ACO Building Drainage Products

ACO Building ringe Products Pipe ringe ACO STAINLESS Technicl Hndook nd Product Ctlogue ACO Pipe Stinless Steel Socketed Pipe Systems

ACO World Leders in rin Technology Qulity Introduction 2 ACO Austrli's Hed Office Emu Plins, New South Wles ACO is the world leder in the design nd mnufcture of corrosion resistnt uilding dringe systems. Estlished in 1946, the ACO group hs mnufctured products for over 50 yers for the construction nd uilding industries. The group opertes on glol sis through its susidiries nd mnufcturing fcilities in over 40 countries. ACO employs more thn 3,800 people nd hs sles in excess of $A1 illion. Contents Key Benefits 3 Fetures 4 Project Plnning 6 Product Rnge Pipe 10 Product Rnge Fittings 13 Instlltion 22 Sel Mteril t 26 Cre nd Mintennce 27 The ACO group is dedicted to chieving the highest possile stndrds of qulity throughout the orgnistion. ACO Polycrete Pty Ltd is n ASI registered compny hving een ssessed to ISO 9001, the interntionlly recognised stndrd for qulity. WterMrk Licence Level 1 WterMrk is grnted to ACO s products re mnufctured under qulity ssurnce progrm endorsed y Stndrds Austrli. ACO Pipe hs een ssessed nd ISO 9001 QEC 1883 SAI Glol Assurnce Services AS3495 WMK A00687 complies to AS3495 Authoristion requirements for pluming products stinless steel non pressure pipes nd fittings. ACO hs developed rnge of stinless steel pipe systems for multi-dringe pplictions. ACO Pipe stinless steel socketed pipe systems provide the modern metl lterntive to PVC nd HPE soil nd wste pipework. The rnge is completely comptile with ACO floor drins, chnnel systems nd stormwter dringe products, which mke up the complete portfolio for uilding dringe. ACO Pipe is mnufctured from ustenitic stinless steel, grde 316. All products re chemiclly pickled nd pssivted for optimum durility nd corrosion resistnce. ACO Pipe, pipes nd fittings re ville in 50mm, 75mm, 110mm, 125mm, 160mm nd 200mm (externl dimeters) with pipes supplied s stndrd from 0.15 metre up to 6 metre lengths for optimum prcticlity nd ese of ssemly. 250mm dimeter pipes re mde to order. Interntionl Accredittion Memer of ASSA

ACO STAINLESS Key Benefits 1. Comprehensive rnge pipe lengths up to 6 metres for dimeters up to 160mm. 2. Ese of instlltion components re lightweight nd push fit for quick ssemly. 3. Optimum joint integrity components hve low coefficient of therml expnsion compred with HPE (in prticulr) which tends to fil when operting tempertures vry etween 10 C nd 60 C. 4. Superior sel security components comprise unique doule lip seling system, idel for extrneous conditions (see imge elow). 5. Long service life components mnufctured from grde 316 stinless steel for high corrosion resistnce nd low on-going mintennce (see pge 4). 6. Qulity design & mnufcture components exhiit etter geometric concentricity, fitting design nd weld qulity thn ny other product in the industry. 7. Connection dptility components re suitle for either push-fit or weldup connection methods. 3 www.cous.com.u/stinless

Fetures Stinless Steel, Grde 316 Cost competitive lterntive to HPE, trditionl cst iron nd luminium lloy systems. Excellent corrosion resistnce ensures long design life. Non comustiility of stinless steel ids in the mngement of fire continment through wlls nd comprtments. Non-hzrdous mteril. Wether proof nd ville in n electropolished finish to specil order. Reference Stndrds ACO Pipe is designed, mnufctured, tested nd checked ccording to the stndrds EN 1124-1 nd EN 1124-2: Pipes nd fittings of longitudinlly welded stinless steel pipes with spigot nd socket for wste wter systems. Additionlly, ACO Pipe hs een ssessed nd complies to AS3495: Stinless steel non pressure pipes nd fittings. Operting Pressure ACO Pipe, pipes nd fittings re fitted with unique, doule sel. The doule sel rrngement provides dded security for long term reliility. ACO Pipe is tested nd pproved for operting pressures in ll grvity, syphonic nd vcuum systems nd is designed for mximum working pressure of 0.5r nd 0.9r (in clen vcuum pplictions). In the cse where higher pressure my pply, it will e necessry to instll the system with socket clmps. (See pges 20 nd 24.) Therml Movement 4 ACO Pipe stinless steel components hve low coefficient of therml expnsion. A comprison of pproximte therml movement etween different pipe mterils (in mm per m) with temperture chnge of 60 C is given elow. Mteril mm / m Aluminium Alloy 1.44 Copper 0.98 Grey Cst Iron 0.75 HPE 9.00 PVCu 3.00 Stinless Steel 0.99 Pipe dimeters of 50mm, 75mm, 110mm, 125mm, 160mm nd 200mm ville. Socketed end profiles provide modulr push-fit system, tht offers ll the time sving enefits of trditionl PVC pipe systems 1mm minimum wll thickness provides lightweight, esy to hndle system tht cn withstnd everydy wer nd ter. Stndrd sections ville in 150mm, 250mm, 500mm, 750mm, 1000mm, 1500mm, 2000mm, 2500mm, 3000mm, 4000mm, 5000mm nd 6000mm lengths for optimum prcticlity of hndling nd freight.

