Air Distribution SWIRL DIFFUSERS DW SERIES SERIES

Similar documents
C O L M A N. Air Distribution SWIRL DIFFUSERS DWT SERIES DWT SERIES

C O L M A N. Air Distribution JET DIFFUSERS DCJ SERIES DCJ SERIES

C O L M A N. Air Distribution CIRCULAR DIFFUSERS LRS SERIES LRS SERIES

C O L M A N. Air Distribution PERFORATED FACE DIFFUSERS P SERIES SERIES

C O L M A N. Air Distribution FLOOR SWIRL DIFFUSERS B SERIES SERIES

C O L M A N. Air Distribution LINEAR BAR GRILLES T SERIES SERIES

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES

C O L M A N. Air Distribution TRANSFER GRILLES G SERIES SERIES

C O L M A N. Air Distribution NOZZLE DIFFUSERS N SERIES SERIES

LINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise

HIGH CAPACITY LINEAR SLOT DUFFUSERS

SDV Vane Swirl Diffusers

LINEAR SLOT DUFFUSERS

EYELASH DIFFUSERS E SERIES. Quality and efficiency without compromise

LINEAR SLOT DIFFUSERS

Perforated Face Ceiling Diffusers

IMP Klima. Swirl diffusers. Variable swirl diffusers

Slot diffusers, Round duct diffusers. IMP Klima

Linear Slot Diffusers Model Slot 20 and Model Slot 25

DRUM SLOT DIFFUSER TYPE: RT350

Floor Swirls Models BZD and SZD

Adjustable Curved Vane Diffusers. Vanes are parallel to the width dimension Vanes are parallel to the height dimension

ADJUSTABLE SLOT DIFFUSER TYPE: SE800

Small Format Circular Diffusers. Small format circular diffuse

Linear Floor Grilles Models FG, F20, F25 and FRO

FlowBar High Capacity Slot Diffuser

Ceiling swirl diffusers

Ceiling swirl diffusers with perforated face plate

Incorporating V2.0. Product spec >>> > Series DD - Double deflection grilles

DKR - Multi-nozzle Ceiling Diffuser. Halton DKR. Multi-nozzle Ceiling Diffuser

Aircell Polymer Range

Ventilation grilles for installation into walls, sills or rectangular

DKS - Multi-nozzle Ceiling Diffuser. Halton DKS. Multi-nozzle Ceiling Diffuser

Multicore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS

Catalogue. FlowBar. High Capacity Slot Diffuser.

Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:

Wall and Ceiling Grille

Swirl Diffuser Model DQF

Airline Linear Grilles

SERIES GB. Adjustable Slot Swirl Diffusers

Series KSG 1. Security Grilles INDEX

Incorporating V2.0. Product spec >>> > Series NV - Non vision grilles

Incorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles

Ceiling swirl diffusers with perforated face plate

IMP Klima. Swirl diffusers. Variable swirl diffusers

Type DCS FOR HORIZONTAL SWIRLING SUPPLY AIR DISCHARGE CREATING HIGH INDUCTION LEVELS, WITH FIXED AIR CONTROL BLADES

Incorporating V2.0. Product spec >>> > Series DJ - Drum jet diffusers

Linear Slot Diffusers Model Slot 20 & Model Slot 25

SUPPLY AND RETURN AIR GRILLES TYPE: AS/GS120 AS/GS130

ceiling swirl diffuser Model DQJA / DQJR

Ceiling swirl diffusers

DFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser

ceiling swirl diffuser DQJ

Ceiling diffuser 4DF

Ceiling swirl diffusers

Air Handling Reference Catalogue

SERIES GP. Security Grilles

SERIES GSF. Fixed Swirl Diffusers (Patented)

TBV - Terminal Unit. Halton TBV. Terminal Unit

Type VDL FOR HIGH ROOMS, WITH ADJUSTABLE AIR CONTROL BLADES. Homepage > Products > Air Diffusers > Swirl diffusers > Type VDL

THB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser

DFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser

TRB - Conical Ceiling Diffuser. Halton TRB. Conical Ceiling Diffuser

Swirl Diffuser DHV Contents Description...3 Models and dimensions...4 Technical data...8

SERIES GSL. Linear Slot Diffuser

Ventilation grilles for installation into walls, sills or rectangular

Ventilation grilles for installation into walls, sills or rectangular

Ceiling Swirl Diffuser DQJ

Accessories. Front vane panel Coupling sleeve with gasket Galvanised steel Gasket of rubber compound

LINEAR BAR GRILLES. GRILLES-Linear Bar

Anti-Ligature Grille. There s a much bigger picture to be found at Ruskin Air Management. Model AL/35 Model AL/24. range available.

