Packings STYLE 50 Carbon yarn packing heavily impregnated with PTFE dispersion. For severe services in pumps or valves handling chemicals, solvents and acids. An ideal packing for paper mill applications. ft./lb. 72 43 25 17 12 9 7.5 5.5 4.6 3.2 2.1 1.8 lbs./box 1 or 2 1 or 2 1 or 2 2 2 or 5 5 5 5 5 5 or 10 10 10 Temperature: To 600 F (315 C) ph: 014 Speed: 3000 FPM Pressure: PumpsTo 500 PSI (35 bar) 50 90 154 154FDA 154S 156 PFTE 160 165 165K 165LA 170 182 STYLE 90 Carbon yarn packing impregnated with graphite dispersion. For severe services in pump and valve applications, including superheated steam, acids, alkalis, etc. ft./lb. 160 58 39 21 15.3 11.7 8.8 7.8 6 4.1 3 2.2 lbs./box 1 or 2 1 or 2 1 or 2 2 2 or 5 5 5 5 5 5 or 10 10 10 Temperature: To 850 F atmosphere (455 C) Temperature: To 1200 F steam (650 C) ph: 014 Speed: 4000 FPM Pressure: PumpsTo 500 PSI (35 bar) Pressure: ValvesTo 2500 PSI (170 bar) http://www.chemstarpacking.com/body/cspak.htm (1 of 11)10/17/2008 4:27:47 AM
525T 528 531 1100CR 1100 I 1100TCP 1152 1152K 1162 IB 1190 1398 1414 1416 1416 IB 1430 2000 3165 4100 4200 STYLE 154 PTFE packing with PTFE dispersion. A dense firm packing used in valve and slow speed pump applications. Excellent chemical resistance. ft./lb. 74 32 20.6 13.5 9.5 7 5.5 4.1 3.3 2.5 2 1.6 ph: 014 Speed: 1000 FPM Pressure: PumpsTo 300 PSI (20 bar) Pressure: ValvesTo 2000 PSI (140 bar) STYLE 154 FDA Food Grade FDA PTFE filament, food grade, interlock braid with breakin lube. ft./lb. 72 31 19.4 12.5 9 7 5.1 4.1 3.3 2.3 1.7 1.2 ph: 014 Speed: 1500 FPM Pressure: PumpsTo 300 PSI (20 bar) Pressure: ValvesTo 2000 PSI (140 bar) STYLE 154S PTFE packing treated with an inert lubricant. A soft and resilient packing for chemical pump and valve applications. ft./lb. 72 31 19.4 12.5 9 7 5.1 4.1 3.3 2.3 1.7 1.2 ph: 014 Speed: 1500 FPM *Food service packing use Style 154FDA Braided tape Style 156 http://www.chemstarpacking.com/body/cspak.htm (2 of 11)10/17/2008 4:27:47 AM
STYLE 156 PFTE Braided Tape Use with glass, FRP or metal flanges and applications where a highly compressible, chemically resistant gasket is required. In. 1/2" x 1/8" 1" x 1/8" 3/4" x 1/4" 1" x 1/4" 1 1/4" x 1/4" 1 1/2" x 1/4" 2" x 1/4" ft./lb. 14.5 7.2 8.0 4.7 3.7 3.4 2.3 ph: 014 Pressure: PumpsTo 300 PSI (20 bar) Construction: Flat Braid Tape STYLE 160 Graphite filament packing impregnated with a graphite dispersion. For severe service applications where leakage must be held to a minimum. Excellent chemical resistance. ft./lb. 210 68 45 24 17 12.6 11 9.6 7.5 5.3 3.7 2.5 lbs./box 1 or 2 1 or 2 1 or 2 2 2 or 5 5 5 5 5 5 or 10 10 10 Temperature: To 850 F (455 C) Atmosphere Temperature: To 1200 F (650 C) Steam ph: 014 Speed: 4000 FPM Pressure: PumpsTo 500 PSI (35 bar) Pressure: ValvesTo 2500 PSI (170 bar) STYLE 165 Graphite filled PTFE fiber packing that improves thermal conductivity and will not harden. 100% GFO. ft./lb. 69 36 21 14 10 7 5.7 4.5 3.5 2.5 1.9 1.5 Temperature: To 550 F (285 C) ph: 014 Speed: 4300 FPM Pressure: PumpsTo 300 PSI (20 bar) *Trademark of W.L. Gore & Associates http://www.chemstarpacking.com/body/cspak.htm (3 of 11)10/17/2008 4:27:47 AM
