RING-flex. Torsionally Rigid Disc Couplings US Partner for performance 1. RINGFEDER Products are available from MARYLAND METRICS

RINGFEDER Products are available from MARYLAND METRICS RING-flex Torsionally Rigid Disc Couplings US 008 Partner for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA phones: (40)358-3 (800)638-8 faxes: (40)358-34 (800)87-939 email: sales@mdmetric.com web: http:mdmetric.com RFQ form: http:mdmetric.comrfq.htm copyright 0 maryland metricsringfeder power transmission gmbh

A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 9 in Krefeld, Germany to fabricate and promote Friction Spring technology. Today we have expanded our offerings to top power transmission and damping products. Innovative thinking sets us apart and allows us to develop progressive and economical solutions to support our customers.

Special applications require special solutions Our extensive range of RINGFEDER POWER TRANSMISSION products can be applied to solve most applications. We don t just sell, but by understanding the individual requirements of our customers (e.g. loads on the components, easy installationremoval capability and reduction of production costs) assist you in every step with innovative engineering to plan efficient and technically mature solutions. 3

Introduction Basis of RING-flex Torsionally Stiff, Flexible Multiple-Disc Couplings RING-flex, Backlash-Free Couplings are a 00% steel construction. The flexible portion of this coupling consists of a disc pack developed with the help of FEM analysis and made of stainless steel. The steel hubs are connected to the disc packs by means of exact precision sleeves and highly resilient bolts. Depending on customer requirements, the hubs can be attached to axial misalignment radial misalignment the shafts in different ways, e.g. by means of Shrink Disc or - particularly inexpensive - with Locking Assemblies. This guarantees a really backlash-free connection of the two shaft ends that is simple and trouble free. The disc packs guarantee high transmissible torques while compensat ing for axial, radial and angular misalignments. angular misalignment 4

Content 0 New Pages Corporate Image Mounting with Clamping Hub 04 Introduction RING-flex 05 Content 06 Basis of RING-flex Couplings 3 Characteristics 34 RING-flex CCD 36 RING-flex CCS 38 RING-flex CHS 40 RING-flex CHD 4 RING-flex CHC 44 Technical Information Mounting with key 08 Characteristics 0 RING-flex GSHS RING-flex GDHD 6 RING-flex GCHC 8 RING-flex HD-FL (Large Sizes) 49 FAX Inquiry 5 We also offer Mounting with RINGFEDER Shrink Disc 0 Characteristics RING-flex XGSXHS 4 RING-flex XGDXHD 8 RING-flex XGCXHC RING-flex XHD-FL (Large Sizes) All technical details and information is non-binding and cannot be used as a basis for legal claims. The user is obligated to determine whether the represented products meet his requirements. We reserve the right at all times to carry out modifications in the interests of technical progress. Upon the issue of this catalogue all previous brochures and questionnaires on the products displayed are no longer valid. 5

Basis of RING-flex Coupling RING-flex : The Advantages of the System. No Tooth Backlash An important property for synchronous operation or for machines that are frequently used in startstop or reverse operation. RING-flex couplings are ideally suited to applications in which the positioning accuracy of the control system in both directions is important. 4. High Speeds Due to the very strict production tolerances, RING-flex allows precise vertical alignment and a high level of true running accuracy, making it ideal for applications involving high speeds even with irregular rotary forces.. Torsional Stiffness The design of the coupling guarantees a high level of torsional stiffness, which is an important property for applications in packaging machines, servomotor drives, printing presses and machine tools. 5. High Service Life The highly accurate disc pack insures optimum force distribution, and is designed to handle stresses from torque and misalignment, while providing a long service life. 3. High Temperatures RING-flex couplings can be used under extreme temperature conditions up to 40 C4 F, e.g. in high-temperature fluid pumps. 6. Maintenance-Free Operation RING-flex couplings are maintenance-free and do not require greasing or cleaning. Disc Pack and Hardware Disc pack and Hardware Shrink Disc Shrink Disc Hub Spacer sleeve Hub 6

4 bolt design Element Pack consists of individual discs Low or medium speeds Angular misalignment per disc pack Low or medium torque 6 bolt design Unitized Disc Pack Higher speeds Angular misalignment per disc pack Higher torque compact design Unitized Disc Pack High speeds Angular misalignment per disc pack Low to medium torques Low inertia 8 bolt design Unitized Disc Pack Angular misalignment 0.3 o - o per disc pack High torque 7

Characteristics Mounting with key RING-flex GSHS, GDHD, GCHC, HD-FL Multiple-disc coupling for compensating of axial and angular misalignments Versions with disc packs can also be used to compensate for radial misalignments. High torsional stiffness High transmissible torques Can be used up to temperatures of approx. 40 C4 F Maintenance-free operation Attachment of the coupling to the shafts with keys 8

RING-flex GSHS, GDHD, GCHC, HD-FL RING-flex GSHS Coupling without spacer RING-flex GDHD Coupling with standard spacer RING-flex GCHC Coupling with short spacer RING-flex HD-FL (Large Sizes) Coupling with standard spacer Ready for SAE Flywheel Mounting 9

Mounting with key RING-flex GSHS A, D 3, L F, S = main dimensions D, D D 4 L 0 T nom. T max. T L RPM axial angular J = max. max. bore size with keyway = pilot bore = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = max. speed = axial misalignment = angular misalignment = moment of inertia RING-flex HS-75-6 Size A D ; D D 3 D 4 L F S L 0 max. mm mm mm mm mm mm mm inches inches inches inches inches inches inches GS-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 HS-Series 7-6 3-6 75-6 35-6 40-6 400-6 650-6 00-6 00-8 -8 8 3.9 93 3.66 04 4.09 6 4.96 43 5.63 68 6.6 94 7.64 4 8.43 7.78 88 3.46 6.5 4.59 4 5.53 66.5 6.56 98.5 7.8 38 9.37 38 9.37 95.6 345 3.58 3.3 35.38 4.6 48.9 54. 75 3.0.8 0 4.3 35.4 45.8.4.8 3.5 00 3.9 0 4.7 5 4.9 50 5.9 80 7. 45.00 50.97 6.40.76 8 3.9 05 4.3 8 4.65 36 5.35 47.85 6.46 8 3.9 94 3. 5 4.53 36 5.35 69 6.65 69 6.65 05 8.0 54 0.00 0 0.39 4 5 5 9 9 0.75 5 0.98.8 36.4 36.4 49.93 59.3 50.97.7.7 65.56.76 75.95 3.54 0 4.33 39.5.56 45.77.7.36 75.95 3.54 5 4.9 5 4.9 6. 00 7.87 6.9 0.7 8. 0.3 8.6 0.34. 0.48.7 0 4. 6 5.5 0.6 0.6 0.8 7.5 0. 8.8 0.35 0.4 0.4 0.47 3 5 9 0.8 0.8. 0.87 8.0 3..7 06.9 4. 8. 4.7 8.6 4.7 4. 5.6 5.7 6.0 64. 6.5 96 7.7 40.6 9.5 86.5 3.4 98.8 3.9 0.4 4.7 3 5. 63 6.4 95 7.7.8 0.7 7. 0.7 348 3.7 43. 7.0 0

Example: RING-flex HS-75-6-50- type size D D HS 75-6 50 Sectional view Size T nom. T max. T RPM axial angular Weight J GS-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 HS-Series 7-6 3-6 75-6 35-6 40-6 400-6 650-6 00-6 00-8 -8 Nm Nm Nm min ± mm degree kg kg m in-lbs in-lbs ft-lbs ± inches lbs lb in 797 80 593 50 3 5 5045 8 7877 40 0.0.800 593 450 684 505 83 750 6638 350 949 400 4 4000 35403 6500 575 000 973 000 85866 0 3867 35 95 3 375 339 8 7567 335 86. 5.35.0 3897 3675 356 567 5 4956 594 3 0888 400 3773 00 69 3 00633 950 3 36750 3565 600 7597 8 3 7 3 7 54 40 79 58 79 58 56 5 56 5 8 6 4 0 3 3 6 46 0 8 80 33 80 07 63 5 4.000 739 4500 40 400 4000 3800 00 00 8400 6800 5400 40 3800 3400 00 00 500 00.4 0..5 0..8 0.. 0..4 0. 3. 0. 3.5 0. 4 0. 0.0 0.6 0.0 0.8 0.0 0.0. 0..4 0..7 0... 0.0.3 0. 0...6.8 4.4 5.3 4.3 9.5 6.7 4.8 9. 0. 6.4 36. 3. 5..3.8.5 5.4 5..5 8. 8. 4.7 3.4 5. 48.7 07.4 49 07 93 05 63 359.4 0.0.5 0.0 5.0 0.0 8.6 0.0.5 0.0 44.3 0.0 93.3 0. 0.6 0. 349.5 0.0.7 0.0 5.6 0.0 33.9 0.0 46.4 0.0 8.7 0. 85.9 0. 778. 0.8 778W 0.7 406..8 5995.