ACO STAINLESS All components re mnufctured using dvnced cold forming techniques which minimise the mount of welding required. A full rnge of ngles, rnches, ccessories nd instlltion devices reduce the mount of on-site cutting nd instlltion time. A 10 evel fcilittes esy push fit connection of sections. Where required, ll joints cn e fully circumferentilly welded for extr security. A unique doule lip sel on ll joints ensures troule-free, relile system. L 5 3 1 2 T imensions of Socket nd Spigot 1 2 3 Socket Length L Wll Thickness [mm] [mm] [mm] [mm] [mm] [mm] 50.0 51.0 62.0 47.0 42.0 1.0 75.0 76.0 87.5 72.0 50.0 1.0 110.0 111.0 125.5 107.0 57.0 1.0 125.0 126.0 141.0 122.0 63.0 1.0 160.0 161.0 178.0 156.0 70.0 1.25 200.0 201.0 219.0 195.0 80.0 1.5 www.cous.com.u/stinless

Project Plnning esign & Mintennce Tips 6 Perform risk ssessment of the instlltion to ssess the consequences of flooding due to lockges of silt nd scle uild up within the pipe system. Repet this ssessment for unexpected hydrulic demnds due to ccidentl spillge, thunderstorms nd extrneous events. Perform the necessry risk ssessment if the system is likely to e sujected to therml shock. Within design limits, ACO Pipe is prticulrly tolernt of sudden temperture chnges without risk of dmge. Avoid selecting pipe sizes tht re t, or close to, their hydrulic cpcities, s the long-term effects of silt nd scle cn reduce system's hydrulic cpcity over time. For stormwter pplictions, check the geogrphicl loction to confirm the design rinfll intensity. Confirm the ctul grdient of the instlled pipe system. A level (or nerly level) grdient will hve reduced hydrulic performnce compred to instlltions with defined grdients. Assess the fluids to e drined in the system to void corrosion of the pipe nd/or sels. Checklist s follows: Identify ech chemicl contined in the fluid. Estlish chemicl concentrtion(s). Confirm mximum temperture of the solution. Given the ove informtion, the correct sel (see pges 20 nd 26) cn e selected. esign the system with the minimum numer of joints nd limit the numer of ends. This will help to reduce oth costs nd hydrulic losses. Provide good ccess points for clening/rodding to mintin the hydrulic performnce of the system. Cre should e tken to void dmge, oth during nd fter instlltion, s dents nd kinks will ffect the hydrulic performnce. For ove ground pplictions, dmge will lso ffect the system's esthetics. The following stndrds will ssist designers select the correct size of pipe system for prticulr ppliction: EN 12056: Grvity ringe Systems Inside Buildings. EN 752: rin nd Sewer Systems Outside Buildings. Refer to pges 8 nd 9 for hydrulic dt for ACO Pipe. Pipework Support Instlltion should e in ccordnce with the mnufcturer s recommendtions, EN12056 2, EN12056 3 nd EN752. esigners must ensure tht ll pipework is supported with rckets ccording to the requirements of AS/NZ3500 (see pge 25). Pipe Weights Engineers should e wre of minimum nd mximum weights when designing verticl stck nd horizontl pipe run systems (see pge 25).

ACO STAINLESS esigning Mintennce Progrmme With cre tken during friction nd instlltion, clening efore hnding over to the client should present no specil chllenges, lthough more ttention thn norml my e required if the instlltion period hs een prolonged. Where surfce contmintion is suspected, immedite ttention to clening fter instlltion will ensure troule free hndover. uring service, food nd everge hndling, phrmceuticl nd chemicl industry pplictions require extremely high levels of clenliness pplicle to ech ppliction. Advice is often sought regrding the frequency of clening stinless steel. Generlly, it is usully cceptle to only clen the metl when it is dirty to restore its originl ppernce. This my vry from one to four times yer for externl pplictions or it cn e dily in hygienic or ggressive environments. Stinless steel is esy to clen. Wshing with sop or mild detergent nd wrm wter, followed y cler wter rinse is usully quite dequte for mny industril pplictions. An enhnced esthetic ppernce will e chieved if the clened surfce is finlly wiped dry. If professionl mintennce is required (e.g. for uilding upgrdes), stinless steel cn e mechniclly clened or electropolished y specilists on site. See pge 27 for more informtion on cre nd mintennce. 7 www.cous.com.u/stinless

Project Plnning Hydrulic esign Compred to cst iron, cly nd vitreous pipe systems, stinless steel pipes hve considerly smoother ore (Mnning Coefficient: 0.011) nd in generl, re less susceptile to internl scling. In some instnces, low roughness coefficients (ks) re not generlly true reflection of the long-term hydrulic performnce of the instlled system. Roughness coefficients of 0.6mm should e used for rinwter/storm dringe nd 1.5mm for soil/foul dringe. Flow Tles Two sets of flow tles re presented within this design guide. Tle 1 is for pipes instlled with level (or nerly level) grdients where the stedy, uniform flow equtions re not pplicle. The dt therefore hs een generted from ACO's hydrulic design progrm 'Hydro' tht is sed on the equtions of sptilly-vried flow. Tle 2 is for pipes instlled with vrying grdients. The dt is sed on the Colerook-White eqution using n pproprite roughness coefficient for stinless steel. When drining storm or foul wter, it is inevitle tht sediment deposits will occur within the dringe system. Sediment nd scle deposits will reduce the flow rte through ny pipe system nd it is recommended tht n llownce is mde for this within the design nd plnning phse. 8 Tle 1. Full ore flow rte tles for level (or nerly level) grdients Flow rtes sed on sptilly-vried flow formul for stedy non-uniform flow. Mnning Coefficient 0.011 Grdient Pipe i (mm) Length (m) 0.0% 0.25% 0.5% 0.75% Q (l/s) Q (l/s) Q (l/s) Q (l/s) 50 5 0.40 0.57 0.75 0.92 50 10 0.30 0.54 0.75 0.92 50 15 0.26 0.53 0.75 0.92 50 20 0.23 0.53 0.75 0.92 75 5 1.45 1.75 2.40 2.90 75 10 1.10 1.72 2.35 2.90 75 15 0.95 1.70 2.35 2.90 75 20 0.85 1.70 2.35 2.90 110 5 4.50 5.55 6.75 8.15 110 10 3.60 5.05 6.60 8.15 110 15 3.20 4.90 6.50 8.15 110 20 2.80 4.80 6.50 8.15 125 5 6.45 7.90 9.60 11.45 125 10 5.20 7.25 9.50 11.45 125 15 4.55 7.00 9.50 11.45 125 20 4.10 6.85 9.50 11.45 160 5 13.00 15.40 18.60 21.20 160 10 10.90 14.30 18.50 21.20 160 15 9.50 13.80 18.40 21.20 160 20 8.50 13.50 18.30 21.20 200 5 24.80 29.00 34.20 38.70 200 10 20.80 26.70 33.80 38.40 200 15 18.60 25.70 33.70 38.40 200 20 17.00 25.00 33.60 38.40 Using sptilly vried flow equtions, the length to n outlet will determine the mximum flow rte through the pipe. The flow rtes shown ove ssume n unrestricted dischrge from the pipe. For instlltions without n unrestricted dischrge, the flow rte will e ffected y the downstrem throttle.

