DXXX SERIES IP SEALED DUAL-OMPARTMENT ENLOSURE PRODUT INFORMATION different sizes of wall mounting cases with separate terminal compartment for you to use in measurement & control application. These cases are able to be used with din EN0 rail (3mm). Hinge type of transparent cover (left-hand or right-hand hinge) for you to view the terminal, open and close the cover easily. Fastening pillars and guide grooves for vertical and horizontal installation of printed circuit boards. PG or Metric rated break points are designed for you to use the IP8 cable glands (PG or Metric type) well. TYPE A TYPE TYPE TYPE D DXXXUL SERIES DXXXU SERIES DXXXUNO SERIES DXXXLGNO SERIES 0
DXXXUL SERIES D00UL, D003UL, D00UL, D00UL, D009UL Example: D00UL PRODUT INFORMATION Material: UL9-V0 rating of P/AS (grey base, grey lid, hinge kit) UL9-V0 rating of Polycarbonate (transparent lid) olor: Light grey, similar to RAL038 with transparent lid. Recommended working temperature: -0º to +0º Ingress Protection: IP certified, EPDM gasket pre-installed. Gasket pre-installed ITEM No. MATERIAL EXTERNAL DIMENSION(mm) Transparent lid D00UL P/AS, UL9-V0 x x 93 D L D003UL P/AS, UL9-V0 x x D00UL D00UL P/AS, UL9-V0 P/AS, UL9-V0 3 x 8 x 0. x x 3. W Terminal compartment lid D009UL P/AS, UL9-V0 9 x 8 x 8 0
DXXXU SERIES D00U, D003U, D00U, D00U, D009U Example: D003U P R O D U T I N F O R M AT I O N Material: UL9-H rating of AS (grey base, gray lid, hinge kit) UL9-H rating of Polycarbonate (Transparent blue lid) olor: Light grey, similar to RAL 03 with transparent blue lid. Recommended working temperature: -0º to +80º Ingress Protection: IP certified, EPDM gasket pre-installed. Gasket pre-installed ITEM No. MATERIAL EXTERNAL DIMENSION(mm) Transparent blue lid D00U x x 93 D L D003U x x D00U D00U 3 x 8 x 0. x x 3. W Terminal compartment lid D009U 9 x 8 x 8 03
DXXXUNO SERIES D00UNO, D003UNO,D00UNO D00UNO, D009UNO Example: D009UNO PRODUT INFORMATION Material: UL9-H rating of AS(Grey base, gray lid) UL9-H rating of Polycarbonate(Transparent blue lid) olor: Light grey, similar to RAL 03 with transparent blue lid. Recommended working temperature: -0º to +80º. Ingress Protection: IP certified, EPDM gasket pre-installed. Gasket pre-installed ITEM No. MATERIAL EXTERNAL DIMENSION(mm) Transparent blue lid D00UNO x x 93 D L D003UNO x x D00UNO D00UNO 3 x 8 x 0. x x 3. W Terminal compartment lid D009UNO 9 x 8 x 8 0
DXXXLGNO SERIES D00LGNO, D003LGNO, D00LGNO D00LGNO, D009LGNO Example: D00LGNO PRODUT INFORMATION Material: UL9-H rating of AS. olor: Light grey, similar to RAL 03. Recommended working temperature: -0º to +80º. Ingress Protection: IP certified, EPDM gasket pre-installed. Gasket pre-installed ITEM No. MATERIAL EXTERNAL DIMENSION(mm) Gray lid D00LGNO D003LGNO x x 93 x x D L D00LGNO D00LGNO D009LGNO 3 x 8 x 0. x x 3. 9 x 8 x 8 W Terminal compartment lid 0
ONTENT TYPE A DXXXUL SERIES. abinets. Transparent lid 3. Terminal compartment lid. Hinge clip 3 8. Hinge bar. Locking hook. Lower locking hook 8. Screws for terminal compartment lid use remark: MXMM self tapping screws(pcs) TYPE DXXXU SERIES. abinets. Transparent blue lid 3. Terminal compartment lid. Hinge clip 3 8. Hinge bar. Locking hook. Lower locking hook 8. Screws for terminal compartment lid use remark: MXMM self tapping screws(pcs) TYPE DXXXUNO SERIES. abinets. Transparent blue lid 3. Terminal compartment lid. Screws for transparent blue lid use remark: M.XMM self tapping screws(pcs) 3. Screws for terminal compartment lid use remark: MXMM self tapping screws(pcs) TYPE D DXXXLGNO SERIES. abinets. Grey lid 3. Terminal compartment lid. Screws for grey lid use remark: M.XMM self tapping screws(pcs) 3. Screws for terminal compartment lid use remark: MXMM self tapping screws(pcs) 0