Mounting with key RING-flex GD A, D 3, L F, S = main dimensions D, D D 4 S L 0 T nom. T max. TL RPM axial angular radial J = max. bore size with keyway = pilot bore = spacer length = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = max. speed = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex GD--4 Size A D ; D D 3 D 4 L F S S L 0 max. mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches inches GD-Series 0-4 8 3.9 3.6 45.00 0-4 93 3.66 35.38 50.97-4 04 4.09 4.6 6.40 40-4 6 4.96 48.89.76 50-4 43 5.63 54.3 8 3.9-4 68 6.6 75.95 05 4.3-4 94 7.64.76 8 4.65 80-4 4 8.43 0 4.33 36 5.35 All bold dimensions are standard lengths 50.97.7.7 65.56.76 75.95 3.54 0 4.33 6.9 0.7 8. 0.3 8.6 0.34. 0.48.7 4. 6 5.5 0.6 0.6 0.8 57.4.76 66.6 84 3.3 9 3.6 97 3.8 7 4.6 5. 57 6.8 80 7.09 76 6.93 4 8.43 33 9.7 46 9.69 97.69 359 4.3

Example: RING-flex GD-40-6-75-80-00 type size D D S GD -4 7 Sectional view 0-4 0-4 -4 40-4 50-4 -4-4 80-4 Size T nom. T max. T L RPM axial angular radial Weight J GD-Series Nm Nm Nm min ± mm degree mm kg kg m in-lbs in-lbs ft-lbs ± inches inches lbs lb in 797 80 593 50 3 5 5045 8 7877 40 00 800 593 450 684 35 95 3 375 339 8 7567 335 86 535 0 3897 3675 356 8 3 7 3 7 54 40 79 58 79 58 56 5 56 5 4500 40 400 4000 3800 00 00.7 0. 3 0. 3.7 4. 0.7 4.9 0.9 6.4 6.9 0.7 8 0.3 0.0 0.6 0.0 0.0 0.7 0.03 0.9 0.9.7 0.07.8 0.07 4.4 3. 6.8 4 8.8 7.3 6..6 5.6 4. 3. 5.6 56.4 35.8 78.9 0.00 4.07 0.005 8.4 0.004 4. 0.0 38.4 0.0 76.4 6.5 0.098 333.9 0.67 569.4 3

Mounting with key RING-flex HD A, D 3, L F, S = main dimensions D, D D 4 S L 0 T nom. T max. TL RPM axial angular radial J = max. bore size with keyway = pilot bore = spacer length = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = max. speed = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex HD-75-6 Size A D ; D D 3 D 4 L F S S L 0 max. mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches inches HD-Series 7-6 7.78 35.38 47.85 3-6 88 3.46 45.77 6.46 75-6 6.5 4.59.36 8 3.9 35-6 4 5.53.76 94 3. 40-6 66.5 6.56 3.54 5 4.53 400-6 98.5 7.8 00 3.94 36 5.35 650-6 38 9.37 0 4.7 69 6.65 00-6 38 9.37 5 4.9 69 6.65 00-8 95.6 50 5.9 05 8.0-8 345 3.6 80 7. 54 0.00 All bold dimensions are standard lengths 0 0.39 4 5 5 9 9 0.75 5 0.98.8 36.4 49.9 59.3 39.5.56 45.77.7.36 75.95 3.54 5 4.9 5 4.9 6.3 00 7.9 7.5 0.3 8.8 0.35 0.4 0.4 0.47 3 5 9 0.8 0.8. 0.87 8. 3..3.36 00 3.94 80.76 3.5 00 40 3.94 5.5 00 40 3.94 5.5 00 40 3.94 5.5 40 80 5.5 7.09 40 80 5.5 7.09 4.4 8.4 5.6 7.8 00 50 7.9 9.8 4 50 8.8 9.8 40 5.5 39 5.47 79 7.05 9 8.6 00 40 3.94 5.5 6.3 6.69 7.48 80 0 50 7.09 8.7 9.84.4 80 0 0 7.09 8.66 0.4.8 80 50 3 7.09 9.84.4.99 3.6 4.7 50 3 4 500 9.84 5.35 6.93 9.69 5.4 39.4 43.4 50.4 9.94 5.45 7.0 9.78 50 5.4 0 64 650 0.8 4.6 5.6 7.6 9.06 Size A D :D D 3 L F S S L O max mm mm mm mm mm mm mm inches inches inches inches inches inches inches HD-Series 0-8 3500-8 457 8.00 9.00 00 8.00 50 0.00 95.63 368 4.50 84 7.5 9 9.00 34.3 40.56 59 0.8 98.7 67 4.68 7 9.7 4

Example: RING-flex HD-40-6-75-80-00 type size D D S HD 40-6 75 80 00 Sectional view Size T nom. T max. T L RPM axial angular radial Weight J HD-Series 7-6 3-6 75-6 35-6 40-6 400-6 650-6 00-6 00-8 -8 Nm Nm Nm min ± mm degree mm kg kg m in-lbs in-lbs ft-lbs ± inches inches lbs lb in 505 567 5 83 4956 750 6638 594 350 3 949 0888 400 400 4 3773 4000 00 35403 69 6500 3 575 00633 000 950 973 3 000 36750 85866 3565 0 600 3867 7597 8 6 4 0 3 3 6 46 0 8 80 33 80 07 36 5 4 000 739 8400 6800 5400 40 3800 3400 00 00 500 00...6 0.06. 0.08.5 0..8 0. 3.4 0.3.. 0..5 0..4 0.8 0.03.0 0.03.4.5.4.0 0.06.0 0.08.6 0.06 0. 0..5.. 0.07. 0.07. 0.07.7 0.09.6 0.0. 0.08.5 0..5 0.. 0.06.5.8 0.09.8 0.09.8 0.09 3.8. 0. 3 0.. 0.07.54 3.4 3. 6.8 6. 4.4 0.9.7 7.8 39.3.6 66.5 58.65 9.3 59 9 58.7 9.3 05.3 45.7.66 3.7 3.5 6.9 6.85 5. 0.7 3.6 8.5 40.8.9 68. 6 33.4 33 6 33.4 07.3 457.79 3.9 3.6 7. 7.4 5.7.6 4.6 9.9 4.3 6 37 6 37. 465.3 3.48 7.7 0.0008. 0.005 8.6 0.0093 3.7 0.0 7.5 76.8 0.4 44.4 0.0008.77 0.006 8.75 0.0099 33.69 0.0 74.45 4 83.79 0.7 435.8 0.334 0.346 0.334 4.068 3648..65 8935.4 0.346 8.099 3753.6.636 06. 0.0009.97 0.006 9.05 0.00 35.77 0.03 77.36 6.8 0.3 0.3.676 94. 0.008 9.64 Size T nom. T max. T L RPM RPM axial angular radial weight J HD-Series 0-8 3500-8 Nm Nm Nm min min +- mm degrees mm kg kg-m lb-in lb-in lb-ft unbalanced balanced +- inches inches lbs lb-in 640000 350 00000 440 80000 000 0000 0 36 0 3500 50 0 4800 3.0 0. 3.6 0.4 0.33 0.33..4 45 540 446 984 6.44 009 7.6 443 5

Mounting with key RING-flex GCHC A, D 3, L F, S = main dimensions D, D D 4 S L 0 T nom. T max. TL RPM axial angular radial J = max. bore size with keyway = pilot bore = spacer length = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = max. speed = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex HC-75-6 Size A D ; D D 3 D 4 L F S S L 0 max. mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches inches GC-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 HC-Series 7-6 3-6 75-6 35-6 40-6 400-6 8 3.9 93 3.66 04 4.09 6 4.96 43 5.63 68 6.6 94 7.64 4 8.43 7.78 88 3.46 6.5 4.59 4 5.53 66.5 6.56 98.5 7.8 3.6 35.38 4.6 48.89 54.3 75.95.76 0 4.33 35.38 45.77.36.76 3.54 00 3.94 45.77 50.97 6.40.76 8 3.9 05 4.3 8 4.65 36 5.35 47.85 63.46 8 3.9 94 3. 5 4.53 36 5.35 0 0.39 4 5 5 9 9 0.75 5 0.98.8 50.97.7.7 65.56.76 75.95 3.54 0 4.33 39.5.56 45.77.7.36 75.95 3.54 6.9 0.7 8. 0.3 8.6 0.34. 0.48.7 0 4. 6 5.5 0.6 0.6 0.8 7.5 0. 8.8 0.35 0.4 0.4 0.47 3 5 9 37.46 4.6 40.57.7 66. 68.68 85 3.35 84.8 3.34 3..3 37.6.48 46.3.8.0.7 6.6.46 7.8.83 37 5.39 5 5.94 50 5.9 85 7.8 06 8. 7 8.54 65 0.43 5.0 0. 4.34 7.6 5.0 56.3 6.5 75 6.89.6 8.37 5.8 9.9 6

Example: RING-flex GC-40-4-35-40 type size D D GC 40-4 35 40 Sectional view Size T nom. T max. T L RPM axial angular radial Weight J GC-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 HC-Series 7-6 3-6 75-6 35-6 40-6 400-6 Nm Nm Nm min ± mm degree mm kg kg m in-lbs in-lbs ft-lbs ± inches inches lbs lb in 797 80 593 50 3 5 5045 8 7877.40 0.0.800 593 450 684 505 83 750 6638 350 949 400 4 4000 35403 35 95 3 375 339 8 7567 335 86 535 0 3897 3675 356 567 5 4956 594 3 0888 400 3773 00 69 8 3 7 3 7 54 40 4500 40 400 4000 79 58 3800 79 58 56 5 00 56 5 00 8 6 4 0 3 3 6 46 0 8 80 07 8400 6800 5400 40 3800 3400.7 0. 3 0. 3.7 4. 0.7 4.9 0.9 6.4 6.9 0.7 8 0.3...6 0.06. 0.08.5 0.0.8 0. 0.0 0.0 0.0 0.8 0.03.3.3 0.4 0.0 0.0 0.6 0.0 0.7 0.03 0.8 0.03.0 0.03.5 3.3. 4.9.9 6.4 5.4.9 8. 7.9 0.8 3.8 0.7 45.6 8.9 63.7.48 3.3.89 6.4 6.0 3.7 9.7.4 7. 37.9 8.9 63.7 0.0008.8 0.007 5.94 0.009 0.00 0.0078 6. 0.06 5.80 0.034 6.0 0.07 44.00 0. 46. 0.0007.43 0.00 7.45 0.0080 7.0 0.08 6.3 0.78 0. 46.8 7