STYLE 165K Unique packaging combining PTFE graphite with aramid corners. Aramid corners prevent rolls and extrusion. Excellenct service packing in servere pump applications. Widely used in paper mills ft./lb. N/A N/A 22 13.1 9.5 6.6 5.7 4.2 3.3 2.6 1.8 1.5 lbs./box N/A N/A 2 2 2 or 5 5 5 5 5 10 10 10 Temperature: To 550 F (285 C) ph: 212 Speed:2500 FPM STYLE 165LA Graphite filled PTFE fiber with excellent thermal conductivity and will not harden. An economical substitute for Style 165. ft./lb. 69 36 21 14 10 7 5.7 4.5 3.5 2.5 1.9 1.5 Temperature: To 550 F (285 C) ph: 014 Speed:4300 FPM Pressure: PumpsTo 300 PSI (20 bar) STYLE 170 Aramid fiber packing with an inert lubricant. Extremely durable, highly abrasive resistant packing. Ideal for slurry service. ft./lb. 78 37 22 16.5 11.4 8 6 4.9 3.6 2.6 2.3 1.6 ph: 311 Speed: 1900 FPM Pressure: 500 PSI (35 bar) http://www.chemstarpacking.com/body/cspak.htm (4 of 11)10/17/2008 4:27:47 AM
STYLE 182 Spun aramid fiber impregnated with PTFE dispersion and breakin lubricant. Idel for valves and pumps in abrasive service.. ft./lb. 75 35 20 18 10 8 6 5 3.8 2.4 2.1 1.7 ph: 212 Speed: 2250 FPM Pressure: 500 PSI (35 bar) STYLE 525T Premier marine service packing made with flax fibers and lubricated with PTFE dispersion. It has low friction and high tensile strength. Excellent for water service and paper mill applications. ft./lb. 120 50 30 20 15 10 8.6 6.6 5 3.6 2.7 2.1 lbs./box 2 2 5 5 5 or 10 5 or 10 5 or 10 5 or 10 10 10 10 10 Temperature: To 250 F (120 C) ph: 49 Speed: 1500 FPM Pressure: To 200 PSI (15 bar) Construction: Square Braid STYLE 528 Flax fiber packing lubricated with tallow and wax. Used for brine, cold water and oil service. Ideal for marine applications. ft./lb. 139 59 28 21 14.8 10.7 8.6 6.5 5.1 3.5 2.6 2.3 lbs./box 2 2 5 5 5 or 10 5 or 10 5 or 10 5 or 10 10 10 10 10 Temperature: To 200 F (105 C) ph: 59 Speed: 1200 FPM Pressure: To 150 PSI (10 bar) Construction: Square Plaited http://www.chemstarpacking.com/body/cspak.htm (5 of 11)10/17/2008 4:27:47 AM
STYLE 531 Flax fiber packing, treated with a petroleumbased lubricant and surface graphited. ft./lb. 118 58 33 22 15 11 9 7.4 5.7 3.8 2.8 2.3 lbs./box 2 2 5 5 5 or 10 5 or 10 5 or 10 5 or 10 10 10 10 10 Temperature: To 220 F (105 C) ph: 59 Speed: 1200 FPM Pressure: To 150 PSI (10 bar) Construction: Square Braid STYLE 1100CR Braided from a combination of expanded flexible graphite (1100TCP) and high strength carbon fibers (90). Carbon fibers are braided into the corners to provide antiextrusion and better abrasion resistance in tough applicaitons. Can give virtually leak free performance. 1100CR was independantly fire tested to API 589 at API 607 temperatures and pressures.. ft./lb. N/A N/A 33 21 14.8 10.5 8 7.2 5.7 3.8 3.2 2.5 lbs./box N/A N/A 1 or 2 2 2 or 5 5 5 5 5 5 4 3 Temperature: To 1250 F (650 C) Steam Temperature: To 1050 F (565 C) Atmosphere ph: 014 except strong oxidizers Speed: 4000 FPM Pressure: 3000 PSI (200 bar) STYLE 1100 I Braided from a combination of expanded flexible graphite and inconel wire. 110 I retains dimensional stability in high temperature, high pressure environments, and can meet most VOC emission control regulations. 