ACO STAINLESS Tle 2. Full ore flow rte tles velocities for vrying grdients Tle 2. For rinwter/storm dringe pplictions Flow rtes sed on Colerook-White formul. Roughness coefficient ks =0.6mm Grdient Pipe Ø50mm Pipe Ø75mm Pipe Ø110mm Pipe Ø125mm Pipe Ø160mm Pipe Ø200mm (%) Q (l/s) v (m/s) Q (l/s) v (m/s) Q (l/s) v (m/s) Q (l/s) v (m/s) Q (l/s) v (m/s) Q (l/s) v (m/s) 10.0 2.74 1.52 8.40 2.01 23.81 2.60 33.61 2.83 64.15 3.31 116.89 3.83 7.5 2.38 1.31 7.28 1.74 20.62 2.25 29.11 2.45 55.56 2.87 101.22 3.32 5.0 1.94 1.07 5.94 1.42 16.83 1.84 23.77 2.00 45.36 2.34 82.65 2.71 4.5 1.84 1.02 5.64 1.35 15.97 1.74 22.55 1.90 43.03 2.22 78.40 2.57 4.0 1.73 0.96 5.31 1.27 15.06 1.64 21.26 1.79 40.57 2.10 73.92 2.43 3.5 1.62 0.90 4.97 1.19 14.08 1.54 19.88 1.67 37.95 1.96 69.14 2.27 3.0 1.50 0.83 4.60 1.10 13.04 1.42 18.41 1.55 35.13 1.81 64.01 2.10 2.5 1.37 0.76 4.20 1.00 11.90 1.30 16.80 1.41 32.07 1.66 58.43 1.92 2.0 1.23 0.68 3.76 0.90 10.64 1.16 15.03 1.26 28.68 1.48 52.26 1.71 1.5 1.06 0.59 3.25 0.78 9.22 1.01 13.01 1.10 24.84 1.28 45.26 1.48 1.0 0.87 0.48 2.66 0.63 7.53 0.82 10.63 0.89 20.28 1.05 36.95 1.21 Tle 2. For soil/foul wter dringe pplictions Flow rtes sed on Colerook-White formul. Roughness coefficient ks =1.5mm Grdient Pipe Ø50 mm Pipe Ø75 mm Pipe Ø110 mm Pipe Ø125 mm Pipe Ø160 mm Pipe Ø200 mm (%) Q (l/s) v (m/s) Q (l/s) v (m/s) Q (l/s) v (m/s) Q (l/s) v (m/s) Q (l/s) v (m/s) Q (l/s) v (m/s) 10.0 2.30 1.27 7.14 1.71 20.45 2.23 28.97 2.44 55.61 2.87 101.81 3.34 7.5 1.99 1.10 6.19 1.48 17.71 1.93 25.09 2.11 48.16 2.49 88.17 2.89 5.0 1. 6 0.80 4.52 1.08 12.94 1.41 18.32 1.54 35.17 1.82 64.39 2.11 3.5 1.36 0.75 4.23 1.01 12.10 1.32 17.14 1.44 32.90 1.70 60.23 1.98 3.0 1.26 0.70 3.91 0.93 11.20 1.22 15.87 1.34 30.46 1.57 55.76 1.83 2.5 1.15 0.64 3.57 0.85 10.23 1.12 14.49 1.22 27.80 1.44 50.90 1.67 2.0 1.03 0.57 3.19 0.76 9.15 1.00 12.96 1.09 24.87 1.28 45.53 1.49 1.5 0.89 0.49 2.77 0.66 7.92 0.86 11.22 0.94 21.53 1.11 39.43 1.29 1.0 0.73 0.40 2.26 0.54 6.47 0.71 9.16 0.77 17.58 0.91 32.19 1.06 9 The flow rtes shown ove ssume n unrestricted dischrge from the pipe. For instlltions without n unrestricted dischrge, the flow rte will e ffected y the downstrem throttle. For shllow grdients, the Colerook-White formul underestimtes flow rtes (ecuse when grdient tends towrds zero%, velocity lso tends to zero). For level (or nerly level) instlltions (slope < 1%), sptilly vried flow tles should e used; refer to Tle 1. www.cous.com.u/stinless

Product Rnge Pipe AP Socketed Pipes 50 mm Active Length L Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 50 150 0.2 EPM 98550 50 250 0.4 EPM 98552 50 500 0.7 EPM 98554 50 750 1.0 EPM 98556 50 1000 1.3 EPM 98558 50 1500 1.9 EPM 98560 50 2000 2.6 EPM 98562 L 50 2500 3.2 EPM 419282 50 3000 3.8 EPM 98564 50 4000 5.0 EPM 419482 50 5000 6.3 EPM 419490 50 6000 7.5 EPM 419498 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Socketed Pipes 75 mm Active Length L Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 75 150 0.4 EPM 98556 75 250 0.6 EPM 98558 10 75 500 1.0 EPM 98570 75 750 1.5 EPM 98572 75 1000 2.0 EPM 98574 75 1500 2.9 EPM 98576 75 2000 3.6 EPM 98578 L 75 2500 4.8 EPM 419284 75 3000 5.7 EPM 98580 75 4000 7.6 EPM 419484 75 5000 9.4 EPM 419492 75 6000 11.3 EPM 419500 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO.