Mounting with key RING-flex HD-FL (Large Sizes) A, D 3, L F, S = main dimensions D S L 0 T nom. T max. TL RPM axial angular radial J = max. bore size with keyway = spacer length = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = max. speed = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex HDFL Size A D :D D 3 L F S S L O max mm mm mm mm mm mm mm inches inches inches inches inches inches inches HD-FL-Series 450-8 350-8 3400-8 0-8 3500-8 3 8.38 79.00 38 5.00 457 8.00 9.00 95 3.75 5 4.50 75 6.88 00 8.00 50 0.00 38 5.44 65 6.5 43 9.57 95.63 368 4.50 73.88 08 4.5 59 6.5 84 7.5 9 9.00 4 7 9 0.75 5 0.98 34.3 40.56 35 5.3 8 7.4 5 9.89 36.44 375 4.76 49 5.88 94 7.64 77 0.89 343 3.5 400 5.76 3 8.76 438 7.6 08 8.9 89.39 40 6.4 500 9.69 4 3.76 3 8.76.89 435 7.4 57 0.76 69 4.76 3 3.0 667 6.6 Size SAE J FLYWHEEL ADAPTER MOUNTING 0.5 4 6 8 4 450-8 X X X X X 350-8 X X X X X 3400-8 X X X X X 0-8 X X X 3500-8 X X SAE DIMENSIONS OD mm inches 34.3.375 35.4 3.875 466.7 8.375 57.5 0.375 57.5.500 673. 6.500 733.4 8.875 BC mm inches 95.3.65 333.4 3.5 438. 7.50 489.0 9.50 54.9.375 64.4 5.50 69. 7.50 QTY 8 8 8 8 6 DIA mm inches 0 0.4 0 0.4 () - Weight and J calculated with hub at maximum bore and minimum available flywheel adapter size. 3 3 3 3 7 0.65 7 0.65 0 0.78 OD BC QTY DIA = Outside Diameter = Bolt Circle Diameter = Numbers of Holes = Adapter Bolt Hole Size 8

Lo Example: RING-flex HDFL 350-8-4.00-.5-94 Lf S type size D SAE S HDFL 350-8 4.00.5 94 ø A ø D3 ø OD S Sectional view Size T nom. T max. T L RPM axial angular radial weight J () () Nm Nm Nm min +- mm degrees mm kg kg-m lb-in lb-in lb-ft unbalanced +- inches inches lbs lb-in HD-FL-Series 450-8 350-8 3400-8 0-8 3500-8 4500 40000 3500 0000 0 40000 60 5000 400 00000 6780 000 00 80000 400 00 940 840000 86400 650000 50 0 4 3 40 840 0 36 0 3400 500 800 500 00.5 0.06.0 0.08.5 0.0 3.0 0. 3.6 0.4 0.33 0.33 0.33 0.33 0.33 0.7 0.03 0.9.3.6 0.06.9 0.08 0.8 0.03.0.4 0.06.8 0.07. 0.08..3 0.09 46 58 7 8 489 395 87 47 58 8 67 7 50 40 887 3 48 9 0.64 56 0.943 33.47 858 6.533 3 7.44 589 0.66 566 0.947 337.45 8378 6.65 7.43 59563 0.956 368 9.03 6565 9

Characteristics Mounting with RINGFEDER Shrink Disc RING-flex XGSXHS, XGDXHD, XGCXHC, XHD-FL Multiple-disc coupling for compensating of axial, angular and radial misalignments Permanently backlash-free attachment of the multipledisc coupling by means of RINGFEDER Shrink Disc Overall length adaptable to customer requirements by the use of various center spacers (XGDXHD, XGCXHC) Vehicle Dyno High torsional stiffness Backlash-free transmission of high torques Can be used up to temperatures of approx. 40 C4 F Maintenance-free operation Pump Drive 0

RING-flex XGSXHS, XGDXHD, XGCXHC, XHD-FL RING-flex XGSXHS Coupling without spacer RING-flex XGDXHD Coupling with standard spacer RING-flex XGCXHC Coupling with short spacer RING-flex XHD-FL (Large Sizes) Coupling with standard spacer ready for SAE flywheel mounting

Mounting with RINGFEDER Shrink Disc RING-flex XGSXHS A, L F, S, D 3 = main dimensions D, D D D 4 L 0 T nom. T max. T L RPM axial angular = max. bore size = maximum Shrink Disc size = pilot bore = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = max. speed = axial misalignment = angular misalignment J = moment of inertia RING-flex XHS-3-6-36 Size A D D ; D D 3 D 4 L F S L 0 XGS-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 7-6 3-6 75-6 35-6 40-6 400-6 650-6 00-6 00-8 -8 mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches 8 3.9 93 3.66 04 4.09 6 4.96 43 5.63 68 6.6 94 7.64 4 8.43 XHS-Series 7.78 88 3.46 7 4.59 40 5.53 67 6.56 98 7.8 38 9.37 38 9.37 95.6 345 3.58 36 44 6 80 5 44 50 68 80 0 5 65 65 95 40 3.6 36.4 48.89 5.05.76 75.95 85 3.35 95 3.74 37.44 4.65.36.76 5 4.53 95 3.74 5 4.9 5 4.9 6.0 7.48 ) Maximum Torque Capacity (T max. ) may be limited by shaft size. See page 45. 45.00 50.97 6.40.76 8 3.9 05 4.3 8 4.65 36 5.35 47.85 6.46 8 3.9 94 3. 5 4.53 36 5.35 69 6.65 69 6.65 05 8.0 54 0.00 50.97.7.7 65.56.76 75.95 3.54 0 4.33 0 0.39 40.56 4 45 5.77 5 9.7 9 0.75.36 5 75 0.98.95.8 3.54 36 5.4 4.9 36 5.4 4.9 49.93 6. 59.3 00 7.87 6.9 0.7 8. 0.3 8.6 0.34. 0.48.7 4 5.5 0.6 0.6 0.8 7.6 0. 8.9 0.35 0.4 0.4 0.47 3 5 9 0.8. 0.87 8.0 3.7 06.9 4. 8. 4.65 8.6 4.67 4. 5.6 5.7 6 64 6 96 7.7 40.6 9.47 86.6 3.4 98.8 3.89 0.4 4.74 3 5.0 63 6.4 95 7.68 7 0.66 7. 0.7 348 3. 43 7.0

Example: RING-flex XHS-3-6-44-3-36 type size D D D XHS 3-6 44 3 36 Sectional view Size T nom. T max. T L RPM axial angular Weight J XGS-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 XHS-Series 7-6 3-6 75-6 35-6 40-6 400-6 650-6 00-6 00-8 -8 () Nm Nm Nm min ± mm degree kg kg m in-lbs in-lbs ft-lbs ± inches lbs lb in 797 80.593 50.3 5 5.045 8 7.877.40 0.0.800 5.93.450.684 505 83 750 6638 350 949 400 4 4000 35403 6500 575 000 973 000 85866 0 3867 35 95 3 375 339 8 7567 335 86 535 0 3897 3675 356 567 5 4956 594 3 0888 400 3773 00 69 3 00633 950 3 36750 3565 600 7597 8 3 7 3 7 54 40 79 58 79 58 56 5 56 5 8 6 4 0 3 3 63 46 0 8 80 33 80 07 36 5 4 000 739 4500 40 400 4000 3800 00 00 8400 6800 5400 40 3800 3400 00 00 500 00.4 0.06.5 0.06.8 0.07. 0.08.4 0.09 3. 0.3 3.5 0.4 4 0.6 0.0 0.0 0.8 0.03.0..4 0.06.7 0.07...3 0. 0 0.8 4.8 6. 3.9 8.6 6. 3.4 0.3.7 4.9 3 5 36 78.3.8.4 5.4 5..5 8. 8. 5 3 5 49 07 49 07 93 05 63 359 0.0039 4.74 0.00 8.89 0.00574 9. 0.0 38.00 0.084 97.0 0 7.40 0.0768 6. 0.9 758. 0.0007.46 0.005 5.03 0.00 33.9 46.4 0.035 9 0.084 86 0.8 778 0.8 778 0.4 406.7 5995 3

Mounting with RINGFEDER Shrink Disc RING-flex XGDXHD A, L F, S = main dimensions D, D D D 4 S L 0 T nom. T max. T L RPM axial angular radial J = max. bore size = maximum Shrink Disc size = pilot bore = spacer length = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = max. speed = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex XHD-3-6-36 Size A D D ; D D 3 D 4 L F S S L 0 XGD-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 mm mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches inches 8 3.9 93 3.66 04 4.09 6 4.96 43 5.63 68 6.6 94 7.64 4 8.43 XHD-Series 7 37 7-6.78 44.44 3-6 88 3.46 50 4.65 75-6 7 4.59 68.36 35-6 40 5.53 80.76 40-6 67 6.56 0 5 4.53 400-6 98 7.8 5 95 3.74 650-6 38 9.37 65 5 4.9 00-6 38 9.37 65 5 4.9 00-8 95.6 95 6.0-8 345 3.58 40 7.48 All bold dimensions are standard 36 44 6 80 5 3.6 36.4 48.89 5.05.76 75.95 85 3.35 95 3.74 45.00 50.97 6.40.76 8 3.9 05 4.3 8 4.65 36 5.35 47.85 6.46 8 3.9 94 3. 5 4.53 36 5.35 69 6.65 69 6.65 05 8.0 54 0.00 0 0.39 4 5 5 9 9 0.75 5 0.98.8 36.4 36.4 49.93 59.3 50.97.7.7 65.56.76 75.95 3.54 0 4.33 40.56 45.77.7.36 75.95 3.54 5 4.9 5 4.9 6. 00 7.87 6.9 0.7 8. 0.3 8.6 0.34. 0.48.7 0 4. 6 5.5 0.6 0.6 0.8 7.6 0. 8.9 0.35 0.4 0.4 0.47 3 5 9 0.8. 0.87 8.0 3.7.36.76 00 3.94 00 3.94 00 3.94 40 5.5 40 5.5 4.4 5.6 00 7.87 4 8.8 57.4.76 66. 84 3.3 9 3.6 97 3.8 7 4.6 5. 00 3.94 80 3.5 40 5.5 40 5.5 40 5.5 80 7.09 80 7.09 8.4 7.8 50 9.84 50 9.84 40 5.5 00 3.94 80 7.09 80 7.09 80 7.09 50 9.84 5.4 9.94 0.8 40 5.5 39 5.47 6. 0 8.7 0 8.66 50 9.84. 3 5.35 39.4 5.45 50 0.47 64 4.57 57 6.8 80 7.09 76 6.93 4 8.43 33 9.7 46 9.69 97.69 350 3.78 79 7.05 6.69 50 9.84 0.4.4 3 4.7 4 6.93 43.4 7.0 5.44 650 5.59 9 8.6 7.48.4 0.8 3.99 500 9.69 50.4 9.78 0 7.56 9.06 4

