SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31, 2018 Certificate Number: 1051.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on automotive textiles: Test Abrasion: Martindale DIN EN ISO 12-947-1-2-4; GMW 14231, Section 3.3.11.2; FLTM BN158-01 Schopper GMW 3283 Stoll FLTM BN108-01 Taber ASTM D3884; GMW 3208; SAE J948; Toyota TSL2100G, Section 4.18; Honda HESD 6506, Section 5.10; Nissan M0154, Section 18 Bond Strength ASTM D413; ASTM D751; Chrysler 463LB-10-01; DIN 53 357; DIN 54 310; FLTM BN151-05; GMW 3220; Hyundai MS 320-11, Section 3.13; Volvo STD 10242851, Section 4.8; Toyota TSL2100G, Section 4.39; Honda 8320Z-SW5-9000, Section 5.16; Honda HESD 6506, Section 5.24; Subaru TS345-3-20, Section 6; Toyota TSL3610G, Section 7.5; Nissan 87000 ND S00 (12), Section 12-1-1-[2] (A2LA Cert. No. 1051.01) Revised 04/25/2018 Page 1 of 4
Resistance to Pilling (Velcro) VDA 230-210 Circular Modulus Toyota TSL3610G, Section 7.17 Cleanability Chrysler 463KC-4-01; FLTM BN112-08; GMW 3402; Nissan M0154, Section 35 Colorfastness: Crocking (Dry/Wet) AATCC 8; DIN EN ISO 105-X12; FLTM BN107-01; ISO 105-X12; SAE J861; Toyota TSL2100G, Section 4.22; Honda HESD 6506, Section 5.11; Nissan M0154, Section 29 Dye Stability AATCC 107; FLTM AN101-01; GMW 14141; LP-463KC-01-01 Lightfastness (Xenon) DIN 75 202-02; GMW 3414; SAE J2412; FLTM BO116-01 (3.8.1); Toyota TSL2100G; Honda HESD 6506, Section 5.14; HES 6601; Nissan M0154, Section 31 Method II-2; Volkswagen TL522 54 PV 1303 Perspiration FLTM AN101-01 Thermal Migration Ford WSS-M8P18-131-B4, Section 3.8.5 Conditioning ASTM D1776; GMW 3221-A Crease Flex Toyota TSL2100G, Section 4.21; Honda HESD 6506, Section 5.9 Elongation ASTM D5034; GMW 3010; ISO 13934-1; Isuzu ISC-C93-001, Section 3; Toyota TSL2100G, Section 4.7; Volkswagen TL52254, Section 4.20; Honda HESD 6506, Section 5.4 Fabric Weight FLTM BN106-01; Toyota TSL2100G, Section 4.1; (A2LA Cert. No. 1051.01) Revised 04/25/2018 Page 2 of 4
Fabric Weight (cont.) Honda HESD 6506, Section 5.3; Nissan M0154, Section 8; DIN EN 29073-1 Fiber Deterioration FLTM BN117-03, Section 3.7.2.2, Method B; GMW 3387 Fogging Flammability Heat Aging Chrysler 463DB-12-01; DIN 75 201-A; GMW 3235-A; SAE J1756; Honda HESD 6506, Section 5.32; TSM 503G FMVSS-302; GMW 3232; MS-JP 9-4; SAE J369; Honda HESD 6506, Section 5.18; Nissan M0154, Section 25; TSM 500G Chrysler 463LB-13-01; Ford WSS-M8P18, Section 3.8.2; Honda HESD 6506, Section 5.27 Hydrolysis GMW 14124 Lint Retention GMW 3347 Pliability/Flexibility GMW 3390; Honda HESD 6506, Section 5.8 Raveling GMW 3217 Seam Fatigue FLTM BN106-02; GMW 3405; Toyota TSL2100G, Section 4.17; Honda HESD 6506, Section 5.16; Nissan M0154, Section 17 Seam Strength FLTM BN119-01; LP-463KB-13-01; Honda HESD 6506, Section 5.15; Nissan M0154, Section 15 Shrinkage/ FLTM BN105-01; Dimensional Change SAE J883; Honda HESD 6506, Sections 5.25 and 5.26; Nissan M0154, Section 43 (A2LA Cert. No. 1051.01) Revised 04/25/2018 Page 3 of 4
Snagging FLTM BN108-07 Stretch/Set (Static) DIN 53 360; SAE J855; Toyota TSL2100G, Section 4.9; Honda HESD 6506, Section 5.5; Nissan M0154, Section 20; Volkswagen TL 522 54 PV 3909 Surface Abrasion Toyota TSL2100G, Section 4.19 Surface Seam Abrasion Toyota TSL2100G, Section 4.42 Tear Strength: Trapezoidal ASTM D1117; ASTM D5587; GMW 3326; Toyota TSL2100G, Section 4.12; Honda HESD 6506, Section 5.6; Nissan M0154, Section 14 Tongue ASTM D2261; ASTM D5735; ISO 13937-2; Honda 8320Z-SW5, Section 5.6/JIS K 7128; Toyota TSL3610G, Section 7.4 Tensile Strength ASTM D5034; DIN 13934-1; GMW 3010; Toyota TSL2100G, Section 4.7; Honda HESD 6506, Section 5.4; Nissan M0154, Section 13 UV Retained Tensile FLTM BN117-03, Section 3.7.2.1 Wales/Courses ASTM D3775, D3887; Honda HESD 6506, Section 5.1 * The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with any material specifications listed below. The inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications nor does it confer accreditation for every method embedded within the specification. Only the methods listed above on this Scope are accredited. Material Specifications: BMW, Ford, GM 2751M, GMW 14231, WSS-M8P18 A1/A4, ESB-M5H9-F/G, MS-JF-1000, MS-JE-5000, Toyota TSL2100G, Volkswagen 501.05 (A2LA Cert. No. 1051.01) Revised 04/25/2018 Page 4 of 4
Accredited Laboratory A2LA has accredited GUILFORD PERFORMANCE TEXTILES - KENANSVILLE Kenansville, NC for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 11 th day of July 2016. President and CEO For the Accreditation Council Certificate Number 1051.01 Valid to May 31, 2018 Revised: April 25, 2018 For the tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.