ACO STAINLESS AP Socketed Pipes 110 mm Active Length L Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 110 150 0.6 EPM 98582 110 250 0.9 EPM 98584 110 500 1.5 EPM 98586 110 750 2.2 EPM 98588 110 1000 2.9 EPM 98590 110 1500 4.3 EPM 98592 110 2000 5.7 EPM 98594 110 2500 7.1 EPM 419286 L 110 3000 8.4 EPM 98596 110 4000 11.1 EPM 419486 110 5000 13.9 EPM 419494 110 6000 16.7 EPM 419502 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Socketed Pipes 125 mm Active Length L Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 125 150 0.68 EPM 419712 125 250 1.02 EPM 419714 125 500 1.71 EPM 419716 125 750 2.50 EPM 419718 11 125 1000 3.30 EPM 419720 125 1500 4.90 EPM 419722 125 2000 6.49 EPM 419724 L 125 2500 8.09 EPM 419728 125 3000 9.57 EPM 419726 125 6000 19.03 EPM 419730 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. www.cous.com.u/stinless

AP Socketed Pipes 160 mm Active Length L Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 160 150 1.10 EPM 98598 160 250 1.60 EPM 98650 160 500 2.90 EPM 98652 160 750 4.10 EPM 98654 160 1000 5.40 EPM 98656 160 1500 7.90 EPM 98658 160 2000 10.4 EPM 98660 L 160 2500 12.9 EPM 419288 160 3000 15.4 EPM 98598 160 4000 20.4 EPM 419488 160 5000 25.4 EPM 419496 160 6000 30.4 EPM 419504 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Socketed Pipes 200 mm Active Length L Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 200 500 4.5 EPM 419384 200 1000 8.3 EPM 419388 200 2000 15.8 EPM 419392 L 12 200 3000 23.2 EPM 419396 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO.

ACO STAINLESS Product Rnge Fittings AP Bends 87.5 Weight Sel Order No [mm] [mm] [mm] [kg] Mteril * AISI 316 50 86 40 0.2 EPM 98750 87.5 Shpe vlid for N 50, 75, 110 nd 160. 75 107 53 0.4 EPM 98752 110 134 67 0.7 EPM 98754 87.5 125 161 93 0.8 EPM 419734 160 181 105 1.7 EPM 98756 200 215 129 3.9 EPM 419413 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. Shpe vlid for N 125 nd 200. AP Bends 45 Weight Sel Order No [mm] [mm] [mm] [kg] Mteril * AISI 316 50 62 24 0.20 EPM 98758 Shpe vlid for N 50, 75, 110 nd 160. 75 76 32 0.30 EPM 98760 110 93 42 0.50 EPM 98762 45 125 110 50 0.57 EPM 419738 160 131 55 1.30 EPM 98764 200 152 60 2.70 EPM 419409 Shpe vlid for N 125 nd 200. 45 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Bends 30 Weight Sel Order No [mm] [mm] [mm] [kg] Mteril * AISI 316 50 57 16 0.2 EPM 98766 75 71 21 0.3 EPM 98768 110 85 27 0.5 EPM 98770 13 125 98 28 0.57 EPM 419742 160 110 40 1.2 EPM 98772 30 200 137 45 2.3 EPM 419405 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Bends 15 Weight Sel Order No [mm] [mm] [mm] [kg] Mteril * AISI 316 50 54 12 0.1 EPM 98774 75 66 16 0.3 EPM 98776 110 78 15 0.4 EPM 98778 125 84 19 0.45 EPM 419746 160 99 29 1.0 EPM 98780 200 123 31 1.9 EPM 419401 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. 15 www.cous.com.u/stinless

AP Single Brnches 87.5 Weight Sel Order No [mm] [mm] [mm] [kg] Mteril * AISI 316 50 106 71 0.30 EPM 98782 75 139 90 0.50 EPM 98784 87.5 110 183 117 0.80 EPM 98786 125 220 135 0.91 EPM 419750 160 288 184 2.30 EPM 98788 200 333 206 4.50 EPM 419421 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Single Reduction Brnches 87.5 1 2 Weight Sel Order No [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 75 50 139 90 0.3 EPM 98930 110 50 183 117 0.5 EPM 98934 87.5 110 75 183 117 0.8 EPM 98938 125 75 187 110 0.9 EPM 419754 125 110 206 127 0.9 EPM 419758 2 160 110 288 184 2.3 EPM 400693 200 160 293 186 3.7 EPM 419417 1 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP oule Reduction Brnches 87.5 1 2 Weight Sel Order No [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 87.5 75 50 139 90 0.3 EPM 98942 14 110 50 183 117 0.6 EPM 98946 110 75 183 117 0.9 EPM 98902 160 110 288 184 2.7 EPM 400697 2 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. 1