Example: RING-flex XHD-35-6---75-40 type size D D D S XHD 35-6 75 40 Sectional view Size T nom. T max. T L RPM. axial angular radial Weight J ) Nm Nm Nm min ± mm degree mm kg kg m in-lbs in-lbs ft-lbs ± inches inches lbs lb in XGD-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 797 80 593 50 3 5 5045 8 7877 40 00 800 593 450 684 XHD-Series 35 95 3 375 339 8 7567 335 86 535 0 3897 3675 356 9 3 7 3 7 54 40 79 58 79 58 56 5 56 5 4500 40 400 4000 3800 00 00.7 0. 3 0. 3.7 4. 0.7 4.9 0.9 6.4 6.9 0.7 8 0.3 7-6 8. 0.8.5. 505 567 6 8400 0.03 0.06 3-6 83 5 4956 4 0 6800..0 0.03..5 75-6 750 6638 594 3 3 5400.6 0.06.4. 0.07.8 0.09 35-6 350 949 3 0888 63 46 40. 0.08.5. 0.07.8 0.09 40-6 400 4 400 3773 0 8 3800.5 0.0.4. 0.07.8 0.09 400-6 4000 35403 00 69 80 33 3400.8 0..0 0.06.7 0.09 650-6 6500 575 3 00633 80 07 00 3.4 0.3.0 0.08.6 0.0 3.8 00-6 000 973 950 3 36 00..4.6 0.06. 0.08. 0. 00-8 000 85866 36750 3565 5 4 500. 0.09.4 0.06.8 0.07-8 0 3867 600 7597 000 739 00.5 0..6 0.06.8 0.07. 0.09 ) Maximum Torque Capacity (T max ) may be limiited shaft size. See page 45. 0.9 0.0354 0.0394 0.0394. 7. 7.4 5.7 0.0669.8 0.09. 0.07.5 3.4 3. 6.8 6.5 4.4 0 3 8 39 67 59 9 59 9 3 49 05 453.7 3.7 3. 6.9 6.8 5. 4 9 4 3 68 33 33 6 56 07 457.5 5.5 4. 9.0 5.5. 9. 0.3 5.3 33.7 9.0 4.9 3..8 47.9 05.6.8 3.9 3.3 7. 7. 5.7 5 9 4 6 37 6 37 465 3.5 7.7 0.0008. 0.005 8.6 0.009 3.7 0.0 7.5 76.8 0.4 44. 0.334 4 0.334 4.068 3648.65 8935 0.0086 6.35 0.003.3 0.00735 5.. 77 53.9 0.0378 9.3 0.0684 33.6 5 394.8 0.863 978.3 0.0008.77 0.006 8.75 0.00 33.7 0.0 74.5 4 83.8 0.7 435. 0.346 8 0.346 8.099 3754.636 06 0.0009.97 0.006 9.05 0.00 35.8 0.03 77.4 6. 0.3 0.3.676 94 0.008 9.64 5

Mounting with RINGFEDER Shrink Disc RING-flex XHD A, L F, S = main dimensions D, D = max. bore size D = maximum Shrink Disc size S = spacer length L 0 = overall length T nom. = nominal torque capacity T max. = max. torque capacity T L = tightening torque screws disc pack T S = tightening torque Shrink Disc RPM = max. speed axial angular radial J = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex XHD-3-6-36 Size A D D :D D 3 L F S S L O max mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches XHD-Series 450-8 3 8.38 0 85 3.35 38 5.44 350-8 79.00 5 4.53 65 6.5 3400-8 38 5.00 40 7.48 43 9.57 0-8 457 8.00 80 9.06 95.63 3500-8 9.00 3 95.6 368 4.50 ) Maximum Torque Capacity (T max ) may be limited by shaft size. See page 45. 73.88 08 4.5 59 6.5 84 7.5 9 9.00 4 7 9 0.75 5 0.98 34.3 40.56 7 4.6 68 6. 0 7.94 59 0.8 98.7 64 0.38 384 5.0 59 0.44 67 4.68 7 9.7 6

Example: RING-flex XHD-35-6---75-40 type size D D D S XHD 35-6 75 40 Sectional view Size T nom. T max. T L RPM RPM axial angular radial weight J ) Nm Nm Nm min min +- mm degrees mm kg kg-m lb-in lb-in lb-ft unbalanced balanced +- inches inches lbs lb-in XHD-Series 450-8 350-8 3400-8 0-8 3500-8 4500 40000 3500 0000 330 0000 640000 350 00000 00 80000 00 40000 67800 0000 440 80000 000 0000 50 0 4 3 40 840 0 36 0 0 000 5000 9800 400 0 3500 50 0 4800.5 0.06.0 0.08.5 0.0 3.0 0. 3.6 0.4 0.33 0.33 0.33 0.33 0.33 0.0 0.8 0.03 0.9..4 0 45 5 3 87 45 540 446 984 0.7 399 0.479 635.378 86 6.44 009 7.6 443 7

Mounting with RINGFEDER Shrink Disc RING-flex XGCXHC A, L F, S = main dimensions D, D = max. bore size D = max. Shrink Disc size D 4 = pilot bore S = spacer length L 0 = overall length T nom. = nominal torque capacity T max. = max. torque capacity T L = tightening torque screws disc pack RPM = max. speed axial angular radial J = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex XHC-3-6-36 Size A D D ; D D 3 D 4 L F S S L 0 XGC-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 mm mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches inches 8 3.9 93 3.66 04 4.09 6 4.96 43 5.63 68 6.6 94 7.64 4 8.43 XHC-Series 7-6 3-6 75-6 35-6 40-6 400-6 7.78 88 3.46 7 4.59 40 5.53 67 6.56 98 7.8 36 44 6 80 5 44 50 68 80 0 5 3.6 36.4 48.89 5.05.76 75.95 85 3.35 95 3.74 37.44 4.65.36.76 5 4.53 95 3.74 45.77 50.97 6.40.76 8 3.9 05 4.3 8 4.65 36 5.35 47.85 63.46 8 3.9 94 3. 5 4.53 36 5.35 ) Maximum Torque Capacity (T max ) may be limited by shaft size. See page 45. 0 0.39 4 5 5 9 9 0.75 5 0.98.8 50.97.7.7 65.56.76 75.95 3.54 0 4.33 40.56 45.77.7.36 75.95 3.54 6.9 0.7 8. 0.3 8.6 0.34. 0.48.7 4. 6 5.5 0.6 0.6 0.8 7.6 0. 8.9 0.35 0.4 0.4 0.47 3 5 9 37.46 4.6 40.57.7 66.6 68.68 85 3.35 84.8 3.34 3..3 37.6.48 46.3.8..7 6.5.46 7.9.83 37 5.39 5 5.94 50 5.9 85 7.8 06 8. 7 8.54 65 0.43 5.0 0. 4.34 7.6 5.0 56.3 6.5 75 6.89.6 8.37 5.7 9.9 8

Example: RING-flex XHC-7-6-44-3-36 type size D D D XHC 7-6 44 3 36 Sectional view Size T nom. T max. T L RPM. axial angular radial Weight J XGC-Series 0-4 0-4 -4 40-4 50-4 -4-4 80-4 XHC-Series 7-6 3-6 75-6 35-6 40-6 400-6 Shaft Size () Nm Nm Nm min ± mm degree mm kg kg m in-lbs in-lbs ft-lbs ± inches inches lbs lb in 797 80 593 50 3 5 5045 8 7877 40 00 800 593 450 684 505 83 750 6638 350 949 400 4 4000 35403 35 95 3 375 339 8 7567 335 86 535 0 3897 3675 356 567 5 4956 594 3 0888 400 3773 00 69 8 3 7 3 7 54 40 79 58 79 58 56 5 56 5 8 6 4 0 3 3 63 46 0 8 80 33 ) Maximum Torque Capacity (T max ) may be limited by shaft size. See page 45. 4500 40 400 4000 3800 00 00 8400 6800 5400 40 3800 3400.7 0. 3 0. 3.7 4. 0.7 4.9 0.9 6.4 6.9 0.7 8 0.3...6 0.06. 0.08.5 0.0.8 0. 0.00 0.00 0.00 0.8 0.03 0.039 0.039.3.3 0.3 0.0 0.4 0.0 0.0 0.7 0.03 0.7 0.03 0.7 0.03 4.4 3.3 7.3 4. 9 7. 5.9 9.4 0.7 4.7 3.4 7. 59.7 4.4.5 3.3.9 6.4 6. 3.7 9.7.4 7 38 9 64 0.0049 5.0 0.0087 9.80 0.00474 6.0 0.035 4.0 0.000 68. 74 6. 0.089 4. 0.9 65.80 0.0007.43 0.00 7.45 0.008 7. 0.08 6.3 0 7 0. 46 9

