spindle 1-00 RING, 2 External Retain (2) -003 PIN, 3/32 x 3/ Cotter (3) 1 3-621 SPRING 16-8 ARM, Idler 1 1-3 SPACER 18 1-8 IDLER, -1/8 Flat 1-1 WASHER, 3/8 Flat (2 20 3-38 DRUM, Brake 21 1-30 PIN, 1/ x 1-/8 Clevis 22 3-82 BAND, Brake 23-0122 WASHER, 3/8 Flat 2-00 WASHER, 1/ Flat 2-0118 WASHER, 3/8 Split Lock 26 3-600 BRACKET, Brake Anchor 2 1-6 STUD (3/8-2 Thread) 28 3-1 CABLE & SPRING, Clutch Assembly 2-802 HANDLE, Blade Lever (ON- OFF) 30-2880 SWEEP, ABS 31 2-36 GRIP, Handle 32-2 SPOOL 33-381 SPRING, ABS Return Latch 3-181 SCREW, 1/-20 x /8 Hex Washer Head Self-Tap () 3 3-86 BRACKET, Interlock Switch 36-321 ASSEMBLY, Clutch Latch 3 2-33 SWITCH, Deck Interlock MANUAL No. 0608 2 R. E. RIDER SERIES 16 & 18
BELTS, BRAKES, INTERLOCK (2 MODELS) (Series 16) 1 22 2 2 23 1 1 20 21 30 2 31 28 2 3 2 12 16 1 8 2 2 11 26 32 6 10 2 21 18 MANUAL No. 0608 28 R. E. RIDER SERIES 16 & 18
BELTS, BRAKES, INTERLOCK (2 MODELS) (Series 16) 1 2-222 BELT, Drive (2. AA Section) 2 1-881 PULLEY, Spindle 3 2-62 PULLEY, Idler 3-2111 RESTRICTOR, Belt -8 ARM, Idler (weldment) 6 1-20 ROD, Idler -2 HANDLE, Blade Lever (On-Off) (weldment) 8 2-36 GRIP, Handle 1-82 SWITCH, Deck Interlock 10 3-8021 MOUNT, Handle 11 1-168 SPRING, Blade Handle 12 1-3 SPACER 1-00 RING, 2 External Retaining (2) 3-38 DRUM, Brake 1 3-82 BAND, Brake 16 1-30 PIN, 1/ x 1-/8" Clevis 1-63 SPRING 18-0362 SCREW, 1/-20 x /8" Hex Washer Self-Tap (2) 1 1-20 HUB, Pulley 20-0122 WASHER, 3/8 Flat 21-00 WASHER, 1/ Flat (2) 22 1-002 NUT, 3/-16 Hex Jam 23 - SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade 2-12 NUT, 3/8-16 Hex Nyloc 2-003 PIN, 3/32 x 3/" Cotter (3) 26-02 SCREW, #10-32 x 1" Hex Washer Self-Tap 2 3-202 WASHER, /6 x 1-1/2" Flat (2) 28-1 WASHER, 3/8 Flat 2 1-6 STUD (3/8-2 Thread) 30 3-600 BRACKET, Brake Anchor 31-10 HAIRPIN, /16 x 1-3/16 32 1-03 WASHER, 3/ Flat (3) R. E. RIDER SERIES 16 & 18 2 MANUAL No. 0608
BELTS, BRAKES, INTERLOCK (28, 30", & 33 MODELS) (Series 16) 2 1 3 18 28 20 2 6 1 10 30 23 2 22 2 23 26 2 21 2 1 1 36 31 3 16 32 11 8 33 12 3 MANUAL No. 0608 30 R. E. RIDER SERIES 16 & 18