ASSEMLY INSTRUTION FOR DXXXUL SERIES (TYPE A), DXXXU(TYPE ) Left-hand hinge. To assemble the hinge bar on the left side of the cabinets.. To assemble the lower locking hook on the right side of the cabinets. 3. To assemble the hinge clip on the left side of the transparent lid.. To assemble the locking hook on the right side of the transparent lid. Finished product Right-hand hinge. To assemble the lower locking hook on the left side of the cabinets.. To assemble the hinge bar on the right side of the cabinets. 3. To assemble the locking hook on the left side of the transparent lid.. To assemble the hinge clip on the right side of the transparent lid. Finished product OTHER FEATURES Mounting brackets (Optional) an be assembled with the mounting brackets. Designed to assemble with the IP8 cable glands (PG or Metric type). MF-00LG(PS) 3. For PG 9 or M use.. For PG or M use. 3. For PG or M use.. For PG3. or M0 use. * Optional For PG or M use. Din EN0 rail (3mm) an be assembled with the din EN0 rail (3mm). Designed to assemble with the lock * not supply * not supply 0
Example for The Drilling & Assembly of The able Gland with D0XXX Series of Plastic ox. 3 Recommended bit size < A > DIA.0 mm < > DIA 9.0 mm < > DIA.0 mm D00UL, D00U, D00LGNO, D00UNO A Recommended bit size DIA.0 mm DIA 9.0 mm DIA.0 mm able Gland PG9 (or M) PG (or M) PG3. (or M0) A Front view ottom view D003UL, D003U, D003LGNO, D003UNO D00UL, D00U, D00LGNO, D00UNO A A Front view ottom view Front view ottom view D00UL, D00U, D00LGNO, D00UNO D009UL, D009U, D009LGNO, D009UNO A Front view ottom view A Front view ottom view 08
D00UL/D00U A Item Dimension able Gland A. mm 9.0 mm 0.8 mm PG 9 (or M) PG (or M) PG 3. (or M0) According to ISO 8-m D00UNO/D00LGNO Measuring DIM=L Tolerances 0. < L 3.0 mm 3.0 < L.0 mm.0 < L 30.0 mm 30.0 < L 0.0 mm 0.0 < L 00.0 mm 00.0 < L 000.0 mm ±0. mm ±0. mm ±0. mm ±0.3 mm ±0. mm ±0.8 mm A 09
D003UL/D003U A Item Dimension able Gland A. mm 9.0 mm 0.8 mm PG 9 (or M) PG (or M) PG 3. (or M0) D003UNO/D003LGNO According to ISO 8-m Measuring DIM=L Tolerances 0. < L 3.0 mm 3.0 < L.0 mm.0 < L 30.0 mm 30.0 < L 0.0 mm 0.0 < L 00.0 mm 00.0 < L 000.0 mm ±0. mm ±0. mm ±0. mm ±0.3 mm ±0. mm ±0.8 mm A 0
D00UL/D00U A Item Dimension able Gland A. mm PG 9 (or M) 9.0 mm PG (or M) D00UNO/D00LGNO 0.8 mm PG 3. (or M0) According to ISO 8-m Measuring DIM=L Tolerances 0. < L 3.0 mm ±0. mm 3.0 < L.0 mm ±0. mm.0 < L 30.0 mm ±0. mm 30.0 < L 0.0 mm ±0.3 mm A 0.0 < L 00.0 mm 00.0 < L 000.0 mm ±0. mm ±0.8 mm
D00UL/D00U D00UNO/D00LGNO Item Dimension able Gland A. mm 9.0 mm 0.8 mm PG 9 (or M) PG (or M) PG 3. (or M0) According to ISO 8-m Measuring DIM=L Tolerances 0. < L 3.0 mm 3.0 < L.0 mm.0 < L 30.0 mm 30.0 < L 0.0 mm 0.0 < L 00.0 mm 00.0 < L 000.0 mm ±0. mm ±0. mm ±0. mm ±0.3 mm ±0. mm ±0.8 mm
D009UL/D009U D009UNO/D009LGNO Item Dimension able Gland A. mm 9.0 mm 0.8 mm PG 9 (or M) PG (or M) PG 3. (or M0) According to ISO 8-m Measuring DIM=L Tolerances 0. < L 3.0 mm 3.0 < L.0 mm.0 < L 30.0 mm 30.0 < L 0.0 mm 0.0 < L 00.0 mm 00.0 < L 000.0 mm ±0. mm ±0. mm ±0. mm ±0.3 mm ±0. mm ±0.8 mm 3