Mounting with RINGFEDER Shrink Disc RING-flex XHD-FL (Large Sizes) A, L F, S = main dimensions D, D = max. bore size D = maximum Shrink Disc size D 4 = pilot bore S = spacer length L 0 = overall length T nom. = nominal torque capacity T max. = max. torque capacity T L = tightening torque screws disc pack RPM = max. speed axial angular radial J = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex XHDFL Size A D D D 3 L F S S L O max mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches XHD-FL-Series 450-8 350-8 3400-8 0-8 3500-8 3 8.38 79.00 38 5.00 457 8.00 9.00 0 40 80 3 85 3.35 5 4.53 7.48 9.06 95.6 38 5.44 65 6.5 43 9.57 95.63 368 4.50 73.88 08 4.5 59 6.5 84 7.5 9 9.00 4 7 9 0.75 5 0.98 34.3 40.56 35 5.3 8 7.4 5 9.89 36.44 375 4.76 49 5.88 94 7.64 77 0.89 343 3.5 400 5.76 3 8.76 438 7.6 08 8.9 89.39 40 6.4 500 9.69 4 3.76 3 8.76.89 435 7.4 57 0.76 69 4.76 3 3.0 667 6.6 Size SAE J FLYWHEEL ADAPTER MOUNTING 0.5 4 6 8 4 450-8 X X X X X 350-8 X X X X X 3400-8 X X X X X 0-8 X X X 3500-8 X X OD BC SAE DIMENSIONS mm 34.3 35.4 466.7 57.5 57.5 673. 733.4 inches.375 3.875 8.375 0.375.500 6.500 8.875 mm 95.3 333.4 438. 489.0 54.9 64.4 69. inches.65 3.5 7.50 9.50.375 5.50 7.50 QTY 8 8 8 8 6 DIA mm 0 0 3 3 7 7 0 inches 0.4 0.4 3 3 0.65 0.65 0.78 () - Weight and J calculated with hub at maximum bore and minimum available flywheel adapter size. () - Maximum Torque Capacity (T max. ) may be limited by shaft size. See page 45. OD BC QTY DIA = Outside Diameter = Bolt Circle Diameter = Numbers of Holes = Adapter Bolt Hole Size

Example: RING-flex XHD 350-8-40-4.00-.5-94 A LF Lo S Typtype Größesize D D SAE S XHD 350-8 40 4.00.5 94 Ø A Ø D3 Ø D Ø D,D Ø OD S DIA A BC Sectional view Size T nom. T max. T L RPM axial angular radial weight J () () () Nm Nm Nm min +- mm degrees mm kg kg-m lb-in lb-in lb-ft unbalanced +- inches inches lbs lb-in XHD-FL-Series 450-8 350-8 3400-8 0-8 3500-8 4500 40000 3500 0000 0 40000 60 5000 400 00000 6780 000 00 80000 400 00 940 840000 86400 650000 50 0 4 3 40 840 0 36 0 3400 500 800 500 00.5 0.06.0 0.08.5 0.0 3.0 0. 3.6 0.4 0.33 0.33 0.33 0.33 0.33 0.7 0.03 0.9.3.6 0.06.9 0.08 0.8 0.03.0.4 0.06.8 0.07. 0.08..3 0.09 46 58 7 8 489 395 87 47 58 8 67 7 50 40 887 3 48 9 0.64 56 0.943 33.47 858 6.533 3 7.44 589 0.66 566 0.947 337.45 8378 6.65 7.43 59563 0.956 368 9.03 6565 3

Characteristics Mounting with Clamping Hub RING-flex CCS, CCD Multiple-disc coupling with axial, angular and parallel (CCD) misalignment capability Aluminum Hub Construction for low intertia and weight, high speeds Minimized dimensions Can be used up to temperatures of approx. 40 C4 F Maintenance-free operation Machine Tool RING-flex CHS, CHD, CHC Multiple-disc coupling for compensating of axial, angular and radial (CHD and CHC) misalignments Permanently backlash-free attachment of the disc coupling by means of clamping hub Overall length adaptable to customer requirements through the use of different spacer sleeves (CHD) or very short length with close coupled sleeve (CHC) High torsional stiffness Backlash-free transmission of high torques Can be used up to temperatures of approx. 40 C4 F Maintenance-free operation 3

RING-flex CCS, CCD, CHS, CHD, CHC RING-flex CCS Aluminum Clamping Hub Coupling without spacer RING-flex CCD Aluminum Clamping Hub Coupling with standard spacer RING-flex CHS Clamping Hub Coupling without spacer RING-flex CHD Clamping Hub Coupling with standard spacer RING-flex CHC Clamping Hub Coupling with short spacer 33

Mounting with Clamping Hub RING-flex CCS A, F, L F, S = main dimensions D, D = max. bore size L 0 = overall length T nom. = nominal torque capacity T max. = max. torque capacity T L = tightening torque screws disc pack T S = tightening torque Clamping Hub RPM = max. speed axial = axial misalignment angular = angular misalignment J = moment of inertia RING-flex CCS-7-6-6-8 Size A D ; D D ; D F L F S L 0 min. max. mm mm mm mm mm mm mm inches inches inches inches inches inches inches CCS-Series 9-6 7-6 3-6 56. 7.83 93 3.66 4 5 9 0.75 8..8 40.57.36 58-6.8 -.44 77-8 3.03-3.9 98-00 3.86-3.94 5 0.98 3. 35.38.9 0. 3.5 0.4 4.8 0.9 5.9.08 65.5.58 74.8.94 Shaft Diameter mm inches 6 0 0.4 0.39 0 8 0.39 0.7 8 0.7.8 50.8.97 50 80.97 3.5 h7 Shaft Tolerance mm inches +0.0-0.0006 +0.0-0.0007 +0.0-0.0008 +0.0-0.000 +0.0-0.00 34

compact design Example: RING-flex CCS-7-6-6-8 type size D D CCS 7-6 6 8 Sectional view Size T nom. T L RPM. axial angular Weight J () Nm Nm min ± mm degree kg kg m in-lbs ft-lbs ± inches lbs lb in CCS-Series 9-6 7-6 3-6 50 38 340 09 0 4868 6 4 8 6 4 0 0000 8400 6800 0.4 0.06 0.0 0.6 0.3 0.66 0.6.3.07.36 0.000 4 0.0005.6 0.006 5.48 Size D ; D mm inches () Screws TS Nm ft-lb 4 5 6 8 9 0 4 5 8 3 35 38 40 4 45 48 50 5 9 0.63 0.7 0.75 0.79 0.87 0.94 0.98.0.8.6.38.50.57.65.77.89.97.7.36 lb-ft 9-6 Nm 0 0 50 33 M8 lb-in 9974 06 5 38 4 Nm 00 0 0 40 50 4 M6 lb-in 797 885 974 06 5 39 38 0 7-6 Nm 0 50 3 65 M0 lb-in 68 859 3 3 567 83 9 48 Nm 40 50 0 340 33 M8 lb-in 4 3 3 6 83 09 4 3-6 Nm 40 80 365 3 40 4 500 5 0 65 M0 lb-in 4 478 744 83 33 345 377 407 445 469 4868 48 Nm 380 400 4 4 500 33 M8 lb-in 3363 3540 3806 4 445 4 () Maximum Torque Capacity (T max ) depends on shaft size () Recommend shaft tolerance is h7 - See Chart on facing page 35

Mounting with Clamping Hub RING-flex CCD A, F, L F, S = main dimensions D, D S L 0 T nom. T max. T L T S RPM axial angular radial J = max. bore size = spacer length = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = tightening torque Clamping Hub = max. speed = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex CCD-3-6--40 Size A D ; D D ; D F L F S S L 0 min. max. CCD-Series 9-6 7-6 3-6 mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches inches 56 4 58-6 5.9 4.3 64.3.0 5.8.8 -.44 0.98 0. 6.53 7 9 40 77-8 3 3.5 7 79.83 0.75.57 3.03-3.9. 0.4 0.67 3. 93 8 97-00 35 4.8 0.6.6 3.66.0.36 3.8-3.94.38 0.9 0.8 3.57 Shaft Diameter mm inches 6 0 0.4 0.39 0 8 0.39 0.7 8 0.7.8 50.8.97 50 80.97 3.5 h7 Shaft Tolerance mm inches +0.0-0.0006 +0.0-0.0007 +0.0-0.0008 +0.0-0.000 +0.0-0.00 36

compact design L 0 Ø F Example: RING-flex CCD-3-6--40 S L F type size D D CCD 3-6 40 Ø A Ø D Ø D S M Sectional view Size T nom. T L RPM. axial angular radial Weight J CCD-Series 9-6 7-6 3-6 () Nm Nm min ± mm degree mm kg kg m in-lbs ft-lbs ± inches inches lbs lb in 50 38 6 4 0000 0.8 0.03 0. 0.008 0.36 0.8 0.000 0.89 340 09 8 6 8400 0. 0.009 0.73.6 0.0007.48 0 4686 4 0 6800. 0.3 0.0.3.87 0.003 7.94 Size D ; D mm inches () Screws TS Nm ft-lb 4 5 6 8 9 0 4 5 8 3 35 38 40 4 45 48 50 5 9 0.63 0.7 0.75 0.79 0.87 0.94 0.98.0.8.6.38.50.57.65.77.89.97.7.36 lb-ft 9-6 Nm 0 0 50 33 M8 lb-in 9974 06 5 38 4 Nm 00 0 0 40 50 4 M6 lb-in 797 885 974 06 5 39 38 0 7-6 Nm 0 50 3 65 M0 lb-in 68 859 3 3 567 83 9 48 Nm 40 50 0 340 33 M8 lb-in 4 3 3 6 83 09 4 3-6 Nm 40 80 365 3 40 4 500 5 0 65 M0 lb-in 4 478 744 83 33 345 377 407 445 469 4868 48 Nm 380 400 4 4 500 33 M8 lb-in 3363 3540 3806 4 445 4 () Maximum Torque Capacity (T max ) depends on shaft size () Recommend shaft tolerance is h7 - See Chart on facing page 37