BELTS, BRAKES, INTERLOCK (28, 30", & 33 MODELS) (Series 16) 1-38 BELT, Drive (3. AA Section) 2 1-002 NUT, 3/-16 Hex Jam 3 3-202 WASHER, /6 I.D. x 1-1/2 O.D. Flat (2) 1-881 PULLEY, Spindle 1-20 HUB, Pulley 6-12 NUT, 3/8-16 Nyloc (2) 2-62 PULLEY, Idler (2) 8 - SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade (2) 3-28 BRACKET, Fixed Idler 10 3-626 BRACE 11-088 SCREW, /16-18 x 1/2 Hex Washer Self-Tap () 12 1-0 WASHER, Spindle 1-00 RING, 2 External Retaining (2) -003 PIN, 3/32 x 3/ Cotter () 1 2-3666 SPRING 16-8 ARM, Idler 1 1-3 SPACER 18 2-36 GRIP, Handle 1-1 WASHER, 3/8 Flat (2) 20 3-38 DRUM, Brake 21 1-30 PIN, 1/ x 1-/8 Clevis 22 3-82 BAND, Brake 23-0122 WASHER, 3/8 Flat (2) 2-00 WASHER, 1/ Flat (2) 2-0118 WASHER, 3/8 Split Lock 26 3-600 BRACKET, Brake Anchor 2 1-6 STUD (3/8-2 Thread) 28-2 HANDLE, Blade Lever (ON-OFF) 2 1-168 SPRING, Blade Handle 30 1-20 ROD, Idler 31-02 SCREW, #10-32 x 1 Hex Washer Self-Tap 32 1-82 SWITCH, Deck Interlock 33 3-8021 MOUNT, Handle 3-0362 SCREW, 1/-20 x /8 Hex Washer Self-Tap (2) 3 3-63 LINK, Chain 36-01 NUT, 3/8-2 Hex, Grade 2 R. E. RIDER SERIES 16 & 18 31 MANUAL No. 0608
BELTS, BRAKES, INTERLOCK (28, 30", & 33 MODELS) (Series 18) 1 2 3 18 3 20 12 6 1 10 36 2 38 3 2 26 2 22 23 2 2 21 30 8 1 1 32 31 2 28 11 16 33 SEE PAGE 22, ITEM 3 MANUAL No. 0608 32 R. E. RIDER SERIES 16 & 18
BELTS, BRAKES, INTERLOCK (28, 30", & 33 MODELS) (Series 18) 1-38 BELT, Drive (3. AA Section) 2 1-002 NUT, 3/-16 Hex Jam 3 3-202 WASHER, /6 I.D. x 1-1/2 O.D. Flat (2) 1-881 PULLEY, Spindle 1-20 HUB, Pulley 6-12 NUT, 3/8-16 Nyloc (2) 2-62 PULLEY, Idler (2) 8 - SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade (2) 3-28 BRACKET, Fixed Idler 10 3-626 BRACE 11-088 SCREW, /16-18 x 1/2 Hex Washer Self-Tap () 12-66 HANDLE, Blade Engage (Flip) 1-00 RING, 2 External Retaining (2) -003 PIN, 3/32 x 3/ Cotter (3) 1 3-621 SPRING, Extension, x 1/2 Diameter 16-8 ARM, Idler 1 1-3 SPACER 18-68 GRIP, Handle 1-1 WASHER, 3/8 Flat (2) 20 3-38 DRUM, Brake 21 1-30 PIN, 1/ x 1-/8 Clevis 22 3-82 BAND, Brake 23-0122 WASHER, 3/8 Flat (2) 2-00 WASHER, 1/ Flat () 2-66 EYE-BOLT, 1/-20 x 26-668 SPRING, Flip Handle 2-1 PIN, 3/16 x 1 Clevis 28-688 HANDLE, Blade Lever (ON-OFF) 2 1-168 SPRING, Blade Handle 30 1-20 ROD, Idler 31-02 SCREW, #10-32 x 1 Hex Washer Self-Tap 32 1-82 SWITCH, Deck Interlock 33 3-8021 MOUNT, Handle 3-0362 SCREW, 1/-20 x /8 Hex Washer Self-Tap (2) 3-0 PIN, 3/32 x 1/2 Cotter 36-061 NUT, 1/-20 Hex Top Lock 3 1-33 BUSHING 38-682 SPRING R. E. RIDER SERIES 16 & 18 33 MANUAL No. 0608
DRIVE DISC ASSEMBLY 2 1 3 1-308 ASSEMBLY,.18 O.D. Drive Disc (30" & 33" Models) (Includes Items 2 Thru ) - -30 ASSEMBLY, 6 O.D. Drive Disc (2" & 28 Models) (Includes Items 2 Thru ) 2 2-112 HUB 3 2-8 PULLEY, Drive (. O.D.) (2 & 28 Models) - 2-86 PULLEY, Drive (.18 O.D.) (30 & 33 Models) -02 SCREW, 3/8-16 x 3/8 Set (2) 1-0210 KEY, 1/ Square x 2 MANUAL No. 0608 3 R. E. RIDER SERIES 16 & 18