ACO STAINLESS AP Single Brnches 45 c Weight Sel Order No [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 50 128 57 76 0.3 EPM 98798 45 75 179 74 110 0.5 EPM 98850 110 233 88 149 1.0 EPM 98852 125 273 103 170 1.14 EPM 419762 160 332 119 222 2.6 EPM 98854 200 415 151 274 5.7 EPM 419429 c * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Single Reduction Brnches 45 1 2 c Weight Sel Order No [mm] [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 75 50 144 56 94 0.3 EPM 400663 45 2 110 50 147 42 119 0.5 EPM 400667 110 75 182 60 135 1.0 EPM 400671 125 75 200 65 141 1.12 EPM 419766 125 110 250 90 160 1.13 EPM 419770 c 160 110 332 119 191 2.6 EPM 400701 200 160 359 123 250 4.7 EPM 419425 1 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP oule Brnches 45 c Weight Sel Order No [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 45 45 50 128 57 76 0.4 EPM 98856 75 179 74 110 0.7 EPM 98858 110 233 88 149 1.2 EPM 98860 160 332 184 222 3.5 EPM 98862 c 15 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP oule Reduction Brnches 45 1 2 c Weight Sel Order No [mm] [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 75 50 144 56 94 0.4 EPM 400675 45 45 2 110 50 147 42 119 0.7 EPM 400679 110 75 182 60 135 1.2 EPM 400683 160 110 332 119 190 3.5 EPM 400705 c * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. 1 www.cous.com.u/stinless

AP Swept Single Brnches 87.5 c Weight Sel Order No [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 50 128 57 117 0.3 EPM 98864 87.5 75 179 74 157 0.6 EPM 98866 110 233 88 209 1.1 EPM 98868 c 160 332 184 302 2.8 EPM 98870 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP 'P' Trps c Weight Sel Order No [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 50 68 187 149 0.5 EPM 98872 2.5 75 94 232 193 0.7 EPM 98874 110 132 300 254 1.3 EPM 98876 160 190 404 347 3.3 EPM 98878 c * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Stright Couplings Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 50 54 0.1 EPM 98970 75 75 0.2 EPM 98972 16 110 84 0.4 EPM 98974 125 140 0.4 EPM 419815 160 110 0.8 EPM 98976 200 136 1.8 EPM 419433 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Repir Couplings Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 50 44 0.1 EPM 98880 75 46 0.2 EPM 98882 110 52 0.3 EPM 98884 125 70 0.34 EPM 419774 160 76 0.7 EPM 98886 200 100 1.5 EPM 419437 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. Repir couplings re used to id convenient repir to dmged in-situ pipe. Unlike the stndrd stright coupling, there is no centrl registrtion to limit the insertion depth of the pipe. The repir coupling slides completely over pipe joint nd simply re-positioned to ridge the required pipe joint. Instlltion tip: mrk the finl position of the repir coupling on the instlled pipe system to ensure the coupling sels re positioned symmetriclly out the pipe joint.

ACO STAINLESS AP Expnsion Sockets Weight Sel Order No [mm] [mm] [mm] [kg] Mteril * AISI 316 50 159 102 0.2 EPM 98666 75 175 113 0.3 EPM 98670 110 200 121 0.5 EPM 98674 125 250 165 0.57 EPM 419778 160 292 170 1.4 EPM 98678 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Eccentric nd Concentric Increser Couplings 1 2 Weight Sel Order No [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 50 75 88 7 0.3 EPM 98892 1 50 110 103 25 0.4 EPM 98878 75 110 116 15 0.5 EPM 98894 110 125 107 0 0.57 EPM 419780 110 160 123 22 1.1 EPM 98896 125 160 150 0 1.2 EPM 419811 160 200 170 0 1.8 EPM 419441 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. These couplings re designed s concentric. 2 AP Connectors with Internl Screw Thred nd Spigot 1 2 Weight Order No [mm] [mm] [kg] AISI 316 50 Rp 1 1 / 4 " 72 0.20 98956 50 Rp 1 1 / 2 " 75 0.28 98957 50 Rp 2" 80 0.30 98958 2 1 17 AP Connectors with Externl Screw Thred nd Spigot 1 2 Weight Order No [mm] [mm] [kg] AISI 316 50 R 1 1 / 4 " 100 0.20 419330 50 R 1 1 / 2 " 100 0.28 419331 50 R 2" 100 0.30 419332 2 1 www.cous.com.u/stinless

AP Connectors with Socket nd Externl Screw Thred 1 2 Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 50 R 1 1 / 4 " 58 0.20 EPM 419250 1 50 R 1 1 / 2 " 58 0.28 EPM 419252 50 R 2" 58 0.30 EPM 419254 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. 2 AP Connectors with Socket nd Internl Screw Thred 1 2 Weight Sel Order No [mm] [mm] [kg] Mteril * AISI 316 50 Rp 1 1 / 4 " 58 0.20 EPM 419333 1 50 Rp 1 1 / 2 " 58 0.25 EPM 419335 50 Rp 2" 58 0.30 EPM 419337 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. 2 AP Connectors with Socket nd Flnge 1 2 3 4 n x S Weight Sel Order No [mm] [mm] [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 50 N40 110 150 4 x 18 100 2.3 EPM 419256 50 N50 125 165 4 x 18 100 2.7 EPM 419258 5 1 18 75 N65 145 185 4 x 18 100 3.4 EPM 419260 110 N100 180 220 8 x 18 100 4.9 EPM 419262 200 N200 295 340 12 x 22 102 12.0 EPM 419514 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. Note: Flnge PN 16 IN 2633, Flnge PN 6 nd PN 10 ville on request. 2 3 4 AP Connectors with Flnge nd Spigot 1 2 3 4 n x S Weight Sel Order No [mm] [mm] [mm] [mm] [mm] [mm] [kg] Mteril * AISI 316 50 N40 110 150 4 x 18 192 2.3 EPM 419264 4 3 2 50 N50 125 165 4 x 18 192 2.7 EPM 419265 75 N65 145 185 4 x 18 245 3.4 EPM 419266 110 N100 180 220 8 x 18 259 4.9 EPM 419267 160 N150 240 285 8 x 22 200 8.5 EPM 419540 5 200 N200 295 340 12 x 22 240 12.3 EPM 419541 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. Note: Flnge PN 16 IN 2633, Flnge PN 6 nd PN 10 ville on request. 1