THL - Conical Ceiling Diffuser. Halton THL. Conical Ceiling Diffuser

ADJUSTABLE PERFORATED AIR SUPPLY DIFFUSER TYPE: DC560S

Ceiling diffuser 4DE

SERIES HSL. High Capacity Linear

TCM - Conical Ceiling Diffuser. Halton TCM. Conical Ceiling Diffuser

SERIES 701, , 151, 152 AV 1201/1401

DCS - Ceiling Diffuser. Halton DCS. Ceiling Diffuser

2/6.1/EN/1. High Induction. Variable / Constant Volume Swirl Diffuser Types HIVV HICV

SERIES GP GILBERTS. Security Grilles. Features

Ceiling induction diffuser DISA-300

SRY. Ceiling mounted linear disc diffuser for supply air QUICK FACTS

Accessories. Balancing plenum PRI For balancing & equalising the airflow and attenuating the duct noise

SERIES PG. Perforated Face

Ceiling diffusers. Type VDR. For large temperature differences in heating mode, high penetration of air, with adjustable air control blades

June 2009 Quick Selection Guide

LAQ Return air diffuser

Ventilation grilles for installation into walls, sills or rectangular

INDEX. Chapter3. air master. Linear Bar Grilles

K1-2. Table of Contents LINEAR BAR GRILLES 1500, 1500MC, 1800, 1800MC

SERIES GZL. High Induction Linear Diffuser (Patented)

Air Transfer Grilles. NS Core only grille for beading in place. DV Core only door ventilator for bead fixing. NSNL Core only No-Sight

Ceiling induction diffuser DISA-601

Round duct diffuser DBB-RR

SLOT DIFFUSERS, ROUND DUCT DIFFUSERS

Nozzle Jet Diffuser Model DSA

GDD - Supply Grille. Halton GDD. Supply Grille

Ceiling Slot Diffuser Model DSX

Total comfort control

Transcription:

COLMAN Air Distribution E N G I N E E R E D SWIRL DIFFUSERS DW SERIES DW SERIES A I R P R O D U C T S

SWIRL DIFFUSERS DW SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application The DW type swirl diffuser has been designed to supply cooled or warmed air to a wide range of commercial applications. A high level of induction is achieved due to the pitch of the radial outlet pattern combined with a high relative free area. Temperature and velocity differences between supplied and room air are therefore quickly reduced. The high relative free area also makes this diffuser type well suited to extract applications. Description A circular array of deflection blades are pressed into a square steel panel. Nominal size is determined by the diameter of the radial outlet pattern and the overall diffuser panel size. Two types of swirl pattern are available a fixed vane type and a curved vane. The DWS is available in overall panel sizes of 394, 494 and 594mm overall. The DWV is available only in a standard 594mm 594mm panel. A circular version is also available for both the DWS and DWV to match the respective nominal petal sizes. The DW type swirl diffuser can be supplied with matching side or top entry plenum boxes, with or without monoblade volume control dampers. Fixing The DW type swirl diffuser is suitable for mounting at heights of between 2.5m and 4m from floor level. The diffuser plate is fastened to the plenum by a central fixing screw. The side or top entry plenum is to be fixed via support rods or wires to suitable structural support. Finish The diffuser is supplied powder coated white (RAL 9010) matt as standard. Gloss finish is available at no extra cost. Other RAL colours are available on request. Alternative Ceiling Fixings Style DWST / DWVT T Bar Style DWSR Recessed Style DWSX Threadline 8mm Drop Face Style DWSF Threadline 16mm Drop Face

Diffuser Dimensions DWS Nominal Size Diameter of Calculated free A Plenum size B C code radial outlet area (m3) Overall panel size (L & W (mm) Side entry plenum Top entry plenum pattern (mm) (mm) height (mm) height (mm)_ 3540 394 x 394 3550 350 0.0320 494 x 494 355 305 225 3560 594 x 594 5060 500 0.0732 594 x 594 555 420 DWV Nominal Size Diameter of Calculated free A Plenum size B C code radial outlet area (m3) Overall panel size (L & W (mm) Side entry plenum Top entry plenum pattern (mm) (mm) height (mm) height (mm)_ 4460 440 0.064 455 305 594 x 594 5360 530 0.078 535 420 225 Options and Order Codes Diffuser codes 1. SERIES 2. STYLE 3. CORE 4. ACCESSORIES 5. ARRANGEMENT 6. FIXING 7. FINISH D W Swirl S Fixed Vane pattern V Curved Vane pattern T T-bar mounted C Circular X Threadline mounting 8mm drop face F Threadline mounting 16mm drop face R Recessed mounting O Fixed Blade O None C Central screw fixing F RAL 9010 matt white E RAL 9010 gloss white Plenum codes 1. SERIES 2. LINING 3. INSTALLATION METHOD 4. ACCESSORIES 5. ARRANGEMENT 6. SPIGOT TYPE 7. SPIGOT DIAMETER D L Lined N Unlined W For DWS V For DWV 0 None A Cord operated monoblade damper B Cord operated monoblade damper (matt black) P Internally painted (matt black) S E Supply Extract R Round Side entry T Round Top entry B 125 C 150 D 200 E 250 F 300 N 315 P 280 R 225 T 175