1 2 FUEL TANK & OPERATORS SEAT 3 3A 8 1 6 A 6 12 10 10 11 A 12 SOLID SEAT MOUNT HINGED SEAT MOUNT 1 2-2 SEAT, Operator (DeLuxe Back) -- 2-860 SEAT, Operator (28, 30, 33 - Series 18) -- 2-8 SEAT, Operator (33 Kohler- Series 18) 2-10 ASSEMBLY, Fuel Tank (Includes Item 3) -- -23 ASSEMBLY, Fuel Tank With Gauge (Includes Item 3A) 3 1-21 CAP, Fuel Tank 3A 1-3 CAP, Fuel Tank (With Gauge) -622 HOSE, Fuel (8-1/2" Long) (Briggs & Stratton: 8HP thru HP) -- 1-212 HOSE, Fuel (12-1/2 Long) (Kohler Only!) 1-3 FILTER, Fuel (In-Line) 6 1-2222 CLAMP, Fuel Line () 3-33 BRACKET, Fuel Tank (Rear) 8-12 SCREW, /16-18 x /8" Pan Head Self-Tap (Torx #T-0) (2) 2-311 KNOB, Seat Adjusting (2) A 2-86 KNOB, Hinged Seat (2) 10 1-38 SPACER, /16 (2) 11 2-0 VALVE, Fuel Shut-Off (Accessory) 12-1038 BOLT, /16-18 x 1/2" Hex Flange Lock w/nylon Patch (2) 2-33 SWITCH, Seat A 2-211 SWITCH, Seat R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608
ENGINES & EXHAUST MUFFLER ENGINE H.P. START TYPE ENGINE MFGR. MFGR. MODEL MFGR. TYPE 8.0 ROPE BRIGGS & STRATTON 102 02-01 8.0 ELECTRIC BRIGGS & STRATTON 10 0161-01 8.0 ELECTRIC BRIGGS & STRATTON C.A.R.B. 10 03-01 10.0 ELECTRIC BRIGGS & STRATTON C.A.R.B. 28A0 062-A1 10.0 ELECTRIC BRIGGS & STRATTON 28A0 0122-02 12.0 ELECTRIC BRIGGS & STRATTON 2830 06-01.0 ELECTRIC BRIGGS & STRATTON C.A.R.B. 28M0 1166-E1.0 ELECTRIC BRIGGS & STRATTON 280 023-01.0 ELECTRIC KOHLER CVST PS-0. ELECTRIC BRIGGS & STRATTON C.A.R.B. 280 123-E1 1.0 ELECTRIC KOHLER CV1ST PS-180 2 8 10 1 16 18 1 6 1 18 16 1 2-838 MUFFLER, 8HP Briggs 2-8 BRACKET, Heat Shield 3-16 MUFFLER (B&S - HP) (Includes items 11 & 12) -0206 SCREW, /16-18 x 3/ Hex Head Cap, Grade 2 (2) -18 SCREW, 1/-20x1-1/ Hex Head Cap 6 1-38 MUFFLER (Kohler /1 HP) 2-86 MUFFLER (B&S & -1/2 HP) 8 123 SCREW, 1/-20 x 3/8 Hex Washer Self-Tap (3) 1-38 SPACER (2) 1 12 11 3 10-106 NUT, 1/-20 Hex Flange Lock 11 1-2 DEFLECTOR, Heat 12 2-3023 SCREW #8-18 x 3/8 Type AB Modified -0362 SCREW, 1/-20 x /8 Hex Washer Self-Tap - SCREW, 1/-20 x 3/ Hex Head Cap, Grade 1 1-32 GASKET, Muffler 16-10 SCREW, 1/-20 x 1 Hex Head Cap, Grade 1-12 WASHER, 1/ Flat 18-002 WASHER, 1/ Split Lock MANUAL No. 0608 36 R. E. RIDER SERIES 16 & 18