ACO STAINLESS AP Access Units Weight Sel Order No [mm] [mm] [mm] [kg] Mteril * AISI 316 75 139 90 0.50 EPM 98963 110 183 117 0.80 EPM 98965 125 210 135 0.91 EPM 419785 160 288 184 2.30 EPM 98967 200 293 186 3.70 EPM 419678 * For more ggressive pplictions, FPM & NBR sels re ville. Contct ACO. AP Socket Plugs 1 2 Weight Order No [mm] [mm] [mm] [kg] AISI 316 50 45 58 0.10 98888 75 45 85 0.30 98889 2 110 45 120 0.50 98890 125 50 135 0.57 419782 160 50 170 0.50 98891 1 200 50 210 1.00 98994 AP Socket Plugs with Clmp 1 2 Weight Order No [mm] [mm] [mm] [mm] [kg] AISI 316 50 58 45 88 0.40 419138 75 85 45 120 0.55 419139 2 1 110 120 45 167 0.80 419140 19 160 170 50 214 1.10 419141 AP Vent Cowls Weight Order No [mm] [kg] AISI 316 110 0.41 98962 www.cous.com.u/stinless

AP Socket Clmps Weight Order No [mm] [mm] [kg] AISI 316 50 40 0.07 419134 75 40 0.21 419135 110 43 0.30 419136 160 43 0.40 419137 AP Pipe Sels (See pge 26.) Nominl i. Weight Order No. Order No Order No [mm] [kg] EPM FPM NBR 50 0.01 98400 98404 417037 75 0.02 98401 98405 417038 110 0.05 98402 98406 417039 125 0.06 419453 419454 417041 160 0.08 98403 98407 417040 200 0.10 98433 98437 417042 Note: Spre ACO Pipe sels re ville for ll pipe sizes. All sels incorporte the unique ACO Pipe doule lip sel rrngement for incresed reliility nd security. Both sel mterils re mechniclly interchngele therey fcilitting esy on-site upgrde from EPM to FPM, for exmple. For sel instlltion instructions, refer to the ppendices. To id identifiction, the sels re colour coded s follows: EPM sels re BLACK. FPM sels re GREEN. NBR sels re BLACK. 20 ACO Universl Luricnt Unit Weight Order No [kg] Tue 0.15 E80350000 Bucket 1.0 E80350001 AP Fixing Pltes Weight Order No. Order No [mm] [mm] [kg] Steel AISI 316 8.4 70 0.05 400525 400521

ACO STAINLESS AP Support Brckets with Ruer Infill Weight Order No. Order No [mm] [kg] Steel AISI 316 50 0.14 400533 400529 75 0.23 400534 400530 110 0.33 400535 400531 125 0.36 419854 419855 160 0.39 400536 400532 200 0.44 419451 419675 AP Support Brckets with Ruer Infill nd Stirrup Weight Order No. Order No [mm] [mm] [kg] Steel AISI 316 50 56 0.18 400541 400537 75 80 0.28 400542 400538 110 116 0.41 400543 400539 160 166 0.48 400544 400540 AP Support Brckets with Ruer Infill nd Key Weight Order No. Order No [mm] [mm] [kg] Steel AISI 316 50 120 0.16 400549 400545 75 133 0.26 400550 400546 110 150 0.38 400551 400547 160 175 0.44 400552 400548 21 AP Threded Support Poles M8 Length l Weight Order No. Order No [mm] [mm] [kg] Steel AISI 316 MB 1000 0.39 400557 400553 MB 90 0.03 400558 400554 MB 40 0.016 400559 400555 l AP Set for Axil Fixing Weight Order No Order No. [kg] Steel AISI 316 0.11 400565 400561 Note: Six M8 nuts included. www.cous.com.u/stinless

Instlltion Pipe Assemly 22 The instlltion of ACO Pipe should e in ccordnce with the recommendtions elow nd with AS/NZ3500. Ensure tht ll tools re in good condition, electric tools nd leds must hve current sfety tgs. Pipe stnds must e stle to crry the pipe with no movement nd there must e no cron steel or rsive mteril in contct with the stinless steel pipe mteril. Pipe Assemly The ssemly of pipe joints is quick nd strightforwrd, requiring only light ppliction of luricnt (see pge 20) to the chmfered pipe end. 1. Mke sure oth ends re clen nd free of dirt. 2. Mke sure tht the correct sel is in plce (see pges 20 nd 26). 3. Ensure tht the mting ends of the pipes nd fittings re clen nd free from contmintion. Push-fit the pipe end into the socket ut do not wedge into the socket recess. Use hlf rottionl movement to the right nd left s the pipes come together. 4. When the pipes re fully engged, pull the pipes ck 6mm to 12mm to llow for therml expnsion. With 60º temperture rise, stinless steel expnds t rte of 0.99mm per metre. Pipe Cutting If it is necessry to dpt or shorten pipe lengths, then the cut must e squre, clen nd redy chmfered. Cutters re ville from ACO (see pge 23). These tools re designed to form the edge evel on the mle spigoted end of the pipe. Cron steel wheels re not permitted.