Example of Order Codes DWSTOCF 5060 DNWASRN 5060 Supply diffuser complete with side entry plenum. Monoblade damper in 315 spigot. Overall diffuser size 594 594 square with 500mm diameter radial outlet. Diffuser panel powder coated white (RAL9010) gloss. DWS Performance data Nominal Volume Volume Face Velocity Pressure Drop Throw to 0.5 m/s Noise Rating size code (l/s) (m 3 /s) (m/s) (Pa) Velocity (m) (NR) 60 0.06 2.1 4 0.9 14 70 0.07 2.5 5 1.0 17 80 0.08 2.9 7 1.2 22 90 0.09 3.2 8 1.4 24 3540 100 0.10 3.5 10 1.5 28 3550 110 0.11 4.0 13 1.7 30 3560 120 0.12 4.4 15 1.8 32 125 0.125 4.5 15 1.9 34 130 0.13 4.6 16 2.0 35 135 0.135 4.8 17 2.1 36 140 0.14 5.0 19 2.2 38 130 0.13 2.3 5 0.9 15 140 0.14 2.5 6 1.0 17 150 0.15 2.7 7 1.1 18 160 0.16 2.9 8 1.2 20 170 0.17 3.0 9 1.3 23 180 0.18 3.2 10 1.4 26 190 0.19 3.4 11 1.5 28 200 0.20 3.6 12 1.6 30 5060 210 0.21 3.8 13 1.7 32 220 0.22 3.9 14 1.8 33 230 0.23 4.1 15 1.8 34 240 0.24 4.3 17 1.9 35 250 0.25 4.5 18 2.0 36 260 0.26 4.6 19 2.1 37 270 0.27 4.8 21 2.2 39 280 0.28 5.0 23 2.3 40 290 0.29 5.2 24 2.4 42 300 0.30 5.4 26 2.5 43

DWV Performance data Nominal Volume Volume Pressure Drop Throw to 0.5 m/s Noise Rating size code (l/s) (m 3 /s) (Pa) Velocity (m) (NR) 50 0.05 5 1 <20 4460 75 0.075 8 1.2 20 100 0.1 15 1.7 27 150 0.15 38 2.5 47 75 0.075 6 0.9 <20 5360 100 0.1 9 1.2 21 150 0.15 17 1.6 30 200 0.2 32 2.1 37 Performance figures are for diffuser only and assume supply air temperature -10 to +10 degrees C relative to room temperature. Pressure drop shown is static pressure drop for diffuser only and does not allow for effect of plenum. Throw value is measured horizontally to terminal velocity of 0.5 m/s and assumes ceiling effect. Multiply throw value by 0.7 for installation without ceiling effect. All NR ratings based on room absorption of 8 db, dampers fully open.

PRODUCT R ANGES GRILLES Linear Bar Ceiling Sidewall Floor Computer Floor Cill Single & Double Deflection Egg Crate Hinged Core Door Transfer Security and Prison Supply and Extract Valves DIFFUSERS Linear Slot Louvre Face Sidewall Perforated Face Circular Swirl Ceiling Sidewall Fixed & Adjustable Jet Flow / Nozzle Repus Displacement Ventilation LOUVRES External Circular Door Screens Penthouse Sand Louvres Roof Louvres BESPOKE SERVICE We offer a bespoke design service where standard products do not fit the requirements of the build, we also supply products in special colours and finishes including bronze, brass, gold and chrome to meet Architectural design specifications. C O L M A N Air Distribution ENGINEERED AIR PRODUCTS Colman Air Distribution Limited Unit 7, High Carr Business Park Decade Close, Newcastle-Under-Lyme Stoke-on-Trent, Staffordshire ST5 7UH We reserve the right to alter specifications without notice and products will sometimes be supplied with modifications which do not strictly comply with the descriptions and illustrations in this publication. Telephone: +44 (0)1782 564383 www.colmanad.com DW /09.17/1