THROTTLE CONTROL 3 2 2 1 1 2-1 CONTROL, Throttle (Briggs Engines) -- 2-283 CONTROL, Throttle (Kohler Engine) 2-0 SCREW, #10-2 x 1/2 Hex Washer Self-Tap (Torx) () 3 2-366 COVER, Dash Panel (Electric Start) -- 2-3680 COVER, Dash Panel (Manual Start) (not shown) -121 RIVET, Plastic Snap 2-36 KNOB, Throttle Control R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608
DECALS (Series 16) 1 2 3 8 6 10 11 12 MANUAL No. 0608 38 R. E. RIDER SERIES 16 & 18
DECALS (Series 16) 18 1 1 16 1 1 2-32 DECAL, 2 Inch 2 2-36 DECAL, 28 Inch 3 2-3 DECAL, 30 Inch 2-21 DECAL, 33 Inch 1-238 DECAL, Battery 6 1-6 SNAPPER, (Molded Logo) 3- LOGO, Convertible (Silver) (2 & 30, 10 HP Models) -- 2-068 LOGO, Convertible (Teal) (30, 12 HP Models) -- 2-06 LOGO, Convertible (Blue) (33 Models) 8 2-380 DECAL, Back-Up Recoil (30 & 33 Kohler Models) 2-382 DECAL, OHV (30 & 33 Kohler Models) 10 2-3 MEDALLION, Sam 11 2-383 DECAL, HP (30 & 33 Kohler Models) 12 2-02 DECAL, Auto Blade Stop (Point of Purchase Decal) -60 DECAL, Safety Instruction Warning 1-62 DECAL, Caution Deflector 1 1-63 DECAL, Caution Rotating Blades 16 1-3010 DECAL, Danger 1 1-61 DECAL, Caution Battery 18 2- DECAL, Belt Adjustment (Used on 2 Models) * 2-80 DECAL, SR82 * 2- DECAL, SR1028 * 2- DECAL, SR1030 * 2-80 LOGO, SR1230 (Molded) * 2-88 LOGO, SR33 (Molded) * 2-82 LOGO, SR33 (Molded) * 2-02 DECAL, Banner Stripe (Silver) (2, 28, 30 Mod.) * 2-03 DECAL, Banner Stripe (Teal) (30 Models) * 2-0 DECAL, Banner Stripe (Blue) (33 Models) * 2-001 DECAL, Bumper Stripe (Silver) (2", & 28 Models) * 2-002 DECAL, Bumper Stripe (Teal) (30" Models) * 2-00 DECAL, Bumper Stripe (Blue) (33" Models) * 2-8100 DECAL, Bumper Stripe (Silver) (30 Models) 1 2-1 DECAL, Caution Fuel *NOTE: These items NOT SHOWN. The description is the visual identification. R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608
DECALS (Series 18) 1 2 3 6 8 MANUAL No. 0608 0 R. E. RIDER SERIES 16 & 18 10
DECALS (Series 18) 12 11 1 1 2-36 DECAL, 28 Inch 2 2-3 DECAL, 30 Inch 3 2-21 DECAL, 33 Inch 2-02 DECAL, Auto Blade Stop -620 DECAL, Chute/Deflector Warning 6-60 DECAL, Safety Instructions -126 LOGO, Convertible Mower (Blue) 8 2-0 DECAL, Patent Numbers -220 DECAL, Certification, B1.1-18 10 1-238 DECAL, Battery 11 1-61 DECAL, Battery Caution 12 2-380 DECAL, Back-Up Recoil 2-6831 DECAL, Danger (CPSC) 2-1 DECAL, Caution, Fuel (English) 1 2-382 DECAL, OHV 16* -60 LOGO, SR28 * -610 LOGO, SR30 * 2-82 LOGO, SR33 * -611 LOGO, SR133 * -603 DECAL, Banner (Blue) * -60 BUMPER STRIPE, (Narrow Blue) * 2-00 BUMPER STRIPE, (Wide Blue) *NOTE: These items NOT SHOWN. The description is the visual identification. R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608