ACO STAINLESS AP ACO Pipe Mnul Cutter 50-110 mm Weight Order No. [kg] In plstic cse 3.5 419363 AP Replcement iscs for ACO Pipe Mnul Cutter Weight Order No. [kg] For cutter 419363 0.005 419365 Note: Minimum order quntity 10 pieces. AP Pipe Mnul Cutters Weight Order No. [mm] [kg] 50-110 2.0 419364 110-160 2.0 400738 Note: While purchsing AP Mnul Cutter it is necessry order AP Holder for Mnul Cutting. AP Replcement iscs for Mnul Cutter isc Weight Order No. [kg] For cutter 419364 0.005 400578 For cutter 400738 0.005 400578 Note: Minimum order quntity 10 pieces. 23 AP Holders for Mnul Cutting Weight Order No. [mm] [kg] 125 3.5 419857 160 4.0 400742 Note: While order AP Holder for mnul cutting it is necessry order AP Mnul Cutter. www.cous.com.u/stinless

Instlltion Pipework Protection The instlltion of ACO Pipe should e in ccordnce with the recommendtions elow nd with AS/NZ3500. Below Ground Instlltion When pipework is to e instlled in the ground, plce the pipe in sndy ed of 75mm (minimum thickness) free of smll grvel, sticks, etc. The snd should e free of chlorides nd slt. uring instlltion, tke cre to not scrtch the surfce of the stinless with cron steel. Similrly, void sujecting the stinless steel pipes to welding nd grinding irorne hot prticles, metl shvings, nd chemicls which my cuse corrosion. Soil cover Where pipework is to e instlled eneth wter tle, pply the following soil depths: Pipe dimeters 50, 75, 110 Low density soil 15kg/m³ 400mm High density soil 23 kg/m³ 380mm Where the ground is permnently cold s experienced in some Alpine nd southern extremities of Austrli & New Zelnd, then the dringe my need to e heted. In generl however, the minimum permissile depth to void winter freezing of wter is 800mm. Note tht this recommendtion is pplicle where the ground does thw during spring nd ecomes quite wrm during summer. Bckfilling round the pipe cn only strt when the position of the pipe hs een checked nd pproved. Socket Clmps ACO Pipe, pipes nd fittings comprise push-fit socket joints. These will not e le to resist internl pressure eyond design limits unless precutions re mde to ensure tht the joints do not slide prt. In most cses, pproprite fixing to the uilding cn overcome this. If it is difficult however, or impossile to fix the pipes to the uilding, socket clmps (see pge 20) cn prevent the push-fit sockets nd spigot ends from sliding prt in the event of overlod or the genertion of excessive internl pressure. ACO Pipe socketed joints with socket clmps cn withstnd the following pressures: Pipe imensions [mm] Mximum Pressure [r] 50mm +2 75mm +2 110mm +2 160mm +1 24 Pipe dimeters 125, 160, 200, 250 Low soil density 15kg/m³ 580mm High soil density 23kg/m³ 650mm Structurl Penetrtions Where it is necessry for pipework to pss through the wlls, structurl decking or floors with wterproofing, the ACO Aplex Wll Sel system is ville, contct ACO.

ACO STAINLESS Pipework Support etils Horizontl Pipework The discretion of the instller should e pplied in ech instnce to ensure tht the pipe is dequtely supported. Generlly, when the pipe is completely full of wter, then the verticl deflection of the pipe etween rckets should not exceed 1.5mm. As guide, use the tle elow for rcket spcing on horizontl pipes. Pipe imeter [mm] Brcket Spcing [metres] 50 2.0 75 2.3 110 2.5 125 3.0 200 3.0 Verticl Pipework The lod pplied with fluid in the pipe is verticlly down. Position the highest rcket djcent to the top inlet of the pipe, then mount rckets t 3 metre spcings. At the ottom of the verticl pipe, use rcket within 200mm of the ottom. Fit rckets t ech chnge of pipework direction or junction points. The venting of verticl stcks shll e in complince with AS/NZ3500. Pipework should e t lest 35mm from the wll to fcilitte mintennce nd pinting. 25 Minimum nd Mximum Pipe Weights To ssist designers nd instllers with the selection of pproprite pipe supports, the tle elow sets out the weights for ll pipe sizes. Pipe Pipe Weight Pipe Weight imeter Empty Full [mm] [kg / m] [kg / m] 50 1.2 3.0 75 1.8 6.9 110 2.7 11.9 125 3.3 15.8 160 5.0 24.6 200 7.5 38.0 250 10.6 59.7 www.cous.com.u/stinless

Sel Mteril t ACO Pipe sockets re fitted with EPM sels s stndrd for regulr dringe pplictions. For prticulrly ggressive pplictions, FPM nd NBR sels re ville (see pge 20). Refer to the tle elow to ssess suitility, nd then contct ACO. EPM (Ethylene Propylene iene Monomer) EPM ws originlly developed during the 1950s for vehicle tyre pplictions. It reched wider pplictions ecuse of its suitility for outdoor use. FPM (Fluoroelstomer) FPM is fluorocron nd the est mteril for resistnce to hostile chemicl nd oil environments t norml nd elevted tempertures. This mteril is widely used in the chemicl nd phrmceuticl industries, ut is significntly more expensive thn EPM. NBR (Nitrile ruer) NBR hs good wter resistnce, excellent chemicl resistnce nd durility. Sel Assemly Replcement or Upgrde The doule lip sel is esily removed nd replced from the femle end of ll ACO Pipe, pipes nd fittings. This llows esy on-site upgrde of the sel mteril. Sel Instlltion Notes 1. If chnging the sel, ensure the correct size nd grde of sel is selected for the ppliction (see tle elow). 2. Ensure the sel itself nd the zone round the pipe nd/or fitting receiving the sel is clen, dry nd free from dust, grit nd ny metllic prticles. 3. Insert the dry sel into the pipe nd/or fitting recess. NOTE: the sel MUST e inserted so the doule seling lips fce wy from the opening of the pipe nd/or fitting. 4. o not use tools to id the ssemly process otherwise dmge to the pipes, fittings nd sels my occur. EPM FPM NBR Wter Resistnce Excellent Good Good 26 Chemicl Resistnce Acids Good Excellent Excellent Bses Good Good Good Solvent Resistnce (20 C) Alcohol Good Good Good Acetone Good Unsuitle Unsuitle Benzene Unstisfctory Good Unsuitle Oil Resistnce ASTM Oil No. 1 @ 20 C Fir Excellent Excellent @ 100 C Unstisfctory 150 C Excellent 150 C Good ASTM Oil No. 3 @ 20 C Unstisfctory Excellent Excellent @ 100 C Unstisfctory 150 C Excellent 150 C Good Fuel Resistnce ASTM Fuel B @ 20 C Unstisfctory Excellent Excellent Resistnces Oxidtion Excellent Outstnding Outstnding Ozone & Wethering Outstnding Outstnding Low Het Resistnce Mximum Continuous 130 C 205 C 80 C Mximum Intermittent 150 C 300 C 100 C Low Temperture Resistnce 50 C 20 C 30 C Gs Permeility Firly Low Very Low Very Low Physicl Strength Good Good Good Compression Set Resistnce Good Good Good Ter & Arsion Resistnce Good Good Good Cost Fctor (1 = low) 1 20 2