1100 I was independantly fire tested to API 589 at API 607 temperatures and pressures. ft./lb. 110 50 30 20 13 10 7 6.4 5 3.3 2.6 2 lbs./box 1 1 1 or 2 2 2 or 5 5 5 5 5 10 10 10 Temperature: To 1200 F (650 C) Steam Temperature: To 850 F (455 C) Atmosphere ph: 014 except strong oxidizers Pressure: 3000 PSI (200 bar) *Valves Only http://www.chemstarpacking.com/body/cspak.htm (6 of 11)10/17/2008 4:27:47 AM
STYLE 1100TCP Braided from pure expanded graphite. It is resilient, selflubricating, chemically inert and thermally conductive. 1100TCP can be used in both pumps and valves in a wide range of service conditions. ft./lb. 103 48 33 20 12 10 7 6 5 3.3 2.5 2 lbs./box N/A N/A 1 or 2 2 2 or 5 5 5 5 5 5 4 3 Temperature: To 1200 F (650 C) Steam Temperature: To 850 F (455 C) Atmosphere ph: 014 except strong oxidizers Speed: 4000 FPM Pressure: To 3000 PSI (200 bar) *May require antiextrusion rings *Does not contain cotton carrier STYLE 1152 Special syntex fiber, with each strand impregnated with PTFE dispersion both prior to and after braiding. Finished packing also has a breakin lubricant. An asbestos replacement packing for general service applications. Good chemical resistance. ft./lb. 80 48 25 16.6 12 8.5 6.4 5.7 3.6 2.6 2.6 1.7 lbs./box 1 1 2 or 5 2 or 5 2 or 5 5 5 5 5 10 10 10 ph: 012 Speed: 2200 FPM Pressure: To 500 PSI (35 bar) http://www.chemstarpacking.com/body/cspak.htm (7 of 11)10/17/2008 4:27:47 AM
STYLE 1152K Unique packing combining 1152 and 170 fibers. Aramid corners prevent roll and extrusion. Well suited for abrasive applications and end rings with other packings. ft./lb. N/A N/A 25 17 11.7 8.8 6.8 5.7 4.2 3.2 2.1 1.6 lbs./box N/A N/A 2 or 5 2 or 5 2 or 5 5 5 5 5 10 10 10 ph: 312 Speed: 2200 FPM Pressure: To500 PSI (35 bar) STYLE 1162 IB Syntex fiber thoroughly impregnated with PTFE, a breakin lubricant is added for startup. An economical PTFE general service packing. Interlock braid. ft./lb. 80 42 20 13 8.8 7.6 5.7 5 4.2 2.5 2.1 1.5 lbs./box 1 1 2 or 5 2 or 5 2 or 5 5 5 5 5 10 10 10 ph: 210 Speed: 2000 FPM STYLE 1190 Special Kynol fibers treated with PTFE and breakin lubricant. This is a noncontaminating packing for use in paper mills in almost all pump and valve applications. ft./lb. 80 50 26 19 13 10 7.4 6 4.6 3.2 2.5 1.9 lbs./box 1 1 2 2 or 5 2 or 5 5 5 5 5 10 10 10 ph: 013 Speed: 1500 FPM Pressure: To 500 PSI (35 bar) http://www.chemstarpacking.com/body/cspak.htm (8 of 11)10/17/2008 4:27:47 AM