ELECTRICAL SYSTEMS (For 8 HP Recoil Wiring Diagram) 8 2 6 TO ITEM TO ITEM 11 H 12 G TO ITEM 1 (D,E,F) TO ITEM 1 (A) 1 10 G TO ITEM 3 3 MAGNETO SHORTING BLOCK 11 G. MAGNETO SHORTING BLOCK (SEE INSET) H. ENGINE GROUND MANUAL No. 0608 2 R. E. RIDER SERIES 16 & 18
ELECTRICAL SYSTEMS (For 8 HP Recoil Wiring Diagram) 1 2-8606 INTERLOCK, Module (Briggs) 2 2-8386 HARNESS, Deck Interlock 3 1-82 SWITCH, Deck Interlock Wiring (NO) -0880 WASHER, /8 Internal Tooth Lock 1-38 NUT, /8-32 Hex 6 1-18 KEY, Switch (2) 1-2 WIRE, Ground (Recoil Start) 8 1-2080 TIE, " Long Cable (2) 1-1 TIE, 2" Long Cable 10 1-183 SWITCH, (Recoil Start) (NC in off position) 11 2-2886 SWITCH, Operator s Presence (OPC) Traction (NC/NO) 12 2-860 HARNESS, Operator s Presence Control (OPC) Wire 2-211 SWITCH, Seat (8 HP & 10 HP Engines) (NC) R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608
ELECTRICAL SYSTEMS (For 8, 10, 12 & HP Briggs) TO ITEM 8 8 2 28 2 23 J I TO ITEM 2 TO ITEM 2 1 28 10 H G TO ITEM 6 (D, E, F) TO ITEM 6 (A) 1 2 20 TO ITEM 11 H 2 2 TO ITEM L 3 K L G. MAGNETO SHORTING BLOCK (See Inset, Pg. ) 21 16 6 L 2 1 26 12 11 M L 18 H. ENGINE GROUND I. ALTERNATOR CHARGING WIRE 22 J. STARTER TERMINAL M G TO ITEM K 1 MANUAL No. 0608 R. E. RIDER SERIES 16 & 18
ELECTRICAL SYSTEMS (For 8, 10, 12 & HP Briggs) 1 6-03 KIT, 12V Dry Charge Battery 2 1-881 SOLENOID 3 2-288 HARNESS, Starter Wiring (Briggs) 1-2 HARNESS, Ignition Wiring (Briggs) 1-6168 HOLDER, Fuse (Includes Fuse) -- 1-616 FUSE (10 AMP) 6 2-8606 INTERLOCK Module (Briggs) 2-8386 HARNESS, (Deck Interlock Wiring) 8 1-82 SWITCH, Deck Interlock (NO) 1-2 COVER, Battery Cable 10 1-326 CABLE, Positive (Red) 11 2-2880 SWITCH, Ignition (Used With Electric Start) 12-0880 WASHER, /8 Internal Tooth Lock 1-38 NUT, /8-32 Hex 1-18 KEY, Switch (2) 1-03 SCREW, 1/-20 x 1/2" Hex Washer Self-Tap (3) 16 2-288 PROTECTOR, Solonoid (2 Models Only!) 1-16 NUT, 1/-20 Hex, Grade or B () 18-003 WASHER, 1/ Internal Tooth Lock (2) 1 2-12 SCREW, 1/-20 x /8" Hex Head Cap, Grade (2) 20 2-802 CABLE, Negative 21 2-860 HARNESS, Operator Presence Control Wire 22-16 NUT, 1/-20 Hex, Grade or B 23 1-2080 TIE, " Long Cable (2) 2-032 NUT, 1/-20 Hex Center Lock, Grade or B (2) 2 1-1 TIE, 2" Long Cable 26 2-211 SWITCH, Seat (8 HP and 10 HP Engines Only!) (NC) 2 2-2886 SWITCH, Operator Presence Control (OPC) Traction (NC/NO) 28 1-28 RETAINER, 1/ Bolt (2 Models Only!) (2) 2 2-33 SWITCH, Seat (12 HP Briggs) (NC) MAGNETO SHORTING BLOCK R. E. RIDER SERIES 16 & 18 MANUAL No. 0608