ACO STAINLESS Cre nd Mintennce All grdes of stinless steel will stin nd discolour due to surfce deposits nd cn never e 100% mintennce free. In order to chieve mximum corrosion resistnce, the surfce of the stinless steel must e kept clen. Fctors Affecting Mintennce Surfce contmintion nd the formtion of deposits must e prevented in order to mintin durle nd hygienic surfce. These deposits my e minute prticles of iron or rust from other mterils used on the uilding site which hve come in contct with the pipework. Cre must e tken to void the cutting of cron steels, including rer, nd the storge nd erection of scffolding, ner the pipework. Industril nd even nturlly occurring tmospheric conditions cn produce deposits tht cn lso e corrosive, e.g. slt deposits from mrine conditions. The working environment cn lso produce corrosive conditions e.g. high humidity, such s in swimming pool, incresing the speed of discolourtion nd therefore requiring mintennce to e crried out on more frequent sis. Mny cleners, sterilisers nd leches, when used in ccordnce with mnufcturers' instructions re sfe, ut if used incorrectly (e.g. wrm or concentrted), they cn cuse discolourtion nd corrosion on the surfce of ny qulity of stinless steel. Strong cid solutions re sometimes used to clen msonry nd tiles ut they should never e permitted to come into contct with metls, including stinless steel. If this should hppen the cid solution must e removed immeditely y copious pplictions of clen wter. Wire rushes nd wire wool must not e used to remove mrks or cement spillge s this will only serve to introduce iron impurities onto the mteril surfce. 27 Prolem Clening Agent Comments Routine clening Sop or mild detergent nd wter Sponge, rinse with clen wter, (such s wshing up liquid). nd wipe dry if necessry. Fingerprints Sop or wrm wter or orgnic solvent Rinse with clen wter, wipe dry if necessry. (e.g. cetone, lcohol). Stuorn stins nd discolourtion Mild clening solutions Rinse well with clen wter nd wipe dry. Oil nd grese mrks Orgnic solvents (e.g. cetone, lcohol). Clen fter with sop nd wter, rinse with clen wter nd dry Rust nd other corrosion products Oxlic cid. The clening solution should e Rinse well with clen wter (precutions for pplied with sw nd llowed to stnd cid cleners should e oserved). for 15 20 minutes efore eing wshed wy with wter. www.cous.com.u/stinless

Other ACO Product Lines ACO STAINLESS A rnge of high performnce stinless steel dringe chnnels, grtes, fl oor drins nd pipes for hygiene nd esthetic pplictions. ACO RAIN A rnge of grted trench dringe systems nd pits mde from 'Polycrete' polymer concrete. Grtes re ville in vrious mterils nd fi nishes for ll lodings. ACO CABLEMATE A rnge of electricl nd communiction cle jointing pits nd surfce ducting systems. ACO ACCESS A rnge of ductile iron, glvnised steel nd composite ccess covers in wide rnge of sizes nd confi gurtions from single to lrge multiprt units. ACO SPORT A rnge of surfce dringe systems nd ncillry products for sport fi elds, running trcks nd stdiums. ACO HOME A rnge of economicl domestic dringe products, idel for homes, grdens nd lndscped res. ACO Polycrete Pty Ltd ABN 65 050 102 942 www.cous.com.u Sles Hotlines Austrli 1300 765 226 New Zelnd 0800 448 080 Export +61 2 4747 4000 Emil sles@cous.com.u Technicl Services emil technicl@cous.com.u This Product Hndook is printed on FSC certifi ed pper which is sourced from well-mnged forests nd other controlled sources. New South Wles nd Hed Office 134-140 Old Bthurst Rod Emu Plins NSW 2750 Austrli Telephone +61 2 4747 4000 Fcsimile +61 2 4747 4060 Queenslnd 467 Tufnell Rod Bnyo QL 4014 Telephone (07) 3267 8700 Fcsimile (07) 3267 8711 coqld@cous.com.u Victori & Tsmni 9 Overses rive Nole Prk VIC 3174 Telephone (03) 9795 3666 Fcsimile (03) 9795 6444 covic@cous.com.u Western Austrli 33-35 Soronne Crescent Cnning Vle WA Telephone (08) 6250 3700 Fcsimile (08) 6250 3799 cow@cous.com.u South Austrli & Northern Territory Unit 14, 17-19 Churchill Rod North ry Creek SA 5094 Telephone (08) 8162 7800 Fcsimile (08) 8162 7899 cos@cous.com.u 2011 ACO Polycrete Pty Ltd. All resonle cre hs een tken in compiling the informtion in this document. All recommendtions nd suggestions on the use of ACO products re mde without gurntee since the conditions of use re eyond the control of the compny. It is the customer s responsiility to ensure tht ech product is fit for its intended purpose nd tht the ctul conditions re suitle. ACO Polycrete Pty Ltd pursues policy of continuous product development nd reserves the right to mend specifictions without notice. ISO 9001 QEC 1883 SAI Glol Assurnce Services CA0009 V-2011