Mounting with Clamping Hub RING-flex CHS A, D, L F, S = main dimensions D, D D 3 L 0 T nom. T max. T L T S RPM axial angular J = max. bore size = pilot bore = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = tightening torque Clamping Hub = max. speed = axial misalignment = angular misalignment = moment of inertia RING-flex CHS-3-6-35 Size A D D ; D D 3 L F S L 0 max. mm mm mm mm mm mm mm inches inches inches inches inches inches inches CHS-Series 7-6 3-6 75-6 35-6 7.78 88 3.46 6.5 4.59 4 5.53 47.85 6.5.46 8 3.3 98 3.9 5 0.98 35.38 45.77.36 Other sizes available upon request () Nominal (Tnom) and Maximum (Tmax) depend on shaft size. See Chart Below 0 0.39 4 5 5 9 9 0.75 39.5.56 45.77.7.36 7.5 0.3 8.8 0.35 0.4 0.4 0.47 86.5 3.4 98.8 3.89 0.4 4.74 3 5. Size D ; D mm inches () CH-Series 7-6 3-6 75-6 35-6 5 6 8 9 0 4 5 8 3 35 9 0.63 0.7 0.75 0.79 0.87 0.94 0.98.0.8.6.38 Nm 65 75 00 5 40 80 lb-in 575 664 797 885 08 39 505 593 Nm 0 50 80 0 50 0 350 3 lb-in 06 38 593 859 3 6 98 386 Nm 3 40 4 lb-in 386 377 4337 Nm 340 380 40 lb-in 09 3363 377 () Recommended shaft tolerance is h7 - See Chart on facing page 38

Example: RING-flex CHS-75-6-35-40 type size D D CHS 75-6 35 40 Sectional view Size T nom. T max. T L T S RPM axial angular Weight J () () Nm Nm Nm Nm min ± mm degree kg kg m in-lbs in-lbs ft-lbs ft-lbs ± inches lbs lb in CHS-Series 7-6 3-6 75-6 35-6 505 83 750 6638 350 949 567 5 4956 594 3 0888 8 6 4 0 3 3 6 46 7 3 4 83 6 83 6 8400 6800 5400 40...6 0.06. 0.08.5.5.5.5.5.8.45 5.4 5..5 8. 8. 0.00049.67 0.0064 5.6 0.0099 33.86 0.0359 46.44 Size D ; D mm inches () Screw Size Shaft Diameter mm h7 Shaft Tolerance mm CH-Series 38 40 4 45 48 50.50.57.65.77.89.97.7.36 7-6 M6 3-6 M8 75-6 0 650 7 7 4868 5753 699 699 M0 35-6 4 500 0 650 750 0 00 450 4 445 5 5753 6638 7966 06 8 M0 inches 6 0 0.4 0.39 0 8 0.39 0.7 8 0.7.8 50.8.97 50 80.97 4.73 inches +0.0-0.0006 +0.0-0.0007 +0.0-0.0008 +0.0-0.000 +0.0-0.00 39

Mounting with Clamping Hub RING-flex CHD A, D, L F, S = main dimensions D, D D 3 S L 0 T nom. T max. T L T S RPM axial angular radial J = max. bore size = pilot bore = spacer length = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = tightening torque Clamping Hub = max. speed = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex CHD-3-6-35 Size A D D ; D D 3 L F S S L 0 max. mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches inches CHD-Series 7-6 3-6 75-6 35-6 7.78 88 3.46 6.5 4.59 4 5.53 47.85 6.5.46 8 3.9 94 3.7 5 0.98 35.38 45.77.36 0 0.39 4 5 5 9 9 0.75 39.5.56 45.77.7.36 7.5 0.3 8.8 0.35 0.4 0.4 0.47 Other sizes available upon request () Nominal (Tnom) and Maximum (Tmax) depend on shaft size. See Chart Below.36.76 00 3.94 00 3.94 00 3.94 80 3.5 40 5.5 40 5.5 40 5.5 00 3.94 80 7.09 80 7.09 40 5.5 39 5.47 6.3 0 8.7 0 8.66 79 7.05 6.69 50 9.84 0.4 9 8.6 7.48.4 0.8 9.06 Size D ; D mm inches () CH-Series 7-6 3-6 75-6 35-6 5 6 8 9 0 4 5 8 3 35 9 0.63 0.7 0.75 0.79 0.87 0.94 0.98.0.8.6.38 Nm 65 75 00 5 40 80 lb-in 575 664 797 885 08 39 505 593 Nm 0 50 80 0 50 0 350 3 lb-in 06 38 593 859 3 6 98 386 Nm 3 40 4 lb-in 386 377 4337 Nm 340 380 40 lb-in 09 3363 377 () Recommended shaft tolerance is h7 - See Chart on facing page 40

Example: RING-flex CHD-35-6-50--40 type size D D S CHD 35-6 50 40 Sectional view Size T nom. T max. T L T S RPM axial angular radial Weight J () () Nm Nm Nm Nm Nm ± mm degree mm kg kg m in-lbs in-lbs ft-lbs ft-lbs ft-lbs ± inches inches lbs lb in CHD-Series 7-6 3-6 75-6 35-6 505 83 750 6638 350 949 567 5 4956 594 3 0888 8 6 4 0 3 3 6 46 7 3 4 83 6 83 6 8400 6800 5400 40...6 0.06. 0.08.5.5.5.5 0.7 0.08 0.8 0.03. 7. 3. 7 0.9 0.035.7 0.067.7 0.067.4 5. 7. 0.087. 0.087.7 0.067.54 3.4 3.09 6.8 6. 4.4 0.9.7.66 3.7 3.5 6.9 6.85 5. 0.7 3.6.79 3.9 3.6 7. 7.4 5.7.6 4.6 3.48 7.7 0.00.6 0.003 8.6 0.009 3.7 0.0 7.5 0.00.77 0.003 8.75 0.00 33.69 0.0 74.45 0.00.97 0.003 9.05 0.00 35.77 0.03 77.36 0.003 9.64 0 0 Size D ; D mm inches () Screw Size Shaft Diameter mm h7 Shaft Tolerance mm CH-Series 38 40 4 45 48 50.50.57.65.77.89.97.7.36 7-6 M6 3-6 M8 75-6 0 650 7 7 4868 5753 699 699 M0 35-6 4 500 0 650 750 0 00 450 4 445 5 5753 6638 7966 06 8 M0 inches 6 0 0.4 0.39 0 8 0.39 0.7 8 0.7.8 50.8.97 50 80.97 4.73 inches +0.0-0.0006 +0.0-0.0007 +0.0-0.0008 +0.0-0.000 +0.0-0.00 4

Mounting with Clamping Hub RING-flex CHC A, D 3, L F, S = main dimensions D, D D 3 S L 0 T nom. T max. T L T S RPM axial angular radial J = max. bore size = pilot bore = spacer length = overall length = nominal torque capacity = max. torque capacity = tightening torque screws disc pack = tightening torque Clamping Hub = max. speed = axial misalignment = angular misalignment = radial misalignment = moment of inertia RING-flex CHC-3-6-35 Size A D D ; D D 3 L F S S L 0 max. mm mm mm mm mm mm mm mm inches inches inches inches inches inches inches inches CHC-Series 7-6 3-6 75-6 35-6 7.78 88 3.46 6.5 4.59 4 5.53 47.85 6.5.46 8 3.9 94 3.7 5 0.98 35.38 45.77.36 0 0.39 4 5 5 9 9 0.75 Other sizes available upon request () Nominal (Tnom) and Maximum (Tmax) depend on shaft size. See Chart Below 39.5.56 45.77.7.36 7.5 0.3 8.8 0.35 0.4 0.4 0.47 3..3 37.6.48 46.3.8.7 0. 4.34 7.6 5.0 56.3 6.5 75 6.89 Size D ; D mm inches () CH-Series 7-6 3-6 75-6 35-6 5 6 8 9 0 4 5 8 3 35 9 0.63 0.7 0.75 0.79 0.87 0.94 0.98.0.8.6.38 Nm 65 75 00 5 40 80 lb-in 575 664 797 885 08 39 505 593 Nm 0 50 80 0 50 0 350 3 lb-in 06 38 593 859 3 6 98 386 Nm 3 40 4 lb-in 386 377 4337 Nm 340 380 40 lb-in 09 3363 377 () Recommended shaft tolerance is h7 - See Chart on facing page 4

Example: RING-flex CHC-3-6-- type size D D CHC 3-6 Sectional view Size T nom. T max. T L T S RPM axial angular radial Weight J () () Nm Nm Nm Nm min ± mm degree mm kg kg m in-lbs in-lbs ft-lbs ft-lbs ± inches inches lbs lb in CHC-Series 7-6 3-6 75-6 35-6 505 83 750 6638 350 949 567 5 4956 594 3 0888 8 6 4 0 3 3 6 46 7 3 4 83 6 83 6 8400 6800 5400 40...6 0.06. 0.08.5.5.5.5 0.3 0.0 0.4 0.06 0.00 0.7 0.08.48 3.3.9 6.4 6. 3.7 9.7.4 0.00.43 0.00 7.45 0.008 7. 0.08 6.3 Size D ; D mm inches () Screw Size Shaft Diameter mm h7 Shaft Tolerance mm CH-Series 38 40 4 45 48 50.50.57.65.77.89.97.7.36 7-6 M6 3-6 M8 75-6 0 650 7 7 4868 5753 699 699 M0 35-6 4 500 0 650 750 0 00 450 4 445 5 5753 6638 7966 06 8 M0 inches 6 0 0.4 0.39 0 8 0.39 0.7 8 0.7.8 50.8.97 50 80.97 4.73 inches +0.0-0.0006 +0.0-0.0007 +0.0-0.0008 +0.0-0.000 +0.0-0.00 43