ELECTRICAL SYSTEMS (For HP BRIGGS) 8 TO ITEM 8 TO ITEM 2 J I TO ITEM 16 2 26 1 26 2 23 10 H G TO ITEM 6 TO ITEM 6 (A) 1 2 20 H 2 TO ITEM 11 TO ITEM 6 L 16 K L G. MAGNETO SHORTING BLOCK (See Inset, Page ) 21 L 1 12 11 2 M L 18 H. ENGINE GROUND I. ALTERNATOR CHARGING WIRE 22 M J. STARTER TERM INAL TO ITEM N K TO CARBURETOR SOLENOID 1 MANUAL No. 0608 6 R. E. RIDER SERIES 16 & 18
ELECTRICAL SYSTEMS (For HP BRIGGS) 1 6-03 KIT, 12V Dry Charge Battery 2 1-881 SOLENOID 3 2-288 HARNESS, Starter Wiring (Briggs) 2-1 HARNESS, Ignition Wiring (Briggs) 1-6168 HOLDER, Fuse (Includes Fuse) -- 1-616 FUSE (10 AMP) 6 2-8606 INTERLOCK Module (Briggs) 2-8386 HARNESS, (Deck Interlock Wiring) 8 1-82 SWITCH, Deck Interlock (NO) 1-2 COVER, Battery Cable 10 1-326 CABLE, Positive (Red) 11 2-633 SWITCH, Ignition-Afterfire Solenoid 12-0880 WASHER, /8 Internal Tooth Lock 1-38 NUT, /8-32 Hex 1-18 KEY, Switch (2) 1-03 SCREW, 1/-20 x 1/2" Hex Washer Self-Tap (3) 16 2-2886 SWITCH, Operator Presence Control (OPC) Traction (NC/NO) 1-16 NUT, 1/-20 Hex, Grade or B () 18-003 WASHER, 1/ Internal Tooth Lock (2) 1 2-12 SCREW, 1/-20 x /8" Hex Head Cap, Grade (2) 20 2-802 CABLE, Negative (1 ) 21 2-86 HARNESS, Operator Presence Control Wire 22-16 NUT, 1/-20 Hex, Grade or B 23 1-2080 TIE, " Long Cable (2) 2-032 NUT, 1/-20 Hex Cent er Lock, Grade or B (2) 2 1-1 TIE, 2 Long Cable 26 1-28 RETAINER, 1/ Bolt (2) 2 2-33 SWITCH, Seat ( HP Briggs) (NC) MAGNETO SHORTING BLOCK R. E. RIDER SERIES 16 & 18 MANUAL No. 0608
ELECTRICAL SYSTEMS (For & 1 HP KOHLER) 8 TO ITEM 8 23 TO ITEM 2 2 26 TO ITEM 16 1 26 2 2 10 TO ITEM H TO ITEM 6 (D, E, F) TO ITEM 6 (A) 1 G TO ITEM 11 2 20 L I 16 J 3 6 L 12 H. ENGINE GROUND 21 11 I. BATTERY GROUND (See Inset, Page ) L 1 2 M L 18 G. ELECTRONIC CONTROL UNIT 22 J. STARTER TERMINAL K ENGINE MOUNTING PLATE MANUAL No. 0608 8 R. E. RIDER SERIES 16 & 18 M TO ITEM K 1