STYLE 1398 Syntex fiber packing thoroughly impregnated with a high temperature lubricant. Finished packing is surface graphited. An asbestos replacement packing for general service use on pumps and valves. ft./lb. 128 56 31 21 16 11 8.6 6.7 5.8 4 3 2.1 lbs./box 2 2 2 2 or 5 2 or 5 5 5 5 5 or 10 10 10 10 Temperature: To 500 F (265 C) ph: 410 Speed: 1500 FPM Available with Moly Lubricant STYLE 1398 MOLY STYLE 1414 High temperature carbon yarn with inconel wire braided over a resilient core thoroughly impregnated with graphite and corrosion inhibitor. ft./lb. 76 39 25 12.6 9.4 7.1 6 4.4 3.8 2.6 2.1 1.5 lbs./box 1 1 2 or 5 2 or 5 2 or 5 5 5 5 5 10 10 10 Temperature: To 1200 F Steam (650 C) ph: 112 Pressure: To 2500 PSI (17 bar) Construction: Braid over core *Valves Only STYLE 1416 Texturized fiberglass fiber packing. It is braided dry with no lubricant. Packing will not swell, shrink and is completely incombustible. Used for sealing over doors. Excellent chemical resistance. ft./lb. N/A N/A 28 18 12.5 10 7.7 6.2 5.4 3.8 2.6 2.1 lbs./box N/A N/A 2 or 5 2 or 5 5 5 5 or 10 5 or 10 10 10 10 10 Temperature: To 1000 F (535 C) ph: 211 Construction: Square Plaited http://www.chemstarpacking.com/body/cspak.htm (9 of 11)10/17/2008 4:27:47 AM
STYLE 1416 IB Interlock Braided Texturized fiberglass fiber packing. It is braided dry with no lubricant. Packing will not swell, shrink and is completely incombustible. Used for sealing over doors. Excellent chemical resistance. Available from 1/2" to 1". ft./lb. N/A N/A N/A N/A N/A N/A 8 6 4.2 3.3 2.5 2 lbs./box N/A N/A N/A N/A N/A N/A 5 or 10 5 or 10 10 10 10 10 Temperature: To 1000 F (535 C) ph: 211 STYLE 1430 Syntex fiber packing treated with a high temperature lubricant and graphited. Soft and pliable for general service on pumps and valves. ft./lb. 128 56 34 22 16 12.5 9 6 5.5 4 2.6 2.2 lbs./box 2 2 2 or 5 2 or 5 5 5 5 5 or 10 5 or 10 10 10 10 ph: 410 Speed: 1500 FPM Construction: Square Plaited Available with Moly Lubricant STYLE 1430 MOLY STYLE 2000 Special metaaramid fiber with PTFE and breakin lubricant. Very conformable and abrasive resistant. Highly resistant to degradation and chemical attack. For use in agitators, stock pumps, mixers, etc.. ft./lb. 90 50 26 18 10 8 6.2 5.1 4.1 3.2 2 1.6 ph: 410 Speed: 1500 FPM http://www.chemstarpacking.com/body/cspak.htm (10 of 11)10/17/2008 4:27:47 AM
STYLE 3165 Special blend of PTFE and graphite fibers plus a high temperature lubricant. An economical substitute for style 165. Good chemical and abrasion resistant packing. ft./lb. 63 42 20 12.5 9.3 6.8 5.4 4 3.2 2.4 1.7 1.3 Temperature: To 550 F (285 C) ph: 014 Speed:4500 FPM Pressure: PumpsTo 300 PSI (20 bar) STYLE 4100 Valve Packing Extruded round valve packing made of 100% expanded virgin PTFE. FDA suitable (FDA 21 CRR 177.1550) ft./box 3/32" x 50' 5/32" x 25' 7/32" x 15' 9/32" x 9' Temperature: To 450 F to 600 ph: 014 STYLE 4200 Joint Sealant Chemcord 100% expanded virgin PTFE joint sealant. Maximum performance gasket material. FDA approved. ft./box 1/8"x100' 3/16"x75' 1/4"x50' 3/8"x25' 1/2"x15' 5/8"x15' 3/4"x15' 1"x15' Temperature: To 600 F (315 C) ph: 014 Pressure: PumpsTo 3000 PSI (200 bar) (Jumbo Spools Available) Home About Us High Performance Packings Comparison Chart and Braid Construction Gasket Materials Injectable Packing Sealant Contact Us ChemStar 3511 Century Blvd. Suite 103 Lakeland, FL 33811 USA (863) 4255581 FAX (863) 4255762 Toll Free (800) 3975581 http://www.chemstarpacking.com/body/cspak.htm (11 of 11)10/17/2008 4:27:47 AM