Technical Information Selection Guide The selection of the coupling size depends entirely on the torque to be transmitted and required shaft sizes. However, for the selection of the coupling type, application conditions (e.g., shaft misalignments, expansions and operating speeds) must be taken into consideration. For any special applications, please consult with us. When selecting a coupling size, make sure that under all operating conditions its torque capacity and speed range are not exceeded.. Calculate the driving torque (T AN ) to be transmitted from T AN (in-lbs) = 600 x HPRPM T AN (Nm) = x KWRPM. Determine required coupling Nominal Torque Capacity (T KN ) by finding the appropriate service factor (SM) in Table for your application. Multiply the torque calculated above (T AN ) by this service factor. T KN (in-lbs) = T AN x SM Find Tnom in coupling data sheets that is larger than the calculated T KN. This will be correct size of the coupling. NOTE: RING-flex Couplings can transmit higher torques for a short period of time without having to consider an additional service factor. Please consult coupling data sheets for Maximum Torque values. 3. Check if existing or predicted axial, angular and radial misalignments are within permissible values as shown in the catalog. If any one of the misalignments is close to the maximum allowable, the maximum misalignment in the other directions and the torque capacity will be effected. For this reason, we recommend selecting a coupling with more misalignment capacity than required. 4. Verify that the maximum hub bore and speed required. Do not exceed the maximum values for the coupling. NOTE: For a given hub size, larger shafts can be used with the RINGFEDER Shrink Disc rather than with traditional keyed connections. 5. If the RINGFEDER Shrink Disc or Locking Assembly connection is used, verify that the torque capacity of the locking device connection does not limit the couplings torque capacity. The locking device torque capacities for each shaft size can be found in the appropriate catalog. 6. Use Fig. and to verify that your coupling does or does not need to be dynamically balanced. Fig. : H-Series Fig. : G-Series Driving Equipment Load Driven Equipment Motor or Reciprocating Turbine Engine Uniform Centrifugal Pumps; Conveyors-Evenly Loaded;.0.5 Alternators; Fans and Blowers-Light Duty; Generators-Evenly Loaded; Mixers-Liquid Light Centrifugal Pumps; Generators-Pulsating Load;.5.0 Shock Grinders; Hydraulic Pumps; Machine Tools; Oscillating Pumps; Textile Machinery; Woodworking Machinery Medium Air Compressors-Multi-Cylinder; Cranes;.0.5 Shock Elevators; Hoists; Punch Presses; Reciprocating Pumps; Ship Drives Heavy Air Compressors-Single-Cylinder; Dredges;.5 3.0 Shock Drilling Rigs; Mining Machinery; Rubber Mixers Table : Service Factor (SM) The service factors listed are intended only as a general guide. For typical service factors used in various applications, refer to AGMA Standard Load Classification and Service Factors for Flexible Couplings (AGMA 54.0) 44

RING-flex Coupling Installation Instructions TOOLS REQUIRED: Torque Wrench and Sockets for Shrink Disc and Coupling Hex Bolts (see Tables 3 and 4) Open end wrench for Coupling Hex Bolts Straight Edge andor Dial Indicator Feeler Gauges It is recommended to disassemble the coupling for easier installation. Note Figures 8 and 9 for the correct arrangement of the bolts, washers, disc pack, and nuts. THESE INSTRUCTIONS ARE FOR THE STANDARD COUPLINGS WITH NORMAL RUNNING CONDITIONS. ALL COUPLINGS SHIPPED LOOSELY ASSEMBLED. BOLTS MUST BE TORQUED PRIOR TO USE. SEE TABLES AND 6. Fig. 3: Hub configuration for Shrink Disc connection Table : Shrink Disc Dimensions 407 Series d w T = Shaft Size = Torque capacity D s L = Outside Diameter = Width RfN d w T D s L 407 (inches) (lb-in) (inches) (inches) Size (mm) (Nm) (mm) (mm) Max Torque Capacity 4 36 44 50 6 68 75 80 00 0 5 40 65 75 0.75 0.83 505 3.97 0.9 9 50 50 3 0.83.0 668 375.36 0.98 6 88 3 5.0.5 3894 76.83.08 6 3.8 440 6 7 7.5.5.4 687 76 3.5.6 3.8 36 8 80.4.65 836 4 3.54.4 38 4 940 380 3.65.89 067 6639 3.94.36 4 48 880 00 34.5.89.65 6374 4 4.33.36 48 4 850 400 0 35.97.36 7 7880 4.53.36 50 000 350 5 34.5.7.56 7 349 5.43.50 65 500 3950 38 38.36.76 83 4073 5.7.50 0 40 45 38.56.95 4048 6476 6.0.75 65 75 4750 750 44.5.76 3.5 79656 6.69.95 80 60 00 49.5.95 3.35 6375 988 7.8.4 75 85 0 0800 85 57 3.35 3.74 97358 376 8.46.40 85 95 000 5000 5 6 3.74 4.3 33646 77899 9.06. 95 05 500 000 68.5 4.3 4.53 9476 4780 0.43.85 05 5 000 8000 65 7.5 4.53 4.9 7437 34578.4 3.9 5 5 00 300 8 4.9 5.3 3866 3988.8 3.9 5 35 0 45000 0 8 RfN d w T D s L 407 (inches) (lb-in) (inches) (inches) Size (mm) (Nm) (mm) (mm) Max Torque Capacity 85 95 00 0 40 80 0 340 350 3 380 3 400 40 440 5.3 5.7 437 548745.99 3.78 35 45 5000 00 3 96 5.5 6.0 57597 7334 3.78 3.78 40 65000 8500 350 96.56.95 4048 6476 3.78 3.78 50 74000 800 350 96 6. 6.69 84088 973579 4.57 4.49 95000 0000 3 4 6.69 7.48 086 3807 5.94 4.80 0000 500 405 7.48 8.7 48 84398 6.93 5.4 0 64000 05000 4 33.56.95 4048 6476 8. 5.79 0 00 000 4 47 9.06 9.65 433948 787977 9.09 6.0 45 75000 35000 485 9.45 0.4 7645 369 0.47 6.0 40 00 374000 50 9.84 0.63 34578 40733.44 6.65 50 3000 4000 5 69 0.63. 38 4453.83 6.89 85 44000 500000 580 75.0.6 4097883 4076 3.3 6.89 80 95 4600 5000 5 75.4.0 508358 583774 5.39 7.0 5600 658000 645 83.8. 849 635487 5.98 7.0 0 64000 78000 6 83.40.99 59998 6584936 6.77 7.0 35 3 6000 744000 680 83.99 3.78 6356 7965648 7.7 7.99 3 350 780000 0000 6 03.56.95 4048 6476 9.53 8.54 340 3 8000 0 750 7 If T is less than coupling torque, the max Coupling Torque Capacity = T 45

Technical Information RfN T A Socket (lb-ft) Size Size (Nm) (mm) CH T A Hex key Cplg (lb-ft) Size Size (Nm) (mm) RfN T A Socket 407 (lb-ft) Size Size (Nm) (mm) RfN T A Socket 407 (lb-ft) Size Size (Nm) (mm) 0 4 50 Table 3 6 3 8 3 8 4 4 5 5 5 6 6 7-6 3-6 75-6 35-6 Table 4 Attachment to Shaft Clamping Hub (CH Series). Inspect both driving and driven shafts making sure they are clean and free from burrs. Lightly oil shaft and hub bore. DO NOT USE MOLYKOTE OR SIMILAR LUBRICANTS.. Place hubs on shafts. Move first hub flush with the end of the hub. Tighten all Clamping Hub screws to torque recommended in Table 4. Use a Torque Wrench! 3. Follow instructions for axial alignment and then fit the second hub as explained in Step. 4. Repeat Step for second hub. Be sure shaft is completely under clamping portion of hub. Attachment to the Shaft Bore and Keyway. Inspect shaft and hub bores and keyways to make sure that they are clean and free of burrs. Lightly oiling the shaft will also make it easier to assemble.. Place first hub on one shaft and second hub on the second shaft. Slide them until shaft ends are visible. 3. Hubs are supplied standard with a slight clearance fit. Interference fits would be recommended for bores larger than 3. For more information, please contact Ringfeder. 4. Move hubs to be flush with end of the shaft. Hubs will last longest when the key is engaged for the full length of the hub. 5. Fit key into hub and turn set screw until top of key is contacted in the hub. 6. Follow instructions for axial alignment and then secure second hub to shaft as explained in Steps 4 and 5. Attachment to the Shaft Shrink Disc. Inspect both driving and driven shafts making sure they are clean and free from burrs. Lightly oil shaft and hub bore. DO NOT USE MOLYKOTE OR SIMILAR LUBRICANTS.. Place first hub with Shrink Disc on one shaft and the second hub on the other shaft. Slide them back so that both shaft ends are visible. 3. Move first hub to be flush with shaft end. Gradually tighten all Shrink Disc locking screws, in several passes, to specified tightening torque (T A ); see Table 5. Shrink Disc is not fully installed until one pass is completed without any bolts turning. 3 7 4 6 83 6 83 6 8 0 0 4 36 44 50 6 68 75 80 00 0 5 40 65 75 Table 5 3 4 3 4 9 9 9 9 9 9 44 44 74 00 74 00 85 5 85 5 8 8 0 0 0 0 0 0 3 3 3 3 7 7 9 9 4 4 85 95 00 0 40 80 0 340 350 3 380 3 400 40 440 85 5 85 5 85 5 85 5 36 49 36 49 36 49 36 49 36 49 36 49 36 49 36 49 84 84 84 84 84 Use Torque Wrench! For in-depth instructions, see appropriate catalog. 4. Follow instructions for axial alignment and then fit second hub to shaft as explained in Step 3 and Tables 4-5. 5. Proceed with locking second hub to the shaft by following the pertinent Attachment to the Shaft instructions. Attachment to Shaft Locking Assembly. Inspect both driving and driven shafts making sure they are clean and free from burrs. Lightly oil shaft and hub bore. DO NOT USE MOLYKOTE OR SIMILAR LUBRICANTS.. Place first hub with Locking Assembly on shaft. Move the hub to be flush with the end of the shaft. This will insure that the Locking Assembly is fully engaged. Torque Locking Assembly bolts to values shown in Table 3. Locking Assembly is fully installed only after one pass can be made without any bolts moving. Use a Torque Wrench! 4 4 4 4 36 36 36 36 36 46