ELECTRICAL SYSTEMS (For & 1 HP KOHLER) 1 6-03 KIT, 12V Dry Charge Battery 2 1-881 SOLENOID 3 1-321 HARNESS, Starter Wiring (Kohler) 1-322 HARNESS, Ignition Wiring (Kohler) 1-6168 HOLDER, Fuse (Includes Fuse) -- 1-616 FUSE (10 AMP) 6 2-8606 INTERLOCK Module 2-8386 HARNESS, (Deck Interlock Wiring) 8 1-82 SWITCH, Deck Interlock (NO) 1-2 COVER, Battery Cable 10 1-326 CABLE, Positive (Red) (1 Long) 11 2-2880 SWITCH, Ignition (Used With Electric Start) 12-0880 WASHER, /8 Internal Tooth Lock 1-38 NUT, /8-32 Hex 1-18 KEY, Switch (2) 1-03 SCREW, 1/-20 x 1/2" Hex Washer Self-Tap (3) 16 2-2886 SWITCH, Operator Presence Control (OPC)Traction (NC/NO) 1-16 NUT, 1/-20 Hex, Grade or B () 18-003 WASHER, 1/ Internal Tooth Lock (2) 1 2-12 SCREW, 1/-20 x /8" Hex Head Cap, Grade (2) 20 2-802 CABLE, Negative (1 ) 21 2-868 HARNESS, Operator Presence Control Wire 22-16 NUT, 1/-20 Hex, Grade or B 23 1-2080 TIE, " Long Cable (2) 2-032 NUT, 1/-20 Hex Center Lock, Grade or B (2) 2 1-1 TIE, 2 Long Cable 26 1-28 RETAINER, 1/ Bolt (2) 2 2-33 SWITCH, Seat (NC) BATTERY GROUND SCREW FRONT VIEW OF ENGINE R. E. RIDER SERIES 16 & 18 MANUAL No. 0608
WIRING SCHEMATICS WIRING SCHEMATIC FOR 8 HP RECOIL START (Briggs Engine) MANUAL No. 0608 0 R. E. RIDER SERIES 16 & 18
WIRING SCHEMATICS WIRING SCHEMATIC FOR 8, 10, 12 & HP (Briggs Engines) R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608
WIRING SCHEMATICS WIRING SCHEMATIC FOR HP (Briggs Engine) MANUAL No. 0608 2 R. E. RIDER SERIES 16 & 18
WIRING SCHEMATICS WIRING SCHEMATIC FOR & 1 HP (Kohler Engines) R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608
HARDWARE BAGS LOCATION -- 6-12 HARDWARE BAG (includes items listed below) 1 1-102 PLUG, Oil Fill & Check (2)... page, item 18 & page 1, item 2 1-38 SPACER, 21/6 (2)... page 3, item 10 3 1-3862 PIN, 1/ x 1-1/2 Roll... page, item 3 2-86 KNOB, Hinged Seat (2)... page 3, item A 2-366 FOAM COVER, Steering Shaft... page, item 12 6 2-361 COVER, Steering Shaft... page, item -032 NUT, 1/-20 Hex Center Lock (2)... pg.,,, item 2 8-12 NUT, /16-2 Hex, Grade (2)... page, item 22-1038 BOLT, /16-18 x 1/2 Hex Flange Lock (2)... page 3, item 12 10-1 WASHER, /16 Split Lock (2)... page, item 23 11-11 PIN, 3/16 x 1-1/2 Cotter... page, item 16 LOCATION -- 6-3103 HARDWARE BAG (includes items listed below) 1 1-102 PLUG, Oil Fill & Check (2)... page, item 18 & page 1, item 2 1-38 SPACER, 21/6 (2)... page 3, item 10 3 1-3862 PIN, 1/ x 1-1/2 Roll... page, item 3 2-86 KNOB, Hinged Seat (2)... page 3, item A 2-366 FOAM COVER, Steering Shaft... page, item 12 6 2-361 COVER, Steering Shaft... page, item -032 NUT, 1/-20 Hex Center Lock (2)... pg.,, item 2 8 1-3321 BUSHING, Tie Rod (2)... page, item 2-1038 BOLT, /16-18 x 1/2 Hex Flange Lock (2)... page 3, item 12 10 2-12 SCREW, 1/-20 x /8 Hex Head Cap, Grade (2)... pg.,, item 1 11-11 PIN, 3/16 x 1-1/2 Cotter... page, item 16 12-116 PIN, /32 x 1 Cotter (2)... page 3, item 11 & page, item 28-1 WASHER, 3/8 Flat (2)... page, item 8 MANUAL No. 0608 R. E. RIDER SERIES 16 & 18
ACCESSORIES & ATTACHMENTS SNAPPER REAR ENGINE RIDER ACCESSORIES* PART NO. DESCRIPTION OF KIT MODELS USED ON 6-01... Wheel Weight (8 Wheels)... All Rear Engine Riders 6-0601... Smooth Start Clutch... All Rear Engine Riders 6-032... Drive Disc Puller... All RER Aluminum Drive Discs 6-06... Dump Cart... All Rear Engine Riders 6-00... Gauge Wheel... All 33 Deck Rear Engine Riders 6-0... Gauge Wheel... All 1 & 2 Deck Rear Engine Riders 6-01... Single Bag Catcher... All 2 Deck Rear Engine Riders 6-02... Single Bag Catcher... All 26 & 30 Deck Rear Engine Riders 6-03... Single Bag Catcher... All 28 & 33 Deck Rear Engine Riders 6-1886... Single Bag Catcher... All 38 Deck Rear Engine Riders 6-0... Single Bag Catcher... All 1 & 2 Deck Rear Engine Riders 6-06... Twin Bag Catcher... All 28 & 33 Deck Rear Engine Riders 6-1888... Twin Bag Catcher... All 38 Deck Rear Engine Riders 6-0... Twin Bag Catcher... All 1 & 2 Deck Rear Engine Riders 6-0... Bag-N-Wagon... All 28 & 33 Deck Rear Engine Riders 6-08... Thatcherizer... All Series & Newer Riders 6-06... Wagon Cover... All 28 & 33 Deck Rear Engine Riders 6-110... Weight (Front)... All Series & Newer Riders 6-0... Dozer Blade (36 Blade)... All Rear Engine Riders 6-03... Tire Chains (Tires-16 x 6.0-8)... All Rear Engine Riders 6-038... Tire Chains (Tires-16 x.80-8)... All Rear Engine Riders 6-1823... Ninja Recycling (Cover)... All 2 Deck Rear Engine Riders 6-10... Recycling (Cover)... All 2 Deck Rear Engine Riders 6-123... Ninja Recycling (Cover)... All 28 Deck Rear Engine Riders 6-12... Ninja Recycling (Cover)... All 30 Deck Rear Engine Riders 6-12... Ninja Recycling (Cover)... All 33 Deck Rear Engine Riders 6-1220... Ninja Recycling (Cover)... All 1 & 2 Deck Rear Engine Riders 6-110... Utility Trailer (10 Cubic Feet) 6-111... Aerator (36 ) 6-112... Dethatcher (0 ) 6-1... Lawn Sweeper (36 ) 6-1... Dethatcher Kit (For 36 Sweeper) 6-11... Lawn Roller (2 & 36 ) 6-116... Broadcast Spreader (3. Feet) *For illustrated parts lists see manual #0-608. R. E. RIDER SERIES 16 & 18 MANUAL No. 0608
Parts Manual for REAR ENGINE RIDER SERIES 16 & 18 COPYRIGHT 1 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No. 0608 (Rev., 08/21/02) Printed in U.S.A.