3. Follow instructions for axial alignment and then fit the second hub to shaft as explained in Step. Again, be sure that the Locking Assembly is fully supported by the shaft. S Machinery Alignment The life of the coupling is directly affected by the alignment accuracy between the two coupling halves. Careful initial alignment will permit the coupling to operate at full capacity and allow for some future operational misalignments (i.e. equipment settling). For this reason, the maximum misalignment values given in the next tables are % of the maximum values for the coupling. Keeping all three directions of misalignment within these limits will increase the coupling life. Shrink Disc min. = S min. = S + x Fig. 3: Single Flexing Shrink Disc Axial Alignment. Bring equipment into the best visual alignment possible. Position the hubs axially so that the distance between shaft ends is within min. and max. dimensions S (Single Flexing) and S (Double Flexing) for standard couplings. See Figures 3 and 4. For nonstandard couplings, check corresponding coupling drawing.. Now locate first hub so that the shaft end is flush with the hub face and lock into place. Please see pertinent Attachment to the Shaft instructions. 3. Move second hub into position axially using the S (Single Flexing) or S (Double Flexing) S Shrink Disc Shrink Disc Fig. 4: Double Flexing min. = S min. = S + x S U Fig. 7 Fig. 5 Fig. 8: G series Hardware Arrangement only size 7-6 and 3-6 Fig. 6 Fig. 9: H series Hardware Arrangement 47

Technical Information Angular Alignment. With a dial indicator measure the angular misalignment by determining the parallelism of the coupling flange faces.. Dimension (U) as shown in Figure 5 should be measured in at least three points, equally spaced, to determine maximum value for (U). This must not exceed the max. allowable dimension stated in Table 6. 3. Adjust or shim equipment to bring indicator reading within max. allowable angular misalignment (U). Parallel (Radial) Alignment. Initial parallel alignment can be checked by using a straight-edge across the hub flanges (per Fig. 6) to measure the approx. distance (r) as shown in Table 6. A more precise method is using the dial indicator whereby the parallel off-set is measured in at least two places degrees apart while rotating one hub. This is shown in Fig. 7.. Adjust or shim equipment to bring indicator reading within max. allowable parallel misalignment (r) per Table 6. Installing Disc Pack and Sleeve. Once the hubs are aligned in the axial, angular and parallel directions, install the disc pack and sleeve. Figures 8 and 9 show the hardware orientation for each coupling type. PLEASE NOTE: It is very important on the Series G couplings to position the washers with the rounded face towards the disc pack.. At this point, the coupling bolts should be torqued to specified torque value (T); see Table 6. A torque wrench should be used to assure proper bolt tightening. PLEASE NOTE: With the Series G coupling, it is recommended to always turn the nut and hold the bolt head. 3. It is a good practice to check the coupling alignment one last time after completing the assembly. This can be achieved by measuring the disc pack gap in locations 80 degrees apart to find () lengths. The difference in these two measurements should not exceed (U); see Table 6. This completes the coupling installation. S S +- U r T Hex or (inches) (inches) (inches) (inches) (inches) (LB-FT) Socket (mm) (mm) (mm) (mm) (mm) (Nm) Size Series G Axial Alignment Angular Paralell Bolt Information 0-4 0.7 6.9.5 57 0. 0.0 0.4 0.0 0. 8 76 0-4 0.3 8..75 0.03 0.8 0.0 0.0 0.3 7 3-4 0.34 8.6.59 66 0.03 0.8 0.0 0.0 0.3 7 3 40-4 0.48. 3.3 84.0 0.03 0.7 0.0 0.4 40 54 58 50-4 0.7 3.64 9.3 0.03 0.7 0.0 0.4 58 79 34-4 6 4. 3.83 97 0.06.5 0.03 0.9 0.0 58 79 34-4 0. 5 4.59 7 0.07.8.0 0.0 5 56 56 80-4 0.8 5.0 0.08.0. 0.0 5 56 56 S S +- U r T Hex or (inches) (inches) (inches) (inches) (inches) (LB-FT) Socket (mm) (mm) (mm) (mm) (mm) (Nm) Size Series H Axial Alignment Angular Paralell Bolt Information 7-6 3-6 75-6 35-6 40-6 400-6 650-6 00-8 -8 0. 7.6.36 0.0 0.3 0.0 0.3 0.0 0.3 6 8 4 mm 0.35 8.80.76 0.0 0.3 0.0 0.3 0.0 0.3 0 4 5 mm 0.4 0.4 3.94 00 0.0 0.3 0.0 0.0 0.3 3 3 3 mm 0.47 3.94 00 0.0 0.3 0.0 0.6 0.0 0.3 46 6 6 mm 3.0 5.5 40 0.0 0.03 0.7 0.0 8 0 8 mm 9 5.0 5.5 40 0.0 0.03 0.8 0.0 33 80 4 mm 0.8 0.8 7.09 80 0.0 0.9 0.0 07 80 4 mm.0 9.84 0.0 0.03 0.0 4 8.0 50 0.3 0.8 5 mm.7 9.83 0.0 0.0 739 3. 50 0.9 000 36 mm Table 6: Alignment Values and Coupling Bolt Information CAUTION: All rotating equipment is potentially dangerous and must be properly guarded. It is the user s responsibility to check for all applicable safety codes and provide suitable guards and protection. Bore mm inches 6 0 0,4 0,39 0 8 0,39 0,7 8 0,7,8 50,8,97 50 80,97 3,5 80 0 3,5 4,73 Table 7: Standard Bore Tolerances H7 Tolerance mm inches +0.0006-0.0 +0.0007-0.0 +0.0008-0.0 +0.000-0.0 +0.00-0.0 +0.004-0.0 48

Technical Information Misalignment and Misalignment Factor f The maximum misalignments stated in the tables only apply if they occur individually. If there is a combination of misalignments, the lar misalignment angular and offset misalignment radial of the shafts, according to the following formula: permitted individual misalignments are reduced accordingly. The combined total angular misalignment D tot is a function of the angu- tot [ ] = angular +arctan radial (S - S ) f.8.6.4. Temperature Factor f 3 RING-flex couplings are temperature-resistant up to 40 C4 F. For higher temperatures the temperature factor f 3 must be taken into account (see diagram 3). Non-Standard Spacers Many RING-flex coupling applications require special spacer lengths and dimensions. At Ringfeder, we can offer spacer lengths up to m long. Higher Speed or Special Couplings Occasionally a coupling needs to meet certain industrial standards for safety or will be operated at high speeds. Ringfeder has the capability of supplying such solutions. GD coupling with special spacer for printing press application HD coupling that meets API 49

Fax Inquiry On this page you can explain the application of a disc coupling and we will propose our solution. Please send this page to: USA and Mexico: MARYLAND METRICS FAXES: (40)358-34 (800)87-939. Application Planned use of the coupling (machine, machine group or plant):. Type of Attachment (please check) Key Shrink Disc Locking Assembly Clamping Hub Other (please enclose drawing) 3. Dimensions Length (inch) Bore size D (inch) Ø (inch) Bore size D (inch) 4. Shaft Displacement 5. Drive axial (inch) radial (inch) angular (degree) Drive power P = kw Nominal torque of the drive Mt nom = Nm Input speed n = min Peak torque of the drive Mt maxx = Nm 6. Mass Moment of Inertia On the drive side JA = Nm On the driven side J L = Nm 7. Environmental Influences Temperature in the area of the coupling Temp = C Special materials (e.g. stainless steel) Are there any impacts on the load side? no slight medium severe other, special influences 8. Expected Quantities Production Project Repair Number of itemsp.a. 9. Target Price $each Please send your offer to: Company Attention Address Phone E-mail Fax 50

Delivery Program Locking Devices Locking Assemblies Locking Elements Shrink Discs Smart-Lock Damping Technology Friction Springs DEFORM plus DEFORM plus R Fluid Elastomeric Damper Special Solutions Shaft Couplings Locking Assemblies Flange Couplings Couplings Magnetic Couplings Metal Bellows Couplings Servo-Insert Couplings RING-flex torsionally rigid Disc Couplings Safety Couplings Line Shafts 5

RINGFEDER POWER TRANSMISSION RINGFEDER POWER TRANSMISSION GMBH Werner-Heisenberg-Straße 8, D-6483 Groß-Umstadt, Germany Phone: +49 (0) 78 9385-0 Fax: +49 (0) 78 9385-00 RINGFEDER Products are available from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA phones: (40)358-3 (800)638-8 faxes: (40)358-34 (800)87-939 email: sales@mdmetric.com web: http:mdmetric.com RFQ form: http:mdmetric.comrfq.htm